CLD-CT1156.005 PRODUCT FAMILY DATA SHEET Cree® PLCC2 1-in-1 SMD LED CLM3C-RKW/AKW PRODUCT DESCRIPTION FEATURES APPLICATIONS SMD LEDs is packaged in the industry • Size (mm):2.7 x 2.0 • Light Strip standard package. These LEDs have • Color and Typical Dominant Wavelength: Red (624nm) Amber (591nm) • Channel Letter high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under illumination application conditions. Its wide viewing angle makes these • Architectural Lighting • Luminous Intensity (mcd) CLM3C-RKW:(560 - 1400) CLM3C-AKW:(355 - 900) • Lead-Free • RoHS Compliant LEDs ideally suited for channel letter, or general backlighting and illumination applications. The flat top emitting surface makes it easy for these LEDs WWW.CREE.COM/HB to mate with light pipes. Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC2 1 in 1 SMD LED CLM3C-RKW/AKW ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit RKW/AKW Forward Current IF 50 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient RTHJA 450 °C/W Junction/Solder Point RTHJS 300 °C/W Electrostatic Discharge Classification (MIL-STD-883E) ESD Peak Forward Current Note Class 2 Note: Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Color Symbol Condition Unit Forward Voltage RKW/AKW VF IF = 20 mA V Reverse Current RKW/AKW IR VR = 5 V μA RKW λD IF = 20 mA nm 618 624 630 AKW λD IF = 20 mA nm 584 591 596 RKW IV IF = 20 mA mcd 450 710 AKW IV IF = 20 mA mcd 355 700 Dominant Wavelength Luminous Intensity Minimum Typical Maximum 2.1 2.6 10 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC2 1 in 1 SMD LED CLM3C-RKW/AKW ÌNTENSITY BIN LIMIT (IF = 20 mA) Red(CLM3C-RKW) Amber (CLM3C-AKW) Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Ua 450 560 Tb 355 450 Ub 560 710 Ua 450 560 Va 710 900 Ub 560 710 Vb 900 1120 Va 710 900 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 20 mA) Red (CLM3C-RKW) Amber (CLM3C-AKW) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RA 618 630 A2 584 587 A3 587 590 A4 590 593 A5 593 596 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC2 1 in 1 SMD LED CLM3C-RKW/AKW ORDER CODE TABLE* Luminous Intensity (mcd) Dominant Wavelength Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Red CLM3C-RKW-CUaVbAA3 450 1120 RA 618 RA 630 Red CLM3C-RKW-CUbVaAA3 560 900 RA 618 RA 630 Color Kit Number Amber Amber Luminous Intensity (mcd) Dominant Wavelength Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) CLM3C-AKW-CTbVa253 355 900 A2 584 A5 596 CLM3C-AKW-CUbVa353 560 900 A3 587 A5 596 Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC2 1 in 1 SMD LED CLM3C-RKW/AKW GRAPHS (RELATIVE LUMINOUS INTENSITY) IF (mA) 100.0 5.0 80.0 4.0 Red 60.0 3.0 Red Amber 40.0 2.0 Amber 20.0 1.0 0.0 1.8 VF(V) 2.0 2.2 2.6 2.4 2.8 -60 -50 -40 -30 -20 0.0 40 20 60 80 IF(mA) 100 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vr(V) 0.0 -10 0 (RELATIVE LUMINOUS INTENSITY) 100% -10 80% -20 60% -30 40% -40 20% Amber -50 Ir(uA) FIG.3 RED&AMBER REVERSE CURRENT VS. REVERSE VOLTAGE. 0% 300 400 500 Red 600 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. (RELATIVE LUMINOUS INTENSITY) IF(mA) 1.0 100 80 60 Rth j-s=300 C/W 0.5 40 Rth j-a=450 C/W 20 0 0 20 40 60 80 Ta( C) 100 FIG.5 RED&AMBER MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) 0 -90 Angle -60 -30 0 30 60 90 FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC2 1 in 1 SMD LED CLM3C-RKW/AKW MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC2 1 in 1 SMD LED CLM3C-RKW/AKW KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC2 1 in 1 SMD LED CLM3C-RKW/AKW PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2500 pcs per reel. CARRIER TAPE PACKAGE MARKING 4.0 3.3 2.25 T APE FEED DIRECTION 8.0 1.75 4.0 3.5 1.5 COVER TAPE REEL(178x8mm) Label HUMIDITY INDICATOR HUMICHECK H UMIDITY IN DICA TOR DAN GE RO US DO N O T EAT DESICCANT ═ＫＤ〥 〦 Ｉ 〢 Ａ ╪ＤＣ Ｉ 〢 〤 Ｉ w ww .v itapac.com V102 Label POLYETHYLENE BAG Label A CARTON (240x220x35mm) Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8