BP2500A1310AT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 3.2 X 2.5 X 1.5 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500A1310AT Specification Symbol Dimension (mm) 0.6 dB max L 3.20 ± 0.20 VSWR 1.7 max W 2.50 ± 0.20 Impedance 50 Ω T 1.50 ± 0.10 40dB @ 1500 MHz A 0.40 ± 0.20 Attenuation (min.) 30dB @ 2100 MHz B 0.65 ± 0.20 C 0.50 ± 0.20 D 0.20 ± 0.15 Frequency range 2400 - 2500 MHz Insertion Loss 2.5 dB max Ripple 30dB @ 4800 MHz Operating temperature range -40°C to +85°C TERMINAL CONFIGURATION PIN Definition P1 Input/Output P2 GND P3 Output/Input P4 GND PCB DESIGN/LAYOUT CONSIDERATION Note: - Design trace width to be 50Ω impedance. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500A1310AT BAND PASS FILTER SPECIFICATION Rev. A Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989