THROUGH-HOLE DISPLAY SINGLE DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 0.3 inch (7.62mm), Gray Face, White Segment SA03-11SEKWA SC03-12SEKWA AlGaInP n 601 52000 150000 SX03 SA03-11SURKWA SC03-12SURKWA AlGaInP n 630 31000 SA03-11SYKWA SC03-12SYKWA AlGaInP n 590 52000 100000 SA03-11CGKWA SC03-12CGKWA AlGaInP n 570 21000 67000 57000 0.32 inch (8mm), Gray Face, White Segment SA32-11EWA SC32-11EWA GaAsP/GaP n 617 3600 7600 SX32 SA32-11SRWA SC32-11SRWA SA32-11YWA SC32-11YWA SA32-11GWA SC32-11GWA n 640 14000 31000 GaAsP/GaP n 588 2200 5000 GaP n 568 3600 7100 GaAlAs 0.36 inch (9.14mm), Gray Face, White Segment SA36-11SEKWA SC36-11SEKWA AlGaInP n 601 21000 45000 SX36 SA36-11SURKWA SC36-11SURKWA AlGaInP n 630 14000 28000 SA36-11SYKWA SC36-11SYKWA AlGaInP n 590 21000 45000 SA36-11CGKWA SC36-11CGKWA AlGaInP n 570 11000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 3600 46 THROUGH-HOLE DISPLAY SINGLE DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 0.39 inch (9.9mm), Gray Face, White Segment SA39-11SEKWA SA39-12SEKWA SC39-11SEKWA SC39-12SEKWA AlGaInP n 601 21000 59000 SX39 SA39-11SURKWA SA39-12SURKWA SC39-11SURKWA SC39-12SURKWA AlGaInP n 630 21000 46000 SA39-11SYKWA SA39-12SYKWA SC39-11SYKWA SC39-12SYKWA AlGaInP n 590 31000 86000 SA39-11CGKWA SA39-12CGKWA SC39-11CGKWA SC39-12CGKWA AlGaInP n 570 21000 9000 0.4 inch (10.16mm), Gray Face, White Segment SA04-11SEKWA SA04-12SEKWA SC04-11SEKWA SC04-12SEKWA AlGaInP n 601 52000 160000 SX04 SA04-11SURKWA SA04-12SURKWA SC04-11SURKWA SC04-12SURKWA AlGaInP n 630 31000 SA04-11SYKWA SA04-12SYKWA SC04-11SYKWA SC04-12SYKWA AlGaInP n 590 52000 130000 SA04-11CGKWA SA04-12CGKWA SC04-11CGKWA SC04-12CGKWA AlGaInP n 570 14000 80000 30000 0.43 inch (10.92mm), Gray Face, White Segment SA43-11SEKWA SA43-13SEKWA SC43-11SEKWA SC43-13SEKWA AlGaInP n 601 88000 220000 SX43 SA43-11SURKWA SA43-13SURKWA SC43-11SURKWA SC43-13SURKWA AlGaInP n 630 52000 100000 SA43-11SYKWA SA43-13SYKWA SC43-11SYKWA SC43-13SYKWA AlGaInP n 590 52000 160000 SA43-11CGKWA SA43-13CGKWA SC43-11CGKWA SC43-13CGKWA AlGaInP n 570 14000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 39000 47 THROUGH-HOLE DISPLAY SINGLE DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 0.5 inch (12.7mm), Gray Face, White Segment SA05-11SEKWA SC05-11SEKWA AlGaInP n 601 31000 93000 SX05 SA05-11SURKWA SC05-11SURKWA AlGaInP n 630 31000 SA05-11SYKWA SC05-11SYKWA AlGaInP n 590 52000 120000 SA05-11CGKWA SC05-11CGKWA AlGaInP n 570 14000 69000 34000 0.52 inch (13.2mm), Gray Face, White Segment SA52-11SEKWA SC52-11SEKWA AlGaInP n 601 52000 160000 SX52 SA52-11SURKWA SC52-11SURKWA AlGaInP n 630 52000 110000 SA52-11SYKWA SC52-11SYKWA AlGaInP n 590 52000 140000 SA52-11CGKWA SC52-11CGKWA AlGaInP n 570 14000 46000 0.56 inch (14.2mm), Gray Face, White