PS545L PS545L S . SCHOTTKY BARRIER RECTIFIERS 5 .0AMP .0AMPS FEATURE MECHANICAL DATA .For surface mounted application .High current capability .Low forward voltage drop .Low power loss, high efficiency .High surge current capability .High temperature soldering guaranteed: 260℃/10 seconds at terminals. .Terminal: Solder plated .Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy -277 B PS PS-277 -277B NO Dimensions NO Dimensions A 1.20±0.1 e 1.84Typ A2 0.25±0.05 E1 5.3±0.1 b1 0.9±0.1 E2 3.5±0.1 b2 1.8±0.1 L 0.8±0.15 D 3.95±0.1 L1 0.6±0.1 D2 3.05Typ W 1.3±0.2 E 6.4±0.1 All Dimensions in mm MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20% SYM Type Number PS545L BOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Average Forward Rectified Output Current VRRM VRMS VDC IF(AV) units 45 V 31.5 V 45 V 5.0 A IFSM 120.0 A VF 0.45 V Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage @IF=5A Maximum DC Reverse Current @TA=25°C at rated DC blocking voltage @TA =100°C Typical Junction Capacitance (Note1) Typical Thermal Resistance (Note2) Storage Temperature Operating Junction Temperature 0.3 IR 20.0 CJ R(JA) TSTG TJ 500 pF 31 °C /W -55 to +150 °C -55 to +150 °C Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 2. Polymide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 14.4mm. 1 mA PS545L RATING AND CHARACTERISTIC CURVES (PS545L PS545L)) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 5.0 INSTANEOUS FORWARD CURRENT,(A) AVERGE FORWARD RECTIFIED CURRENT,(A) 100 2.5 Single Phase Half Wave 60Hz Resistive or inductive Load 0 0 50 100 150 10 TJ=25℃ Pulse Width=300 μs 1% Duty Cycle 1 .1 200 .2 0.8 .5 1.1 1.4 INSTANEOUS FORWARD VOLTAGE,(V) LEAD TEMPERTURE,(℃) FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-MAXIMUN NON-REPETITIVE FORWARD SURGE CURRENT 160 8.3ms Single Half Sine-Wave (JEDEC Method) 120 INSTANEOUS REVERSE CURRENT,(mA) PEAK FORWARD SURGE CURRENT,(A) 10 80 40 0 0 10 1.0 TJ=25 ℃ .1 .01 100 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) NUMBER OF CYCLES AT 60Hz 2 140 PS545L Marking Pad Layout 、MOQ MOQ and Packaging illustr ation Marking、Pad illustration Marking 1、Marking SYMBOL A B C Suggested Pad Layout 2、Suggested Explanation Product Name Trademark Date Code Dimensions Value (in mm mm)) Z 6.6 X1 1.4 X2 3.6 Y1 0.8 Y2 4.7 C 3.87 E1 0.9 MOQ 3、MOQ 3000pcs / Tape & Reel 4、Packaging Packaging d Top cover tape thickness 0.10mm(0.004") max.thick W1 W1 Embossed carrier tape °MAX ° MAX A SPECIFICATIONS mm(inch) SYM ITEM BOL A Carrier width B Carrier length Embossed cavity SPECIFICATIONS mm(inch) SYM ITEM BOL K Carrier depth P Punch hole pitch PACKAGE PS-277B 4.45(0.175)Max 7.0(0.276)Max Sprocket hole d ø1.55(0.061)Typ Reel outer diameter D Reel inner diameter Feed hole diameter PACKAGE PS-277B 1.60(0.063)Typ 8.00(0.315)Typ Sprocket hole pitch P0 4.00(0.157)Typ 330.0(13.0)Typ Embossment center P1 2.00(0.079)Typ D1 74.0(2.913)Min Overall tape thickness T 0.25(0.010)Typ D2 13.0(0.512)Typ Tape width W 16.0(0.630)Typ Sprocket hole position J 1.75(0.069)Typ Reel width W1 16.5(0.650)Min Punch hole position H 7.50(0.295)Typ 3