Shielded IDC Flat Cable Connector 57FE Series 10 Type （Plug for Rack and Panel） 20 Type （Receptacle for Rack and Panel） 30 Type （Cable Plug） 40 Type （Panel Receptacle） FEATURE ● 57FE series is a shielded IDC connectors for flat cable. It is covered the interface by the metal plates for EMC. SPECIFICATIONS Rated Voltage 250V AC (r.m.s.) Rated Current 1A / Contact Dielectric Withstanding Voltage 500V AC (r.m.s.) / 1 minute Insulation Resistance 1000M Ω min. at 500V DC Contact Resistance 35m Ω max. Operating Temperature － 55℃～＋ 105℃ Applicable Cable Cable Pitch : 1.27mm AWG#28 (Solid Cable, Stranded Cable) AWG#30 (Solid Cable) MATERIAL/ FINISH RoHS Compliant Compliant Item 150622 Material / Finish Insulator PC Resin（UL94V-0）/ Blue Contact Copper Alloy / Au over Ni Plating Shell Copper Alloy / Ni Plating (57FE-20, 40 Type) Strain Relief Polycarbonate（UL94V-0）/Blue, or Stainless Steel（36, 50 contacts） Ground Tab Copper Alloy / Ni Plating（57FE-10, 30 Type） Bail Lock Stainless Steel（57FE-40 Type） Metal Hood Aluminum Alloy / Gray（Outside Only） Plastic Hood ABS Resin / Ni Plating Boot PVC（57FE-30 Type） ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 57FE Series Unit：mm ○ Plug for Rack and Panel 57FE- 10360- 20 Cover Style 0：Open-ended Cover, Blue A：Close-ended Cover, Blue(for 24 and 36pin only) FE：Shield Type Number of Contact 24, 36, 50 Contact Plating 2：Au0.4 μ m over Ni Plating A B C 9 2-φ3.2Hole Open-ended Cover G 9 18.6 2.0 E 3.5 G 9.5 1.27 E Close-ended Cover 1.27 A B C D E 24 54.78 46.78 39.4 23.749 29.21 36.3 36 67.74 59.74 52.2 36.703 44.45 51.5 50 82.85 74.85 67.4 51.816 62.23 68.5 +0.2 F 0 +0.2 15.5 0 4-R5.0 max. °±1 15 H B with Strain without Strain Relief Relief 9.1 46.78 36.8 38.7 40.1 36 59.74 52.0 53.9 53.0 50 74.85 69.0 70.9 68.2 2 10.0 F 24 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. A Please varify the latest specifications with our drawings. 7.0 Ｂ ±0.2 2-φ3.2±0.1Hole °±1 15 Ｂ ±0.2 +0.2 15.5 0 4-R5.0 max. B±0.2 Number of Contact 2-φ3.2±0.1Hole ５７Ｆ－ＸＸ ● Rear Mounting Type 2-φ3.3±0.1Hole B±0.2 4-R4.0 max. F 0 7.0 7.0 +0.2 15.5 0 +0.2 10.0 2-φ3.3±0.1Hole ５７Ｆ－ＸＸ H 0 8.4 +0.2 H 0 ● Front Mounting Type 4-R4.0 max. J 9.1 H ■ Panel Mounting Dimensions +0.2 ５７Ｆ－xx G 5.0 Number of Contact http://www.ddknet.co.jp 15 57F-XX +0.2 (After 20.1 Assembled) 9 2.0 No.n Contact 18.6 9.5 (After 20.1 Assembled) No.n/2 +1 Contact 57F-XX No.n Contact 15 No.n/2 Contact 5.3 D 15.5 0 15.1 2-φ3.2Hole 2.159 No.n/2 +1 Contact 