Multilayer Ceramic Dipped Axial and Radial Capacitors

VISHAY I N T E R T E C H N O L O G Y , I N C .
INTERACTIVE
data book
mlcc dipped a xial and radial
vishay
vse-db0074-0911
Notes:
1.
To navigate:
a) Click on the Vishay logo on any datasheet to go to the Contents page for that section. Click on the Vishay logo on any Contents
page to go to the main Table of Contents page.
b) Click on the products within the Table of Contents to go directly
to the datasheet.
c) Use the scroll or page up/page down functions.
d) Use the Adobe ® Acrobat ® page function in the browser bar.
2.
To search the text of the catalog use the Adobe ® Acrobat ® search function.
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
V I S H AY I N T E R T E C H N O L O G Y, I N C .
DATA B O O K
MLCC DIPPED A XIAL AND RADIAL
Mono-Axial
Mono-Radial
w w w. v i s h a y. c o m
SEMICONDUCTORS
Rectifiers
Schottky (single, dual)
Standard, Fast, and Ultra-Fast Recovery
(single, dual)
Bridge
Superectifier ®
Sinterglass Avalanche Diodes
High-Power Diodes and Thyristors
High-Power Fast-Recovery Diodes
Phase-Control Thyristors
Fast Thyristors
P rod u ct L istings
Small-Signal Diodes
Schottky and Switching (single, dual)
Tuner/Capacitance (single, dual)
Bandswitching
PIN
Optoelectronics
IR Emitters and Detectors,
and IR Receiver Modules
Optocouplers and Solid-State Relays
Optical Sensors
LEDs and 7-Segment Displays
Infrared Data Transceiver Modules
Custom Products
ICs
Power ICs
Analog Switches
Modules
Power Modules (contain power diodes,
thyristors, MOSFETs, IGBTs)
Zener and Suppressor Diodes
Zener (single, dual)
TVS (TRANSZORB®, Automotive, ESD, Arrays)
FETs
Low-Voltage TrenchFET® Power MOSFETs
High-Voltage TrenchFET® Power MOSFETs
High-Voltage Planar MOSFETs
JFETs
Passive Components
Resistive Products
Film Resistors
Metal Film Resistors
Thin Film Resistors
Thick Film Resistors
Metal Oxide Film Resistors
Carbon Film Resistors
Wirewound Resistors
Power Metal Strip® Resistors
Chip Fuses
Variable Resistors
Cermet Variable Resistors
Wirewound Variable Resistors
Conductive Plastic Variable Resistors
Networks/Arrays
Non-Linear Resistors
NTC Thermistors
PTC Thermistors
Varistors
Magnetics
Inductors
Transformers
Capacitors
Tantalum Capacitors
Molded Chip Tantalum Capacitors
Coated Chip Tantalum Capacitors
Solid Through-Hole Tantalum Capacitors
Wet Tantalum Capacitors
Ceramic Capacitors
Multilayer Chip Capacitors
Disc Capacitors
Film Capacitors
Power Capacitors
Heavy-Current Capacitors
Aluminum Capacitors
Multilayer Ceramic
Dipped Axial and Radial Capacitors
50 VDC, 100 VDC, 200 VDC
and 500 VDC
Vishay Electronic GmbH
Geheimrat-Rosenthal-Strasse 100
D-95100 Selb
Germany
Phone: +49 9287 710
Fax: +49 9287 70435
www.vishay.com
DISCLAIMER
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Table of Contents
Vishay
Multilayer Ceramic Dipped Axial and Radial Capacitors
MONO-AXIAL CAPACITORS
Construction and Lead Configuration 50 VDC, 100 VDC, 200 VDC and 500 VDC .....................................................................
4
Electrical Data and Dielectric Characteristics 50 VDC and 100 VDC ........................................................................................
5
Electrical Data and Dielectric Characteristics 200 VDC and 500 VDC ...................................................................................... 10
Dimensions and Marking 50 VDC, 100 VDC, 200 VDC and 500 VDC ........................................................................................ 14
Taping and Packaging 50 VDC, 100 VDC, 200 VDC and 500 VDC ............................................................................................ 16
General Information 50 VDC, 100 VDC, 200 VDC and 500 VDC ................................................................................................ 18
Mono-Axial 50 VDC and 100 VDC ............................................................................................................................................. 21
Mono-Axial 200 VDC and 500 VDC ........................................................................................................................................... 30
MONO-KAP RADIAL CAPACITORS
Construction and Lead Configuration 50 VDC, 100 VDC, 200 VDC and 500 VDC ..................................................................... 38
Electrical Data and Dielectric Characteristics 50 VDC and 100 VDC ........................................................................................ 39
Electrical Data and Dielectric Characteristics 200 VDC and 500 VDC ...................................................................................... 44
Dimensions and Marking 50 VDC, 100 VDC, 200 VDC and 500 VDC ........................................................................................ 48
Taping and Packaging 50 VDC, 100 VDC, 200 VDC and 500 VDC ............................................................................................ 50
General Information 50 VDC, 100 VDC, 200 VDC and 500 VDC ................................................................................................ 52
Mono-Kap 50 VDC and 100 VDC .............................................................................................................................................. 55
Mono-Kap 200 VDC and 500 VDC ............................................................................................................................................ 67
Ordering Information ............................................................................................................................................................... 75
Cross Reference - Vishay Sprague vs. Vishay BCcomponents Part Number ........................................................................ 76
RADIAL K10 CAPACITORS
Construction and Lead Configuration ...................................................................................................................................... 82
Electrical Data and Dielectric Characteristics ......................................................................................................................... 83
Dimensions and Marking ......................................................................................................................................................... 88
Taping and Packaging ............................................................................................................................................................ 90
General Information ................................................................................................................................................................ 92
Mono-Kap ................................................................................................................................................................................ 95
Ordering Information ............................................................................................................................................................... 103
Revision: 25-Sep-09
www.vishay.com
1
Vishay
www.vishay.com
2
Contents
Construction and Lead
Configuration 50 VDC, 100 VDC,
200 VDC and 500 VDC ............. 4
Multilayer
Ceramic
Dipped Axial
Capacitors
Electrical Data and
Dielectric Characteristics
50 VDC and 100 VDC ...............
5
Electrical Data and
Dielectric Characteristics
200 VDC and 500 VDC ............. 10
Dimensions and Marking
50 VDC, 100 VDC, 200 VDC
and 500 VDC ........................... 14
Taping and Packaging
50 VDC, 100 VDC, 200 VDC
and 500 VDC ........................... 16
General Information
50 VDC, 100 VDC, 200 VDC
and 500 VDC ........................... 18
Mono-Axial
50 VDC and 100 VDC ............... 21
Mono-Axial
200 VDC and 500 VDC ............. 30
Construction and Lead Configuration
Vishay
Multilayer Ceramic Dipped Axial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
INTERNAL CONSTRUCTION
Multilayer ceramic capacitors consist of electrodes, the
interleaved ceramic dielectric and the external terminal
connectors. The capacitance is given by the description:
A x n x ε0 x εr
C = ------------------------------------d
Termination
A = Electrode area
n = Number of active layers
Electrodes
d = Distance between electrodes
Dielectric
(Ceramic)
εr = Dielectric relative
ε0 = Dielectric constant
Whilst the values “A x n” and “d” are respectively determined
by the production process, the dielectric constant is a
function of the ceramic material used.
LEAD CONFIGURATION
Axial Size 15 and Size 20
Base material: FeCu
Plating: Electrolytic, tinned
D
Lb
52.4 ± 1.5
(2.062 ± 0.59)
CAPACITOR DIMENSIONS AND WEIGHT in millimeters (inches)
SIZE
Lbmax.
Ø Dmax.
WEIGHT
(g)
15
3.8
(0.150)
2.5
(0.100)
0.14
20
5.0
(0.200)
3.0
(0.120)
0.15
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 45154
Revision: 17-Jan-06
Electrical Data and Dielectric Characteristics
Vishay
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
DIELECTRIC CHARACTERISTICS
DIELECTRIC ACCORDING TO EIA
According to CECC
C0G (NP0)
X7R
Y5V
CG
C1 (2C1)
2F4
Capacitance Range:
at 1 MHz, 1 V; where C ≤ 1000 pF
10 pF to 1000 pF
-
-
at 1 kHz, 1 V; where C > 1000 pF
1200 pF to 5600 pF
100 pF to 1.0 µF
0.1 µF to 1.0 µF
Tolerance on the Capacitance:
where C < 10 pF
± 0.5 pF (D)
-
-
where C > 10 pF
± 5 % (J); ± 10 % (K)
± 10 % (K); ± 20 % (M)
+ 80 %/- 20 % (Z)
Rated DC Voltage
50 V; 100 V
Dielectric Strength
250 % of rated voltage
100 000 MΩ or 1000 MΩ x µF
whichever is less at rated voltage
within 2 minutes of charging
Insulation Resistance (IR)
10 000 MΩ or
1000 MΩ x µF
whichever is less at rated
voltage within 2 minutes of
charging
0 x 10-6/K
-
-
± 30 x 10-6/K
-
-
-
± 15 %
+ 22 %/- 82 %
at 1 MHz, 1 V; where C ≤ 1000 pF
1
---------------------------------400 + 20 x C
-
-
at 1 kHz, 1 V; where C > 1000 pF
≤ 0.1 %
≤ 2.5 %
≤5%
Temperature Coefficient of the Capacitance
Tolerance of the Temperature Coefficient
Maximum Capacitance change with respect to
Capacitance at 25 °C
Dissipation Factor (DF)
Operating Temperature Range
- 55 °C to + 125 °C
Storage Temperature Range
- 30 °C to + 85 °C
25 °C ± 15 °C
Aging
-
typical 1 % per time decade typical 7 % per time decade
Note
• The capacitors meet the essential requirements of ‘EIA 198’.
Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at barometric pressures 650 mm to 800 mm of
mercury, and relative humidity not to exceed 75 %.
MAIN FEATURES
CLASS 1
CLASS 2
CLASS 3
APPLICATION
For temperature compensation of frequency
discriminating circuits and filters, coupling and
decoupling in high frequency circuits where
low losses and narrow capacitance tolerances
are demanded.
As coupling and decoupling
capacitors for such application
where higher losses and a
reduced capacitance stability
are tolerated.
As coupling and decoupling
capacitors for such application
where higher losses and a
reduced capacitance stability
are tolerated.
PROPERTIES
Temperature
Dependence
Capacitance
High stability of capacitance. Low dissipation
factor up to higher frequencies. Defined
temperature coefficient of capacitance,
positive or negative, linear and reversible.
High insulation resistance. No voltage
dependence. High long-term stability of
electrical values.
High capacitance values with
small dimensions.
Non-linear dependence of
capacitance on temperature.
High capacitance values with
small dimensions.
Non-linear dependence of
capacitance on temperature.
C0G (NP0)
X7R
Y5V
CG
2C1
2F4
CLASSIFICATION
Classification EIA:
Classification CECC:
Document Number: 45156
Revision: 24-Feb-06
For technical questions, contact: [email protected]
www.vishay.com
5
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
Vishay
TEMPERATURE CHARACTERISTICS OF CAPACITANCE FOR CLASS 2/3 CERAMIC DIELECTRICS
ACCORDING TO CECC 32100
CODE LETTER FOR
SUB CATEGORY
MAXIMUM CAPACITANCE CHANGE IN % AT
THE SPECIFIED TEMPERATURE RANGE
DESIGNATION OF THE SPECIFIED TEMPERATURE RANGE
- 55 °C/+ 125 °C
- 30 °C/+ 85 °C
4
WITHOUT RATED
VOLTAGE
WITH RATED
VOLTAGE
1
2C
± 20 %
+ 20 %/- 30 %
X
2F
+ 30 %/- 80 %
+ 30 %/- 90 %
X
EIA - CODING SYSTEM FOR CLASS 2/3 CERAMIC
A
TYPE
X
7
WORKING TEMPERATURE RANGE
LOWER TEMP.
LIMIT
UPPER TEMP.
LIMIT
X = - 55 °C
Y = - 30 °C
7 = + 125 °C
5 = + 85 °C
R
103
M
CAPACITANCE CHANGE WITHIN
WORKING TEMP. RANGE
NO RATED VOLTAGE APPLIED
CAPACITANCE
IN pF
TOLERANCE
R = ± 15 %
V = - 82 %/+ 22 %
The first two digits
gives the nominal
value, the third digit
indicates the number
of zeros, e.g.
103 = 10 000 pF
For values below
10 pF an R is
inserted in the
second position
instead of a decimal
point e.g.
2R2 = 2.2 pF
D = ± 0.50 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Z =+ 80 %/- 20 %
Example: Vishay BCcomponents Description
EIA Description
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 45156
Revision: 24-Feb-06
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
Vishay
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - NP0
TEMPERATURE COEFFICIENT OF CAPACITANCE
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
2.0
1.5
1.0
0.5
0.0
- 0.5
NP0
- 1.0
- 1.5
0.2
0.1
0.0
- 0.1
- 0.2
- 2.0
- 100 - 75 - 50 - 25
0
25
50
75
0
100 125 150
10
20
TEMPERATURE (°C)
40
50
60
70
80
90
100
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
AGING RATE - NP0
10 000
ΔC CAPACITANCE CHANGE (%)
C
INSULATION RESISTANCE (ΩF)
30
1000
100
0.2
0.1
0.0
- 0.1
10
10
25
100 125
- 0.2
1
TEMPERATURE (°C)
Document Number: 45156
Revision: 24-Feb-06
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
www.vishay.com
7
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
Vishay
X7R DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - X7R
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITANCE
15
10
5
0
X7R
-5
- 10
- 15
5
0
-5
- 10
- 15
50 V
RATED
- 20
100 V
RATED
- 25
- 30
- 20
- 100 - 75 - 50 - 25
0
25
50
0
100 125 150
75
10
20
30
TEMPERATURE (°C)
40
50
60
70
80
90
100
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
INSULATION RESISTANCE (ΩF)
10 000
1000
100
10
10
25
100 125
TEMPERATURE (°C)
X7R
2.0
1.5
1.0
0.5
0.0
- 75
- 50 - 25
0
25
50
AGING RATE - X7R
ΔC CAPACITANCE CHANGE (%)
C
DISSIPATION
DISSIPATION FACTOR VS. TEMPERATURE
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
75
100
125
1.0
0.0
- 1.0
- 2.0
- 3.0
- 4.0
1
TEMPERATURE (°C)
www.vishay.com
8
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
Document Number: 45156
Revision: 24-Feb-06
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
Vishay
Y5V DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - Y5V
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITOR
60
40
20
Y5V
0
- 20
- 40
- 60
- 80
- 100
- 50
40
20
0
- 20
100 V
RATED
- 40
- 60
50 V
RATED
- 80
- 100
- 25
0
25
50
75
0
100
10
20
30
40
50
60
70
80
90
100
VDC APPLIED
TEMPERATURE (°C)
INSULATION RESISTANCE (ΩF)
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
100 000
10 000
1000
- 50
- 25
0
25
50
75
100
TEMPERATURE (°C)
DISSIPATION FACTOR VS. TEMPERATURE
AGING RATE - Y5V
20
ΔC CAPACITANCE CHANGE (%)
C
2
DISSIPATION
16
12
8
4
0
- 50
- 25
0
25
50
75
100
0
-2
-4
-6
-8
- 10
- 12
- 14
1
TEMPERATURE (°C)
Document Number: 45156
Revision: 24-Feb-06
For technical questions, contact: [email protected]
10
100
1000
TIME (h)
www.vishay.com
9
Electrical Data and Dielectric Characteristics
Vishay
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
DIELECTRIC CHARACTERISTICS
DIELECTRIC ACCORDING TO EIA
According to CECC
C0G (NP0)
X7R
CG
C1 (2C1)
Capacitance Range:
at 1 MHz, 1 V; where C ≤ 1000 pF
33 pF to 1000 pF
-
at 1 kHz, 1 V; where C > 1000 pF
1200 pF to 2200 pF
100 pF to 0.047 µF
Tolerance on the Capacitance:
where C < 10 pF
-
-
where C > 10 pF
± 5 % (J); ± 10 % (K)
± 10 % (K); ± 20 % (M)
Rated DC Voltage
200 V; 500 V
200 V at 150 % of Vrated + 100 VDC
Dielectric Strength
500 V at 130 % of Vrated + 100 VDC
C < 0.01 µF: 10 000 MΩ min.
C ≥ 0.01 µF: 100 MΩ x µF min.
Insulation Resistance (IR)
0 x 10-6/K
-
± 30 x 10-6/K
-
-
± 15 %
at 1 MHz, 1 V; where C ≤ 1000 pF
1
---------------------------------400 + 20 x C
-
at 1 kHz, 1 V; where C > 1000 pF
≤ 0.1 %
Temperature Coefficient of the Capacitance
Tolerance of the Temperature Coefficient
Maximum Capacitance change with respect to
Capacitance at 25 °C
Dissipation Factor (DF)
Operating Temperature Range
≤ 2.5 %
- 55 °C to + 125 °C
Storage Temperature Range
25 °C ± 15 °C
Aging
-
typical 1 % per time decade
Note
• The capacitors meet the essential requirements of ‘EIA 198’.
Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at barometric pressures 650 mm to 800 mm of
mercury, and relative humidity not to exceed 75 %.
MAIN FEATURES
CLASS 1
CLASS 2
APPLICATION
For temperature compensation of frequency
discriminating circuits and filters, coupling and
decoupling in high frequency circuits where low
losses and narrow capacitance tolerances are
demanded.
PROPERTIES
Temperature
Dependence
Capacitance
High stability of capacitance. Low dissipation
factor up to higher frequencies. Defined
temperature coefficient of capacitance, positive or
negative, linear and reversible. High insulation
resistance. No voltage dependence. High longterm stability of electrical values.
High capacitance values with small dimensions.
Non-linear dependence of capacitance on
temperature.
C0G (NP0)
X7R
CG
2C1
As coupling and decoupling capacitors for such
application where higher losses and a reduced
capacitance stability are tolerated.
CLASSIFICATION
Classification EIA:
Classification CECC:
www.vishay.com
10
For technical questions, contact: [email protected]
Document Number: 45169
Revision: 25-Jun-07
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
Vishay
TEMPERATURE CHARACTERISTICS OF CAPACITANCE FOR CLASS 2/3 CERAMIC DIELECTRICS
ACCORDING TO CECC 32100
CODE LETTER FOR
SUB CATEGORY
DESIGNATION OF THE SPECIFIED
TEMPERATURE RANGE
MAXIMUM CAPACITANCE CHANGE IN % AT THE
SPECIFIED TEMPERATURE RANGE
- 55 °C/+ 125 °C
WITHOUT RATED
VOLTAGE
WITH RATED
VOLTAGE
1
± 20 %
+ 20 %/- 30 %
X
2C
EIA - CODING SYSTEM FOR CLASS 2 CERAMIC
A
TYPE
X
7
WORKING TEMPERATURE RANGE
LOWER TEMP.
LIMIT
UPPER TEMP.
LIMIT
X = - 55 °C
7 = + 125 °C
R
103
M
CAPACITANCE CHANGE WITHIN
WORKING TEMP. RANGE
NO RATED VOLTAGE APPLIED
CAPACITANCE
IN pF
TOLERANCE
R = ± 15 %
The first two digits
gives the nominal
value, the third digit
indicates the number
of zeros, e.g. 103 =
10 000 pF
J=±5%
K = ± 10 %
M = ± 20 %
Example: Vishay BCcomponents Description
EIA Description
Document Number: 45169
Revision: 25-Jun-07
For technical questions, contact: [email protected]
www.vishay.com
11
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
Vishay
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - NP0
0.2
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITANCE
2.0
1.5
1.0
0.5
0.0
- 0.5
NP0
0
- 1.5
- 2.0
- 100 - 75 - 50 - 25
0
25
50
75
0.1
0.0
- 0.1
- 0.2
100 125 150
0
10
20
30
TEMPERATURE (°C)
ΔC CAPACITANCE CHANGE (%)
C
INSULATION RESISTANCE (ΩF)
1000
100
10
70
80
90
100
100 125
0.2
0.1
0.0
1
- 0.2
1
TEMPERATURE (°C)
www.vishay.com
12
60
AGING RATE - NP0
10 000
25
50
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
10
40
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
Document Number: 45169
Revision: 25-Jun-07
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
Vishay
X7R DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - X7R
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITANCE
15
10
5
0
X7R
-5
- 10
- 15
- 20
- 100 - 75 - 50 - 25
0
25
50
10
0
- 10
- 20
- 30
500 V
RATED
- 50
- 60
0
100 125 150
75
200 V
RATED
- 40
100
200
TEMPERATURE (°C)
300
400
500
600
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
INSULATION RESISTANCE (ΩF)
10 000
1000
100
10
10
25
100 125
TEMPERATURE (°C)
AGING RATE - X7R
ΔC CAPACITANCE CHANGE (%)
C
DISSIPATION
DISSIPATION FACTOR VS. TEMPERATURE
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
X7R
2.0
1.5
1.0
0.5
0.0
1.0
0.0
- 1.0
- 2.0
- 3.0
- 4.0
- 75
- 50 - 25
0
25
50
75
100
125
1
TEMPERATURE (°C)
Document Number: 45169
Revision: 25-Jun-07
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
www.vishay.com
13
Dimensions and Marking
Vishay
Multilayer Ceramic Dipped Axial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
DIMENSIONS
5 mm or
6.35 mm wide
carrier tape
Lb
Ø 0.5
ØD
52.4 ± 1.5
CAPACITOR DIMENSIONS AND WEIGHT in millimeter (inches)
SIZE
Lbmax.
Ø Dmax.
WEIGHT
(g)
15
3.8
(0.150)
2.5
(0.100)
≈ 0.14
20
5.0
(0.200)
3.0
(0.120)
≈ 0.15
MARKING
Data Code (DDD):
Three-digit code; first digit denotes year, last two denote
week of manufacture.
941 = 1999, week 41
Capacitance Value (CCC):
10 pF to 100 pF; actual value in pF
(2 digits only)
100 pF and above; coded capacitance value
(same as used in P/N)
Capacitance Tolerance (T):
Standard EIA tolerance
(same as used in P/N)
CCCT
M V
DDD
Material Code (M)
A = C0G
C = X7R
Y = Y5V
Voltage Code (V):
1 = 100 V
2 = 200 V
4 = 500 V
5 = 50 V
www.vishay.com
14
For technical questions, contact: [email protected]
Document Number: 45160
Revision: 17-Jan-06
Dimensions and Marking
Multilayer Ceramic Dipped Axial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
Vishay
MARKING CODE DESCRIPTION
DDD
XXX
t
V
T
DATE CODE
CAPACITANCE CODE
TOLERANCE
CODE
VOLTAGE
CODE
T.C.
CODE
The first digit is the year, the
last two digits are the week
309 = 2003, 9th week
317 = 2003, 17th week
Two significant digits followed by one digit for
the multiplier as given below.
0=x1
2 = x 100
4 = x 10 000
1 = x 10
3 = x 1000
5 = x 100 000
J=±5%
K = ± 10 %
M = ± 20 %
Z = + 80 %/- 20 %
1 = 100 V
2 = 200 V
4 = 500 V
5 = 50 V
A = C0G (NP0)
C = X7R
Y = Y5V
9 = x 0.1
CAPACITANCE VALUE < 100 pF:
Side Two
Side One
X X t
T V
DDD
XX: Capacitance Code
Logo Mark
t: Tolerance Code
DDD: Date Code
V: Voltage Code
T: T.C. Code
For Example:
8 2 J
A
815
5
Logo Mark
815: 1998,15th week
82: 82 pF
J: ± 5 %
5: 50 V
A: NP0
CAPACITANCE VALUE ≥ 100 pF:
Side One
Side Two
X X X
t T V
DDD
Logo Mark
XXX: Capacitance Code
V: Voltage Code
T: T.C. Code
DDD: Date Code
t: Tolerance Code
For Example:
104
M C 1
839
Logo Mark
839: 1998, 39th week
104: 100 000 pF
1: 100 V
C: X7R
M: ± 20 %
Note
• Vishay or BCcomponents logo can be marked on the products body
Document Number: 45160
Revision: 17-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
15
Taping and Packaging
Vishay
Multilayer Ceramic Dipped Axial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
REEL DATA
REEL
A maximum of 0.5 % of the total number of capacitors per
reel may be missing.
69.85 ± 1.5
A maximum of 1 consecutive vacant positions is followed by
6 consecutive components.
355.6
Max.
Tape begins and ends with a minimum of 4 empty positions
(180 mm tape).
Maximum of 5 splicers per reel.
AMMOPACK DATA
direction
of
unreeling
A maximum of 0.5 % of the total number of capacitors per
box may be missing.
arbor hole
Ø 28 ± 1.5
A maximum of 2 consecutive vacant positions is followed by
6 consecutive components.
Tape begins and ends with a minimum of 4 empty positions
(180 mm tape).
REEL DIMENSIONS
Maximum of 5 splicers per reel.
The cumulative pitch tolerance over 20 consecutive units is
not to exceed ± 1.0 mm.
Lead space (F) shall be measured at (3.6 ± 0.5) mm from the
capacitor seating plane.
L
LABELLING
K
A
Each reel is provided with a label showing the following
details:
Manufacturer, A style, capacitance, tolerance, batch
number, quantity of components, rated voltage, dielectric.
On special request other designations can be shown.
For example:
H1
REEL SIZE
A
(mm)
Outer Dia.
355.6
L
Hole Dia.
28 ± 1.5
K
Core Dia.
90
H1
Internal Width
69.85 ± 1.5
AMMOPACK
w = 85
T = 95
L = 265
www.vishay.com
16
For technical questions, contact: [email protected]
Document Number: 45162
Revision: 08-Feb-06
Taping and Packaging
Multilayer Ceramic Dipped Axial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
Vishay
PACKAGING QUANTITIES AND BOX DIMENSIONS
PACKAGING
SIZE CODE
SMALLEST PACKAGING
QUANTITY (SPQ)
BOX DIMENSIONS
LxWxH
(mm)
Tape on reel
15; 20
7000
370 x 370 x 90
Ammopack
15; 20
4000
265 x 85 x 95
CAPACITORS ON BANDOLIER
A
P
C
H
S
M
B
PARAMETER
T
SYMBOL
B (1)
Inside tape spacing
DIMENSIONS
mm
inch
52.4 ± 1.5
2.062 ± 0.059
Centre to tape spacing
C
± 0.8
± 0.031
Cumulative pitch, 6 consecutive components
P
± 1.5
± 0.059
Components pitch
A
5 ± 0.5
0.197 ± 0.015
Lead bend
M
< 1.2
< 0.047
Exposed adhesive
S
< 0.51
< 0.020
Tape width
T
6.35
0.250
Lead sandwich
H
> 3.96
> 0.156
Note
(1) Inside tape spacing 26.0 + 1.51/- 0.0 is available on request
Document Number: 45162
Revision: 08-Feb-06
For technical questions, contact: [email protected]
www.vishay.com
17
General Information
Vishay
Multilayer Ceramic Dipped Axial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
STORAGE
The capacitors must not be stored in a corrosive atmosphere where sulfide or chloride gas, acid, alkali, or salt are present.
Moisture exposure should also be avoided.
The solderability of the leads is not affected by storage of up to 24 months. Temperature + 10 °C to + 35 °C, relative humidity up
to 60 %.
With reference to class 2 ceramic dielectric capacitors, see the last page of this general information.
SOLDERING
SOLDERING SPECIFICATIONS
Soldering test for capacitors with wire leads: (According to IEC 60068-2-20, solder bath method)
Soldering temperature
Soldering duration
Distance from component body
SOLDERABILITY
RESISTANCE TO SOLDERING HEAT
235 °C ± 5 °C
260 °C ± 5 °C
2 s ± 0.5 s
10 s ± 1 s
≥ 2 mm
≥ 5 mm
SOLDERING RECOMMENDATIONS
Soldering of the component should be achieved using a Sn96.5/Ag3.0/Cu0.5, a Sn60/40 type or a silver-bearing type solder.
As ceramic capacitors are very sensitive to rapid changes in temperature (thermal shock), the solder heat resistance specification
(see above table) should not be exceeded.
Subjecting the capacitor to excessive heat may result in thermal shocks that can crack the ceramic body and melt the internal
solder junction.
CLEANING
The components should be cleaned with vapor degreasers immediately following the soldering operation.
SOLVENT RESISTANCE AND FLAME ABILITY
The coating and marking of the capacitors are resistant to the following test method: IEC 60068-2-45 (Method XA). The epoxy
material is approved according to UL 94 V-0.
MOUNTING
We do not recommend modifying the lead terminals, e.g. bending or cropping as this action could break the coating or crack the
ceramic insert. However, if the lead must be modified in such a way, we recommend supporting the lead with a clamping fixture
next to the coating.
www.vishay.com
18
For technical questions, contact: [email protected]
Document Number: 45163
Revision: 26-Sep-07
General Information
Multilayer Ceramic Dipped Axial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
Vishay
CAPACITANCE “AGING” OF CERAMIC CAPACITORS
Following the final heat treatment, all class 2 ceramic capacitors reduce their capacitance value. According to logarithmic law,
this is due to their special crystalline construction. This change is called “aging”. If the capacitors are heat treated (for example
when soldering), the capacitance increases again to a higher value deaging, and the aging process begins again.
Note
• The level of this deaging is dependent on the temperature and the duration of the heat; an almost complete deaging is achieved at 150 °C in
one hour. These conditions also form the basis for reference measurements when testing. The capacitance change per time decade (aging
constant) differs for the various types of ceramic, but typical values can be taken from the equations below.
