D-Sub Right Angle DIP Termination 17LE Series 17LE-13150-27-FA 17LE-23250-27-FA 17LE-13370-27-FA FEATURES ・17LE series are connected to a circuit by through hole DIP solder termination style mounting on PCB and fastened on the bracket by stud or jack socket. ・Number of contact : 9, 15, 25 and 37 ・Studs and hex nuts are available to fasten with mating half. This connection with PCB and metal shell is grounding and improving the resistance against EMI. ・The metal shell is in Nickel plating. The pin connectors of metal shell are beat-finished. ・4 types of ground tabs are mountable on the bracket for protection against EMI. SPECIFICATIONS Rated Voltage 300V AC (r.m.s.) Rated Current 5A / Contact Dielectric Withstanding Voltage 1000V AC (r.m.s.) / 1 minute Insulation Resistance 1000M Ω (min.) at 500V DC Contact Resistance 15m Ω (max.) Operating Temperature -25℃〜 85℃ MATERIAL / FINISH RoHS Compliant Compliant Item Material / Finish Insulator Polyamide Resin (UL94V-0）/ Black Shell Steel / Ni Plating Contact Eyelet Copper Alloy / Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag Plating over Ni Plating Brass / Ni Plating ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 121003 http://www.ddknet.co.jp 17LE Series Unit：mm ○ Right Angle Socket Connectors 17LE-13250-27(D3AB)-FA FA: Lead Free Mating Style １: Socket Connector Deviation ※ Regarding the combinations of grounding tab, stud and jack socket, please refer to the list on page 6. Shell Plating ３: Ni Plating No Digit: Connector Only （D3AB) Number of Contact 9, 15, 25, 37 Grounding Tab (Please refer to page 4.) No Digit: Less Grounding Tab B：with Ground Tab 17L-004B C：with Board Lock 17L-004C-FA D：with Ground Tab 17L-004D H/K: with Board Lock 17L-004E-FA ※ Ground tab B and D can not be combined with stud. Key Position 0: No Key Contact Tail Style 2: Right Angle DIP Termination Contact Plating 7: Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag over Ni Plating Thread Size A：M2.6×0.45 B：M3×0.5 C：＃ 4-40UNC 2: with Stud Type1 (17L-002 □ ) 3: with Jack Socket Type 2 (17L-003 □ 1) 4: with Jack Socket Type 3 (17L-003 □ 3) ・□ : Thread Type A, B, C 17LE-13xx0-27(D3xx)-FA Socket Connector A B D (E) Ｊ (6.25) Thread Size （Refer to part number code） (6.25) 0.3 1 (n+1)/2 Contact No.1 Contact 2.28 (9.6) F G 0.1 n-φ1.0 0.1 0.1 Through Hole 2-φ3.2 Fixed with adhesive part DDK n+3 2 6.25 n Contact No. Number of Contact 0.1 n+1 2 D 0.1 B 0.1 PCB Mounting Dimensions （Applicable PCB Thickness:ｔ＝１． ６ （View from mounting pattern side) Section Y−Y 3.2 1 F M3 0.5 Thread 2.84 0.1 M3 0.5 Thread E 0.5 0.8 2.84 2.84 6.1 12.6 0.1 Panel Mounting Dimensions(Rear Mounting) 9.6 0.3 B 6.4 Y (Ｂ) 4-R2.5 R Y 0.5 X 10.0 0 7.8 12.5 n X +0.3 2.84 6.5 0.7 H 0.2 (n+3)/2 Contact +0.3 0 No.n Contact C A B C D E F G H J 9 30.80 24.99 33.32 16.30 24.64 10.98 1.37 2.74 2.74 8.22 16.44 18.50 31.00 25 53.04 47.04 38.35 33.12 1.38 2.76 30.36 40.70 53.20 37 69.32 63.50 54.80 49.68 1.38 2.76 