TSS1230F-01 Series – CCFL INVERTER TRANSFORMERS Rev. A A. Specifications: P/N Suitable Frequency (KHz) Mark Max. Open Voltage (V rms) Max. Lamp Watt. (W) Efficiency TSS1230F-01 90 ~ 140 TSS1230-01 750 1.2 75% B. Dimensions: mm (Inch) Series a b c d e f g h i j k m 12.3 10.6 3.0 7.5 8.0 2.0 ×4 0.6 8.0 6.8 4.0 2.5 1.4 ×7 Max. Max. Max. Typ. Typ. Typ. Typ. Typ. Typ. Typ. Typ. Typ. TSS1230F-01 (0.484) (0.417) (0.118) (0.295) (0.315) (0.079) (0.024) (0.315) (0.268) (0.157) (0.098) (0.055) Tol. Recommended Foot Patterns C. Electrical Data: Winding Start L (@ 100KHz,1.0V) Finish DCR Ω (@ 25°C) 1 N2 8 2 N1 8 5 60.0 mH ± 15 % 270 ± 20 % N3 N1 3 N2 1 2 11.0 uH ± 15 % 0.550 ± 20 % 4 N3 2 3 11.0 uH ± 15 % 5 N4 0.550 ± 20 % 9 N4 4 9 0.67 uH ± 15 % 0.170 ± 20 % Turn ratio: N2: N1 = N3: N1 = 1: 67.5 D. Insulation: Term Item Spec. Hi-Pot Coil to Coil 500 VAC / 1 Minute Hi-Pot Coil to Core 500 VAC / 1 Minute Isolation Coil to Coil 100 MOHM Min. Condition @Cut off current=3mA @ 100 VDC E. Features: 1. 2. 3. 4. 5. Low profile height: Maximum 3.0mm. Drum / Ring type: Ferrite core (Ni – Zn). High efficiency. Surface mount. Suitable for standard IR re-flows soldering. 6. Solder pads are gold plated. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 TSS1230F-01 Series – CCFL INVERTER TRANSFORMERS Rev. A F. Uses: 1. Black Light power supplies transformer available. 2. FL Inverter. 3. PDA Inverter G. Supplementary Information: 1. Packaging Information SMD CCFL INVERTER TRANSFORMERS Reel dimensions (mm) Tape dimensions (mm) Parts per reel Quantity per Series P/N A B C D E W P P0 P1 h t 13” Box Carton TSS1230F-01 340 20.2 13 30.4 24.4 24.0 16.0 4 2 3.10 0.30 1,000 1,000 8,000 2. RoHS Reflow Solder Profile: Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989