Link opens in new browser window.

RV630
Register Reference Guide
Technical Reference Manual
Rev 1.01o
P/N: 42589_rv630_rrg_1.01o
© 2007 Advanced Micro Devices, Inc.
Trademarks
AMD, the AMD Arrow logo, Athlon, and combinations thereof, ATI, ATI logo, Radeon, and Crossfire are trademarks of Advanced Micro Devices,
Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies.
Disclaimer
The contents of this document are provided in connection with Advanced Micro Devices, Inc. ("AMD") products. AMD makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, arising by estoppel, or otherwise, to any intellectual
property rights are granted by this publication. Except as set forth in AMD's Standard Terms and Conditions of Sale, AMD assumes no liability
whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of
merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
AMD's products are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or
in other applications intended to support or sustain life, or in any other application in which the failure of AMD's product could create a situation
where personal injury, death, or severe property or environmental damage may occur. AMD reserves the right to discontinue or make changes to its
products at any time without notice.
© 2007 Advanced Micro Devices, Inc. All rights reserved.
Table of Contents
Chapter 1: Introduction
1.1 About this Manual .................................................................................................................................................................................1-1
1.2 Nomenclature and Conventions ..........................................................................................................................................................1-1
1.2.1
Numeric Representations .....................................................................................................................................................1-1
1.2.2
Register Description ..............................................................................................................................................................1-1
Chapter 2: Registers Description
2.1
2.2
2.3
2.4
2.5
Memory Controller Registers ..............................................................................................................................................................2-2
Bus Interface Registers .......................................................................................................................................................................2-51
PCI-E Registers ....................................................................................................................................................................................2-54
Clock Generator Registers .................................................................................................................................................................2-89
VIP/I2C Registers ................................................................................................................................................................................2-96
2.5.1
I2C Registers ........................................................................................................................................................................2-96
2.5.2
Video Interface Port Host Port Registers ......................................................................................................................2-109
2.5.3
Capture Registers ...............................................................................................................................................................2-115
2.5.4
VIP Host Port DMA Registers ........................................................................................................................................2-125
2.5.5
General Purpose I/O Data and Control Registers ........................................................................................................2-131
2.5.6
VIP Miscellaneous Registers ...........................................................................................................................................2-132
2.6 Video Graphics Array (VGA) Registers ........................................................................................................................................2-138
2.6.1
VGA Control/Status Registers ........................................................................................................................................2-138
2.6.2
VGA DAC Control Registers ..........................................................................................................................................2-140
2.6.3
VGA Sequencer Registers ...............................................................................................................................................2-141
2.6.4
VGA CRT Registers .........................................................................................................................................................2-142
2.6.5
VGA Graphics Registers ..................................................................................................................................................2-150
2.6.6
VGA Attribute Registers ..................................................................................................................................................2-152
2.6.7
VGA Miscellaneous Registers ........................................................................................................................................2-158
2.7 Display Controller Registers ............................................................................................................................................................2-169
2.7.1
Primary Display Graphics Control Registers................................................................................................................2-169
2.7.2
Primary Display Video Overlay Control Registers .....................................................................................................2-175
2.7.3
Primary Display Video Overlay Transform Registers ...............................................................................................2-180
2.7.4
Primary Display Video Overlay Gamma Correction Registers .................................................................................2-183
2.7.5
Primary Display Graphics and Overlay Blending Registers ......................................................................................2-187
2.7.6
Primary Display Color Matrix Transform Registers ...................................................................................................2-191
2.7.7
Primary Display Subsampling Registers .......................................................................................................................2-194
2.7.8
Primary Display Realtime Overlay Registers ...............................................................................................................2-195
2.7.9
Primary Display Hardware Cursor Registers ................................................................................................................2-196
2.7.10 Primary Display Hardware Icon Registers ....................................................................................................................2-199
2.7.11 Primary Display Multi-VPU Control Registers ...........................................................................................................2-201
2.7.12 Secondary Display Graphics Control Registers ...........................................................................................................2-207
2.7.13 Secondary Display Video Overlay Control Registers .................................................................................................2-214
2.7.14 Secondary Display Video Overlay Transform Registers ............................................................................................2-218
2.7.15 Secondary Display Video Overlay Gamma Correction Registers ............................................................................2-222
2.7.16 Secondary Display Graphics and Overlay Blending Registers .................................................................................2-226
2.7.17 Secondary Display Color Matrix Transform Registers ...............................................................................................2-229
2.7.18 Secondary Display Subsampling Registers ...................................................................................................................2-233
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
TOC-1
2.7.19 Secondary Display Realtime Overlay Registers .........................................................................................................2-233
2.7.20 Secondary Display Hardware Cursor Registers ...........................................................................................................2-235
2.7.21 Secondary Display Hardware Icon Registers ...............................................................................................................2-237
2.7.22 Secondary Display Multi-VPU Control Registers .......................................................................................................2-239
2.7.23 Display Look Up Table Control Registers ....................................................................................................................2-240
2.7.24 Display Controller Look Up Table A Registers ...........................................................................................................2-243
2.7.25 Display Controller Look Up Table B Registers ...........................................................................................................2-246
2.7.26 Display Controller CRC Registers..................................................................................................................................2-249
2.7.27 Display/Memory Interface Control and Status Registers ..........................................................................................2-250
2.7.28 MCIF Control Registers ...................................................................................................................................................2-252
2.7.29 Display Controller to Line Buffer Control Registers .................................................................................................2-253
2.7.30 Multi VPU Control Registers ..........................................................................................................................................2-253
2.8 CRTC Control Registers ..................................................................................................................................................................2-254
2.8.1
Primary Display CRTC Control Registers ....................................................................................................................2-254
2.8.2
Secondary Display CRTC Control Registers ................................................................................................................2-270
2.9 Display Output Registers ..................................................................................................................................................................2-286
2.9.1
Digital to Analog Converter (DAC) Registers .............................................................................................................2-286
2.9.2
Display Output Control Registers ...................................................................................................................................2-320
Appendix A: Cross Referenced Index
A.1 Quick Cross-Reference Index ............................................................................................................................................................ A-1
A.2 Configuration Registers Sorted by Name ........................................................................................................................................ A-2
A.3 Configuration Registers Sorted by Address .................................................................................................................................... A-5
A.4 Clock Generator Registers Sorted by Name ................................................................................................................................... A-8
A.5 Clock Generator Registers Sorted by Address................................................................................................................................ A-9
A.6 Display Contoller Registers Stored by Name ............................................................................................................................... A-10
A.7 Display Controller Registers Stored by Address .......................................................................................................................... A-25
A.8 Host Interface Decode Space Registers Sorted by Name ........................................................................................................... A-40
A.9 Memory Controller Registers Sorted By Name............................................................................................................................ A-41
A.10 Memory Controller Registers Sorted By Address ..................................................................................................................... A-45
A.11 PCI-E Registers Sorted By Name ................................................................................................................................................. A-49
A.12 PCI-E Registers Sorted By Address ............................................................................................................................................. A-51
A.13 VIP Registers Sorted By Name ..................................................................................................................................................... A-53
A.14 VIP Registers Sorted By Address ................................................................................................................................................. A-56
A.15 VGA ATTR Registers Sorted By Name ...................................................................................................................................... A-59
A.16 VGA CRT Registers Sorted By Name......................................................................................................................................... A-60
A.17 VGA GRPH Registers Sorted By Name ..................................................................................................................................... A-61
A.18 VGA SEQ Registers Sorted By Name ......................................................................................................................................... A-62
A.19 All Registers Sorted by Name ....................................................................................................................................................... A-63
Appendix B: Revision History
4 2 5 8 9 R V 6 3 0 R e g is te r R e fe re n c e G u id e (O E M) R e v 1 .0 1
TOC-2
© 2007 Advanced Micro Devices, Inc.
Proprietary
Chapter 1
Introduction
1.1
About this Manual
This manual serves as a register reference guide to the RV630 graphics controller.
•
•
•
Chapter 1 outlines the notations and conventions used throughout this manual.
Chapter 2 provides a detailed description of the registers.
Appendix A provides several cross-referenced lists (sorted by Register Name and Address).
1.2
Nomenclature and Conventions
1.2.1
Numeric Representations
•
•
1.2.2
Hexadecimal numbers are appended with “h” whenever there is a risk of ambiguity. Other numbers are assumed to be
in decimal.
Registers (or fields) of identical function are sometimes indicated by a single expression in which the part of the
signal name that differs is enclosed in [ ] brackets. For example, the eight Host Data registers — HOST_DATA0
through to HOST_DATA7 — are represented by the single expression HOST_DATA[7:0].
Register Description
All registers in this document are described with the format of the sample table below. All offsets are in hexadecimal
notation, while programmed bits are in either binomial or hexadecimal notation.
DST_HEIGHT_WIDTH_8 - W - 32 bits - [MMReg:0x158C]
Field Name
DST_WIDTH
Bits
Default
Description
23:16
0x0
Destination Width Note: This is an initiator register. Y is incremented
at end of blit. Write 15: 0 to E2_DST_X, Write 31: 16 to
E2_DST_WIDTH, then signal blit_start. E2_DST_Y = E2_DEST_Y
(+/-) E2_DST_HEIGHT as function of direction after blit is complete
31:24
0x0
Destination Height Write 15: 0 to E2_DST_Y, Write 31: 16 to
E2_DST_HEIGHT
(mirror bits 0:7 of DST_WIDTH:DST_WIDTH)
DST_HEIGHT
(mirror bits 0:7 of DST_HEIGHT:DST_HEIGHT)
[ W] (Reserved) 15: 0 DST_WIDTH 23: 16 Destination width: range 0 to 256 (ZERO extent)
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
1-1
Nomenclature and Conventions
Table 1-1 Register description table notation
Register Information
Example
Register name
DST_HEIGHT_WIDTH_8
Read / Write capability
R = Readable
W = Writable
RW = Readable and Writable
W
Register size
32 bits
Register address(es)*
MMReg:0x158C
Field name
DST_WIDTH
Field position/size
23:16
Field default value
0x0
Field description
Destination....complete
Field mirror information
(mirror bits 0:7 of DST_WIDTH:DST_WIDTH)
Brief register description
[ W] (Reserved) 15: 0 DST_WIDTH 23: 16 Destination width: range 0 to
256 (ZERO extent)
* Note:
There may be more than one address; the convention used is as follows:
[aperName:offset] - single mapping, to one aperture/decode and one offset
[aperName1, aperName2, …, aperNameN:offset] - multiple mappings to different apertures/decodes but same offset
[aperName:startOffset-endOffset] - mapped to an offset range in the same aperture/decode
42589 RV630 Register Reference Guide (OEM) Rev 1.01
1-2
© 2007 Advanced Micro Devices, Inc.
Proprietary
Chapter 2
Registers Description
To link to a topic of interest, use the following list of hypertext linked cross references:
“Memory Controller Registers” on page 2-2
“Bus Interface Registers” on page 2-51
“PCI-E Registers” on page 2-54
“Clock Generator Registers” on page 2-89
“VIP/I2C Registers” on page 2-96
“Video Graphics Array (VGA) Registers” on page 2-138
“Display Controller Registers” on page 2-169
“CRTC Control Registers ” on page 2-254
“Display Output Registers” on page 2-286
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-1
Memory Controller Registers
2.1
Memory Controller Registers
MC_SEQ_CNTL - RW - 32 bits - [GpuF0MMReg:0x2600]
Field Name
MEM_ADDR_MAP_COLS
Bits
1:0
Default
0x0
MEM_ADDR_MAP_BANK
2
0x0
SAFE_MODE
5:4
0x0
CHANNEL_DISABLE
9:8
0x0
PIPE_DELAY_OUT
12
0x0
PIPE_DELAY_IN
13
0x0
MSKOFF_DAT_TL
16
0x0
MSKOFF_DAT_TH
17
0x0
MSKOFF_DAT_AC
18
0x0
Description
0=2**8 columns
1=2**9 columns
2=2**10 columns
3=reserved
0=4 banks
1=8 banks
0=Disable safe mode
1=Ensure closing all pages before doing refresh
2=Ensure closing page before access a different page in
the same bank
3=Reserved
This field allows the user to
disable the mclk branch for the specific unused channel.
NOT FOR 600
This field specifies pipeline
delay between mc & io. This field is NOT CONFIGURABLE
for a specific ASIC
for 600: 0
for
610: 0
for 630: 1
0=No pipeline delay between MC/IO for outgoing signals
1=pipeline delay
This field specifies pipeline
delay between mc & io. This field is NOT CONFIGURABLE
for a specific ASIC
for 600: 0
for
610: 0
for 630: 1
0=No pipeline delay between MC/IO for incoming signals
1=pipeline delay
for the byte which has data
mask on, tie the corresponding dq to 0 ONLY 1 bit could be
set to 1 among MSKOFF_DAT_TL, MSKOFF_DAT_TH,
MSKOFF_DAT_AC
1=Tie low for the DQ whose corresponding DQM is on
for the byte which has data
mask on, tie the corresponding dq to 1 ONLY 1 bit could be
set to 1 among MSKOFF_DAT_TL, MSKOFF_DAT_TH,
MSKOFF_DAT_AC
1=Tie high for the DQ whose corresponding DQM is on
for the byte which has data
mask on, keep the previous dq value to avoid toggleing
ONLY 1 bit could be set to 1 among MSKOFF_DAT_TL,
MSKOFF_DAT_TH, MSKOFF_DAT_AC
1=no toggling for the DQ whose corresponding DQM is on
This register specifies specific seq configuration
MC_SEQ_DRAM - RW - 32 bits - [GpuF0MMReg:0x2608]
ADR_2CK
Field Name
Bits
0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-2
Description
Number of cycle(s) to send an address. One cycle
for non-DDR4. Two
cycles for DDR4.
0=One-cycle address
1=Two-cycle address
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
ADR_MUX
1
0x1
ADR_DF1
2
0x1
AP8
3
0x0
DAT_DF1
4
0x1
DQS_DF1
5
0x1
DQM_DF1
6
0x1
DQM_ACT
7
0x1
STB_CNT
11:8
0xf
CKE_DYN
12
0x0
CKE_ACT
13
0x1
BO4
14
0x0
DLL_CLR
15
0x0
DLL_CNT
DAT_INV
23:16
24
0xf
0x0
INV_ACM
25
0x1
ODT_ENB
26
0x0
ODT_ACT
27
0x1
RST_CTL
28
0x1
TRI_MIO_DYN
29
0x0
This register specifies the character of the DRAM interface.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Address bus is shared between two channels or not.
Not shared for
DDR4. Shared for non-DDR4.
0=Address bus is not shared
1=Address bus is shared
Default value for address bus (during NOP).
