Model J100N50X4B

Model J100N50X4B
Half Flange Termination
100 Watts, 50Ω
Description
The J100N50X4B is high performance Aluminum Nitride (AlN) half flange
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
combiners. The termination is also RoHS compliant!
General Specifications
Features:
• RoHS Compliant
• 100 Watts
• DC – 4.0 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
Resistive Element
Substrate
Mounting Flange
Operating Temperature
Thick Film
AlN Ceramic
Copper, nickel plated per QC-N-290
-55°C to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
Power:
Frequency Range:
Return Loss
50 Ohms, ± 2%
100 Watts
DC – 4.0 GHz
> 26 dB to 1.3 GHz
> 22 dB to 4.0GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
• 100% Tested
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
LEAD LENGTH: 0.150” MIN
1 of 2
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model J100N50X4B
Typical Performance:
Smith Chart 1
110
90
80
70
1.00
120
60
0.50
130
50
140
40
150
Return Loss (dB)
0.00
-5.00
-10.00
-15.00
-20.00
-25.00
-30.00
-35.00
-40.00
-45.00
-50.00
0.00
100
30
160 0.20
20
170
180
10
0.50
1.00
2.00
-0.20 0
-0.50
0.00
-170
-160
-20
-150
1.00
2.00
Freq (GHz)
3.00
-30
-140
4.00
-40
-130
-120
-50
-60
-110
Power De-rating:
-10
-1.00
-100
-90
-80
-70
Mounting Footprint and Procedure:
*Actual performance could be limited by the solder properties of the
application
2 of 2
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392