30478_LTSR_2014_Final.qxp_LTSR_2014.QXD 2014-06-10 5:48 PM Page 4 Material: • Body: Polyamide 6 • Seal: Neoprene Technical properties: • Maximum strain relief through clamping range • IP68 achieved without seal rings (PG and metric only)¹ • Trapezoidal thread with high torque guarantees tight and permanent fit of the dome nut • Gas tight and watertight Applications: Machines and devices Locknut Pressure Dome External Thread Pressure Fingers (sold separately, pg 24) Thread for Sealing Pressure Dome Sleeve PG Thread NPT 3/8" NPT 3/8" NPT 1/2" NPT 1/2" NPT 3/4" NPT 3/4" NPT 1" NPT 1" M 12 x 1.5 M 12 x 1.5 M 16 x 1.5/9 M 16 x 1.5/11 M 16 x 1.5/9 M 16 x 1.5/11 M 20 x 1.5/13 M 20 x 1.5/16 M 20 x 1.5/13 M 20 x 1.5/16 M 25 x 1.5/16 M 25 x 1.5/21 M 25 x 1.5/16 M 25 x 1.5/21 M 32 x 1.5 M 32 x 1.5 M 40 x 1.5 M 40 x 1.5 M 50 x 1.5 M 50 x 1.5 M 63 x 1.5 M 63 x 1.5 1.5-5 2.5-6.5 1.5-6 2.5-8 2-7 3.5-10 3-9 5-12 5-12 7-14 7-16 9-18 11-21 14-25 13-26 18-32 17-31 24-38.5 26-39 35-48 1.5-6 2.5-8 3-9 5-12 7-16 9-18 11-21 14-25 1.5-5 2.5-6.5 1.5-6 2-7 2.5-8 3.5-10 3-9 5-12 5-12 7-14 5-12 7-16 7-14 9-18 11-21 14-25 13-26 18-32 17-31 24-38.5 26-39 35-48 Cat. No. Light Grey Cat. No. Black 5309 107 5308 707 5309 109 5308 709 5309 111 5308 711 5309 113 5308 713 5309 116 5308 716 5309 121 5308 721 5309 129 5308 729 5309 136 5308 736 5309 142 5308 737 5309 148 5308 738 5309 207 5308 507 5309 209 5308 509 5309 211 5308 511 5309 213 5308 513 5309 216 5308 516 5309 221 5308 521 5309 229 5308 529 5309 236 5308 536 5309 242 5308 537 5309 248 5308 538 NPT Thread 5308 5308 5308 5308 5308 5308 5308 5308 904 900 905 901 906 902 907 903 5308 5308 5308 5308 5308 5308 5308 5308 924 920 925 921 926 922 927 923 Metric Thread* 5309 612 5308 950 5309 615 5309 616 5308 958 5308 951 5309 619 5309 620 5308 959 5308 952 5309 624 5309 625 5308 960 5308 953 5309 632 5308 954 5309 640 5308 955 5309 650 5308 956 5309 663 5308 957 5309 712 5308 940 5309 715 5309 716 5308 948 5308 941 5309 719 5309 720 5308 949 5308 942 5309 724 5309 725 5308 962 5308 943 5309 732 5308 944 5309 740 5308 945 5309 750 5308 946 5309 763 5308 947 Std. Pk. 100 100 50 50 50 50 50 50 50 50 25 25 20 20 10 10 5 5 5 5 50 50 50 50 20 20 20 20 100 100 50 50 50 50 50 50 50 50 50 25 50 25 20 20 10 10 5 5 5 5 US E184471 Temperature Range -25 to 100°C (-13 to 212°F) Thread Size PG7 PG9 PG11 PG13.5 PG16 PG21 PG29 PG36 PG42 PG48 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 M12x1.5 M16x1.5/9 M16x1.5/11 M20x1.5/13 M20x1.5/16 M25x1.5/16 M25x1.5/21 M32x1.5 M40x1.5 M50x1.5 M63x1.5 * Extended thread available consult Altech. ¹ Seal rings for NPT sold separately, see page 35. 4 C Metric Only H mm 15 19 22 24 27 33 42 53 60 70 E mm 8 8 8 9 10 11 11 13 13 14 15 19 22 24 27 27 33 42 53 60 70 8 10 10 10 10 10 10 10 10 12 12 19 24 33 42 11 14 15 18 Dimensions L ØC mm mm 32 6.7 35 8.5 37 10.5 39 12.5 43 14.5 50 18.5 53 25.5 65 32.5 68 39.0 70 48.5 38 44 54 60 32 37 39 40 43 45 49 52 62 67 68 8.5 12.5 18.5 25.5 6.7 8.5 10.5 12.5 14.5 14.5 18.5 25.5 32.5 39.0 48.5 Insert Neoprene ØThread mm 12.5 15.2 18.6 20.4 22.5 28.3 37.0 47.0 54.0 59.3 6.8 8.5 10.5 12.5 14.5 