0=Address default low
1=Address default high
Location of auto-precharge bit.
0=AP bit starts at MSB+1
1=AP bit is bit 8
Default value for data bus.
0=DAT default low
1=DAT default high
Default value for write strobes.
0=DQS default low
1=DQS default high
Default value for write mask.
0=DQM default low
1=DQM default high
Polarity of data mask. Active low for DDR4. Active
high for nonDDR4.
0=DQM active low
1=DQM active high
DRAM standby counter. Number of idle cycles
before dynamic CKE is
enabled. This prevents the
CKE from turning off too easily.
Dynamic CKE.
0=Disable
1=Enable
Polarity of clock enable. Active low for DDR4. Active
high for nonDDR4.
0=Active low
1=Active high
DRAM burst size.
0=DRAM is burst of 8
1=DRAM is burst of 4
Resets DLL lock timer. DRAM power up is
completed once the DLL lock
time is reached. If the
DLL lock timer is reset, the DRAM power up
flag is
deasserted.
0=Not reset DLL timer
1=Reset DLL timer
DRAM DLL lock time in multiples of 256 mclk cycles.
Enables/disables DDR write data inversion mode.
0=Disable write data inversion
1=Enable write data inversion
Selects DDR write data inversion mode.
0=DC mode
1=AC mode
0=Disable ODT
1=Enable ODT
0=ODT active low
1=ODT active high
Controls DRAM reset pin. Channel B only.
0=Drive reset low
1=Drive reset high
1=Tristate cmd/data/addr during dynamic cke
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-3
Memory Controller Registers
MC_SEQ_RAS_TIMING_P - RW - 32 bits - [GpuF0MMReg:0x260C]
Bits
4:0
9:5
Default
0xa
0xa
TRCDR
TRCDRA
14:10
19:15
0xd
0xd
TRRD
23:20
0x5
TRC
30:24
0x27
TRCDW
TRCDWA
Field Name
RAS related parameters in hclk cycles for performance mode.
Description
Number of cycles from active to write - 1.
Number of cycles from active to write with
auto-precharge - 1. A
special case for DDR1.
Otherwise the same as TRCDW.
Number of cycles from active to read - 1.
Number of cycles from active to read with
auto-precharge - 1. A
special case for DDR1.
Otherwise the same as TRCDR.
Number of cycles from active bank a to active bank
b - 1.
Number of cycles from active to active/auto refresh
- 1.
MC_SEQ_CAS_TIMING_P - RW - 32 bits - [GpuF0MMReg:0x2610]
Field Name
TNOPW
Bits
1:0
Default
0x0
TNOPR
3:2
0x0
TR2W
8:4
0x9
TR2R
15:12
0x5
TW2R
20:16
0x9
TCL
28:24
0x6
CAS related paramters in hclk cycles for performance mode.
Description
Extra cycle(s) between successive write bursts. For
debugging
purpose only.
Extra cycle(s) between successive read bursts. For
debugging
purpose only.
Read to write turn around time - 1.
Read to read time - 1 (different rank).
Write to read turn around time - 1.
CAS to data return latency - 2 (0 to 20).
MC_SEQ_MISC_TIMING_P - RW - 32 bits - [GpuF0MMReg:0x2614]
TRP_WRA
TCKE_HI
Field Name
Bits
5:0
7:6
Default
0x15
0x0
TRP_RDA
13:8
0x11
TRP
19:16
0xb
TRFC
26:20
0x2f
TCKE
31:28
0x4
Misc. DRAM parameters in hclk cycles for performance mode.
Description
From write with auto-prechrage to active - 1.
2 MSB of
tCKE parameters, used to control exit power down time.
From read with auto-prechrage to active - 1.
Precharge command period - 1.
Auto-refresh command period - 1.
4 LSB CKE power down exit timer.
MC_SEQ_MISC_TIMING2_P - RW - 32 bits - [GpuF0MMReg:0x2618]
PA2RDATA
PA2WDATA
Field Name
Bits
2:0
6:4
Default
0x0
0x0
Description
Preamble for DDR4.
Read
Write
Preamble for DDR4.
FAW
12:8
0x0
Four Active
Window/2 - 5 in MCLK
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-4
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
TCKE_PULSE
19:16
0x0
minimum
power down period/power up period
Misc. DRAM parameters in hclk cycles for performance mode.
MC_SEQ_RAS_TIMING_B - RW - 32 bits - [GpuF0MMReg:0x261C]
Bits
4:0
9:5
Default
0xa
0xa
TRCDR
TRCDRA
14:10
19:15
0xd
0xd
TRRD
23:20
0x5
TRC
30:24
0x27
TRCDW
TRCDWA
Field Name
RAS related parameters in hclk cycles for balanced mode
Description
Number of cycles from active to write - 1.
Number of cycles from active to write with
auto-precharge - 1. A
special case for DDR1.
Otherwise the same as TRCDW.
Number of cycles from active to read - 1.
Number of cycles from active to read with
auto-precharge - 1. A
special case for DDR1.
Otherwise the same as TRCDR.
Number of cycles from active bank a to active bank
b - 1.
Number of cycles from active to active/auto refresh
- 1.
MC_SEQ_CAS_TIMING_B - RW - 32 bits - [GpuF0MMReg:0x2620]
Field Name
TNOPW
Bits
1:0
Default
0x0
TNOPR
3:2
0x0
TR2W
8:4
0x9
TR2R
15:12
0x5
TW2R
20:16
0x9
TCL
28:24
0x6
CAS related paramters in hclk cycles for balanced mode.
Description
Extra cycle(s) between successive write bursts. For
debugging
purpose only.
Extra cycle(s) between successive read bursts. For
debugging
purpose only.
Read to write turn around time - 1.
Read to read time - 1 (different rank).
Write to read turn around time - 1.
CAS to data return latency - 2 (0 to 20).
MC_SEQ_MISC_TIMING_B - RW - 32 bits - [GpuF0MMReg:0x2624]
TRP_WRA
TCKE_HI
Field Name
Bits
5:0
7:6
Default
0x15
0x0
TRP_RDA
13:8
0x11
TRP
19:16
0xb
TRFC
26:20
0x2f
TCKE
31:28
0x4
Misc. DRAM parameters in hclk cycles for balanced mode.
Description
From write with auto-prechrage to active - 1.
2 MSB of
tCKE parameters, used to control exit power down time.
From read with auto-prechrage to active - 1.
Precharge command period - 1.
Auto-refresh command period - 1.
CKE power down exit timer.
MC_SEQ_MISC_TIMING2_B - RW - 32 bits - [GpuF0MMReg:0x2628]
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-5
Memory Controller Registers
Field Name
PA2RDATA
PA2WDATA
Bits
2:0
6:4
FAW
TCKE_PULSE
12:8
19:16
Default
0x0
0x0
0x0
0x0
Misc. DRAM parameters in hclk cycles for balanced mode.
Description
Read
Preamble for DDR4.
Write
Preamble for DDR4.
minimum
power down period/power up period
MC_SEQ_RAS_TIMING_S - RW - 32 bits - [GpuF0MMReg:0x262C]
Bits
4:0
9:5
Default
0xa
0xa
TRCDR
TRCDRA
14:10
19:15
0xd
0xd
TRRD
23:20
0x5
TRC
30:24
0x27
TRCDW
TRCDWA
Field Name
RAS related parameters in hclk cycles for battery mode.
Description
Number of cycles from active to write - 1.
Number of cycles from active to write with
auto-precharge - 1. A
special case for DDR1.
Otherwise the same as TRCDW.
Number of cycles from active to read - 1.
Number of cycles from active to read with
auto-precharge - 1. A
special case for DDR1.
Otherwise the same as TRCDR.
Number of cycles from active bank a to active bank
b - 1.
Number of cycles from active to active/auto refresh
- 1.
MC_SEQ_CAS_TIMING_S - RW - 32 bits - [GpuF0MMReg:0x2630]
TNOPW
Field Name
TNOPR
Bits
1:0
Default
0x0
3:2
0x0
TR2W
8:4
0x9
TR2R
15:12
0x5
TW2R
20:16
0x9
TCL
28:24
0x6
CAS related paramters in hclk cycles for battery mode.
Description
Extra cycle(s) between successive write bursts. For
debugging
purpose only.
Extra cycle(s) between successive read bursts. For
debugging
purpose only.
Read to write turn around time - 1.
Read to read time - 1 (different rank).
Write to read turn around time - 1.
CAS to data return latency - 2 (0 to 20).
MC_SEQ_MISC_TIMING_S - RW - 32 bits - [GpuF0MMReg:0x2634]
TRP_WRA
TCKE_HI
Field Name
Bits
5:0
7:6
Default
0x15
0x0
TRP_RDA
13:8
0x11
TRP
19:16
0xb
TRFC
26:20
0x2f
TCKE
31:28
0x4
Misc. DRAM parameters in hclk cycles for battery mode.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-6
Description
From write with auto-prechrage to active - 1.
2 MSB of
tCKE parameters, used to control exit power down time.
From read with auto-prechrage to active - 1.
Precharge command period - 1.
Auto-refresh command period - 1.
CKE power down exit timer.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
MC_SEQ_MISC_TIMING2_S - RW - 32 bits - [GpuF0MMReg:0x2638]
Field Name
PA2RDATA
PA2WDATA
Bits
2:0
6:4
FAW
TCKE_PULSE
12:8
19:16
Default
0x0
Description
Read
Preamble for DDR4.
0x0
Write
Preamble for DDR4.
0x0
0x0
minimum
power down period/power up period
Misc. DRAM parameters in hclk cycles for battery mode.
MC_SEQ_RAS_TIMING_C - RW - 32 bits - [GpuF0MMReg:0x263C]
Field Name
Description
Number of cycles from active to write - 1.
Number of cycles from active to write with
auto-precharge - 1. A
special case for DDR1.
Otherwise the same as TRCDW.
TRCDR
14:10
0xd
Number of cycles from active to read - 1.
TRCDRA
19:15
0xd
Number of cycles from active to read with
auto-precharge - 1. A
special case for DDR1.
Otherwise the same as TRCDR.
TRRD
23:20
0x5
Number of cycles from active bank a to active bank
b - 1.
TRC
30:24
0x27
Number of cycles from active to active/auto refresh
- 1.
RAS related parameters in hclk cycles for context switch mode for context switch mode.
TRCDW
TRCDWA
Bits
4:0
9:5
Default
0xa
0xa
MC_SEQ_CAS_TIMING_C - RW - 32 bits - [GpuF0MMReg:0x2640]
TNOPW
Field Name
TNOPR
Bits
1:0
Default
0x0
3:2
0x0
TR2W
8:4
0x9
TR2R
15:12
0x5
TW2R
20:16
0x9
TCL
28:24
0x6
CAS related paramters in hclk cycles for context switch mode.
Description
Extra cycle(s) between successive write bursts. For
debugging
purpose only.
Extra cycle(s) between successive read bursts. For
debugging
purpose only.
Read to write turn around time - 1.
Read to read time - 1 (different rank).
Write to read turn around time - 1.
CAS to data return latency - 2 (0 to 20).
MC_SEQ_MISC_TIMING_C - RW - 32 bits - [GpuF0MMReg:0x2644]
Field Name
TRP_WRA
TCKE_HI
Bits
5:0
7:6
Default
0x15
0x0
TRP_RDA
13:8
0x11
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
From write with auto-prechrage to active - 1.
2 MSB of
tCKE parameters, used to control exit power down time.
From read with auto-prechrage to active - 1.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-7
Memory Controller Registers
TRP
19:16
0xb
TRFC
26:20
0x2f
TCKE
31:28
0x4
Misc. DRAM parameters in hclk cycles for context switch mode.
Precharge command period - 1.
Auto-refresh command period - 1.
CKE power down exit timer.
MC_SEQ_MISC_TIMING2_C - RW - 32 bits - [GpuF0MMReg:0x2648]
Field Name
PA2RDATA
PA2WDATA
Bits
2:0
6:4
FAW
TCKE_PULSE
12:8
19:16
Default
0x0
0x0
0x0
0x0
Description
Read
Preamble for DDR4.
Write
Preamble for DDR4.
minimum
power down period/power up period
Misc. DRAM parameters in hclk cycles for context switch mode.
MC_SEQ_CMD - RW - 32 bits - [GpuF0MMReg:0x26C4]
Field Name
ADR
MOP
Bits
15:0
18:16
Default
0x0
0x0
END
20
0x0
CSB
22:21
0x0
CHAN0
24
0x0
CHAN1
25
0x0
Command register for DRAM initialization.
Description
This field is mapped directly to the address bus.
DRAM command.
0=NOP
1=Load mode register
2=Precharge
3=Auto-refresh
4=Self-refresh
If set, the DLL lock timer starts counting. Once it
reaches a predefined value, the DLL is stabilized
and DRAM power up sequence is
completed. See
also DLL_CNT inside MC_SEQ_DRAM.
0=Not last operation
1=Last operation, wait for DLL to stabilize
Allows rank 0 and rank 1 to be selected
independently.
0=Select both ranks
1=Select rank 1
2=Select rank 0
3=Select none
0=Select channel 0
1=Not select channel 0
0=Select channel 1
1=Not select channel 1
MC_PMG_CMD - RW - 32 bits - [GpuF0MMReg:0x26CC]
ADR
Field Name
Bits
15:0
Default
0x0
Description
The value of the mode register for resetting DRAM
DLL.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-8
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
MOP
18:16
0x0
Operation
0=NOP
1=Reset DLL
2=Precharge All
3=Auto-refresh
4=Self-refresh
END
20
0x0
This field is not used.
0=Not last operation
1=Last operation, wait for DLL to stabilize
CSB
22:21
0x0
This field is not used.
0=Select both ranks
1=Select rank 1
2=Select rank 0
3=Select none
Power manager command register. This register specifies the value
used for resetting the DRAM DLL.
MC_PMG_CFG - RW - 32 bits - [GpuF0MMReg:0x26D0]
Field Name
SYC_CLK
Bits
0
Default
0x0
RST_DLL
1
0x0
TRI_MIO
2
0x0
XSR_TMR
7:4
0x0
AUTO_SLF
8
0x0
AUTO_SLF_IDLE_CNT
15:12
0x0
SLF_IDLE_CNT
19:16
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Controls mclk/yclk synchronization after on-chip
DLL is reset.
0=Don't synchronize YCLK/MCLK after DLL is reset
1=Synchronize YCLK/MCLK after DLL is reset
Controls DRAM DLL reset after waking up from
self-refresh.
0=Don't reset DRAM DLL after self-refresh
1=Reset DRAM DLL after self-refresh
Controls memory IO tristate during power down.
