2W005 THRU 2W10 SINGLE PHASE SILICON BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Ampere FEATURES ● ● ● WOB Ideal for printed circuit board Surge overload rating: 50A peak High case dielectric strength MECHANICAL DATA Case: UL-94 Class V-0 recognized Flame Retardant Epoxy ● Terminals : Plated leads solderable per MIL-STD 202E, method 208C ● Mounting Position: Any ● Weight: 1.10 g ● Marking: Type Number ● MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. SYMBOL 2W005 2W01 2W02 2W04 2W06 2W08 2W10 UNITS Maximum Recurrent Peak Reverse Voltage V RRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 CHARACTERISTICS o Maximum Average Forward Output Current at T A = 25 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum DC Forward Voltage Drop per Bridge Element at 2.0A DC Maximum Reverse Current at rated @T A = 25 oC DC Blocking Voltage per element @T A = 125 o C I 2t Rating for Fusing (t<8.3ms) Typical Junction Capacitance ( Note1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range V IO 2.0 A I FSM 50 A VF 1.0 V IR 10.0 500 uA I2t 10 CJ 24 R θJ A 36 0 -55 to + 150 0 T J, T STG NOTES : 1. Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13x13mm) copper pads. A 2 Sec pF C/W C 2W005 THRU 2W10 RATINGS AND CHARACTERISTIC CURVES 10 2.0 IF, INSTANTANEOUS FORWARD CURRENT (A) IF, AVERAGE FORWARD CURRENT (A) Single phase half-sine-wave 60Hz resistive or inductive load 1.5 1.0 0.5 0 0 25 50 75 100 125 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.1 Tj = 25°C Pulse width = 300µs 0.01 150 0.2 0.6 1.0 1.4 V F, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element 100 60 Tj = 25°C f = 1mz Pulse Width 8.3 ms Single Half-Sine-Wave (JEDEC Method) Cj, JUNCTION CAPACITANCE (pF) 50 40 30 20 10 0 1 10 1 100 10 1 NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current 10 V R, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 200 IR , INSTANTANEOUS REVERSE CURRENT (µA) IFSM , PEAK FORWARD SURGE CURRENT (A) 1.0 100 Tj = 100°C 10 1.0 Tj = 25°C 0.1 0.01 120 0 40 80 160 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics 100