Model C200N50Z4 Surface Mount Termination 200 Watts, 50Ω Description The C200N50Z4 is high performance Aluminum Nitride (AlN) surface mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 degree couplers and for use in microstrip circuits. The termination is also RoHS compliant! General Specifications Features: Resistive Element Substrate Terminal Finish Operating Temperature • RoHS Compliant • 200 Watts • DC - 2.2 GHz Thick film AlN Ceramic Matte Tin over Nickel Barrier -50 to +200°C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. • AlN Ceramic Electrical Specifications • Non-Nichrome Resistive Element 50 Ohms, ± 2% 200 Watts DC – 2.2 GHz >20 dB to 2.2 GHz • 100% Tested Resistance Value: Power: Frequency Range: Return Loss • Small Size Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. • Low VSWR Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model C200N50Z4 Typical Performance: C200N50Z4 C200N50Z4 Power De-rating: Tape & Reel [Available]: *Actual performance could be limited by the solder properties of the application Mounting Footprint and Procedure: 2 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.