0=Don't tri-state DRAM CMD and CLK signals dring
self-refresh
1=tri-state DRAM CMD and CLK signals druing
self-refresh
Multiple of 16 mclk cycles to wait before resetting
DRAM DLL.
Enable
automatic selfrefresh mode
0=Disable
1=Enable
Number of
idle cycles memory stays before put the memory into self
refresh mode
1=256*2
2=256*3
3=256*4
4=256*5
5=256*6
6=256*7
7=256*8
8=256*9
9=256*10
10=256*11
11=256*12
12=256*13
13=256*14
14=256*15
Number of
SEQ idle cycles after SEQ receiving self-refresh command
to the time SEQ issue the self-refresh command - 16
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-9
Memory Controller Registers
WRITE_DURING_DLOCK
20
0x0
EARLY_ACK_DYN
21
0x0
EARLY_ACK_ACPI
22
0x0
UNUSED_SEQ_SHUTDOWN
24
0x1
0=no write during dll lock time
1=allow write transaction during dll lock time
0=ack out-of-slf when DLL is locked
1=ack out-of-slf when tXSNR expires
0=ack out-of-slf when DLL is locked
1=ack out-of-slf when tXSNR expires
0=keep mclk branch running for unused SEQ pair
1=shut off unused SEQ pair
Power manager configuration register.
MC_IMP_CNTL - RW - 32 bits - [GpuF0MMReg:0x26D4]
Field Name
MEM_IO_UPDATE_RATE
Bits
4:0
Default
0x16
MEM_IO_PMCOMP_STRD2
5
0x0
MEM_IO_SAMPLE_DELAY
12:8
0x6
MEM_IO_SAMPLE_CNT
MEM_IO_INC_THRESHOLD
15:13
20:16
0x7
0xe
MEM_IO_DEC_THRESHOLD
28:24
0x6
CAL_WHEN_IDLE
29
0x1
CAL_WHEN_REFRESH
30
0x1
MEM_IMP_EN
31
0x0
Description
Update the impedance value to the PMTEST every
2^MEM_IO_UPDATE_DELAY cycles
0=Disable
1=Enable
Calibration Unit will sample every
2^MEM_IO_SAMPLE_DELAY cycles
Number of samples to be taken before update value to IO
Number of '1' get detected during 15 cycles before increase
impedance value
Number of '0' get detected during 15 cycles before
decrease impedance value
0=Disable
1=Enable
0=Disable
1=Enable
0=Disable
1=Enable
Impedance Calibration Control
MC_IMP_DEBUG - RW - 32 bits - [GpuF0MMReg:0x2878]
Field Name
MEM_IMP_DEBUG_N
MEM_IMP_DEBUG_P
MEM_IO_IMP_DEBUG_EN
MEM_STATUS_SEL
Bits
3:0
7:4
8
Default
0x0
0x0
0x0
12
0x0
Description
0=Disable
1=Enable
0=Vertical
1=Horizontal
MC_IMP_STATUS - RW - 32 bits - [GpuF0MMReg:0x2874]
Field Name
IMP_N_MEM_DQ_SN_I0 (R)
IMP_P_MEM_DQ_SP_I0 (R)
IMP_N_MEM_DQ_SN_I1 (R)
IMP_P_MEM_DQ_SP_I1 (R)
IMP_N_VALUE_R_BACK (R)
IMP_P_VALUE_R_BACK (R)
IMP_CAL_COUNT (R)
Bits
3:0
7:4
11:8
15:12
19:16
23:20
27:24
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-10
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
TEST_OUT_R_BACK (R)
DUMMY_OUT_R_BACK (R)
28
29
0x0
0x0
MC_IO_PAD_CNTL - RW - 32 bits - [GpuF0MMReg:0x2700]
Field Name
VREFI_VCO_EN
IMP_VREF_INTR
IMP_VREF_INTN
IMP_VREF_INTP
Bits
0
1
3:2
5:4
Default
0x0
0x0
0x0
0x0
Description
MC_SEQ_RD_CTL_D0_P - RW - 32 bits - [GpuF0MMReg:0x264C]
Bits
2:0
Default
0x1
RCV_EXT
7:4
0x1
RST_SEL
9:8
0x2
RCV_DLY
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Delay to turn on receive enable.
0=Turn on receive enable at CL-2
1=Turn on receive enable at CL-1
2=Turn on receive enable at CL
3=Turn on receive enable at CL+1
4=Turn on receive enable at CL+2
5=Turn on receive enable at CL+3
6=Turn on receive enable at CL+4
7=Turn on receive enable at CL+5
Extends receive enable signal to cover clock drift.
0=DQS receive enable not extended
1=DQS receive enable extended by 1 cycle
2=DQS receive enable extended by 2 cycles
3=DQS receive enable extended by 3 cycles
4=DQS receive enable extended by 4 cycles
5=DQS receive enable extended by 5 cycles
6=DQS receive enable extended by 6 cycles
7=DQS receive enable extended by 7 cycles
8=DQS receive enable always on
NPL FIFO pointer reset mode.
0=Reset pointers off
1=Reset pointers on
2=Reset pointers before read
3=Reset pointers during refresh
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-11
Memory Controller Registers
RST_HLD
15:12
0x0
STR_PRE
16
0x0
STR_PST
17
0x0
RBS_DLY
24:20
0x0
Channel 0's read command parameters in hclk.
Disables NPL FIFO pointer reset after a read
command for a certain
period of time. This prevents
the pointers (read and write) from
resetting before
the FIFO is read.
0=Disable reset by 11 cycles
1=Disable reset by 12 cycles
2=Disable reset by 13 cycles
3=Disable reset by 14 cycles
4=Disable reset by 15 cycles
5=Disable reset by 16 cycles
6=Disable reset by 17 cycles
7=Disable reset by 18 cycles
8=Disable reset by 19 cycles
9=Disable reset by 20 cycles
10=Disable reset by 21 cycles
11=Disable reset by 22 cycles
12=Disable reset by 23 cycles
13=Disable reset by 24 cycles
14=Disable reset by 25 cycles
Creates an extra strobe in the preamble of a burst.
This is needed
if DQS is default high and its falling
edge is used as a trigger.
0=No read pre strobe
1=Extra read pre strobe
Creates an extra strobe in the postamble of a burst.
This is needed
if DQS is default high and its rising
edge is used as a trigger.
0=No read post strobe
1=Extra read post strobe
Delay to read data out of a NPL FIFO. This is used
to cover the NPL
FIFO's write to read latency.
0=Assert RBS valid at CL+8
1=Assert RBS valid at CL+9
2=Assert RBS valid at CL+10
3=Assert RBS valid at CL+11
4=Assert RBS valid at CL+12
5=Assert RBS valid at CL+13
6=Assert RBS valid at CL+14
7=Assert RBS valid at CL+15
8=Assert RBS valid at CL+16
9=Assert RBS valid at CL+17
10=Assert RBS valid at CL+18
11=Assert RBS valid at CL+19
12=Assert RBS valid at CL+20
13=Assert RBS valid at CL+21
14=Assert RBS valid at CL+22
15=Assert RBS valid at CL+23
16=Assert RBS valid at CL+24
17=Assert RBS valid at CL+25
MC_SEQ_RD_CTL_D1_P - RW - 32 bits - [GpuF0MMReg:0x2650]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-12
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
RCV_DLY
0=Turn on receive enable at CL-2
1=Turn on receive enable at CL-1
2=Turn on receive enable at CL
3=Turn on receive enable at CL+1
4=Turn on receive enable at CL+2
5=Turn on receive enable at CL+3
6=Turn on receive enable at CL+4
7=Turn on receive enable at CL+5
RCV_EXT
7:4
0x1
0=DQS receive enable not extended
1=DQS receive enable extended by 1 cycle
2=DQS receive enable extended by 2 cycles
3=DQS receive enable extended by 3 cycles
4=DQS receive enable extended by 4 cycles
5=DQS receive enable extended by 5 cycles
6=DQS receive enable extended by 6 cycles
7=DQS receive enable extended by 7 cycles
8=DQS receive enable always on
RST_SEL
9:8
0x2
0=Reset pointers off
1=Reset pointers on
2=Reset pointers before read
3=Reset pointers during refresh
RST_HLD
15:12
0x0
0=Disable reset by 11 cycles
1=Disable reset by 12 cycles
2=Disable reset by 13 cycles
3=Disable reset by 14 cycles
4=Disable reset by 15 cycles
5=Disable reset by 16 cycles
6=Disable reset by 17 cycles
7=Disable reset by 18 cycles
8=Disable reset by 19 cycles
9=Disable reset by 20 cycles
10=Disable reset by 21 cycles
11=Disable reset by 22 cycles
12=Disable reset by 23 cycles
13=Disable reset by 24 cycles
14=Disable reset by 25 cycles
STR_PRE
16
0x0
0=No read pre strobe
1=Extra read pre strobe
STR_PST
17
0x0
0=No read post strobe
1=Extra read post strobe
RBS_DLY
24:20
0x0
0=Assert RBS valid at CL+8
1=Assert RBS valid at CL+9
2=Assert RBS valid at CL+10
3=Assert RBS valid at CL+11
4=Assert RBS valid at CL+12
5=Assert RBS valid at CL+13
6=Assert RBS valid at CL+14
7=Assert RBS valid at CL+15
8=Assert RBS valid at CL+16
9=Assert RBS valid at CL+17
10=Assert RBS valid at CL+18
11=Assert RBS valid at CL+19
12=Assert RBS valid at CL+20
13=Assert RBS valid at CL+21
14=Assert RBS valid at CL+22
15=Assert RBS valid at CL+23
16=Assert RBS valid at CL+24
17=Assert RBS valid at CL+25
Channel 1's read command parameters in hclk. See MC_SEQ_RD_CTL_I0.
© 2007 Advanced Micro Devices, Inc.
Proprietary
2:0
0x1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-13
Memory Controller Registers
MC_SEQ_WR_CTL_D0_P - RW - 32 bits - [GpuF0MMReg:0x2654]
Bits
3:0
7:4
8
Default
0x3
0x3
0x0
OEN_DLY
OEN_EXT
15:12
16
0x3
0x1
OEN_SEL
ODT_DLY
21:20
27:24
0x3
0x0
DAT_DLY
DQS_DLY
DQS_XTR
Field Name
ODT_EXT
28
0x0
Channel 0's write command parameters in hclk.
Description
Write command to data output latency.
Write command to DQS latency.
Controls write preamble.
0=No write preamble
1=Write preamble
Write command to output enable latency.
Extends output enable after data burst.
0=output enable not extended
1=output eanble extended by one cycle
Write command to on-die-termination enable
latency.
Extends on-die-termination enable after data burst.
0=ODT not extended
1=ODT extended by one cycle
MC_SEQ_WR_CTL_D1_P - RW - 32 bits - [GpuF0MMReg:0x2658]
Bits
3:0
7:4
8
Default
0x3
0x3
0x0
OEN_DLY
OEN_EXT
15:12
16
0x3
0x1
OEN_SEL
ODT_DLY
ODT_EXT
21:20
27:24
28
0x3
0x0
0x0
DAT_DLY
DQS_DLY
DQS_XTR
Field Name
Description
0=No write preamble
1=Write preamble
0=output enable not extended
1=output eanble extended by one cycle
0=ODT not extended
1=ODT extended by one cycle
Channel 1's write command parameters in hclk. See MC_SEQ_WR_CTL_I1.
