Certificate TH97/10561QM MBR2035CT ~ MBR2060CT Certificate TW00/17276EM DUAL SCHOTTKY BARRIER RECTIFIERS PRV : 35 ~ 60 Volts Io : 20 Amperes TO-220AB 0.154(3.91)DIA. 0.415(10.54)MAX. 0.148(3.74) FEATURES : * Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 * Dual rectifier construction, positive center tap * Metal silicon junction, majority carrier conduction * Low power loss, high efficiency * Guardring for overvoltage protection * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering : 250°C/10 seconds, 0.25" (6.35mm) from case * Pb / RoHS Free 0.113(2.87) 0.103(2.62) 0.185(4.70) 0.175(4.44) 0.055(1.39) 0.045(1.14) 0.145(3.68) 0.135(3.43) 0.635(16.13) 0.625(15.87) 0.603(15.32) 0.573(14.55) 0.350(8.89) 0.330(8.39) 1 2 3 0.160(4.06) 0.140(3.56) PIN 1 0.560(14.22) 0.530(13.46) PIN 2 CASE PIN 3 0.037(0.94) 0.027(0.68) 0.205(5.20) 0.195(4.95) 0.022(0.56) 0.014(0.36) 0.105(2.67) 0.095(2.41) MECHANICAL DATA : * Case : JEDEC TO-220AB molded plastic body * Terminals: Plated leads, solderable per MIL-STD-750 Method 2026 * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS ( Tc = 25 °C unless otherwise noted) SYMBOL MBR 2035CT MBR 2045CT MBR 2050CT MBR 2060CT UNIT Maximum Repetitive Peak Reverse Voltage VRRM 35 45 50 60 V Maximum RMS Voltage VRMS 35 45 50 60 V Maximum DC Blocking Voltage VDC 35 45 50 60 V RATINGS Maximum Average Forward Current at TC = 135 °C Total device Per leg Peak Forward Surge Current, 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Per leg 20 IF(AV) A 10 IFSM 150 A Maximum Instantaneous Forward Voltage per leg (Note 1) - 0.80 0.57 0.70 at I F = 20 A, TC = 25 °C 0.84 0.95 at I F = 20 A, TC = 125 °C 0.72 0.85 at I F = 10 A, TC = 25 °C VF at I F = 10 A, TC = 125 °C V Maximum Reverse Current at Rated DC T C = 25 °C IR 0.1 0.15 mA Blocking Voltage per leg (Note 1) T C = 125 °C IR(H) 15 150 mA Typical Thermal Resistance from Junction to Case Per leg Operating Temperature Range Storage Temperature Range RÓ¨JC 2.0 °C/W TJ - 65 to + 150 °C TSTG - 65 to + 175 °C Note : (1) Pulse test : 300 µs pluse width, 1% duty cycle Page 1 of 2 Rev. 01 : March 7, 2006 Certificate TH97/10561QM Certificate TW00/17276EM RATING AND CHARACTERISTIC CURVES ( MBR2035CT ~ MBR2060CT ) FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 150 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 20 16 12 8 4 120 90 60 TJ =TJmax 8.3 ms single half sine-wave (JEDEC Method) 30 Resistive or Inductive Load 0 0 0 25 50 75 100 125 150 1 CASE TEMPERATURE, (°C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER LEG 100 10 TJ = 125 °C INSTANTANEOUS FORWARD CURRENT, (A) Pluse Width = 300 µs 1% Duty Cycle INSTANTANEOUS REVERSE CURRENT, (mA) 10 TJ = 25 °C 1.0 0.1 1.0 MBR2035CT & MBR2045CT MBR2050CT & MBR2060CT 0.1 0.01 TJ = 25 °C MBR2035CT & MBR2045CT MBR2050CT & MBR2060CT 0.01 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE, (V) Page 1 of 2 1.0 1.1 1.2 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) Rev. 01 : March 7, 2006