14.5 18.5 25.5 32.5 39.0 48.5 12.0 16.0 16.0 20.0 20.0 25.0 25.0 32.0 40.0 50.0 63.0 8.7 12.5 18.5 25.5 17.1 21.2 26.7 33.3 Dome Nut PA 6 Body PA 6 H ØP mm 6.8 8.7 10.5 12.5 14.5 18.5 25.5 32.5 39.0 48.5 C PG 7 PG 7 PG 9 PG 9 PG 11 PG 11 PG 13.5 PG 13.5 PG 16 PG 16 PG 21 PG 21 PG 29 PG 29 PG 36 PG 36 PG 42 PG 42 PG 48 PG 48 Clamping range mm Thread P Outer thread E L This is one of our most popular series and is usually kept in stock. Locknuts sold separately, see page 24. Altech Corp.® l 35 Royal Road l Flemington, NJ 08822-6000 l Phone (908)806-9400 l FAX (908)806-9490 l www.altechcorp.com 30478_LTSR_2014_Final.qxp_LTSR_2014.QXD 2014-06-10 5:48 PM Page 5 Material: • Body: Nickel-plated brass • Seal: Neoprene • Clamping insert: Polyamide 6 • Sealing ring for outer thread: Nitril Technical properties: • Seal rings included for PG and Metric sizes • Maximum strain relief through clamp range • Gas tight and watertight PG Thread* Outer thread PG 7 PG 7 PG 9 PG 9 PG 11 PG 11 PG 13.5 PG 13.5 PG 16 PG 16 PG 21 PG 21 PG 29 PG 29 PG 36 PG 36 PG 42 PG 42 PG 48 PG 48 Clamping range mm 1.5-5 2.5-6.5 2.5-7 4-9.5 3-8.5 6-11.5 4-10 7-13 5-12 8-15 8-16 11-19 11-21 16-26 16-28 22-34.5 22-34 27-40 28-40 35-48 2.5-7 4-9.5 4-10 7-13 5-13 8-16 7-17 11-21 M M M M M M M M M M M M M M M M 1.5-5 2.5-6.5 2.5-7 4-9.5 4-10 7-13 5-13 8-16 7-17 11-21 10-22 15-27 17-29 22-35 28-40 35-48 x x x x x x x x x x x x x x x x 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 4220351 4220307 4220352 4220309 4220353 4220311 4220354 4220313 4220355 4220316 4220356 4220321 4220357 4220329 4220358 4220336 4220359 4220342 4220360 4220348 NPT Thread NPT 3/8" NPT 3/8" NPT 1/2" NPT 1/2" NPT 3/4" NPT 3/4" NPT 1" NPT 1" 12 12 16 16 20 20 25 25 32 32 40 40 50 50 63 63 Cat. No. 4220810 4220800 4220811 4220801 4220812 4220802 4220813 4220803 Metric Thread* 4220712 4220612 4220716 4220616 4220720 4220620 4220725 4220625 4220732 4220632 4220740 4220640 4220750 4220650 4220763 4220663 * Extended thread available consult Altech Std. Pk. 50 50 50 50 50 50 50 50 50 50 20 20 20 20 10 10 5 5 5 5 50 50 50 50 20 20 5 5 100 100 50 50 50 50 25 25 20 20 10 10 5 5 5 5 Temperature Range -25 to 100°C (-13 to 212°F) Thread H Size mm PG7 14 PG9 17 PG11 20 PG13.5 22 PG16 24 PG21 30 PG29 40 PG36 50 PG42 58 PG48 65 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 M12x1.5 M16x1.5 M20x1.5 M25x1.5 M32x1.5 M40x1.5 M50x1.5 M63x1.5 18 23 28 36 E mm 5 6 6 6.5 6.5 7 8 9 10 10 15 20 20 25 14 17 22 27 34 42 55 65 Dimensions L ØC mm mm 25 6 29 9.7 30 11.7 32.5 13.2 34 15.2 35 19.5 38 26 42 34.5 47 40.5 54 48.5 38 46 48 55 5 5 6 7 8 8 9 10 25 28 32 35 38 41 46 54 Clamping Insert PA6 Body BN Ø H 9.7 13.2 16.2 21.5 6.6 9.7 13.2 16.2 21.5 27.5 35.5 48.5 ØP ØThread mm mm 6.6 12.5 10 15.2 12 18.6 13.5 20.4 15.5 22.5 19.5 28.3 26.5 37 35 47 41 54 50 59.3 10 13.5 16.5 22 17.1 21.2 26.7 33.3 6.6 10 13.5 16.5 22 28 36 50 12 16 20 25 32 40 50 63 Sealing Sleeve Neoprene Dome Nut BN ØP ØC E L This is one of our most popular series and is usually kept in stock. Locknuts sold separately, see page 25. Altech Corp.