DRAN120 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧PFC FUNCTION AVAILABLE ‧PARALLEL FUNCTION AVAILABLE (SWITCH) ‧INPUT VOLTAGE 115/230VAC AUTO SELECT ‧SELV COMPONENTS DESIGN ‧3 YEARS WARRANTY R R R HH H UL 1310 Class I, Div 2 EN 61558-1 EN 61558-2-16 UL 60950-1 IND. CONT. EQ. UL 508 a EN 60950-1 SELECTION CHART DRAN 120 - 24 x Wattage A : SCREW TERMINAL TYPE B : DETACHABLE CONNECTOR TYPE AL / BL : CLASS 2 POWER (24V ONLY) 12 : 12V OUT 24 : 24V OUT 48 : 48V OUT MODEL LIST MODEL NO. INPUT VOLTAGE DRAN120-12x 115 / 230 VAC 120 WATTS + 12 VDC DRAN120-24x 115 / 230 VAC 120 WATTS DRAN120-24xL 115 / 230 VAC 91 WATTS DRAN120-48x 115 / 230 VAC 120 WATTS OUTPUT OUTPUT WATTAGE VOLTAGE Single Output Models SPECIFICATION OUTPUT CURRENT EFF. (min.) EFF. (typ.) 10A 82% 84% + 24 VDC 5A 84% 86% + 24 VDC 3.8A 83% 85% + 48 VDC 2.5A 85% 87% max. unit o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Switching frequency Isolation voltage min. Conditions Vi nom, Io nom Input-Output 3,000 / 4,242 KHz VAC / VDC Input-FG 1,500 / 2,121 VAC / VDC 500 / 710 VAC / VDC 55 Output-FG Isolation resistance Ambient temperature Derating (see derating curve) Storage temperature Relative humidity Input-Output, @ 500VDC Operating at Vi nom -40 + 85 Vi nom, Io nom 20 95 Vi nom, Io min Bellcore Issue 6 @40 oC, GB Cooling Installation position Pollution degree www.chinfa.com 2014.09.09 MΩ + 71 -35 Vi nom, from +61 to +71 C Non operational MTBF Dimension 100 o Temperature coefficient Altitude during operation typ. 2.5 ± 0.03 o C % / oC o C % RH % / oC 12V 509,000 Hours 24V AL / BL 530,000 Hours 659,000 Hours 48V 600,000 EN 60950-1 Screw terminal type Detachable connector type 5,000 Hours m L124.5 x W64 x D123.6 mm L143.5 x W64 x D123.6 mm Free air convection Vertical ( other direction may derating using ) 2 [email protected] P1 DRAN120 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Conditions Rated input voltage Io nom Absolute input max. range Ta min ... Ta max, Io nom min. typ. 90 132 AC in 230V selected 180 264 VAC 210 375 VDC Vi : 115 / 230 VAC, Io nom 2.2 / 0.83 1.65 / 0.65 Rated input current AL, BL models Vi : 90 / 180 VAC, Io nom Line frequency AL, BL models Vi nom, Io nom VAC A A 2.8 / 1.4 47 Vi : 115 / 230 VAC , Io nom Vi : 230 VAC, Io nom A 2.0 / 0.8 A 63 24 / 48 Hz A 12V 24 W 24V AL / BL 20 W 16 W 48V 19 Input-Output Input-FG Power factor (Passive) VAC 115V selected Input current Leakage current unit AC in DC in Inrush current Power dissipation max. 115 / 230 (auto select) Vi : 230VAC, Io nom 0.25 W mA 3.5 mA max. unit +1 % 0.7 OUTPUT SPECIFICATIONS Characteristics min. Conditions Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max Vi nom, Io min ...Io nom 0 Load regulation Voltage trim range single mode parallel mode Vi nom, 0.8 Io nom 24V AL / BL 22.5 28.5 VDC 22.5 24.5 VDC 45 Vi nom, Io nom 2.5 A @ 48Vdc / 2.1 A @ 55 Vdc ms 25 / 30 12V model : with 7000μF CAP Vi nom, Io nom Vi nom, Io nom VDC 3.8 A @ 24Vdc / 3.7 A @ 24.5 Vdc 24V, 48V models : with 3500μF CAP Rise time 55 10 A @ 12Vdc / 8.2 A @ 14.5 Vdc 5 A @ 24Vdc / 4.2 A @ 28.5 Vdc 48V Vi nom, Io nom % VDC 24V AL / BL Turn on time % 14.5 12V Vi : 115 / 230 VAC , Io nom % ±1 ±5 11.4 Vi nom Hold up time % ± 0.5 12V 48V Rated continuous loading typ. 12V model : with 7000μF CAP 24V, 48V models : with 3500μF CAP 1,000 ms 1,500 ms 150 ms 500 ms 150 ms Fall time Transient recovery time Vi nom, Io nom Vi nom, 1~0.5 Io nom 2 ms Ripple & noise Vi nom, Io nom, BW = 20MHz 50 mV Power back immunity Vi nom, Io nom 12V 18 VDC 24V 35 VDC 48V 63 Capacitor load Vi nom, Io nom 12V DC ON indicator threshold at start up (Green LED) Vi nom, Io nom 24V, 48V 12V DC LOW indicator threshold after start up (Red LED) Vi nom, Io nom 24V 48V Parallel operation Efficiency www.chinfa.com 2014.09.09 12V 24V 48V 0.1 Io min ~ 0.9 Io max (Except AL / BL models) Vi nom, Io nom, Po / Pi 7,000 VDC μF 3,500 μF 10 17.6 37 11.2 19.4 43 VDC VDC VDC 10 17.6 37 11.2 19.4 43 VDC VDC VDC 3 unit Up