Segment SA56-11SEKWA SA56-21SEKWA SC56-11SEKWA SC56-21SEKWA AlGaInP n 601 52000 110000 SX56 SA56-11SURKWA SA56-21SURKWA SC56-11SURKWA SC56-21SURKWA AlGaInP n 630 31000 SA56-11SYKWA SA56-21SYKWA SC56-11SYKWA SC56-21SYKWA AlGaInP n 590 52000 160000 SA56-11CGKWA SA56-21CGKWA SC56-11CGKWA SC56-21CGKWA AlGaInP n 570 14000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 97000 35000 48 THROUGH-HOLE DISPLAY SINGLE DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 0.8 inch (20.32mm), Gray Face, White Segment SA08-11SEKWA SA08-12SEKWA SA08-21SEKWA SC08-11SEKWA SC08-12SEKWA SC08-21SEKWA AlGaInP n 601 52000 150000 SX08 SA08-11SURKWA SA08-12SURKWA SA08-21SURKWA SC08-11SURKWA SC08-12SURKWA SC08-21SURKWA AlGaInP n 630 21000 SA08-11SYKWA SA08-12SYKWA SA08-21SYKWA SC08-11SYKWA SC08-12SYKWA SC08-21SYKWA AlGaInP n 590 52000 140000 SA08-11CGKWA SA08-12CGKWA SA08-21CGKWA SC08-11CGKWA SC08-12CGKWA SC08-21CGKWA AlGaInP n 570 14000 61000 25000 1.0 inch (25.4mm), Gray Face, White Segment SA10-11SEKWA SA10-21SEKWA SC10-11SEKWA SC10-21SEKWA AlGaInP n 601 150000 440000 SX10 SA10-11SURKWA SA10-21SURKWA SC10-11SURKWA SC10-21SURKWA AlGaInP n 630 88000 260000 SA10-11SYKWA SA10-21SYKWA SC10-11SYKWA SC10-21SYKWA AlGaInP n 590 150000 400000 SA10-11CGKWA SA10-21CGKWA SC10-11CGKWA SC10-21CGKWA AlGaInP n 570 52000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 95000 49 THROUGH-HOLE DISPLAY SINGLE DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 1.5 inch (38.1mm), Gray Face, White Segment SA15-11SEKWA SC15-11SEKWA AlGaInP n 601 150000 420000 SX15 SA15-11SURKWA SC15-11SURKWA AlGaInP n 630 88000 210000 SA15-11SYKWA SC15-11SYKWA AlGaInP n 590 150000 400000 SA15-11CGKWA SC15-11CGKWA AlGaInP n 570 52000 100000 AlGaInP n 630 88000 210000 AlGaInP n 570 52000 100000 SBA15-11 SURKCGKWA SBC15-11 SURKCGKWA 1.75 inch (44.5mm), Gray Face, White Segment SA18-11SEKWA SC18-11SEKWA AlGaInP n 601 255000 610000 SX18 SA18-11SURKWA SC18-11SURKWA AlGaInP n 630 150000 310000 SA18-11SYKWA SC18-11SYKWA AlGaInP n 590 255000 590000 SA18-11CGKWA SC18-11CGKWA AlGaInP n 570 52000 140000 AlGaInP n 630 150000 310000 AlGaInP n 570 52000 140000 SBA18-11 SURKCGKWA SBC18-11 SURKCGKWA NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 50 THROUGH-HOLE DISPLAY SINGLE DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 2.24 inch (56.9mm), Gray Face, White Segment SA23-11SEKWA SA23-12SEKWA SC23-11SEKWA SC23-12SEKWA AlGaInP n 601 255000 650000 SX23 SA23-11SURKWA SA23-12SURKWA SC23-11SURKWA SC23-12SURKWA AlGaInP n 630 255000 440000 SA23-11SYKWA SA23-12SYKWA SC23-11SYKWA SC23-12SYKWA AlGaInP n 590 255000 720000 SA23-11CGKWA SA23-12CGKWA SC23-11CGKWA SC23-12CGKWA AlGaInP n 570 88000 200000 AlGaInP n 630 255000 440000 AlGaInP n 570 88000 200000 SBA23-11 SURKCGKWA SBC23-11 