TH09/2479 TH97/2478 www.eicsemi.com S15VB20 ~ S15VB60 IATF 0113686 SGS TH07/1033 SILICON BRIDGE RECTIFIERS BR50 PRV : 200 ~ 600 Volts Io : 15 Amperes 0.728(18.50) 0.688(17.40) FEATURES : * * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Ideal for printed circuit board Pb / RoHS Free 0.685(16.70) 1.137(28.90) 0.618(15.70) 1.114(28.30) 0.570(14.50) 0.530(13.40) 0.210(5.30) 0.200(5.10) 0.658(16.70) 0.618(15.70) MECHANICAL DATA : 0.252(6.40) 0.248(6.30) φ 0.100(2.50) 0.090(2.30) 0.032(0.81) 0.028(0.71) * Case : Molded plastic with heatsink integrally mounted in the bridge encapsulation * Epoxy : UL94V-O rate flame retardant * Terminals : plated .25" (6.35 mm). Faston * Polarity : Polarity symbols marked on case * Mounting position : Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency. * Weight : 17.1 grams 0.905(23.0) 0.826(21.0) 0.310(7.87) 0.280(7.11) Metal Heatsink Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified . Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL S15VB20 S15VB60 UNIT Maximum Reverse Voltage VRM 200 600 V Maximum Average Forward Current Tc= 83°C IF(AV) 15 A IFSM 200 A Current Squared Time at2ms ≤ t < 10 ms. Tc = 25 °C I2t 200 A2S Maximum Forward Voltage per Diode atFI = 7.5 A VF 1.05 V IR 10 μA RθJC 2.3 °C/W TJ 150 °C TSTG - 40 to + 150 °C Maximum Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Maximum DC Reverse Current at VR = VRRM (Pulse Measurement, Rating of per diode) Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Temperature Range Notes : 1. Thermal Resistance from junction to case with units mounted on a 5" x 4" x 3" (12.7cm.x 10.2cm.x 7.3cm.) Al.-Finned Plate Page 1 of 2 Rev. 03 : November 20, 2008 TH09/2479 TH97/2478 www.eicsemi.com IATF 0113686 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( S15VB20 ~ S15VB60 ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 300 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 18 15 12 9 HEAT-SINK MOUNTING, Tc 5" x 4" x 3" THK. (12.7cm x 12.7cm x 7.3cm) Al.-Finned plate 6 3 0 250 T J = 25 °C 200 150 100 50 50 Hz Sine Wave, Non-repetitive 1 Cycle Peak Value 0 0 25 50 75 100 125 150 175 1 CASE TEMPERATURE, ( °C) 4 6 10 20 40 60 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES FIG.3 - TYPICAL FORWARD CHARACTERISTICS PER DIODE 100 FORWARD CURRENT, AMPERES 2 NUMBER OF CYCLES AT 60Hz 10 Pulse test per one diode 1.0 T J = 25 °C 0.1 PER DIODE 10 T J = 100 °C 1.0 T J = 25 °C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 03 : November 20, 2008