RoHS SMD SHIELDED POWER CHIP INDUCTOR Dimensions: .118±.008 (3.0±0.2) PCSV35 Inches (mm) XXX .118±0.008 (3.0±0.02) .059 MAX (1.5) .039 TYP (1.0) Allied Part Number PCSV35-1R0M-RC PCSV35-1R5M-RC PCSV35-2R2M-RC PCSV35-3R3M-RC PCSV35-4R7M-RC PCSV35-6R8M-RC PCSV35-100M-RC PCSV35-220M-RC PCSV35-330M-RC PCSV35-820M-RC PCSV35-101M-RC Inductance Tolerance (µh) (%) Test Freq. MHz, 200mV 1.0 1.5 2.2 3.3 4.7 6.8 10 22 33 82 100 20 20 20 20 20 20 20 20 20 20 20 1 1 1 1 1 1 1 1 1 1 1 Features RDC (Ω) ±30% Isat (mA) Typ. Irms (mA) Typ. Marking 0.056 0.074 0.079 0.105 0.130 0.165 0.206 0.501 0.600 1.600 1.800 2000 1600 1200 1000 900 730 600 420 330 210 200 2800 2400 2300 1900 1600 1300 1000 650 600 350 300 1R0 1R5 2R2 3R3 4R7 6R8 100 220 330 820 101 All specifications subject to change without notice. • Magnetically Shielded Construction • Ultra Low Profile Electrical Inductance Range: 1.0µh ~ 100µh (other values being added) Tolerance: Available in 20% Operating Temp: -40ºC ~ +125ºC Isat: Current at which the Inductance will drop by no more then 30% of its initial value. Irms: Based on a temp rise of ∆ T = 40ºC typical. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec Test Equipment (L): HP4287A + HP16197A (RDC): Chroma MilliOhm Meter 16502 Current: HP4284A + HP42841A Physical Packaging: 2K per Tape and reel Marking: As noted 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 03/29/13 www.alliedcomponents.com