RoHS PS120 Power Shielded Inductor .393 10.0 .484 12.3 Dimensions: Inches (mm) .460 11.7 .504 .050 (12.8) 12.8 .078±.007 2.0±0.2 .275 7.0 .137±.007 3.5±0.2 .212 .213 5.4 .4) .114 .276 2.9 (7.0) Allied Part Number PS120-R22M-RC Inductance (µH) Tolerance (±%) Test Frequency (KHz, 0.5V) RDC mΩ Max Isat (A) Max Irms (A) Max .22 20 100 1.5 55 37 1.5 45 37 1.8 45 35 PS120-R33M-RC .33 20 100 PS120-R47M-RC .47 20 100 PS120-R56M-RC .56 20 100 1.8 35 35 PS120-R68M-RC .68 20 100 1.8 33 35 PS120-R82M-RC .82 20 100 2.4 31 30 PS120-1R0M-RC 1.0 20 100 2.4 28 30 PS120-1R5M-RC 1.5 20 100 3.5 24 25 20 100 4.7 18 21 6.3 14 15 PS120-2R2M-RC 2.2 PS120-3R3M-RC 3.3 20 100 PS120-4R7M-RC 4.7 20 100 8.8 11 12 PS120-6R8M-RC 6.8 20 100 12.5 9 10 PS120-8R2M-RC 8.2 20 100 13.0 7 9 PS120-100M-RC 10.0 20 100 18.7 6 8 Features • • • • • SMD Ultra High Current up to 50A Isat Magnetically Shielded Construction Designed for low buzz noise Low DC Resistance Suitable for pick and place Electrical Inductance Range: .22µH to 10µH additonal values available. Tolerance: 20% over entire range Available in tighter tolerances Test Frequency: 100KHz Operating Temp: -40ºC to +125ºC Temp. Rise: ∆ =40ºC Typical at rated Irms without without core loss. Part temperature should not exceed 125ºC including temperature rise. Inductance drop: 20% typical at rated Isat All specifications subject to change without notice. Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): WK4237 Meter RDC: HK502BC Meter Isat/Irms: WK3260B & DC Bias 3265B WK Physical Packaging: 300 pieces per 13 inch reel. Marking: EIA Inductance Code 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 15 07/17/15 www.alliedcomponents.com