MC_SEQ_RD_CTL_D0_B - RW - 32 bits - [GpuF0MMReg:0x2694]
RCV_DLY
Field Name
Bits
2:0
Default
0x1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-14
Description
0=Turn on receive enable at CL-2
1=Turn on receive enable at CL-1
2=Turn on receive enable at CL
3=Turn on receive enable at CL+1
4=Turn on receive enable at CL+2
5=Turn on receive enable at CL+3
6=Turn on receive enable at CL+4
7=Turn on receive enable at CL+5
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
RCV_EXT
7:4
0x1
RST_SEL
9:8
0x2
RST_HLD
15:12
0x0
STR_PRE
16
0x0
STR_PST
17
0x0
RBS_DLY
24:20
0x0
0=DQS receive enable not extended
1=DQS receive enable extended by 1 cycle
2=DQS receive enable extended by 2 cycles
3=DQS receive enable extended by 3 cycles
4=DQS receive enable extended by 4 cycles
5=DQS receive enable extended by 5 cycles
6=DQS receive enable extended by 6 cycles
7=DQS receive enable extended by 7 cycles
8=DQS receive enable always on
0=Reset pointers off
1=Reset pointers on
2=Reset pointers before read
3=Reset pointers during refresh
0=Disable reset by 11 cycles
1=Disable reset by 12 cycles
2=Disable reset by 13 cycles
3=Disable reset by 14 cycles
4=Disable reset by 15 cycles
5=Disable reset by 16 cycles
6=Disable reset by 17 cycles
7=Disable reset by 18 cycles
8=Disable reset by 19 cycles
9=Disable reset by 20 cycles
10=Disable reset by 21 cycles
11=Disable reset by 22 cycles
12=Disable reset by 23 cycles
13=Disable reset by 24 cycles
14=Disable reset by 25 cycles
0=No read pre strobe
1=Extra read pre strobe
0=No read post strobe
1=Extra read post strobe
0=Assert RBS valid at CL+8
1=Assert RBS valid at CL+9
2=Assert RBS valid at CL+10
3=Assert RBS valid at CL+11
4=Assert RBS valid at CL+12
5=Assert RBS valid at CL+13
6=Assert RBS valid at CL+14
7=Assert RBS valid at CL+15
8=Assert RBS valid at CL+16
9=Assert RBS valid at CL+17
10=Assert RBS valid at CL+18
11=Assert RBS valid at CL+19
12=Assert RBS valid at CL+20
13=Assert RBS valid at CL+21
14=Assert RBS valid at CL+22
15=Assert RBS valid at CL+23
16=Assert RBS valid at CL+24
17=Assert RBS valid at CL+25
MC_SEQ_RD_CTL_D1_B - RW - 32 bits - [GpuF0MMReg:0x2698]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-15
Memory Controller Registers
RCV_DLY
2:0
0x1
RCV_EXT
7:4
0x1
RST_SEL
9:8
0x2
RST_HLD
15:12
0x0
STR_PRE
16
0x0
STR_PST
17
0x0
RBS_DLY
24:20
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-16
0=Turn on receive enable at CL-2
1=Turn on receive enable at CL-1
2=Turn on receive enable at CL
3=Turn on receive enable at CL+1
4=Turn on receive enable at CL+2
5=Turn on receive enable at CL+3
6=Turn on receive enable at CL+4
7=Turn on receive enable at CL+5
0=DQS receive enable not extended
1=DQS receive enable extended by 1 cycle
2=DQS receive enable extended by 2 cycles
3=DQS receive enable extended by 3 cycles
4=DQS receive enable extended by 4 cycles
5=DQS receive enable extended by 5 cycles
6=DQS receive enable extended by 6 cycles
7=DQS receive enable extended by 7 cycles
8=DQS receive enable always on
0=Reset pointers off
1=Reset pointers on
2=Reset pointers before read
3=Reset pointers during refresh
0=Disable reset by 11 cycles
1=Disable reset by 12 cycles
2=Disable reset by 13 cycles
3=Disable reset by 14 cycles
4=Disable reset by 15 cycles
5=Disable reset by 16 cycles
6=Disable reset by 17 cycles
7=Disable reset by 18 cycles
8=Disable reset by 19 cycles
9=Disable reset by 20 cycles
10=Disable reset by 21 cycles
11=Disable reset by 22 cycles
12=Disable reset by 23 cycles
13=Disable reset by 24 cycles
14=Disable reset by 25 cycles
0=No read pre strobe
1=Extra read pre strobe
0=No read post strobe
1=Extra read post strobe
0=Assert RBS valid at CL+8
1=Assert RBS valid at CL+9
2=Assert RBS valid at CL+10
3=Assert RBS valid at CL+11
4=Assert RBS valid at CL+12
5=Assert RBS valid at CL+13
6=Assert RBS valid at CL+14
7=Assert RBS valid at CL+15
8=Assert RBS valid at CL+16
9=Assert RBS valid at CL+17
10=Assert RBS valid at CL+18
11=Assert RBS valid at CL+19
12=Assert RBS valid at CL+20
13=Assert RBS valid at CL+21
14=Assert RBS valid at CL+22
15=Assert RBS valid at CL+23
16=Assert RBS valid at CL+24
17=Assert RBS valid at CL+25
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
MC_SEQ_WR_CTL_D0_B - RW - 32 bits - [GpuF0MMReg:0x269C]
Bits
3:0
7:4
8
Default
0x3
0x3
0x0
OEN_DLY
OEN_EXT
15:12
16
0x3
0x1
OEN_SEL
ODT_DLY
ODT_EXT
21:20
27:24
28
0x3
0x0
0x0
DAT_DLY
DQS_DLY
DQS_XTR
Field Name
Description
0=No write preamble
1=Write preamble
0=output enable not extended
1=output eanble extended by one cycle
0=ODT not extended
1=ODT extended by one cycle
MC_SEQ_WR_CTL_D1_B - RW - 32 bits - [GpuF0MMReg:0x26A0]
Bits
3:0
7:4
8
Default
0x3
0x3
0x0
OEN_DLY
OEN_EXT
15:12
16
0x3
0x1
OEN_SEL
ODT_DLY
ODT_EXT
21:20
27:24
28
0x3
0x0
0x0
DAT_DLY
DQS_DLY
DQS_XTR
Field Name
Description
0=No write preamble
1=Write preamble
0=output enable not extended
1=output eanble extended by one cycle
0=ODT not extended
1=ODT extended by one cycle
MC_SEQ_RD_CTL_D0_S - RW - 32 bits - [GpuF0MMReg:0x26A4]
RCV_DLY
Field Name
RCV_EXT
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
2:0
Default
0x1
7:4
0x1
Description
0=Turn on receive enable at CL-2
1=Turn on receive enable at CL-1
2=Turn on receive enable at CL
3=Turn on receive enable at CL+1
4=Turn on receive enable at CL+2
5=Turn on receive enable at CL+3
6=Turn on receive enable at CL+4
7=Turn on receive enable at CL+5
0=DQS receive enable not extended
1=DQS receive enable extended by 1 cycle
2=DQS receive enable extended by 2 cycles
3=DQS receive enable extended by 3 cycles
4=DQS receive enable extended by 4 cycles
5=DQS receive enable extended by 5 cycles
6=DQS receive enable extended by 6 cycles
7=DQS receive enable extended by 7 cycles
8=DQS receive enable always on
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-17
Memory Controller Registers
RST_SEL
9:8
0x2
RST_HLD
15:12
0x0
STR_PRE
16
0x0
STR_PST
17
0x0
RBS_DLY
24:20
0x0
0=Reset pointers off
1=Reset pointers on
2=Reset pointers before read
3=Reset pointers during refresh
0=Disable reset by 11 cycles
1=Disable reset by 12 cycles
2=Disable reset by 13 cycles
3=Disable reset by 14 cycles
4=Disable reset by 15 cycles
5=Disable reset by 16 cycles
6=Disable reset by 17 cycles
7=Disable reset by 18 cycles
8=Disable reset by 19 cycles
9=Disable reset by 20 cycles
10=Disable reset by 21 cycles
11=Disable reset by 22 cycles
12=Disable reset by 23 cycles
13=Disable reset by 24 cycles
14=Disable reset by 25 cycles
0=No read pre strobe
1=Extra read pre strobe
0=No read post strobe
1=Extra read post strobe
0=Assert RBS valid at CL+8
1=Assert RBS valid at CL+9
2=Assert RBS valid at CL+10
3=Assert RBS valid at CL+11
4=Assert RBS valid at CL+12
5=Assert RBS valid at CL+13
6=Assert RBS valid at CL+14
7=Assert RBS valid at CL+15
8=Assert RBS valid at CL+16
9=Assert RBS valid at CL+17
10=Assert RBS valid at CL+18
11=Assert RBS valid at CL+19
12=Assert RBS valid at CL+20
13=Assert RBS valid at CL+21
14=Assert RBS valid at CL+22
15=Assert RBS valid at CL+23
16=Assert RBS valid at CL+24
17=Assert RBS valid at CL+25
MC_SEQ_RD_CTL_D1_S - RW - 32 bits - [GpuF0MMReg:0x26A8]
RCV_DLY
Field Name
Bits
2:0
Default
0x1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-18
Description
0=Turn on receive enable at CL-2
1=Turn on receive enable at CL-1
2=Turn on receive enable at CL
3=Turn on receive enable at CL+1
4=Turn on receive enable at CL+2
5=Turn on receive enable at CL+3
6=Turn on receive enable at CL+4
7=Turn on receive enable at CL+5
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
RCV_EXT
7:4
0x1
RST_SEL
9:8
0x2
RST_HLD
15:12
0x0
STR_PRE
16
0x0
STR_PST
17
0x0
RBS_DLY
24:20
0x0
0=DQS receive enable not extended
1=DQS receive enable extended by 1 cycle
2=DQS receive enable extended by 2 cycles
3=DQS receive enable extended by 3 cycles
4=DQS receive enable extended by 4 cycles
5=DQS receive enable extended by 5 cycles
6=DQS receive enable extended by 6 cycles
7=DQS receive enable extended by 7 cycles
8=DQS receive enable always on
0=Reset pointers off
1=Reset pointers on
2=Reset pointers before read
3=Reset pointers during refresh
0=Disable reset by 11 cycles
1=Disable reset by 12 cycles
2=Disable reset by 13 cycles
3=Disable reset by 14 cycles
4=Disable reset by 15 cycles
5=Disable reset by 16 cycles
6=Disable reset by 17 cycles
7=Disable reset by 18 cycles
8=Disable reset by 19 cycles
9=Disable reset by 20 cycles
10=Disable reset by 21 cycles
11=Disable reset by 22 cycles
12=Disable reset by 23 cycles
13=Disable reset by 24 cycles
14=Disable reset by 25 cycles
0=No read pre strobe
1=Extra read pre strobe
0=No read post strobe
1=Extra read post strobe
0=Assert RBS valid at CL+8
1=Assert RBS valid at CL+9
2=Assert RBS valid at CL+10
3=Assert RBS valid at CL+11
4=Assert RBS valid at CL+12
5=Assert RBS valid at CL+13
6=Assert RBS valid at CL+14
7=Assert RBS valid at CL+15
8=Assert RBS valid at CL+16
9=Assert RBS valid at CL+17
10=Assert RBS valid at CL+18
11=Assert RBS valid at CL+19
12=Assert RBS valid at CL+20
13=Assert RBS valid at CL+21
14=Assert RBS valid at CL+22
15=Assert RBS valid at CL+23
16=Assert RBS valid at CL+24
17=Assert RBS valid at CL+25
MC_SEQ_WR_CTL_D0_S - RW - 32 bits - [GpuF0MMReg:0x26AC]
DAT_DLY
DQS_DLY
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
3:0
7:4
Default
0x3
0x3
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-19
Memory Controller Registers
DQS_XTR
8
0x0
OEN_DLY
OEN_EXT
15:12
16
0x3
0x1
OEN_SEL
ODT_DLY
ODT_EXT
21:20
27:24
28
0x3
0x0
0x0
0=No write preamble
1=Write preamble
0=output enable not extended
1=output eanble extended by one cycle
0=ODT not extended
1=ODT extended by one cycle
MC_SEQ_WR_CTL_D1_S - RW - 32 bits - [GpuF0MMReg:0x26B0]
Field Name
DAT_DLY
DQS_DLY
DQS_XTR
Bits
3:0
7:4
8
Default
0x3
0x3
0x0
OEN_DLY
OEN_EXT
15:12
16
0x3
0x1
OEN_SEL
ODT_DLY
ODT_EXT
21:20
27:24
28
0x3
0x0
0x0
Description
0=No write preamble
1=Write preamble
0=output enable not extended
1=output eanble extended by one cycle
0=ODT not extended
1=ODT extended by one cycle
MC_SEQ_RD_CTL_D0_C - RW - 32 bits - [GpuF0MMReg:0x26B4]
Bits
2:0
Default
0x1
RCV_EXT
7:4
0x1
RST_SEL
9:8
0x2
RCV_DLY
Field Name
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-20
Description
0=Turn on receive enable at CL-2
1=Turn on receive enable at CL-1
2=Turn on receive enable at CL
3=Turn on receive enable at CL+1
4=Turn on receive enable at CL+2
5=Turn on receive enable at CL+3
6=Turn on receive enable at CL+4
7=Turn on receive enable at CL+5
0=DQS receive enable not extended
1=DQS receive enable extended by 1 cycle
2=DQS receive enable extended by 2 cycles
3=DQS receive enable extended by 3 cycles
4=DQS receive enable extended by 4 cycles
5=DQS receive enable extended by 5 cycles
6=DQS receive enable extended by 6 cycles
7=DQS receive enable extended by 7 cycles
8=DQS receive enable always on
0=Reset pointers off
1=Reset pointers on
2=Reset pointers before read
3=Reset pointers during refresh
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
RST_HLD
15:12
0x0
STR_PRE
16
0x0
STR_PST
17
0x0
RBS_DLY
24:20
0x0
0=Disable reset by 11 cycles
1=Disable reset by 12 cycles
2=Disable reset by 13 cycles
3=Disable reset by 14 cycles
4=Disable reset by 15 cycles
5=Disable reset by 16 cycles
6=Disable reset by 17 cycles
7=Disable reset by 18 cycles
8=Disable reset by 19 cycles
9=Disable reset by 20 cycles
10=Disable reset by 21 cycles
11=Disable reset by 22 cycles
12=Disable reset by 23 cycles
13=Disable reset by 24 cycles
14=Disable reset by 25 cycles
0=No read pre strobe
1=Extra read pre strobe
0=No read post strobe
1=Extra read post strobe
0=Assert RBS valid at CL+8
1=Assert RBS valid at CL+9
2=Assert RBS valid at CL+10
3=Assert RBS valid at CL+11
4=Assert RBS valid at CL+12
5=Assert RBS valid at CL+13
6=Assert RBS valid at CL+14
7=Assert RBS valid at CL+15
8=Assert RBS valid at CL+16
9=Assert RBS valid at CL+17
10=Assert RBS valid at CL+18
11=Assert RBS valid at CL+19
12=Assert RBS valid at CL+20
13=Assert RBS valid at CL+21
14=Assert RBS valid at CL+22
15=Assert RBS valid at CL+23
16=Assert RBS valid at CL+24
17=Assert RBS valid at CL+25
MC_SEQ_RD_CTL_D1_C - RW - 32 bits - [GpuF0MMReg:0x26B8]
Field Name
RCV_DLY
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
2:0
Default
0x1
Description
0=Turn on receive enable at CL-2
1=Turn on receive enable at CL-1
2=Turn on receive enable at CL
3=Turn on receive enable at CL+1
4=Turn on receive enable at CL+2
5=Turn on receive enable at CL+3
6=Turn on receive enable at CL+4
7=Turn on receive enable at CL+5
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-21
Memory Controller Registers
RCV_EXT
7:4
0x1
RST_SEL
9:8
0x2
RST_HLD
15:12
0x0
STR_PRE
16
0x0
STR_PST
17
0x0
RBS_DLY
24:20
0x0
0=DQS receive enable not extended
1=DQS receive enable extended by 1 cycle
2=DQS receive enable extended by 2 cycles
3=DQS receive enable extended by 3 cycles
4=DQS receive enable extended by 4 cycles
5=DQS receive enable extended by 5 cycles
6=DQS receive enable extended by 6 cycles
7=DQS receive enable extended by 7 cycles
8=DQS receive enable always on
0=Reset pointers off
1=Reset pointers on
2=Reset pointers before read
3=Reset pointers during refresh
0=Disable reset by 11 cycles
1=Disable reset by 12 cycles
2=Disable reset by 13 cycles
3=Disable reset by 14 cycles
4=Disable reset by 15 cycles
5=Disable reset by 16 cycles
6=Disable reset by 17 cycles
7=Disable reset by 18 cycles
8=Disable reset by 19 cycles
9=Disable reset by 20 cycles
10=Disable reset by 21 cycles
11=Disable reset by 22 cycles
12=Disable reset by 23 cycles
13=Disable reset by 24 cycles
14=Disable reset by 25 cycles
0=No read pre strobe
1=Extra read pre strobe
0=No read post strobe
1=Extra read post strobe
0=Assert RBS valid at CL+8
1=Assert RBS valid at CL+9
2=Assert RBS valid at CL+10
3=Assert RBS valid at CL+11
4=Assert RBS valid at CL+12
5=Assert RBS valid at CL+13
6=Assert RBS valid at CL+14
7=Assert RBS valid at CL+15
8=Assert RBS valid at CL+16
9=Assert RBS valid at CL+17
10=Assert RBS valid at CL+18
11=Assert RBS valid at CL+19
12=Assert RBS valid at CL+20
13=Assert RBS valid at CL+21
14=Assert RBS valid at CL+22
15=Assert RBS valid at CL+23
16=Assert RBS valid at CL+24
17=Assert RBS valid at CL+25
MC_SEQ_WR_CTL_D0_C - RW - 32 bits - [GpuF0MMReg:0x26BC]
DAT_DLY
DQS_DLY
DQS_XTR
Field Name
Bits
3:0
7:4
8
Default
0x3
0x3
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-22
Description
0=No write preamble
1=Write preamble
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
OEN_DLY
OEN_EXT
15:12
16
0x3
0x1
OEN_SEL
ODT_DLY
ODT_EXT
21:20
27:24
28
0x3
0x0
0x0
0=output enable not extended
1=output eanble extended by one cycle
0=ODT not extended
1=ODT extended by one cycle
MC_SEQ_WR_CTL_D1_C - RW - 32 bits - [GpuF0MMReg:0x26C0]
Bits
3:0
7:4
8
Default
0x3
0x3
0x0
OEN_DLY
OEN_EXT
15:12
16
0x3
0x1
OEN_SEL
ODT_DLY
ODT_EXT
21:20
27:24
28
0x3
0x0
0x0
DAT_DLY
DQS_DLY
DQS_XTR
Field Name
Description
0=No write preamble
1=Write preamble
0=output enable not extended
1=output eanble extended by one cycle
0=ODT not extended
1=ODT extended by one cycle
MC_SEQ_IO_CTL_D0 - RW - 32 bits - [GpuF0MMReg:0x265C]
Field Name
ADR_DLY
CMD_DLY
CKN_TRI
Bits
0
1
4
Default
0x0
0x0
0x0
CKP_TRI
5
0x0
MIO_TRI
6
0x0
CKE_BIT
CKE_SEL
7
8
0x0
0x1
STRD2
9
0x0
Channel 0's misc. control parameters.