100 x ( C 11 - C 12 )
k = ---------------------------------------------C 11 x log 10 ( t 2 /t 1 )
t1, t2 = measuring time point (h)
C11, C12 = capacitance values for the times t1, t2
C 12 = C 11 x ( 1 - k/100 x log 10 ( t 2 /t 1 ) )
k = aging constant (%)
REFERENCE MEASUREMENT
Due to aging, it is necessary to quote an age for reference measurements which can be related to the capacitance with fixed
tolerance. According to EN 130700, this time period is 1000 h.
If the shelf-life of the capacitor is known, the capacitance for t = 1000 h can be calculated with the aging constant.
In order to avoid the influence of aging, it is important to deage the capacitors before stress-testing. The following procedure is
adopted (see also EN 130700):
• Deaging at 125 °C, 1 h
• Storage for 24 h at normal climate temperature
• Initial measurement
• Stress
• Deaging at 125 °C, 1 h
• Storage for 24 h at normal climate temperature
• Final measurement
Document Number: 45163
Revision: 26-Sep-07
For technical questions, contact: [email protected]
www.vishay.com
19
General Information
Multilayer Ceramic Dipped Axial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
Vishay
CAUTION
1. OPERATING VOLTAGE AND FREQUENCY CHARACTERISTIC
When sinusiodal or ripple voltage applied to DC Ceramic Disc Capacitors, be sure to maintain the peak-to-peak value or the peak
value of the sum of both AC + DC within the rated voltage.
When start or stop applying the voltage, resonance may generate irregular voltage.
When rectangular or Pulse Wave Voltage is applied to DC Ceramic Disc Capacitors, the self-heating generated by the capacitor
is higher than the sinusoidal application with the same frequency. The allowable voltage rating for the rectangular or pulse wave
corresponds approximately with the allowable voltage of a sinusoidal wave with the double fundamental frequency.
The allowable voltage varies, depending on the voltage and the waveform.
Diagrams of the limiting values are available for each capacitor series on request.
VOLTAGE
Waveform
Figure
DC
V0-p
DC + AC
Vp-p
V0-p
0
AC
0
0
2. OPERATING TEMPERATURE AND SELF-GENERATED HEAT
The surface temperature of the capacitors must not exceed the upper limit of its Rated Operating Temperature.
During operation in a high-frequency circuit or a pulse signal circuit, the capacitor itself generates heat due to dielectric losses.
Applied voltage should be the load such as self-generated heat is within 20 °C on the condition of environmental temperature
25 °C.
Note, that excessive heat may lead to deterioration of the capacitor’s characteristics.
www.vishay.com
20
For technical questions, contact: [email protected]
Document Number: 45163
Revision: 26-Sep-07
Mono-Axial
Vishay
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
DIMENSIONS
5 mm or
6.35 mm wide
carrier tape
Lb
Ø 0.5
ØD
52.4 ± 1.5
CAPACITOR DIMENSIONS AND WEIGHT in millimeters (inches)
Lbmax.
Ø Dmax.
WEIGHT
(g)
15
3.8 (0.150)
2.5 (0.100)
≈ 0.14
20
5.0 (0.200)
3.0 (0.120)
≈ 0.15
SIZE
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Capacitance range
10 pF to 5600 pF
Rated DC voltage
50 V
Tolerance on capacitance
100 pF to 1.0 µF
100 V
50 V
0.1 µF to 1.0 µF
100 V
50 V
100 V
± 5 %, ± 10 %
± 10 %, ± 20 %
+ 80 %/- 20 %
C0G (NP0)
X7R
Y5V
Dielectric Code
ORDERING INFORMATION
A
103
K
15
X7R
F
5
TAA
PRODUCT
TYPE
CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
SIZE CODE
TEMP.
CHAR.
RATED
VOLTAGE
LEAD
DIAMETER
PACKAGING
A = Mono-Axial
Two significant
digits followed by
the number of
zeros.
For example:
473 = 47 000 pF
J=±5%
K = ± 10 %
M = ± 20 %
Z = + 80%/- 20 %
C0G
X7R
Y5V
F = 50 VDC
H = 100 VDC
5 = 0.5 mm (0.20")
15 = 3.8 (0.15") max.
20 = 5.0 (0.20") max.
TAA = T and R
UAA = AMMO
Ordering Example: A-103-K-15-X7R-F-5-TAA
Document Number: 45164
Revision: 17-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
21
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
Vishay
CAPACITANCE RANGE CHART
C0G (NP0) DIELECTRIC
SIZE
RATED VOLTAGE
VALUE
CODE
10 pF
100
12 pF
120
15 pF
150
18 pF
180
22 pF
220
27 pF
270
33 pF
330
39 pF
390
47 pF
470
56 pF
560
68 pF
680
82 pF
820
100 pF
101
120 pF
121
150 pF
151
180 pF
181
220 pF
221
270 pF
271
330 pF
331
390 pF
391
470 pF
471
560 pF
561
680 pF
681
820 pF
821
1000 pF
102
1200 pF
122
1500 pF
152
1800 pF
182
2200 pF
222
2700 pF
272
3300 pF
332
3900 pF
392
4700 pF
472
5600 pF
562
X7R DIELECTRIC
15
20
50
100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
100
•
•
•
•
•
•
•
•
•
•
•
•
Y5V DIELECTRIC
SIZE
RATED VOLTAGE
VALUE
CODE
0.01 µF
103
0.015 µF
153
0.022 µF
223
0.033 µF
333
0.047 µF
473
0.068 µF
683
0.10 µF
104
0.15 µF
154
0.22 µF
224
0.33 µF
334
0.47 µF
474
0.68 µF
684
1.0 µF
105
www.vishay.com
22
15
20
50
100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
100
SIZE
RATED VOLTAGE
VALUE
CODE
100 pF
101
120 pF
121
150 pF
151
180 pF
181
220 pF
221
270 pF
271
330 pF
331
390 pF
391
470 pF
471
560 pF
561
680 pF
681
820 pF
821
1000 pF
102
1200 pF
122
1500 pF
152
1800 pF
182
2200 pF
222
2700 pF
272
3300 pF
332
3900 pF
392
4700 pF
472
5600 pF
562
6800 pF
682
8200 pF
822
0.01 µF
103
0.012 µF
123
0.015 µF
153
0.018 µF
183
0.022 µF
223
0.027 µF
273
0.033 µF
333
0.039 µF
393
0.047 µF
473
0.056 µF
563
0.068 µF
683
0.082 µF
823
0.10 µF
104
0.12 µF
124
0.15 µF
154
0.22 µF
224
0.33 µF
334
0.47 µF
474
0.68 µF
684
1.0 µF
105
15
20
50
100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For technical questions, contact: [email protected]
Document Number: 45164
Revision: 17-Jan-06
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
Vishay
PART NUMBER LISTING - if not in range chart, please contact [email protected]
MONO-AXIAL Y5V - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
10 000
10 000
15 000
15 000
22 000
22 000
33 000
33 000
47 000
47 000
68 000
68 000
100 000
100 000
150 000
150 000
220 000
220 000
330 000
330 000
470 000
470 000
680 000
680 000
1 000 000
1 000 000
RATED VOLTAGE (VDC)
50
+ 80 %/- 20 % TOLERANCE
A103Z15Y5VF5TAA
A103Z15Y5VF5UAA
A153Z15Y5VF5TAA
A153Z15Y5VF5UAA
A223Z15Y5VF5TAA
A223Z15Y5VF5UAA
A333Z15Y5VF5TAA
A333Z15Y5VF5UAA
A473Z15Y5VF5TAA
A473Z15Y5VF5UAA
A683Z15Y5VF5TAA
A683Z15Y5VF5UAA
A104Z15Y5VF5TAA
A104Z15Y5VF5UAA
A154Z15Y5VF5TAA
A154Z15Y5VF5UAA
A224Z15Y5VF5TAA
A224Z15Y5VF5UAA
A334Z15Y5VF5TAA
A334Z15Y5VF5UAA
A474Z20Y5VF5TAA
A474Z20Y5VF5UAA
A684Z20Y5VF5TAA
A684Z20Y5VF5UAA
A105Z20Y5VF5TAA
A105Z20Y5VF5UAA
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
MONO-AXIAL X7R - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
100
100
120
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
Document Number: 45164
Revision: 17-Jan-06
RATED VOLTAGE (VDC)
50
10 % TOLERANCE
A101K15X7RF5TAA
A101K15X7RF5UAA
A121K15X7RF5TAA
A121K15X7RF5UAA
A151K15X7RF5TAA
A151K15X7RF5UAA
A181K15X7RF5TAA
A181K15X7RF5UAA
A221K15X7RF5TAA
A221K15X7RF5UAA
A271K15X7RF5TAA
A271K15X7RF5UAA
A331K15X7RF5TAA
A331K15X7RF5UAA
A391K15X7RF5TAA
A391K15X7RF5UAA
A471K15X7RF5TAA
A471K15X7RF5UAA
A561K15X7RF5TAA
A561K15X7RF5UAA
A681K15X7RF5TAA
A681K15X7RF5UAA
20 % TOLERANCE
A101M15X7RF5TAA
A101M15X7RF5UAA
A121M15X7RF5TAA
A121M15X7RF5UAA
A151M15X7RF5TAA
A151M15X7RF5UAA
A181M15X7RF5TAA
A181M15X7RF5UAA
A221M15X7RF5TAA
A221M15X7RF5UAA
A271M15X7RF5TAA
A271M15X7RF5UAA
A331M15X7RF5TAA
A331M15X7RF5UAA
A391M15X7RF5TAA
A391M15X7RF5UAA
A471M15X7RF5TAA
A471M15X7RF5UAA
A561M15X7RF5TAA
A561M15X7RF5UAA
A681M15X7RF5TAA
A681M15X7RF5UAA
For technical questions, contact: [email protected]
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
www.vishay.com
23
Mono-Axial
Vishay
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
MONO-AXIAL X7R - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
820
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2200
2700
2700
3300
3300
3900
3900
4700
4700
5600
5600
6800
6800
8200
8200
10 000
10 000
12 000
12 000
15 000
15 000
18 000
18 000
22 000
22 000
27 000
27 000
33 000
33 000
39 000
39 000
47 000
47 000
56 000
56 000
68 000
68 000
82 000
82 000
100 000
100 000
120 000
www.vishay.com
24
RATED VOLTAGE (VDC)
50
10 % TOLERANCE
A821K15X7RF5TAA
A821K15X7RF5UAA
A102K15X7RF5TAA
A102K15X7RF5UAA
A122K15X7RF5TAA
A122K15X7RF5UAA
A152K15X7RF5TAA
A152K15X7RF5UAA
A182K15X7RF5TAA
A182K15X7RF5UAA
A222K15X7RF5TAA
A222K15X7RF5UAA
A272K15X7RF5TAA
A272K15X7RF5UAA
A332K15X7RF5TAA
A332K15X7RF5UAA
A392K15X7RF5TAA
A392K15X7RF5UAA
A472K15X7RF5TAA
A472K15X7RF5UAA
A562K15X7RF5TAA
A562K15X7RF5UAA
A682K15X7RF5TAA
A682K15X7RF5UAA
A822K15X7RF5TAA
A822K15X7RF5UAA
A103K15X7RF5TAA
A103K15X7RF5UAA
A123K15X7RF5TAA
A123K15X7RF5UAA
A153K15X7RF5TAA
A153K15X7RF5UAA
A183K15X7RF5TAA
A183K15X7RF5UAA
A223K15X7RF5TAA
A223K15X7RF5UAA
A273K15X7RF5TAA
A273K15X7RF5UAA
A333K15X7RF5TAA
A333K15X7RF5UAA
A393K15X7RF5TAA
A393K15X7RF5UAA
A473K15X7RF5TAA
A473K15X7RF5UAA
A563K15X7RF5TAA
A563K15X7RF5UAA
A683K15X7RF5TAA
A683K15X7RF5UAA
A823K15X7RF5TAA
A823K15X7RF5UAA
A104K15X7RF5TAA
A104K15X7RF5UAA
A124K20X7RF5TAA
20 % TOLERANCE
A821M15X7RF5TAA
A821M15X7RF5UAA
A102M15X7RF5TAA
A102M15X7RF5UAA
A122M15X7RF5TAA
A122M15X7RF5UAA
A152M15X7RF5TAA
A152M15X7RF5UAA
A182M15X7RF5TAA
A182M15X7RF5UAA
A222M15X7RF5TAA
A222M15X7RF5UAA
A272M15X7RF5TAA
A272M15X7RF5UAA
A332M15X7RF5TAA
A332M15X7RF5UAA
A392M15X7RF5TAA
A392M15X7RF5UAA
A472M15X7RF5TAA
A472M15X7RF5UAA
A562M15X7RF5TAA
A562M15X7RF5UAA
A682M15X7RF5TAA
A682M15X7RF5UAA
A822M15X7RF5TAA
A822M15X7RF5UAA
A103M15X7RF5TAA
A103M15X7RF5UAA
A123M15X7RF5TAA
A123M15X7RF5UAA
A153M15X7RF5TAA
A153M15X7RF5UAA
A183M15X7RF5TAA
A183M15X7RF5UAA
A223M15X7RF5TAA
A223M15X7RF5UAA
A273M15X7RF5TAA
A273M15X7RF5UAA
A333M15X7RF5TAA
A333M15X7RF5UAA
A393M15X7RF5TAA
A393M15X7RF5UAA
A473M15X7RF5TAA
A473M15X7RF5UAA
A563M15X7RF5TAA
A563M15X7RF5UAA
A683M15X7RF5TAA
A683M15X7RF5UAA
A823M15X7RF5TAA
A823M15X7RF5UAA
A104M15X7RF5TAA
A104M15X7RF5UAA
A124M20X7RF5TAA
For technical questions, contact: [email protected]
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
Document Number: 45164
Revision: 17-Jan-06
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
Vishay
MONO-AXIAL X7R - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
120 000
150 000
150 000
220 000
220 000
330 000
330 000
470 000
470 000
680 000
680 000
1 000 000
1 000 000
RATED VOLTAGE (VDC)
50
10 % TOLERANCE
A124K20X7RF5UAA
A154K20X7RF5TAA
A154K20X7RF5UAA
A224K20X7RF5TAA
A224K20X7RF5UAA
A334K20X7RF5TAA
A334K20X7RF5UAA
A474K20X7RF5TAA
A474K20X7RF5UAA
A684K20X7RF5TAA
A684K20X7RF5UAA
A105K20X7RF5TAA
A105K20X7RF5UAA
20 % TOLERANCE
A124M20X7RF5UAA
A154M20X7RF5TAA
A154M20X7RF5UAA
A224M20X7RF5TAA
A224M20X7RF5UAA
A334M20X7RF5TAA
A334M20X7RF5UAA
A474M20X7RF5TAA
A474M20X7RF5UAA
A684M20X7RF5TAA
A684M20X7RF5UAA
A105M20X7RF5TAA
A105M20X7RF5UAA
PACKAGING
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
10 % TOLERANCE
A100K15C0GF5TAA
A100K15C0GF5UAA
A120K15C0GF5TAA
A120K15C0GF5UAA
A150K15C0GF5TAA
A150K15C0GF5UAA
A180K15C0GF5TAA
A180K15C0GF5UAA
A220K15C0GF5TAA
A220K15C0GF5UAA
A270K15C0GF5TAA
A270K15C0GF5UAA
A330K15C0GF5TAA
A330K15C0GF5UAA
A390K15C0GF5TAA
A390K15C0GF5UAA
A470K15C0GF5TAA
A470K15C0GF5UAA
A560K15C0GF5TAA
A560K15C0GF5UAA
A680K15C0GF5TAA
A680K15C0GF5UAA
A820K15C0GF5TAA
A820K15C0GF5UAA
A101K15C0GF5TAA
A101K15C0GF5UAA
A121K15C0GF5TAA
A121K15C0GF5UAA
A151K15C0GF5TAA
A151K15C0GF5UAA
A181K15C0GF5TAA
A181K15C0GF5UAA
A221K15C0GF5TAA
A221K15C0GF5UAA
A271K15C0GF5TAA
A271K15C0GF5UAA
A331K15C0GF5TAA
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
MONO-AXIAL C0G - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
10
10
12
12
15
15
18
18
22
22
27
27
33
33
39
39
47
47
56
56
68
68
82
82
100
100
120
120
150
150
180
180
220
220
270
270
330
Document Number: 45164
Revision: 17-Jan-06
RATED VOLTAGE (VDC)
50
5 % TOLERANCE
A100J15C0GF5TAA
A100J15C0GF5UAA
A120J15C0GF5TAA
A120J15C0GF5UAA
A150J15C0GF5TAA
A150J15C0GF5UAA
A180J15C0GF5TAA
A180J15C0GF5UAA
A220J15C0GF5TAA
A220J15C0GF5UAA
A270J15C0GF5TAA
A270J15C0GF5UAA
A330J15C0GF5TAA
A330J15C0GF5UAA
A390J15C0GF5TAA
A390J15C0GF5UAA
A470J15C0GF5TAA
A470J15C0GF5UAA
A560J15C0GF5TAA
A560J15C0GF5UAA
A680J15C0GF5TAA
A680J15C0GF5UAA
A820J15C0GF5TAA
A820J15C0GF5UAA
A101J15C0GF5TAA
A101J15C0GF5UAA
A121J15C0GF5TAA
A121J15C0GF5UAA
A151J15C0GF5TAA
A151J15C0GF5UAA
A181J15C0GF5TAA
A181J15C0GF5UAA
A221J15C0GF5TAA
A221J15C0GF5UAA
A271J15C0GF5TAA
A271J15C0GF5UAA
A331J15C0GF5TAA
For technical questions, contact: [email protected]
www.vishay.com
25
Mono-Axial
Vishay
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
MONO-AXIAL C0G - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
330
390
390
470
470
560
560
680
680
820
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2200
2700
2700
3300
3300
3900
3900
4700
4700
5600
5600
RATED VOLTAGE (VDC)
50
5 % TOLERANCE
A331J15C0GF5UAA
A391J15C0GF5TAA
A391J15C0GF5UAA
A471J15C0GF5TAA
A471J15C0GF5UAA
A561J15C0GF5TAA
A561J15C0GF5UAA
A681J15C0GF5TAA
A681J15C0GF5UAA
A821J15C0GF5TAA
A821J15C0GF5UAA
A102J15C0GF5TAA
A102J15C0GF5UAA
A122J15C0GF5TAA
A122J15C0GF5UAA
A152J15C0GF5TAA
A152J15C0GF5UAA
A182J15C0GF5TAA
A182J15C0GF5UAA
A222J15C0GF5TAA
A222J15C0GF5UAA
A272J20C0GF5TAA
A272J20C0GF5UAA
A332J20C0GF5TAA
A332J20C0GF5UAA
A392J20C0GF5TAA
A392J20C0GF5UAA
A472J20C0GF5TAA
A472J20C0GF5UAA
A562J20C0GF5TAA
A562J20C0GF5UAA
10 % TOLERANCE
A331K15C0GF5UAA
A391K15C0GF5TAA
A391K15C0GF5UAA
A471K15C0GF5TAA
A471K15C0GF5UAA
A561K15C0GF5TAA
A561K15C0GF5UAA
A681K15C0GF5TAA
A681K15C0GF5UAA
A821K15C0GF5TAA
A821K15C0GF5UAA
A102K15C0GF5TAA
A102K15C0GF5UAA
A122K15C0GF5TAA
A122K15C0GF5UAA
A152K15C0GF5TAA
A152K15C0GF5UAA
A182K15C0GF5TAA
A182K15C0GF5UAA
A222K15C0GF5TAA
A222K15C0GF5UAA
A272K20C0GF5TAA
A272K20C0GF5UAA
A332K20C0GF5TAA
A332K20C0GF5UAA
A392K20C0GF5TAA
A392K20C0GF5UAA
A472K20C0GF5TAA
A472K20C0GF5UAA
A562K20C0GF5TAA
A562K20C0GF5UAA
PACKAGING
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
MONO-AXIAL Y5V - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
10 000
10 000
15 000
15 000
22 000
22 000
33 000
33 000
47 000
47 000
68 000
68 000
100 000
100 000
150 000
150 000
220 000
220 000
www.vishay.com
26
RATED VOLTAGE (VDC)
100
+ 80 %/- 20 % TOLERANCE
A103Z15Y5VH5TAA
A103Z15Y5VH5UAA
A153Z15Y5VH5TAA
A153Z15Y5VH5UAA
A223Z15Y5VH5TAA
A223Z15Y5VH5UAA
A333Z15Y5VH5TAA
A333Z15Y5VH5UAA
A473Z15Y5VH5TAA
A473Z15Y5VH5UAA
A683Z15Y5VH5TAA
A683Z15Y5VH5UAA
A104Z15Y5VH5TAA
A104Z15Y5VH5UAA
A154Z20Y5VH5TAA
A154Z20Y5VH5UAA
A224Z20Y5VH5TAA
A224Z20Y5VH5UAA
For technical questions, contact: [email protected]
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
Document Number: 45164
Revision: 17-Jan-06
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
Vishay
MONO-AXIAL X7R - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
100
100
120
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
820
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2200
2700
2700
3300
3300
3900
3900
4700
4700
5600
5600
6800
6800
8200
8200
10 000
10 000
12 000
12 000
Document Number: 45164
Revision: 17-Jan-06
RATED VOLTAGE (VDC)
100
10 % TOLERANCE
A101K15X7RH5TAA
A101K15X7RH5UAA
A121K15X7RH5TAA
A121K15X7RH5UAA
A151K15X7RH5TAA
A151K15X7RH5UAA
A181K15X7RH5TAA
A181K15X7RH5UAA
A221K15X7RH5TAA
A221K15X7RH5UAA
A271K15X7RH5TAA
A271K15X7RH5UAA
A331K15X7RH5TAA
A331K15X7RH5UAA
A391K15X7RH5TAA
A391K15X7RH5UAA
A471K15X7RH5TAA
A471K15X7RH5UAA
A561K15X7RH5TAA
A561K15X7RH5UAA
A681K15X7RH5TAA
A681K15X7RH5UAA
A821K15X7RH5TAA
A821K15X7RH5UAA
A102K15X7RH5TAA
A102K15X7RH5UAA
A122K15X7RH5TAA
A122K15X7RH5UAA
A152K15X7RH5TAA
A152K15X7RH5UAA
A182K15X7RH5TAA
A182K15X7RH5UAA
A222K15X7RH5TAA
A222K15X7RH5UAA
A272K15X7RH5TAA
A272K15X7RH5UAA
A332K15X7RH5TAA
A332K15X7RH5UAA
A392K15X7RH5TAA
A392K15X7RH5UAA
A472K15X7RH5TAA
A472K15X7RH5UAA
A562K15X7RH5TAA
A562K15X7RH5UAA
A682K15X7RH5TAA
A682K15X7RH5UAA
A822K15X7RH5TAA
A822K15X7RH5UAA
A103K15X7RH5TAA
A103K15X7RH5UAA
A123K15X7RH5TAA
A123K15X7RH5UAA
20 % TOLERANCE
A101M15X7RH5TAA
A101M15X7RH5UAA
A121M15X7RH5TAA
A121M15X7RH5UAA
A151M15X7RH5TAA
A151M15X7RH5UAA
A181M15X7RH5TAA
A181M15X7RH5UAA
A221M15X7RH5TAA
A221M15X7RH5UAA
A271M15X7RH5TAA
A271M15X7RH5UAA
A331M15X7RH5TAA
A331M15X7RH5UAA
A391M15X7RH5TAA
A391M15X7RH5UAA
A471M15X7RH5TAA
A471M15X7RH5UAA
A561M15X7RH5TAA
A561M15X7RH5UAA
A681M15X7RH5TAA
A681M15X7RH5UAA
A821M15X7RH5TAA
A821M15X7RH5UAA
A102M15X7RH5TAA
A102M15X7RH5UAA
A122M15X7RH5TAA
A122M15X7RH5UAA
A152M15X7RH5TAA
A152M15X7RH5UAA
A182M15X7RH5TAA
A182M15X7RH5UAA
A222M15X7RH5TAA
A222M15X7RH5UAA
A272M15X7RH5TAA
A272M15X7RH5UAA
A332M15X7RH5TAA
A332M15X7RH5UAA
A392M15X7RH5TAA
A392M15X7RH5UAA
A472M15X7RH5TAA
A472M15X7RH5UAA
A562M15X7RH5TAA
A562M15X7RH5UAA
A682M15X7RH5TAA
A682M15X7RH5UAA
A822M15X7RH5TAA
A822M15X7RH5UAA
A103M15X7RH5TAA
A103M15X7RH5UAA
A123M15X7RH5TAA
A123M15X7RH5UAA
For technical questions, contact: [email protected]
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
www.vishay.com
27
Mono-Axial
Vishay
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
MONO-AXIAL X7R - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
15 000
15 000
18 000
18 000
22 000
22 000
27 000
27 000
33 000
33 000
39 000
39 000
47 000
47 000
56 000
56 000
68 000
68 000
82 000
82 000
100 000
100 000
RATED VOLTAGE (VDC)
100
10 % TOLERANCE
A153K15X7RH5TAA
A153K15X7RH5UAA
A183K15X7RH5TAA
A183K15X7RH5UAA
A223K15X7RH5TAA
A223K15X7RH5UAA
A273K20X7RH5TAA
A273K20X7RH5UAA
A333K20X7RH5TAA
A333K20X7RH5UAA
A393K20X7RH5TAA
A393K20X7RH5UAA
A473K20X7RH5TAA
A473K20X7RH5UAA
A563K20X7RH5TAA
A563K20X7RH5UAA
A683K20X7RH5TAA
A683K20X7RH5UAA
A823K20X7RH5TAA
A823K20X7RH5UAA
A104K20X7RH5TAA
A104K20X7RH5UAA
20 % TOLERANCE
A153M15X7RH5TAA
A153M15X7RH5UAA
A183M15X7RH5TAA
A183M15X7RH5UAA
A223M15X7RH5TAA
A223M15X7RH5UAA
A273M20X7RH5TAA
A273M20X7RH5UAA
A333M20X7RH5TAA
A333M20X7RH5UAA
A393M20X7RH5TAA
A393M20X7RH5UAA
A473M20X7RH5TAA
A473M20X7RH5UAA
A563M20X7RH5TAA
A563M20X7RH5UAA
A683M20X7RH5TAA
A683M20X7RH5UAA
A823M20X7RH5TAA
A823M20X7RH5UAA
A104M20X7RH5TAA
A104M20X7RH5UAA
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
10 % TOLERANCE
A100K15C0GH5TAA
A100K15C0GH5UAA
A120K15C0GH5TAA
A120K15C0GH5UAA
A150K15C0GH5TAA
A150K15C0GH5UAA
A180K15C0GH5TAA
A180K15C0GH5UAA
A220K15C0GH5TAA
A220K15C0GH5UAA
A270K15C0GH5TAA
A270K15C0GH5UAA
A330K15C0GH5TAA
A330K15C0GH5UAA
A390K15C0GH5TAA
A390K15C0GH5UAA
A470K15C0GH5TAA
A470K15C0GH5UAA
A560K15C0GH5TAA
A560K15C0GH5UAA
A680K15C0GH5TAA
A680K15C0GH5UAA
A820K15C0GH5TAA
A820K15C0GH5UAA
A101K15C0GH5TAA
A101K15C0GH5UAA
A121K15C0GH5TAA
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
MONO-AXIAL C0G - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
10
10
12
12
15
15
18
18
22
22
27
27
33
33
39
39
47
47
56
56
68
68
82
82
100
100
120
www.vishay.com
28
RATED VOLTAGE (VDC)
100
5 % TOLERANCE
A100J15C0GH5TAA
A100J15C0GH5UAA
A120J15C0GH5TAA
A120J15C0GH5UAA
A150J15C0GH5TAA
A150J15C0GH5UAA
A180J15C0GH5TAA
A180J15C0GH5UAA
A220J15C0GH5TAA
A220J15C0GH5UAA
A270J15C0GH5TAA
A270J15C0GH5UAA
A330J15C0GH5TAA
A330J15C0GH5UAA
A390J15C0GH5TAA
A390J15C0GH5UAA
A470J15C0GH5TAA
A470J15C0GH5UAA
A560J15C0GH5TAA
A560J15C0GH5UAA
A680J15C0GH5TAA
A680J15C0GH5UAA
A820J15C0GH5TAA
A820J15C0GH5UAA
A101J15C0GH5TAA
A101J15C0GH5UAA
A121J15C0GH5TAA
For technical questions, contact: [email protected]
Document Number: 45164
Revision: 17-Jan-06
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
50 VDC and 100 VDC
Vishay
MONO-AXIAL C0G - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
820
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2200
2700
2700
3300
3300
3900
3900
4700
4700
5600
5600
Document Number: 45164
Revision: 17-Jan-06
RATED VOLTAGE (VDC)
100
5 % TOLERANCE
A121J15C0GH5UAA
A151J15C0GH5TAA
A151J15C0GH5UAA
A181J15C0GH5TAA
A181J15C0GH5UAA
A221J15C0GH5TAA
A221J15C0GH5UAA
A271J15C0GH5TAA
A271J15C0GH5UAA
A331J15C0GH5TAA
A331J15C0GH5UAA
A391J15C0GH5TAA
A391J15C0GH5UAA
A471J15C0GH5TAA
A471J15C0GH5UAA
A561J15C0GH5TAA
A561J15C0GH5UAA
A681J15C0GH5TAA
A681J15C0GH5UAA
A821J15C0GH5TAA
A821J15C0GH5UAA
A102J20C0GH5TAA
A102J20C0GH5UAA
A122J20C0GH5TAA
A122J20C0GH5UAA
A152J20C0GH5TAA
A152J20C0GH5UAA
A182J20C0GH5TAA
A182J20C0GH5UAA
A222J20C0GH5TAA
A222J20C0GH5UAA
A272J20C0GH5TAA
A272J20C0GH5UAA
A332J20C0GH5TAA
A332J20C0GH5UAA
A392J20C0GH5TAA
A392J20C0GH5UAA
A472J20C0GH5TAA
A472J20C0GH5UAA
A562J20C0GH5TAA
A562J20C0GH5UAA
10 % TOLERANCE
A121K15C0GH5UAA
A151K15C0GH5TAA
A151K15C0GH5UAA
A181K15C0GH5TAA
A181K15C0GH5UAA
A221K15C0GH5TAA
A221K15C0GH5UAA
A271K15C0GH5TAA
A271K15C0GH5UAA
A331K15C0GH5TAA
A331K15C0GH5UAA
A391K15C0GH5TAA
A391K15C0GH5UAA
A471K15C0GH5TAA
A471K15C0GH5UAA
A561K15C0GH5TAA
A561K15C0GH5UAA
A681K15C0GH5TAA
A681K15C0GH5UAA
A821K15C0GH5TAA
A821K15C0GH5UAA
A102K20C0GH5TAA
A102K20C0GH5UAA
A122K20C0GH5TAA
A122K20C0GH5UAA
A152K20C0GH5TAA
A152K20C0GH5UAA
A182K20C0GH5TAA
A182K20C0GH5UAA
A222K20C0GH5TAA
A222K20C0GH5UAA
A272K20C0GH5TAA
A272K20C0GH5UAA
A332K20C0GH5TAA
A332K20C0GH5UAA
A392K20C0GH5TAA
A392K20C0GH5UAA
A472K20C0GH5TAA
A472K20C0GH5UAA
A562K20C0GH5TAA
A562K20C0GH5UAA
For technical questions, contact: [email protected]
PACKAGING
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
www.vishay.com
29
Mono-Axial
Vishay
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
DIMENSIONS
5 mm or
6.35 mm wide
carrier tape
Lb
Ø 0.5
ØD
52.4 ± 1.5
CAPACITOR DIMENSIONS AND WEIGHT in millimeters (inches)
Lbmax.
