SMD Bridge Rectifiers Z4GP206-HF Thru. Z4GP210-HF Reverse Voltage: 600 to 1000 Volts Forward Current: 2.0 A RoHS Device Halogen free ABS(Z4) 0.213(5.40) 0.205(5.20) 0.132(3.35) 0.128(3.25) Features - Intermal structure with GPRC (Glass passivated rectifier chip) inside. - + ~ ~ 0.232(5.90) 0.224(5.70) - Lead less chip form, no lead damage. 0.047(1.20) 0.039(1.00) - Low power loss, High efficiency. R0.25±0.05 0.037(0.95) 0.033(0.85) - High current capability. - Plastic package has Underwriters Laboratory Flammability Classification 94V-0 . 0.053(1.35) 0.041(1.05) Mechanical data Dimensions in inches and (millimeter) - Case: Packed with FRP substrate and epoxy underfilled. Circuit Diagram - Terminals: Pure Tin plated (Lead-Free), solderable per MIL-STD-750, method 2026. - Polarity: Laser marking symbols 4 1 - + ~ ~ 3 2 - Weight: 0.11 grams (approx). Abolute Maximum Rating (at T =25°C unless otherwise noted) A Symbol Z4GP206-HF Z4GP208-HF Z4GP210-HF Unit Repetitive Peak Reverse Voltage VRRM 600 800 1000 V Average Forward Current I(AV) 2.0 A Peak Forward Surge Current, 8.3mS single half sine-wave, superimposed on rated load (JEDEC Method) IFSM 50 A TJ -55 to +175 °C TSTG -55 to +175 °C Parameter Operating Temperature Range Storage Temperature Range Electrical Characteristics (at T =25°C unless otherwise noted) A Parameter Forward Voltage Repetitive peak reverse current Symbol VF IRRM Min. Typ. Max. Unit IF = 2.0A - 0.95 1.00 V VR=Max. VRRM, Ta=25°C - 0.08 5 uA 10.4 - A S 25 - pF 95 - °C/W 15 - °C/W Conditions Current squared time It t<8.3ms, Ta = 25°C - Junction capacitance CJ VR=4V, f=1.0MHz - Junction to ambient (Note) - Junction to lead (Note) - 2 Rth(JA) Thermal resistance Rth(JL) 2 Notes: Thermal resistance, junction to ambient,measured on PC board with 5.0*5.0mm(0.03mm thick) land areas. Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 1 QW-JBR04 Comchip Technology CO., LTD. SMD Bridge Rectifiers RATING AND CHARACTERISTIC CURVES (Z4GP206-HF Thru. Z4GP210-HF) Fig.2- Maximum Non-Repetitive Peak Forward Surge Current 2.5 60 Peak forward surge current, (A) Average Forward Rectified Current, (A) Fig.1- Forward Current Derating Curve 2.0 1.5 1.0 0.5 60Hz resistive or inductive load 0 0 25 50 75 100 125 150 30 20 10 1 10 100 Number Of Cycles At 60Hz Fig.3- Typical Instantaneous Forward Characteristics Fig.4- Typical Reverse Characteristics 100 Instantaneous Reverse Leakage current, (uA) Instantaneous Forward Current, (A) 40 Case Temperature, (°C) 1.0 0.1 TJ=25°C PULSE WIDTH=300uS 0 50 0 175 10 0.01 8.3ms Single Half Sine-Wave (JEDEC Method) 0.2 0.4 0.6 0.8 1.0 1.2 o TJ=150 C 10 o TJ=125 C 1.0 0.1 o TJ=25 C 0.01 1.3 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage, (V) Fig.5 - Typical Junction Capacitance Junction Capacitance, (pF) 100 10 1 0.1 1 10 100 Reverse Voltage, (V) Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 2 QW-JBR04 Comchip Technology CO., LTD. SMD Bridge Rectifiers Reel Taping Specification d P0 P1 - Index hole F + ~ ~ T E W B P C A 12 o 0 D2 D1 D W1 Trailer ....... ....... End Device ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed ABS(Z4) ABS(Z4) SYMBOL A B C d D D1 D2 (mm) 5.65 ± 0.10 6.15 ± 0.10 1.45 ± 0.10 1.50 ± 0.10 330 ± 2.00 50.0 MIN. 13.0 ± 0.50 (inch) 0.222 ± 0.004 0.242 ± 0.004 0.057 ± 0.004 0.059 ± 0.004 12.992 ± 0.079 1.969 MIN. 0.512 ± 0.020 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 12.00 ± 0.30 14.4 MAX. (inch) 0.069 ± 0.004 0.217 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.472 ± 0.012 0.567 MAX. Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 3 QW-JBR04 Comchip Technology CO., LTD. SMD Bridge Rectifiers Marking Code Part Number Marking Code Z4GP206-HF Z4GP20J Z4GP208-HF Z4GP20K Z4GP210-HF Z4GP20M ~ Z4GP 20J YWW. + ~ Y = Last digit of the year 0 = 2010 1 =2011 2 = 2012 Z4GP = Series code 20 = Amps class(2.0A) J = Voltage Class J = 600V K = 800V M = 1000V . = Halogen- free type WW = Mfg week 01 = First week 02 = Second week 03 = Third week Suggested PAD Layout 0.165(4.20) 0.157(4.00) 0.229(5.82) 0.221(5.62) 0.063(1.60) 0.055(1.40) 0.047(1.20) 0.039(1.00) Standard Packaging REEL PACK Case Type ABS(Z4) REEL Reel Size ( pcs ) (inch) 5,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 4 QW-JBR04 Comchip Technology CO., LTD.