46.92 57.00 69.50 15 39.10 19.20 1.37 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 26.80 39.30 0.19） 0.1 Through Hole 17LE Series Unit：mm ○ Right Angle Plug Connectors 17LE-23250-27(D3AB)-FA FA: Lead Free Connector Type 2: Plug Connector Deviation ※ Regarding the combinations of grounding tab, stud and jack socket, please refer to the list on page 6. Shell Plating ３: Ni Plating No Digit: Connector Only （D3AB) Number of Contact 9, 15, 25, 37 Grounding Tab (Please refer to page 4.) No Digit: Less Grounding Tab B：with Ground Tab 17L-004B C：with Board Lock 17L-004C-FA D：with Ground Tab 17L-004D H/K: with Board Lock 17L-004E-FA ※ Ground tab B and D can not be combined with stud. Key Position 0: No Key Contact Tail Style 2: Right Angle DIP Termination Thread Size A：M2.6×0.45 B：M3×0.5 C：＃ 4-40UNC Contact Plating 7: Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag over Ni Plating 2: with Stud Type1 (17L-002 □ ) 3: with Jack Socket Type 2 (17L-003 □ 1) 4: with Jack Socket Type 3 (17L-003 □ 3) ・□ : Thread Type A, B, C 17LE-23xx0-27(D3xx)-FA Plug Connector A B C D (E) +0.3 0 Ｊ Thread Size （Refer to part number code.） 0.7 (6.25) H (6.25) 0.3 6.5 +0.3 10.0 0 No.1 Contact 4-R2.5 R B 2.28 (9.6) 0.5 Ｍ３ 0.5 Thread １ n+3 2 Number of Contact F F SectionY−Y G 0.1 D 0.1 B 0.1 n-φ1.0 0.1 0.1 A B C D E F G H J 9 30.80 24.99 16.80 10.98 1.37 2.74 2.74 8.22 16.44 18.50 31.00 25 53.00 47.04 38.84 33.12 1.38 2.76 30.36 40.70 53.20 37 69.30 63.50 55.30 49.68 1.38 2.76 46.92 57.00 69.50 15 39.10 33.32 25.12 19.20 1.37 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 0.1 Through Hole 2-φ3.2 PCB Mounting Dimensions （Applicable PCB Thickness：ｔ＝１． ６ （View from mounting pattern side） 3.2 ｎ E 6.25 DDK n+1 2 2.84 Ｍ３ 0.5 Thread 2.84 0.8 Fixed with adhesive part Contact No. 12.6 9.6 0.5 Y (B) 0.1 Panel Mounting Dimensions(Rrear Mounting) 5.9 0.3 6.4 Y 0.1 Through Hole 0.1 X (n+1)/2 Contact 2.84 8.25 n 1 X 12.5 2.84 (n+3)/2 Contact 0.2 No.n Contact 26.80 39.30 0.19） 17LE Series Unit：mm ○ Ground Tab Ground Tab for 17LE Ground tab enables 17LE series to ground to PCB easily. Ground Tab with Tapping Hole Part Number : 17L-004B Material / Finish: Steel / Ni Plating ※ Combination of stud 17L-002 □ is not available. Thread M3×0.5 Ground Tab with Thrugh Hole Part Number : 17L-004D Material / Finish: Steel / Ni Plating ※ Combination of stud 17L-002 □ is not available. φ 3.2 Hole Ground Tab with Board Lock Part Number : 17L-004C-FA Material / Finish: Copper Alloy / Sn-Ag Plating φ 3.2 Hole Ground Tab with Board Lock Part Number : 17L-004E-FA Material / Finish: Copper Alloy / Sn-Ag Plating Thread M3.5x0.5 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 17LE Series ○ Mounting on Panel and PCB Panel 2-φ3.2 4-R2.5 M3 0.5 Thread 2-φ3.2 B 0.1 0.1 Jack 4-R3.4 Socket (17L-003 □ 1) 2-φ3.2 0.1 4-R3.4 0.1 min. LL min. B B 0.1 0.1 B Hex Nut Nut Hex 0.1 L min. B 7.8 4.8 Connector Connector 10 Jack Socket Jack Socket M3 0.5 Thread Scre 