Ø Dmax.
WEIGHT
(g)
15
3.8 (0.150)
2.5 (0.100)
≈ 0.14
20
5.0 (0.200)
3.0 (0.120)
≈ 0.15
SIZE
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Capacitance range
33 pF to 2200 pF
Rated DC voltage
200 V
100 pF to 0.047 µF
500 V
Tolerance on capacitance
Dielectric Code
200 V
500 V
± 5 %, ± 10 %
± 10 %, ± 20 %
C0G (NP0)
X7R
ORDERING INFORMATION
A
103
K
15
X7R
K
5
TAA
PRODUCT
TYPE
CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
SIZE CODE
TEMP.
CHAR.
RATED
VOLTAGE
LEAD
DIAMETER
PACKAGING
A = Mono-Axial
Two significant
digits followed by
the number of
zeros.
For example:
473 = 47 000 pF
J=±5%
K = ± 10 %
M = ± 20 %
15 = 3.8 (0.15") max.
20 = 5.0 (0.20") max.
C0G
X7R
K = 200 VDC
L = 500 VDC
5 = 0.5 mm (0.20")
TAA = T and R
UAA = AMMO
Ordering Example: A-103-K-15-X7R-K-5-TAA
www.vishay.com
30
For technical questions, contact: [email protected]
Document Number: 45167
Revision: 17-Jan-06
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
Vishay
CAPACITANCE RANGE CHART
C0G (NP0) DIELECTRIC
SIZE
X7R DIELECTRIC
15
RATED VOLTAGE
500
RATED VOLTAGE
20
101
•
•
120 pF
121
•
•
150 pF
151
•
•
180
180 pF
181
•
•
22 pF
220
220 pF
221
•
•
27 pF
270
270 pF
271
•
•
33 pF
330
•
•
330 pF
331
•
•
39 pF
390
•
•
390 pF
391
•
•
47 pF
470
•
•
470 pF
471
•
•
56 pF
560
•
•
560 pF
561
•
•
68 pF
680
•
•
680 pF
681
•
•
82 pF
820
•
•
820 pF
821
•
•
100 pF
101
•
•
1000 pF
102
•
•
120 pF
121
•
•
1200 pF
122
•
•
150 pF
151
•
•
1500 pF
152
•
•
180 pF
181
•
•
1800 pF
182
•
•
220 pF
221
•
•
2200 pF
222
•
•
270 pF
271
•
•
2700 pF
272
•
•
330 pF
331
•
•
3300 pF
332
•
•
390 pF
391
•
•
3900 pF
392
•
•
470 pF
471
•
•
4700 pF
472
•
•
560 pF
561
•
•
5600 pF
562
•
•
680 pF
681
•
•
6800 pF
682
•
•
820 pF
821
•
•
8200 pF
822
•
•
1000 pF
102
•
•
0.01 µF
103
•
•
1200 pF
122
•
0.012 µF
123
•
•
1500 pF
152
•
0.015 µF
153
•
•
1800 pF
182
•
0.018 µF
183
•
•
2200 pF
222
•
0.022 µF
223
•
2700 pF
272
0.027 µF
273
•
•
3300 pF
332
0.033 µF
333
•
•
3900 pF
392
0.039 µF
393
•
4700 pF
472
0.047 µF
473
•
0.056 µF
563
0.068 µF
683
0.082 µF
823
0.10 µF
104
10 pF
200
15
500
CODE
500
SIZE
200
VALUE
200
20
VALUE
CODE
100
100 pF
12 pF
120
15 pF
150
18 pF
Document Number: 45167
Revision: 17-Jan-06
For technical questions, contact: [email protected]
200
500
•
www.vishay.com
31
Mono-Axial
Vishay
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
PART NUMBER LISTING - if not in range chart, please contact [email protected]
MONO-AXIAL X7R - 200 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
100
100
120
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
820
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2200
2700
2700
3300
3300
3900
3900
4700
4700
5600
5600
6800
6800
8200
8200
10 000
10 000
12 000
www.vishay.com
32
RATED VOLTAGE (VDC)
200
10 % TOLERANCE
A101K15X7RK5TAA
A101K15X7RK5UAA
A121K15X7RK5TAA
A121K15X7RK5UAA
A151K15X7RK5TAA
A151K15X7RK5UAA
A181K15X7RK5TAA
A181K15X7RK5UAA
A221K15X7RK5TAA
A221K15X7RK5UAA
A271K15X7RK5TAA
A271K15X7RK5UAA
A331K15X7RK5TAA
A331K15X7RK5UAA
A391K15X7RK5TAA
A391K15X7RK5UAA
A471K15X7RK5TAA
A471K15X7RK5UAA
A561K15X7RK5TAA
A561K15X7RK5UAA
A681K15X7RK5TAA
A681K15X7RK5UAA
A821K15X7RK5TAA
A821K15X7RK5UAA
A102K15X7RK5TAA
A102K15X7RK5UAA
A122K15X7RK5TAA
A122K15X7RK5UAA
A152K15X7RK5TAA
A152K15X7RK5UAA
A182K15X7RK5TAA
A182K15X7RK5UAA
A222K15X7RK5TAA
A222K15X7RK5UAA
A272K15X7RK5TAA
A272K15X7RK5UAA
A332K15X7RK5TAA
A332K15X7RK5UAA
A392K15X7RK5TAA
A392K15X7RK5UAA
A472K15X7RK5TAA
A472K15X7RK5UAA
A562K15X7RK5TAA
A562K15X7RK5UAA
A682K15X7RK5TAA
A682K15X7RK5UAA
A822K15X7RK5TAA
A822K15X7RK5UAA
A103K15X7RK5TAA
A103K15X7RK5UAA
A123K15X7RK5TAA
20 % TOLERANCE
A101M15X7RK5TAA
A101M15X7RK5UAA
A121M15X7RK5TAA
A121M15X7RK5UAA
A151M15X7RK5TAA
A151M15X7RK5UAA
A181M15X7RK5TAA
A181M15X7RK5UAA
A221M15X7RK5TAA
A221M15X7RK5UAA
A271M15X7RK5TAA
A271M15X7RK5UAA
A331M15X7RK5TAA
A331M15X7RK5UAA
A391M15X7RK5TAA
A391M15X7RK5UAA
A471M15X7RK5TAA
A471M15X7RK5UAA
A561M15X7RK5TAA
A561M15X7RK5UAA
A681M15X7RK5TAA
A681M15X7RK5UAA
A821M15X7RK5TAA
A821M15X7RK5UAA
A102M15X7RK5TAA
A102M15X7RK5UAA
A122M15X7RK5TAA
A122M15X7RK5UAA
A152M15X7RK5TAA
A152M15X7RK5UAA
A182M15X7RK5TAA
A182M15X7RK5UAA
A222M15X7RK5TAA
A222M15X7RK5UAA
A272M15X7RK5TAA
A272M15X7RK5UAA
A332M15X7RK5TAA
A332M15X7RK5UAA
A392M15X7RK5TAA
A392M15X7RK5UAA
A472M15X7RK5TAA
A472M15X7RK5UAA
A562M15X7RK5TAA
A562M15X7RK5UAA
A682M15X7RK5TAA
A682M15X7RK5UAA
A822M15X7RK5TAA
A822M15X7RK5UAA
A103M15X7RK5TAA
A103M15X7RK5UAA
A123M15X7RK5TAA
For technical questions, contact: [email protected]
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
Document Number: 45167
Revision: 17-Jan-06
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
Vishay
MONO-AXIAL X7R - 200 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
12 000
15 000
15 000
18 000
18 000
22 000
22 000
27 000
27 000
33 000
33 000
39 000
39 000
47 000
47 000
RATED VOLTAGE (VDC)
200
10 % TOLERANCE
A123K15X7RK5UAA
A153K15X7RK5TAA
A153K15X7RK5UAA
A183K15X7RK5TAA
A183K15X7RK5UAA
A223K15X7RK5TAA
A223K15X7RK5UAA
A273K20X7RK5TAA
A273K20X7RK5UAA
A333K20X7RK5TAA
A333K20X7RK5UAA
A393K20X7RK5TAA
A393K20X7RK5UAA
A473K20X7RK5TAA
A473K20X7RK5UAA
20 % TOLERANCE
A123M15X7RK5UAA
A153M15X7RK5TAA
A153M15X7RK5UAA
A183M15X7RK5TAA
A183M15X7RK5UAA
A223M15X7RK5TAA
A223M15X7RK5UAA
A273M20X7RK5TAA
A273M20X7RK5UAA
A333M20X7RK5TAA
A333M20X7RK5UAA
A393M20X7RK5TAA
A393M20X7RK5UAA
A473M20X7RK5TAA
A473M20X7RK5UAA
PACKAGING
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
10 % TOLERANCE
A330K15C0GK5TAA
A330K15C0GK5UAA
A390K15C0GK5TAA
A390K15C0GK5UAA
A470K15C0GK5TAA
A470K15C0GK5UAA
A560K15C0GK5TAA
A560K15C0GK5UAA
A680K15C0GK5TAA
A680K15C0GK5UAA
A820K15C0GK5TAA
A820K15C0GK5UAA
A101K15C0GK5TAA
A101K15C0GK5UAA
A121K15C0GK5TAA
A121K15C0GK5UAA
A151K15C0GL5TAA
A151K15C0GL5UAA
A181K15C0GL5TAA
A181K15C0GL5UAA
A221K15C0GL5TAA
A221K15C0GL5UAA
A271K15C0GL5TAA
A271K15C0GL5UAA
A331K15C0GL5TAA
A331K15C0GL5UAA
A391K15C0GL5TAA
A391K15C0GL5UAA
A471K20C0GL5TAA
A471K20C0GL5UAA
A561K20C0GL5TAA
A561K20C0GL5UAA
A681K20C0GL5TAA
A681K20C0GL5UAA
A821K20C0GL5TAA
PACKAGING
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
MONO-AXIAL C0G - 200 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
33
33
39
39
47
47
56
56
68
68
82
82
100
100
120
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
820
Document Number: 45167
Revision: 17-Jan-06
RATED VOLTAGE (VDC)
200
5 % TOLERANCE
A330J15C0GK5TAA
A330J15C0GK5UAA
A390J15C0GK5TAA
A390J15C0GK5UAA
A470J15C0GK5TAA
A470J15C0GK5UAA
A560J15C0GK5TAA
A560J15C0GK5UAA
A680J15C0GK5TAA
A680J15C0GK5UAA
A820J15C0GK5TAA
A820J15C0GK5UAA
A101J15C0GK5TAA
A101J15C0GK5UAA
A121J15C0GK5TAA
A121J15C0GK5UAA
A151J15C0GL5TAA
A151J15C0GL5UAA
A181J15C0GL5TAA
A181J15C0GL5UAA
A221J15C0GL5TAA
A221J15C0GL5UAA
A271J15C0GL5TAA
A271J15C0GL5UAA
A331J15C0GL5TAA
A331J15C0GL5UAA
A391J15C0GL5TAA
A391J15C0GL5UAA
A471J20C0GL5TAA
A471J20C0GL5UAA
A561J20C0GL5TAA
A561J20C0GL5UAA
A681J20C0GL5TAA
A681J20C0GL5UAA
A821J20C0GL5TAA
For technical questions, contact: [email protected]
www.vishay.com
33
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
Vishay
MONO-AXIAL C0G - 200 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2200
RATED VOLTAGE (VDC)
200
5 % TOLERANCE
A821J20C0GL5UAA
A102J20C0GL5TAA
A102J20C0GL5UAA
A122J20C0GL5TAA
A122J20C0GL5UAA
A152J20C0GL5TAA
A152J20C0GL5UAA
A182J20C0GL5TAA
A182J20C0GL5UAA
A222J20C0GK5TAA
A222J20C0GK5UAA
10 % TOLERANCE
A821K20C0GL5UAA
A102K20C0GL5TAA
A102K20C0GL5UAA
A122K20C0GL5TAA
A122K20C0GL5UAA
A152K20C0GL5TAA
A152K20C0GL5UAA
A182K20C0GL5TAA
A182K20C0GL5UAA
A220K20C0GK5TAA
A220K20C0GK5UAA
PACKAGING
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
MONO-AXIAL X7R - 500 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
100
100
120
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
820
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2200
2700
2700
3300
www.vishay.com
34
RATED VOLTAGE (VDC)
10 % TOLERANCE
20 % TOLERANCE
PACKAGING
500
A101K15X7RL5TAA
A101K15X7RL5UAA
A121K15X7RL5TAA
A121K15X7RL5UAA
A151K15X7RL5TAA
A151K15X7RL5UAA
A181K15X7RL5TAA
A181K15X7RL5UAA
A221K15X7RL5TAA
A221K15X7RL5UAA
A271K15X7RL5TAA
A271K15X7RL5UAA
A331K15X7RL5TAA
A331K15X7RL5UAA
A391K15X7RL5TAA
A391K15X7RL5UAA
A471K15X7RL5TAA
A471K15X7RL5UAA
A561K15X7RL5TAA
A561K15X7RL5UAA
A681K15X7RL5TAA
A681K15X7RL5UAA
A821K15X7RL5TAA
A821K15X7RL5UAA
A102K15X7RL5TAA
A102K15X7RL5UAA
A122K15X7RL5TAA
A122K15X7RL5UAA
A152K15X7RL5TAA
A152K15X7RL5UAA
A182K15X7RL5TAA
A182K15X7RL5UAA
A222K15X7RL5TAA
A222K15X7RL5UAA
A272K15X7RL5TAA
A272K15X7RL5UAA
A332K20X7RL5TAA
A101M15X7RL5TAA
A101M15X7RL5UAA
A121M15X7RL5TAA
A121M15X7RL5UAA
A151M15X7RL5TAA
A151M15X7RL5UAA
A181M15X7RL5TAA
A181M15X7RL5UAA
A221M15X7RL5TAA
A221M15X7RL5UAA
A271M15X7RL5TAA
A271M15X7RL5UAA
A331M15X7RL5TAA
A331M15X7RL5UAA
A391M15X7RL5TAA
A391M15X7RL5UAA
A471M15X7RL5TAA
A471M15X7RL5UAA
A561M15X7RL5TAA
A561M15X7RL5UAA
A681M15X7RL5TAA
A681M15X7RL5UAA
A821M15X7RL5TAA
A821M15X7RL5UAA
A102M15X7RL5TAA
A102M15X7RL5UAA
A122M15X7RL5TAA
A122M15X7RL5UAA
A152M15X7RL5TAA
A152M15X7RL5UAA
A182M15X7RL5TAA
A182M15X7RL5UAA
A222M15X7RL5TAA
A222M15X7RL5UAA
A272M15X7RL5TAA
A272M15X7RL5UAA
A332M20X7RL5TAA
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
For technical questions, contact: [email protected]
Document Number: 45167
Revision: 17-Jan-06
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
Vishay
MONO-AXIAL X7R - 500 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
3300
3900
3900
4700
4700
5600
5600
6800
6800
8200
8200
10 000
10 000
12 000
12 000
15 000
15 000
18 000
18 000
22 000
22 000
27 000
27 000
33 000
33 000
RATED VOLTAGE (VDC)
10 % TOLERANCE
20 % TOLERANCE
PACKAGING
500
A332K20X7RL5UAA
A392K20X7RL5TAA
A392K20X7RL5UAA
A472K20X7RL5TAA
A472K20X7RL5UAA
A562K20X7RL5TAA
A562K20X7RL5UAA
A682K20X7RL5TAA
A682K20X7RL5UAA
A822K20X7RL5TAA
A822K20X7RL5UAA
A103K20X7RL5TAA
A103K20X7RL5UAA
A123K20X7RL5TAA
A123K20X7RL5UAA
A153K20X7RL5TAA
A153K20X7RL5UAA
A183K20X7RL5TAA
A183K20X7RL5UAA
A223K20X7RL5TAA
A223K20X7RL5UAA
A273K20X7RL5TAA
A273K20X7RL5UAA
A333K20X7RL5TAA
A333K20X7RL5UAA
A332M20X7RL5UAA
A392M20X7RL5TAA
A392M20X7RL5UAA
A472M20X7RL5TAA
A472M20X7RL5UAA
A562M20X7RL5TAA
A562M20X7RL5UAA
A682M20X7RL5TAA
A682M20X7RL5UAA
A822M20X7RL5TAA
A822M20X7RL5UAA
A103M20X7RL5TAA
A103M20X7RL5UAA
A123M20X7RL5TAA
A123M20X7RL5UAA
A153M20X7RL5TAA
A153M20X7RL5UAA
A183M20X7RL5TAA
A183M20X7RL5UAA
A223M20X7RL5TAA
A223M20X7RL5UAA
A273M20X7RL5TAA
A273M20X7RL5UAA
A333M20X7RL5TAA
A333M20X7RL5UAA
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
MONO-AXIAL C0G - 500 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
33
33
39
39
47
47
56
56
68
68
82
82
100
100
120
120
150
150
180
180
220
220
Document Number: 45167
Revision: 17-Jan-06
RATED VOLTAGE (VDC)
5 % TOLERANCE
10 % TOLERANCE
PACKAGING
500
A330J15C0GL5TAA
A330J15C0GL5UAA
A390J15C0GL5TAA
A390J15C0GL5UAA
A470J15C0GL5TAA
A470J15C0GL5UAA
A560J15C0GL5TAA
A560J15C0GL5UAA
A680J15C0GL5TAA
A680J15C0GL5UAA
A820J15C0GL5TAA
A820J15C0GL5UAA
A101J15C0GL5TAA
A101J15C0GL5UAA
A121J15C0GL5TAA
A121J15C0GL5UAA
A151J15C0GL5TAA
A151J15C0GL5UAA
A181J15C0GL5TAA
A181J15C0GL5UAA
A221J15C0GL5TAA
A221J15C0GL5UAA
A330K15C0GL5TAA
A330K15C0GL5UAA
A390K15C0GL5TAA
A390K15C0GL5UAA
A470K15C0GL5TAA
A470K15C0GL5UAA
A560K15C0GL5TAA
A560K15C0GL5UAA
A680K15C0GL5TAA
A680K15C0GL5UAA
A820K15C0GL5TAA
A820K15C0GL5UAA
A101K15C0GL5TAA
A101K15C0GL5UAA
A121K15C0GL5TAA
A121K15C0GL5UAA
A151K15C0GL5TAA
A151K15C0GL5UAA
A181K15C0GL5TAA
A181K15C0GL5UAA
A221K15C0GL5TAA
A221K15C0GL5UAA
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
For technical questions, contact: [email protected]
www.vishay.com
35
Mono-Axial
Multilayer Ceramic Dipped Axial Capacitors
200 VDC and 500 VDC
Vishay
MONO-AXIAL C0G - 500 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
270
270
330
330
390
390
470
470
560
560
680
680
820
820
1000
1000
www.vishay.com
36
RATED VOLTAGE (VDC)
5 % TOLERANCE
10 % TOLERANCE
PACKAGING
500
A271J15C0GL5TAA
A271J15C0GL5UAA
A331J15C0GL5TAA
A331J15C0GL5UAA
A391J15C0GL5TAA
A391J15C0GL5UAA
A471J20C0GL5TAA
A471J20C0GL5UAA
A561J20C0GL5TAA
A561J20C0GL5UAA
A681J20C0GL5TAA
A681J20C0GL5UAA
A821J20C0GL5TAA
A821J20C0GL5UAA
A102J20C0GL5TAA
A102J20C0GL5UAA
A271K15C0GL5TAA
A271K15C0GL5UAA
A331K15C0GL5TAA
A331K15C0GL5UAA
A391K15C0GL5TAA
A391K15C0GL5UAA
A471K20C0GL5TAA
A471K20C0GL5UAA
A561K20C0GL5TAA
A561K20C0GL5UAA
A681K20C0GL5TAA
A681K20C0GL5UAA
A821K20C0GL5TAA
A821K20C0GL5UAA
A102K20C0GL5TAA
A102K20C0GL5UAA
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
REEL
AMMO
For technical questions, contact: [email protected]
Document Number: 45167
Revision: 17-Jan-06
Contents
Construction and Lead
Configuration 50 VDC, 100 VDC,
200 VDC and 500 VDC ............. 38
Multilayer
Ceramic
Dipped Radial
Capacitors
Electrical Data and
Dielectric Characteristics
50 VDC and 100 VDC ............... 39
Electrical Data and
Dielectric Characteristics
200 VDC and 500 VDC ............. 44
Dimensions and Marking
50 VDC, 100 VDC, 200 VDC
and 500 VDC ........................... 48
Taping and Packaging
50 VDC, 100 VDC, 200 VDC
and 500 VDC ........................... 50
General Information
50 VDC, 100 VDC, 200 VDC
and 500 VDC ........................... 52
Mono-Kap
50 VDC and 100 VDC ............... 55
Mono-Kap
200 VDC and 500 VDC ............. 67
Ordering Information .............. 75
Cross Reference Vishay Sprague vs.
Vishay BCcomponents
Part Number ........................... 76
Construction and Lead Configuration
Vishay
Multilayer Ceramic Dipped Radial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
INTERNAL CONSTRUCTION
Multilayer ceramic capacitors consist of electrodes, the
interleaved ceramic dielectric and the external terminal
connectors. The capacitance is given by the description:
A x n x ε0 x εr
C = ------------------------------------d
Termination
A = Electrode area
n = Number of active layers
Electrodes
d = Distance between electrodes
Dielectric
(Ceramic)
εr = Dielectric relative
ε0 = Dielectric constant
Whilst the values “A x n” and “d” are respectively determined
by the production process, the dielectric constant is a
function of the ceramic material used.
LEAD CONFIGURATION
Radial Size 15 and Size 20
Base material: FeCu
Plating: Matte electrolytic, tinned
COMPONTENT OUTLINES
www.vishay.com
38
For technical questions, contact: [email protected]
Document Number: 45166
Revision: 19-Mar-07
Electrical Data and Dielectric Characteristics
Vishay
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
DIELECTRIC CHARACTERISTICS
DIELECTRIC ACCORDING TO EIA
According to CECC
C0G (NP0)
X7R
Y5V
CG
C1 (2C1)
2F4
Capacitance Range:
at 1 MHz, 1 V; where C ≤ 1000 pF
10 pF to 1000 pF
-
-
at 1 kHz, 1 V; where C > 1000 pF
1200 pF to 6800 pF
100 pF to 1.0 µF
0.1 µF to 1.0 µF
Tolerance on the Capacitance:
where C < 10 pF
± 0.5 pF (D)
-
-
where C > 10 pF
± 5 % (J); ± 10 % (K)
± 10 % (K); ± 20 % (M)
+ 80 %/- 20 % (Z)
Rated DC Voltage
50 V; 100 V
Dielectric Strength
250 % of rated voltage
100 000 MΩ or 1000 MΩ x µF
whichever is less at rated voltage
within 2 minutes of charging
Insulation Resistance (IR)
10 000 MΩ or
1000 MΩ x µF
whichever is less at rated
voltage within 2 minutes of
charging
0 x 10-6/K
-
-
± 30 x 10-6/K
-
-
-
± 15 %
+ 22 %/- 82 %
at 1 MHz, 1 V; where C ≤ 1000 pF
1
---------------------------------400 + 20 x C
-
-
at 1 kHz, 1 V; where C > 1000 pF
≤ 0.1 %
≤ 2.5 %
≤5%
Temperature Coefficient of the Capacitance
Tolerance of the Temperature Coefficient
Maximum Capacitance change with respect to
Capacitance at 25 °C
Dissipation Factor (DF)
Operating Temperature Range
- 55 °C to + 125 °C
Storage Temperature Range
- 30 °C to + 85 °C
25 °C ± 15 °C
Aging
-
typical 1 % per time decade typical 7 % per time decade
Note
• The capacitors meet the essential requirements of ‘EIA 198’.
Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at barometric pressures 650 mm to 800 mm of
mercury, and relative humidity not to exceed 75 %.
MAIN FEATURES
CLASS 1
CLASS 2
CLASS 3
APPLICATION
For temperature compensation of frequency
discriminating circuits and filters, coupling and
decoupling in high frequency circuits where
low losses and narrow capacitance tolerances
are demanded.
As coupling and decoupling
capacitors for such application
where higher losses and a
reduced capacitance stability
are tolerated.
As coupling and decoupling
capacitors for such application
where higher losses and a
reduced capacitance stability
are tolerated.
PROPERTIES
Temperature
Dependence
Capacitance
High stability of capacitance. Low dissipation
factor up to higher frequencies. Defined
temperature coefficient of capacitance,
positive or negative, linear and reversible.
High insulation resistance. No voltage
dependence. High long-term stability of
electrical values.
High capacitance values with
small dimensions.
Non-linear dependence of
capacitance on temperature.
High capacitance values with
small dimensions.
Non-linear dependence of
capacitance on temperature.
C0G (NP0)
X7R
Y5V
CG
2C1
2F4
CLASSIFICATION
Classification EIA:
Classification CECC:
Document Number: 45168
Revision: 24-Feb-06
For technical questions, contact: [email protected]
www.vishay.com
39
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
TEMPERATURE CHARACTERISTICS OF CAPACITANCE FOR CLASS 2/3 CERAMIC DIELECTRICS
ACCORDING TO CECC 32100
CODE LETTER FOR
SUB CATEGORY
MAXIMUM CAPACITANCE CHANGE IN % AT
THE SPECIFIED TEMPERATURE RANGE
DESIGNATION OF THE SPECIFIED TEMPERATURE RANGE
- 55 °C/+ 125 °C
- 30 °C/+ 85 °C
4
WITHOUT RATED
VOLTAGE
WITH RATED
VOLTAGE
1
2C
± 20 %
+ 20 %/- 30 %
X
2F
+ 30 %/- 80 %
+ 30 %/- 90 %
X
EIA - CODING SYSTEM FOR CLASS 2/3 CERAMIC
A
TYPE
X
7
WORKING TEMPERATURE RANGE
LOWER TEMP.
LIMIT
UPPER TEMP.
LIMIT
X = - 55 °C
Y = - 30 °C
7 = + 125 °C
5 = + 85 °C
R
103
M
CAPACITANCE CHANGE WITHIN
WORKING TEMP. RANGE
NO RATED VOLTAGE APPLIED
CAPACITANCE
IN pF
TOLERANCE
R = ± 15 %
V = - 82 %/+ 22 %
The first two digits
gives the nominal
value, the third digit
indicates the number
of zeros, e.g. 103 =
10 000 pF
For values below
10 pF an R is
inserted in the
second position
instead of a decimal
point e.g.
