FSMA 906 Connector 906D Series OUTLINE 906D series is a optical connector with threaded locking for fine optical cable. Adaptor and receptacle are commonly used with 905D series. FEATURE ・ Applicable cable is GI 50/125 and 100/140 multimode fiber. ・ Termination of the code is available in crimp type and adhesive type. ・ Threded locking with hexagonal nut APPLICATION Short range communication for FA, OA CONFORMING STANDARD IEC 61754-20(F-SMA) SPECIFICATIONS Insertion Loss Operating Temperature Durability 110530 RoHS Compliant Compliant Fiber Type GI 50/125, GI 100/140 PC Polish 1.5dB max. -25℃〜 70℃ 500 Cycles ◎ Specifications and/or dimensions in this catalogue are subject to change without notice. Your catalogue checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp φ3.1 6.2 906D Series Unit：mm φ3.1 ○ FSMA Plug 3.1 φ3.1 9.81 max. After polishing 1/4-36UNS 6.2 8.0 φ3.1 φ2.16 Sleeve for Adaptor φ3.06 Hex Dia. 3.1 (34.6) Sleeve for Receptacle Part Number Ferule Bore Fiber Dia. Core Dia. Sheath Dia. 1/4-36UNS 906D-110-5917-01-CF 0.126+0.003 0.125mm L（m） 0.90mm 2.8mm±0.38.0 906D-110-5918-01-CF 0.142+0.003 0.140mm 0.90mm 2.8mm±0.3 906D-110-5919-01-CF 0.230+0.003 L（m） 0.230mm 0.90mm 2.8mm±0.3 0 0 0 Hex Dia. (34.6) ● Dust cap is same as 905D series. Plug Sleeve for Adaptor ● Sleeve for adaptor is utilized for connection of two plugs by the adaptor(P/N:905D-120-5000). Plug Sleeve for Adaptor ● Sleeve for receptacle is utilized for connection of receptacle(905D) and plug. Sleeve for Receptacle Sleeve for Receptacle ※ Sleeves for adaptor and receptacle are attached with plug connector. ○ Adaptor / Receptacle Adaptors and receptacles are commonly used for 905D and 906D series. Please refer to 905D series catalogue. ◎ Specifications and/or dimensions in this catalogue are subject to change without notice. Your catalogue checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 9.81 max. After polishing 906D Series Unit：mm ○ Patch Code （with Dust Ca p ） L（m） FOJ-906M3-B-( )-CF Length（m） Plug Sleeve for Adaptor A：Single-ended B：Both-ended Fiber Type M3：GI 50/125・φ 2.8 C3：GI 100/140・φ 2.8 Sleeve for Receptacle ◎ Specifications and/or dimensions in this catalogue are subject to change without notice. Your catalogue checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3