0.1 2-φ3.2 0.1 2-φ3.2 Connector 0.2 +0.3 6.5 0.2 +0.310.0 0 10.0 0 +0.3 10.0 0 6.5 4-R3.4 0.1 B Hex Nut 4-R3.4 0.1 10 Connector L min. 10 Jack Socket B 0.1 L min. B Hex 0.1 Number of Contact B H J K L 9 24.99 18.50 31.0 34.09 20.50 15 33.32 26.80 39.3 42.42 28.80 25 47.04 40.70 53.2 56.14 42.50 37 63.50 57.00 69.5 72.60 59.10 Ground Tab Ground Tab Ground Tab Ground Tab Ground Tab Ground Tab 6.5 +0.3 Screw Screw (not attached) (not attached) Screw (not attached) 0.1 Panel Mounting Dimensions(Rear Mounting) E F G 0.1 0.1 n-φ1.0 0.1 Through Hole 2-φ3.2 0.1 Through Hole Number of F 0.1 D 0.1 B 0.1 2.84 0.1 Contact PCB Mounting Dimensions （Applicable PCB Thickness:ｔ＝１． ６ （View from mounting pattern side) 9 B D E F G 24.99 10.98 1.37 2.74 8.22 16.44 15 33.32 19.20 1.37 2.74 25 47.04 33.12 1.38 2.76 30.36 37 63.50 49.68 1.38 2.76 46.92 0.19） ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 Hex Nut Hex Nu 10.0 0 B He 4-R3.4 Jack Socket 10 Connector L min. Jack Socket Hex Nut M3 0.5 Thread 4-R2.5 R Hex N 0.1 ※ Connector can be fastened on the panel. （Panel Thickness：0.8 ～ 1.3） (6.25) Hex Nu 0.2 6.5 R 2-φ3.2 0.2 Applicable PCB Thickness 1.6 0.19 Applicable PCB Thickness 1.6 0.19 Applicable PCB Thickness 1.6 0.19 Screw Pan 0.1 B Hex Nut M3 0.5 Thread 0.1 Thread SIze M2.6×0.45 M3×0.5 #4-40UNC Ground Tab Ground Tab (Board Lock) (Board Lock) Ground Tab +0.3 Ｊ0 (Board Lock) (6.25) H 0.3 Pan-he ※ Connector can not be fastened Jack Socket (17L-003 □ 3) □: Ａ: Ｂ: Ｃ: 4-R2.5 B Type 3 4-R3.4 Connector 10 Jack Socket L min. Hex Nut 0.1 B L min. M3 0.5 Thread 0.1 10 7.8 4.8 1100 M3 0.5 Thread on the panel. 7.8 0.1 2-φ3.2 11.4 min. 11.4 min. 11.4 min. B 7.8 4.8 L min. 10 M3 0.5 Thread 4-R3.4 4-R3.4 M3 0.5 Thread 7.8 11.4 min. 11.4 min. ead M3 0.5 Thread 4-R3.4 4.8 0.1 0.1 7.84.8 2-φ3.2 2-φ3.2 13.0 min. 13.0 min. 13.0 min. 13.0 min. 13.0 min. 13.0 min. 0.2 6.5 0.2 6.1 6.5 Jack Socket Socket Jack 0.1 R R B M3 0.5 Thread R +0.3 0 M3 0.5 Thread Jack Socket Connector Connector 6.5 6.1 6.5 R J +0.3 0 4-R2.5 B 0.1 Hex Nut Nut H 0.3 Hex 6.1 +0.3 0 10.0 6.5 0.2 6.5 M3 0.5 Thread Connector 0.3 Screw ※ Connector can not be fastened on 4-R1.0 the panel. J +0.3 Connector 0 Hex Nut 4-R1.0 H 0.3Jack Socket Connector Hex Nut J +0.3 0 Jack Socket 4-R2.5 +0.3 H J0.3 0 Connector Hex Nut 0.3 B 0.1H Jack Socket 4-R2.5 Type 2 11.4 min. 11.4 min. 11.4 min. B 0.1 0.1 Hex NutH 4-R2.5 6.5 4-R2.5 4-R2.5 0.1 4-R1.0 10.0 B 6.5 6.1 0.3 0.3 6.5 6.1 H H J +0.3 0 0.3 JH+0.3 0 K min. 4-R1.0 +0.3 +0.3 0 0 +0.3 10.0 10.0 10.0 0 4-R1.0 R R +0.3 JJ +0.3 0 0 6.5 R 4-R2.5 0.3 6.1 H 0.2 J +0.3 0 K min. 4-R1.0 Connector K min. Screw P Pan-head Connector K min. Stud Panel Pan-head Connector Connector Screw Screw Stud (17L-002 □ ) 4-R1.0 4-R1.0 ead ad Pan-head Pan-head Stud Connector Screw Pan-head Screw 6.5 4-R1.0 Stud K min. Stud Panel Pan-head Type 1 Connector 4.8 K min. min. K Stud Pan-head K min. Panel Screw Panel 13.0 min. 13.0 min. K min. Stud Panel MountingDimensions Panel 0.2 （□ : Thread Size) ead ead ad Unit：mm 17LE Series t=1.6 t=1.6 ○ 17LE Series Mounting Accessories Deviation M3 0.5 M3 0.5 Unit：mm t=0.6 φ3.2 Hole φ3.2 Hole ※ ASSEMBLED: The mounting accessories are assembled with connector. ATTACHED: The mounting accessories are attached separately. 