RoHS PC35 Power Chip Inductors Dimensions: 0.453 MAX. (11.48) 0.078±0.012 (1.98±0.30) 0.197±0.02 (5.00±0.51) Inches (mm) 0.275±0.019 (6.99±0.48) 0.307±0.012 (7.80±0.30) 0.118±0.008 (3.00±0.20) Allied Part Number Inductance (µh) Tolerance (%) Test Freq. (MHz) DCR Max. (Ω) *Rated Current (A) PC35-3R0M-RC 3.0 20 100 0.02 5.00 PC35-100K-RC 10 10 2.52 0.07 2.30 PC35-120K-RC 12 10 2.52 0.08 2.00 PC35-150K-RC 15 10 2.52 0.09 1.80 PC35-180K-RC 18 10 2.52 0.10 1.60 PC35-220K-RC 22 10 2.52 0.11 1.50 PC35-270K-RC 27 10 2.52 0.12 1.30 PC35-330K-RC 33 10 2.52 0.13 1.20 PC35-390K-RC 39 10 2.52 0.16 1.10 PC35-470K-RC 47 10 2.52 0.18 1.10 PC35-560K-RC 56 10 2.52 0.24 0.94 PC35-680K-RC 68 10 2.52 0.28 0.85 PC35-820K-RC 82 10 2.52 0.37 0.78 PC35-101K-RC 100 10 1KHz 0.43 0.72 PC35-121K-RC 120 10 1KHz 0.47 0.66 PC35-151K-RC 150 10 1KHz 0.64 0.58 PC35-181K-RC 180 10 1KHz 0.71 0.51 PC35-221K-RC 220 10 1KHz 0.96 0.49 PC35-271K-RC 270 10 1KHz 1.11 0.42 PC35-331K-RC 330 10 1KHz 1.26 0.40 PC35-391K-RC 390 10 1KHz 1.77 0.36 PC35-471K-RC 470 10 1KHz 1.96 0.34 Features • Small size allows for high mounting density • Suitable for Reflow Solder • Large DC current capability with low DC resistance • Embossed carrier tape available • Polarity identification available • Custom inductances available Characteristics Operating Temp.: -30° to +100° C. External Appearance: Clean & no external defects by visual inspection Terminal Strength: After soldering, push the coils will withstand the followings without falling off. 20.0N 20 sec. Heat Endurance: Heat at 150°C for 3 minutes; then 200°C for 25 seconds. No mechanical or electrical defect after that when back at room temperature. Insulation: Over 100M ohm at 100 VDC (coil and core). Dielectric: 100VDC for one minute (coil and core). Temperature Characteristics: (0 to 2000) x 10 -6°C. Environmental Humidity: Deviate +/-5%, after 96 hours in 90-95% relative humidity at 40°C and 1 hour of drying. Vibration: Deviate +/-5%, vibration of 1 hour, three direction; 10-55-10 Hz; 1.5mm p-p amplitude. Shock: Deviate 5% after drop down 100G shock attitude of one time in each direction. Physical Packaging: 800 per 13 inch reel. *Inductance drop no more than 10% at rated current applied or temperature rise ∆T = 40° C. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 15 www.alliedcomponents.com