KEMET Organic Capacitor (KO-CAP®) PRODUCTS Electronic Components T540/ T541 High Reliability Commercial-Off-the-Shelf (COTS) Polymer Electrolytic Why Choose KEMET Programs Supported KEMET Electronics Corporation is a leading global supplier of electronic components. We offer our customers the broadest selection of capacitor technologies in the industry, along with an expanding range of electromechanical devices, electromagnetic compatibility solutions and supercapacitors. Our vision is to be the preferred supplier of electronic component solutions for customers demanding the highest standards of quality, delivery and service. Decoupling and filtering in defense and aerospace applications that require very low ESR: • Radar • Sonar • Power supplies • Guidance systems T540 T541 Features & Benefits • KO-CAP® Reliability Assessment method – Failure rates available: • B = 0.1%/1,000 hours • C = 0.01%/1,000 hours • D = 0.001%/1,000 hours • High frequency capacitance retention • Benign failure mode • Volumetrically efficient • High ripple current capability • Use at up to 90% of rated voltage (10% derating) for part types ≤10 V • Use at up to 80% of rated voltage (20% derating) for part types >10 V • Very low ESR down to 5 mΩ • Sn/Pb standard terminations • Surge current testing options per MIL-PRF-55365 • 100% steady state aging • Approved for DLA Drawings 04051 & 04052 • Polymer cathode technology • Operating temperature up to +125°C • EIA standard case sizes Electrical/Physical Characteristics & Competition Case Sizes Dielectric Operating Temperature Range (°C) Capacitance Range Capacitance Tolerance Voltage Range (VDC) DF (120 Hz) ESR (mΩ) at (100 kHz) Leakage Current (μA) -55 to +125 4.7 – 680 µF M Tolerance (20%) 2.5 to 63 ≥10% 25 – 150 ≤ 0.1 CV at rated voltage after 5 minutes -55 to +125 10 – 1, 500 µF M Tolerance (20%) 2.5 to 63 8% 5 – 150 ≤ 0.1 CV at rated voltage after 5 minutes T540 B/3528-21 C/6032-28 D/7343-31 Polymer Electrolytic T541 D/7343-31 X/7343-43 Y/7343-40 Polymer Electrolytic Product Checklist • Does your program require established reliability products? • What is the circuit switching frequency? • What is the circuit operating voltage? • Are there any voltage spikes expected? • Are there any environmental concerns? • What are the physical space restrictions? For more information, samples and engineering kits, please visit us at www.kemet.com or call 1.877.myKEMET. SA1115 Copyright © 2015 KEMET KEMET Organic Capacitor (KO-CAP®) PRODUCTS Electronic Components T540/ T541 High Reliability Commercial-Off-the-Shelf (COTS) Polymer Electrolytic Ordering Information T540 T 540 D 107 M 10 A H 65 10 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Failure Rate/ Design Termination Finish Surge Option ESR T= Tantalum 540 = Polymer COTS B, C, D, First two digits represent significant figures. Third digit specifies number of zeros. M = ±20% 2R5 = 2.5 003 = 3 004 = 4 006 = 6.3 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 063 = 63 H = Standard solder coated (SnPb 5% Pb minimum) 65 = 4 cycles at 25°C ±5°C 10 = ESR - Standard Blank = 7” Reel 66 = 10 cycles at 25°C ±5°C 20 = ESR - Low 7280 = 13” Reel A = N/A B = 0.1%/1,000 hours C = 0.01%/1,000 hours Packaging (C-Spec) 67 = 10 cycles at -55°C +0°C/-5°C and +85°C ±5°C D= 0.001%/1,000 hours DLA Drawing 04051 04051- 001 A Drawing Number Dash Number Surge Current Option 04051 See Part Number List Blank = 4 cycles +25°C ±5°C before voltage aging A = 10 cycles +25°C ±5°C after voltage aging B = 10 cycles -55°C +0°C/-5°C and +85°C ±5°C after voltage aging T541 T 541 D 157 M 10 A H 65 10 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Failure Rate/ Design Termination Finish Surge Option ESR T= Tantalum 541 = Polymer COTS Multiple Anode D, X, Y First two digits represent significant figures. Third digit specifies number of zeros. M = ±20% 2R5 = 2.5 003 = 3 004 = 4 006 = 6.3 010 = 10 016 = 16 020= 20 025 = 25 035 = 35 050 = 50 063 = 63 H = Standard solder coated (SnPb 5% Pb minimum) 65 = 4 cycles at 25°C ±5°C 10 = ESR - Standard Blank = 7” Reel 66 = 10 cycles at 25°C ±5°C 20 = ESR - Low 7280 = 13” Reel 67 = 10 cycles at -55°C +0°C/-5°C and +85°C ±5°C 30 = ESR - Ultra Low ESR A = N/A B = 0.1%/1,000 hours C = 0.01%/1,000 hours D= 0.001%/1,000 hours Packaging (C-Spec) DLA Drawing 04052 001 A Drawing Number Dash Number Surge Current Option 04052 See Part Number List 04052- Blank = 4 cycles +25°C ±5°C before voltage aging A = 10 cycles +25°C ±5°C after voltage aging B = 10 cycles -55°C +0°C/-5°C and +85°C ±5°C after voltage aging SA1115 Copyright © 2015 KEMET