SURKCGKWA 3.984 inch (101.2mm), Gray Face, White Segment SA40-18SEKWA SA40-19SEKWA SC40-18SEKWA SC40-19SEKWA AlGaInP n 601 255000 500000 SX40 SA40-18SURKWA SA40-19SURKWA SC40-18SURKWA SC40-19SURKWA AlGaInP n 630 88000 250000 SA40-18SYKWA SA40-19SYKWA SC40-18SYKWA SC40-19SYKWA AlGaInP n 590 150000 450000 SA40-18CGKWA SA40-19CGKWA SC40-18CGKWA SC40-19CGKWA AlGaInP n 570 31000 100000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 51 THROUGH-HOLE DISPLAY DUAL DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 0.3 inch (7.62mm), Gray Face, White Segment DA03-11SEKWA DC03-11SEKWA AlGaInP n 601 31000 64000 DX03 DA03-11SURKWA DC03-11SURKWA AlGaInP n 630 21000 47000 DA03-11SYKWA DC03-11SYKWA AlGaInP n 590 21000 54000 DA03-11CGKWA DC03-11CGKWA AlGaInP n 570 16000 9000 0.394 inch (10mm), Gray Face, White Segment DA04-11SEKWA DC04-11SEKWA AlGaInP n 601 31000 100000 DX04 DA04-11SURKWA DC04-11SURKWA AlGaInP n 630 21000 54000 DA04-11SYKWA DC04-11SYKWA AlGaInP n 590 31000 84000 DA04-11CGKWA DC04-11CGKWA AlGaInP n 570 25000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 9000 52 THROUGH-HOLE DISPLAY DUAL DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 0.56 inch (14.22mm), Gray Face, White Segment DA56-11SEKWA DC56-11SEKWA AlGaInP n 601 52000 110000 DX56-11 DA56-11SURKWA DC56-11SURKWA AlGaInP n 630 31000 DA56-11SYKWA DC56-11SYKWA AlGaInP n 590 52000 130000 DA56-11CGKWA DC56-11CGKWA AlGaInP n 570 14000 85000 35000 0.56 inch, (14.22mm), Gray Face, White Segment DA56-51SEKWA DC56-51SEKWA AlGaInP n 601 52000 120000 DX56-51 DA56-51SURKWA DC56-51SURKWA AlGaInP n 630 52000 100000 DA56-51SYKWA DC56-51SYKWA AlGaInP n 590 52000 120000 DA56-51CGKWA DC56-51CGKWA AlGaInP n 570 14000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 23000 53 THROUGH-HOLE DISPLAY DUAL DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 0.8 inch (20.32mm), Gray Face, White Segment DA08-11SEKWA DC08-11SEKWA AlGaInP n 601 52000 120000 DX08 DA08-11SURKWA DC08-11SURKWA AlGaInP n 630 31000 75000 DA08-11SYKWA DC08-11SYKWA AlGaInP n 590 52000 94000 DA08-11CGKWA DC08-11CGKWA AlGaInP n 570 14000 38000 THREE DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 0.4 inch (10.2mm), Gray Face, White Segment BA04-11SEKWA BC04-11SEKWA AlGaInP n 601 52000 160000 BX04 BA04-11SURKWA BC04-11SURKWA AlGaInP n 630 21000 56000 BA04-11SYKWA BC04-11SYKWA AlGaInP n 590 52000 92000 BA04-11CGKWA BC04-11CGKWA AlGaInP n 570 25000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 9000 54 THROUGH-HOLE DISPLAY THREE DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 0.56 inch (14.22mm), Gray Face, White Segment BX56 BA56-11SEKWA BA56-12SEKWA BA56-13SEKWA BC56-11SEKWA BC56-12SEKWA BC56-13SEKWA AlGaInP n 601 52000 120000 BA56-11SURKWA BA56-12SURKWA BA56-13SURKWA BC56-11SURKWA