CLD-CT1165.008 PRODUCT FAMILY DATA SHEET Cree® PLCC4 3-in-1 SMD LED CLVBA-FKA PRODUCT DESCRIPTION FEATURES APPLICATIONS These SMD LEDs are packaged in an • Size (mm):3.2 x 2.8 • Full-Color Video Screen industry standard PLCC4 package. • Dominant Wavelength: Red (619 - 624nm) Green (520 - 540nm) Blue (460 - 480nm) • Decorative lighting These high reliability and high brightness LEDs are designed to work in a wide range of environmental conditions. A wide viewing angle and high brightness makes these LEDs suitable for indoor signage applications. • Amusement • Luminous Intensity (mcd) @IF=20mA Red (224 - 560) Green (280 - 900) Blue (90 - 355) • Lead-Free WWW.CREE.COM/HB • RoHS Compliant Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC4 3 in 1 SMD LED CLVBA-FKA ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 50 25 25 mA IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 130 100 100 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 450 400 450 °C/W Junction/ambient 3 chips on RTHJA 650 580 680 °C/W Junction/solder point 1 chip on RTHJS 300 280 300 °C/W Junction/solder point 3 chips on RTHJS 450 430 480 °C/W Forward Current Note 1 Peak Forward Current Note 2 Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Condition Symbol Dominant Wavelength IF = 20 mA λDOM Spectral bandwidth at 50% IREL max IF = 20 mA Forward Voltage Luminous Intensity Luminous Intensity Reverse Current (max) IF = 8 mA IF = 20 mA IF = 8 mA VR = 5 V Values Unit R G B 619~624 520~540 460~480 nm Δλ 24 38 28 nm VF(avg) 1.9 3.0 3.0 V VF(max) 2.4 3.6 3.6 V IV(min) 224 280 90 mcd IV(avg) 320 500 160 mcd IV(min) 71 140 36 mcd IV(avg) 112 224 56 mcd IR 10 10 10 μA Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 3 in 1 SMD LED CLVBA-FKA INTENSITY BIN LIMIT (IF = 8 mA) Red Bin Code Min.(mcd) Green Max.(mcd) Bin Code Blue Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) A 71 90 D 140 180 L8 36 45 3a4 81 101 9a 160 202 3g3f 41 51 B 90 112 E 180 224 L9 45 56 56 101 126 bc 202 252 3e3d 51 64 C 112 140 F 224 280 L 56 71 78 126 160 de 252 318 3c3b 64 81 D 140 180 G 280 355 A 71 90 9a 160 202 fg 318 403 3a4 81 101 E 180 224 H 355 450 B 90 112 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 8 mA) Red Green Bin Code Min.(nm) Max.(nm) RB 619 624 Bin Code Min.(nm) Blue Max.(nm) Bin Code Min.(nm) Max.(nm) G7 520 525 B3 460 465 G23 522.5 527.5 B23 462.5 467.5 G8 525 530 B4 465 470 G45 527.5 532.5 B45 467.5 472.5 G9 530 535 B5 470 475 G67 532.5 537.5 B67 472.5 477.5 Ga 535 540 B6 475 480 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 3 in 1 SMD LED CLVBA-FKA ORDER CODE TABLE* Luminous Intensity (mcd) Kit Number Color CLVBA-FKA-CAEDH8BBB7a363 Blue CLVBA-FKA-CA1D181BB7D3D3 CLVBA-FKA-CC1F1L1BB7D3D3 Dominant Wavelength (nm) Color Bin Min. (nm) Color Bin Max. (nm) Package RB 619 RB 624 Reel Min. Max. Red 71 224 Green 140 450 Any 1 hue bin from G7(520) - Ga(540) Reel 36 112 Any 1 hue bin from B3(460) - B6(480) Reel Red Any 1 Intensity bin from A(71) - E(224) Green Any 1 Intensity bin from D(140) - H(450) Any 1 hue bin from G7(520) - Ga(540) RB Reel Blue Any 1 Intensity bin from L8(36) - B(112) Any 1 hue bin from B3(460) - B6(480) Reel Red Any 1 Intensity bin from C(112) - E(224) Green Any 1 Intensity bin from F(224) - H(450) Any 1 hue bin from G7(520) - Ga(540) Reel Blue Any 1 Intensity bin from L(56) - B(112) Any 1 hue bin from B3(460) - B6(480) Reel RB 619 619 RB RB 624 624 Reel Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes.Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color bin code will be orderable in certain quantities. 2. For example, any 1 intensity-bin from A - E means only 1 intensity-bin (A or 3a4 or B or 56 or C or 78 or D or 9a or E) will be shipped by Cree. 3. For example, any 1 color-bin from G7 - Ga means only 1 color-bin (G7 or G23 or G8 or G45 or G9 or G67 or Ga) will be shipped by Cree. 4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 3 in 1 SMD LED CLVBA-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 3 in 1 SMD LED CLVBA-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC4 3 in 1 SMD LED CLVBA-FKA MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 3 in 1 SMD LED CLVBA-FKA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree PLCC4 3 in 1 SMD LED CLVBA-FKA REFLOW SOLDERING • • • • The CLVBA-FKA is rated as a MSL 5a product. The recommended floor life out of bag is 24hrs. The best practices suggestion is to bake 24-hour/80ºC before use. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO.: 13 Temperature Melting-point Pre-heat Soak Reflow Cooling Time Use all SMD besides LP6-NPP1-01-N1 Use only with CLVBA-FKA Soldering pad: Solder = Sn63-Pb37 Solder = Lead-free Preheattemperature = 150ºC ~200ºC Preheattime 100s Preheat time = 120s = max Preheattime = 100s max. max. Ramp-down rate = 6ºC/s max Ramp-down rate =6ºC/s max. Peak temperature = 235ºC=max Peaktemperature 230ºC Ramp-down rate =6ºC/s max. max. Peaktemperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max Time within5ºC of actual Peak Temperature = 10s max. Duration above 217ºC is 45s max Duration above 183ºC is 80s max. Only use LP6-NPP1-01-N1 Preheattemperature 100ºC ~150ºC Preheat temperature = 150ºC=~200ºC Average ramp-up rate =4ºC/s max Average ramp-up rate = 4ºC/s max Solder Average ramp-up rate =4ºC/s max. Time within5ºC of actual Peak Temperature = 10s max. Duration above 217ºC is 80s max. [13] Solder = Low Lead-free Average ramp-up rate =3ºC/s max. Preheattemperature = 130ºC ~170ºC Preheattime = 120s max. Ramp-down rate =6ºC/s max. Peaktemperature = 213ºC max. Time within3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad designfor heat dissipation (2-pin SMD LED): 7.0 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2.6 9 Cree PLCC4 3 in 1 SMD LED CLVBA-FKA PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2000 pcs per reel. H UMIC HECK w ww .vit ap ac .c om Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10