Description
Delays address output by half a hclk.
Delays command output by half a hclk.
Turns off negative clock manually.
0=Normal
1=Tristate
Turns off positive clock manually.
0=Normal
1=Tristate
Turns off address and command manually.
0=Normal
1=Tristate
Bypass value for clock enable.
Selects clock enable bypass value.
0=Normal CKE
1=Set CKE bit
0=Turn off reserved figures
1=Turn on reserved figures
MC_SEQ_IO_CTL_D1 - RW - 32 bits - [GpuF0MMReg:0x2660]
Field Name
ADR_DLY
CMD_DLY
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
1
Default
0x0
0x0
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-23
Memory Controller Registers
CKN_TRI
4
0x0
CKP_TRI
5
0x0
MIO_TRI
6
0x0
CKE_BIT
CKE_SEL
7
8
0x0
0x1
0=Normal
1=Tristate
0=Normal
1=Tristate
0=Normal
1=Tristate
0=Normal CKE
1=Set CKE bit
STRD2
9
0x0
0=Turn off reserved figures
1=Turn on reserved figures
Channel 1's misc. control parameters. See MC_SEQ_IO_CTL_I0.
MC_SEQ_IO_CTL_UNUSED - RW - 32 bits - [GpuF0MMReg:0x2898]
Field Name
Description
0=Normal
1=Tristate
1
0x1
0=Normal
1=Tristate
2
0x1
0=Normal
1=Tristate
3
0x1
0=Normal
1=Tristate
4
0x0
0=Turn off reserved figures
1=Turn on reserved figures
Unused channel misc. control parameters. This is intended for the second 64-bit IO.
CKN_TRI
CKP_TRI
MIO_TRI
DAT_TRI
STRD2
Bits
0
Default
0x1
MC_SEQ_NPL_CTL_D0 - RW - 32 bits - [GpuF0MMReg:0x2664]
LD_INIT
SYC_SEL
Field Name
SYC_IDLE_CNT
Bits
1:0
5:4
Default
0x0
0x0
31:8
0x0
Description
NPL FIFO's pointer offset.
Selects mclk/yclk synchronization mode.
0=mclk/yclk sync off
1=mclk/yclk sync on
2=mclk/yclk sync during refresh
3=periodically turn on mclk/yclk sync
number of cycles a mclk/yclk sync will be
forced
Channel 0's NPL control parameters.
MC_SEQ_NPL_CTL_D1 - RW - 32 bits - [GpuF0MMReg:0x2668]
LD_INIT
SYC_SEL
Field Name
Bits
1:0
5:4
Default
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-24
Description
Selects mclk/yclk synchronization mode. The value
should be same as MC_SEQ_NPL_CTL_D0 for 32bit mode
0=mclk/yclk sync off
1=mclk/yclk sync on
2=mclk/yclk sync during refresh
3=periodically turn on mclk/yclk sync
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
SYC_IDLE_CNT
31:8
0x0
number of cycles a mclk/yclk sync will be
forced. The value should be same as
MC_SEQ_NPL_CTL_D0 for 32bit mode
Channel 1's NPL control parameters. See MC_SEQ_NPL_CTL_I0.
MC_IO_PAD_CNTL_D0 - RW - 32 bits - [GpuF0MMReg:0x27F0]
Field Name
DELAY_MASTER_SYNC
Bits
1:0
Default
0x0
DIFF_STR
2
0x0
UNI_STR
3
0x0
General Pad control
Description
For 32bit mode, this value should be same as
MC_IO_PAD_CNTL_D1
0=Strobe single ended
1=Strobe differential
0=Bidirectional strobes
1=Unidirectional strobes
MC_IO_PAD_CNTL_D1 - RW - 32 bits - [GpuF0MMReg:0x27F4]
Field Name
DELAY_MASTER_SYNC
DIFF_STR
UNI_STR
Bits
1:0
2
Default
0x0
0x0
3
0x0
Description
0=Strobe single ended
1=Strobe differential
0=Bidirectional strobes
1=Unidirectional strobes
MC_SEQ_CK_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x266C]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_CK_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2670]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
LOAD_STR
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
13
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-25
Memory Controller Registers
PSTR_OFF_V
NSTR_OFF_V
19:16
23:20
0x0
0x0
MC_SEQ_CMD_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2674]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_CMD_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2678]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_DQ_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x267C]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_DQ_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2680]
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
Field Name
Bits
1:0
7:4
11:8
Default
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-26
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
USE_CAL_STR
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
12
0x0
13
19:16
23:20
0x0
0x0
0x0
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_QS_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2684]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_QS_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2688]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_A_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x268C]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_A_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2690]
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-27
Memory Controller Registers
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_IO_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2704]
Field Name
DELAY_DATA_SYNC
Bits
0
Default
0x0
DELAY_STR_SYNC
1
0x0
DELAY_CLK_SYNC
2
0x0
DELAY_CMD_SYNC
3
0x0
DELAY_ADR_SYNC
4
0x0
MEM_FALL_OUT_DATA
5
0x0
MEM_FALL_OUT_STR
6
0x0
MEM_FALL_OUT_CLK
7
0x0
MEM_FALL_OUT_CMD
8
0x0
MEM_FALL_OUT_ADR
9
0x0
FORCE_EN_RD_STR
10
0x0
EN_RD_STR_DLY
11
0x0
DISABLE_CMD
12
0x0
DISABLE_ADR
13
0x0
VREFI_EN
14
0x0
19:15
20
0x0
0x0
21
0x0
23:22
25:24
0x0
0x0
VREFI_SEL
CK_AUTO_EN
CK_DELAY_SEL
CK_DELAY_N
CK_DELAY_P
Description
0=Don't delay data sync
1=delay data sync by 1 yclk
0=Don't delay strobe sync
1=delay strobe sync by 1 yclk
0=Don't delay clk sync
1=delay clk sync by 1 yclk
0=Don't delay cmd sync
1=delay cmd sync by 1 yclk
0=Don't delay adr sync
1=delay adr sync by 1 yclk
0=Data out on YCLK rise
1=Data out on YCLK fall, 1/4 clock delay
0=Strobe out on YCLK rise
1=Strobe out on YCLK fall, 1/4 clock delay
0=Clk out on YCLK rise
1=Clk out on YCLK fall, 1/4 clock delay
0=Command out on YCLK rise
1=Command out on YCLK fall, 1/4 clock delay
0=Address out on YCLK rise
1=Address out on YCLK fall, 1/4 clock delay
0=Read strb enabled by MC
1=Always enable read strb
0=count rising edge
1=count falling edge
0=Drive command
1=Disable command
0=Drive address
1=Disable address
0=VREFI disable
1=VREFI enable
0=No CK duty cycle correction
1=Correct CK duty cycle
0=Use register value
1=Use auto cal value
MC_IO_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2708]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-28
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
DELAY_DATA_SYNC
0
0x0
DELAY_STR_SYNC
1
0x0
DELAY_CLK_SYNC
2
0x0
DELAY_CMD_SYNC
3
0x0
DELAY_ADR_SYNC
4
0x0
MEM_FALL_OUT_DATA
5
0x0
MEM_FALL_OUT_STR
6
0x0
MEM_FALL_OUT_CLK
7
0x0
MEM_FALL_OUT_CMD
8
0x0
MEM_FALL_OUT_ADR
9
0x0
FORCE_EN_RD_STR
10
0x0
EN_RD_STR_DLY
11
0x0
DISABLE_CMD
12
0x0
DISABLE_ADR
13
0x0
VREFI_EN
14
0x0
19:15
20
0x0
0x0
21
0x0
23:22
25:24
0x0
0x0
VREFI_SEL
CK_AUTO_EN
CK_DELAY_SEL
CK_DELAY_N
CK_DELAY_P
0=Don't delay data sync
1=delay data sync by 1 yclk
0=Don't delay strobe sync
1=delay strobe sync by 1 yclk
0=Don't delay clk sync
1=delay clk sync by 1 yclk
0=Don't delay cmd sync
1=delay cmd sync by 1 yclk
0=Don't delay adr sync
1=delay adr sync by 1 yclk
0=Data out on YCLK rise
1=Data out on YCLK fall, 1/4 clock delay
0=Strobe out on YCLK rise
1=Strobe out on YCLK fall, 1/4 clock delay
0=Clk out on YCLK rise
1=Clk out on YCLK fall, 1/4 clock delay
0=Command out on YCLK rise
1=Command out on YCLK fall, 1/4 clock delay
0=Address out on YCLK rise
1=Address out on YCLK fall, 1/4 clock delay
0=Read strb enabled by MC
1=Always enable read strb
0=count rising edge
1=count falling edge
0=Drive command
1=Disable command
0=Drive address
1=Disable address
0=VREFI disable
1=VREFI enable
0=No CK duty cycle correction
1=Correct CK duty cycle
0=Use register value
1=Use auto cal value
MC_IO_RD_DQ_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2710]
MADJ0
MADJ1
MADJ2
MADJ3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_RD_DQ_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2714]
MADJ0
MADJ1
MADJ2
MADJ3
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-29
Memory Controller Registers
MC_IO_RD_QS_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2718]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_RD_QS_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x271C]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_RD_QS2_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2720]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_RD_QS2_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2724]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_WR_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2728]
CK_DLY
CMD_DLY
ADR_DLY
Field Name
Bits
2:0
5:3
8:6
Default
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-30
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
MC_IO_WR_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x272C]
Field Name
CK_DLY
CMD_DLY
ADR_DLY
Bits
2:0
5:3
8:6
Default
0x0
0x0
0x0
Description
MC_IO_CK_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2730]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
VREF_INTR
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
28
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_CK_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2734]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
VREF_INTR
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
28
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_CMD_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2738]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
3:0
7:4
11:8
15:12
17:16
Default
0x0
0x0
0x0
0x0
0x0
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-31
Memory Controller Registers
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
19:18
21:20
22
24:23
25
27:26
0x0
0x0
0x0
0x0
0x0
0x0
MC_IO_CMD_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x273C]
Field Name
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_DQ_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2740]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_DQ_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2744]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-32
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
MC_IO_QS_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2748]
Field Name
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_QS_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x274C]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_A_PAD_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2750]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-33
Memory Controller Registers
MC_IO_A_PAD_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2754]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_WR_DQ_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2758]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
2:0
5:3
8:6
11:9
Default
0x0
0x0
0x0
0x0
Description
MC_IO_WR_DQ_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x275C]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
2:0
5:3
8:6
11:9
Default
0x0
0x0
0x0
0x0
Description
MC_IO_WR_QS_CNTL_D0_I0 - RW - 32 bits - [GpuF0MMReg:0x2760]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
2:0
5:3
8:6
11:9
Default
0x0
0x0
0x0
0x0
Description
MC_IO_WR_QS_CNTL_D0_I1 - RW - 32 bits - [GpuF0MMReg:0x2764]
DLY0
DLY1
DLY2
Field Name
Bits
2:0
5:3
8:6
Default
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-34
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
DLY3
11:9
0x0
MC_IO_RD_STR_NCNTL_B0_D0 - RW - 32 bits - [GpuF0MMReg:0x26E8]
Field Name
Bits
SEL0
2:0
SEL1
5:3
SEL2
8:6
SEL3
11:9
SEL4
14:12
SEL5
17:15
SEL6
20:18
SEL7
23:21
SELM
26:24
Falling Edge Strobe Select For Read Data Byte0
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Bit0 select
Bit1 select
Bit2 select
Bit3 select
Bit4 select
Bit5 select
Bit6 select
Bit7 select
Description
MC_IO_RD_STR_NCNTL_B1_D0 - RW - 32 bits - [GpuF0MMReg:0x280C]
Field Name
Bits
SEL0
2:0
SEL1
5:3
SEL2
8:6
SEL3
11:9
SEL4
14:12
SEL5
17:15
SEL6
20:18
SEL7
23:21
SELM
26:24
Falling Edge Strobe Select For Read Data Byte1
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
Bit0 select
Bit1 select
Bit2 select
Bit3 select
Bit4 select
Bit5 select
Bit6 select
Bit7 select
MC_IO_RD_STR_NCNTL_B2_D0 - RW - 32 bits - [GpuF0MMReg:0x26F8]
Field Name
Bits
SEL0
2:0
SEL1
5:3
SEL2
8:6
SEL3
11:9
SEL4
14:12
SEL5
17:15
SEL6
20:18
SEL7
23:21
SELM
26:24
Falling Edge Strobe Select For Read Data Byte2
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Bit0 select
Bit1 select
Bit2 select
Bit3 select
Bit4 select
Bit5 select
Bit6 select
Bit7 select
Description
MC_IO_RD_STR_NCNTL_B3_D0 - RW - 32 bits - [GpuF0MMReg:0x27F8]
Field Name
SEL0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
2:0
Default
0x0
Description
Bit0 select
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-35
Memory Controller Registers
SEL1
5:3
SEL2
8:6
SEL3
11:9
SEL4
14:12
SEL5
17:15
SEL6
20:18
SEL7
23:21
SELM
26:24
Falling Edge Strobe Select For Read Data Byte3
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Bit1 select
Bit2 select
