CLD-CT1256.002 PRODUCT FAMILY DATA SHEET Cree® P4 LED CP41A-RDS/ADS CP41A-RFS/AFS CP41A-RHS/AHS PRODUCT DESCRIPTION FEATURES APPLICATIONS This revolutionary package design • Size (mm): 7.6 x 7.6 • Channel Letter • Color and Typical Dominant Wavelength: Red (624nm) Amber(591nm) • Amusement • Luminous Flux (mlm) CP41A-RDS:(4400-11000) CP41A-RFS:(4400-11000) CP41A-RHS:(4400-11000) CP41A-ADS:(4400-11000) CP41A-AFS:(4400-11000) CP41A-AHS:(4400-11000) reflectors or lenses to efficiently • Lead - Free distribute • RoHS Compliant allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical-package design and highcurrent capabilities. The low-profile package can be easily coupled with light and provide the desired lit appearance. This product family employs green and blue LED materials, which allows designers to match the color of many lighting applications such as vehicle signal WWW.CREE.COM/HB lamps and amusement lighting. Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree P4 LED CP41A-RDS/ADS CP41A-RFS/RFS CP41A-RHS/AHS ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Red/Amber Forward Current Peak Forward Current IF 70 mA Note1 IFP 100 mA VR 5 V PD (Red) 238 mW PD (Amber) 224 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max. 260°C for 5 sec. max. (3 mm from the base of the epoxy bulb) ESD Class 2 Note2 Reverse Voltage Power Dissipation Electrostatic Discharge Classification (MIL-STD-883E) Note: 1.A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Color Forward Voltage Reverse Current Dominant Wavelength Red Luminous Flux Amber Symbol Condition Unit Red VF IF = 70 mA Typical Maximum V 2.3 3.2 2.5 Amber VF IF = 70 mA V Red/Amber IR VR = 5 V μA Red λD IF = 70 mA nm 620 624 630 Amber λD IF = 70 mA nm 587 591 596 CP41A-RDS (40 degree) Φv IF = 70 mA mlm 4400 5300 CP41A-RFS (70 degree) Φv IF = 70 mA mlm 4400 5500 CP41A-RHS (100 degree) Φv IF = 70 mA mlm 4400 6000 CP41A-ADS (40 degree) Φv IF = 70 mA mlm 4400 6200 CP41A-AFS (70 degree) Φv IF = 70 mA mlm 4400 6600 4400 7200 CP41A-AHS (100 degree) 50% Power Angle Minimum 3.2 100 Φv IF = 70 mA mlm CP41A-RDS/ADS 2θ½ IF = 70 mA deg 40 CP41A-RFS/AFS 2θ½ IF = 70 mA deg 70 CP41A-RHS/AHS 2θ½ IF = 70 mA deg 100 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree P4 LED CP41A-RDS/ADS CP41A-RFS/RFS CP41A-RHS/AHS FLUX BIN LIMIT (IF = 70 mA) Red Amber CP41A-RDS/RFS/RHS (40/70/100 degree) CP41A-ADS/AFS/AHS (40/70/100 degree) Bin Code Min.(mlm) Max.(mlm) Bin Code Min.(mlm) Max.(mlm) L0 4400 5500 L0 4400 5500 M0 5500 6600 M0 5500 6600 N0 6600 8730 N0 6600 8730 P0 8730 11000 P0 8730 11000 • Tolerance of measurement of luminous flux is ±15% COLOR BIN LIMIT (IF = 70 mA) Red Amber Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RJ 620 630 A3 587 590 A4 590 593 A5 593 596 • Tolerance of measurement of dominant wavelength is ±1 nm VF BIN LIMIT (IF = 70 mA) Red Amber Bin Code Min.(V) Max.(V) Bin Code Min.(V) Max.(V) 23 2.0 2.2 23 2.0 2.2 24 2.2 2.4 24 2.2 2.4 25 2.4 2.6 25 2.4 2.6 26 2.6 2.8 26 2.6 2.8 27 2.8 3.0 27 2.8 3.0 28 3.0 3.2 28 3.0 3.2 • Tolerance of measurement of VF is ±0.05V. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree P4 LED CP41A-RDS/ADS CP41A-RFS/RFS CP41A-RHS/AHS ORDER CODE TABLE* Luminous Flux (mlm) Dominant Wavelength Color Kit Number Viewing Angle Red CP41A-RDS-CL0P0JJ4 40 Color Kit Number Viewing Angle Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) Red CP41A-RFS-CL0P0JJ4 70 4400 11000 RJ 620 RJ 630 Color Kit Number Viewing Angle Min. Red CP41A-RHS-CL0P0JJ4 100 Red CP41A-RHS-CM0P0JJ4 Red CP41A-RHS-CN0P0JJ4 Color Kit Number Viewing Angle Amber CP41A-ADS-CL0P0354 Amber Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) 4400 11000 RJ 620 RJ 630 Luminous Flux (mlm) Dominant Wavelength Luminous Flux (mlm) Dominant Wavelength Max. Color Bin Min. (nm) Color Bin Max. (nm) 4400 11000 RJ 620 RJ 630 100 5500 11000 RJ 620 RJ 630 100 6600 11000 RJ 620 RJ 630 Luminous Flux (mlm) Dominant Wavelength Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) 40 4400 11000 A3 587 A5 596 CP41A-ADS-CL0P0454 40 4400 11000 A4 590 A5 596 Color Kit Number Viewing Angle Min. Amber CP41A-AFS-CL0P0354 70 Amber CP41A-AFS-CL0P0454 70 Amber CP41A-AFS-CM0P0354 70 Color Kit Number Viewing Angle Min. Amber CP41A-AHS-CL0P0354 100 Amber CP41A-AHS-CM0P0354 100 Amber CP41A-AHS-CM0P0454 100 Luminous Flux (mlm) Dominant Wavelength Max. Color Bin Min. (nm) Color Bin Max. (nm) 4400 11000 A3 587 A5 596 4400 11000 A4 590 A5 596 5500 11000 A3 587 A5 596 Luminous Flux (mlm) Dominant Wavelength Max. Color Bin Min. (nm) Color Bin Max. (nm) 4400 11000 A3 587 A5 596 5500 11000 A3 587 A5 596 5500 11000 A4 590 A5 596 Notes: 1. The above kit numbers represent order codes which include multiple flux-bin and color-bin codes. Only one flux-bin code and one color-bin code will be shipped on each reel. And single flux-bin code,single color bin-codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree P4 LED CP41A-RDS/ADS CP41A-RFS/RFS CP41A-RHS/AHS GRAPHS (RELATIVE LUMINOUS FLUX) IF (mA) 1.25 100.0 1.0 80.0 Red 0.75 60.0 Amber 40.0 0.5 20.0 0.25 0.0 VF(V) 2.0 2.2 2.4 2.6 2.8 3.0 -60 -50 -40 -30 -20 0.0 0 Amber 20 40 60 80 IF(mA) 100 FIG.2 RELATIVE LUMINOUS FLUX VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vr(V) Red (RELATIVE LUMINOUS INTENSITY) -10 0 100% -10 80% -20 60% -30 40% -40 20% Amber -50 Ir(uA) FIG.3 Red & Amber REVERSE CURRENT VS. REVERSE VOLTAGE. IF(mA) 100 0% 300 400 500 Red 600 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. CP41A-RDS/ADS 50% Power Angle : 40 (RELATIVE LUMINOUS INTENSITY) 0 1.0 80 60 0.5 40 20 Ta( C) 40 20 60 80 100 0 FIG.5 Red & Amber MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) 0 0 -60 -90 -30 FIG.6 FAR FIELD PATTERN 0 30 60 Angle 90 The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree P4 LED CP41A-RDS/ADS CP41A-RFS/RFS CP41A-RHS/AHS CP41A-RFS/AFS CP41A-RHS/AHS 50% Power Angle : 70 50% Power Angle : 100 (RELATIVE LUMINOUS INTENSITY) 0 1.0 (RELATIVE LUMINOUS INTENSITY) 0 1.0 0.5 0.5 0 -60 -90 -30 FIG.7 FAR FIELD PATTERN 0 30 60 Angle 90 0 -90 -60 -30 FIG.8 FAR FIELD PATTERN 0 30 60 Angle 90 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree P4 LED CP41A-RDS/ADS CP41A-RFS/RFS CP41A-RHS/AHS MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. CP41A-RDS/ADS: CP41A-RFS/AFS: NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree P4 LED CP41A-RDS/ADS CP41A-RFS/RFS CP41A-RHS/AHS MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. CP41A-RHS/AHS: NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree P4 LED CP41A-RDS/ADS CP41A-RFS/RFS CP41A-RHS/AHS KIT NUMBER SYSTEM All dimensions in mm.Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 9 Cree P4 LED CP41A-RDS/ADS CP41A-RFS/RFS CP41A-RHS/AHS PACKAGING Features: • • • • • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation. The boxes are not water resistant, and they must be kept away from water and moisture. The Tube Pack type of packaging. Max 60 pcs per tube. R xxx xxx R C OL OR LED LAMP T YPE LXXXXXXXX-XXX LOT J OWAXXXXX -XX-XXX QT Y RANK P CS Iv Vf Hu e X XX XX AX XXX XXX XXX X Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10