BC56-12SURKWA BC56-13SURKWA AlGaInP n 630 31000 BA56-11SYKWA BA56-12SYKWA BA56-13SYKWA BC56-11SYKWA BC56-12SYKWA BC56-13SYKWA AlGaInP n 590 52000 120000 BA56-11CGKWA BA56-12CGKWA BA56-13CGKWA BC56-11CGKWA BC56-12CGKWA BC56-13CGKWA AlGaInP n 570 14000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 73000 35000 55 THROUGH-HOLE DISPLAY FOUR DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 0.244 inch (6.2mm), Gray Face, White Segment CX25 CA25-11SEKWA CA25-12SEKWA CC25-11SEKWA CC25-12SEKWA AlGaInP n 601 52000 160000 CA25-11SURKWA CA25-12SURKWA CC25-11SURKWA CC25-12SURKWA AlGaInP n 630 31000 CA25-11SYKWA CA25-12SYKWA CC25-11SYKWA CC25-12SYKWA AlGaInP n 590 52000 110000 CA25-11CGKWA CA25-12CGKWA CC25-11CGKWA CC25-12CGKWA AlGaInP n 570 14000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 80000 34000 56 THROUGH-HOLE DISPLAY FOUR DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 0.4 inch (10.16mm), Gray Face, White Segment CX04 CA04-41SEKWA CC04-41SEKWA AlGaInP n 601 52000 140000 CA04-41SURKWA CC04-41SURKWA AlGaInP n 630 31000 CA04-41SYKWA CC04-41SYKWA AlGaInP n 590 52000 110000 CA04-41CGKWA CC04-41CGKWA AlGaInP n 570 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 9000 87000 24000 57 THROUGH-HOLE DISPLAY FOUR DIGIT 7-SEGMENT THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 0.56 inch (14.22mm), Gray Face, White Segment CX56 CA56-11SEKWA CA56-12SEKWA CA56-21SEKWA CC56-11SEKWA CC56-12SEKWA CC56-21SEKWA AlGaInP n 601 52000 120000 CA56-11SURKWA CA56-12SURKWA CA56-21SURKWA CC56-11SURKWA CC56-12SURKWA CC56-21SURKWA AlGaInP n 630 31000 CA56-11SYKWA CA56-12SYKWA CA56-21SYKWA CC56-11SYKWA CC56-12SYKWA CC56-21SYKWA AlGaInP n 590 52000 120000 CA56-11CGKWA CA56-12CGKWA CA56-21CGKWA CC56-11CGKWA CC56-12CGKWA CC56-21CGKWA AlGaInP n 570 14000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 72000 35000 58 THROUGH-HOLE DISPLAY ALPHANUMERIC THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 0.5 inch (12.7mm), Gray Face, White Segment PSA05-11SEKWA PSA05-12SEKWA PSC05-11SEKWA PSC05-12SEKWA AlGaInP n 601 52000 140000 PSX05 PSA05-11SURKWA PSA05-12SURKWA PSC05-11SURKWA PSC05-12SURKWA AlGaInP n 630 52000 110000 PSA05-11SYKWA PSA05-12SYKWA PSC05-11SYKWA PSC05-12SYKWA AlGaInP n 590 52000 160000 PSA05-11CGKWA PSA05-12CGKWA PSC05-11CGKWA PSC05-12CGKWA AlGaInP n 570 14000 32000 0.8 inch (20.32mm), Gray Face, White Segment PSA08-11SEKWA PSA08-12SEKWA PSC08-11SEKWA PSC08-12SEKWA AlGaInP n 601 31000 100000 PSX08 PSA08-11SURKWA PSA08-12SURKWA PSC08-11SURKWA PSC08-12SURKWA AlGaInP n 630 31000 PSA08-11SYKWA PSA08-12SYKWA PSC08-11SYKWA PSC08-12SYKWA AlGaInP n 590 52000 120000 PSA08-11CGKWA PSA08-12CGKWA PSC08-11CGKWA PSC08-12CGKWA AlGaInP n 570 14000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 71000 25000 59 