POSEICO SPA Via Pillea 42-44, 16153 Genova - ITALY Tel. + 39 010 8599400 - Fax + 39 010 8682006 Sales Office: Tel. + 39 010 8599400 - Fax + 39 010 8681180 POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation AUS501 RECTIFIER DIODE NEW Repetitive voltage up to 600 V Mean forward current Surge current 6955 A 55 kA TARGET SPECIFICATION ott 04 - ISSUE : 01 Symbol Characteristic Conditions Tj [°C] Value Unit BLOCKING V RRM Repetitive peak reverse voltage 190 600 V V RSM Non-repetitive peak reverse voltage 190 600 V I RRM Repetitive peak reverse current 190 75 mA V=VRRM CONDUCTING I F (AV) Mean forward current 180° sin ,50 Hz, Th=55°C, double side cooled 6955 A I F (AV) Mean forward current 180° sin ,50 Hz, Tc=85°C, doubl e side cooled 7890 A I FSM Surge forward current Sine wave, 10 ms without reverse voltage 55 kA I² t 190 I² t 15125 x 1E3 V FM Forward voltage V F(TO) r F Forward current = 6000 A A²s 190 0.94 V Threshold voltage 190 0.70 V Forward slope resistance 190 0.040 mohm SWITCHING t rr Reverse recovery time Q rr Reverse recovery charge I rr Peak reverse recovery current µs 190 µC A MOUNTING R th(j-h) Thermal impedance, DC Junction to heatsink, double side cooled R th(c-h) Thermal impedance Case to heatsink, double side cooled T j Operating junction temperature F Mounting force 14 °C/kW 5 °C/kW -30 / 190 °C 25.0 Mass / 50.0 50 ORDERING INFORMATION : AUS501 S 06 standard specification VRRM/100 kN g AUS501 RECTIFIER DIODE TARGET SPECIFICATION POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation ott 04 - ISSUE : 01 FORWARD CHARACTERISTIC Tj = 190 °C SURGE CHARACTERISTIC Tj = 190 °C 60 25000 50 40 15000 ITSM [kA] Forward Current [A] 20000 10000 30 20 5000 10 0 0 0 0,5 1 1,5 2 Forward Voltage [V] 1 10 n°cycles TRANSIENT THERMAL IMPEDANCE DOUBLE SIDE COOLED 16,0 φ 44 mm 3.45 ± 0.2 mm 14,0 Zth j-h [°C/kW] 12,0 10,0 8,0 6,0 4,0 2,0 φ 50 mm 0,0 0,001 0,01 0,1 1 10 t[s] Distributed by All the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < .03 mm and roughness < 2 µm. In the interest of product improvement POSEICO SPA reserves the right to change any data given in this data sheet at any time without previous notice. If not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported.