CLD-CT1125.001 PRODUCT FAMILY DATA SHEET Cree® PLCC2 1-in-1 SMD LED CLM1S-BKW/GKW PRODUCT DESCRIPTION FEATURES APPLICATIONS SMD LEDs is packaged in the industry • Size (mm):3.2 x 2.7 • Light Strip standard package. These LEDs have • Color and Typical Dominant Wavelength: Blue (470nm) Green (527nm) • Channel Letter high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under illumination application conditions. Its wide viewing angle makes these LEDs ideally suited for channel letter, or general backlighting and illumination applications. The flat top emitting • Architectural Lighting • Luminous Intensity (mcd) CLM1S-BKW: (112 - 355) CLM1S-GKW: (355 - 1120) • Viewing angle: 120 degree • Lead-Free • RoHS Compliant surface makes it easy for these LEDs WWW.CREE.COM/HB to mate with light pipes. Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC2 1 in 1 SMD LED CLM1S-BKW/GKW ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit BKW/GKW Forward Current IF 25 mA IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 100 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient RTHJA 450 °C/W Junction/Solder Point RTHJS 300 °C/W Peak Forward Current Note Note: Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Color Symbol Condition Forward Voltage BKW/GKW VF IF = 20 mA V Reverse Current BKW/GKW IR VR = 5 V μA BKW λD IF = 20 mA nm 460 470 480 GKW λD IF = 20 mA nm 520 527 540 BKW IV IF = 20 mA mcd 112 160 GKW IV IF = 20 mA mcd 355 560 BKW/GKW 2θ½ IF = 20 mA deg Dominant Wavelength Luminous Intensity 50% Power Angle Unit Minimum Typical Maximum 3.4 4.0 10 120 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC2 1 in 1 SMD LED CLM1S-BKW/GKW INTENSITY BIN LIMIT (IF = 20 mA) Blue (CLM1S-BKW) Bin Code Min. (mcd) Max. (mcd) Green (CLM1S-GKW) Bin Code Min. (mcd) Max. (mcd) Ra 112 140 Tb 355 450 Rb 140 180 Ua 450 560 Sa 180 224 Ub 560 710 Sb 224 280 Va 710 900 Ta 280 355 Vb 900 1120 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 20 mA) Blue (CLM1S-BKW) Green (CLM1S-GKW) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) B3 460 465 G7 520 525 B4 465 470 G8 525 530 B5 470 475 G9 530 535 B6 475 480 Ga 535 540 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC2 1 in 1 SMD LED CLM1S-BKW/GKW ORDER CODE TABLE* Luminous Intensity (mcd) Color Kit Number Viewing Angle Blue CLM1S-BKW-CRaTa363 120 Color Kit Number Viewing Angle Green CLM1S-GKW-CTbVb7a3 120 Dominant Wavelength Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) 112 355 B3 460 B6 480 Luminous Intensity (mcd) Dominant Wavelength Min. Max. Color Bin 355 1120 G7 Min. (nm) Color Bin Max. (nm) 520 Ga 540 Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC2 1 in 1 SMD LED CLM1S-BKW/GKW GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC2 1 in 1 SMD LED CLM1S-BKW/GKW MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC2 1 in 1 SMD LED CLM1S-BKW/GKW KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC2 1 in 1 SMD LED CLM1S-BKW/GKW PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2000 pcs per reel. H UMIC HECK w ww .vit ap ac .c om Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8