AGDE-G10 Premium Digital Audio Processing Module

AGDE-G10 Premium Digital Audio Processing Module
AGDE-G10 Overview
The AGDE-G10 is the first in Altonics’ newest line of quality, high performance multi effects processors.
Although many users of the AGDE-G10 will be looking for a solution for high end multi-effectors or guitar &
bass related sound processing, the wide range of effects provided by the AGDE-G10 is suitable for various
applications including mixers, karaoke amplifiers and other sound enhancement products.
Instilled with Altonics’ 15 years of know-how in digital sound processing, the AGDE-G10 provides the best
audio quality and performance possible for whichever application you choose. With the Altonics name behind
it, you know you can trust the quality of this audio signal processor.
The AGDE-G10 is an all in one effects solution. It supports filters that can be used for such as EQ, spatial
effects such as echo and reverb, the whole range of modulation effects including chorus, flanger, phaser,
auto-wah, volume-wah, pedal-wah, tremolo, auto pan and more. It also encompasses dynamics processing
with a noise gate, compressor, and limiter. Fuzz, overdrive, and distortion are all provided in their full
crunchiness while still maintaining crisp clear digital sound. Add a built-in chromatic tuner and real time 32 bit
digital processing, and you won’t need to look any further for all your sound enhancement needs.
In the following pages you will find our reference design implementing AGDE-G10’s functions to the fullest.
Just pick the functions you want and match them with your custom control and display.
AGDE-G10 Features
-
Premium effects solution for guitar/bass amplifiers, multi-effectors, mixers and more.
-
Accurate simulation of the hottest effectors, amplifiers and signature sounds from top musicians.
-
32-bit full digital processing, 24-bit AD/DA conversion, and sampling rates of up to 96 kHz.
-
Functions extendable using external UART interface.
-
RoHS (PB-free)
AGDE-G10 Specification
-
Analog Audio Input/Output : 2-in 2-out (Mono or Stereo)
-
Audio Input/Output Impedance : 100kΩ / 470Ω?
-
Maximum Input/Output Level : 0dBu = 2.8 Vpp?
-
Nominal Level : 0dBu
-
DSP arithmetic: 28 x 30-bit
-
AD/DA converter : 24-bit / up to 96kHz
-
S/N Ratio : >100dB?
-
THD +N 0.015% @ 1kHz 0dB?
-
Frequency Response : 20Hz - 20kHz +/- 0.5 dB?
-
Power Consumption : 300 mA
Copyright 2009 Altonics
p 1/12
AGDE-G10 Premium Digital Audio Processing Module
AGDE-G10 Module Dimension
Copyright 2009 Altonics
p 2/12
AGDE-G10 Premium Digital Audio Processing Module
AGDE-G10 Module Pin Connection
J1
1
ADC0
Analog input for potentiometer / General-purpose I/O
2
ADC1
Analog input for potentiometer / General-purpose I/O
3
ADC2
Analog input for potentiometer / General-purpose I/O
4
ADC3
Analog input for potentiometer / General-purpose I/O
5
ADC4
Analog input for potentiometer / General-purpose I/O
6
ADC5
Analog input for potentiometer / General-purpose I/O
7
ADC6
Analog input for potentiometer / General-purpose I/O
8
ADC7
Analog input for potentiometer / General-purpose I/O
9
GPIO0
General-purpose I/O
10
GPIO1
General-purpose I/O
11
GPIO2
General-purpose I/O
12
GPIO3
General-purpose I/O
13
GPIO4
General-purpose I/O
14
GPIO5
General-purpose I/O
15
GPIO6
General-purpose I/O
16
GPIO7
General-purpose I/O
17
DGND
Digital ground
18
DGND
Digital ground
19
DC+3.3V OUT
Voltage supply for external controllers
20
DC+3.3V OUT
Voltage supply for external controllers
J2
1
LOUT
Analog audio signal left output
2
ROUT
Analog audio signal right output
3
AGND
Analog ground
4
LIN
Analog audio signal left input
5
RIN
Analog audio signal right input
6
AGND
Analog ground
7
DGND
Digital ground
8
RxD
UART Rx
9
TxD
UART Tx
10
DGND
11
DC+5V IN
DC power in +5V
12
DC+5V IN
DC power in +5V
Digital ground
Copyright 2009 Altonics
p 3/12
AGDE-G10 Premium Digital Audio Processing Module
AGDE-G10 Effect Block Diagram
* Above audio flow chart can be customized.
Copyright 2009 Altonics
p 4/12
AGDE-G10 Premium Digital Audio Processing Module
AGDE-G10 Drive & Sound Models
1
JC Clean
Based on Roland JC-120 Jazz Chorus Amp
2
TSC
Modeled from Ibanez TS808
3
DIST
Modeled from Boss DS-1
4
METAL
Modeled from Boss MT-2
5
FF
Modeled from Dallas-Arbiter Fuzz Face
…
…
…
* Above list is prone to updates without prior notice in an ongoing effort to provide more sounds for users.
Copyright 2009 Altonics
p 5/12
AGDE-G10 Premium Digital Audio Processing Module
AGDE-G10 UART Control Registers
*to be added.
Copyright 2009 Altonics
p 6/12
AGDE-G10 Premium Digital Audio Processing Module
AGDE-G10 Application #1 : Guitar/Bass Amp Head
Copyright 2009 Altonics
p 7/12
AGDE-G10 Premium Digital Audio Processing Module
Copyright 2009 Altonics
p 8/12
AGDE-G10 Premium Digital Audio Processing Module
Copyright 2009 Altonics
p 9/12
AGDE-G10 Premium Digital Audio Processing Module
Copyright 2009 Altonics
p 10/12
AGDE-G10 Premium Digital Audio Processing Module
Copyright 2009 Altonics
p 11/12
AGDE-G10 Premium Digital Audio Processing Module
AGDE-G10 Ordering Information & Contact Point
Visit us at our website for more products and more information!
Website: http://www.altonics.com
E-mail: kalicrys@altonics.com
Address:
Suite 409, Woori Venture Town II
82-29, Mullae-3-ga, Yeongdeungpo-gu
Seoul, Republic of Korea (150-700)
TEL: +82-2-2601-1466
FAX: +82-2-2601-1468
AGDE-G10 Datasheet Revision History
v 0.8
16 Sep 2009
Preliminary draft.
Copyright 2009 Altonics
p 12/12