15.1 No.1 Contact 2.159 A B C G No.n/2 Contact 5.3 D No.1 Contact +0.2 F 0 2-φD±0.1Hole °±1 15 57F E-20360- 20S +0.2 15.5 0 4-R5.0 max. 2-φD±0.1Hole Ｂ ±0.2 Strain Relief No digit： No Strain Relief S ：With Plastic Strain Relief K ：With Metal Strain Relief（for 36,50 pin only） °±1 5 1 Contact Number of Ｂ ±0.2 14, 24, 36, 50 Contact Plating 2：Au0.4 μ m over Ni Plating A B C D No.n/2 Contact G G No.1 Contact No.1 Contact 9 A B C D No.n/2 Contact Cover Style 0：Open-ended Cover, Blue A：Close-ended Cover, Blue 5.3 F 0 +0.2 15.5 0 max. and Panel ○ Receptacle for 4-R5.0 Rack +0.2 Unit：mm 5.3 57FE Series Open-ended Cover G 18.6 9 8.7 8.7 2.4 2.4 E Close-ended Cover Contact +0.2 15.5 0 4-R5.0 max. 14 ＊ 9 G Ｂ ±0.2 74.85 +0.2 0 . 57F-XX is 16.2 ＊：When the mating connector is 57FE-10 type, the size Plastic Strain Relief 3.2 9 5.3 51.5 29.3 40.1 53.0 3.2 68.5 15 62.23 68.2 57F-XX 9 G 5.3 Number of Contact 36, 50 No.1 Contact No.n/236 +1 Contact 53.40 57F-XX 51.7 68.7 5.0 Open-ended Cover G 2.4 9 18.6 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. ５７Ｆ－ＸＸ 5.3 70.40 ５７Ｆ－ＸＸ 7.0 50 10.0 ５７Ｆ－ＸＸ 8.7 3 57F-XX 5 7.0 10.0 2.159 - 15 - 38.20 8.4 25.10 7.0 24 5.0 15.1 12 9.1 14 J 8.4 J 9.1 J H Contact 7.0 H Number of H http://www.ddknet.co.jp G 3.2 44.45 23.2 36.3 Close-ended Cover Close-ended Cover 57F-36-042 Number of A Contact B 14, 24, C 36, 50 D ５７Ｆ－ＸＸ 3.2 16.51 29.21 Metal Strain Relief 57F-14-041 No.n Contact Open-ended Cover D F 59.74 50 36.703 B 46.78 36 G 3.5 °±1 15 49.0 64.2 57F-XX 51.816 36.00 G24 23.749 74.85 15 NumberCover of Open-ended 12.954 36.2 G 9 2-φD±0.1Hole 59.74 82.85 9 +0.2 F 0 25.4 E Close-ended Cover 5.3 67.74 57F-XX 36.00 46.78 D G 15 36 54.78 9 ● Rear Mounting Type C 5.3 44.00 50 B 9 14 24 ■ Panel Mounting Dimensions A 15 Contact G 5.3 Number of E 3.5 1.27 No.n/2 Contact 15 57F-XX 1.27 2-φ3.1 min. 15 57F-XX 20.1 （After Assembled） 15 Open-ended Cover G 18.6 （After Assembled） 15 12 No.n/2 +1 Contact 57F-XX 5.3 2.159 57F-XX 5.3 2.159 20.1 （After Assembled） 20.1 No.n Contact No.n/2 +1 Contact 15.1 12 No.n Contact 15.1 2-φ3.1 2-φ3.1 min. min. 57FE Series Unit：mm ○ Receptacle for Rack and Panel(with Jack Socket) 57F E-20500- 20SD35-C G Number of Contatct：14，24, 36, 50 CG：Lead and Cadmium Free Contact Plating 2：Au0.4 μ m over Ni Plating Deviation D35：With Jack Socket Cover Style 0：Open-ended Cover, Blue A：Close-ended Cover, Blue(for 14,24 and 36 pin only) A B C D Strain Relief No Digit： None S ： With Plastic Strain Relief K ： With Metal Strain Relief（for 36,50 pin only） Ｍ３．