BP2500E0805BT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.00 X 1.25 X 1.05 mm, RoHS compliant. 2. Provide low insertion loss, high rejection rate, and low profile. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS Specification Symbol Dimension (mm) 2400 - 2500 MHz 1.00 dB max. at +25°C 1.20 dB max. -40°C to +85°C L 2.00 ± 0.15 VSWR 2.0 max W 1.25 ± 0.10 Impedance 50 Ω T 1.05 max 21.0 dB @ 902 - 928 MHz A, E 0.20 ± 0.10 22.0 dB @ 4800 - 5000 MHz B, G 0.30 ± 0.10 34.0 dB @ 7200 - 7500 MHz C 0.35 ± 0.10 D 0.65 ± 0.10 F 0.475 ± 0.10 H 0.20 ± 0.10 P/N BP2500E0805BT Frequency range Insertion Loss (max) Attenuation (min.) 29.0 dB @ 9600 - 10000 MHz -40°C to +85°C Operating temperature range TERMINAL CONFIGURATION P1 P2 P3 P7 P6 P4 Definition PIN Definition P1 GND P5 GND P2 NC P6 NC P3 GND P7 GND P4 OUT P8 IN P5 Frontier Electronics Corp.® http://www.frontierusa.com PIN P8 Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500E0805BT BAND PASS FILTER SPECIFICATION Rev. A PCB DESIGN/LAYOUT CONSIDERATION Note: - Unit in mils - Design trace width to be 50Ω impedance. Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989