Bit3 select
Bit4 select
Bit5 select
Bit6 select
Bit7 select
MC_IO_RD_STR_NCNTL_B4_D0 - RW - 32 bits - [GpuF0MMReg:0x2800]
Field Name
Bits
SEL0
2:0
SEL1
5:3
SEL2
8:6
SEL3
11:9
SEL4
14:12
SEL5
17:15
SEL6
20:18
SEL7
23:21
SELM
26:24
Falling Edge Strobe Select For Read Data Byte4
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Bit0 select
Bit1 select
Bit2 select
Bit3 select
Bit4 select
Bit5 select
Bit6 select
Bit7 select
Description
MC_IO_RD_STR_NCNTL_B5_D0 - RW - 32 bits - [GpuF0MMReg:0x2808]
Field Name
Bits
SEL0
2:0
SEL1
5:3
SEL2
8:6
SEL3
11:9
SEL4
14:12
SEL5
17:15
SEL6
20:18
SEL7
23:21
SELM
26:24
Falling Edge Strobe Select For Read Data Byte5
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Bit0 select
Bit1 select
Bit2 select
Bit3 select
Bit4 select
Bit5 select
Bit6 select
Bit7 select
Description
MC_IO_RD_STR_NCNTL_B6_D0 - RW - 32 bits - [GpuF0MMReg:0x2810]
Field Name
Bits
SEL0
2:0
SEL1
5:3
SEL2
8:6
SEL3
11:9
SEL4
14:12
SEL5
17:15
SEL6
20:18
SEL7
23:21
SELM
26:24
Falling Edge Strobe Select For Read Data Byte6
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-36
Bit0 select
Bit1 select
Bit2 select
Bit3 select
Bit4 select
Bit5 select
Bit6 select
Bit7 select
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
MC_IO_RD_STR_NCNTL_B7_D0 - RW - 32 bits - [GpuF0MMReg:0x2818]
Field Name
Bits
SEL0
2:0
SEL1
5:3
SEL2
8:6
SEL3
11:9
SEL4
14:12
SEL5
17:15
SEL6
20:18
SEL7
23:21
SELM
26:24
Falling Edge Strobe Select For Read Data Byte7
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Bit0 select
Bit1 select
Bit2 select
Bit3 select
Bit4 select
Bit5 select
Bit6 select
Bit7 select
Description
MC_SEQ_CK_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x2768]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_CK_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x276C]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_CMD_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x2770]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
0=Ignore cal ctl str
1=Use cal ctl str
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-37
Memory Controller Registers
MC_SEQ_CMD_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x2774]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_DQ_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x2778]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_DQ_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x277C]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_QS_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x2780]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-38
Description
0=Ignore cal ctl str
1=Use cal ctl str
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
MC_SEQ_QS_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x2784]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_A_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x2788]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_SEQ_A_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x278C]
Field Name
NMOS_PD
PSTR_OFF_H
NSTR_OFF_H
USE_CAL_STR
Bits
1:0
7:4
11:8
12
Default
0x0
0x0
0x0
0x0
LOAD_STR
PSTR_OFF_V
NSTR_OFF_V
13
19:16
23:20
0x0
0x0
0x0
Description
0=Ignore cal ctl str
1=Use cal ctl str
MC_IO_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x2790]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-39
Memory Controller Registers
DELAY_DATA_SYNC
0
0x0
DELAY_STR_SYNC
1
0x0
DELAY_CLK_SYNC
2
0x0
DELAY_CMD_SYNC
3
0x0
DELAY_ADR_SYNC
4
0x0
MEM_FALL_OUT_DATA
5
0x0
MEM_FALL_OUT_STR
6
0x0
MEM_FALL_OUT_CLK
7
0x0
MEM_FALL_OUT_CMD
8
0x0
MEM_FALL_OUT_ADR
9
0x0
FORCE_EN_RD_STR
10
0x0
EN_RD_STR_DLY
11
0x0
DISABLE_CMD
12
0x0
DISABLE_ADR
13
0x0
VREFI_EN
14
0x0
19:15
20
0x0
0x0
21
0x0
23:22
25:24
0x0
0x0
VREFI_SEL
CK_AUTO_EN
CK_DELAY_SEL
CK_DELAY_N
CK_DELAY_P
0=Don't delay data sync
1=delay data sync by 1 yclk
0=Don't delay strobe sync
1=delay strobe sync by 1 yclk
0=Don't delay clk sync
1=delay clk sync by 1 yclk
0=Don't delay cmd sync
1=delay cmd sync by 1 yclk
0=Don't delay adr sync
1=delay adr sync by 1 yclk
0=Data out on YCLK rise
1=Data out on YCLK fall, 1/4 clock delay
0=Strobe out on YCLK rise
1=Strobe out on YCLK fall, 1/4 clock delay
0=Clk out on YCLK rise
1=Clk out on YCLK fall, 1/4 clock delay
0=Command out on YCLK rise
1=Command out on YCLK fall, 1/4 clock delay
0=Address out on YCLK rise
1=Address out on YCLK fall, 1/4 clock delay
0=Read strb enabled by MC
1=Always enable read strb
0=count rising edge
1=count falling edge
0=Drive command
1=Disable command
0=Drive address
1=Disable address
0=VREFI disable
1=VREFI enable
0=No CK duty cycle correction
1=Correct CK duty cycle
0=Use register value
1=Use auto cal value
MC_IO_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x2794]
Field Name
DELAY_DATA_SYNC
Bits
0
Default
0x0
DELAY_STR_SYNC
1
0x0
DELAY_CLK_SYNC
2
0x0
DELAY_CMD_SYNC
3
0x0
DELAY_ADR_SYNC
4
0x0
MEM_FALL_OUT_DATA
5
0x0
MEM_FALL_OUT_STR
6
0x0
MEM_FALL_OUT_CLK
7
0x0
MEM_FALL_OUT_CMD
8
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-40
Description
0=Don't delay data sync
1=delay data sync by 1 yclk
0=Don't delay strobe sync
1=delay strobe sync by 1 yclk
0=Don't delay clk sync
1=delay clk sync by 1 yclk
0=Don't delay cmd sync
1=delay cmd sync by 1 yclk
0=Don't delay adr sync
1=delay adr sync by 1 yclk
0=Data out on YCLK rise
1=Data out on YCLK fall, 1/4 clock delay
0=Strobe out on YCLK rise
1=Strobe out on YCLK fall, 1/4 clock delay
0=Clk out on YCLK rise
1=Clk out on YCLK fall, 1/4 clock delay
0=Command out on YCLK rise
1=Command out on YCLK fall, 1/4 clock delay
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
MEM_FALL_OUT_ADR
9
0x0
FORCE_EN_RD_STR
10
0x0
EN_RD_STR_DLY
11
0x0
DISABLE_CMD
12
0x0
DISABLE_ADR
13
0x0
VREFI_EN
14
0x0
19:15
20
0x0
0x0
21
0x0
23:22
25:24
0x0
0x0
VREFI_SEL
CK_AUTO_EN
CK_DELAY_SEL
CK_DELAY_N
CK_DELAY_P
0=Address out on YCLK rise
1=Address out on YCLK fall, 1/4 clock delay
0=Read strb enabled by MC
1=Always enable read strb
0=count rising edge
1=count falling edge
0=Drive command
1=Disable command
0=Drive address
1=Disable address
0=VREFI disable
1=VREFI enable
0=No CK duty cycle correction
1=Correct CK duty cycle
0=Use register value
1=Use auto cal value
MC_IO_RD_DQ_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x2798]
MADJ0
MADJ1
MADJ2
MADJ3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_RD_DQ_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x279C]
MADJ0
MADJ1
MADJ2
MADJ3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_RD_QS_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27A0]
DLY0
DLY1
DLY2
DLY3
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-41
Memory Controller Registers
MC_IO_RD_QS_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27A4]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_RD_QS2_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27A8]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_RD_QS2_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27AC]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
7:0
15:8
23:16
31:24
Default
0x0
0x0
0x0
0x0
Description
MC_IO_WR_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27B0]
CK_DLY
CMD_DLY
ADR_DLY
Field Name
Bits
2:0
5:3
8:6
Default
0x0
0x0
0x0
Description
MC_IO_WR_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27B4]
Field Name
CK_DLY
CMD_DLY
ADR_DLY
Bits
2:0
5:3
8:6
Default
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-42
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
MC_IO_CK_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27B8]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
VREF_INTR
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
28
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_CK_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27BC]
Field Name
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
VREF_INTR
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
28
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_CMD_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27C0]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_CMD_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27C4]
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-43
Memory Controller Registers
Field Name
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_DQ_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27C8]
Field Name
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_DQ_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27CC]
Field Name
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_QS_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27D0]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
Default
0x0
0x0
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-44
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
19:18
21:20
22
24:23
25
27:26
0x0
0x0
0x0
0x0
0x0
0x0
MC_IO_QS_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27D4]
Field Name
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_A_PAD_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27D8]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
VREF_INT
Field Name
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
27:26
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_A_PAD_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27DC]
PTERM
NTERM
PDRV
NDRV
RECV_DUTY
DRV_DUTY
PREAMP
SELFTIME
SLEW
VMODE
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
22
24:23
25
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-45
Memory Controller Registers
VREF_INT
27:26
0x0
MC_IO_WR_DQ_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27E0]
Field Name
DLY0
DLY1
DLY2
DLY3
Bits
2:0
5:3
8:6
11:9
Default
0x0
0x0
0x0
0x0
Description
MC_IO_WR_DQ_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27E4]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
2:0
5:3
8:6
11:9
Default
0x0
0x0
0x0
0x0
Description
MC_IO_WR_QS_CNTL_D1_I0 - RW - 32 bits - [GpuF0MMReg:0x27E8]
Field Name
DLY0
DLY1
DLY2
DLY3
Bits
2:0
5:3
8:6
11:9
Default
0x0
0x0
0x0
0x0
Description
MC_IO_WR_QS_CNTL_D1_I1 - RW - 32 bits - [GpuF0MMReg:0x27EC]
DLY0
DLY1
DLY2
DLY3
Field Name
Bits
2:0
5:3
8:6
11:9
Default
0x0
0x0
0x0
0x0
Description
MC_IO_RD_STR_NCNTL_B0_D1 - RW - 32 bits - [GpuF0MMReg:0x2820]
Field Name
SEL0
SEL1
SEL2
SEL3
SEL4
SEL5
SEL6
SEL7
SELM
Bits
2:0
5:3
8:6
11:9
14:12
17:15
20:18
23:21
26:24
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_RD_STR_NCNTL_B1_D1 - RW - 32 bits - [GpuF0MMReg:0x2828]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-46
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
SEL0
SEL1
SEL2
SEL3
SEL4
SEL5
SEL6
SEL7
SELM
2:0
5:3
8:6
11:9
14:12
17:15
20:18
23:21
26:24
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
MC_IO_RD_STR_NCNTL_B2_D1 - RW - 32 bits - [GpuF0MMReg:0x2830]
SEL0
SEL1
SEL2
SEL3
SEL4
SEL5
SEL6
SEL7
SELM
Field Name
Bits
2:0
5:3
8:6
11:9
14:12
17:15
20:18
23:21
26:24
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_RD_STR_NCNTL_B3_D1 - RW - 32 bits - [GpuF0MMReg:0x2838]
SEL0
SEL1
SEL2
SEL3
SEL4
SEL5
SEL6
SEL7
SELM
Field Name
Bits
2:0
5:3
8:6
11:9
14:12
17:15
20:18
23:21
26:24
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_RD_STR_NCNTL_B4_D1 - RW - 32 bits - [GpuF0MMReg:0x2840]
SEL0
SEL1
SEL2
SEL3
SEL4
SEL5
SEL6
SEL7
SELM
Field Name
Bits
2:0
5:3
8:6
11:9
14:12
17:15
20:18
23:21
26:24
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_RD_STR_NCNTL_B5_D1 - RW - 32 bits - [GpuF0MMReg:0x2848]
SEL0
SEL1
SEL2
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
2:0
5:3
8:6
Default
0x0
0x0
0x0
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-47
Memory Controller Registers
SEL3
SEL4
SEL5
SEL6
SEL7
SELM
11:9
14:12
17:15
20:18
23:21
26:24
0x0
0x0
0x0
0x0
0x0
0x0
MC_IO_RD_STR_NCNTL_B6_D1 - RW - 32 bits - [GpuF0MMReg:0x2850]
SEL0
SEL1
SEL2
SEL3
SEL4
SEL5
SEL6
SEL7
SELM
Field Name
Bits
2:0
5:3
8:6
11:9
14:12
17:15
20:18
23:21
26:24
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_IO_RD_STR_NCNTL_B7_D1 - RW - 32 bits - [GpuF0MMReg:0x2858]
SEL0
SEL1
SEL2
SEL3
SEL4
SEL5
SEL6
SEL7
SELM
Field Name
Bits
2:0
5:3
8:6
11:9
14:12
17:15
20:18
23:21
26:24
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
MC_SEQ_GENERAL_CONFIG - RW - 32 bits - [GpuF0MMReg:0x26D8]
Bits
0
Default
0x1
DUAL_IO
1
0x0
MODE_16BIT
General SEQ configuration
4
0x0
MODE_32BIT
Field Name
Description
0=64-bit channel mode
1=32-bit channel mode
0=Single IO configuration
1=Dual IO configuration
1=16-bit channel mode
MC_SEQ_RS_CNTL - RW - 32 bits - [GpuF0MMReg:0x26DC]
Field Name
RRDREQ_LCL_CREDIT
XBF_HWM
Bits
3:0
9:4
Default
0x4
0x12
DAT_INV
12
0x0
MSK_DFI
13
0x1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-48
Description
High water mark for mclk to sclk async FIFO, for 64bit BO4,
the water mark should be increased
0=Disable read data inversion
1=Enable read data inversion
0=Inverse mask active low
1=Inverse mask active high
© 2007 Advanced Micro Devices, Inc.
