CLD-AP20 Rev 8B Binning & Labeling Cree® XLamp® MC-E LED MC-E White MC-E Color MC-E Dynamic White Table of Contents Introduction Bin and Order Code Format (White)...............................................2 This document describes the product nomenclature required to Bin and Order Code Format (EasyWhite®).....................................3 select and order Cree XLamp® MC-E LEDs. XLamp MC-E LEDs Bin and Order Code Format (Dynamic White)...............................4 are tested and sorted into bins which are then combined into Bin and Order Code Format (Color)...............................................5 orderable kits identified by an order code. Performance Groups – Brightness................................................6 Performance Groups – Chromaticity.............................................7 All XLamp LEDs are tested and sorted by color and brightness Performance Groups – Dominant Wavelength.............................9 into a unique bin. Each bin contains LEDs from only one color Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE and brightness group and is uniquely identified by a bin code. Curve................................................................................................9 White XLamp LEDs are sorted by chromaticity (color) and Standard Order Codes and Bins luminous flux (brightness). Color XLamp LEDs are sorted by MC-E Cool White....................................................................12 dominant wavelength (color) and luminous flux (brightness). MC-E Neutral White...............................................................13 LEDs are shipped on reels containing LEDs from one bin and are MC-E Warm White.................................................................14 always labeled with the appropriate bin code. MC-E Dynamic White.............................................................14 MC-E EasyWhite®...................................................................15 Kits contain LEDs from a number of similar bins and are fully MC-E Color.............................................................................16 defined by their order codes. A full explanation of the order codes for XLamp MC-E LEDs, as well as a list of standard order www.cree.com/Xlamp codes, is provided in this document. Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® MC-E LED Binning & Labeling Bin and Order Code Format (White) Bin codes and order codes are configured in the following manner: Series MCE = MC-E Color WT = White Optical characteristic 2 = Lambertian Order Code Kit number SSSGCC-BD-HHHH-NNNNNN Internal code CRI A = Standard CRI Number of chips 4 = 4 chips Series MCE = MC-E Color WT = White CRI A = Standard CRI Bin Code Chromaticity group Luminous flux group SSSGCC-BD-WWW-FF-G-AAAAA Internal code Optical characteristic Number of chips 4 = 4 chips Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 2 XLamp ® MC-E LED Binning & Labeling Bin and Order Code Format (EasyWhite®) Bin codes and order codes are configured in the following manner: Series MCE = MC-E CRI A = Standard CRI H = 80 CRI P = 85 CRI U = 90 CRI Order Code Internal code SSSCCC-BD-HHHH-NNNNNNNNN Kit number Optical characteristic Color EZW = EasyWhite Series MCE = MC-E CRI A = Standard CRI H = 80 CRI P = 85 CRI U = 90 CRI Bin Code Chromaticity group Internal code SSSCCC-BD-WWW-FF-GG-AAAA Flux group Optical