Model BD1722N5050AHF Rev B Ultra Low Profile 0404 Balun 50Ω to 50Ω Balanced Description The BD1722N5050AHF is a low profile, low impedance sub-miniature unbalanced to balanced transformer targeted at the GSM, CDMA, WCDMA and UMTS designed for differential inputs and output locations on modern chipsets in an easy to use surface mount package. The BD1722N5050AHF is ideal for high volume manufacturing and delivers higher performance than traditional ceramic baluns. The BD1722N5050AHF has an unbalanced port impedance of 50Ω and a 50Ω balanced port impedance. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD1722N5050AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. Features: • • • • • • • • • • 1700 – 2200 MHz 0.57 mm Height Profile 50 Ohm to 2 x 25 Ohm Class Leading CMRR Targeted at GSM, CDMA, WCDMA and UMTS Applications Surface Mountable Tape & Reel Non-conductive Top Surface RoHS Compliant Halogen Free ROOM (25°°C) Parameter Min. Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling @85C Power Handling @105C Operating Temperature 1700 Typ. 50 50 16.3 0.82 0.42 3.42 29 12.5 Max Unit 2200 MHz Ω Ω dB dB dB Degrees dB Watts Watts ºC 1.02 0.79 6.82 0.75 0.45 +105 -55 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Top View (Near-side) Side View Bottom View (Far-side) .24 .57±.05 1.04±.10 3x .27 1 2 .24 3x .27 .30 .30 1.04±.10 .50 3x .25 3 4 3x .25 Pin Designation GND / DC Feed 1 + RF GND Dimensions are in Millimeters Mechanical Outline 2 Unbalanced Port 3 Balanced Port 4 Balanced Port Visit us at www.Anaren.com .50 Tolerances are Non-Cumulative USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1722N5050AHF Rev B Typical Performance: 1600 MHz. to 2300 MHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 Frequency [MHz] 2200 2250 2300 2250 2300 2000 1950 1900 1850 1800 1750 1700 2300 2250 -20 2200 -2 2150 -15 2100 -1.5 2050 -10 2000 -1 1650 0 -5 1600 0 -0.5 1950 2200 5 1900 2150 0.5 1850 2150 10 1800 2100 1 1750 2100 15 deg 2 1.5 1700 2050 Phase Balance 20 1650 2050 Amplitude Balance 1600 2000 Frequency [MHz] Frequency [MHz] [dB] 1950 1600 2300 2250 2200 2150 2100 2050 2000 1950 1900 1850 1800 -3.6 1750 -36 1700 -3.3 1650 -3 -33 1900 -2.7 -30 1850 -2.4 -27 1800 -2.1 -24 1750 -1.8 -21 1700 -18 1650 [dB] 0 1600 [dB] Return Loss - Input 0 Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 2300 2250 2200 2150 2100 2050 2000 1950 1900 1850 1800 1750 1700 1650 -36 1600 [dB] -15 Frequency [MHz] Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1722N5050AHF Rev B Wide Band Performance: 500 MHz. to 8500 MHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 7000 7500 8000 8500 8000 8500 5500 5500 5000 4500 4000 3500 3000 2500 2000 1500 8500 8000 7500 7000 -20 6500 -2 6000 -15 5500 -1.5 5000 -10 4500 -1 500 0 -5 1000 0 -0.5 4000 7500 5 3500 6500 0.5 3000 7000 10 2500 6500 1 2000 6000 15 deg 2 1.5 1500 5000 Phase Balance 20 1000 6000 Amplitude Balance 500 4500 Frequency [MHz] Frequency [MHz] [dB] 4000 500 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 -3.6 2000 -36 1500 -3.3 1000 -3 -33 3500 -2.7 -30 3000 -2.4 -27 2500 -2.1 -24 2000 -1.8 -21 1500 -18 1000 [dB] 0 500 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 -36 500 [dB] -15 Frequency [MHz] Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1722N5050AHF Rev B Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. With No DC Bias 3x Transmission Line 3x .29 With DC Bias Plated thru hole to ground Plated thru hole to ground .33 3x Transmission Line 3x .29 .33 3x .29 .33 3x .29 .22 .50 .50 .22 .22 .22 .50 .50 Circuit Pattern Circuit Pattern Footprint Pad (s) Footprint Pad (s) Solder Resist Dimensions are in Millimeters Mounting Footprint Visit us at www.Anaren.com Solder Resist Dimensions are in Millimeters Mounting Footprint USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD1722N5050AHF Rev B Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282