CHR Series Non-magnetic Chip Resistors • • • • • • • • Resistances from 1 Ohm to 10M Ohms Power Rating 0.05 to 2Watt Resistance Tolerances to ± 0.5% TCR’s to ± 50 ppm/°C Non-Magnetic (contact PtAg) Suitable for Gluing or Soldering Sizes: 0402 / 0603 / 0805 / 1206 / 2010 / 2512 / 4020 Special High Temperature Version to 300°C (H) (See ordering Information below) SPECIFICATIONS Type 0402 0603 0805 1206 2010 2512 4020 Power Rating ( W ) 0.05 0.10 0.125 0.25 0.50 1.0 3 2.0 3 Trimmed 30 75 100 200 250 300 500 Untrimmed (≥ 5% tol.) 60 150 200 400 900 1200 1200 Working 2 Voltage ( VAC ) Resistance Range (Ω) Tolerances Available ( % ) Temperature Coefficients Available ( ± ppm/°C ) 1 (others upon request) 1Ω - <10Ω 10% to 20% 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 10Ω - <100Ω 5% to 10% 100 2% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 100Ω - 1M 1% to 10% 50 / 100 1% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 >1M - 10M 5% to 20% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1) TCR: in ppm/C; +25°C...+125°C; TCR below standard TCR (highest value): +25°C...+85°C 2) Continuous operating voltage (U_, Ueff): V ≤ #(P*R) or max. working voltage (the lower value) 3) Solder pads must be sufficiently large to keep resistors’s peak temperature below rating Specification Value Temperature Range -55°C to +155°C (Standard) -55°C to +125°C (50ppm/°C Parts) -55°C to +300°C (High Temperature Version, TCR valid +25°C to +125°C ) Climactic Cetegory 55 / 155 / 56 Solderability 250°C / 3s (up to 6 months after shipment or 12 monts at storage in Nitrogen) Max. Soldering Temperature 260°C / 10s Riedon Inc. 12/15 300 Cypress Avenue Alhambra CA 91801 www.riedon.com (626) 284-9901 (626) 284-1704 CHR Series Non-magnetic Chip Resistors SPECIFICATIONS (continued) Max ∆R Long Term Stability <10Ω 10Ω - 10M Storage 125°C / 1000h ±1% ±0.5% Storage 155°C / 1000h ±2% ±1% Load Life / P=70% / 70°C / 1000h ±1% ±0.5% ±0.5% ±0.25% ±1% ±0.5% Short term overload Humidity / 96%RH / 40°C / 56 days This part is RoHS complian with exemption 7(c)-I, as authorized by 2011/b5/EU. RoHS Compliant Exemption Dimensions Type L B D C CHR 0402 / CHR 0402H 0.95 +0.10 / 0.05 0.48 +0.10 / -0.05 0.28 +0.1 / -0.05 0.1 +0.1 / -0.05 CHR 0603 / CHR 0603H 1.5 +0.15 / -0.05 0.8 +0.15 / -0.05 0.4 +0.15 / -0.05 0.2 +0.2 / -0.1 CHR 0805 / CHR 0805H 2.0 +0.15 / -0.05 1.25 +0.15 / -0.05 0.4 +0.15 / -0.05 0.3 +0.2 / -0.1 CHR 1206 / CHR 1206H 3.2 +0.15 / -0.05 1.5 +0.2 / -0.05 0.4 +0.15 / -0.05 0.3 +0.2 / -0.1 CHR 2010 / CHR 2010H 5.1 +0.15 / -0.05 2.5 +0.2 / -0.05 0.6 +0.20 / -0.1 1.2 ±0.2 CHR 2512 / CHR 2512H 6.3 +0.15 / -0.05 3.5 +0.2 / -0.05 0.6 +0.15 / -0.05 0.9 ±0.2 CHR 4020 / CHR 4020H 10.2 +0.15 / -0.05 5.1 +0.2 / -0.05 0.6 +0.15 / -0.05 0.9 ±0.2 Packaging: Power Derating Curve Bulk or Blistertape to IEC 60286-3 120 Tape width 8mm / Reel Diameter 180 or 330mm Minimum quantity Bulk / 100 pieces per value Minimum quantity Tape & Reel / 500 pieces per value (Note: Except size 0402 / 1000 pieces per value) Alhambra CA 91801 www.riedon.com n 12/15 300 Cypress Avenue si o Riedon Inc. er )V ard 40 20 0 0 High Temperature Part Description (H): Part Type H - Resistance - Tolerance - TCR Example: CHR 0805H 50 kOhms 10% 50ppm ( Note: if no TCR is specified, the highest value will be supplied ) (H 60 nd Standard Part Description: Part Type - Resistance - Tolerance - TCR Example: CHR 0603 10 kOhms 5% 50ppm ( Note: if no TCR is specified, the highest value will be supplied ) 80 Sta Ordering Information Power ( % ) 100 50 100 150 200 250 300 350 Ambient Temperature (°C) (626) 284-9901 (626) 284-1704