characteristic Color EZW = EasyWhite Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 3 XLamp ® MC-E LED Binning & Labeling Bin and Order Code Format (Dynamic White) Bin codes and order codes are configured in the following manner: Series MCE = MC-E CRI A = Standard CRI Order Code Internal code SSSCCC-BD-HHHH-NNNNNNNNN Kit number Optical characteristic Color DWT = Dynamic White Series MCE = MC-E CRI A = Standard CRI Flux group Bin Code Internal code SSSCCC-BD-FFFF-WWWW00000 Chromaticity group Optical characteristic Color DWT = Dynamic White Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 4 XLamp ® MC-E LED Binning & Labeling Bin and Order Code Format (Color) Bin codes and order codes are configured in the following manner: Series MCE = MC-E Color CT = Red, green, blue, white Optical characteristics 2 = Lambertian Order Code Internal code Dominant wavelength kit (RGB) SSSGCC-BD-HHHH-NNNNNNNNN Chromaticity kit for white Flux kit Internal code Package configuration A = Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Series MCE = MC-E Color CT = Red, green, blue, white Optical characteristics 2 = Lambertian Dominant wavelength bin for each die (RGB) Bin Code Internal code SSSGCC-BD-HHHH-NNNMMMKKK Chromaticity bin for white die Flux bin for each die (RGBW) Package configuration A = Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 5 XLamp ® MC-E LED Binning & Labeling Performance Groups – Brightness XLamp MC-E White and EasyWhite® LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Minimum Luminous Flux @ 350 mA (lm) Maximum Luminous Flux @ 350 mA (lm) F 210 240 G 240 280 H 280 320 J 320 370 K 370 430 M 430 490 • Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 mA. • The flux and chromaticity are measured with all LEDs lit simultaneously. Each die in the XLamp MC-E Dynamic White LED is tested individually for luminous flux and placed into one of the following luminous flux groups. For the XLamp MC-E Dynamic White LED the flux groups specify only a minimum per-die flux and do not specify a maximum. Color White Group Code Minimum Luminous Flux @ 350 mA G 70 H 80 J 90 K 100 Each LED die in the XLamp MC-E Color LED is tested individually for luminous flux and placed into one of the following luminous-flux groups. The luminous-flux groups for the XLamp MC-E Color LED specify only minimum flux and do not have a maximum. Color Group Code Minimum Luminous Flux @ 350 mA Red K 30.6 Green P 67.2 Blue E 8.2 White J 80 K 100 Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 6 XLamp ® MC-E LED Binning & Labeling Performance Groups – Chromaticity (IF = 350 ma Per Emitter) XLamp MC-E White LEDs and the white LED in the XLamp MC-E Color LED are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. The XLamp MC-E White and EasyWhite LEDs are tested with each LED die connected to independent drive circuits at 350 mA and all LED die lit simultaneously. The white LED in the XLamp MC-E Color LED is tested individually. Region WK WA WM WB WE WN WC Region 3A 4A x y x y .283 .295 .298 .288 .287 .276 .292 .306 .295 .297 .283 .284 .279 x y .284 .314 .355 .297 .316 .332 .306 .322 .301 .342 .317 .319 .329 .330 .329 .318 .291 .318 .308 .295 .297 .329 .345 .308 .311 .329 .330 .310 .300 .317 .319 .298 .288 .316 .332 .306 .322 .329 .369 .308 .311 .329 .345 .295 .297 .316 .332 .292 .306 .314 .355 .301 .342 .329 .330 .306 .322 .329 .345 .292 .306 .346 .359 .287 .321 .344 .342 .308 .311 .348 .384 .317 .319 .346 .359 .318 .308 .329 .345 .310 .300 .329 .369 .316 .332 .317 .319 .308 .311 .306 .322 Region Region WF WP WD WG WJ WH x y Region x y Region x y .3371 .3490 .3376 .3616 .3463 .3687 .3451 .3554 .3451 .3554 .3463 .3687 .3551 .3760 .3533 .3620 .3440 .3428 .3451 .3554 .3533 .3620 .3515 .3487 .3366 .3369 .3371 .3490 .3451 .3554 .3440 .3428 .3512 .3465 .3529 .3597 .3615 .3659 .3590 .3521 .3529 .3597 .3548 .3736 .3641 .3804 .3615 .3659 .3615 .3659 .3641 .3804 .3736 .3874 .3702 .3722 .3590 .3521 .3615 .3659 .3702 .3722 .3670 .3578 3B 4B 3C 4C 3D 4D Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 7 XLamp ® MC-E LED Binning & Labeling Performance Groups – Chromaticity (continued) Region 5A 6A 7A 8A 40F 40H x y Region x y Region x y Region x y .3670 .3578 .3702 .3722 .3825 .3798 .3783 .3646 .3702 .3722 .3736 .3874 .3869 .3958 .3825 .3798 .3825 .3798 .3869 .3958 .4006 .4044 .3950 .3875 .3783 .3646 .3825 .3798 .3950 .3875 .3898 .3716 .3889 .3690 .3941 .3848 .4080 .3916 .4017 .3751 .3941 .3848 .3996 .4015 .4146 .4089 .4080 .3916 .4080 .3916 .4146 .4089 .4299 .4165 .4221 .3984 .4017 .3751 .4080 .3916 .4221 .3984 .4147 .3814 5B 6B 5C 6C 5D 6D .4147 .3814 .4221 .3984 .4342 .4028 .4259 .3853 .4221 .3984 .4299 .4165 .4430 .4212 .4342 .4028 .4342 .4028 .4430 .4212 .4562 .4260 .4465 .4071 .4259 .3853 .4342 .4028 .4465 .4071 .4373 .3893 .4373 .3893 .4465 .4071 .4582 .4099 .4483 .3919 .4465 .4071 .4562 .4260 .4687 .4289 .4582 .4099 .4582 .4099 .4687 .4289 .4813 .4319 .4700 .4126 .4483 .3919 .4582 .4099 .4700 .4126 .4593 .3944 .3744 .3685 .3981 .3800 .4242 .3919 .4475 .3994 .3782 .3837 .4040 .3966 .4322 .4096 .4573 .4178 .3912 .3917 .4186 .4037 .4449 .4141 .4695 .4207 .3863 .3758 .4116 .3865 .4359 .3960 .4589 .4021 .3784 .3741 .4030 .3857 .4291 .3973 .4528 .4046 .3804 .3818 .4061 .3941 .4333 .4062 .4578 .4138 .3867 .3857 .4132 .3976 .4395 .4084 .4638 .4152 .3844 .3778 .4099 .3890 .4351 .3994 .4586 .4021 7B 8B 35F 35H 7C 8C 30F 30H 7D 8D 27F 27H XLamp MC-E DynamicWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. Color Color Code A Cool White B Warm White H CCx CCy 0.3140 0.3550 0.2937 0.3312 0.3009 0.3042 0.3170 0.3190 0.329 0.369 0.329 0.33 0.3144 0.3166 0.3099 0.3509 0.4562 0.4260 0.4813 0.4319 0.4646 0.4034 0.4418 0.3981 Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 8 XLamp ® MC-E LED Binning & Labeling Performance Groups – Dominant Wavelength The red, green and blue LEDs in the XLamp MC-E Color LED are tested individually for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color DWL Group Minimum DWL @ 350 mA Maximum DWL @ 350 mA K 450 455 460 Blue Green Red L 455 M 460 465 2 520 525 3 525 530 4 530 535 A 620 630 Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve Cool White Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 9 XLamp ® MC-E LED Binning & Labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve - Continued Neutral and 0.45 Warm White 0.44 2600 K 3000 K 3200 K 0.42 3500 K 7B 4000 K 0.40 6C 4300 K 0.39 0.37 0.36 3B 6A ANSI C78.377A 5A 4D 4A 3D 0.35 7A 5D 4B 3C 8D 6D 5B 4C 8A 7D 5C 4750 K 5300 K 0.38 6B 4500 K 5000 K 8C 8B 7C 3700 K 0.41 CCy 2700 K 2900 K 0.43 3A 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Dynamic 0.46 White 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 H 4500 K 0.40 5000 K 0.39 5700 K CCy 0.38 0.37 6500 K 0.36 0.35 0.34 8000 K B 