MS2DLED - Energizer Technical Information

2D LED Flashlight
MS2DLED
INTRINSICALLY
SAFE
Asia Pacific Region
• Approved by global
agencies for intrinsically
safe lights
• Division 1, Class 1 rated
WATERPROOF
• Meets IEC 60529 IPX7
standards
• Continues to operate
after submersion in 1
meter of water for 30
minutes
IMPACT RESISTANT
1
Approved by global safety agencies, the
MS2DLED is ideal for work in harsh
conditions. The light is waterproof,
dustproof and survives a 1-metre drop
test.
A built-in carabiner belt clip makes for
easy access, while the internationally
approved orange safety color provides
instant recognition. The White LED lamp
supplies steady, bright illumination for
about 68 hours between battery changes
using Energizer® MAX® batteries.
50.8 mm
1
64.8 mm
• Survives a 1-metre drop
• Shatterproof lens
201.4 mm
RELIABLE
• 68 hour run time using
Energizer® MAX®
batteries
Asia Pacific Region
68
• UL/CUL intrinsic safety for hazardous locations
Class I Div. 1 Groups A,B,C, & D, Class II Div. 1
Groups E,F,&G, and Class III Div. 1; T4.
• MSHA for methane-air mixtures.
• ATEX intrinsically safe flashlight for
IM2/II1G
EEx ia I/IIC T4
• IECEx intrinsically safe flashlight for Ex ia IIC T4
• -20°C to 40°C ambient operating range.
•
0539
• EN60529 ingress protection level IP67.
Before Using Your Flashlight:
Please read all instructions and cautionary
markings on the package and light
Form No. EBC 9111APC
Tested according to ANSI/NEMA FL 1 Standards.
Important Notice
This datasheet contains information specific to products
manufactured at the time of its publication
Contents herein do not constitute a warranty
©Energizer / All Rights Reserved
1-800-383-7323 USA/CAN