LP1910M0603BT LOW PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount low pass filter with a small size of 1.6 X 0.8 X 0.5 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS Symbol Dimension (mm) L 1.60 ± 0.15 0.55 dB max (-40°C to +85°C) W 0.80 ± 0.15 VSWR 2.0 max T 0.50 max Impedance 50 Ω A 0.45 ± 0.15 30 dB @ 3420 - 3570 MHz B 0.70 ± 0.15 25 dB @ 3700 - 3820 MHz C, D 0.20 ± 0.15 E 0.25 ± 0.15 F 0.30 ± 0.15 P/N LP1910M0603BT Specification 1710-1910 MHz Frequency range 0.45 dB max (25°C) Insertion Loss (max) Attenuation (min.) 25 dB @ 5130 - 5730 MHz Operating temperature range -40°C to +85°C TERMINAL CONFIGURATION P1 P2 P4 P3 PIN Definition P1 Input P2 GND P3 Output P4 GND PCB DESIGN/LAYOUT CONSIDERATION Note: - Design trace width to be 50Ω impedance. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 LP1910M0603BT LOW PASS FILTER SPECIFICATION Rev. A Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989