0.33 A 0.32 0.31 0.30 0.29 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 10 XLamp ® MC-E LED Binning & Labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve - continued EasyWhite 0.45 0.44 0.43 3000 K 3500 K 0.42 4000 K 0.41 CCy 2700 K ANSI C78.377 Quadrangle EasyWhite "F" (4-Step) Chromaticity Regions 4500 K 27F 0.40 30F 0.39 35F 0.38 40F 0.37 0.36 0.45 0.43 0.49 0.48 0.47 0.46 0.45 0.44 0.43 CCx 2700 K ANSI C78.377 Quadrangle EasyWhite "H" (2-Step) Chromaticity Regions 0.44 3000 K 3500 K 0.42 4000 K 0.41 CCy 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 4500 K 27H 30H 0.40 35H 0.39 0.38 40H 0.37 0.36 0.49 0.48 0.47 0.46 0.45 0.44 CCx 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 11 XLamp ® MC-E LED Binning & Labeling Standard Order Codes and Bins (MC-E Cool White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Kit Number Flux (lm) Cool White (5000 K – 10,000 K) K M 370 430 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 000K01 WC, WD, WF, WG 000K02 WC, WD, WF, WG, WH, WJ, WN, WP 000K03 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 000M01 WC, WD, WF, WG 000M02 WC, WD, WF, WG, WH, WJ, WN, WP 000M03 For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MC-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 12 XLamp ® MC-E LED Binning & Labeling Standard Order Codes and Bins (MC-E Neutral White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Flux (lm) H 280 Chromaticity Regions Kit Number CCT 5C, 5D, 6A, 6B 000HF6 3700 K 3A, 3B, 3C, 3D 000JE3 5000 K Neutral White (3700 K - 5000 K) J K M 320 370 430 3C, 3D, 4A, 4B 000JF4 4750 K 4A, 4B, 4C, 4D 000JE4 4500 K 4C, 4D, 5A, 5B 000JF5 4300 K 5A, 5B, 5C, 5D 000JE5 4000 K 5C, 5D, 6A, 6B 000JF6 3700 K 3A, 3B, 3C, 3D 000KE3 5000 K 3C, 3D, 4A, 4B 000KF4 4750 K 4A, 4B, 4C, 4D 000KE4 4500 K 4C, 4D, 5A, 5B 000KF5 4300 K 5A, 5B, 5C, 5D 000KE5 4000 K 5C, 5D, 6A, 6B 000KF6 3700 K 3A, 3B, 3C, 3D 000ME3 5000 K 3C, 3D, 4A, 4B 000MF4 4750 K 4A, 4B, 4C, 4D 000ME4 4500 K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MC-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order codewithout advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 13 XLamp ® MC-E LED Binning & Labeling Standard Order Codes and Bins (MC-E Warm White) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Minimum Luminous Flux (lm) @ 350 mA* Group Chromaticity Regions Kit Number CCT Flux (lm) Warm White (2600 K - 3700 K) G H J K 240 280 320 370 7C, 7D, 8A, 8B 000GF8 2900 K 8A, 8B, 8C, 8D 000GE8 2700 K 6A, 6B, 6C, 6D 000HE6 3500 K 6C, 6D, 7A, 7B 000HF7 3200 K 7A, 7B, 7C, 7D 000HE7 3000 K 7C, 7D, 8A, 8B 000HF8 2900 K 8A, 8B, 8C, 8D 000HE8 2700 K 6A, 6B, 6C, 6D 000JE6 3500 K 3200 K 6C, 6D, 7A, 7B 000JF7 7A, 7B, 7C, 7D 000JE7 3000 K 7C, 7D, 8A, 8B 000JF8 2900 K 8A, 8B, 8C, 8D 000JE8 2700 K 6A, 6B, 6C, 6D 000KE6 3500 K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MC-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels influx bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Standard Order Codes and Bins (MC-E Dynamic White) The following table provides the two order codes for XLamp MC-E Dynamic White LEDs. Part Dynamic White Color CCT / Dominant Wavelength Range Minimum Luminous Flux (lm) @ 350 mA Group Flux (lm) 2 cool-white die 6500 K K 100 2 warm-white die 2700 K G 70 2 cool-white die 6000 K K 100 2 warm-white die 2700 K G 70 Order Code MCEDWT-A1-0000-0000A1001 