Cree® PLCC6 3 in 1 SMD LED CLX6F-RKB PRODUCT DESCRIPTION FEATURES APPLICATIONS These SMD LEDs are packaged in an • Size (mm):3.5 x 3.4 x 2.8 • Light Strip industry standard PLCC6 package. • Dominant Wavelength: Red (619 - 624nm) • Channel Letter These high reliability and high brightness LEDs are designed to work in a wide range of environmental • Luminous Intensity (mcd) Red (2240-3550) • Backlight condition and are ideally suited for use in illumination applications. Its wide viewing angle makes these LEDs ideally suited for channel letter, or general backlighting and illumination applications. The flat top emitting surface makes it easy for • Water-Resistant (IPX8)* • Moisture Sensitivity Level: 5a • Lead-Free • RoHS Compliant • Matte Surface these LEDs to mate with light pipes. WWW.CREE.COM/HB *:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone. Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp CLD-CT1379.000 PRODUCT FAMILY DATA SHEET Cree PLCC6 3 in 1 SMD LED CLX6F-RKB ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 3 x 50 mA IFP 3 x 200 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 130 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/ambient 1 chip on RTHJA 450 °C/W Junction/solder point 1 chip on RTHJS 230 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Forward Current Note 1 Peak Forward Current Note 2 1000 V Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Condition Symbol Values Dominant Wavelength IF = 3 x 20 mA λDOM 619~624 nm Spectral bandwidth at 50% IREL max IF = 3 x 20 mA Δλ 24 nm Forward Voltage IF = 3 x 20 mA Luminous Intensity IF = 3 x 20 mA Reverse Current (max) VR = 5 V Unit VF(avg) 2.1 V VF(max) 2.6 V IV(min) 2240 mcd IV(avg) 2800 mcd IR 10 μA Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC6 3 in 1 SMD LED CLX6F-RKB INTENSITY BIN LIMIT (IF = 3 X 20 mA) Red Bin Code Min.(mcd) Max.(mcd) S 2240 2800 1b1c 2520 3175 T 2800 3550 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 3 X 20 mA) Red Bin Code Min.(nm) Max.(nm) RB 619 624 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC6 3 in 1 SMD LED CLX6F-RKB ORDER CODE TABLE* Luminous Intensity (mcd) Kit Number Color CLX6F-RKB-CSTBB3 Red CLX6F-RKB-CS1BB3 Red Dominant Wavelength (nm) Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) Package 2240 3550 RB 619 RB 624 Reel RB 619 RB 624 Reel Any 1 Intensity bin from S(2240) - T(3550) Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes.Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color-bin code will be orderable in certain quantities. For example, any 1 intensity bin from S - T means only 1 intensity bin (S or 1b1c or T) will be shipped by Cree. For example, BB means only 1 color bin RB will be shipped by Cree. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC6 3 in 1 SMD LED CLX6F-RKB GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC6 3 in 1 SMD LED CLX6F-RKB GRAPHS ℃ ℃ The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC6 3 in 1 SMD LED CLX6F-RKB MECHANICAL DIMENSIONS All dimensions are in mm. （ （ （ ） ） ） （ （ （ ） ） ） NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC6 3 in 1 SMD LED CLX6F-RKB KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree PLCC6 3 in 1 SMD LED CLX6F-RKB REFLOW SOLDERING • • • • The CLX6F-RKB is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs. The best practices suggestion is to bake 24-hour/80ºC before use. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO.: 13 Temperature Melting-point Pre-heat Soak Reflow Cooling Time Use all SMD besides LP6-NPP1-01-N1 Use only with CLX6F-RKB Solder = Sn63-Pb37 Solder = Lead-free Solder Average ramp-up rate =4ºC/s max. Average ramp-up rate =4ºC/s max Preheat temperature = 150ºC ~200ºC Preheattemperature = 100ºC ~150ºC Preheattemperature = 150ºC ~200ºC Preheattime 100s Preheat time = 120s = max Preheattime = 100s max. Average ramp-up rate = 4ºC/s max max. Ramp-down rate = 6ºC/s max Ramp-down rate =6ºC/s max. Peak temperature = 250ºC=max Peaktemperature 230ºC Ramp-down rate =6ºC/s max. max. Peaktemperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max Time within5ºC of actual Peak Temperature = 10s max. Duration above 217ºC is 60s max Duration above 183ºC is 80s max. Only use LP6-NPP1-01-N1 Time within5ºC of actual Peak Temperature = 10s max. Duration above 217ºC is 80s max. [13] Solder = Low Lead-free Average ramp-up rate =3ºC/s max. Preheattemperature = 130ºC ~170ºC Preheattime = 120s max. Ramp-down rate =6ºC/s max. Peaktemperature = 213ºC max. Time within3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad designfor heat dissipation (2-pin SMD LED): 7.0 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2.6 9 Cree PLCC6 3 in 1 SMD LED CLX6F-RKB PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2800 pcs per reel. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10