17LE-13 □□ 0-27-FA 17LE-23 □□ 0-27-FA 17L-004B Panel Mounting Operation None t=1.6 t=1.6 t=1.6 t=1.6 t=1.6 t=0.6 M3 0.5 M3 0.5 φ3.2 Hole φ3.2 Hole Stud 17L-004C-FA t=0.8 M3 M3 0.5 0.5 M30.5 0.5 M3 6.5 t=1.6 t=1.6 M3 t=1.6 t=1.6 M3 M3 0.5 0.5 M30.5 0.5 M3 M3 0.5 Jack Socket t=0.6 t=0.6 t=0.6 t=0.6 φ3.2 HoleHole φ3.2 φ3.2 Hole φ3.2 Hole φ3.2 HoleHole φ3.2 φ3.2 Hole φ3.2 Hole 4.8 7.8 t=0.6 M3 0.5 M3 Press in ground tab 17L-004E-FA φ3.2 Hole t=0.8 None φ3.2 Hole t=1.6 t=1.6 M3 0.5 M3 0.5 φ3.2 Hole 17L-002 □ Connector can not 6.1 be fastened on the panel.6.5 M3 t=0.8 t=0.6 φ3.2 Hole Type 1 17LE- □ 3 □□ 0-27(D41)-FA M3 0.5 M3 0.5 t=1.6 M3 0.5 Stud 6.1 17L-002 □ and pan- 6.1 6.1 6.1 head screw(L=6) t=1.6 are 6.5 6.5 M3 0.5 6.5 6.5 ASSEMBLED. t=0.6 M3 M3 M3 M3 φ3.2 Hole φ3.2 Hole 17LE- □ 3 □□ 0-27(D2 □ )-FA4.8 4.8 Ground tab 17L-004C-FA is t=0.8 fastened by stud M3 0.5 17L-002 □ and panhead screw (L=7). 4.8 4.8 4.8 7.8 7.8 7.8 7.8 7.8 M3 t=1.6 t=1.6 t=1.6 6.5 Type 2 M3 φ3.2 Hole Connector can not be fastened on the panel. To prevent loosening, screws are locked by adhesive. 4.8 7.8 M3 t=1.6 17L-003 □ 1 φ3.2 Hole Type 3 Connector can be fastened on the panel. Panel thickness: 1.3 max. Press in ground tab Press in ground tab hex nut(M3) are socket 17L-003 □ 1 socket 17L-003 □ 1 17L-003 □ 1 and is ASSEMBLED. is ASSEMBLED. Press in ground tab 17L-004E-FA and jack socket 17L-003 □ 1 is ASSEMBLED. 17LE- □ 3 □□ 027(D3 □ H)-FA t=0.8 M3 0.5 M3 Press in ground tab Press in ground tab M3 hex nut(M3) are socket 17L-003 □ 3 socket 17L-003 □ 3 17L-003 □ 3 and ASSEMBLED. 4.8 7.8 17L-004D and jack Jack socket 17L-003 □ 3 6.5 17L-004B and jack M3 4.8 φ3.2 Hole 7.8 6.1 M3 0.5 17LE- □ 3 □□ 0-27(D3 □ )-FA 17LE-□3□□0-27(D3□B)-FA 17LE-□3□□0-27(D3□D)-FA 6.1 t=0.6 M3 0.5 φ3.2 Hole φ3.2 Hole socket Jack M3 0.5 ASSEMBLED. 6.5 t=0.8 t=0.6 φ3.2 Hole t=0.8 t=0.6 M3 0.5 17LE-□3□□0-27(D2□C)-FA M3 M3 M3 M3 M3 0.5 M3 0.5 6.1 t=0.8 t=0.8 t=0.8 t=0.8 M3 M3 0.5 0.5 M30.5 0.5 M3 Part Number 17LE- □ 3 □□ 0-27-FA t=1.6 17L-004E-FA 6.1 Ground Tab Part Number t=1.6 17L-004D 17L-004B and jack 17L-004D and jack is ASSEMBLED. is ASSEMBLED. Press in ground tab 17L-004E-FA and jack socket 17L-003 □ 3 is ASSEMBLED. 17LE- □ 3 □□ 027(D4 □ K)-FA 17LE- □ 3 □□ 0-27(D4 □ )-FA 17LE-□3□□0-27(D4□B)-FA 17LE- □ 3 □□ 0-27(D4 □ D)-FA M3 Recommended □ : Thread Size (Stud) A：M2.6×0.45 B：M3×0.5 C：＃ 4-40UNC ※ Above list shows combinations of ground tab, stud and jack socket. The deviation is given in parentesis in each sections. Slanting line means "not available". Regarding the detail, please contact our sales. ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 6 t= M