2R2 = 2.2 pF
D = ± 0.50 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Z =+ 80 %/- 20 %
Example: Vishay BCcomponents Description
EIA Description
www.vishay.com
40
For technical questions, contact: [email protected]
Document Number: 45168
Revision: 24-Feb-06
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - NP0
0.2
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITANCE
2.0
1.5
1.0
0.5
0.0
- 0.5
NP0
- 1.0
- 1.5
- 2.0
- 100 - 75 - 50 - 25
0
25
50
75
0.1
0.0
- 0.1
- 0.2
100 125 150
0
10
20
TEMPERATURE (°C)
40
50
60
70
80
90
100
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
AGING RATE - NP0
ΔC CAPACITANCE CHANGE (%)
C
10 000
INSULATION RESISTANCE (ΩF)
30
1000
100
10
0.2
0.1
0.0
- 0.1
- 0.2
10
25
100 125
1
TEMPERATURE (°C)
Document Number: 45168
Revision: 24-Feb-06
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
www.vishay.com
41
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
X7R DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
VOLTAGE COEFFICIENT OF CAPACITANCE - X7R
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
15
10
5
0
X7R
-5
- 10
- 15
- 20
- 100 - 75 - 50 - 25
0
25
50
75
5
0
-5
- 10
- 15
50 V
RATED
- 20
100 V
RATED
- 25
- 30
0
100 125 150
10
20
TEMPERATURE (°C)
30
40
50
60
70
80
90
100
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
INSULATION RESISTANCE (ΩF)
10 000
1000
100
10
10
25
100 125
TEMPERATURE (°C)
X7R
2.0
1.5
1.0
AGING RATE - X7R
ΔC CAPACITANCE CHANGE (%)
C
DISSIPATION
DISSIPATION FACTOR VS. TEMPERATURE
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
0.5
0.0
1.0
0.0
- 1.0
- 2.0
- 3.0
- 4.0
- 75
- 50 - 25
0
25
50
75
100
125
1
TEMPERATURE (°C)
www.vishay.com
42
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
Document Number: 45168
Revision: 24-Feb-06
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
Y5V DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - Y5V
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITOR
60
40
20
Y5V
0
- 20
- 40
- 60
- 80
- 100
- 50
- 25
0
25
50
75
40
20
0
- 20
100 V
RATED
- 40
- 60
50 V
RATED
- 80
- 100
0
100
10
20
30
40
50
60
70
80
90
100
VDC APPLIED
TEMPERATURE (°C)
INSULATION RESISTANCE (ΩF)
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
100 000
10 000
1000
- 50
0
- 25
25
50
75
100
TEMPERATURE (°C)
DISSIPATION FACTOR VS. TEMPERATURE
AGING RATE - Y5V
ΔC CAPACITANCE CHANGE (%)
C
20
DISSIPATION
16
12
8
4
0
- 50
- 25
0
25
50
75
100
2
0
-2
-4
-6
-8
- 10
- 12
- 14
1
TEMPERATURE (°C)
Document Number: 45168
Revision: 24-Feb-06
For technical questions, contact: [email protected]
10
100
1000
TIME (h)
www.vishay.com
43
Electrical Data and Dielectric Characteristics
Vishay
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
DIELECTRIC CHARACTERISTICS
DIELECTRIC ACCORDING TO EIA
According to CECC
C0G (NP0)
X7R
CG
C1 (2C1)
Capacitance Range:
at 1 MHz, 1 V; where C ≤ 1000 pF
10 pF to 1000 pF
-
at 1 kHz, 1 V; where C > 1000 pF
1200 pF to 3900 pF
100 pF to 0.047 µF
Tolerance on the Capacitance:
where C < 10 pF
-
-
where C > 10 pF
± 5 % (J); ± 10 % (K)
± 10 % (K); ± 20 % (M)
Rated DC Voltage
200 V; 500 V
200 V at 150 % of Vrated + 100 VDC
Dielectric Strength
500 V at 130 % of Vrated + 100 VDC
C < 0.01 µF: 10 000 MΩ min.
C ≥ 0.01 µF: 100 MΩ x µF min.
Insulation Resistance (IR)
0 x 10-6/K
-
± 30 x 10-6/K
-
-
± 15 %
at 1 MHz, 1 V; where C ≤ 1000 pF
1
---------------------------------400 + 20 x C
-
at 1 kHz, 1 V; where C > 1000 pF
≤ 0.1 %
Temperature Coefficient of the Capacitance
Tolerance of the Temperature Coefficient
Maximum Capacitance change with respect to
Capacitance at 25 °C
Dissipation Factor (DF)
Operating Temperature Range
≤ 2.5 %
- 55 °C to + 125 °C
Storage Temperature Range
25 °C ± 15 °C
Aging
-
typical 1 % per time decade
Note
• The capacitors meet the essential requirements of ‘EIA 198’.
Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at barometric pressures 650 mm to 800 mm of
mercury, and relative humidity not to exceed 75 %.
MAIN FEATURES
CLASS 1
CLASS 2
APPLICATION
For temperature compensation of frequency
discriminating circuits and filters, coupling and
decoupling in high frequency circuits where low
losses and narrow capacitance tolerances are
demanded.
PROPERTIES
Temperature
Dependence
Capacitance
High stability of capacitance. Low dissipation
factor up to higher frequencies. Defined
temperature coefficient of capacitance, positive or
negative, linear and reversible. High insulation
resistance. No voltage dependence. High longterm stability of electrical values.
High capacitance values with small dimensions.
Non-linear dependence of capacitance on
temperature.
C0G (NP0)
X7R
CG
2C1
As coupling and decoupling capacitors for such
application where higher losses and a reduced
capacitance stability are tolerated.
CLASSIFICATION
Classification EIA:
Classification CECC:
www.vishay.com
44
For technical questions, contact: [email protected]
Document Number: 45170
Revision: 21-Jun-07
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
TEMPERATURE CHARACTERISTICS OF CAPACITANCE FOR CLASS 2/3 CERAMIC DIELECTRICS
ACCORDING TO CECC 32100
CODE LETTER FOR
SUB CATEGORY
DESIGNATION OF THE SPECIFIED
TEMPERATURE RANGE
MAXIMUM CAPACITANCE CHANGE IN % AT THE
SPECIFIED TEMPERATURE RANGE
- 55 °C/+ 125 °C
WITHOUT RATED
VOLTAGE
WITH RATED
VOLTAGE
1
± 20 %
+ 20 %/- 30 %
X
2C
EIA - CODING SYSTEM FOR CLASS 2 CERAMIC
A
TYPE
X
7
WORKING TEMPERATURE RANGE
LOWER TEMP.
LIMIT
UPPER TEMP.
LIMIT
X = - 55 °C
7 = + 125 °C
R
103
M
CAPACITANCE CHANGE WITHIN
WORKING TEMP. RANGE
NO RATED VOLTAGE APPLIED
CAPACITANCE
IN pF
TOLERANCE
R = ± 15 %
The first two digits
gives the nominal
value, the third digit
indicates the number
of zeros, e.g. 103 =
10 000 pF
J=±5%
K = ± 10 %
M = ± 20 %
Example: Vishay BCcomponents Description
EIA Description
Document Number: 45170
Revision: 21-Jun-07
For technical questions, contact: [email protected]
www.vishay.com
45
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - NP0
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITANCE
2.0
1.5
1.0
0.5
0.0
- 0.5
NP0
- 1.0
- 1.5
- 2.0
- 100 - 75 - 50 - 25
0.2
0.1
0.0
- 0.1
- 0.2
0
25
50
75
100 125 150
0
10
20
TEMPERATURE (°C)
40
50
60
70
80
90
100
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
AGING RATE - NP0
10 000
0.2
ΔC CAPACITANCE CHANGE (%)
C
INSULATION RESISTANCE (ΩF)
30
1000
100
0.1
0.0
- 0.1
10
10
25
100 125
- 0.2
1
TEMPERATURE (°C)
www.vishay.com
46
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
Document Number: 45170
Revision: 21-Jun-07
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
X7R DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - X7R
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITANCE
15
10
5
0
X7R
-5
- 10
- 15
- 20
- 100 - 75 - 50 - 25
0
25
50
10
0
- 10
- 20
- 30
500 V
RATED
- 50
- 60
0
100 125 150
75
200 V
RATED
- 40
100
200
TEMPERATURE (°C)
300
400
500
600
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
INSULATION RESISTANCE (ΩF)
10 000
1000
100
10
10
25
100 125
TEMPERATURE (°C)
X7R
2.0
1.5
1.0
0.5
0.0
- 75
- 50 - 25
0
25
50
AGING RATE - X7R
ΔC CAPACITANCE CHANGE (%)
C
DISSIPATION
DISSIPATION FACTOR VS. TEMPERATURE
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
75
100
125
1.0
0.0
- 1.0
- 2.0
- 3.0
- 4.0
1
TEMPERATURE (°C)
Document Number: 45170
Revision: 21-Jun-07
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
www.vishay.com
47
Dimensions and Marking
Vishay
Multilayer Ceramic Dipped Radial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
DIMENSIONS
Wb
T
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
L2
H5
Component outline for
lead spacing 2.5 mm ± 0.8 mm
(straight leads)
Component outline for
lead spacing 5.0 mm ± 0.8 mm
(flat bent leads)
L2 and H5 are preferred styles
Wb
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
K2
K5
Component outline for
lead spacing 2.5 mm ± 0.8 mm
(outside kink)
Component outline for
lead spacing 5.0 mm ± 0.8 mm
(outside kink)
CAPACITOR DIMENSIONS AND WEIGHT in millimeter (inches)
MAX. SEATING HEIGHT (SH)
SIZE
Wbmax.
Hmax.
Tmax.
L2
H5
K2
K5
WEIGHT
(g)
15
4.0
(0.157)
4.0
(0.157)
2.5
(0.098)
1.58
(0.062)
2.54
(0.100)
3.50
(0.140)
3.50
(0.140)
≈ 0.15
20
5.0
(0.197)
5.0
(0.197)
3.2
(0.126)
1.58
(0.062)
2.54
(0.100)
3.50
(0.140)
3.50
(0.140)
≈ 0.16
Note
• Bulk packed types have a standard lead length L = 25.4 mm (1.0") minimum
• Thickness is defined as “T”
www.vishay.com
48
For technical questions, contact: [email protected]
Document Number: 45172
Revision: 18-Jan-06
Dimensions and Marking
Multilayer Ceramic Dipped Radial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
Vishay
MARKING
SIZE 15 CAPACITANCE VALUE < 100 pF
For example
Vishay logo or BC logo
X X
t
Vishay logo or BC logo
t: Tolerance code
8 2
J
XX: Capacitance code
J: ± 5 %
82: 82 pF
SIZE 15 CAPACITANCE VALUE ≥ 100 pF
For example
Vishay logo or BC logo
Vishay logo or BC logo
X X X
1 0 2
XXX: Capacitance code
102: 1000 pF
SIZE 20 CAPACITANCE VALUE ≥ 100 pF
For example
Vishay logo or BC logo
X X X
t
t: Tolerance code
XXX: Capacitance code
Vishay logo or BC logo
1 0 4
M
M: ± 20 %
104: 100 000 pF
Note
• Vishay or BCcomponents logo can be marked on the products body
Document Number: 45172
Revision: 18-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
49
Taping and Packaging
Vishay
Multilayer Ceramic Dipped Radial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
REEL DATA
REEL
A maximum of 0.5 % of the total number of capacitors per
reel may be missing.
55.1 Max.
+0
48 - 2.0
A maximum of 1 consecutive vacant positions is followed by
6 consecutive components.
355.6
Max.
Tape begins and ends with a minimum of 4 empty positions
(50 mm tape).
Maximum of 5 splicers per reel.
AMMOPACK DATA
A maximum of 0.5 % of the total number of capacitors per
box may be missing.
direction
of
unreeling
arbor hole
Ø 28 ± 1.5
A maximum of 2 consecutive vacant positions is followed by
6 consecutive components.
Tape begins and ends with a minimum of 4 empty positions
(50 mm tape).
Maximum of 5 splicers per reel.
REEL DIMENSIONS
H2
The cumulative pitch tolerance over 20 consecutive units is
not to exceed ± 1.0 mm.
Lead space (F) shall be measured at (3.6 ± 0.5) mm from the
capacitor seating plane.
LABELLING
L
Each reel is provided with a label showing the following
details:
Manufacturer, K style, capacitance, tolerance, batch
number, quantity of components, rated voltage, dielectric.
K
A
On special request other designations can be shown.
For example:
H1
REEL SIZE
(mm)
A
Outer Dia.
360
L
Hole Dia.
30
K
Core Dia.
90
H1
Internal Width
42
H2
External Width
51
AMMOPACK
290
335
50
www.vishay.com
50
For technical questions, contact: [email protected]
Document Number: 45173
Revision: 21-Mar-07
Taping and Packaging
Multilayer Ceramic Dipped Radial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
Vishay
PACKAGING QUANTITIES AND BOX DIMENSIONS
PACKAGING
SIZE CODE
SMALLEST PACKAGING
QUANTITY (SPQ)
BOX DIMENSIONS L x W x H
(mm)
15
4000
20
3000
Ammopack
15; 20
2500
335 x 290 x 50
Bulk (1)
15; 20
5000
245 x 120 x 65
Tape on reel
370 x 370 x 60
Note
(1) SPQ contains one or a multiple of poly-bags, 1000 units per bag
CAPACITORS ON TAPE
Δh
P
seating
plane
F
P1
H1
H0
H
L
W1
W
A
W0
L1
P0
D0
d
t
PARAMETER
SYMBOL
Cut off length
L
Lead end protrusion
Height to seating plane (straight leads)
Height to seating plane (formed leads)
DIMENSIONS
mm
inch
≤ 11
≤ 0.443
L1
≤1
≤ 0.039
H
≥ 18
≥ 0.709
H0
16 ± 0.5
0.630 ± 0.020
Top of component height
H1
≤ 32
≤ 1.260
Body inclination
Δh
0.0 ± 1.0
0 ± 0.039
Carrier tape width
W
18 + 1.0/- 0.5
0.709 + 0.039/- 0.020
Hold down tape width
W0
15 ref. (1)
0.591 ref. (1)
Sprocket hole position
W1
9 + 0.075/- 0.5
0.354 + 0.030/- 0.020
2.5 + 0.6/- 0.4
0.100 + 0.024/- 0.016
5.0 + 0.6/- 0.4
0.200 + 0.024/- 0.016
12.7 ± 0.3
0.500 ± 0.012
1e lead space (2)
2e lead space (2)
Sprocket hole pitch
1e sprocket hole centre to lead centre
2e sprocket hole centre to lead centre
F
P0
P1
5.08 ± 0.7
0.200 ± 0.028
3.85 ± 0.7
0.150 ± 0.028
0.157 ± 0.008
Sprocket hole diameter
D0
4.0 ± 0.2
Overall tape thickness
t
≤ 0.9
≤ 0.035
Wire lead diameter
d
0.5 ± 0.05
0.02 ± 0.002
Pitch
P
12.7 ± 1.0
0.50 ± 0.039
Notes
(1) Tape width of 6 mm (0.236") permissible
(2) e = 2.54 mm
Document Number: 45173
Revision: 21-Mar-07
For technical questions, contact: [email protected]
www.vishay.com
51
General Information
Vishay
Multilayer Ceramic Dipped Radial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
STORAGE
The capacitors must not be stored in a corrosive atmosphere where sulfide or chloride gas, acid, alkali, or salt are present.
Moisture exposure should also be avoided.
The solderability of the leads is not affected by storage of up to 24 months. Temperature + 10 °C to + 35 °C, relative humidity up
to 60 %.
With reference to class 2 ceramic dielectric capacitors, see the last page of this general information.
SOLDERING
SOLDERING SPECIFICATIONS
Soldering test for capacitors with wire leads: (According to IEC 60068-2-20, solder bath method)
Soldering temperature
Soldering duration
Distance from component body
SOLDERABILITY
RESISTANCE TO SOLDERING HEAT
235 °C ± 5 °C
260 °C ± 5 °C
2 s ± 0.5 s
10 s ± 1 s
≥ 2 mm
≥ 5 mm
SOLDERING RECOMMENDATIONS
Soldering of the component should be achieved using a Sn96.5/Ag3.0/Cu0.5, a Sn60/40 type or a silver-bearing type solder.
As ceramic capacitors are very sensitive to rapid changes in temperature (thermal shock), the solder heat resistance specification
(see above table) should not be exceeded.
Subjecting the capacitor to excessive heat may result in thermal shocks that can crack the ceramic body and melt the internal
solder junction.
CLEANING
The components should be cleaned with vapor degreasers immediately following the soldering operation.
SOLVENT RESISTANCE AND FLAME ABILITY
The coating and marking of the capacitors are resistant to the following test method: IEC 60068-2-45 (Method XA). The epoxy
material is approved according to UL 94 V-0.
MOUNTING
We do not recommend modifying the lead terminals, e.g. bending or cropping as this action could break the coating or crack the
ceramic insert. However, if the lead must be modified in such a way, we recommend supporting the lead with a clamping fixture
next to the coating.
www.vishay.com
52
For technical questions, contact: [email protected]
Document Number: 45174
Revision: 26-Sep-07
General Information
Multilayer Ceramic Dipped Radial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
Vishay
CAPACITANCE “AGING” OF CERAMIC CAPACITORS
Following the final heat treatment, all class 2 ceramic capacitors reduce their capacitance value. According to logarithmic law,
this is due to their special crystalline construction. This change is called “aging”. If the capacitors are heat treated (for example
when soldering), the capacitance increases again to a higher value deaging, and the aging process begins again.
Note
• The level of this deaging is dependent on the temperature and the duration of the heat; an almost complete deaging is achieved at 150 °C in
one hour. These conditions also form the basis for reference measurements when testing. The capacitance change per time decade (aging
constant) differs for the various types of ceramic, but typical values can be taken from the equations below.
100 x ( C 11 - C 12 )
k = ---------------------------------------------C 11 x log 10 ( t 2 /t 1 )
t1, t2 = measuring time point (h)
C11, C12 = capacitance values for the times t1, t2
C 12 = C 11 x ( 1 - k/100 x log 10 ( t 2 /t 1 ) )
k = aging constant (%)
REFERENCE MEASUREMENT
Due to aging, it is necessary to quote an age for reference measurements which can be related to the capacitance with fixed
tolerance. According to EN 130700, this time period is 1000 h.
If the shelf-life of the capacitor is known, the capacitance for t = 1000 h can be calculated with the aging constant.
In order to avoid the influence of aging, it is important to deage the capacitors before stress-testing. The following procedure is
adopted (see also EN 130700):
• Deaging at 125 °C, 1 h
• Storage for 24 h at normal climate temperature
• Initial measurement
• Stress
• Deaging at 125 °C, 1 h
• Storage for 24 h at normal climate temperature
• Final measurement
Document Number: 45174
Revision: 26-Sep-07
For technical questions, contact: [email protected]
www.vishay.com
53
General Information
Multilayer Ceramic Dipped Radial Capacitors
50 VDC, 100 VDC, 200 VDC and 500 VDC
Vishay
CAUTION
1. OPERATING VOLTAGE AND FREQUENCY CHARACTERISTIC
When sinusiodal or ripple voltage applied to DC Ceramic Disc Capacitors, be sure to maintain the peak-to-peak value or the peak
value of the sum of both AC + DC within the rated voltage.
When start or stop applying the voltage, resonance may generate irregular voltage.
When rectangular or Pulse Wave Voltage is applied to DC Ceramic Disc Capacitors, the self-heating generated by the capacitor
is higher than the sinusoidal application with the same frequency. The allowable voltage rating for the rectangular or pulse wave
corresponds approximately with the allowable voltage of a sinusoidal wave with the double fundamental frequency.
The allowable voltage varies, depending on the voltage and the waveform.
Diagrams of the limiting values are available for each capacitor series on request.
VOLTAGE
Waveform
Figure
DC
V0-p
DC + AC
Vp-p
V0-p
0
AC
0
0
2. OPERATING TEMPERATURE AND SELF-GENERATED HEAT
The surface temperature of the capacitors must not exceed the upper limit of its Rated Operating Temperature.
During operation in a high-frequency circuit or a pulse signal circuit, the capacitor itself generates heat due to dielectric losses.
Applied voltage should be the load such as self-generated heat is within 20 °C on the condition of environmental temperature
25 °C.
Note, that excessive heat may lead to deterioration of the capacitor’s characteristics.
www.vishay.com
54
For technical questions, contact: [email protected]
Document Number: 45174
Revision: 26-Sep-07
Mono-Kap
Vishay
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
DIMENSIONS
Wb
T
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
L2
H5
Component outline for
lead spacing 2.5 mm ± 0.8 mm
(straight leads)
Component outline for
lead spacing 5.0 mm ± 0.8 mm
(flat bent leads)
L2 and H5 are preferred styles
Wb
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
K2
K5
Component outline for
lead spacing 2.5 mm ± 0.8 mm
(outside kink)
Component outline for
lead spacing 5.0 mm ± 0.8 mm
(outside kink)
CAPACITOR DIMENSIONS AND WEIGHT in millimeter (inches)
MAX. SEATING HEIGHT (SH)
SIZE
Wbmax.
Hmax.
Tmax.
L2
H5
K2
K5
WEIGHT
(g)
15
4.0
(0.157)
4.0
(0.157)
2.5
(0.098)
1.58
(0.062)
2.54
(0.100)
3.50
(0.140)
3.50
(0.140)
≈ 0.15
20
5.0
(0.197)
5.0
(0.197)
3.2
(0.126)
1.58
(0.062)
2.54
(0.100)
3.50
(0.140)
3.50
(0.140)
≈ 0.16
Note
• Bulk packed types have a standard lead length L = 25.4 mm (1.0") minimum
• Thickness is defined as “T”
Document Number: 45175
Revision: 16-Nov-09
For technical questions, contact: [email protected]
www.vishay.com
55
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Capacitance range
10 pF to 8200 pF
Rated DC voltage
50 V
Tolerance on capacitance
100 pF to 1.0 µF
100 V
50 V
0.1 µF to 1.0 µF
100 V
50 V
100 V
± 5 %, ± 10 %
± 10 %, ± 20 %
+ 80 %/- 20 %
C0G (NP0)
X7R
Y5V
Dielectric Code
ORDERING INFORMATION
K
103
K
15
X7R
F
5
3
H
5
PRODUCT
TYPE
CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
SIZE
CODE
TEMP.
CHAR.
RATED
VOLTAGE
LEAD
DIA.
LEAD LENGTH/
PACKAGING
LEAD
STYLE
LEAD
SPACING
K=
Mono-Kap
Two significant
digits followed by
the number of
zeros.
For example:
103 = 10 000 pF
J=±5%
K = ± 10 %
M = ± 20 %
Z = + 80 %/- 20 %
Ref.
mech.
spec.