５×０．６ Thread F min. Panel Thickness 2mm max. +0.2 Ｂ±0.1 8.7 Rear Mounting Type 18.6 （After 6.1 23.2 Assembled） 13 +0.2 0 . ＊：When the mating connector is 57FE-10 type, the size is 16.2 Ｍ３．５×０．６ Thread 1.27 ax. °m 15 15.5 0 ＊ 15.1 4-R5.0 2.159 24 2-φ4.8±0.1 Number of Contact A 14 44.00 36 67.74 24 E 54.78 50 82.85 B C 36.00 25.4 59.74 49.0 46.78 74.85 D 12.954 36.2 23.749 64.2 51.816 36.703 E 16.51 F 29.3 29.21 40.1 62.23 68.2 44.45 53.0 ○ Cable Plug 57F E-30360- 20S Strain Relief No Digit： None S ： With Plastic Strain Relief Number of Contact：14，24, 36, 50 Contact Plating 2：Au0.4 μ m over Ni Plating Ｎｏ．n/2 Contact Number of Contact 14 D E J 25.5 12.954 16.51 17.0 49.2 36.703 44.45 38.0 48.64 39.4 36.4 50 76.74 67.4 64.4 61.62 52.2 (4.75) (3.45) Ｚ Position of Grounding Plate 28.6 C 23.749 51.816 18.6 9.5 37.82 B 24 36 Ｎｏ．n Contact ２．０ 20.1 Ｚ Cover Assembled (23.2) Ｎｏ．n/2 +1 Contact A (2.2) 2.159 Cover Style 0：Open-ended Cover, Blue A：Close-ended Cover, Blue(for 14,24 and 36 pin only) 15.1 Contact Ｎｏ．１ A B C D K ： With Metal Strain Relief（for 36,50 pin only） Section Ｚ-Ｚ E Ｊ 14.3 (1.27) ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 4 Grounding Plate（attached） 29.21 62.23 26.0 53.0 57FE Series Unit：mm ○ With hood and grounding plate 30 Type 57FE-30360- 20N ( D8) -3F Number of Contact 14，24, 36, 50 3F：Lead and Hexavalent Chromium Free Contact Plating 2：Au0.4 μ m over Ni Plating Deviation (D8)：With hood and grounding plate Cover Style 0：Open-ended Cover, Blue A：Close-ended Cover, Blue(for 14,24 and 36 pin only) 57FE-30140-2xN(D8)-3F アルミテープ SHIELD TAPE30 B (13) Sheld tape Cable outer dia.less than C mm. SHIELD:BRAID 10 編組折り返し寸法 12 アルミテ－プ２重巻付幅寸法 Sheld tape SHIELD TAPE ブーツ ＢＵＳＨＩＮＧ (75) L outer dia.less than 8.5mm （参考）Cable 標準電線長さＬ＝１、 ２、 ４ｍ (REFERENCE)STANDARD CABLE LENGTH 25 20 融着部 FLAT (75) 18 A Cable (20) 品 名 Ｐａｒｔ ｎａｍｅ ５７ＦＥ－３０５００－ｘｘｘ（Ｄ８）－３Ｆ ５７ＦＥ－３０３６０－ｘｘｘ（Ｄ８）－３Ｆ ５７ＦＥ－３０２４０－ｘｘｘ（Ｄ８）－３Ｆ ５７ＦＥ－３０１４０－ｘｘｘ（Ｄ８）－３Ｆ 注記 ＮＯＴＥＳ １．本図は、組立て後の形状を示します。 6 Ａ ７６．７４ ６１．６２ ４８．６４ ２頁参照 Ｂ Ｃ ７２．１ ７０．４ ５７．０ ５５．０ ４４．０ ３９．８ Ｓｅｅ ｐａｇｅ ２ Ｄ １３ １２ １０ 6.5 6.5 46 40 ５７Ｆ－XX 51.5 (20) Cable ５７Ｆ-１４ 45.5 (13) CABLE CONSTRUCTION 37.82 20 57FE-30xx0-2xN(D8)-3F 6 ３ Ｔｈｉｓ ｆｉｇｕｒｅ ｓｈｏｗｓ ｔｈｅ ｓｈａｐｅ ａｆｔｅｒ ｉｔ ａｓｓｅｍｂｌｅｓ ｔｈｅ ｐａｒｔｓ． (20) ２．１頁は、５７ＦＥ－３０５００－ｘｘｘ（Ｄ８）－３Ｆの形状を示します。 (20) ２頁は、５７ＦＥ－３０１４０－ｘｘｘ（Ｄ８）－３Ｆの形状を示します。 