THROUGH-HOLE DISPLAY ALPHANUMERIC THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 1.2 inch (30.48mm), Gray Face, White Segment PSA12-11SEKWA PSC12-11SEKWA AlGaInP n 601 52000 110000 PSX12 PSA12-11SURKWA PSC12-11SURKWA AlGaInP n 630 31000 PSA12-11SYKWA PSC12-11SYKWA AlGaInP n 590 52000 100000 PSA12-11CGKWA PSC12-11CGKWA AlGaInP n 570 14000 63000 25000 2.24 inch (56.8mm), Gray Face, White Segment PSA23-11SEKWA PSC23-11SEKWA AlGaInP n 601 52000 160000 PSX23 PSA23-11SURKWA PSC23-11SURKWA AlGaInP n 630 52000 PSA23-11SYKWA PSC23-11SYKWA AlGaInP n 590 52000 170000 PSA23-11CGKWA PSC23-11CGKWA AlGaInP n 570 14000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 95000 39000 60 THROUGH-HOLE DISPLAY ALPHANUMERIC THROUGH-HOLE DISPLAY Part Number Common Anode Common Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 0.543inch (13.8mm), Gray Face, White Segment PDX54 PDA54-11SEKWA PDA54-12SEKWA PDC54-11SEKWA PDC54-12SEKWA AlGaInP n 601 52000 120000 PDA54-11SURKWA PDA54-12SURKWA PDC54-11SURKWA PDC54-12SURKWA AlGaInP n 630 31000 68000 PDA54-11SYKWA PDA54-12SYKWA PDC54-11SYKWA PDC54-12SYKWA AlGaInP n 590 31000 87000 PDA54-11CGKWA PDA54-12CGKWA PDC54-11CGKWA PDC54-12CGKWA AlGaInP n 570 22000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 9000 61 THROUGH-HOLE DISPLAY DOT MATRIX Part Number Column Anode Column Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 0.3 inch (7.62mm) Dot Matrix TA03-11SRT ∕ GaAlAs n 640 14000 30000 TX03 TA03-11GT ∕ GaP n 568 3600 8300 0.7 inch (18mm), 5x7, Gray Face, White Dot TA07-11SEKWA TC07-11SEKWA AlGaInP n 601 52000 120000 TX07 TA07-11SURKWA TC07-11SURKWA AlGaInP n 630 31000 TA07-11SYKWA TC07-11SYKWA AlGaInP n 590 52000 140000 TA07-11CGKWA TC07-11CGKWA AlGaInP n 570 21000 90000 38000 1.38 inch (35.2mm), 5x8, Gray Face, White Dot TA16-11SEKWA TC16-11SEKWA AlGaInP n 601 88000 200000 TX16 TA16-11SURKWA TC16-11SURKWA AlGaInP n 630 52000 130000 TA16-11SYKWA TC16-11SYKWA AlGaInP n 590 88000 190000 TA16-11CGKWA TC16-11CGKWA AlGaInP n 570 21000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 42000 62 THROUGH-HOLE DISPLAY DOT MATRIX Part Number Column Anode Column Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 1.2 inch (30mm), 5x7, Gray Face, White Dot TA12-11SEKWA TC12-11SEKWA AlGaInP n 601 88000 240000 TX12-11 TA12-11SURKWA TC12-11SURKWA AlGaInP n 630 52000 130000 TA12-11SYKWA TC12-11SYKWA AlGaInP n 590 88000 220000 TA12-11CGKWA TC12-11CGKWA AlGaInP n 570 31000 AlGaInP n 630 52000 130000 AlGaInP n 570 31000 AlGaInP n 630 52000 130000 AlGaInP n 570 31000 TBA12-11 SURKCGKWA TBA12-12 SURKCGKWA 73000 TBC12-11 SURKCGKWA 73000 TBC12-12 SURKCGKWA NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 73000 63 THROUGH-HOLE DISPLAY DOT MATRIX Part Number Column Anode Column Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 