C0G
X7R
Y5V
F=
50 VDC
H=
100 VDC
5=
0.5 mm
(0.20")
3 = Bulk, with lead
length of 30 mm
± 5.0 mm (1.25")
T = Tape and reel
U = Ammopack
L=
Straight
Lead
H=
High
seated
assy
2=
2.5 mm
(0.100")
5=
5.0 mm
(0.200")
Ordering Example: K-103-K-15-X7R-F-5-3-H-5
www.vishay.com
56
For technical questions, contact: [email protected]
Document Number: 45175
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
CAPACITANCE RANGE CHART
C0G (NP0) DIELECTRIC
SIZE
RATED VOLTAGE
VALUE
CODE
10 pF
100
12 pF
120
15 pF
150
18 pF
180
22 pF
220
27 pF
270
33 pF
330
39 pF
390
47 pF
470
56 pF
560
68 pF
680
82 pF
820
100 pF
101
120 pF
121
150 pF
151
180 pF
181
220 pF
221
270 pF
271
330 pF
331
390 pF
391
470 pF
471
560 pF
561
680 pF
681
820 pF
821
1000 pF
102
1200 pF
122
1500 pF
152
1800 pF
182
2200 pF
222
2700 pF
272
3300 pF
332
3900 pF
392
4700 pF
472
5600 pF
562
6800 pF
682
8200 pF
822
0.01 µF
103
X7R DIELECTRIC
15
20
50
100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Y5V DIELECTRIC
SIZE
RATED VOLTAGE
VALUE
CODE
0.01 µF
103
0.015 µF
153
0.022 µF
223
0.033 µF
333
0.047 µF
473
0.068 µF
683
0.10 µF
104
0.15 µF
154
0.22 µF
224
0.33 µF
334
0.47 µF
474
0.68 µF
684
1.0 µF
105
Document Number: 45175
Revision: 16-Nov-09
15
50
20
100
50
100
SIZE
RATED VOLTAGE
VALUE
CODE
100 pF
101
120 pF
121
150 pF
151
180 pF
181
220 pF
221
270 pF
271
330 pF
331
390 pF
391
470 pF
471
560 pF
561
680 pF
681
820 pF
821
1000 pF
102
1200 pF
122
1500 pF
152
1800 pF
182
2200 pF
222
2700 pF
272
3300 pF
332
3900 pF
392
4700 pF
472
5600 pF
562
6800 pF
682
8200 pF
822
0.01 µF
103
0.012 µF
123
0.015 µF
153
0.018 µF
183
0.022 µF
223
0.027 µF
273
0.033 µF
333
0.039 µF
393
0.047 µF
473
0.056 µF
563
0.068 µF
683
0.082 µF
823
0.10 µF
104
0.12 µF
124
0.15 µF
154
0.22 µF
224
0.33 µF
334
0.47 µF
474
0.68 µF
684
1.0 µF
105
For technical questions, contact: [email protected]
15
20
50
100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
•
•
•
•
•
•
100
•
•
•
•
•
•
•
•
•
•
www.vishay.com
57
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
PART NUMBER LISTING - if not in range chart, please contact [email protected]
MONO-KAP Y5V - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
+ 80 %/- 20 % TOLERANCE
13th digit (T = Reel, U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
10 000
K103Z15Y5VF5.L2
2.5 (0.10)
10 000
K103Z15Y5VF5.H5
5.0 (0.20)
15 000
K153Z15Y5VF5.L2
2.5 (0.10)
15 000
K153Z15Y5VF5.H5
5.0 (0.20)
22 000
K223Z15Y5VF5.L2
2.5 (0.10)
22 000
K223Z15Y5VF5.H5
5.0 (0.20)
33 000
K333Z15Y5VF5.L2
2.5 (0.10)
33 000
K333Z15Y5VF5.H5
5.0 (0.20)
47 000
K473Z15Y5VF5.L2
2.5 (0.10)
47 000
K473Z15Y5VF5.H5
5.0 (0.20)
68 000
K683Z15Y5VF5.L2
2.5 (0.10)
68 000
K683Z15Y5VF5.H5
5.0 (0.20)
100 000
K104Z15Y5VF5.L2
2.5 (0.10)
50
100 000
K104Z15Y5VF5.H5
5.0 (0.20)
150 000
K154Z15Y5VF5.L2
2.5 (0.10)
150 000
K154Z15Y5VF5.H5
5.0 (0.20)
220 000
K224Z15Y5VF5.L2
2.5 (0.10)
220 000
K224Z15Y5VF5.H5
5.0 (0.20)
330 000
K334Z20Y5VF5.L2
2.5 (0.10)
330 000
K334Z20Y5VF5.H5
5.0 (0.20)
470 000
K474Z20Y5VF5.L2
2.5 (0.10)
470 000
K474Z20Y5VF5.H5
5.0 (0.20)
680 000
K684Z20Y5VF5.L2
2.5 (0.10)
680 000
K684Z20Y5VF5.H5
5.0 (0.20)
1 000 000
K105Z20Y5VF5.L2
2.5 (0.10)
1 000 000
K105Z20Y5VF5.H5
5.0 (0.20)
MONO-KAP X7R - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
20 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
100
K101K15X7RF5.L2
K101M15X7RF5.L2
2.5 (0.10)
100
K101K15X7RF5.H5
K101M15X7RF5.H5
5.0 (0.20)
120
K121K15X7RF5.L2
K121M15X7RF5.L2
2.5 (0.10)
120
K121K15X7RF5.H5
K121M15X7RF5.H5
5.0 (0.20)
150
K151K15X7RF5.L2
K151M15X7RF5.L2
2.5 (0.10)
150
K151K15X7RF5.H5
K151M15X7RF5.H5
5.0 (0.20)
180
180
50
K181K15X7RF5.L2
K181M15X7RF5.L2
2.5 (0.10)
K181K15X7RF5.H5
K181M15X7RF5.H5
5.0 (0.20)
220
K221K15X7RF5.L2
K221M15X7RF5.L2
2.5 (0.10)
220
K221K15X7RF5.H5
K221M15X7RF5.H5
5.0 (0.20)
270
K271K15X7RF5.L2
K271M15X7RF5.L2
2.5 (0.10)
270
K271K15X7RF5.H5
K271M15X7RF5.H5
5.0 (0.20)
330
K331K15X7RF5.L2
K331M15X7RF5.L2
2.5 (0.10)
330
K331K15X7RF5.H5
K331M15X7RF5.H5
5.0 (0.20)
www.vishay.com
58
For technical questions, contact: [email protected]
Document Number: 45175
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
MONO-KAP X7R - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
20 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
2.5 (0.10)
390
K391K15X7RF5.L2
K391M15X7RF5.L2
390
K391K15X7RF5.H5
K391M15X7RF5.H5
5.0 (0.20)
470
K471K15X7RF5.L2
K471M15X7RF5.L2
2.5 (0.10)
470
K471K15X7RF5.H5
K471M15X7RF5.H5
5.0 (0.20)
560
K561K15X7RF5.L2
K561M15X7RF5.L2
2.5 (0.10)
560
K561K15X7RF5.H5
K561M15X7RF5.H5
5.0 (0.20)
680
K681K15X7RF5.L2
K681M15X7RF5.L2
2.5 (0.10)
680
K681K15X7RF5.H5
K681M15X7RF5.H5
5.0 (0.20)
2.5 (0.10)
820
K821K15X7RF5.L2
K821M15X7RF5.L2
820
K821K15X7RF5.H5
K821M15X7RF5.H5
5.0 (0.20)
1000
K102K15X7RF5.L2
K102M15X7RF5.L2
2.5 (0.10)
1000
K102K15X7RF5.H5
K102M15X7RF5.H5
5.0 (0.20)
1200
K122K15X7RF5.L2
K122M15X7RF5.L2
2.5 (0.10)
1200
K122K15X7RF5.H5
K122M15X7RF5.H5
5.0 (0.20)
1500
K152K15X7RF5.L2
K152M15X7RF5.L2
2.5 (0.10)
1500
K152K15X7RF5.H5
K152M15X7RF5.H5
5.0 (0.20)
2.5 (0.10)
1800
K182K15X7RF5.L2
K182M15X7RF5.L2
1800
K182K15X7RF5.H5
K182M15X7RF5.H5
5.0 (0.20)
2200
K222K15X7RF5.L2
K222M15X7RF5.L2
2.5 (0.10)
2200
K222K15X7RF5.H5
K222M15X7RF5.H5
5.0 (0.20)
2700
K272K15X7RF5.L2
K272M15X7RF5.L2
2.5 (0.10)
2700
K272K15X7RF5.H5
K272M15X7RF5.H5
5.0 (0.20)
3300
K332K15X7RF5.L2
K332M15X7RF5.L2
2.5 (0.10)
K332K15X7RF5.H5
K332M15X7RF5.H5
5.0 (0.20)
2.5 (0.10)
3300
50
3900
K392K15X7RF5.L2
K392M15X7RF5.L2
3900
K392K15X7RF5.H5
K392M15X7RF5.H5
5.0 (0.20)
4700
K472K15X7RF5.L2
K472M15X7RF5.L2
2.5 (0.10)
4700
K472K15X7RF5.H5
K472M15X7RF5.H5
5.0 (0.20)
5600
K562K15X7RF5.L2
K562M15X7RF5.L2
2.5 (0.10)
5600
K562K15X7RF5.H5
K562M15X7RF5.H5
5.0 (0.20)
6800
K682K15X7RF5.L2
K682M15X7RF5.L2
2.5 (0.10)
6800
K682K15X7RF5.H5
K682M15X7RF5.H5
5.0 (0.20)
2.5 (0.10)
8200
K822K15X7RF5.L2
K822M15X7RF5.L2
8200
K822K15X7RF5.H5
K822M15X7RF5.H5
5.0 (0.20)
10 000
K103K15X7RF5.L2
K103M15X7RF5.L2
2.5 (0.10)
10 000
K103K15X7RF5.H5
K103M15X7RF5.H5
5.0 (0.20)
12 000
K123K15X7RF5.L2
K123M15X7RF5.L2
2.5 (0.10)
12 000
K123K15X7RF5.H5
K123M15X7RF5.H5
5.0 (0.20)
15 000
K153K15X7RF5.L2
K153M15X7RF5.L2
2.5 (0.10)
15 000
K153K15X7RF5.H5
K153M15X7RF5.H5
5.0 (0.20)
2.5 (0.10)
18 000
K183K15X7RF5.L2
K183M15X7RF5.L2
18 000
K183K15X7RF5.H5
K183M15X7RF5.H5
5.0 (0.20)
22 000
K223K15X7RF5.L2
K223M15X7RF5.L2
2.5 (0.10)
22 000
K223K15X7RF5.H5
K223M15X7RF5.H5
5.0 (0.20)
27 000
K273K15X7RF5.L2
K273M15X7RF5.L2
2.5 (0.10)
27 000
K273K15X7RF5.H5
K273M15X7RF5.H5
5.0 (0.20)
Document Number: 45175
Revision: 16-Nov-09
For technical questions, contact: [email protected]
www.vishay.com
59
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
MONO-KAP X7R - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
20 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
33 000
K333K15X7RF5.L2
K333M15X7RF5.L2
2.5 (0.10)
33 000
K333K15X7RF5.H5
K333M15X7RF5.H5
5.0 (0.20)
39 000
K393K15X7RF5.L2
K393M15X7RF5.L2
2.5 (0.10)
39 000
K393K15X7RF5.H5
K393M15X7RF5.H5
5.0 (0.20)
47 000
K473K15X7RF5.L2
K473M15X7RF5.L2
2.5 (0.10)
47 000
K473K15X7RF5.H5
K473M15X7RF5.H5
5.0 (0.20)
56 000
K563K15X7RF5.L2
K563M15X7RF5.L2
2.5 (0.10)
56 000
K563K15X7RF5.H5
K563M15X7RF5.H5
5.0 (0.20)
68 000
K683K15X7RF5.L2
K683M15X7RF5.L2
2.5 (0.10)
68 000
K683K15X7RF5.H5
K683M15X7RF5.H5
5.0 (0.20)
82 000
K823K15X7RF5.L2
K823M15X7RF5.L2
2.5 (0.10)
82 000
K823K15X7RF5.H5
K823M15X7RF5.H5
5.0 (0.20)
100 000
100 000
50
K104K15X7RF5.L2
K104M15X7RF5.L2
2.5 (0.10)
K104K15X7RF5.H5
K104M15X7RF5.H5
5.0 (0.20)
150 000
K154K20X7RF5.L2
K154M20X7RF5.L2
2.5 (0.10)
150 000
K154K20X7RF5.H5
K154M20X7RF5.H5
5.0 (0.20)
220 000
K224K20X7RF5.L2
K224M20X7RF5.L2
2.5 (0.10)
220 000
K224K20X7RF5.H5
K224M20X7RF5.H5
5.0 (0.20)
330 000
K334K20X7RF5.L2
K334M20X7RF5.L2
2.5 (0.10)
330 000
K334K20X7RF5.H5
K334M20X7RF5.H5
5.0 (0.20)
470 000
K474K20X7RF5.L2
K474M20X7RF5.L2
2.5 (0.10)
470 000
K474K20X7RF5.H5
K474M20X7RF5.H5
5.0 (0.20)
680 000
K684K20X7RF5.L2
K684M20X7RF5.L2
2.5 (0.10)
680 000
K684K20X7RF5.H5
K684M20X7RF5.H5
5.0 (0.20)
1 000 000
K105K20X7RF5.L2
K105M20X7RF5.L2
2.5 (0.10)
1 000 000
K105K20X7RF5.H5
K105M20X7RF5.H5
5.0 (0.20)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
MONO-KAP C0G - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
10
K100J15C0GF5.L2
K100K15C0GF5.L2
2.5 (0.10)
10
K100J15C0GF5.H5
K100K15C0GF5.H5
5.0 (0.20)
12
K120J15C0GF5.L2
K120K15C0GF5.L2
2.5 (0.10)
12
K120J15C0GF5.H5
K120K15C0GF5.H5
5.0 (0.20)
15
K150J15C0GF5.L2
K150K15C0GF5.L2
2.5 (0.10)
15
K150J15C0GF5.H5
K150K15C0GF5.H5
5.0 (0.20)
18
K180J15C0GF5.L2
K180K15C0GF5.L2
2.5 (0.10)
18
K180J15C0GF5.H5
K180K15C0GF5.H5
5.0 (0.20)
22
22
50
K220J15C0GF5.L2
K220K15C0GF5.L2
2.5 (0.10)
K220J15C0GF5.H5
K220K15C0GF5.H5
5.0 (0.20)
27
K270J15C0GF5.L2
K270K15C0GF5.L2
2.5 (0.10)
27
K270J15C0GF5.H5
K270K15C0GF5.H5
5.0 (0.20)
33
K330J15C0GF5.L2
K330K15C0GF5.L2
2.5 (0.10)
33
K330J15C0GF5.H5
K330K15C0GF5.H5
5.0 (0.20)
39
K390J15C0GF5.L2
K390K15C0GF5.L2
2.5 (0.10)
39
K390J15C0GF5.H5
K390K15C0GF5.H5
5.0 (0.20)
www.vishay.com
60
For technical questions, contact: [email protected]
Document Number: 45175
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
MONO-KAP C0G - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
2.5 (0.10)
47
K470J15C0GF5.L2
K470K15C0GF5.L2
47
K470J15C0GF5.H5
K470K15C0GF5.H5
5.0 (0.20)
56
K560J15C0GF5.L2
K560K15C0GF5.L2
2.5 (0.10)
56
K560J15C0GF5.H5
K560K15C0GF5.H5
5.0 (0.20)
68
K680J15C0GF5.L2
K680K15C0GF5.L2
2.5 (0.10)
68
K680J15C0GF5.H5
K680K15C0GF5.H5
5.0 (0.20)
82
K820J15C0GF5.L2
K820K15C0GF5.L2
2.5 (0.10)
82
K820J15C0GF5.H5
K820K15C0GF5.H5
5.0 (0.20)
2.5 (0.10)
100
K101J15C0GF5.L2
K101K15C0GF5.L2
100
K101J15C0GF5.H5
K101K15C0GF5.H5
5.0 (0.20)
120
K121J15C0GF5.L2
K121K15C0GF5.L2
2.5 (0.10)
120
K121J15C0GF5.H5
K121K15C0GF5.H5
5.0 (0.20)
150
K151J15C0GF5.L2
K151K15C0GF5.L2
2.5 (0.10)
150
K151J15C0GF5.H5
K151K15C0GF5.H5
5.0 (0.20)
180
K181J15C0GF5.L2
K181K15C0GF5.L2
2.5 (0.10)
180
K181J15C0GF5.H5
K181K15C0GF5.H5
5.0 (0.20)
2.5 (0.10)
220
K221J15C0GF5.L2
K221K15C0GF5.L2
220
K221J15C0GF5.H5
K221K15C0GF5.H5
5.0 (0.20)
270
K271J15C0GF5.L2
K271K15C0GF5.L2
2.5 (0.10)
270
K271J15C0GF5.H5
K271K15C0GF5.H5
5.0 (0.20)
330
K331J15C0GF5.L2
K331K15C0GF5.L2
2.5 (0.10)
330
K331J15C0GF5.H5
K331K15C0GF5.H5
5.0 (0.20)
390
K391J15C0GF5.L2
K391K15C0GF5.L2
2.5 (0.10)
K391J15C0GF5.H5
K391K15C0GF5.H5
5.0 (0.20)
2.5 (0.10)
390
50
470
K471J15C0GF5.L2
K471K15C0GF5.L2
470
K471J15C0GF5.H5
K471K15C0GF5.H5
5.0 (0.20)
560
K561J15C0GF5.L2
K561K15C0GF5.L2
2.5 (0.10)
560
K561J15C0GF5.H5
K561K15C0GF5.H5
5.0 (0.20)
680
K681J15C0GF5.L2
K681K15C0GF5.L2
2.5 (0.10)
680
K681J15C0GF5.H5
K681K15C0GF5.H5
5.0 (0.20)
820
K821J15C0GF5.L2
K821K15C0GF5.L2
2.5 (0.10)
820
K821J15C0GF5.H5
K821K15C0GF5.H5
5.0 (0.20)
2.5 (0.10)
1000
K102J15C0GF5.L2
K102K15C0GF5.L2
1000
K102J15C0GF5.H5
K102K15C0GF5.H5
5.0 (0.20)
1200
K122J15C0GF5.L2
K122K15C0GF5.L2
2.5 (0.10)
1200
K122J15C0GF5.H5
K122K15C0GF5.H5
5.0 (0.20)
1500
K152J15C0GF5.L2
K152K15C0GF5.L2
2.5 (0.10)
1500
K152J15C0GF5.H5
K152K15C0GF5.H5
5.0 (0.20)
1800
K182J15C0GF5.L2
K182K15C0GF5.L2
2.5 (0.10)
1800
K182J15C0GF5.H5
K182K15C0GF5.H5
5.0 (0.20)
2.5 (0.10)
2200
K222J15C0GF5.L2
K222K15C0GF5.L2
2200
K222J15C0GF5.H5
K222K15C0GF5.H5
5.0 (0.20)
2700
K272J20C0GF5.L2
K272K20C0GF5.L2
2.5 (0.10)
2700
K272J20C0GF5.H5
K272K20C0GF5.H5
5.0 (0.20)
3300
K332J20C0GF5.L2
K332K20C0GF5.L2
2.5 (0.10)
3300
K332J20C0GF5.H5
K332K20C0GF5.H5
5.0 (0.20)
Document Number: 45175
Revision: 16-Nov-09
For technical questions, contact: [email protected]
www.vishay.com
61
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
MONO-KAP C0G - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
3900
K392J20C0GF5.L2
K392K20C0GF5.L2
2.5 (0.10)
3900
K392J20C0GF5.H5
K392K20C0GF5.H5
5.0 (0.20)
4700
K472J20C0GF5.L2
K472K20C0GF5.L2
2.5 (0.10)
4700
K472J20C0GF5.H5
K472K20C0GF5.H5
5.0 (0.20)
5600
K562J20C0GF5.L2
K562K20C0GF5.L2
2.5 (0.10)
5600
K562J20C0GF5.H5
K562K20C0GF5.H5
5.0 (0.20)
6800
50
6800
K682J20C0GF5.L2
K682K20C0GF5.L2
2.5 (0.10)
K682J20C0GF5.H5
K682K20C0GF5.H5
5.0 (0.20)
8200
K822J20C0GF5.L2
K822K20C0GF5.L2
2.5 (0.10)
8200
K822J20C0GF5.H5
K822K20C0GF5.H5
5.0 (0.20)
10 000
K103J20C0GF5.L2
K103K20C0GF5.L2
2.5 (0.10)
10 000
K103J20C0GF5.H5
K103K20C0GF5.H5
5.0 (0.20)
MONO-KAP Y5V - 100 VDC CLEAR TEXT CODE
+ 80 %/- 20 % TOLERANCE
13th digit (T = Reel, U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
10 000
K103Z15Y5VH53L2
2.5 (0.10)
10 000
K103Z15Y5VH53H5
5.0 (0.20)
15 000
K153Z15Y5VH53L2
2.5 (0.10)
15 000
K153Z15Y5VH53H5
5.0 (0.20)
22 000
K223Z15Y5VH53L2
2.5 (0.10)
22 000
K223Z15Y5VH53H5
5.0 (0.20)
33 000
K333Z15Y5VH53L2
2.5 (0.10)
33 000
K333Z15Y5VH53H5
5.0 (0.20)
47 000
K473Z15Y5VH53L2
2.5 (0.10)
CAPACITANCE (pF)
47 000
RATED VOLTAGE (VDC)
100
K473Z15Y5VH53H5
5.0 (0.20)
68 000
K683Z15Y5VH53L2
2.5 (0.10)
68 000
K683Z15Y5VH53H5
5.0 (0.20)
100 000
K104Z15Y5VH53L2
2.5 (0.10)
100 000
K104Z15Y5VH53H5
5.0 (0.20)
150 000
K154Z20Y5VH53L2
2.5 (0.10)
150 000
K154Z20Y5VH53H5
5.0 (0.20)
220 000
K224Z20Y5VH53L2
2.5 (0.10)
220 000
K224Z20Y5VH53H5
5.0 (0.20)
www.vishay.com
62
For technical questions, contact: [email protected]
Document Number: 45175
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
MONO-KAP X7R - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
20 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
2.5 (0.10)
100
K101K15X7RH5.L2
K101M15X7RH5.L2
100
K101K15X7RH5.H5
K101M15X7RH5.H5
5.0 (0.20)
120
K121K15X7RH5.L2
K121M15X7RH5.L2
2.5 (0.10)
120
K121K15X7RH5.H5
K121M15X7RH5.H5
5.0 (0.20)
2.5 (0.10)
150
K151K15X7RH5.L2
K151M15X7RH5.L2
150
K151K15X7RH5.H5
K151M15X7RH5.H5
5.0 (0.20)
180
K181K15X7RH5.L2
K181M15X7RH5.L2
2.5 (0.10)
180
K181K15X7RH5.H5
K181M15X7RH5.H5
5.0 (0.20)
220
K221K15X7RH5.L2
K221M15X7RH5.L2
2.5 (0.10)
220
K221K15X7RH5.H5
K221M15X7RH5.H5
5.0 (0.20)
270
K271K15X7RH5.L2
K271M15X7RH5.L2
2.5 (0.10)
270
K271K15X7RH5.H5
K271M15X7RH5.H5
5.0 (0.20)
2.5 (0.10)
330
K331K15X7RH5.L2
K331M15X7RH5.L2
330
K331K15X7RH5.H5
K331M15X7RH5.H5
5.0 (0.20)
390
K391K15X7RH5.L2
K391M15X7RH5.L2
2.5 (0.10)
390
K391K15X7RH5.H5
K391M15X7RH5.H5
5.0 (0.20)
470
K471K15X7RH5.L2
K471M15X7RH5.L2
2.5 (0.10)
470
K471K15X7RH5.H5
K471M15X7RH5.H5
5.0 (0.20)
560
K561K15X7RH5.L2
K561M15X7RH5.L2
2.5 (0.10)
560
K561K15X7RH5.H5
K561M15X7RH5.H5
5.0 (0.20)
2.5 (0.10)
680
K681K15X7RH5.L2
K681M15X7RH5.L2
680
K681K15X7RH5.H5
K681M15X7RH5.H5
5.0 (0.20)
820
K821K15X7RH5.L2
K821M15X7RH5.L2
2.5 (0.10)
820
100
K821K15X7RH5.H5
K821M15X7RH5.H5
5.0 (0.20)
1000
K102K15X7RH5.L2
K102M15X7RH5.L2
2.5 (0.10)
1000
K102K15X7RH5.H5
K102M15X7RH5.H5
5.0 (0.20)
1200
K122K15X7RH5.L2
K122M15X7RH5.L2
2.5 (0.10)
1200
K122K15X7RH5.H5
K122M15X7RH5.H5
5.0 (0.20)
2.5 (0.10)
1500
K152K15X7RH5.L2
K152M15X7RH5.L2
1500
K152K15X7RH5.H5
K152M15X7RH5.H5
5.0 (0.20)
1800
K182K15X7RH5.L2
K182M15X7RH5.L2
2.5 (0.10)
1800
K182K15X7RH5.H5
K182M15X7RH5.H5
5.0 (0.20)
2200
K222K15X7RH5.L2
K222M15X7RH5.L2
2.5 (0.10)
2200
K222K15X7RH5.H5
K222M15X7RH5.H5
5.0 (0.20)
2700
K272K15X7RH5.L2
K272M15X7RH5.L2
2.5 (0.10)
2700
K272K15X7RH5.H5
K272M15X7RH5.H5
5.0 (0.20)
2.5 (0.10)
3300
K332K15X7RH5.L2
K332M15X7RH5.L2
3300
K332K15X7RH5.H5
K332M15X7RH5.H5
5.0 (0.20)
3900
K392K15X7RH5.L2
K392M15X7RH5.L2
2.5 (0.10)
3900
K392K15X7RH5.H5
K392M15X7RH5.H5
5.0 (0.20)
4700
K472K15X7RH5.L2
K472M15X7RH5.L2
2.5 (0.10)
4700
K472K15X7RH5.H5
K472M15X7RH5.H5
5.0 (0.20)
5600
K562K15X7RH5.L2
K562M15X7RH5.L2
2.5 (0.10)
5600
K562K15X7RH5.H5
K562M15X7RH5.H5
5.0 (0.20)
6800
K682K15X7RH5.L2
K682M15X7RH5.L2
2.5 (0.10)
6800
K682K15X7RH5.H5
K682M15X7RH5.H5
5.0 (0.20)
Document Number: 45175
Revision: 16-Nov-09
For technical questions, contact: [email protected]
www.vishay.com
63
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
MONO-KAP X7R - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
20 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
2.5 (0.10)
8200
K822K15X7RH5.L2
K822M15X7RH5.L2
8200
K822K15X7RH5.H5
K822M15X7RH5.H5
5.0 (0.20)
10 000
K103K15X7RH5.L2
K103M15X7RH5.L2
2.5 (0.10)
10 000
K103K15X7RH5.H5
K103M15X7RH5.H5
5.0 (0.20)
12 000
K123K15X7RH5.L2
K123M15X7RH5.L2
2.5 (0.10)
12 000
K123K15X7RH5.H5
K123M15X7RH5.H5
5.0 (0.20)
15 000
K153K15X7RH5.L2
K153M15X7RH5.L2
2.5 (0.10)
15 000
K153K15X7RH5.H5
K153M15X7RH5.H5
5.0 (0.20)
18 000
K183K15X7RH5.L2
K183M15X7RH5.L2
2.5 (0.10)
18 000
K183K15X7RH5.H5
K183M15X7RH5.H5
5.0 (0.20)
22 000
K223K15X7RH5.L2
K223M15X7RH5.L2
2.5 (0.10)
22 000
K223K15X7RH5.H5
K223M15X7RH5.H5
5.0 (0.20)
27 000
K273K20X7RH5.L2
K273M20X7RH5.L2
2.5 (0.10)
27 000
K273K20X7RH5.H5
K273M20X7RH5.H5
5.0 (0.20)
33 000
100
33 000
K333K20X7RH5.L2
K333M20X7RH5.L2
2.5 (0.10)
K333K20X7RH5.H5
K333M20X7RH5.H5
5.0 (0.20)
39 000
K393K20X7RH5.L2
K393M20X7RH5.L2
2.5 (0.10)
39 000
K393K20X7RH5.H5
K393M20X7RH5.H5
5.0 (0.20)
47 000
K473K20X7RH5.L2
K473M20X7RH5.L2
2.5 (0.10)
47 000
K473K20X7RH5.H5
K473M20X7RH5.H5
5.0 (0.20)
56 000
K563K20X7RH5.L2
K563M20X7RH5.L2
2.5 (0.10)
56 000
K563K20X7RH5.H5
K563M20X7RH5.H5
5.0 (0.20)
68 000
K683K20X7RH5.L2
K683M20X7RH5.L2
2.5 (0.10)
68 000
K683K20X7RH5.H5
K683M20X7RH5.H5
5.0 (0.20)
82 000
K823K20X7RH5.L2
K823M20X7RH5.L2
2.5 (0.10)
82 000
K823K20X7RH5.H5
K823M20X7RH5.H5
5.0 (0.20)
100 000
K104K20X7RH5.L2
K104M20X7RH5.L2
2.5 (0.10)
100 000
K104K20X7RH5.H5
K104M20X7RH5.H5
5.0 (0.20)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
2.5 (0.10)
MONO-KAP C0G - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
10
K100J15C0GH5.L2
K100K15C0GH5.L2
10
K100J15C0GH5.H5
K100K15C0GH5.H5
5.0 (0.20)
12
K120J15C0GH5.L2
K120K15C0GH5.L2
2.5 (0.10)
12
K120J15C0GH5.H5
K120K15C0GH5.H5
5.0 (0.20)
15
K150J15C0GH5.L2
K150K15C0GH5.L2
2.5 (0.10)
K150J15C0GH5.H5
K150K15C0GH5.H5
5.0 (0.20)
K180J15C0GH5.L2
K180K15C0GH5.L2
2.5 (0.10)
K180J15C0GH5.H5
K180K15C0GH5.H5
5.0 (0.20)
2.5 (0.10)
15
18
18
100
22
K220J15C0GH5.L2
K220K15C0GH5.L2
22
K220J15C0GH5.H5
K220K15C0GH5.H5
5.0 (0.20)
27
K270J15C0GH5.L2
K270K15C0GH5.L2
2.5 (0.10)
27
K270J15C0GH5.H5
K270K15C0GH5.H5
5.0 (0.20)
www.vishay.com
64
For technical questions, contact: [email protected]
Document Number: 45175
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
MONO-KAP C0G - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
2.5 (0.10)
33
K330J15C0GH5.L2
K330K15C0GH5.L2
33
K330J15C0GH5.H5
K330K15C0GH5.H5
5.0 (0.20)
39
K390J15C0GH5.L2
K390K15C0GH5.L2
2.5 (0.10)
39
K390J15C0GH5.H5
K390K15C0GH5.H5
5.0 (0.20)
47
K470J15C0GH5.L2
K470K15C0GH5.L2
2.5 (0.10)
47
K470J15C0GH5.H5
K470K15C0GH5.H5
5.0 (0.20)
56
K560J15C0GH5.L2
K560K15C0GH5.L2
2.5 (0.10)
56
K560J15C0GH5.H5
K560K15C0GH5.H5
5.0 (0.20)
2.5 (0.10)
68
K680J15C0GH5.L2
K680K15C0GH5.L2
68
K680J15C0GH5.H5
K680K15C0GH5.H5
5.0 (0.20)
82
K820J15C0GH5.L2
K820K15C0GH5.L2
2.5 (0.10)
82
K820J15C0GH5.H5
K820K15C0GH5.H5
5.0 (0.20)
100
K101J15C0GH5.L2
K101K15C0GH5.L2
2.5 (0.10)
100
K101J15C0GH5.H5
K101K15C0GH5.H5
5.0 (0.20)
120
K121J15C0GH5.L2
K121K15C0GH5.L2
2.5 (0.10)
120
K121J15C0GH5.H5
K121K15C0GH5.H5
5.0 (0.20)
2.5 (0.10)
150
K151J15C0GH5.L2
K151K15C0GH5.L2
150
K151J15C0GH5.H5
K151K15C0GH5.H5
5.0 (0.20)
180
K181J15C0GH5.L2
K181K15C0GH5.L2
2.5 (0.10)
180
K181J15C0GH5.H5
K181K15C0GH5.H5
5.0 (0.20)
220
K221J15C0GH5.L2
K221K15C0GH5.L2
2.5 (0.10)
220
K221J15C0GH5.H5
K221K15C0GH5.H5
5.0 (0.20)
270
K271J15C0GH5.L2
K271K15C0GH5.L2
2.5 (0.10)
K271J15C0GH5.H5
K271K15C0GH5.H5
5.0 (0.20)
2.5 (0.10)
270
100
330
K331J15C0GH5.L2
K331K15C0GH5.L2
330
K331J15C0GH5.H5
K331K15C0GH5.H5
5.0 (0.20)
390
K391J15C0GH5.L2
K391K15C0GH5.L2
2.5 (0.10)
390
K391J15C0GH5.H5
K391K15C0GH5.H5
5.0 (0.20)
470
K471J15C0GH5.L2
K471K15C0GH5.L2
2.5 (0.10)
470
K471J15C0GH5.H5
K471K15C0GH5.H5
5.0 (0.20)
560
K561J15C0GH5.L2
K561K15C0GH5.L2
2.5 (0.10)
560
K561J15C0GH5.H5
K561K15C0GH5.H5
5.0 (0.20)
2.5 (0.10)
680
K681J15C0GH5.L2
K681K15C0GH5.L2
680
K681J15C0GH5.H5
K681K15C0GH5.H5
5.0 (0.20)
820
K821J15C0GH5.L2
K821K15C0GH5.L2
2.5 (0.10)
820
K821J15C0GH5.H5
K821K15C0GH5.H5
5.0 (0.20)
1000
K102J20C0GH5.L2
K102K20C0GH5.L2
2.5 (0.10)
1000
K102J20C0GH5.H5
K102K20C0GH5.H5
5.0 (0.20)
1200
K122J20C0GH5.L2
K122K20C0GH5.L2
2.5 (0.10)
1200
K122J20C0GH5.H5
K122K20C0GH5.H5
5.0 (0.20)
2.5 (0.10)
1500
K152J20C0GH5.L2
K152K20C0GH5.L2
1500
K152J20C0GH5.H5
K152K20C0GH5.H5
5.0 (0.20)
1800
K182J20C0GH5.L2
K182K20C0GH5.L2
2.5 (0.10)
1800
K182J20C0GH5.H5
K182K20C0GH5.H5
5.0 (0.20)
2200
K222J20C0GH5.L2
K222K20C0GH5.L2
2.5 (0.10)
2200
K222J20C0GH5.H5
K222K20C0GH5.H5
5.0 (0.20)
Document Number: 45175
Revision: 16-Nov-09
For technical questions, contact: [email protected]
www.vishay.com
65
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
50 VDC and 100 VDC
Vishay
MONO-KAP C0G - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
2.5 (0.10)
2700
K272J20C0GH5.L2
K272K20C0GH5.L2
2700
K272J20C0GH5.H5
K272K20C0GH5.H5
5.0 (0.20)
3300
K332J20C0GH5.L2
K332K20C0GH5.L2
2.5 (0.10)
3300
K332J20C0GH5.H5
K332K20C0GH5.H5
5.0 (0.20)
3900
K392J20C0GH5.L2
K392K20C0GH5.L2
2.5 (0.10)
3900
100
K392J20C0GH5.H5
K392K20C0GH5.H5
5.0 (0.20)
4700
K472J20C0GH5.L2
K472K20C0GH5.L2
2.5 (0.10)
4700
K472J20C0GH5.H5
K472K20C0GH5.H5
5.0 (0.20)
5600
K562J20C0GH5.L2
K562K20C0GH5.L2
2.5 (0.10)
5600
K562J20C0GH5.H5
K562K20C0GH5.H5
5.0 (0.20)
www.vishay.com
66
For technical questions, contact: [email protected]
Document Number: 45175
Revision: 16-Nov-09
Mono-Kap
Vishay
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
DIMENSIONS
Wb
T
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
L2
H5
Component outline for
lead spacing 2.5 ± 0.8 mm
(straight leads)
Component outline for
lead spacing 5.0 ± 0.8 mm
(flat bent leads)
L2 and H5 are preferred styles
Wb
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
K2
K5
Component outline for
lead spacing 2.5 ± 0.8 mm
(outside kink)
Component outline for
lead spacing 5.0 ± 0.8 mm
(outside kink)
CAPACITOR DIMENSIONS AND WEIGHT in millimeter (inches)
MAX. SEATING HEIGHT (SH)
SIZE
Wbmax.