® l 35 Royal Road l Flemington, NJ 08822-6000 l Phone (908)806-9400 l FAX (908)806-9490 l www.altechcorp.com 5 30478_LTSR_2014_Final.qxp_LTSR_2014.QXD 2014-06-10 5:48 PM Page 6 Material: • Body: Stainless Steel 1.4404 / INOX 316L • Seal: Neoprene • Clamping insert: Polyamide 6 • Sealing ring for outer thread: Nitril Technical properties: • Seal rings included • Maximum strain relief through clamp range • Gas tight- and watertight M M M M M M M M M M M M M M M M 12 12 16 16 20 20 25 25 32 32 40 40 50 50 63 63 x x x x x x x x x x x x x x x x 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Metric Thread 1.5-5 4.5-6.5 2.5-7 5-9.5 4-10 8-13 5-13 9-16 7-17 12-21 10-22 16-27 17-29 23-35 28-40 36-48 4220860 4220850 4220861 4220851 4220862 4220852 4220863 4220853 4220864 4220854 4220865 4220855 4220866 4220856 4220867 4220857 100 100 50 50 50 50 25 25 20 20 10 10 5 5 5 5 Temperature Range -25 to 100°C (-13 to 212°F) Thread H Size mm M12x1.5 14 M16x1.5 17 M20x1.5 22 M25x1.5 27 M32x1.5 34 M40x1.5 42 M50x1.5 55 M63x1.5 65 E mm 5 5 6 7 8 8 9 10 Dimensions L ØC mm mm 25 6.6 28 9.7 32 13.2 35 16.2 38 21.5 41 27.5 46 35.5 54 48.5 Clamping Insert PA6 Body SS Ø H ØP ØThread mm mm 6.6 12 10 16 13.5 20 16.5 25 22 32 28 40 36 50 50 63 Sealing Sleeve Neoprene Dome Nut SS ØP ØC E L Locknuts sold separately, see page 24. 6 Altech Corp.® l 35 Royal Road l Flemington, NJ 08822-6000 l Phone (908)806-9400 l FAX (908)806-9490 l www.altechcorp.com 30478_LTSR_2014_Final.qxp_LTSR_2014.QXD 2014-06-10 5:48 PM Page 7 Flat Head Sealing Material: • EPDM, black Features: • For sealing cable gland entries when cables are not being installed. • Insert into cable gland and tighten gland to seal. ØA mm 11.0 15.0 18.0 8.0 12.0 15.0 C mm 17.0 18.0 19.0 L mm 20.0 21.0 22.0 Cat. No. 7217701 7217702 7217703 Std. Pk. 100 100 100 Temperature Range -40 to 130°C (-40 to 266°F) ØB PG 9, PG 11, M 16, NPT 3/8 PG 13.5, PG 16, M 20, NPT 1/2 PG 21, M 25, NPT 3/4 ØB mm ØA Suitable for C L Multi-Conductor Sealing Material: • Neoprene, black Features: • Standard Straight-Through Polyamide Series • Delivered separate, replaces sealing sleeve provided with gland Suitable for Hole Quantity Hole Ø mm ØA mm B mm Cat. No. Std. Pk. Multi-Conductor Seal PG 11/ M 16 2 PG 16/ M 20 2 PG 16/ M 20 2 PG 16/ M 20 4 PG 21/ M 25 2 PG 21/ M 25 2 PG 21/ M 25 3 PG 21/ M 25 4 PG 21/ M 25 6 PG 29/ M 32 4 PG 29/ M 32 4 PG 29/ M 32 6 PG 29/ M 32 8 4.0 5.0 6.0 5.0 6.0 8.0 7.0 6.5 4.0 6.0 8.0 6.0 4.0 13.0 17.0 17.0 17.0 22.5 22.5 22.5 22.5 22.5 30.5 30.5 30.5 30.5 8.0 10.0 10.0 10.0 11.5 11.5 11.5 11.5 11.5 13.0 13.0 13.0 13.0 8114200 8114203 8114201 8114202 8114204 8114208 8114205 8114206 8114207 8114212 8114209 8114210 8114211 100 100 100 100 100 100 100 100 100 100 100 100 100 Solid Sealing without holes PG 11/ M 16 – PG 16/ M 20 – PG 21/ M 25 – PG 29/ M 32 – – – – – 13.0 17.0 22.5 30.5 8.0 10.0 11.5 13.0 8114250 8114251 8114252 8114253 100 100 100 100 Temperature Range -25 to 100°C (-13 to 212°F) B A This is one of our most popular series and is usually kept in stock. Altech Corp.® l 35 Royal Road l Flemington, NJ 08822-6000 l Phone (908)806-9400 l FAX (908)806-9490 l www.altechcorp.com 7