PCB Mounting Tracks Narrow Mounting Track Extrusion and Components Mount standard or custom printed circuit boards in Mounting Tracks which can be conveniently DIN rail or panel mounted in your control panel or cabinet. These are the same tracks used for Altech interface modules. We now make them available to you to house and protect your custom boards, etc. Tracks are easily cut to size or can be ordered precut to specific lengths. They are easily assembled from standard components and snap onto 35mm DIN rail or can be panel mounted. For PC Board Widths 73mm (2.9 in.) W EPS L Each track has two sets of printed circuit board guides to accept two alternate board widths. End Sections hold printed circuit boards securely in place and keep out foreign objects. EPDR1 MTGF1 Panel Mount MOUNTING When mounting extrusions on DIN rail, order two or more DIN Rail mounting feet. These feet slide into grooves on the extrusion. Then attach two DIN Rail Mount End Sections with help of EPS screws. Cat. No. To panel mount, order two Panel Mount End Sections (and EPS screws), each with an integral mounting flange with a 6 x 8mm (.24 x .32 in.) hole slot. Mounting Track 1 meter, grey 2 meter, grey 1 meter, green* 2 meter, green* If desired, tracks can be direct mounted using double sided tape. Order two DIN rail mount end sections (and EPS screws). Accessories • Standard Lengths: 1m (3'-3") or 2m (6'-6") • Track Material: PVC • Temperature Limit: Short Term - 80˚C (176˚F) Continuous - 70˚C (158˚F) • End Section, Foot Material: Polyamide • Preassembled, Precut Lengths Available • Tracks Accept Standard MT2 Marking Tags MTGTK1 MTGTK1/1M MTGTK1 MTGTK1/1M/G MTGTK1/G DIN Rail Mount Std. Pk. 5 5 5 5 DIN Rail Mount End Section, grey DIN Rail Mount End Section, green* EPDR1 EPDR1/G 100 100 DIN Rail Mounting Foot, grey DIN Rail Mounting Foot, green* MTGF1 MTGF1/G 100 100 Panel Mount End Section, grey Panel Mount End Section, green* EPDP1 EPDP1/G 100 100 DIN Rail / Panel Mount End Section Screws #4x1/2”, Phillips Pan head (2 required per end section) EPS 200 Marking Tags MT2 100 DIN Rail Mounting Kit (2x EPDR, 2x MTGF, 4x EPS) 1.100 1 Sizing Information Printed Circuit Board Width Track Type * Green color available on request. Contact Altech for more information. 86 MTGTK1 MTGTK2 High Guide (HG) 73 ± 1mm (2.9 ± 0.05 in.) 110 ± 1mm (4.3 ± 0.05 in.) Mounting Track Extrusion "Cut-to-Size" Formula Extrusion Length = Printed Circuit Board Length – 4.5mm (.175 in.) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com PCB Mounting Tracks Wide Mounting Track Extrusion and Components Narrow Mounting Track For PC Board Widths 110mm (4.9 in.) W MTGTK2 73 2 16 EPS L 11.4 69 84 PCB MOUNTINGTRACK (73 mm) MTGF1 15 EPDP2 DIN Rail Mount 15 35 82 DIN RAIL MOUNTING FOOT (73mm) Wide Mounting Track Panel Mount Cat. No. 110 Std. Pk. 5 5 5 5 11.4 MTGTK2/1M MTGTK2 MTGTK2/1M/G MTGTK2/G 16 2 119 EPDR2 EPDR2/G 100 100 MTGF2 MTGF2/G 100 100 EPDP2 EPDP2/G 100 100 EPS 200 MT2 100 15 PCB MOUNTINGTRACK (110 mm) 15 35 117 DIN RAIL MOUNTING FOOT (110mm) aAlso applies for DIN Rail Mount Unit Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 87