SMD Color Series CLM3A Blue Green (pdf)

CLD-CT1171.004
PRODUCT FAMILY DATA SHEET
Cree® PLCC2 1-in-1 SMD LED
CLM3A-BKW/GKW
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
SMD LEDs is packaged in the industry
• Size (mm):2.7 x 2.0
• Light Strip
standard package. These LEDs have
• Color and Typical Dominant
Wavelength:
Blue (470nm)
Green (527nm)
• Channel Letter
high reliability performance and are
designed to work under a wide range
of environmental conditions.
This high reliability feature makes
them ideally suited to be used under
illumination application conditions.
Its wide viewing angle makes these
• Architectural Lighting
• Luminous Intensity (mcd)
CLM3A-BKW:(224 - 710)
CLM3A-GKW:(560 - 1800)
• Lead-Free
• RoHS Compliant
LEDs ideally suited for channel letter,
or general backlighting and illumination applications. The flat top emitting
surface makes it easy for these LEDs
WWW.CREE.COM/HB
to mate with light pipes.
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
the Cree logo are registered trademarks of Cree, Inc.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Cree PLCC2 1 in 1 SMD LED
CLM3A-BKW/GKW
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
BKW/GKW
Forward Current
IF
25
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
100
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
110
°C
Peak Forward Current
Note
Note: Pulse width ≤0.1 msec, duty ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Characteristics
Color
Symbol
Condition
Unit
Forward Voltage
BKW/GKW
VF
IF = 20 mA
V
Reverse Current
BKW/GKW
IR
VR = 5 V
μA
Dominant Wavelength
Luminous Intensity
Junction/Solder Point
Minimum
Typical
Maximum
3.4
4.0
10
BKW
λD
IF = 20 mA
nm
460
470
480
GKW
λD
IF = 20 mA
nm
520
527
540
BKW
IV
IF = 20 mA
mcd
224
400
GKW
IV
IF = 20 mA
mcd
560
1000
BKW
RTHJS
IF = 20 mA
°C/W
350
GKW
RTHJS
IF = 20 mA
°C/W
380
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
2
Cree PLCC2 1 in 1 SMD LED
CLM3A-BKW/GKW
INTENSITY BIN LIMIT (IF = 20 mA)
Blue(CLM3A-BKW)
Green (CLM3A-GKW)
Bin Code
Min.(mcd)
Max.(mcd)
Bin Code
Min.(mcd)
Max.(mcd)
Sb
224
280
Ub
560
710
Ta
280
355
Va
710
900
Tb
355
450
Vb
900
1120
Ua
450
560
Wa
1120
1400
Ub
560
710
Wb
1400
1800
Tolerance of measurement of luminous intensity is ±10%.
COLOR BIN LIMIT (IF = 20 mA)
Blue(CLM3A-BKW)
Green (CLM3A-GKW)
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
B3
460
465
G7
520
525
B4
465
470
G8
525
530
B5
470
475
G9
530
535
B6
475
480
Ga
535
540
Tolerance of measurement of dominant wavelength is ±1 nm.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
3
Cree PLCC2 1 in 1 SMD LED
CLM3A-BKW/GKW
ORDER CODE TABLE*
Luminous Intensity (mcd)
Dominant Wavelength
Color
Kit Number
Min.
Max.
Color Bin
Min.(nm)
Color Bin
Max.(nm)
Blue
CLM3A-BKW-CSbUb363
224
710
B3
460
B6
480
Blue
CLM3A-BKW-CTaUa453
280
560
B4
465
B5
475
Color
Kit Number
Min.
Max.
Color Bin
Min.(nm)
Color Bin
Max.(nm)
Green
CLM3A-GKW-CUbWb7a3
560
1800
G7
520
Ga
540
Green
CLM3A-GKW-CVaWa8a3
710
1400
G8
525
Ga
540
Green
CLM3A-GKW-CVaWa793
710
1400
G7
520
G9
535
Green
CLM3A-GKW-CVbWb7a3
900
1800
G7
520
Ga
540
Luminous Intensity (mcd)
Dominant Wavelength
Notes:
1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one
intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin
codes will not be orderable.
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
4
Cree PLCC2 1 in 1 SMD LED
CLM3A-BKW/GKW
GRAPHS
(RELATIVE LUMINOUS INTENSITY)
IF (mA)
5.0
100.0
4.0
80.0
Blue
60.0
3.0
Blue
Green
40.0
2.0
20.0
1.0
VF(V)
0.0
3.0
3.4
3.8
4.6
4.2
5.0
-50
-40
-30
-20
-10
0.0
0
20
40
60
80
IF(mA)
100
FIG.2 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Vr(V)
Green
0
(RELATIVE LUMINOUS INTENSITY)
0
100%
-10
80%
-20
60%
-30
40%
-40
20%
Blue
-50
Ir(uA)
FIG.3 BLUE&GREEN REVERSE CURRENT
VS. REVERSE VOLTAGE.
0%
300
Green
400
500
600
700
WL(nm)
800
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
(RELATIVE LUMINOUS INTENSITY)
IF(mA)
1.0
50
40
30
0.5
20
Rth j-a=450 C/W
10
0
0
20
40
60
80
Ta( C)
100
FIG.5 BLUE&GREEN MAXIMUM FORWARD DC CURRENT VS AMBIENT
TEMPERATURE (Tjmax=110 C)
0
-90
Angle
-60
-30
0
30
60
90
FIG.6 FAR FIELD PATTERN
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
5
Cree PLCC2 1 in 1 SMD LED
CLM3A-BKW/GKW
MECHANICAL DIMENSIONS
All dimensions are in mm.
NOTES
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
6
Cree PLCC2 1 in 1 SMD LED
CLM3A-BKW/GKW
KIT NUMBER SYSTEM
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and
brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp
Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
7
Cree PLCC2 1 in 1 SMD LED
CLM3A-BKW/GKW
PACKAGING
•
•
•
•
•
The boxes are not water resistant and they must be kept away from water and moisture.
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
The reel pack is applied in SMD LED.
Max 2500 pcs per reel.
CARRIER TAPE
PACKAGE MARKING
4.0
3.3
2.25
T APE FEED DIRECTION
8.0
1.75
4.0
3.5
1.5
COVER TAPE
REEL(178x8mm)
Label
HUMIDITY INDICATOR
HUMICHECK
H UMIDITY IN DICA TOR
DAN GE RO US
DO N O T EAT
DESICCANT
═KD〥 〦
I
〢
A
╪DC
I
〢
〤
I
w ww .v itapac.com
V102
Label
POLYETHYLENE BAG
Label
A CARTON
(240x220x35mm)
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
8