PRODUCT DATASHEET European Region + 44 (0) 208 920 2306 www.energizer-eu.com Energizer AC675 - Mercury Free Specifications (top view) (bottom view) Industry Standard Dimensions (mm) Chemical System: Tab Color: Designation: Nominal Voltage: Typical Capacity: Zinc Air (Zn/O2) Blue IEC-PR44 1.4 Volts 635 mAh (to 0.9 volts) (Rated at 326 ohms at 21°C/50% RH) Typical Weight: Typical Volume: 1.9 grams 0.5 cubic centimeters Impedance (-) 3.80 Minimum The total opposition that a battery offers to the flow of alternating current. Impedance is a combination of resistance and reactance. 0.25 Minimum 1.50R Typical 4.82 4.60 5.40 5.00 (+) The typical impedance of these cells on open circuit and during useful discharge varies from 5-20 ohms. This applies over a frequency range of 40-5,000 hertz at the current drains shown below. 11.60 11.25 Impedance vs. Frequency Typical Discharge Characteristics Schedule: 16 hours/day Typical Drain @ 1.3V: 2.1 & 1.3 milliamperes Load: 625 & 1,000 ohms 00% DoD 10 25% DoD 50% DoD 8 80% DoD 6 4 2 0 1.3 0.1 1.2 1 10 100 1000 Frequency (Hz) 10000 100000 1.1 Impedance vs. Depth of Discharge 1.0 0.9 625 25 1,000 0.8 0 100 200 300 400 500 600 Service, Hours Simulated Application Test Typical Performance at 21°C & 50% RH Schedule: Typical Drains: at 1.3V (milliamperes) 16 Hours/Day 16 Hours/Day 2.1 1.3 Load (ohms) 625 1,000 Cutoff 0.9V (hours) 302 488 Impedance (ohms) Operating Voltage 1.4 Impedance (ohms) 12 20 15 10 40 Hz 5 0 1K Hz 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Depth of Discharge Important Notice This datasheet contains typical information specific to batteries manufactured at the time of its publication. Contents herein do not constitute a warranty. ©Energizer Holdings, Inc. - All Rights Reserved Engineering Data Form No. EBC - 8838EU Page 1 of 1