Hmax.
Tmax.
L2
H5
K2
K5
WEIGHT
(g)
15
4.0
(0.157)
4.0
(0.157)
2.5
(0.098)
1.58
(0.062)
2.54
(0.100)
3.50
(0.140)
3.50
(0.140)
≈ 0.15
20
5.0
(0.197)
5.0
(0.197)
3.2
(0.126)
1.58
(0.062)
2.54
(0.100)
3.50
(0.140)
3.50
(0.140)
≈ 0.16
Note
• Bulk packed types have a standard lead length L = 25.4 mm (1.0") minimum
• Thickness is defined as “T”
Document Number: 45171
Revision: 16-Nov-09
For technical questions, contact: [email protected]
www.vishay.com
67
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Capacitance range
33 pF to 3900 pF
Rated DC voltage
200 V
Tolerance on capacitance
100 pF to 0.047 µF
500 V
200 V
500 V
± 5 %, ± 10 %
± 10 %, ± 20 %
C0G (NP0)
X7R
Dielectric Code
ORDERING INFORMATION
K
103
K
15
X7R
K
5
3
H
5
PRODUCT
TYPE
CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
SIZE
CODE
TEMP.
CHAR.
RATED
VOLTAGE
LEAD
DIA.
LEAD LENGTH/
PACKAGING
LEAD
STYLE
LEAD
SPACING
K=
Mono-Kap
Two significant
digits followed by
the number of
zeros.
For example:
103 = 10 000 pF
J=±5%
K = ± 10 %
M = ± 20 %
Ref.
mech.
spec.
C0G
X7R
K=
200 VDC
L=
500 VDC
5=
0.5 mm
(0.20")
3 = Bulk, with lead
length of 30 ± 5.0
mm (1.25")
T = Tape and reel
U = Ammopack
L=
Straight
Lead
H=
High
seated
assy
2=
2.5 (0.100")
5=
5.0 (0.200")
Ordering Example: K-103-K-15-X7R-K-5-3-H-5
www.vishay.com
68
For technical questions, contact: [email protected]
Document Number: 45171
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
CAPACITANCE RANGE CHART
C0G (NP0) DIELECTRIC
SIZE
X7R DIELECTRIC
15
RATED VOLTAGE
•
•
121
•
•
150 pF
151
•
•
180 pF
181
•
•
220
220 pF
221
•
•
27 pF
270
270 pF
271
•
•
33 pF
330
•
•
330 pF
331
•
•
39 pF
390
•
•
390 pF
391
•
•
47 pF
470
•
•
470 pF
471
•
•
56 pF
560
•
•
560 pF
561
•
•
68 pF
680
•
•
680 pF
681
•
•
82 pF
820
•
•
820 pF
821
•
•
100 pF
101
•
•
1000 pF
102
•
•
120 pF
121
•
•
1200 pF
122
•
•
150 pF
151
•
•
1500 pF
152
•
•
180 pF
181
•
•
1800 pF
182
•
•
220 pF
221
•
•
2200 pF
222
•
•
270 pF
271
•
•
2700 pF
272
•
•
330 pF
331
•
•
3300 pF
332
•
•
390 pF
391
•
•
3900 pF
392
•
•
470 pF
471
•
•
4700 pF
472
•
•
560 pF
561
•
•
5600 pF
562
•
•
680 pF
681
•
•
6800 pF
682
•
•
820 pF
821
•
•
8200 pF
822
•
•
1000 pF
102
•
•
0.01 µF
103
•
•
1200 pF
122
•
•
0.012 µF
123
•
•
1500 pF
152
•
•
0.015 µF
153
•
•
1800 pF
182
•
•
0.018 µF
183
•
•
2200 pF
222
•
0.022 µF
223
•
2700 pF
272
•
0.027 µF
273
•
•
3300 pF
332
•
0.033 µF
333
•
•
3900 pF
392
•
0.039 µF
393
•
•
4700 pF
472
0.047 µF
473
•
•
5600 pF
562
0.056 µF
563
6800 pF
682
0.068 µF
683
8200 pF
822
0.082 µF
823
0.01 µF
103
0.10 µF
104
0.15 µF
154
0.22 µF
224
0.33 µF
334
0.47 µF
474
0.68 µF
684
1.0 µF
105
12 pF
500
20
101
10 pF
200
15
500
CODE
500
SIZE
RATED VOLTAGE
200
VALUE
200
20
VALUE
CODE
100
100 pF
120
120 pF
15 pF
150
18 pF
180
22 pF
Document Number: 45171
Revision: 16-Nov-09
For technical questions, contact: [email protected]
200
500
•
www.vishay.com
69
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
PART NUMBER LISTING - if not in range chart, please contact [email protected]
MONO-KAP X7R - 200 VDC CLEAR TEXT CODE
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
20 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
100
K101K15X7RK5.L2
K101M15X7RK5.L2
2.5 (0.10)
100
K101K15X7RK5.H5
K101M15X7RK5.H5
5.0 (0.20)
120
K121K15X7RK5.L2
K121M15X7RK5.L2
2.5 (0.10)
120
K121K15X7RK5.H5
K121M15X7RK5.H5
5.0 (0.20)
150
K151K15X7RK5.L2
K151M15X7RK5.L2
2.5 (0.10)
150
K151K15X7RK5.H5
K151M15X7RK5.H5
5.0 (0.20)
180
K181K15X7RK5.L2
K181M15X7RK5.L2
2.5 (0.10)
180
K181K15X7RK5.H5
K181M15X7RK5.H5
5.0 (0.20)
220
K221K15X7RK5.L2
K221M15X7RK5.L2
2.5 (0.10)
220
K221K15X7RK5.H5
K221M15X7RK5.H5
5.0 (0.20)
270
K271K15X7RK5.L2
K271M15X7RK5.L2
2.5 (0.10)
270
K271K15X7RK5.H5
K271M15X7RK5.H5
5.0 (0.20)
330
K331K15X7RK5.L2
K331M15X7RK5.L2
2.5 (0.10)
330
K331K15X7RK5.H5
K331M15X7RK5.H5
5.0 (0.20)
390
K391K15X7RK5.L2
K391M15X7RK5.L2
2.5 (0.10)
390
K391K15X7RK5.H5
K391M15X7RK5.H5
5.0 (0.20)
470
K471K15X7RK5.L2
K471M15X7RK5.L2
2.5 (0.10)
470
K471K15X7RK5.H5
K471M15X7RK5.H5
5.0 (0.20)
560
K561K15X7RK5.L2
K561M15X7RK5.L2
2.5 (0.10)
560
K561K15X7RK5.H5
K561M15X7RK5.H5
5.0 (0.20)
680
K681K15X7RK5.L2
K681M15X7RK5.L2
2.5 (0.10)
CAPACITANCE (pF)
680
RATED VOLTAGE (VDC)
200
K681K15X7RK5.H5
K681M15X7RK5.H5
5.0 (0.20)
820
K821K15X7RK5.L2
K821M15X7RK5.L2
2.5 (0.10)
820
K821K15X7RK5.H5
K821M15X7RK5.H5
5.0 (0.20)
1000
K102K15X7RK5.L2
K102M15X7RK5.L2
2.5 (0.10)
1000
K102K15X7RK5.H5
K102M15X7RK5.H5
5.0 (0.20)
1200
K122K15X7RK5.L2
K122M15X7RK5.L2
2.5 (0.10)
1200
K122K15X7RK5.H5
K122M15X7RK5.H5
5.0 (0.20)
1500
K152K15X7RK5.L2
K152M15X7RK5.L2
2.5 (0.10)
1500
K152K15X7RK5.H5
K152M15X7RK5.H5
5.0 (0.20)
1800
K182K15X7RK5.L2
K182M15X7RK5.L2
2.5 (0.10)
1800
K182K15X7RK5.H5
K182M15X7RK5.H5
5.0 (0.20)
2200
K222K15X7RK5.L2
K222M15X7RK5.L2
2.5 (0.10)
2200
K222K15X7RK5.H5
K222M15X7RK5.H5
5.0 (0.20)
2700
K272K15X7RK5.L2
K272M15X7RK5.L2
2.5 (0.10)
2700
K272K15X7RK5.H5
K272M15X7RK5.H5
5.0 (0.20)
3300
K332K15X7RK5.L2
K332M15X7RK5.L2
2.5 (0.10)
3300
K332K15X7RK5.H5
K332M15X7RK5.H5
5.0 (0.20)
3900
K392K15X7RK5.L2
K392M15X7RK5.L2
2.5 (0.10)
3900
K392K15X7RK5.H5
K392M15X7RK5.H5
5.0 (0.20)
4700
K472K15X7RK5.L2
K472M15X7RK5.L2
2.5 (0.10)
4700
K472K15X7RK5.H5
K472M15X7RK5.H5
5.0 (0.20)
5600
K562K15X7RK5.L2
K562M15X7RK5.L2
2.5 (0.10)
www.vishay.com
70
For technical questions, contact: [email protected]
Document Number: 45171
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
MONO-KAP X7R - 200 VDC CLEAR TEXT CODE
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
20 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
5600
K562K15X7RK5.H5
K562M15X7RK5.H5
5.0 (0.20)
6800
K682K15X7RK5.L2
K682M15X7RK5.L2
2.5 (0.10)
6800
K682K15X7RK5.H5
K682M15X7RK5.H5
5.0 (0.20)
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
8200
K822K15X7RK5.L2
K822M15X7RK5.L2
2.5 (0.10)
8200
K822K15X7RK5.H5
K822M15X7RK5.H5
5.0 (0.20)
10 000
K103K15X7RK5.L2
K103M15X7RK5.L2
2.5 (0.10)
10 000
K103K15X7RK5.H5
K103M15X7RK5.H5
5.0 (0.20)
12 000
K123K15X7RK5.L2
K123M15X7RK5.L2
2.5 (0.10)
12 000
K123K15X7RK5.H5
K123M15X7RK5.H5
5.0 (0.20)
15 000
K153K15X7RK5.L2
K153M15X7RK5.L2
2.5 (0.10)
15 000
K153K15X7RK5.H5
K153M15X7RK5.H5
5.0 (0.20)
18 000
200
18 000
K183K15X7RK5.L2
K183M15X7RK5.L2
2.5 (0.10)
K183K15X7RK5.H5
K183M15X7RK5.H5
5.0 (0.20)
22 000
K223K15X7RK5.L2
K223M15X7RK5.L2
2.5 (0.10)
22 000
K223K15X7RK5.H5
K223M15X7RK5.H5
5.0 (0.20)
27 000
K273K20X7RK5.L2
K273M20X7RK5.L2
2.5 (0.10)
27 000
K273K20X7RK5.H5
K273M20X7RK5.H5
5.0 (0.20)
33 000
K333K20X7RK5.L2
K333M20X7RK5.L2
2.5 (0.10)
33 000
K333K20X7RK5.H5
K333M20X7RK5.H5
5.0 (0.20)
39 000
K393K20X7RK5.L2
K393M20X7RK5.L2
2.5 (0.10)
39 000
K393K20X7RK5.H5
K393M20X7RK5.H5
5.0 (0.20)
47 000
K473K20X7RK5.L2
K473M20X7RK5.L2
2.5 (0.10)
47 000
K473K20X7RK5.H5
K473M20X7RK5.H5
5.0 (0.20)
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
33
K330J15C0GK5.L2
K330K15C0GK5.L2
2.5 (0.10)
33
K330J15C0GK5.H5
K330K15C0GK5.H5
5.0 (0.20)
39
K390J15C0GK5.L2
K390K15C0GK5.L2
2.5 (0.10)
39
K390J15C0GK5.H5
K390K15C0GK5.H5
5.0 (0.20)
47
K470J15C0GK5.L2
K470K15C0GK5.L2
2.5 (0.10)
47
K470J15C0GK5.H5
K470K15C0GK5.H5
5.0 (0.20)
56
K560J15C0GK5.L2
K560K15C0GK5.L2
2.5 (0.10)
56
K560J15C0GK5.H5
K560K15C0GK5.H5
5.0 (0.20)
K680J15C0GK5.L2
K680K15C0GK5.L2
2.5 (0.10)
68
K680J15C0GK5.H5
K680K15C0GK5.H5
5.0 (0.20)
82
K820J15C0GK5.L2
K820K15C0GK5.L2
2.5 (0.10)
82
K820J15C0GK5.H5
K820K15C0GK5.H5
5.0 (0.20)
100
K101J15C0GK5.L2
K101K15C0GK5.L2
2.5 (0.10)
100
K101J15C0GK5.H5
K101K15C0GK5.H5
5.0 (0.20)
120
K121J15C0GK5.L2
K121K15C0GK5.L2
2.5 (0.10)
120
K121J15C0GK5.H5
K121K15C0GK5.H5
5.0 (0.20)
MONO-KAP C0G - 200 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
68
Document Number: 45171
Revision: 16-Nov-09
RATED VOLTAGE (VDC)
200
For technical questions, contact: [email protected]
www.vishay.com
71
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
MONO-KAP C0G - 200 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
2.5 (0.10)
150
K151J15C0GK5.L2
K151K15C0GK5.L2
150
K151J15C0GK5.H5
K151K15C0GK5.H5
5.0 (0.20)
180
K181J15C0GK5.L2
K181K15C0GK5.L2
2.5 (0.10)
180
K181J15C0GK5.H5
K181K15C0GK5.H5
5.0 (0.20)
220
K221J15C0GK5.L2
K221K15C0GK5.L2
2.5 (0.10)
220
K221J15C0GK5.H5
K221K15C0GK5.H5
5.0 (0.20)
270
K271J15C0GK5.L2
K271K15C0GK5.L2
2.5 (0.10)
270
K271J15C0GK5.H5
K271K15C0GK5.H5
5.0 (0.20)
330
K331J15C0GK5.L2
K331K15C0GK5.L2
2.5 (0.10)
330
K331J15C0GK5.H5
K331K15C0GK5.H5
5.0 (0.20)
390
K391J15C0GK5.L2
K391K15C0GK5.L2
2.5 (0.10)
390
K391J15C0GK5.H5
K391K15C0GK5.H5
5.0 (0.20)
470
K471J15C0GK5.L2
K471K15C0GK5.L2
2.5 (0.10)
470
K471J15C0GK5.H5
K471K15C0GK5.H5
5.0 (0.20)
560
K561J15C0GK5.L2
K561K15C0GK5.L2
2.5 (0.10)
560
K561J15C0GK5.H5
K561K15C0GK5.H5
5.0 (0.20)
680
K681J15C0GK5.L2
K681K15C0GK5.L2
2.5 (0.10)
K681J15C0GK5.H5
K681K15C0GK5.H5
5.0 (0.20)
K821J15C0GK5.L2
K821K15C0GK5.L2
2.5 (0.10)
680
820
200
820
K821J15C0GK5.H5
K821K15C0GK5.H5
5.0 (0.20)
1000
K102J20C0GK5.L2
K102K20C0GK5.L2
2.5 (0.10)
1000
K102J20C0GK5.H5
K102K20C0GK5.H5
5.0 (0.20)
1200
K122J20C0GK5.L2
K122K20C0GK5.L2
2.5 (0.10)
1200
K122J20C0GK5.H5
K122K20C0GK5.H5
5.0 (0.20)
1500
K152J20C0GK5.L2
K152K20C0GK5.L2
2.5 (0.10)
1500
K152J20C0GK5.H5
K152K20C0GK5.H5
5.0 (0.20)
1800
K182J20C0GK5.L2
K182K20C0GK5.L2
2.5 (0.10)
1800
K182J20C0GK5.H5
K182K20C0GK5.H5
5.0 (0.20)
2200
K222J20C0GK5.L2
K222K20C0GK5.L2
2.5 (0.10)
2200
K222J20C0GK5.H5
K222K20C0GK5.H5
5.0 (0.20)
2700
K272J20C0GK5.L2
K272K20C0GK5.L2
2.5 (0.10)
2700
K272J20C0GK5.H5
K272K20C0GK5.H5
5.0 (0.20)
3300
K332J20C0GK5.L2
K332K20C0GK5.L2
2.5 (0.10)
3300
K332J20C0GK5.H5
K332K20C0GK5.H5
5.0 (0.20)
3900
K392J20C0GK5.L2
K392K20C0GK5.L2
2.5 (0.10)
3900
K392J20C0GK5.H5
K392K20C0GK5.H5
5.0 (0.20)
www.vishay.com
72
For technical questions, contact: [email protected]
Document Number: 45171
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
MONO-KAP X7R - 500 VDC CLEAR TEXT CODE
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
20 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
100
K101K15X7RL5.H5
K101M15X7RL5.H5
5.0 (0.20)
120
K121K15X7RL5.H5
K121M15X7RL5.H5
5.0 (0.20)
150
K151K15X7RL5.H5
K151M15X7RL5.H5
5.0 (0.20)
180
K181K15X7RL5.H5
K181M15X7RL5.H5
5.0 (0.20)
220
K221K15X7RL5.H5
K221M15X7RL5.H5
5.0 (0.20)
270
K271K15X7RL5.H5
K271M15X7RL5.H5
5.0 (0.20)
330
K331K15X7RL5.H5
K331M15X7RL5.H5
5.0 (0.20)
390
K391K15X7RL5.H5
K391M15X7RL5.H5
5.0 (0.20)
470
K471K15X7RL5.H5
K471M15X7RL5.H5
5.0 (0.20)
560
K561K15X7RL5.H5
K561M15X7RL5.H5
5.0 (0.20)
680
K681K15X7RL5.H5
K681M15X7RL5.H5
5.0 (0.20)
820
K821K15X7RL5.H5
K821M15X7RL5.H5
5.0 (0.20)
1000
K102K15X7RL5.H5
K102M15X7RL5.H5
5.0 (0.20)
1200
K122K15X7RL5.H5
K122M15X7RL5.H5
5.0 (0.20)
1500
K152K15X7RL5.H5
K152M15X7RL5.H5
5.0 (0.20)
1800
K182K15X7RL5.H5
K182M15X7RL5.H5
5.0 (0.20)
K222K15X7RL5.H5
K222M15X7RL5.H5
5.0 (0.20)
2700
K272K15X7RL5.H5
K272M15X7RL5.H5
5.0 (0.20)
3300
K332K20X7RL5.H5
K332M20X7RL5.H5
5.0 (0.20)
3900
K392K20X7RL5.H5
K392M20X7RL5.H5
5.0 (0.20)
4700
K472K20X7RL5.H5
K472M20X7RL5.H5
5.0 (0.20)
5600
K562K20X7RL5.H5
K562M20X7RL5.H5
5.0 (0.20)
6800
K682K20X7RL5.H5
K682M20X7RL5.H5
5.0 (0.20)
8200
K822K20X7RL5.H5
K822M20X7RL5.H5
5.0 (0.20)
10 000
K103K20X7RL5.H5
K103M20X7RL5.H5
5.0 (0.20)
12 000
K123K20X7RL5.H5
K123M20X7RL5.H5
5.0 (0.20)
15 000
K153K20X7RL5.H5
K153M20X7RL5.H5
5.0 (0.20)
18 000
K183K20X7RL5.H5
K183M20X7RL5.H5
5.0 (0.20)
22 000
K223K20X7RL5.H5
K223M20X7RL5.H5
5.0 (0.20)
27 000
K273K20X7RL5.H5
K273M20X7RL5.H5
5.0 (0.20)
33 000
K333K20X7RL5.H5
K333M20X7RL5.H5
5.0 (0.20)
39 000
K393K20X7RL5.H5
K393M20X7RL5.H5
5.0 (0.20)
47 000
K473K20X7RL5.H5
K473M20X7RL5.H5
5.0 (0.20)
CAPACITANCE (pF)
2200
Document Number: 45171
Revision: 16-Nov-09
RATED VOLTAGE (VDC)
500
For technical questions, contact: [email protected]
www.vishay.com
73
Mono-Kap
Multilayer Ceramic Dipped Radial Capacitors
200 VDC and 500 VDC
Vishay
MONO-KAP C0G - 500 VDC CLEAR TEXT CODE
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
10 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
33
K330J15C0GL5.H5
K330K15C0GL5.H5
5.0 (0.20)
39
K390J15C0GL5.H5
K390K15C0GL5.H5
5.0 (0.20)
47
K470J15C0GL5.H5
K470K15C0GL5.H5
5.0 (0.20)
56
K560J15C0GL5.H5
K560K15C0GL5.H5
5.0 (0.20)
68
K680J15C0GL5.H5
K680K15C0GL5.H5
5.0 (0.20)
CAPACITANCE (pF)
RATED VOLTAGE (VDC)
82
K820J15C0GL5.H5
K820K15C0GL5.H5
5.0 (0.20)
100
K101J15C0GL5.H5
K101K15C0GL5.H5
5.0 (0.20)
120
K121J15C0GL5.H5
K121K15C0GL5.H5
5.0 (0.20)
150
K151J15C0GL5.H5
K151K15C0GL5.H5
5.0 (0.20)
180
K181J15C0GL5.H5
K181K15C0GL5.H5
5.0 (0.20)
220
K221J15C0GL5.H5
K221K15C0GL5.H5
5.0 (0.20)
K271J15C0GL5.H5
K271K15C0GL5.H5
5.0 (0.20)
330
K331J15C0GL5.H5
K331K15C0GL5.H5
5.0 (0.20)
390
K391J15C0GL5.H5
K391K15C0GL5.H5
5.0 (0.20)
470
K471J20C0GL5.H5
K471K20C0GL5.H5
5.0 (0.20)
560
K561J20C0GL5.H5
K561K20C0GL5.H5
5.0 (0.20)
680
K681J20C0GL5.H5
K681K20C0GL5.H5
5.0 (0.20)
270
500
820
K821J20C0GL5.H5
K821K20C0GL5.H5
5.0 (0.20)
1000
K102J20C0GL5.H5
K102K20C0GL5.H5
5.0 (0.20)
1200
K122J20C0GL5.H5
K122K20C0GL5.H5
5.0 (0.20)
1500
K152J20C0GL5.H5
K152K20C0GL5.H5
5.0 (0.20)
1800
K182J20C0GL5.H5
K182K20C0GL5.H5
5.0 (0.20)
www.vishay.com
74
For technical questions, contact: [email protected]
Document Number: 45171
Revision: 16-Nov-09
Ordering Information
Vishay
Multilayer Ceramic Dipped Axial and Radial Capacitors
C0G and X7R Dielectric Capacitors
AXIAL ORDERING INFORMATION
A
103
K
15
X7R
F
5
TAA
PRODUCT
TYPE
CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
SIZE CODE
TEMP.
CHAR.
RATED
VOLTAGE
LEAD
DIAMETER
PACKAGING
A = Mono-Axial
10 pF to 1.0 µF
(3 digit code).
First two digits are
significant. Third
digit is number of
zeros.
For example:
100 = 10 pF,
101 = 100 pF,
332 = 3300 pF,
103 = 10 000 pF
= 0.01 µF.
Values less
than 10 pF:
109 = 1.0 pF,
479 = 4.7 pF
J=±5%
K = ± 10 %
M = ± 20 %
Z = + 80 %/- 20 %
15 (0805)
and 20 (1206)
or (1210)
C0G
X7R
Y5V
F = 50 VDC
H = 100 VDC
K = 200 VDC
L = 500 VDC
5 = 0.5 mm (0.020") TAA = T and R
UAA = AMMO
RADIAL ORDERING INFORMATION
K
103
K
15
X7R
F
5
3
H
5
PRODUCT
TYPE
CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
SIZE
CODE
TEMP.
CHAR.
RATED
VOLTAGE
LEAD
DIA.
LEAD LENGTH/
PACKAGING
LEAD
STYLE
LEAD
SPACING
K=
Mono-Kap
15
J=±5%
10 pF to 1.0 µF
(0805)
K = ± 10 %
(3 digit code).
and 20
M = ± 20 %
First two digits are
significant. Third Z = + 80 %/- 20 % (1206) or
(1210)
digit is number of
zeros.
For example:
100 = 10 pF,
101 = 100 pF,
332 = 3300 pF,
103 = 10 000 pF
= 0.01 µF.
