Keylock Switches Antistatic Process Sealed Keylock Switches 45° POS 3 POS 2 45° POS 1 SK Series POS 2 0.5 Typ 45° 45° POS 4 POS 3 10.7 10.7 45° 45° POS 1 POS 5 0.7 Typ 0.6 Typ 0.3 Typ 9.0 2 3 1 C 4 5 2.54 Typ 2.0 9.0 Dia 9.0 Dia 10.7 10.7 3 Position 3.5 6.7 18.0 5.08 20.7 10.16 5 Position SK13AEG13 Straight PC with Bracket On 3-position models terminals 1 & 5 are support pins. POS 1 45° POS 1 12.0 POS 2 6.65 0.7 POS 5 2 0.3 9.0 Dia 10.16 10.16 9.5 2.0 18.0 6.7 3.5 2.54 Typ 2.54 2.54 Typ 11.7 Keylock Switches 5 Position On 3-position models terminals 1 & 5 are support pins. Key Positions Model 4 0.6 Typ POLES, CIRCUITS & KEY-REMOVABLE POSITIONS Pole & Throw 3 5.08 9.0 Dia 3 Position 9.0 45° POS 4 0.5 Typ C 5 45° 4.0 POS 3 0.5 Typ SK15AEG30 Right Angle PC POS 3 6.65 45° 4.0 1 45° 45° 12.0 10.7 POS 2 Pos 1 Pos 2 Pos 3 CUTAWAY Connected Terminals Pos 4 Pos 5 Pos 1 Pos 2 Pos 3 Pos 4 Schematic Pos 5 = Key Removable = Not Removable = Maximum Arc C1 SP3T SK13A ON ON ON --- --- COM-1 COM-2 COM-3 --- POS 1 --- 2 3 1 2 3 C1 SP5T SK15A ON ON ON ON ON COM-1 COM-2 COM-3 COM-4 COM-5 2 POS 1 3 4 5 1 2 3 4 5 KEY STRAIGHT PC TERMINALS WITH BRACKET RIGHT ANGLE PC 2.54 Typ 2.54 Typ 1 2 C 3 5 4 4 5 3 C 2 1 1.0 Dia Typ 2.54 Typ 1.0 Dia Typ 5.08 All specifications are restricted to QA test criteria. DRW: D.L. JIN, CHK: D.F. LEE, APP: H.Z. QIU How to order: I03 SK 1 2 3 4 5 POLES: SP3T / SP5T E 2 POSITIONS: ON-ON.ON.NONE-NONE ON-ON-ON-ON-ON G 3 KEY REMOVABLE: All Positions 13 30 3 5 A [email protected] 5.08 General Specifications: 1 1 2.54 Typ 6 4 BUSHING: 9mm Diameter Smooth 5 CONTACT MATERIAL: Gold, Rated 0.4VA @ 28V AC/DC 6 TERMINALS: Straight with Bracket Right Angle ELECTRICAL CAPACITY (Resistive Load) » Logic Level: 0.4VA @ 28 V AC/DC max. OTHER RATINGS: » Contact Resistance: 100mΩ max. » Insulation Resistance: 100MΩ min.@500VDC » Mechanical Life: 30,000 cycles min. » Electrical Life: 20,000 cycles min. » Norminal Operating Torque: 0.0002Nm » Contact Timing: Break-before-make » Angle of Throw: 45° for 3-position & 5-position MATERIALS » Terminals: Phosphor bronze with tin plating » Movable Contactor: Beryllium copper with gold plating » Stationary Contacts: Phosphor bronze with tin plating ENVIRONMENTAL DATA » Operating Temperature: -25°C through +70°C SOLDERING » Wave Soldering recommended. Manual Soldering 4 sec. max. @ 390°C max. www.greatecs.com