MCEDWT-A1-0000-0000A1002 Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 14 XLamp ® MC-E LED Binning & Labeling Standard Order Codes and Bins (MC-E EasyWhite®) The following table provides order codes for XLamp MC-E EasyWhite LEDs. Color CCT Range 4000 K 3500 K Standard CRI EasyWhite 3000 K 2700 K 4000 K 3500 K 80-CRI Minimum EasyWhite 3000 K 2700 K 85-3CRI Minimum EasyWhite 3000 K 2700 K Minimum Luminous Flux @ 350 mA, 25° C 2-Step Chromaticity Region 4-Step Group Flux (lm) K 370 J 320 K 370 J 320 H 280 J 320 H 280 J 320 H 280 G 240 MCEEZW-A1-0000-0000G027H J 320 MCEEZW-H1-0000-0000J040H H 280 J 320 H 280 J 320 H 280 J 320 H 280 G 240 H 280 G 240 H 280 G 240 40H Order Code MCEEZW-A1-0000-0000K040H MCEEZW-A1-0000-0000J040H Chromaticity Region 40F MCEEZW-A1-0000-0000K035H 35H MCEEZW-A1-0000-0000J035H MCEEZW-A1-0000-0000J030H MCEEZW-A1-0000-0000H030H 35F 40H 35H 30H MCEEZW-A1-0000-0000H027H MCEEZW-H1-0000-0000H040H MCEEZW-H1-0000-0000J035H MCEEZW-H1-0000-0000H035H MCEEZW-H1-0000-0000J030H MCEEZW-H1-0000-0000H030H 30F MCEEZW-H1-0000-0000H027H 27F 27H MCEEZW-P1-0000-0000H030H MCEEZW-P1-0000-0000G030H MCEEZW-P1-0000-0000H027H MCEEZW-P1-0000-0000G027H MCEEZW-A1-0000-0000J030F MCEEZW-A1-0000-0000H030F MCEEZW-A1-0000-0000H027F MCEEZW-A1-0000-0000G027F 40F 35F 30F MCEEZW-H1-0000-0000J040F MCEEZW-H1-0000-0000H040F MCEEZW-H1-0000-0000J035F MCEEZW-H1-0000-0000H035F MCEEZW-H1-0000-0000J030F MCEEZW-H1-0000-0000H030F MCEEZW-H1-0000-0000J027F 27F MCEEZW-H1-0000-0000G027H 30H MCEEZW-A1-0000-0000J035F MCEEZW-A1-0000-0000J027F MCEEZW-H1-0000-0000J027H 27H MCEEZW-A1-0000-0000J040F MCEEZW-A1-0000-0000H035F MCEEZW-A1-0000-0000J027H 27H MCEEZW-A1-0000-0000K040F MCEEZW-A1-0000-0000K035F MCEEZW-A1-0000-0000H035H 30H Order Code MCEEZW-H1-0000-0000H027F MCEEZW-H1-0000-0000G027F 30F 27F MCEEZW-P1-0000-0000H030F MCEEZW-P1-0000-0000G030F MCEEZW-P1-0000-0000H027F MCEEZW-P1-0000-0000G027F Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 15 XLamp ® MC-E LED Binning & Labeling Preliminary 29,bins. 2009 The following tables list standard kit numbers April and performance Kit numbers completely describe an order code’s Standard Order Codes and Bins (MC-E Color) color or chromaticity bins and luminous Flux Characteristics (Tflux =range. 25°C) Red, Green, Blue and White (RGBW) J Product Color Configuration Red Red Green Green Blue MC-E Color (RGBW) XLamp MC-E LED Standard Order Codes - Color Min Luminous Flux (lm) Minimum Luminous Flux (lm) Dominant Wavelength (nm) @ 350 mA* @ 350 mA* Color DWL / Chromaticity Bins Kit Code Flux (lm) Kit Code Min. Max. Group Flux (lm) White** Red Blue A5 K 30.6 30.6 A 620 P 67.2 67.2 A 520 2, 3, 4 E White K Red K Green P Green Blue Blue White A4 8.2 95 30.6 8.2 100 30.6 67.2 A A1 A A Order Code Kit Number 630 535 K, L, M 450 465 WC, WD, WF, WG WG, WF, WC, WD A 620 630 2, 3, 4 E 67.2 8.2 A 520 K, L, M 535 J 8.2 80 A 5A, 5B, 5C, 5D 450 465 00A5AAAA1 MCE4CT-A2-0000-00A5AAAA1 00A4AAAB1 MCE4CT-A2-0000-00A4AAAB1 White** 80 5A, 5B, 5C, 5D For other flux and chromaticity combinations, contact Cree orB1an authorized distributor. * Cree XLamp MC-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher * Cree maintains a tolerance on flux than the minimum specifiedofby±7% the order codemeasurement. without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. ** Chromaticity bins for white emitter: Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 16