Values less
than 10 pF:
109 = 1.0 pF,
479 = 4.7 pF
C0G
X7R
Y5V
F = 50 VDC
H = 100 VDC
K = 200 VDC
L = 500 VDC
5=
0.5 mm
(0.20")
3 = Bulk
U = Ammopack
T = Tape and reel
L=
Straight
Lead
H=
High
seated
assy
2=
2.5 (0.100")
5=
5.0 (0.200")
Document Number: 45176
Revision: 18-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
75
Cross Reference
Vishay
Cross Reference List
Vishay Sprague vs. Vishay BCcomponents Part Numbers
MULTILAYER CERAMIC DIPPED RADIAL CAPACITORS
VOLT
PITCH
(mm)
100 000
50 V
100 000
50 V
100 000
50 V
C-VALUE
(pF)
VISHAY SPRAGUE (1)
PITCH ± 0.8
(mm)
VISHAY BCcomponents/
CLEARTEXT (1)
7.62
1C30Z5U104M050B
7.50
K104M15X7RF53H7
2.54
1C10Z5U104M050R
2.54
K104M15X7RF5TL2
5.00
1C20Z5U104M050R
5.00
K104M15X7RF5TH5
100 000
50 V
2.54
1C10X7R104K050B
2.54
K104K15X7RF53L2
100 000
50 V
5.00
1C20Z5U104M050B
5.00
K104M15X7RF53H5
10 000
50 V
5.00
1C20Z5U103M050B
5.00
K103M15X7RF53H5
100 000
50 V
2.54
1C10X7R104K050R
2.54
K104K15X7RF5TL2
100 000
50 V
5.00
1C20X7R104K050R
5.00
K104K15X7RF5TH5
10 000
50 V
6.35
1C25Z5U103M050B
6.40
K103M15X7RF53H6
1 000 000
50 V
10.16
2C40Z5U105M050B
10.00
K105M20X7RF53H0
10 000
50 V
2.54
1C10X7R103K050B
2.54
K103K15X7RF53L2
100 000
50 V
6.35
1C25Z5U104M050B
6.40
K104M15X7RF53H6
10 000
50 V
2.54
1C10Z5U103M050B
2.54
K103M15X7RF53L2
100 000
50 V
5.00
1C20X7R104K050B
5.00
K104K15X7RF53H5
100 000
100 V
2.54
1C10Z5U104M100B
2.54
K104M20X7RH53L2
1 000 000
50 V
5.00
2C20Z5U105M050B
5.00
K105M20X7RF53H5
1000
50 V
2.54
1C10X7R102K050B
2.54
K102K15X7RF53L2
100 000
100 V
2.54
1C10X7R104K100B
2.54
K104K20X7RH53L2
10 000
50 V
5.00
1C20X7R103K050R
5.00
K103K15X7RF5TH5
10 000
50 V
5.00
1C20X7R103K050B
5.00
K103K15X7RF53H5
1 000 000
50 V
5.00
2C37Z5U105M050B
5.00
K105M20X7RF53H5
10 000
50 V
2.54
1C10X7R103K050R
2.54
K103K15X7RF5TL2
47 000
50 V
2.54
1C10X7R473K050B
2.54
K473K15X7RF53L2
10 000
50 V
5.00
1C20Z5U103M050R
5.00
K103M15X7RF5TH5
1 000 000
50 V
5.00
2C20Z5U105M050R
5.00
K105M20X7RF5TH5
1 000 000
50 V
6.35
2C25Z5U105M050B
6.40
K105M20X7RF53H6
22 000
50 V
2.54
1C10X7R223K050B
2.54
K223K15X7RF53L2
220
50 V
5.00
1C20C0G221J050B
5.00
K221J15C0GF53H5
22
50 V
2.54
1C10C0G220J050B
2.54
K220J15C0GF53L2
220 000
50 V
5.00
1C20Z5U224M050B
5.00
K224M20X7RF53H5
10 000
50 V
6.35
1C25X7R103K050B
6.40
K103K15X7RF53H6
3300
50 V
5.00
1C20C0G332J050B
5.00
K332J20C0GF53H5
470 000
50 V
5.00
2C37Z5U474M050B
5.00
K474M20X7RF53H5
47 000
100 V
2.54
1C10X7R473K100B
2.54
K473K20X7RH53L2
100 000
50 V
6.35
1C25X7R104K050B
6.40
K104K15X7RF53H6
100
50 V
2.54
1C10C0G101J050B
2.54
K101J15C0GF53L2
1000
50 V
2.54
1C10C0G102J050B
2.54
K102J15C0GF53L2
47
100 V
2.54
1C10C0G470J100B
2.54
K470J15C0GH53L2
220 000
50 V
2.54
1C10Z5U224M050B
2.54
K224M20X7RF53L2
22
50 V
5.00
1C20C0G220J050B
5.00
K220J15C0GF53H5
100 000
100 V
5.00
1C20X7R104K100B
5.00
K104K20X7RH53H5
1000
50 V
5.00
1C20X7R102K050R
5.00
K102K15X7RF5TH5
Note
(1) Listed according to most preferable used types
www.vishay.com
76
For technical questions, contact: [email protected]
Document Number: 45177
Revision: 18-Jan-06
Cross Reference
Cross Reference List
Vishay Sprague vs. Vishay BCcomponents Part Numbers
Vishay
MULTILAYER CERAMIC DIPPED RADIAL CAPACITORS
PITCH
(mm)
VISHAY SPRAGUE (1)
100 V
2.54
50 V
2.54
10 000
50 V
22 000
2200
470
C-VALUE
(pF)
VOLT
PITCH ± 0.8
(mm)
VISHAY BCcomponents/
CLEARTEXT (1)
10 000
47
1C10X7R103K100B
2.54
K103K15X7RH53L2
1C10C0G470J050B
2.54
K470J15C0GF53L2
2.54
1C10Z5U103M050R
2.54
K103M15X7RF5TL2
50 V
5.00
1C20X7R223K050R
5.00
K223K15X7RF5TH5
50 V
5.00
1C20C0G222J050B
5.00
K222J15C0GF53H5
50 V
5.00
1C20C0G471J050B
5.00
K471J15C0GF53H5
1000
50 V
5.00
1C20X7R102K050B
5.00
K102K15X7RF53H5
1000
100 V
2.54
1C10X7R102K100B
2.54
K102K15X7RH53L2
330 000
50 V
5.00
1C20Z5U334M050B
5.00
K334M20X7RF53H5
22
100 V
2.54
1C10C0G220J100B
2.54
K220J15C0GH53L2
100 000
100 V
2.54
1C10X7R104K100R
2.54
K104K20X7RH5TL2
47 000
50 V
2.54
1C10Z5U473M050B
2.54
K473M15X7RF53L2
10 000
100 V
5.00
1C20X7R103K100R
5.00
K103K15X7RH5TH5
330
50 V
5.00
1C20C0G331J050B
5.00
K331J15C0GF53H5
47 000
50 V
6.35
1C25Z5U473M050B
6.40
K473M15X7RF53H6
47 000
50 V
5.00
1C20Z5U473M050B
5.00
K473M15X7RF53H5
100 000
50 V
7.62
1C30X7R104K050B
7.50
K104K15X7RF53H7
10 000
50 V
7.62
1C30Z5U103M050B
7.50
K103M15X7RF53H7
470 000
50 V
5.00
2C20X7R474K050R
5.00
K474K20X7RF5TH5
10 000
100 V
5.00
1C20X7R103K100B
5.00
K103K15X7RH53H5
470 000
50 V
5.00
2C20Z5U474M050B
5.00
K474M20X7RF53H5
2200
100 V
5.00
1C20X7R222K100B
5.00
K222K15X7RH53H5
47 000
50 V
5.00
1C20X7R473K050B
5.00
K473K15X7RF53H5
1000
100 V
2.54
1C10C0G102J100B
2.54
K102J20C0GH53L2
470
50 V
2.54
1C10C0G471J050B
2.54
K471J15C0GF53L2
33 000
50 V
2.54
1C10X7R333K050B
2.54
K333K15X7RF53L2
100
50 V
5.00
1C20C0G101J050B
5.00
K101J15C0GF53H5
22 000
50 V
5.00
1C20Z5U223M050B
5.00
K223M15X7RF53H5
22 000
50 V
6.35
1C25Z5U223M050B
6.40
K223M15X7RF53H6
10 000
50 V
7.62
1C30X7R103K050B
7.50
K103K15X7RF53H7
220 000
50 V
6.35
1C25Z5U224M050B
6.40
K224M20X7RF53H6
470 000
50 V
5.00
2C20X7R474K050B
5.00
K474K20X7RF53H5
22
50 V
2.54
1C10C0G220J050R
2.54
K220J15C0GF5TL2
330
50 V
2.54
1C10C0G331J050B
2.54
K331J15C0GF53L2
22 000
50 V
2.54
1C10X7R223K050R
2.54
K223K15X7RF5TL2
22 000
50 V
2.54
1C10Z5U223M050R
2.54
K223M15X7RF5TL2
330 000
50 V
2.54
1C10Z5U334M050B
2.54
K334M20X7RF53L2
100
50 V
5.00
1C20C0G101J050R
5.00
K101J15C0GF5TH5
22
50 V
5.00
1C20C0G220J050R
5.00
K220J15C0GF5TH5
470
50 V
5.00
1C20C0G471J050R
5.00
K471J15C0GF5TH5
100 000
100 V
5.00
1C20X7R104K100R
5.00
K104K20X7RH5TH5
1000
100 V
6.35
1C25X7R102K100B
6.40
K102K15X7RH53H6
33 000
50 V
6.35
1C25X7R333K050B
6.40
K333K15X7RF53H6
220 000
50 V
5.00
2C20X7R224K050B
5.00
K224K20X7RF53H5
470 000
50 V
5.00
2C20Z5U474M050R
5.00
K474M20X7RF5TH5
Note
(1) Listed according to most preferable used types
Document Number: 45177
Revision: 18-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
77
Cross Reference
Vishay
Cross Reference List
Vishay Sprague vs. Vishay BCcomponents Part Numbers
MULTILAYER CERAMIC DIPPED RADIAL CAPACITORS
VOLT
PITCH
(mm)
VISHAY SPRAGUE (1)
PITCH ± 0.8
(mm)
VISHAY BCcomponents/
CLEARTEXT (1)
10 000
50 V
2.54
9C10Z5U103M050B
2.54
K103M15X7RF53L2
10
100 V
2.54
1C10C0G100J100B
2.54
K100J15C0GH53L2
100
100 V
2.54
1C10C0G101J100B
2.54
K101J15C0GH53L2
220
50 V
2.54
1C10C0G221J050B
2.54
K221J15C0GF53L2
33
50 V
2.54
1C10C0G330J050B
2.54
K330J15C0GF53L2
33
100 V
2.54
1C10C0G330J100B
2.54
K330J15C0GH53L2
330
100 V
2.54
1C10C0G331J100B
2.54
K331J15C0GH53L2
470
100 V
2.54
1C10C0G471J100B
2.54
K471J15C0GH53L2
22 000
100 V
2.54
1C10X7R223K100B
2.54
K223K15X7RH53L2
4700
50 V
2.54
1C10X7R472K050B
2.54
K472K15X7RF53L2
1000
50 V
5.00
1C20C0G102J050B
5.00
K102J15C0GF53H5
1000
100 V
5.00
1C20C0G102J100B
5.00
K102J20C0GH53H5
2200
50 V
5.00
1C20X7R222K050B
5.00
K222K15X7RF53H5
1000
50 V
6.35
1C25C0G102J050B
6.40
K102J15C0GF53H6
100 000
100 V
6.35
1C25X7R104K100B
6.40
K104K20X7RH53H6
220 000
50 V
5.00
2C20X7R224K050R
5.00
K224K20X7RF5TH5
1 000 000
50 V
10.16
3C40X7R105K050B
10.00
K105K20X7RF53H0
220 000
50 V
5.00
2C37Z5U224M050B
5.00
K224M20X7RF53H5
220
50 V
2.54
1C10C0G221J050R
2.54
K221J15C0GF5TL2
1000
50 V
2.54
1C10X7R102K050R
2.54
K102K15X7RF5TL2
47
50 V
5.00
1C20C0G470J050R
5.00
K470J15C0GF5TH5
1000
100 V
5.00
1C20X7R102K100B
5.00
K102K15X7RH53H5
2200
50 V
5.00
1C20X7R222K050R
5.00
K222K15X7RF5TH5
4700
50 V
5.00
1C20X7R472K050R
5.00
K472K15X7RF5TH5
220 000
50 V
5.00
1C20Z5U224M050R
5.00
K224M20X7RF5TH5
330 000
50 V
5.00
1C20Z5U334M050R
5.00
K334M20X7RF5TH5
100 000
100 V
7.62
1C30X7R104K100B
7.50
K104K20X7RH53H7
1 000 000
50 V
7.62
2C30Z5U105M050B
7.50
K105M20X7RF53H7
10
50 V
2.54
1C10C0G100J050B
2.54
K100J15C0GF53L2
220
100 V
2.54
1C10C0G221J100B
2.54
K221J15C0GH53L2
2200
50 V
2.54
1C10C0G222J050B
2.54
K222J15C0GF53L2
2200
100 V
2.54
1C10C0G222J100B
2.54
K222J20C0GH53L2
2200
100 V
2.54
1C10X7R222K100B
2.54
K222K15X7RH53L2
3300
100 V
2.54
1C10X7R332K100B
2.54
K332K15X7RH53L2
22 000
100 V
2.54
1C10Z5U223M100B
2.54
K223M15X7RH53L2
33 000
50 V
2.54
1C10Z5U333M050B
2.54
K333M15X7RF53L2
33
50 V
5.00
1C20C0G330J050B
5.00
K330J15C0GF53H5
3300
100 V
5.00
1C20X7R332K100B
5.00
K332K15X7RH53H5
22
50 V
6.35
1C25C0G220J050B
6.40
K220J15C0GF53H6
220
50 V
6.35
1C25C0G221J050B
6.40
K221J15C0GF53H6
470
50 V
6.35
1C25C0G471J050B
6.40
K471J15C0GF53H6
10 000
100 V
6.35
1C25X7R103K100B
6.40
K103K15X7RH53H6
33 000
50 V
6.35
1C25Z5U333M050B
6.40
K333M15X7RF53H6
330 000
50 V
6.35
1C25Z5U334M050B
6.40
K334M20X7RF53H6
1000
100 V
7.62
1C30X7R102K100B
7.50
K102K15X7RH53H7
C-VALUE
(pF)
Note
(1) Listed according to most preferable used types
www.vishay.com
78
For technical questions, contact: [email protected]
Document Number: 45177
Revision: 18-Jan-06
Cross Reference
Cross Reference List
Vishay Sprague vs. Vishay BCcomponents Part Numbers
Vishay
MULTILAYER CERAMIC DIPPED RADIAL CAPACITORS
C-VALUE
(pF)
VOLT
PITCH
(mm)
VISHAY SPRAGUE (1)
PITCH ± 0.8
(mm)
VISHAY BCcomponents/
CLEARTEXT (1)
1 000 000
50 V
5.00
2C20X7R105K050R
5.00
K105K20X7RF5TH5
330 000
50 V
5.00
2C37Z5U334M050B
5.00
K334M20X7RF53H5
1 000 000
50 V
5.00
3C37X7R105K050B
5.00
K105K20X7RF53H5
47 000
50 V
6.35
1C25X7R473K050B
6.40
K473K15X7RF53H6
220 000
50 V
10.16
2C40Z5U224M050B
10.00
K224M20X7RF53H0
470 000
50 V
5.00
2C37X7R474K050B
5.00
K474K20X7RF53H5
1000
50 V
2.54
1C10C0G102J050R
2.54
K102J15C0GF5TL2
22
100 V
2.54
1C10C0G220J100R
2.54
K220J15C0GH5TL2
33
50 V
2.54
1C10C0G330J050R
2.54
K330J15C0GF5TL2
3300
50 V
2.54
1C10C0G332J050B
2.54
K332J20C0GF53L2
3300
100 V
2.54
1C10C0G332J100B
2.54
K332J20C0GH53L2
47
50 V
2.54
1C10C0G470J050R
2.54
K470J15C0GF5TL2
470
50 V
2.54
1C10C0G471J050R
2.54
K471J15C0GF5TL2
4700
50 V
2.54
1C10C0G472J050B
2.54
K472J20C0GF53L2
1000
100 V
2.54
1C10X7R102K100R
2.54
K102K15X7RH5TL2
10 000
100 V
2.54
1C10X7R103K100R
2.54
K103K15X7RH5TL2
2200
50 V
2.54
1C10X7R222K050B
2.54
K222K15X7RF53L2
3300
50 V
2.54
1C10X7R332K050B
2.54
K332K15X7RF53L2
33 000
100 V
2.54
1C10X7R333K100B
2.54
K333K20X7RH53L2
4700
50 V
2.54
1C10X7R472K050R
2.54
K472K15X7RF5TL2
4700
100 V
2.54
1C10X7R472K100B
2.54
K472K15X7RH53L2
10 000
100 V
2.54
1C10Z5U103M100B
2.54
K103M15X7RH53L2
22 000
50 V
2.54
1C10Z5U223M050B
2.54
K223M15X7RF53L2
33 000
100 V
2.54
1C10Z5U333M100B
2.54
K333M20X7RH53L2
330 000
50 V
2.54
1C10Z5U334M050R
2.54
K334M20X7RF5TL2
47 000
100 V
2.54
1C10Z5U473M100B
2.54
K473M20X7RH53L2
10
50 V
5.00
1C20C0G100J050B
5.00
K100J15C0GF53H5
10
50 V
5.00
1C20C0G100J050R
5.00
K100J15C0GF5TH5
10
100 V
5.00
1C20C0G100J100B
5.00
K100J15C0GH53H5
10
100 V
5.00
1C20C0G100J100R
5.00
K100J15C0GH5TH5
100
100 V
5.00
1C20C0G101J100B
5.00
K101J15C0GH53H5
1000
50 V
5.00
1C20C0G102J050R
5.00
K102J15C0GF5TH5
22
100 V
5.00
1C20C0G220J100B
5.00
K220J15C0GH53H5
22
100 V
5.00
1C20C0G220J100R
5.00
K220J15C0GH5TH5
220
50 V
5.00
1C20C0G221J050R
5.00
K221J15C0GF5TH5
220
100 V
5.00
1C20C0G221J100B
5.00
K221J15C0GH53H5
2200
100 V
5.00
1C20C0G222J100B
5.00
K222J20C0GH53H5
33
50 V
5.00
1C20C0G330J050R
5.00
K330J15C0GF5TH5
33
100 V
5.00
1C20C0G330J100B
5.00
K330J15C0GH53H5
330
50 V
5.00
1C20C0G331J050R
5.00
K331J15C0GF5TH5
330
100 V
5.00
1C20C0G331J100B
5.00
K331J15C0GH53H5
3300
50 V
5.00
1C20C0G332J050R
5.00
K332J20C0GF5TH5
3300
100 V
5.00
1C20C0G332J100B
5.00
K332J20C0GH53H5
3300
100 V
5.00
1C20C0G332J100R
5.00
K332J20C0GH5TH5
47
50 V
5.00
1C20C0G470J050B
5.00
K470J15C0GF53H5
Note
(1) Listed according to most preferable used types
Document Number: 45177
Revision: 18-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
79
Cross Reference
Vishay
Cross Reference List
Vishay Sprague vs. Vishay BCcomponents Part Numbers
MULTILAYER CERAMIC DIPPED RADIAL CAPACITORS
C-VALUE
(pF)
VOLT
PITCH
(mm)
VISHAY SPRAGUE (1)
PITCH ± 0.8
(mm)
VISHAY BCcomponents/
CLEARTEXT (1)
47
100 V
5.00
1C20C0G470J100B
5.00
K470J15C0GH53H5
470
100 V
5.00
1C20C0G471J100B
5.00
K471J15C0GH53H5
4700
50 V
5.00
1C20C0G472J050B
5.00
K472J20C0GF53H5
1000
100 V
5.00
1C20X7R102K100R
5.00
K102K15X7RH5TH5
22 000
50 V
5.00
1C20X7R223K050B
5.00
K223K15X7RF53H5
22 000
100 V
5.00
1C20X7R223K100B
5.00
K223K15X7RH53H5
3300
50 V
5.00
1C20X7R332K050B
5.00
K332K15X7RF53H5
33 000
50 V
5.00
1C20X7R333K050B
5.00
K333K15X7RF53H5
33 000
100 V
5.00
1C20X7R333K100B
5.00
K333K20X7RH53H5
4700
50 V
5.00
1C20X7R472K050B
5.00
K472K15X7RF53H5
47 000
100 V
5.00
1C20X7R473K100B
5.00
K473K20X7RH53H5
100 000
100 V
5.00
1C20Z5U104M100B
5.00
K104M20X7RH53H5
22 000
50 V
5.00
1C20Z5U223M050R
5.00
K223M15X7RF5TH5
33 000
50 V
5.00
1C20Z5U333M050B
5.00
K333M15X7RF53H5
33 000
50 V
5.00
1C20Z5U333M050R
5.00
K333M15X7RF5TH5
47 000
50 V
5.00
1C20Z5U473M050R
5.00
K473M15X7RF5TH5
10
50 V
6.35
1C25C0G100J050B
6.40
K100J15C0GF53H6
100
50 V
6.35
1C25C0G101J050B
6.40
K101J15C0GF53H6
100
100 V
6.35
1C25C0G101J100B
6.40
K101J15C0GH53H6
22
100 V
6.35
1C25C0G220J100B
6.40
K220J15C0GH53H6
470
100 V
6.35
1C25C0G471J100B
6.40
K471J15C0GH53H6
1000
50 V
6.35
1C25X7R102K050B
6.40
K102K15X7RF53H6
3300
50 V
6.35
1C25X7R332K050B
6.40
K332K15X7RF53H6
100 000
100 V
6.35
1C25Z5U104M100B
6.40
K104M20X7RH53H6
1000
100 V
7.62
1C30C0G102J100B
7.50
K102J20C0GH53H7
22
50 V
7.62
1C30C0G220J050B
7.50
K220J15C0GF53H7
330
50 V
7.62
1C30C0G331J050B
7.50
K331J15C0GF53H7
1000
50 V
7.62
1C30X7R102K050B
7.50
K102K15X7RF53H7
10 000
100 V
7.62
1C30X7R103K100B
7.50
K103K15X7RH53H7
22 000
100 V
7.62
1C30X7R223K100B
7.50
K223K15X7RH53H7
100 000
100 V
7.62
1C30Z5U104M100B
7.50
K104M20X7RH53H7
330 000
50 V
7.62
1C30Z5U334M050B
7.50
K334M20X7RF53H7
330 000
50 V
5.00
2C20X7R334K050B
5.00
K334K20X7RF53H5
220 000
50 V
6.35
2C25X7R224K050B
6.40
K224K20X7RF53H6
470 000
50 V
6.35
2C25Z5U474M050B
6.40
K474M20X7RF53H6
1 000 000
50 V
7.62
2C30X7R105K050B
7.50
K105K20X7RF53H7
220 000
50 V
7.62
2C30X7R224K050B
7.50
K224K20X7RF53H7
220 000
50 V
5.00
2C37X7R224K050B
5.00
K224K20X7RF53H5
330 000
50 V
10.16
2C40X7R334K050B
10.00
K334K20X7RF53H0
470 000
50 V
10.16
2C40X7R474K050B
10.00
K474K20X7RF53H0
470 000
50 V
10.16
2C40Z5U474M050B
10.00
K474M20X7RF53H0
100
100 V
2.54
9C10C0G101J100B
2.54
K101J15C0GH53L2
22
100 V
2.54
9C10C0G220J100B
2.54
K220J15C0GH53L2
220
50 V
2.54
9C10C0G221J050B
2.54
K221J15C0GF53L2
47 000
50 V
2.54
9C10Z5U473M050B
2.54
K473M15X7RF53L2
Note
(1) Listed according to most preferable used types
www.vishay.com
80
For technical questions, contact: [email protected]
Document Number: 45177
Revision: 18-Jan-06
Contents
Construction and Lead
Configuration .......................... 82
Electrical Data and
Dielectric Characteristics ........ 83
Multilayer
Ceramic
Dipped Radial
K10 Series
Capacitors
Dimensions and Marking ........ 88
Taping and Packaging ........... 90
General Information ............... 92
Mono-Kap ............................... 95
Ordering Information .............. 103
Construction and Lead Configuration
Vishay
Multilayer Ceramic Dipped Radial K10 Capacitors
INTERNAL CONSTRUCTION
Multilayer ceramic capacitors consist of electrodes, the
interleaved ceramic dielectric and the external terminal
connectors. The capacitance is given by the description:
A x n x ε0 x εr
C = ------------------------------------d
Termination
A = Electrode area
n = Number of active layers
Electrodes
d = Distance between electrodes
Dielectric
(Ceramic)
εr = Dielectric relative
ε0 = Dielectric constant
Whilst the values “A x n” and “d” are respectively determined
by the production process, the dielectric constant is a
function of the ceramic material used.
LEAD CONFIGURATION
Base material: FeCu
Plating: Electrolytic, tinned
COMPONTENT OUTLINES
www.vishay.com
82
For technical questions, contact: [email protected]
Document Number: 45178
Revision: 19-Jan-06
Electrical Data and Dielectric Characteristics
Vishay
Multilayer Ceramic Dipped Radial K10 Capacitors
DIELECTRIC CHARACTERISTICS
DIELECTRIC ACCORDING TO EIA
C0G (NP0)
X7R
Y5V
CG
C1 (2C1)
2F4
According to CECC
Capacitance Range:
at 1 MHz, 1 V; where C ≤ 1000 pF
10 pF to 1000 pF
-
-
at 1 kHz, 1 V; where C > 1000 pF
-
100 pF to 0.1 µF
0.01 µF to 0.1 µF
Tolerance on the Capacitance:
where C < 10 pF
± 0.5 pF (D)
-
-
where C > 10 pF
± 5 % (J); ± 10 % (K)
± 10 % (K); ± 20 % (M)
+ 80 %/- 20 % (Z)
Rated DC Voltage
50 V; 100 V
50 V; 100 V
50 V
Dielectric Strength
250 % of rated voltage
≥ 10 GΩ
Insulation Resistance (IR)
Temperature Coefficient of the Capacitance
0x
10-6/K
-
-
± 30 x 10-6/K
-
-
-
± 15 %
+ 22 %/- 82 %
at 1 MHz, 1 V; where C ≤ 1000 pF
1
---------------------------------400 + 20 x C
-
-
at 1 kHz, 1 V; where C > 1000 pF
≤ 0.1 %
≤ 2.5 %
≤5%
Tolerance of the Temperature Coefficient
Maximum Capacitance change with respect to
Capacitance at 25 °C
Dissipation Factor (DF)
Operating Temperature Range
- 55 °C to + 125 °C
Storage Temperature Range
- 30 °C to + 85 °C
25 °C ± 15 °C
Aging
-
typical 1 % per time decade typical 7 % per time decade
Note
• The capacitors meet the essential requirements of ‘EIA 198’.
Unless stated otherwise all electrical values apply at an ambient temperature of 25 °C ± 3 °C, at barometric pressures 650 mm to 800 mm of
mercury, and relative humidity not to exceed 75 %.
MAIN FEATURES
CLASS 1
CLASS 2
CLASS 3
APPLICATION
For temperature compensation of frequency
discriminating circuits and filters, coupling and
decoupling in high frequency circuits where
low losses and narrow capacitance tolerances
are demanded.
As coupling and decoupling
capacitors for such application
where higher losses and a
reduced capacitance stability
are tolerated.
As coupling and decoupling
capacitors for such application
where higher losses and a
reduced capacitance stability
are tolerated.
PROPERTIES
Temperature
Dependence
Capacitance
High stability of capacitance. Low dissipation
factor up to higher frequencies. Defined
temperature coefficient of capacitance,
positive or negative, linear and reversible.
High insulation resistance. No voltage
dependence. High long-term stability of
electrical values.
High capacitance values with
small dimensions.
Non-linear dependence of
capacitance on temperature.
High capacitance values with
small dimensions.
Non-linear dependence of
capacitance on temperature.
C0G (NP0)
X7R
Y5V
CG
2C1
2F4
CLASSIFICATION
Classification EIA:
Classification CECC:
Document Number: 45179
Revision: 19-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
83
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial K10
Capacitors
Vishay
TEMPERATURE CHARACTERISTICS OF CAPACITANCE FOR CLASS 2/3 CERAMIC DIELECTRICS
ACCORDING TO CECC 32100
CODE LETTER FOR
SUB CATEGORY
MAXIMUM CAPACITANCE CHANGE IN % AT
THE SPECIFIED TEMPERATURE RANGE
DESIGNATION OF THE SPECIFIED TEMPERATURE RANGE
- 55 °C/+ 125 °C
- 30 °C/+ 85 °C
4
WITHOUT RATED
VOLTAGE
WITH RATED
VOLTAGE
1
2C
± 20 %
+ 20 %/- 30 %
X
2F
+ 30 %/- 80 %
+ 30 %/- 90 %
X
EIA - CODING SYSTEM FOR CLASS 2/3 CERAMIC
K
TYPE
X
7
WORKING TEMPERATURE RANGE
LOWER TEMP.
LIMIT
UPPER TEMP.
LIMIT
X = - 55 °C
Y = - 30 °C
7 = + 125 °C
5 = + 85 °C
R
103
M
CAPACITANCE CHANGE WITHIN
WORKING TEMP. RANGE
NO RATED VOLTAGE APPLIED
CAPACITANCE
IN pF
TOLERANCE
R = ± 15 %
V = - 82 %/+ 22 %
The first two digits
gives the nominal
value, the third digit
indicates the number
of zeros, e.g. 103 =
10 000 pF
For values below
10 pF an R is
inserted in the
second position
instead of a decimal
point e.g.
2R2 = 2.2 pF
D = ± 0.50 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Z =+ 80 %/- 20 %
Example: Vishay BCcomponents Description
EIA Description
www.vishay.com
84
For technical questions, contact: [email protected]
Document Number: 45179
Revision: 19-Jan-06
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial K10
Capacitors
Vishay
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
1.5
1.0
0.5
0.0
- 0.5
NP0
- 1.0
- 1.5
- 2.0
- 100 - 75 - 50 - 25
0
25
50
VOLTAGE COEFFICIENT OF CAPACITANCE - NP0
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITANCE
2.0
75
0.2
0.1
0.0
- 0.1
- 0.2
0
100 125 150
10
20
TEMPERATURE (°C)
40
50
60
70
80
90
100
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
AGING RATE - NP0
ΔC CAPACITANCE CHANGE (%)
C
10 000
INSULATION RESISTANCE (ΩF)
30
1000
100
0.2
0.1
0.0
- 0.1
10
10
25
100 125
- 0.2
1
TEMPERATURE (°C)
Document Number: 45179
Revision: 19-Jan-06
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
www.vishay.com
85
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial K10
Capacitors
Vishay
X7R DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
VOLTAGE COEFFICIENT OF CAPACITANCE - X7R
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
15
10
5
0
X7R
-5
- 10
- 15
TEMPERATURE (°C)
- 20
- 100 - 75 - 50 - 25
0
25
50
5
0
-5
- 10
- 15
100 V
RATED
- 25
- 30
0
100 125 150
75
50 V
RATED
- 20
10
20
TEMPERATURE (°C)
30
40
50
60
70
80
90
100
VDC APPLIED
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
INSULATION RESISTANCE (ΩF)
10 000
1000
100
10
10
25
100 125
TEMPERATURE (°C)
AGING RATE - X7R
ΔC CAPACITANCE CHANGE (%)
C
DISSIPATION
DISSIPATION FACTOR VS. TEMPERATURE
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
1.0
0.0
- 1.0
- 2.0
X7R
2.0
1.5
1.0
- 3.0
0.5
0.0
- 4.0
- 75
- 50 - 25
0
25
50
75
100
125
1
TEMPERATURE (°C)
www.vishay.com
86
For technical questions, contact: [email protected]
10
100
1000
10 000
TIME (h)
Document Number: 45179
Revision: 19-Jan-06
Electrical Data and Dielectric Characteristics
Multilayer Ceramic Dipped Radial K10
Capacitors
Vishay
Y5V DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE - Y5V
ΔC CAPACITANCE CHANGE (%)
C
ΔC CAPACITANCE CHANGE (%)
C
TEMPERATURE COEFFICIENT OF CAPACITOR
60
40
20
Y5V
0
- 20
- 40
- 60
- 80
- 100
- 50
- 25
0
25
50
75
40
20
0
- 20
- 40
- 60
50 V
RATED
- 80
- 100
0
100
10
20
30
40
50
60
70
80
90
100
VDC APPLIED
TEMPERATURE (°C)
INSULATION RESISTANCE (ΩF)
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
100 000
10 000
1000
- 50
- 25
0
25
50
75
100
TEMPERATURE (°C)
DISSIPATION FACTOR VS. TEMPERATURE
AGING RATE - Y5V
ΔC CAPACITANCE CHANGE (%)
C
20
DISSIPATION
16
12
8
4
0
- 50
- 25
0
25
50
75
100
2
0
-2
-4
-6
-8
- 10
- 12
- 14
1
TEMPERATURE (°C)
Document Number: 45179
Revision: 19-Jan-06
For technical questions, contact: [email protected]
10
100
1000
TIME (h)
www.vishay.com
87
Dimensions and Marking
Vishay
Multilayer Ceramic Dipped Radial K10 Capacitors
DIMENSIONS
Wb
T
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
L2
H5
Component outline for
lead spacing 2.5 ± 0.8 mm
(straight leads)
Component outline for
lead spacing 5.0 ± 0.8 mm
(flat bent leads)
L2 and H5 are preferred styles
Wb
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
K2
K5
Component outline for
lead spacing 2.5 ± 0.8 mm
(outside kink)
Component outline for
lead spacing 5.0 ± 0.8 mm
(outside kink)
CAPACITOR DIMENSIONS AND WEIGHT in millimeter (inches)
MAX. SEATING HEIGHT (SH)
SIZE
10
Wbmax.
3.6
(0.142)
Hmax.
3.6
(0.142)
Tmax.