Ｔｈｉｓ ｆｉｇｕｒｅ ｏｆ ｐａｇｅ １ ｓｈｏｗｓ ｔｈｅ ｓｈａｐｅ ｏｆ ５７ＦＥ－３０５００－ｘｘｘ（Ｄ８）－３Ｆ． Contact No. 1 （Ｄ８）－３Ｆ． Contact Ｔｈｉｓ Ｆｉｇｕｒｅ ｏｆ ｐｅｇｅ ２ ｓｈｏｗｓ ｔｈｅ ｓｈａｐｅ ｏｆ ５７ＦＥ－３０１４０－ｘｘｘ No. 1 Contact No. 7 Contact No. n/2 1 n/2 n/2 +1 n Ｃｏｎｔｃｔ ｎｕｍｂｅｒ 7 8 14 Contact No. 8 Contact No. n Contact No. n/2+1 1 Contact No.14 ５７ＦＥ－３０ｘｘ０－ｘｘｘ（Ｄ８）－３Ｆ Ｋ－５０３０９２－１（１／３） Dimensions Part Number Number of Contact 57FE-30140-2xN(D8)-3F 14 57FE-30240-2xN(D8)-3F 24 57FE-30360-2xN(D8)-3F 36 57FE-30500-xxN(D8)-3F 50 A B C Figure referring（57FE-30140-2xN(D8)-3F） 48.64 39.8 10.0 61.62 55.0 12.0 76.74 70.4 13.0 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 5 ５７Ｆ Ｋ－５ 57FE Series Unit：mm ○ Panel Receptacle 57FE-40360- 20S Strain Relief No Digit： None S ： With Plastic Strain Relief Number of Contact：14，24, 36, 50 K ： With Metal Strain Relief (for 36,50 pin) Cover Style 0：Open-ended Cover, Blue A：Close-ended Cover, Blue(for 14,24 and 36 pin only) Contact Plating 2：Au0.4 μ m over Ni Plating Ｎｏ．n/2+1 Contact Ｎｏ．n Contact （Cover is temporary assembled when delivered） 18.6 11.5 12 15.1 ２－∅３.２±0.2 Hole 4 20.1 （Cover Assemble position） (23.2) （Temporary cover position） Ｎｏ．１ Contact Panel Thickness 1.5mm max. 2.159 Ｎｏ．n/2 Contact (7.5) A B C D E (1.27) A 44.0 （Cover is temporary assembled when delivered） B±0.1 +0.2 16.2 0 . Without Strain Relief with Strain Relief 36.00 23.7 25.6 36適合パネル穴参考寸法 59.74 52.0 （コネクタ前面取付タイプ） 53.9 36.8 適合パネル穴参考寸法 （コネクタ前面取付タイプ） 74.85 69.0 51.816 62.23 2-R 14 24 36.00 46.78 適合パネル穴参考寸法（コネクタ後面取付タイプ） 38.7 2-R 適合パネル穴参考寸法 適合パネル穴参考寸法 板厚＝１． ６０以下 Number of ６０以下 板厚＝１． B Contact G B 50 64.2 29.21 3.3±0.1 +0.2 ＊ 15.5 0 適合パネル穴参考寸法 適合パネル穴参考寸法 46.78 44.45 ４-Ｒ0.4 max. ４-Ｒ0.4 max. ＊：When the mating connector is 57FE-10 type, the size is 24 36.703 +0.2 0 +0.1 0 Hole +0.1 2-φ3.2 0 Hole 14 49.0 23.749 Panel Thickness：1.6mm max. B±0.1 +0.2 B±0.1 H 0 +0.2 H 0 2-φ3.2 Contact 59.74 G 4-R0.4 max. 4-R0.4 max. Number of 16.51 36.2 ● Rear Mounting Type 3.3±0.1 +0.2 (1.27) G 0 E 12.954 74.85 +0.2 15.5 0 B±0.1 25.4 82.85 67.74 Panel Thickness 1.5mm max. ● Front Mounting Type 36.00 46.78 4 ■ Panel Mounting Dimensions E 36 59.74 H 35.30 46.08 59.04 適合パネル穴参考寸法（コネクタ後面取付タイプ） 50 70.9 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 6 +0.2 16.2 0 50 D 54.78 11.5 (7.5) 36 20.1 （Cover Assemble position） (23.2) （Temporary cover position） 24 C 18.6 14 B +0.2 0 Contact 16.2 Number of 74.85 74.15 57FE Series Unit：mm ○ 90° Angled Bail Lock 57FE-40240- 20S (D20) Number of Contact：14，24, 36, 50 Deviation D20：90° angled Bail Lock Contact Plating 2：Au0.4 μ m over Ni Plating Strain Relief No Digit： No Strain Relief S ： With Plastic Strain Relief Cover Style 0：Open-ended Cover, Blue A：Close-ended Cover, Blue(for 14,24 and 36 pin only) K ： With Metal Strain Relief (36,50 pin) （Open-ended Cover, for 24 contacts only） 2 No.n contact side No.1 contact side (After assembled) 90° bail lock ■ Panel Mounting Dimensions ● Front Mounting Type ● Rear Mounting Type Panel Thickness：1.6mm max. B±0.1 B±0.1 ＊：When the mating connector is 57FE-10 type, the size is +0.2 16.2 0 . 適合パネル穴参考寸法 適合パネル穴参考寸法 14 24 36 50 with Strain Relief 36.00 23.7 25.6 14 53.9 36 59.74 74.85 52.0 69.0 +0.2 0 16.2 Number of Contact without Strain Relief 適合パネル穴参考寸法（コネクタ前面取付タイプ） 適合パネル穴参考寸法（コネクタ前面取付タイプ） 2-R 板厚＝１． ６０以下 板厚＝１． ６０以下 G 36.8 2-R 適合パネル穴参考寸法 適合パネル穴参考寸法 B 46.78 +0.2 0 3.3±0.1 3.3±0.1 15.5 ＊ 15.5 0 +0.1 +0.1 0 Hole 2-φ3.22-φ3.2 0 Hole Number of Contact H ４-Ｒ0.4 max. max. ４-Ｒ0.4 +0.2 0 +0.2 4-R0.44-R0.4 max. max. +0.2 0 38.7 24 70.9 50 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 7 B 36.00 H 35.30 適合パネル穴参考寸法 （コネクタ後面取付タイプ） 適合パネル穴参考寸法 （コネクタ後面取付タイプ） 46.78 46.08 74.85 74.15 59.74 59.04 16.2 H +0.2 0 B±0.1 B±0.1 +0.2 G 0 G+0.2 0 57FE Series Unit：mm ○ Straight Metal Hood 57F-14H - 3R Number of Contact：14，24, 36, 50 3R： Trivalent Chromium Free H： Straight Hood B C Number of A B C D 14 40.0 33.20 30.0 8.5 24 45.5 44.00 39.8 10.0 36 45.5 57.00 55.0 12.0 50 45.5 72.10 70.9 13.0 20 Contact A φD ○ Straight Plastic Hood with Lock Screw 57FE-24H - C F Number of Contact：24, 36, 50 CF： Cadmium Free H： Straight Hood Number of B Contact 19 C C D 41 53.0 46.78 10 36 44 68.0 59.74 12 50 44 83.0 74.85 13 A M3.5×0.6 Thread ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 8 B 24 φD http://www.ddknet.co.jp A 57FE Series Unit：mm 9 ○ Right Angle Hood 5.3 G 5 7 F-50L H-3R 15 57F-XX 20 f o r 50 Contacts max. φ13 Open-ended Cover 72.1 52.2 9 3.5 G 5.3 9 G 57F-50 15 57F-XX Close-ended Cover Op ○ Strain Relief 9 Metal Strai Relief H 36 9.1 Contact 50 68.7 51.7 7.0 ５７Ｆ－ＸＸ ５７Ｆ－ＸＸ Clo 5.0 ・Material/Finish・・Stainless Steel/ Passivation 8.4 Number of Contact：36, 50 G 3.5 J Number of 7.0 H 10.0 5 7 F-50-042 Plastic Strain Relief ・Material / Finish : Polycarbonate Resin （UL94V-0）/ Blue H Contact H 25.1 24 38.2 36 53.4 50 70.4 9.1 14 ５７Ｆ－ＸＸ ○ Assembly Tools ● Cable Cutting Tool：357J-4256 Press Tool：357J-4674D Attachment 357J-4668 10.0 ５７Ｆ－xx 7.0 9.1 A● ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. http://www.ddknet.co.jp 9 .1 A 7.0 Number of Contact：14，24, 36, 50 Number of 10.0 5 7 F-50-041 ５