1.2 inch (30mm), 5x7, Gray Face, White Dot TA12-22SEKWA TC12-22SEKWA AlGaInP n 601 88000 240000 TX12-22 TA12-22SURKWA TC12-22SURKWA AlGaInP n 630 52000 130000 TA12-22SYKWA TC12-22SYKWA AlGaInP n 590 88000 220000 TA12-22CGKWA TC12-22CGKWA AlGaInP n 570 31000 AlGaInP n 630 52000 130000 AlGaInP n 570 31000 73000 GaAlAs n 640 21000 45000 5600 13000 TBA12-22 SURKCGKWA 73000 TBC12-22 SURKCGKWA TA12-23SRWA TC12-23SRWA TA12-23YWA TC12-23YWA GaAsP/GaP NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. n 588 64 THROUGH-HOLE DISPLAY DOT MATRIX Part Number Column Anode Column Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 1.5 inch (38mm), 8x8, Gray Face, White Dot TA15-11SEKWA TC15-11SEKWA AlGaInP n 601 52000 180000 TA15-11SURKWA TC15-11SURKWA AlGaInP n 630 52000 130000 TA15-11SYKWA TC15-11SYKWA AlGaInP n 590 88000 220000 TA15-11CGKWA TC15-11CGKWA AlGaInP n 570 21000 AlGaInP n 630 52000 130000 AlGaInP n 570 21000 TBA15-11 SURKCGKWA 54000 TBC15-11 SURKCGKWA NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 54000 65 TX15 THROUGH-HOLE DISPLAY DOT MATRIX Part Number Column Anode Column Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 2.0 inch (50mm), 5x7, Gray Face, White Dot TA20-11SEKWA TC20-11SEKWA AlGaInP n 601 88000 180000 TX20 TA20-11SURKWA TC20-11SURKWA AlGaInP n 630 52000 130000 TA20-11SYKWA TC20-11SYKWA AlGaInP n 590 88000 160000 TA20-11CGKWA TC20-11CGKWA AlGaInP n 570 21000 AlGaInP n 630 52000 130000 AlGaInP n 570 21000 AlGaInP n 630 52000 130000 AlGaInP n 570 21000 AlGaInP n 630 52000 130000 AlGaInP n 570 21000 TBA20-11 SURKCGKWA TBA20-12 SURKCGKWA TBA20-22 SURKCGKWA 52000 TBC20-11 SURKCGKWA 52000 TBC20-12 SURKCGKWA 52000 TBC20-22 SURKCGKWA NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 52000 66 THROUGH-HOLE DISPLAY DOT MATRIX Part Number Column Anode Column Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 2.3 inch (58mm), 8x8, Gray Face, White Dot TA23-11SEKWA TC23-11SEKWA AlGaInP n 601 88000 190000 TX23 TA23-11SURKWA TC23-11SURKWA AlGaInP n 630 52000 110000 TA23-11SYKWA TC23-11SYKWA AlGaInP n 590 88000 200000 TA23-11CGKWA TC23-11CGKWA AlGaInP n 570 21000 AlGaInP n 630 52000 110000 AlGaInP n 570 21000 AlGaInP n 630 52000 110000 AlGaInP n 570 21000 TBA23-11 SURKCGKWA TBA23-12 SURKCGKWA 51000 TBC23-11 SURKCGKWA 51000 TBC23-12 SURKCGKWA NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 51000 67 THROUGH-HOLE DISPLAY DOT MATRIX Part Number Column Anode Column Cathode Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 2.4 inch (60.8mm), 5x8, Gray Face, White Dot TA24-11SEKWA TC24-11SEKWA AlGaInP n 601 88000 200000 TX24 TA24-11SURKWA TC24-11SURKWA AlGaInP n 630 52000 150000 TA24-11SYKWA TC24-11SYKWA AlGaInP n 590 88000 230000 TA24-11CGKWA TC24-11CGKWA AlGaInP n 570 21000 