Cree® LMR4 LED Module with EasyWhite® Technology CLM-DS03 LMR4 EZW Rev 0B Product family data sheet Cree LED Modules provide a simple solution for lighting designers and manufacturers to adopt best-in-class LED lighting from Cree. The LMR series continues Cree’s history of innovation in LEDs for lighting applications and provides a comprehensive solution for LED light sources. This versatile LED lighting module allows design flexibility with a fully integrated, small form factor design that is also drop-in compatible with the LMR4 Cree TrueWhite® Technology version that provides higher color quality. The Cree LED Module LMR4 EasyWhite is the ideal choice for general indoor and outdoor lighting applications that require an LED solution with excellent color consistency. The compact module form factor is a benefit to lighting manufacturers seeking a simple solution to adopt LED lighting or cost-effectively expand their existing LED-lighting product portfolio. Features • • • • • • • Comprehensive solution with driver electronics, optics and core thermals 700 lm @ 2700, 3000, 3500 and 4000 K CCT Supports dimming to 5% Designed to last at least 35,000 hours at L70 Versatile form factor Cree IES LM-80 data in support of US ENERGY STAR® qualification The LMR4 (120 V) is UL-recognized and California Title 24-compliant Benefits for End Users www.cree.com/modules • Vibrant color rendering showcases the full beauty of people, rooms and merchandise with > 80 CRI • Uniform, visually comfortable appearance whether powered on or off by means of proprietary optics • Consistent light quality over time and temperature delivered by built-in optical management system • Dimming down to 5% of rated light output using standard incandescent and electronic low-voltage dimmers • No UV or mercury Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 LMH4 LED Modules Characteristics The following table provides several base order codes for the Cree LED module LMR4, as well as a description of the order-code nomenclature. Color CCT* Nominal Luminous Flux (lm) CRI Input Power Input Voltage/ Frequency Power Factor Order Code Neutral White 4000 K 700 80 12 W 120 V/60 Hz >.80 LMR040-0700-40F8-10100EW Warm White 3500 K 700 80 12 W 120 V/60 Hz >.80 LMR040-0700-35F8-10100EW Warm White 3000 K 700 80 12 W 120 V/60 Hz >.80 LMR040-0700-30F8-10100EW >.80 LMR040-0700-27F8-10100EW 8 Warm White F 7 2700 K 700 6 80 5 12 W 4 120 V/60 Hz 3 1 2 REV. DATE NAME DESCRIPTION OF CHANGE * Refer to Chromaticity section below for more details. F 114.0 Note: Cree maintains a tolerance of +/- 7% on flux and power measurements. Form Factor E 4.00 The Cree LED module LMR4 is constructed with a durable15.00 machined aluminum housing and comes complete with an integrated thermal management system. This system conducts heat away from LEDs and transfers it to the mounting plate junction, providing luminaire 30.00 designers with the design. A flexibility to further optimize their thermal A E Form factor and measurements are shown below and additional details are also available by downloading the STEP file from www.cree. com/modules. The standard product configuration consists of the module with the mounting plate attached. A custom fit heat sink is also available and can be ordered separately in units of 10 (part number LMR040-HS00-0000-0000010). 8 D 7 6 4 5 1 2 3 REV. DATE NAME DESCRIPTION OF CHANGE D The weight of the module with mounting plate is approximately 250 grams and 150 grams for the heat sink. 100.89 103.4 114.000 F F 56.97 C C THERMOCOUPLE LOCATION 38.0 E E A A 79.45 B B D D SECTION A-A 103.400 UNLESS OTHERWISE SPECIFIED: DRAWN DIMENSIONS ARE IN MM TOLERANCES: A NAME DATE -- 04/11/08 Operating temperature of the Cree LED Module LMR4 is between 0 °C and 50 °C. The lifetime and performance estimates described in this document apply only if the product’s Thermal Management Guidelines (below) are adhered to and no modifications are made except MODULE ASSEMBLY as described in this document. CREE LAA000054 A C (c) CREE 2008 ANGULAR: 2 TWO PLACE DECIMAL CHECKED .25MM A TITLE: ENG APPR. MFG APPR. PROPRIETARY AND CONFIDENTIAL INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF CREE LED LIGHTING SOLUTIONS, INC. ANY FINISH REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF CREE , INC. IS PROHIBITED. DO NOT SCALE DRAWING C Q.A. THIRD ANGEL PROJECTION SIZE DWG. NO. REV SCALE: 1:1 WEIGHT: SHEET 1 OF 4 C The LED module is flexible; use of the detachable mounting plate or optional heat sink depends on the design requirements. Secondary optics may be added to the module diffuser and lens but will likely reduce light output and could also alter the color characteristics of the 38.000 final luminaire design. 8 7 6 5 4 3 2 1 77.5 B Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. TC ATTACHEMENT 2 SECTION A-A B cd vs. Angle LMH4 LED Modules Thermal management guidelines The Cree LED module LMR4 is designed to perform in a variety of environments; however, the LED module lifetime is highly dependent upon the operating temperature. To achieve lifetime and performance estimates, and maintain the warranty, the final design cannot exceed 70 degrees Celsius at thermal equilibrium, based on the thermocouple (Tc) location shown in the Form Factor section above.Follow the mechanical and thermal design guidelines listed in the Cree LMR4 LED Module Design Guide to ensure proper thermal management. photometry Intensity (Candlepower) Summary Angle Mean CP 0 365.33 5 362.08 15 340.77 25 300.22 35 245.59 45 184.32 55 124.33 65 71.01 75 37.00 85 27.62 90 0.10 eeware IES viewer that I downloadedZonal Lumens Summary Zone Lumens % Lamp 0-30 242.9 35% % Fixt 35% 0-40 381.5 55% 55% 0-60 607.6 87% 87% 0-90 700 100% 100% Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 3 LMH4 LED Modules chromaticity The Cree LMR4 LED module provides high color consistency around the specified color temperature. Individual LEDs are tested and matched in order to meet our designed chromaticity specification. Secondary optics can be added to the module but will reduce light output and may also alter the color characteristics of the final luminaire design. EasyWhite Color Temperatures – 4-Step Code CCT 40F 4000 K 35F 3500 K 30F 3000 K 27F 2700 K x y 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 0.4586 0.4203 0.4684 0.4164 0.4569 0.4000 0.4473 0.4037 Cree EasyWhite® Color Temperatures Plotted on the 1931 CIE Curve 0.45 2700K ANSI C78.377 Quadrangle LMR4 EasyWhite Color Temperature 0.44 3000K 0.43 3500K 0.42 4000K CCy 0.41 4500K 27F 0.40 30F 0.39 35F 0.38 40F 0.37 0.36 0.49 0.48 0.47 0.46 0.45 0.44 CCx 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 4 LMH4 LED Modules Order Code Format SSSSSS-LLLL-CCCC-NNNNNNN Series LMR = LED Module round Luminous flux 0700 = 700 lumens nominal CRI 8 = 80 CRI Internal code EZ = EasyWhite Power supply 1 = 120 volt 2 = 230 volt Color temp 27F = 2700 K CCT Form factor 040 = 4-inch diameter Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC. 5