Proprietary
Memory Controller Registers
RRDREQ_RETURN_PEND
RRDREQ_RS_CREDIT
17:16
23:20
SEQ to RS control register
Field Name
PWRUP_COMPL_D0 (R)
0x0
0=Return the read data to RS whenever the data is ready
1=Return the read data to RS after all the data for that
burst has been received
2=Return the read data to RS when the data is ready and
the last read for that burst has been sent out to the memory
3=Reserved
0x8
MC_SEQ_STATUS_M - RW - 32 bits - [GpuF0MMReg:0x26C8]
Bits
0
Default
0x0
PWRUP_COMPL_D1 (R)
1
0x0
CMD_RDY_D0 (R)
2
0x0
CMD_RDY_D1 (R)
3
0x0
SLF_D0 (R)
4
0x0
SLF_D1 (R)
5
0x0
SEQ00_ARB_CMD_FIFO_EMPTY (R)
8
0x0
SEQ01_ARB_CMD_FIFO_EMPTY (R)
9
0x0
SEQ10_ARB_CMD_FIFO_EMPTY (R)
10
0x0
SEQ11_ARB_CMD_FIFO_EMPTY (R)
11
0x0
SEQ00_RS_DATA_FIFO_FULL (R)
12
0x0
SEQ01_RS_DATA_FIFO_FULL (R)
13
0x0
SEQ10_RS_DATA_FIFO_FULL (R)
14
0x0
SEQ11_RS_DATA_FIFO_FULL (R)
15
0x0
Description
0=CHAN_D0 SDRAM init in progress
1=CHAN_D0 SDRAM ready
0=CHAN_D1 SDRAM init in progress
1=CHAN_D1 SDRAM ready
0=CHAN_D0 Command register busy
1=CHAN_D0 Command register ready
0=CHAN_D1 Command register busy
1=CHAN_D1 Command register ready
0=CHAN_D0 Not in Self Refresh mode
1=CHAN_D0 In Self Refresh mode
0=CHAN_D1 Not in Self Refresh mode
1=CHAN_D1 In Self Refresh mode
0=SEQ00 arb interface cmd fifo not empty
1=SEQ00 arb interface cmd fifo empty
0=SEQ01 arb interface cmd fifo not empty
1=SEQ01 arb interface cmd fifo empty
0=SEQ10 arb interface cmd fifo not empty
1=SEQ10 arb interface cmd fifo empty
0=SEQ11 arb interface cmd fifo not empty
1=SEQ11 arb interface cmd fifo empty
0=SEQ00 rs interface data fifo not full
1=SEQ00 rs interface data fifo full
0=SEQ01 rs interface data fifo not full
1=SEQ01 rs interface data fifo full
0=SEQ10 rs interface data fifo not full
1=SEQ10 rs interface data fifo full
0=SEQ11 rs interface data fifo not full
1=SEQ11 rs interface data fifo full
MC_SEQ_STATUS_S - RW - 32 bits - [GpuF0MMReg:0x288C]
Field Name
SEQ00_ARB_DATA_FIFO_FULL (R)
Bits
0
Default
0x0
SEQ01_ARB_DATA_FIFO_FULL (R)
1
0x0
SEQ10_ARB_DATA_FIFO_FULL (R)
2
0x0
SEQ11_ARB_DATA_FIFO_FULL (R)
3
0x0
SEQ00_ARB_CMD_FIFO_FULL (R)
4
0x0
SEQ01_ARB_CMD_FIFO_FULL (R)
5
0x0
SEQ10_ARB_CMD_FIFO_FULL (R)
6
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
0=SEQ00 arb interface data fifo not full
1=SEQ00 arb interface data fifo full
0=SEQ01 arb interface data fifo not full
1=SEQ01 arb interface data fifo full
0=SEQ10 arb interface data fifo not full
1=SEQ10 arb interface data fifo full
0=SEQ11 arb interface data fifo not full
1=SEQ11 arb interface data fifo full
0=SEQ00 arb interface cmd fifo not full
1=SEQ00 arb interface cmd fifo full
0=SEQ01 arb interface cmd fifo not full
1=SEQ01 arb interface cmd fifo full
0=SEQ10 arb interface cmd fifo not full
1=SEQ10 arb interface cmd fifo full
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-49
Memory Controller Registers
SEQ11_ARB_CMD_FIFO_FULL (R)
7
0x0
SEQ00_RS_DATA_FIFO_EMPTY (R)
8
0x0
SEQ01_RS_DATA_FIFO_EMPTY (R)
9
0x0
SEQ10_RS_DATA_FIFO_EMPTY (R)
10
0x0
SEQ11_RS_DATA_FIFO_EMPTY (R)
11
0x0
Field Name
D0_I0_PDELAY (R)
D0_I0_NDELAY (R)
D0_I0_PEARLY (R)
D0_I0_NEARLY (R)
D0_I1_PDELAY (R)
D0_I1_NDELAY (R)
D0_I1_PEARLY (R)
D0_I1_NEARLY (R)
D1_I0_PDELAY (R)
D1_I0_NDELAY (R)
D1_I0_PEARLY (R)
D1_I0_NEARLY (R)
D1_I1_PDELAY (R)
D1_I1_NDELAY (R)
D1_I1_PEARLY (R)
D1_I1_NEARLY (R)
0=SEQ11 arb interface cmd fifo not full
1=SEQ11 arb interface cmd fifo full
0=SEQ00 rs interface data fifo not EMPTY
1=SEQ00 rs interface data fifo EMPTY
0=SEQ01 rs interface data fifo not EMPTY
1=SEQ01 rs interface data fifo EMPTY
0=SEQ10 rs interface data fifo not EMPTY
1=SEQ10 rs interface data fifo EMPTY
0=SEQ11 rs interface data fifo not EMPTY
1=SEQ11 rs interface data fifo EMPTY
MC_NPL_STATUS - RW - 32 bits - [GpuF0MMReg:0x2888]
Bits
1:0
3:2
4
5
7:6
9:8
10
11
13:12
15:14
16
17
19:18
21:20
22
23
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-50
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bus Interface Registers
2.2
Bus Interface Registers
MM_INDEX - RW - 32 bits - [GpuF0MMReg,GpuIOReg:0x0]
MM_OFFSET
Field Name
Bits
30:0
Default
0x0
Description
This field specifies the offset (in MM space) of the register
or the offset
in FB memory to be accessed.
All accesses must be dword aligned, therefore,
bits 1:0 are tied to zero.
NOTE: Bits 0:1 of this field are hardwired to ZERO.
This bit specifies whether the address offset is for Register
aperture
or FB aperture (Linear Aperture).
0=Register Aperture
1=Linear Aperture 0
General Memory Access.
The MM_INDEX and MM_DATA pair of registers are used to indirectly accessed
all other memory mapped registers in the lower 64KB space and the Frame buffer.
MM_APER
31
0x0
MM_DATA - RW - 32 bits - [GpuF0MMReg,GpuIOReg:0x4]
Description
This field contains the data to be written to or the data read
from the
address specified in MM_INDEX.
General Memory Access.
The MM_INDEX and MM_DATA pair of registers are used to indirectly access
all other BIF memory mapped registers and the frame buffer.
MM_DATA
Field Name
Bits
31:0
Default
0x0
BUS_CNTL - RW - 32 bits - [GpuF0MMReg:0x5420]
Field Name
BIOS_ROM_WRT_EN
Bits
0
Default
0x0
BIOS_ROM_DIS
1
0x0
PMI_IO_DIS
2
0x0
PMI_MEM_DIS
3
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Unused
0=Disable
1=Enable
Unused
0=Enable
1=Disable
The PMI_STATUS_CNTL.POWER_STATE is used to
program the power state. If the
power
state is D1-D3, then IO access is disabled. If this bit is set
to 1,
it will enable IO access.
0=Normal
1=Disable
The PMI_STATUS_CNTL.POWER_STATE is used to
program the power state. If the
power
state is D1-D3, then MEM access is disabled. If this bit is
set to 1,
it will enable MEM access.
0=Normal
1=Disable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-51
Bus Interface Registers
PMI_BM_DIS
4
0x0
PMI_INT_DIS
5
0x0
VGA_REG_COHERENCY_DIS
6
0x0
VGA_MEM_COHERENCY_DIS
7
0x0
BIF_ERR_RTR_BKPRESSURE_EN
8
0x0
VGA_COHE_SPEC_TIMER_DIS
9
0x0
ALLOW_TC_TO_PCIE
10
0x0
PCI Express Bus Control Register
The PMI_STATUS_CNTL.POWER_STATE is used to
program the power state. If the
power
state is D1-D3, then bus mastering is disabled. If this bit is
set to 1,
it will enable bus mastering.
0=Normal
1=Disable
The PMI_STATUS_CNTL.POWER_STATE is used to
program the power state. If the
power
state is D1-D3, then INTx messages are disabled. If this bit
is set to 1,
it will enable sending INTx
messages.
0=Normal
1=Disable
Disable VGA register coherency.
0=Enable
1=Disable
Disable VGA memory coherency.
0=Enable
1=Disable
Enable Wrapper backpressure RTR to Gijoe3 when a
previous error is pending. When
Gijoe3
signals error is done, Wrapper will assert RTR to accept the
next request
0=Disable
1=Enable
0=Enable
1=Disable
Allow the traffic class bit from clients to propagate to PCIE
core. If not, it will be tied to 0
0=Disable
1=Enable
CONFIG_CNTL - RW - 32 bits - [GpuF0MMReg:0x5424]
Field Name
CFG_VGA_RAM_EN (R)
VGA_DIS
GENMO_MONO_ADDRESS_B (R)
GRPH_ADRSEL (R)
Bits
0
Default
0x0
1
2
0x0
0x0
4:3
0x0
Configuration Control Register
Description
VGA RAM enable
0=Disable
1=Enable
VGA Disable. Unused.
Monochrome emulation or Colour emulation
0=Monochrome emulation, regs at 0x3Bx
1=Color/Graphic emulation, regs at 0x3Dx
Graphics address and aperture size select
0=A0000-128K
1=A0000-64K
2=B0000-32K
3=B8000-32K
CONFIG_MEMSIZE - RW - 32 bits - [GpuF0MMReg:0x5428]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-52
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bus Interface Registers
CONFIG_MEMSIZE
31:0
0x0
Configuration memory size
NOTE: Bits 0:19 of this field are hardwired to ZERO.
Scratch regsiter for BIOS to inform driver memory size
CONFIG_F0_BASE - R - 32 bits - [GpuF0MMReg:0x542C]
F0_BASE
Field Name
Bits
31:0
Default
0x0
F0 Base Address
Description
NOTE: Bits 0:24 of this field are hardwired to ZERO.
Configuration F0 Base Register
CONFIG_APER_SIZE - R - 32 bits - [GpuF0MMReg:0x5430]
APER_SIZE
Field Name
Bits
31:0
Default
0x0
Description
Strap-loadable register based on strap MEM_AP_SIZE
NOTE: Bits 0:23 of this field are hardwired to ZERO.
Function 0 Configuration Memory Aperture Size
CONFIG_REG_APER_SIZE - R - 32 bits - [GpuF0MMReg:0x5434]
Field Name
Bits
REG_APER_SIZE
19:0
Function 0 Configuration Register Aperture Size
© 2007 Advanced Micro Devices, Inc.
Proprietary
Default
0x0
Description
Strap-loadable register based on strap REG_AP_SIZE
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-53
PCI-E Registers
2.3
PCI-E Registers
PCIE_INDEX - RW - 32 bits - [GpuF0MMReg,GpuIOReg:0x30]
Field Name
Bits
Default
PCIE_INDEX
7:0
0x0
Index register for the PCI Express common indirect registers
Description
index of bifdec
PCIE_DATA - RW - 32 bits - [GpuF0MMReg,GpuIOReg:0x34]
Field Name
Bits
Default
PCIE_DATA
31:0
0x0
Data register for the PCI Express common indirect registers
Description
data of bifdec
PCIE_RX_NUM_NACK - R - 32 bits - PCIEIND:0xE
Field Name
RX_NUM_NACK
Num nacks received
Bits
31:0
Default
0x0
Description
Total number of nacks received
PCIE_RX_NUM_NACK_GENERATED - R - 32 bits - PCIEIND:0xF
Field Name
RX_NUM_NACK_GENERATED
Num nacks generated
Bits
31:0
Default
0x0
Description
Total number of nacks generated
PCIE_CI_CNTL - RW - 32 bits - PCIEIND:0x20
Field Name
CI_BE_SPLIT_MODE
Bits
1:0
Default
0x0
CI_SLAVE_SPLIT_MODE
2
0x0
CI_SLAVE_GEN_USR_DIS
3
0x0
CI_MST_CMPL_DUMMY_DATA
4
0x1
CI_MST_TAG_MODE
5
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-54
Description
0=Normal byte splitting rules for PCI-Express 1.0A
1=Force a split on QW boundary with maximum packet
length = 2
2=Bypass mode that forces full byte enables
Completions split on Channels
0=RC - Full completions from Channel A or B
1=RC - Completions split on Channel A and B evenly
Sends USR for invalid addresses
0=Sends USR for invalid addresses
1=Disables slave from sending USR, and instead
sends a successful CMPLT_D with dummy data.
0xDEADBEEF or 0xFFFFFFFF
0=0xDEADBEEF
1=0xFFFFFFFF
incremental tag or first available tag
0=incremental tag
1=first available tag
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
CI_SLV_RC_RD_REQ_SIZE
7:6
0x1
CI_SLV_ORDERING_DIS
8
0x0
CI_RC_ORDERING_DIS
9
0x0
CI_SLV_CPL_ALLOC_DIS
10
0x0
CI_SLV_CPL_ALLOC_MODE (R)
11
0x0
chip interface control register
Slave read requests supported size to client.