to 87%, See model list and typ efficiency curve [email protected] P2 DRAN120 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed CONTROL AND PROTECTION Characteristics typ. min. Conditions Input fuse max. unit T3.15A / 250VAC internal Internal surge voltage protection Varistor IEC 61000-4-5 Vi nom (see typ current limited curve) Rated over load protection AL / BL Threshold voltage of contact closed (at start up) Power Rdy (for 24V model only) 145 % 102 108 % 17.6 19.4 VDC 500 Electrical isolation Contact rating at 60VDC Over voltage protection 110 Vi nom, 0.8 Io nom (Auto Recovery) VDC 0.3 A 12V 15 16.8 V 24V 30 33 V 48V AL / BL 60 66 V 24.5 25.5 V Output short circuit Fold forward Degree of protection IP20 APPROVALS AND STANDARDS UL / cUL UL 508 Listed UL 60950-1, UL 1310 Class 2 Power (24AL/BL models only) Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) TUV EN 60950-1 EN 61558-1, EN 61558-2-16 (meet EN 60204-1) CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2 Class D, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 CCC GB4943.1, GB9254, GB17625.1 Vibration resistance meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size Screw terminal type Detachable connector type Case material Weight Metal 920g 1.02kg ; 20 Packing 124.5 x 64 x 123.6 mm (4.9 x 2.52 x 4.87 inches) 143.5 x 64 x 123.6 mm (5.65 x 2.52 x 4.87 inches) / 21.5kg / 2.01CUFT MECHANISM & PIN CONFIGURATION mm [inch] 64.00 [2.52] 64.00 [2.52] 6 6 firmly on the rail. 1 Vout ADJ. DC LO DC ON P INSTALLATION - - ++ Rdy DRAN120 L Vout ADJ. DC LO DC ON 124.50 [4.90] S - - ++ Rdy 143.50 [5.65] P Easy snap-on mounting onto the DIN-Rail 7.00 [0.30] (TS35/7.5 or TS35/15), unit sits safeIy and 1 124.50 [4.90] S 116.60 [4.59] CONSTRUCTION DRAN120 N L N AC INPUT 7 9 7 9 GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] 120.00[4.72] - 400.00[15.75] ±0.80[0.03] www.chinfa.com 2014.09.09 Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range Screw terminal: AWG24-10 (0.2~4mm2 ) flexible / solid cable, -Input connector can withstand torque at maximum 9 pound-inches. -Output connector can withstand torque at maximum 5.5 pound-inches. 8 m/m stripping at cable end recommends Detachable connector: AWG24-12 (0.2~2.5mm2 ) flexible / solid cable, -Input connector can withstand torque at maximum 4.5 pound-inches. -Output connector can withstand torque at maximum 7 pound-inches. 4~5 m/m stripping at cable end recommends Use copper conductors only, 60 / 75oC [email protected] P3 DRAN120 SERIES PIN ASSIGNMENT Designation PIN NO. OUT 1 2 3, 4 5, 6 IN 7 8 OTHER 9 Description RDY A normal open relay contact for DC ON level control (Never connect except 24V model) V+ V - Positive output terminal Negative output terminal L N DC ON Ground this terminal to minimize high-frequency emissions Input terminals (phase conductor, no polarity at DC input) Input terminals (neutral conductor, no polarity at DC input) Operation indicator LED DC LOW voltage indicator LED DC LO Vout ADJ. Trimmer-potentiometer for Vout adjustment Single / Parallel select switch (Except AL/BL models) S/P CIRCUIT SCHEMATIC ‧Block diagram for DRAN120 series L Fuse Filter N Inrush Current Limiter, Rectifier and Auto Select 115 / 230 Vac Vo + PFC Circuit Smoothing Circuit Y Switching Rectifier Device PWM Controller Current Detection Vo Single / Parallel Select 2) Opto Isolation Reference & Error Amp. Opto Isolation Over Voltage Detection Vout ADJ. Output Level Detection DC ON (Green LED) DC LOW (Red LED) RDY 1) (Relay Contact) Note: 1) For 24V Model Only 2) AL/BL Models without this function TYP. CURRENT LIMITED CURVE Output Voltage [ % ] DRAN120-24x 100 75 230 Vac 115 Vac 50 25 0 100 110 120 130 140 150 160 Output Current [ % ] DERATING CURVE TYP. EFFICIENCY CURVE DRAN120-24x 85 EFFICIENCY [ % ] Power out [ % ] 100 75 Safe Operating Area 0 -35 www.chinfa.com 2014.09.09 80 75 70 230 Vac 115 Vac 65 60 61 Temperature [ oC ] 71 10 25 50 Power out [ % ] 75 100 [email protected] P4