AlGaInP n 630 52000 150000 AlGaInP n 570 21000 AlGaInP n 630 52000 150000 AlGaInP n 570 21000 TBA24-11 SURKCGKWA TBA24-22 SURKCGKWA 42000 TBC24-11 SURKCGKWA 42000 TBC24-22 SURKCGKWA NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 42000 68 THROUGH-HOLE DISPLAY DOT MATRIX Part Number Column Anode Column Cathode Material lD (nm) Iv (ucd) @10mA Min. Typ. Dimension 4.0 inch (100mm), 5x7, Gray Face, White Dot TA40-11SEKWA TC40-11SEKWA AlGaInP n 601 255000 590000 TX40 TA40-11SURKWA TC40-11SURKWA AlGaInP n 630 88000 240000 TA40-11SYKWA TC40-11SYKWA AlGaInP n 590 255000 570000 TA40-11CGKWA TC40-11CGKWA AlGaInP n 570 52000 140000 AlGaInP n 630 88000 240000 AlGaInP n 570 52000 140000 AlGaInP n 630 88000 240000 AlGaInP n 570 52000 140000 TBA40-11 SURKCGKWA TBA40-12 SURKCGKWA TBC40-11 SURKCGKWA TBC40-12 SURKCGKWA NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 69 THROUGH-HOLE DISPLAY BAR GRAPH ARRAY Part Number Material lD (nm) Iv (ucd) @10mA Min. Dimension Typ. 5 Segments, Bar graph-Display, Gray Face, White Segment DC-05YWA GaAsP/GaP n 588 2200 9000 DC-05 GaP n 568 5600 12000 DC-10SEKWA AlGaInP n 601 52000 110000 DC-10SURKWA AlGaInP n 630 31000 100000 DC-10SYKWA AlGaInP n 590 52000 110000 DC-10CGKWA AlGaInP n 570 14000 28000 DC-05GWA 10 Segments, Bar graph-Display, Gray Face, White Segment DC-10 20 Segments, Bar graph-Display, Gray Face, White Segment DC-20/20SEKWA AlGaInP n 601 52000 110000 DC-20/20SURKWA AlGaInP n 630 31000 100000 DC-20/20SYKWA AlGaInP n 590 52000 110000 DC-20/20CGKWA AlGaInP n 570 14000 28000 DC-20/20 12 Segments, Bar graph-Display, Black Face, White Segment DD-12SEKWB AlGaInP n 601 88000 180000 DD-12SURKWB AlGaInP n 630 52000 95000 DD-12SYKWB AlGaInP n 590 52000 110000 DD-12CGKWB AlGaInP n 570 21000 35000 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. DD-12 70 THROUGH-HOLE DISPLAY LIGHT BAR Part Number Material lD (nm) Lens Type L-1043SEDTK AlGaInP n 601 L-1043SURDTK AlGaInP n 630 Iv (mcd) @20mA Viewing Angle Min. Typ. 2q1/2 orange diffused 60 120 100° red diffused 30 60 100° Dimension 3.65mm x 6.15mm L-1043 L-1043SYDTK AlGaInP n 590 yellow diffused 80 150 100° L-1043CGDTK AlGaInP n 570 green diffused 8 20 100° L-835/2SEDTK AlGaInP n 601 orange diffused 55 150 120° L-835/2SURDTK AlGaInP n 630 red diffused 20 80 120° 5mm x 10mm L-835/2 L-835/2SYDTK AlGaInP n 590 yellow diffused 55 120 120° L-835/2CGDTK AlGaInP n 570 green diffused 12 30 120° Part Number Material lD (nm) Lens Type DE/2SEKD AlGaInP n 601 DE/2SURKD AlGaInP n 630 Iv (mcd) @20mA Min. Typ. orange diffused 500 1000 red diffused 400 600 Dimension 7.5mm x 14mm DE/2 DE/2SYKD AlGaInP n 590 yellow diffused 700 1100 DE/2CGKD AlGaInP n 570 green diffused 120 200 DF-3SEKD AlGaInP n 601 orange diffused 700 1100 DF-3SURKD AlGaInP n 630 red