2.3
(0.090)
L2
H5
K2
K5
1.58
(0.062)
2.54
(0.100)
3.50
(0.140)
3.50
(0.140)
WEIGHT
(g)
≈ 0.10
Note
• Bulk packed types have a standard lead length L = 25.4 mm (1.0") minimum
• Thickness is defined as “T”
www.vishay.com
88
For technical questions, contact: [email protected]
Document Number: 45180
Revision: 19-Jan-06
Dimensions and Marking
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
MARKING
SIZE 10 CAPACITANCE VALUE < 100 pF
Vishay log
X X
t
t: Tolerance code
XX: Capacitance code
For example
Vishay logo
8 2
J
J: ± 5 %
82: 82 pF
SIZE 10 CAPACITANCE VALUE ≥ 100 pF
Vishay log
X X X
XXX: Capacitance code
For example
Vishay logo
1 0 2
102: 1000 pF
Note
• Vishay or BCcomponents logo can be marked on the products body
Document Number: 45180
Revision: 19-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
89
Taping and Packaging
Vishay
Multilayer Ceramic Dipped Radial K10 Capacitors
REEL DATA
REEL
A maximum of 0.5 % of the total number of capacitors per
reel may be missing.
55.1 Max.
+0
48 - 2.0
A maximum of 1 consecutive vacant positions is followed by
6 consecutive components.
355.6
Max.
Tape begins and ends with a minimum of 4 empty positions
(50 mm tape).
Maximum of 5 splicers per reel.
AMMOPACK DATA
A maximum of 0.5 % of the total number of capacitors per
box may be missing.
direction
of
unreeling
arbor hole
Ø 28 ± 1.0
A maximum of 2 consecutive vacant positions is followed by
6 consecutive components.
Tape begins and ends with a minimum of 4 empty positions
(50 mm tape).
Maximum of 5 splicers per reel.
REEL DIMENSIONS
H2
The cumulative pitch tolerance over 20 consecutive units is
not to exceed ± 1.0 mm.
Lead space (F) shall be measured at (3.6 ± 0.5) mm from the
capacitor seating plane.
LABELLING
L
Each reel is provided with a label showing the following
details:
Manufacturer, K style, capacitance, tolerance, batch
number, quantity of components, rated voltage, dielectric.
K
A
On special request other designations can be shown.
For example:
H1
REEL SIZE
(mm)
A
Outer Dia.
360
L
Hole Dia.
30
K
Core Dia.
90
H1
Internal Width
42
H2
External Width
51
AMMOPACK
290
335
50
www.vishay.com
90
For technical questions, contact: [email protected]
Document Number: 45181
Revision: 18-Sep-06
Taping and Packaging
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
PACKAGING QUANTITIES AND BOX DIMENSIONS
PACKAGING
SMALLEST PACKAGING
QUANTITY (SPQ)
BOX DIMENSIONS L x W x H
(mm)
Tape on reel
4000
370 x 370 x 60
Ammopack
2500
335 x 290 x 50
(1)
5000
245 x 120 x 65
Bulk
Note
(1) SPQ contains one or a multiple of poly-bags, 1000 units per bag
CAPACITORS ON TAPE
Δh
P
seating
plane
F
P1
H1
H0
H
L
W1
W
A
W0
L1
P0
D0
d
t
PARAMETER
SYMBOL
Cut off length
L
Lead end protrusion
Height to seating plane (straight leads)
Height to seating plane (formed leads)
DIMENSIONS
mm
inch
≤ 11
≤ 0.443
L1
≤1
≤ 0.039
H
≥ 18
≥ 0.709
H0
16 ± 0.5
0.630 ± 0.020
Top of component height
H1
≤ 32
≤ 1.260
Body inclination
Δh
0.0 ± 1.0
0 ± 0.039
Carrier tape width
W
18 + 1.0/- 0.5
0.709 + 0.039/- 0.020
Hold down tape width
W0
15 ref. (1)
0.591 ref. (1)
Sprocket hole position
W1
9 + 0.075/- 0.5
0.354 + 0.030/- 0.020
2.5 + 0.6/- 0.4
0.100 + 0.024/- 0.016
5.0 + 0.6/- 0.4
0.200 + 0.024/- 0.016
12.7 ± 0.3
0.500 ± 0.012
1e lead space (2)
2e lead space (2)
Sprocket hole pitch
1e sprocket hole centre to lead centre
2e sprocket hole centre to lead centre
F
P0
P1
5.08 ± 0.7
0.200 ± 0.028
3.85 ± 0.7
0.150 ± 0.028
0.157 ± 0.008
Sprocket hole diameter
D0
4.0 ± 0.2
Overall tape thickness
t
≤ 0.9
≤ 0.035
Wire lead diameter
d
0.5 ± 0.05
0.02 ± 0.002
Pitch
P
12.7 ± 1.0
0.50 ± 0.039
Notes
(1) Tape width of 6 mm (0.236") permissible
(2) e = 2.54 mm
Document Number: 45181
Revision: 18-Sep-06
For technical questions, contact: [email protected]
www.vishay.com
91
General Information
Vishay
Multilayer Ceramic Dipped Radial K10 Capacitors
STORAGE
The capacitors must not be stored in a corrosive atmosphere where sulfide or chloride gas, acid, alkali, or salt are present.
Moisture exposure should also be avoided.
The solderability of the leads is not affected by storage of up to 24 months. Temperature + 10 °C to + 35 °C, relative humidity up
to 60 %.
With reference to class 2 ceramic dielectric capacitors, see the last page of this general information.
SOLDERING
SOLDERING SPECIFICATIONS
Soldering test for capacitors with wire leads: (According to IEC 60068-2-20, solder bath method)
Soldering temperature
Soldering duration
Distance from component body
SOLDERABILITY
RESISTANCE TO SOLDERING HEAT
235 °C ± 5 °C
260 °C ± 5 °C
2 s ± 0.5 s
10 s ± 1 s
≥ 2 mm
≥ 5 mm
SOLDERING RECOMMENDATIONS
Soldering of the component should be achieved using a Sn96.5/Ag3.0/Cu0.5, a Sn60/40 type or a silver-bearing type solder.
As ceramic capacitors are very sensitive to rapid changes in temperature (thermal shock), the solder heat resistance specification
(see above table) should not be exceeded.
Subjecting the capacitor to excessive heat may result in thermal shocks that can crack the ceramic body and melt the internal
solder junction.
CLEANING
The components should be cleaned with vapor degreasers immediately following the soldering operation.
SOLVENT RESISTANCE AND FLAME ABILITY
The coating and marking of the capacitors are resistant to the following test method: IEC 60068-2-45 (Method XA). The epoxy
material is approved according to UL 94 V-0.
MOUNTING
We do not recommend modifying the lead terminals, e.g. bending or cropping as this action could break the coating or crack the
ceramic insert. However, if the lead must be modified in such a way, we recommend supporting the lead with a clamping fixture
next to the coating.
www.vishay.com
92
For technical questions, contact: [email protected]
Document Number: 45182
Revision: 26-Sep-07
General Information
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
CAPACITANCE “AGING” OF CERAMIC CAPACITORS
Following the final heat treatment, all class 2 ceramic capacitors reduce their capacitance value. According to logarithmic law,
this is due to their special crystalline construction. This change is called “aging”. If the capacitors are heat treated (for example
when soldering), the capacitance increases again to a higher value deaging, and the aging process begins again.
Note
• The level of this deaging is dependent on the temperature and the duration of the heat; an almost complete deaging is achieved at 150 °C in
one hour. These conditions also form the basis for reference measurements when testing. The capacitance change per time decade (aging
constant) differs for the various types of ceramic, but typical values can be taken from the equations below.
100 x ( C 11 - C 12 )
k = ---------------------------------------------C 11 x log 10 ( t 2 /t 1 )
t1, t2 = measuring time point (h)
C11, C12 = capacitance values for the times t1, t2
C 12 = C 11 x ( 1 - k/100 x log 10 ( t 2 /t 1 ) )
k = aging constant (%)
REFERENCE MEASUREMENT
Due to aging, it is necessary to quote an age for reference measurements which can be related to the capacitance with fixed
tolerance. According to EN 130700, this time period is 1000 h.
If the shelf-life of the capacitor is known, the capacitance for t = 1000 h can be calculated with the aging constant.
In order to avoid the influence of aging, it is important to deage the capacitors before stress-testing. The following procedure is
adopted (see also EN 130700):
• Deaging at 125 °C, 1 h
• Storage for 24 h at normal climate temperature
• Initial measurement
• Stress
• Deaging at 125 °C, 1 h
• Storage for 24 h at normal climate temperature
• Final measurement
Document Number: 45182
Revision: 26-Sep-07
For technical questions, contact: [email protected]
www.vishay.com
93
General Information
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
CAUTION
1. OPERATING VOLTAGE AND FREQUENCY CHARACTERISTIC
When sinusiodal or ripple voltage applied to DC Ceramic Disc Capacitors, be sure to maintain the peak-to-peak value or the peak
value of the sum of both AC + DC within the rated voltage.
When start or stop applying the voltage, resonance may generate irregular voltage.
When rectangular or Pulse Wave Voltage is applied to DC Ceramic Disc Capacitors, the self-heating generated by the capacitor
is higher than the sinusoidal application with the same frequency. The allowable voltage rating for the rectangular or pulse wave
corresponds approximately with the allowable voltage of a sinusoidal wave with the double fundamental frequency.
The allowable voltage varies, depending on the voltage and the waveform.
Diagrams of the limiting values are available for each capacitor series on request.
VOLTAGE
Waveform
Figure
DC
V0-p
DC + AC
Vp-p
V0-p
0
AC
0
0
2. OPERATING TEMPERATURE AND SELF-GENERATED HEAT
The surface temperature of the capacitors must not exceed the upper limit of its Rated Operating Temperature.
During operation in a high-frequency circuit or a pulse signal circuit, the capacitor itself generates heat due to dielectric losses.
Applied voltage should be the load such as self-generated heat is within 20 °C on the condition of environmental temperature
25 °C.
Note, that excessive heat may lead to deterioration of the capacitor’s characteristics.
www.vishay.com
94
For technical questions, contact: [email protected]
Document Number: 45182
Revision: 26-Sep-07
Mono-Kap
Vishay
Multilayer Ceramic Dipped Radial K10 Capacitors
DIMENSIONS
Wb
T
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
L2
H5
Component outline for
lead spacing 2.5 mm ± 0.8 mm
(straight leads)
Component outline for
lead spacing 5.0 mm ± 0.8 mm
(flat bent leads)
L2 and H5 are preferred styles
Wb
Wb
H
H
SH
SH
L
L
5.0 ± 0.8
2.5 ± 0.8
K2
K5
Component outline for
lead spacing 2.5 mm ± 0.8 mm
(outside kink)
Component outline for
lead spacing 5.0 mm ± 0.8 mm
(outside kink)
CAPACITOR DIMENSIONS AND WEIGHT in millimeter (inches)
MAX. SEATING HEIGHT (SH)
SIZE
10
Wbmax.
3.6
(0.142)
Hmax.
3.6
(0.142)
Tmax.
2.3
(0.090)
L2
H5
K2
K5
1.58
(0.062)
2.54
(0.100)
3.50
(0.140)
3.50
(0.140)
WEIGHT
(g)
≈ 0.10
Note
• Bulk packed types have a standard lead length L = 25.4 mm (1.0") minimum
• Thickness is defined as “T”
Document Number: 45183
Revision: 16-Nov-09
For technical questions, contact: [email protected]
www.vishay.com
95
Mono-Kap
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Capacitance range
10 pF to 1000 pF
Rated DC voltage
50 V
Tolerance on capacitance
100 pF to 0.1 µF
100 V
50 V
0.01 µF to 0.15 µF
100 V
50 V
± 5 %, ± 10 %
± 10 %, ± 20 %
+ 80 %/- 20 %
C0G (NP0)
X7R
Y5V
Dielectric Code
ORDERING INFORMATION
K
103
K
10
X7R
F
5
3
H
5
PRODUCT
TYPE
CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
SIZE
CODE
TEMP.
CHAR.
RATED
VOLTAGE
LEAD
DIA.
LEAD LENGTH/
PACKAGING
LEAD
STYLE
LEAD
SPACING
K=
Mono-Kap
Two significant
digits followed by
the number of
zeros.
For example:
103 = 10 000 pF
J=±5%
K = ± 10 %
M = ± 20 %
Z = + 80%/- 20 %
Ref.
mech.
spec.
C0G
X7R
Y5V
F=
50 VDC
H=
100 VDC
5=
0.5 mm
(0.020")
3 = Bulk, with lead
length of 30 ± 5.0
mm (1.25")
T = Tape and reel
U = Ammopack
L=
Straight
Lead
H=
High
seated
assy
2=
2.5 (0.100")
5=
5.0 (0.200")
Ordering Example: K-103-K-10-X7R-F-5-3-H-5
www.vishay.com
96
For technical questions, contact: [email protected]
Document Number: 45183
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
CAPACITANCE RANGE CHART
C0G (NP0) DIELECTRIC
SIZE
RATED VOLTAGE
VALUE
CODE
10 pF
100
12 pF
120
15 pF
150
18 pF
180
22 pF
220
27 pF
270
33 pF
330
39 pF
390
47 pF
470
56 pF
560
68 pF
680
82 pF
820
100 pF
101
120 pF
121
150 pF
151
180 pF
181
220 pF
221
270 pF
271
330 pF
331
390 pF
391
470 pF
471
560 pF
561
680 pF
681
820 pF
821
1000 pF
102
1200 pF
122
1500 pF
152
1800 pF
182
2200 pF
222
2700 pF
272
3300 pF
332
3900 pF
392
4700 pF
472
5600 pF
562
6800 pF
682
8200 pF
822
0.01 µF
103
X7R DIELECTRIC
10
50
100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Y5V DIELECTRIC
SIZE
RATED VOLTAGE
VALUE
CODE
0.01 µF
103
0.015 µF
153
0.022 µF
223
0.033 µF
333
0.047 µF
473
0.068 µF
683
0.10 µF
104
0.15 µF
154
0.22 µF
224
0.33 µF
334
0.47 µF
474
0.68 µF
684
1.0 µF
105
Document Number: 45183
Revision: 16-Nov-09
10
50
•
•
•
•
•
•
•
•
SIZE
RATED VOLTAGE
VALUE
CODE
100 pF
101
120 pF
121
150 pF
151
180 pF
181
220 pF
221
270 pF
271
330 pF
331
390 pF
391
470 pF
471
560 pF
561
680 pF
681
820 pF
821
1000 pF
102
1200 pF
122
1500 pF
152
1800 pF
182
2200 pF
222
2700 pF
272
3300 pF
332
3900 pF
392
4700 pF
472
5600 pF
562
6800 pF
682
8200 pF
822
0.01 µF
103
0.012 µF
123
0.015 µF
153
0.018 µF
183
0.022 µF
223
0.027 µF
273
0.033 µF
333
0.039 µF
393
0.047 µF
473
0.056 µF
563
0.068 µF
683
0.082 µF
823
0.10 µF
104
0.12 µF
124
0.15 µF
154
0.22 µF
224
0.33 µF
334
0.47 µF
474
0.68 µF
684
1.0 µF
105
For technical questions, contact: [email protected]
10
50
100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
www.vishay.com
97
Mono-Kap
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
PART NUMBER LISTING - if not in range chart, please contact [email protected]
MONO-KAP Y5V - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
10 000
15 000
15 000
22 000
22 000
33 000
33 000
47 000
47 000
68 000
68 000
100 000
100 000
150 000
150 000
RATED VOLTAGE (VDC)
+ 80 %/- 20 % TOLERANCE
13th digit (T = Reel, U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
50
K103Z10Y5VF5.L2
K153Z10Y5VF5.H5
K153Z10Y5VF5.L2
K223Z10Y5VF5.H5
K223Z10Y5VF5.L2
K333Z10Y5VF5.H5
K333Z10Y5VF5.L2
K473Z10Y5VF5.H5
K473Z10Y5VF5.L2
K683Z10Y5VF5.H5
K683Z10Y5VF5.L2
K104Z10Y5VF5.H5
K104Z10Y5VF5.L2
K154Z10Y5VF5.H5
K154Z10Y5VF5.L2
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
MONO-KAP X7R - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
100
100
120
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
820
820
1000
1000
1200
1200
1500
1500
www.vishay.com
98
RATED VOLTAGE (VDC)
50
10 % TOLERANCE
13th digit (1)
(T = Reel, U = Ammo, 3 = Bulk)
K101K10X7RF5.L2
K101K10X7RF5.H5
K121K10X7RF5.L2
K121K10X7RF5.H5
K151K10X7RF5.L2
K151K10X7RF5.H5
K181K10X7RF5.L2
K181K10X7RF5.H5
K221K10X7RF5.L2
K221K10X7RF5.H5
K271K10X7RF5.L2
K271K10X7RF5.H5
K331K10X7RF5.L2
K331K10X7RF5.H5
K391K10X7RF5.L2
K391K10X7RF5.H5
K471K10X7RF5.L2
K471K10X7RF5.H5
K561K10X7RF5.L2
K561K10X7RF5.H5
K681K10X7RF5.L2
K681K10X7RF5.H5
K821K10X7RF5.L2
K821K10X7RF5.H5
K102K10X7RF5.L2
K102K10X7RF5.H5
K122K10X7RF5.L2
K122K10X7RF5.H5
K152K10X7RF5.L2
K152K10X7RF5.H5
For technical questions, contact: [email protected]
LEAD SPACING
mm (inch)
2.5 mm (0.20)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
Document Number: 45183
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
MONO-KAP X7R - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
1800
1800
2200
2200
2700
2700
3300
3300
3900
3900
4700
4700
5600
5600
6800
6800
8200
8200
10 000
10 000
12 000
12 000
15 000
15 000
18 000
18 000
22 000
22 000
27 000
27 000
33 000
33 000
39 000
39 000
39 000
39 000
47 000
47 000
47 000
47 000
56 000
56 000
56 000
56 000
68 000
68 000
82 000
82 000
100 000
100 000
RATED VOLTAGE (VDC)
50
10 % TOLERANCE
13th digit (1)
(T = Reel, U = Ammo, 3 = Bulk)
K182K10X7RF5.L2
K182K10X7RF5.H5
K222K10X7RF5.L2
K222K10X7RF5.H5
K272K10X7RF5.L2
K272K10X7RF5.H5
K332K10X7RF5.L2
K332K10X7RF5.H5
K392K10X7RF5.L2
K392K10X7RF5.H5
K472K10X7RF5.L2
K472K10X7RF5.H5
K562K10X7RF5.L2
K562K10X7RF5.H5
K682K10X7RF5.L2
K682K10X7RF5.H5
K822K10X7RF5.L2
K822K10X7RF5.H5
K103K10X7RF5.L2
K103K10X7RF5.H5
K123K10X7RF5.L2
K123K10X7RF5.H5
K153K10X7RF5.L2
K153K10X7RF5.H5
K183K10X7RF5.L2
K183K10X7RF5.H5
K223K10X7RF5.L2
K223K10X7RF5.H5
K273K10X7RF5.L2
K273K10X7RF5.H5
K333K10X7RF5.L2
K333K10X7RF5.H5
K393K10X7RF5.L2
K393K10X7RF5.H5
K393K10X7RF5.L2
K393K10X7RF5.H5
K473K10X7RF5.L2
K473K10X7RF5.H5
K473K10X7RF5.L2
K473K10X7RF5.H5
K563K10X7RF5.L2
K563K10X7RF5.H5
K563K10X7RF5.L2
K563K10X7RF5.H5
K683K10X7RF5.L2
K683K10X7RF5.H5
K823K10X7RF5.L2
K823K10X7RF5.H5
K104K10X7RF5.L2
K104K10X7RF5.H5
LEAD SPACING
mm (inch)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
Note
(1) 20 % tolerance available
Document Number: 45183
Revision: 16-Nov-09
For technical questions, contact: [email protected]
www.vishay.com
99
Mono-Kap
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
MONO-KAP C0G - 50 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
10
10
12
12
15
15
18
18
22
22
27
27
33
33
39
39
47
47
56
56
68
68
82
82
100
100
120
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
820
820
1000
1000
RATED VOLTAGE (VDC)
50
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
K100J10C0GF5.L2
K100J10C0GF5.H5
K120J10C0GF5.L2
K120J10C0GF5.H5
K150J10C0GF5.L2
K150J10C0GF5.H5
K180J10C0GF5.L2
K180J10C0GF5.H5
K220J10C0GF5.L2
K220J10C0GF5.H5
K270J10C0GF5.L2
K270J10C0GF5.H5
K330J10C0GF5.L2
K330J10C0GF5.H5
K390J10C0GF5.L2
K390J10C0GF5.H5
K470J10C0GF5.L2
K470J10C0GF5.H5
K560J10C0GF5.L2
K560J10C0GF5.H5
K680J10C0GF5.L2
K680J10C0GF5.H5
K820J10C0GF5.L2
K820J10C0GF5.H5
K101J10C0GF5.L2
K101J10C0GF5.H5
K121J10C0GF5.L2
K121J10C0GF5.H5
K151J10C0GF5.L2
K151J10C0GF5.H5
K181J10C0GF5.L2
K181J10C0GF5.H5
K221J10C0GF5.L2
K221J10C0GF5.H5
K271J10C0GF5.L2
K271J10C0GF5.H5
K331J10C0GF5.L2
K331J10C0GF5.H5
K391J10C0GF5.L2
K391J10C0GF5.H5
K471J10C0GF5.L2
K471J10C0GF5.H5
K561J10C0GF5.L2
K561J10C0GF5.H5
K681J10C0GF5.L2
K681J10C0GF5.H5
K821J10C0GF5.L2
K821J10C0GF5.H5
K102J10C0GF5.L2
K102J10C0GF5.H5
LEAD SPACING
mm (inch)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
Note
(1) 10 % tolerance available
www.vishay.com
100
For technical questions, contact: [email protected]
Document Number: 45183
Revision: 16-Nov-09
Mono-Kap
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
MONO-KAP X7R - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
100
100
120
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
680
680
820
820
1000
1000
1200
1200
1500
1500
1800
1800
2200
2200
2700
2700
3300
3300
3900
3900
4700
4700
5600
5600
6800
6800
8200
8200
10 000
10 000
RATED VOLTAGE (VDC)
100
10 % TOLERANCE
13th digit
(T = Reel, U = Ammo, 3 = Bulk)
K101K10X7RH5.L2
K101K10X7RH5.H5
K121K10X7RH5.L2
K121K10X7RH5.H5
K151K10X7RH5.L2
K151K10X7RH5.H5
K181K10X7RH5.L2
K181K10X7RH5.H5
K221K10X7RH5.L2
K221K10X7RH5.H5
K271K10X7RH5.L2
K271K10X7RH5.H5
K331K10X7RH5.L2
K331K10X7RH5.H5
K391K10X7RH5.L2
K391K10X7RH5.H5
K471K10X7RH5.L2
K471K10X7RH5.H5
K561K10X7RH5.L2
K561K10X7RH5.H5
K681K10X7RH5.L2
K681K10X7RH5.H5
K821K10X7RH5.L2
K821K10X7RH5.H5
K102K10X7RH5.L2
K102K10X7RH5.H5
K122K10X7RH5.L2
K122K10X7RH5.H5
K152K10X7RH5.L2
K152K10X7RH5.H5
K182K10X7RH5.L2
K182K10X7RH5.H5
K222K10X7RH5.L2
K222K10X7RH5.H5
K272K10X7RH5.L2
K272K10X7RH5.H5
K332K10X7RH5.L2
K332K10X7RH5.H5
K392K10X7RH5.L2
K392K10X7RH5.H5
K472K10X7RH5.L2
K472K10X7RH5.H5
K562K10X7RH5.L2
K562K10X7RH5.H5
K682K10X7RH5.L2
K682K10X7RH5.H5
K822K10X7RH5.L2
K822K10X7RH5.H5
K103K10X7RH5.L2
K103K10X7RH5.H5
LEAD SPACING
mm (inch)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
Note
(1) 20 % tolerance available
Document Number: 45183
Revision: 16-Nov-09
For technical questions, contact: [email protected]
www.vishay.com
101
Mono-Kap
Multilayer Ceramic Dipped Radial K10 Capacitors
Vishay
MONO-KAP C0G - 100 VDC CLEAR TEXT CODE
CAPACITANCE (pF)
10
10
12
12
15
15
18
18
22
22
27
27
27
27
33
33
39
39
47
47
56
56
68
68
82
82
100
100
120
120
150
150
180
180
220
220
270
270
330
330
390
390
470
470
560
560
RATED VOLTAGE (VDC)
5 % TOLERANCE
13th digit (T = Reel,
U = Ammo, 3 = Bulk)
LEAD SPACING
mm (inch)
100
K100J10C0GH5.L2
K100J10C0GH5.H5
K120J10C0GH5.L2
K120J10C0GH5.H5
K150J10C0GH5.L2
K150J10C0GH5.H5
K180J10C0GH5.L2
K180J10C0GH5.H5
K220J10C0GH5.L2
K220J10C0GH5.H5
K270J10C0GH5.L2
K270J10C0GH5.H5
K270J10C0GH5.L2
K270J10C0GH5.H5
K330J10C0GH5.L2
K330J10C0GH5.H5
K390J10C0GH5.L2
K390J10C0GH5.H5
K470J10C0GH5.L2
K470J10C0GH5.H5
K560J10C0GH5.L2
K560J10C0GH5.H5
K680J10C0GH5.L2
K680J10C0GH5.H5
K820J10C0GH5.L2
K820J10C0GH5.H5
K101J10C0GH5.L2
K101J10C0GH5.H5
K121J10C0GH5.L2
K121J10C0GH5.H5
K151J10C0GH5.L2
K151J10C0GH5.H5
K181J10C0GH5.L2
K181J10C0GH5.H5
K221J10C0GH5.L2
K221J10C0GH5.H5
K271J10C0GH5.L2
K271J10C0GH5.H5
K331J10C0GH5.L2
K331J10C0GH5.H5
K391J10C0GH5.L2
K391J10C0GH5.H5
K471J10C0GH5.L2
K471J10C0GH5.H5
K561J10C0GH5.L2
K561J10C0GH5.H5
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
2.5 mm (0.10)
5.0 mm (0.20)
Note
(1) 10 % tolerance available
www.vishay.com
102
For technical questions, contact: [email protected]
Document Number: 45183
Revision: 16-Nov-09
Ordering Information
Vishay
Multilayer Ceramic Dipped Radial Capacitors
C0G, X7R, and Y5V Dielectric Capacitors
RADIAL ORDERING INFORMATION
K
103
K
10
X7R
F
5
3
H
5
PRODUCT
TYPE
CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
SIZE
CODE
TEMP.
CHAR.
RATED
VOLTAGE
LEAD
DIA.
LEAD LENGTH/
PACKAGING
LEAD
STYLE
LEAD
SPACING
K=
Mono-Kap
J=±5%
10 pF to 1.0 µF
K = ± 10 %
(3 digit code).
M = ± 20 %
First two digits are
significant. Third Z = + 80 %/- 20 %
digit is number of
zeros.
For example:
100 = 10 pF,
101 = 100 pF,
332 = 3300 pF,
103 = 10 000 pF
= 0.01 µF.
Values less
than 10 pF:
109 = 1.0 pF,
479 = 4.7 pF
10
(0603)
C0G
X7R
Y5V
F = 50 VDC
H = 100 VDC
5=
0.5 mm
(0.20")
3 = Bulk
U = Ammopack
T = Tape and reel
L=
Straight
Lead
H=
High
seated
assy
2=
2.5 (0.100")
5=
5.0 (0.200")
Document Number: 45184
Revision: 19-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
103
Notes
Vishay
www.vishay.com
104
Notes
Vishay
www.vishay.com
105
Notes
Vishay
www.vishay.com
106
Build Vishay
into your Design
worldwide sales contacts
Visit www.vishay.com for product information or select below
for a current list of sales offices, representatives, and distributors.
The Americas
EUROPE
United States
Germany
Vishay Americas
One Greenwich Place
Shelton, CT 06484
United States
Ph: +1-402-563-6866
Fax: +1-402-563-6296
Vishay Electronic GmbH
Geheimrat-Rosenthal-Str. 100
95100 Selb
Germany
Ph: +49-9287-71-0
Fax: +49-9287-70435
Asia
France
Singapore
Vishay S.A.
199, BLVD DE LA MADELEINE
06003 NICE, CEDEX 1
France
Ph: +33-4-9337-2727
Fax: +33-4-9337-2726
Vishay intertechnology
Asia Pte Ltd.
37A Tampines Street 92 #07-00
Singapore 528886
Ph: +65-6788-6668
Fax: +65-6788-0988
P.R. China
Vishay Trading (Shanghai) Co., Ltd.
15D, SUN TONG INFOPORT PLAZA
55 HUAI HAI WEST ROAD
SHANGHAI 200030
P.R. China
PH: +86-21-5258-5000
FAX: +86-21-5258-7979
UNITED KINGDOM
VISHAY LTD.
Suite 6C, Tower House
St. Catherine’s Court
Sunderland Enterprise Park
Sunderland SR5 3XJ
united kingdom
Ph: +44-191-516-8584
Fax: +44-191-549-9556
Japan
vishay japan CO., LTD.
MG Ikenohata Bldg. 4F
1-2-18, Ikenohata
Taito-ku
Tokyo 110-0008
Japan
Ph: +81-3-5832-6210
fax: +81-3-5832-6260
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
MLCC DIPPED AXIAL AND RADIAL
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
D ata B ook
World Headquarters
Vishay Intertechnology, Inc.
63 Lancaster Avenue
Malvern, PA 19355-2143
United States
© Copyright 2009 Vishay Intertechnology, Inc.
® Registered trademarks of Vishay Intertechnology, Inc.
All rights reserved. Printed in Germany.
Specifications subject to change without notice.
w w w. v i s h a y. c o m
VSE-DB0074-0911