Unibody LED Indicator Plastic Pilot Lights Specifications A. Mechanical Characteristics Applicable Standard UL508 IEC 60947 CSA 22.2 IP65 as per IEC 60947, Nema Type 4X, 12 as per UL50 -25° to +70°C (-13 to +158°F) Phosphor bronze for LED, PCB contact brass (tin plated) All metallic parts are electroplated for corrosion protection 0.5 Nm (4.5 lbs. / in.) More than 100° More than 100 mcd for all colors Degree of Protection Temperature Range Contact material Corrosion protection Terminal Torque Viewing Angle Optical Axial intensity B. Electrical Characteristics Rating Terminal Capacity Rated 6V AC/DC to 240V AC and 220V DC, 2W max. (Integral LEDs) Screw connection 2 X 1.5mm2 1 X 0.5mm2 (min) 1 X 2.5mm2 (max) 2.5KV 500M ohm at 1000VDC Polarity protection is only in case of DC supply lamps 20V for 110V AC & 110V DC 40V for 240V AC & 220V DC (i.e. approx. 20% of Rated Voltage) Max. 20mA for AC circuits Max. 15mA for DC circuits Dielectric Test Rated insulation Resistance Polarity protection Low voltage protection Current Consumption Dimensional Drawings All dimensions shown in millimeters. To convert to inches multiply by 0.03937 ckt 58.0 Ø29.8 15.0 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 29