diffused 400 620 6.8mm x 19.9mm DF-3 DF-3SYKD AlGaInP n 590 yellow diffused 700 1100 DF-3CGKD AlGaInP n 570 green diffused 120 270 DE/4SEKD AlGaInP n 601 orange diffused 1000 1500 DE/4SURKD AlGaInP n 630 red diffused 500 930 15mm x 15mm DE/4 DE/4SYKD AlGaInP n 590 yellow diffused 700 1200 DE/4CGKD AlGaInP n 570 green diffused 120 220 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 71 THROUGH-HOLE DISPLAY LIGHT BAR Part Number Material lD (nm) Lens Type KB-2300SEKW AlGaInP n 601 KB-A100SURKW AlGaInP KB-2400SYKW KB-2500CGKD Iv (mcd) @20mA Min. Typ. white diffused 400 530 n 630 white diffused 120 230 AlGaInP n 590 white diffused 200 370 AlGaInP n 570 green diffused 40 75 Dimension 8.89mm x 3.81mm Size of Light Emitting Areas KB-2300SEKW 19.05mm x 3.81mm Size of Light Emitting Areas KB-2350SEKW AlGaInP n 601 white diffused 400 700 KB-B100SURKW AlGaInP n 630 white diffused 200 370 KB-2450SYKW AlGaInP n 590 white diffused 400 630 KB-2550CGKD AlGaInP n 570 green diffused 55 110 KB-2655SEKW AlGaInP n 601 white diffused 500 910 KB-C100SURKW AlGaInP n 630 white diffused 400 550 KB-2755SYKW AlGaInP n 590 white diffused 500 810 KB-2855CGKD AlGaInP n 570 green diffused 80 140 KB-2600SEKW AlGaInP n 601 white diffused 200 380 KB-D100SURKW AlGaInP n 630 white diffused 120 230 KB-2700SYKW AlGaInP n 590 white diffused 200 370 KB-2800CGKD AlGaInP n 570 green diffused 55 91 KB-2350SEKW 8.89mm x 8.89mm Size of Light Emitting Areas KB-2655SEKW 8.89mm x 3.81mm Size of Light Emitting Areas NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 72 KB-2600SEKW THROUGH-HOLE DISPLAY LIGHT BAR Part Number Material lD (nm) Lens Type Iv (mcd) @20mA Min. Typ. Dimension 8.89mm x 3.81mm Size of Light Emitting Areas KB-2620SEKW AlGaInP n 601 white diffused 200 360 KB-E100SURKW AlGaInP n 630 white diffused 120 240 KB-2720SYKW AlGaInP n 590 white diffused 300 400 KB-2820CGKD AlGaInP n 570 green diffused 20 47 KB-2620SEKW 3.81mm x 19.05mm Size of Light Emitting Areas KB-2635SEKW AlGaInP n 601 white diffused 200 370 KB-F100SURKW AlGaInP n 630 white diffused 120 230 KB-2735SYKW AlGaInP n 590 white diffused 120 250 KB-2835CGKD AlGaInP n 570 green diffused 20 50 KB-2670SEKW AlGaInP n 601 white diffused 300 440 KB-G100SURKW AlGaInP n 630 white diffused 120 210 KB-2770SYKW AlGaInP n 590 white diffused 80 180 KB-2870CGKD AlGaInP n 570 green diffused 20 54 KB-2635SEKW 8.89mm x 8.89mm Size of Light Emitting Areas KB-2670SEKW 8.89mm x 19.05mm Size of Light Emitting Areas KB-2685SEKW AlGaInP n 601 white diffused 200 380 KB-H100SURKW AlGaInP n 630 white diffused 120 230 KB-2785SYKW AlGaInP n 590 white diffused 200 360 KB-2885CGKD AlGaInP n 570 green diffused 40 59 NOTES: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(0.01") unless otherwise noted. 73 KB-2685SEKW