0=32/64 byte requests supported
1=64 byte requests only
2=16/32/64
Disable slave ordering logic
0=Enable slave ordering logic
1=Disable slave ordering logic
Disable RC ordering logic
0=Enable RC ordering logic
1=Disable RC ordering logic
Slave CPL buffer is sub-divided or not
0=Slave CPL buffer is sub-divided between ports based
on number of lanes active
1=Slave CPL buffer is not sub-divided
Slave Cpl buffer method for sub-division. 0 - dynamic, 1 register limits CI_SLV_CPL_STATIC_ALLOC_LIMIT_(N)S
PCIE_LC_STATE6 - R - 32 bits - PCIEIND:0x22
Field Name
LC_PREV_STATE24
LC_PREV_STATE25
LC_PREV_STATE26
LC_PREV_STATE27
Link Control State Registers
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
24th previous state
25th previous state
26th previous state
27th previous state
Description
PCIE_LC_STATE7 - R - 32 bits - PCIEIND:0x23
Field Name
LC_PREV_STATE28
LC_PREV_STATE29
LC_PREV_STATE30
LC_PREV_STATE31
Link Control State Registers
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
28th previous state
29th previous state
30th previous state
31st previous state
Description
PCIE_LC_STATE8 - R - 32 bits - PCIEIND:0x24
Field Name
LC_PREV_STATE32
LC_PREV_STATE33
LC_PREV_STATE34
LC_PREV_STATE35
Link Control State Registers
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
32nd previous state
33rd previous state
34th previous state
35th previous state
Description
PCIE_LC_STATE9 - R - 32 bits - PCIEIND:0x25
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-55
PCI-E Registers
LC_PREV_STATE36
LC_PREV_STATE37
LC_PREV_STATE38
LC_PREV_STATE39
Link Control State Registers
5:0
13:8
21:16
29:24
0x0
0x0
0x0
0x0
36th previous state
37th previous state
38th previous state
39th previous state
PCIE_LC_STATE10 - R - 32 bits - PCIEIND:0x26
Field Name
LC_PREV_STATE40
LC_PREV_STATE41
LC_PREV_STATE42
LC_PREV_STATE43
Link Control State Registers
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
40th previous state
41st previous state
42nd previous state
43rd previous state
Description
PCIE_LC_STATE11 - R - 32 bits - PCIEIND:0x27
Field Name
LC_PREV_STATE44
LC_PREV_STATE45
LC_PREV_STATE46
LC_PREV_STATE47
Link Control State Registers
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
44th previous state
45th previous state
46th previous state
47th previous state
Description
PCIE_P_CNTL - RW - 32 bits - PCIEIND:0x40
Field Name
P_PWRDN_EN
Bits
0
Default
0x0
P_SYMALIGN_MODE
1
0x0
P_PLL_PWRDN_IN_L1L23
3
0x0
P_PLL_BUF_PDNB
4
0x1
P_TXCLK_SND_PWRDN
5
0x0
P_TXCLK_RCV_PWRDN
6
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-56
Description
Enable powering down transmitter and receiver pads along
with
PLL macros
Data Valid generation bit - iMODE = 0 (Relax Mode):
update its symbol
right away when detect
any bit shift, i.e. data_valid will always
assert. iMODE = 1 (Aggressive Mode): need confirmation
before muxing
out the data
Enable PLL powerdown in L1 or L23 Ready states - only if
all the
associated LC's are in Sates L1 /
L23 corresponding to 4 / 2 lanes
based
on mpConfig and architecture
Disable 10X clock pad on a per PLL basis - should be 1'b0
in order to
activate this powersafe feature.
0=Enable PLL Buffer to power down during L1
1=Always keep PLL Buffer running
Enable powering down TXCLK clock pads on the transmit
side. Each clock
pad corresponds to logic
associated with 4 lanes.
Enable powering down TXCLK clock pads on the receive
side. Each clock
pad corresponds to logic
associated with 4 lanes.
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
PI_SYMALIGN_DIS_ELIDLE
7
0x0
P_MASK_RCVR_EIDLE_EN
8
0x0
P_PLL_PDNB
9
0x1
P_EBUF_SYNC_MODE
10
0x0
P_LDSK_MASK_RCVR_ELEC_IDLE
11
0x0
P_ALLOW_PRX_FRONTEND_SHUTOFF
12
0x0
P_ALWAYS_USE_FAST_TXCLK
13
0x0
P_ELEC_IDLE_MODE
15:14
0x0
RXP_XBAR_MUX0
RXP_XBAR_MUX1
RXP_XBAR_MUX2
RXP_XBAR_MUX3
PI_RXEN_GATER
RXP_REALIGN_ON_EACH_TSX_OR_S
KP
LC_RXP_DONT_ALIGN_ON_TSx
17:16
19:18
21:20
23:22
27:24
28
0x0
0x1
0x2
0x3
0x2
0x1
29
0x1
PHY Control Register
Symbol Alignment Statemachine control signal:
iDIS_ELIDLE = 0,
ElectIdle assertion will
be effective in state machine
re-initialization. iDIS_ELIDLE = 1, ElectIdle will be
ineffective
in state machine
re-initialization
Enable EIDLE mask for powered down receivers.
0=dont intercept ELEC_IDLE in power down
1=intercept ELEC_IDLE in RX power down
Enable PLL only (not the buffer) to power down in L1 or
L23ready states.
0=Enable PLL to power down during L1
1=Always keep PLL running
0=double flops
1=single flop
0=GEN1:not mask-off GEN2: mask-off
1=mask-off for GEN1 and GEN2
Enable PHY's RX FRONTEND to shut off during L1 when
PLL power down is enabled.
0=RX Frontend is always power on
1=RX Frontend is shutoff during L1 when PLL power
down is enabled
Bypass TXCLK_SWITCH and use 500MHz TXCLK from
PLL for both GEN1 and GEN2 speed.
0=TXCLK will be either 250MHz or 500MHz depends on
port speeds
1=Bypass TXCLK_SWITCH and always use 500MHz
TXCLK
Electrical Idle Mode for PI (Physical Layer).
0=GEN1 - entry:PHY, exit:PHY ; GEN2 - entry:infer,
exit:PHY
1=GEN1 - entry:infer, exit:PHY; GEN2 - entry:infer, exit
PHY
2=GEN1 - entry:PHY, exit:PHY ; GEN2 - entry:PHY,
exit:PHY
3=Reserved
Data routing cross bar mux - default 1'b0
Data routing cross bar mux - default 1'b1
Data routing cross bar mux - default 1'b2
Data routing cross bar mux - default 1'b3
0=LDSK only taking deskew on deskewing error detect
1=taking deskew on every TSX and SKP OS
Control Lane Deskew TS detection in L1 and L23
0=Don't mask out TS ordered sets during L1 and L23.
1=Mask out lane deskew TSx detection during L1 and
L23.
PCIE_P_BUF_STATUS - RW - 32 bits - PCIEIND:0x41
Field Name
P_ELASTIC_BUF_OVERFLOW_0
Bits
0
Default
0x0
P_ELASTIC_BUF_OVERFLOW_1
1
0x0
P_ELASTIC_BUF_OVERFLOW_2
2
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Rx to Tx time domain hand-off buffer under/over flow: lane
0
Rx to Tx time domain hand-off buffer under/over flow: lane
1
Rx to Tx time domain hand-off buffer under/over flow: lane
2
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-57
PCI-E Registers
P_ELASTIC_BUF_OVERFLOW_3
3
0x0
P_ELASTIC_BUF_OVERFLOW_4
4
0x0
P_ELASTIC_BUF_OVERFLOW_5
5
0x0
P_ELASTIC_BUF_OVERFLOW_6
6
0x0
P_ELASTIC_BUF_OVERFLOW_7
7
0x0
P_ELASTIC_BUF_OVERFLOW_8
8
0x0
P_ELASTIC_BUF_OVERFLOW_9
9
0x0
P_ELASTIC_BUF_OVERFLOW_10
10
0x0
P_ELASTIC_BUF_OVERFLOW_11
11
0x0
P_ELASTIC_BUF_OVERFLOW_12
12
0x0
P_ELASTIC_BUF_OVERFLOW_13
13
0x0
P_ELASTIC_BUF_OVERFLOW_14
14
0x0
P_ELASTIC_BUF_OVERFLOW_15
15
0x0
P_DESKEW_BUF_OVERFLOW_0
P_DESKEW_BUF_OVERFLOW_1
P_DESKEW_BUF_OVERFLOW_2
P_DESKEW_BUF_OVERFLOW_3
P_DESKEW_BUF_OVERFLOW_4
P_DESKEW_BUF_OVERFLOW_5
P_DESKEW_BUF_OVERFLOW_6
P_DESKEW_BUF_OVERFLOW_7
P_DESKEW_BUF_OVERFLOW_8
P_DESKEW_BUF_OVERFLOW_9
P_DESKEW_BUF_OVERFLOW_10
P_DESKEW_BUF_OVERFLOW_11
P_DESKEW_BUF_OVERFLOW_12
P_DESKEW_BUF_OVERFLOW_13
P_DESKEW_BUF_OVERFLOW_14
P_DESKEW_BUF_OVERFLOW_15
PHY BUFFER STATUS REGISTER
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Rx to Tx time domain hand-off buffer under/over flow: lane
3
Rx to Tx time domain hand-off buffer under/over flow: lane
4
Rx to Tx time domain hand-off buffer under/over flow: lane
5
Rx to Tx time domain hand-off buffer under/over flow: lane
6
Rx to Tx time domain hand-off buffer under/over flow: lane
7
Rx to Tx time domain hand-off buffer under/over flow: lane
8
Rx to Tx time domain hand-off buffer under/over flow: lane
9
Rx to Tx time domain hand-off buffer under/over flow: lane
10
Rx to Tx time domain hand-off buffer under/over flow: lane
11
Rx to Tx time domain hand-off buffer under/over flow: lane
12
Rx to Tx time domain hand-off buffer under/over flow: lane
13
Rx to Tx time domain hand-off buffer under/over flow: lane
14
Rx to Tx time domain hand-off buffer under/over flow: lane
15
Symbol skew buffer over/underflow: lane 0
Symbol skew buffer over/underflow: lane 1
Symbol skew buffer over/underflow: lane 2
Symbol skew buffer over/underflow: lane 3
Symbol skew buffer over/underflow: lane 4
Symbol skew buffer over/underflow: lane 5
Symbol skew buffer over/underflow: lane 6
Symbol skew buffer over/underflow: lane 7
Symbol skew buffer over/underflow: lane 8
Symbol skew buffer over/underflow: lane 9
Symbol skew buffer over/underflow: lane 10
Symbol skew buffer over/underflow: lane 11
Symbol skew buffer over/underflow: lane 12
Symbol skew buffer over/underflow: lane 13
Symbol skew buffer over/underflow: lane 14
Symbol skew buffer over/underflow: lane 15
PCIE_P_DECODER_STATUS - RW - 32 bits - PCIEIND:0x42
Field Name
P_DECODE_ERR_0
Bits
0
Default
0x0
P_DECODE_ERR_1
1
0x0
P_DECODE_ERR_2
2
0x0
P_DECODE_ERR_3
3
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-58
Description
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
P_DECODE_ERR_4
4
0x0
P_DECODE_ERR_5
5
0x0
P_DECODE_ERR_6
6
0x0
P_DECODE_ERR_7
7
0x0
P_DECODE_ERR_8
8
0x0
P_DECODE_ERR_9
9
0x0
P_DECODE_ERR_10
10
0x0
P_DECODE_ERR_11
11
0x0
P_DECODE_ERR_12
12
0x0
P_DECODE_ERR_13
13
0x0
P_DECODE_ERR_14
14
0x0
P_DECODE_ERR_15
15
0x0
P_DISPARITY_ERR_0
16
0x0
P_DISPARITY_ERR_1
17
0x0
P_DISPARITY_ERR_2
18
0x0
P_DISPARITY_ERR_3
19
0x0
P_DISPARITY_ERR_4
20
0x0
P_DISPARITY_ERR_5
21
0x0
P_DISPARITY_ERR_6
22
0x0
P_DISPARITY_ERR_7
23
0x0
P_DISPARITY_ERR_8
24
0x0
P_DISPARITY_ERR_9
25
0x0
P_DISPARITY_ERR_10
26
0x0
P_DISPARITY_ERR_11
27
0x0
P_DISPARITY_ERR_12
28
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the decoding error, i.e. Can't
decode the incoming data.
bit15 => Lane
15 (0 = OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-59
PCI-E Registers
P_DISPARITY_ERR_13
29
0x0
P_DISPARITY_ERR_14
30
0x0
P_DISPARITY_ERR_15
31
0x0
PHY DECODER STATUS REGISTER
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
Indicates which lane has the link error: bit15 => Lane 15 (0
= OK, 1 = error), etc
PCIE_P_MISC_DEBUG_STATUS - RW - 32 bits - PCIEIND:0x43
Field Name
P_LANE_REVERSAL (R)
Bits
2
Default
0x0
P_HW_DEBUG
P_INSERT_ERROR_0
15:4
16
0x0
0x0
P_INSERT_ERROR_1
17
0x0
P_INSERT_ERROR_2
18
0x0
P_INSERT_ERROR_3
19
0x0
P_INSERT_ERROR_4
20
0x0
P_INSERT_ERROR_5
21
0x0
P_INSERT_ERROR_6
22
0x0
P_INSERT_ERROR_7
23
0x0
P_INSERT_ERROR_8
24
0x0
P_INSERT_ERROR_9
25
0x0
P_INSERT_ERROR_10
26
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-60
Description
Lane Reversal
0=All lane order is normal
1=All lane order is reversed
Transmit invalid symbol 10'b0001111001 on lane 0
0=Normal Operation
1=Inserting error on Transmitting Lane0 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 1
0=Normal Operation
1=Inserting error on Transmitting Lane1 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 2
0=Normal Operation
1=Inserting error on Transmitting Lane2 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 3
0=Normal Operation
1=Inserting error on Transmitting Lane3 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 4
0=Normal Operation
1=Inserting error on Transmitting Lane4 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 5
0=Normal Operation
1=Inserting error on Transmitting Lane5 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 6
0=Normal Operation
1=Inserting error on Transmitting Lane6 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 7
0=Normal Operation
1=Inserting error on Transmitting Lane7 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 8
0=Normal Operation
1=Inserting error on Transmitting Lane8 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 9
0=Normal Operation
1=Inserting error on Transmitting Lane9 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 10
0=Normal Operation
1=Inserting error on Transmitting Lane10 by replacing one
symbol with an invalid symbol
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
P_INSERT_ERROR_11
27
0x0
P_INSERT_ERROR_12
28
0x0
P_INSERT_ERROR_13
29
0x0
P_INSERT_ERROR_14
30
0x0
P_INSERT_ERROR_15
31
0x0
Transmit invalid symbol 10'b0001111001 on lane 11
0=Normal Operation
1=Inserting error on Transmitting Lane11 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 12
0=Normal Operation
1=Inserting error on Transmitting Lane12 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 13
0=Normal Operation
1=Inserting error on Transmitting Lane13 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 14
0=Normal Operation
1=Inserting error on Transmitting Lane14 by replacing one
symbol with an invalid symbol
Transmit invalid symbol 10'b0001111001 on lane 15
0=Normal Operation
1=Inserting error on Transmitting Lane15 by replacing one
symbol with an invalid symbol
PHY MISCELLANEOUS DEBUG STATUS REGISTER
PCIE_P_SYMSYNC_CTL - RW - 32 bits - PCIEIND:0x46
Field Name
P_SYMSYNC_ELECT_IDLE_DET_EN
P_SYMSYNC_SYNC_MODE
Bits
0
1
Default
0x1
0x0
P_SYMSYNC_M_GOOD
9:2
0x7
17:10
19:18
0x1
0x3
P_SYMSYNC_BYPASS_MODE
20
0x1
P_SYMSYNC_ENABLE_IN_GEN1
21
0x0
P_SYMSYNC_N_BAD
P_SYMSYNC_PAD_MODE
SYMSYNC Control Registers
Description
Use Electrical Idle Detect to filter out garbage data
SYMSYNC synchronous mode - 1 look for iMGood
consecutive good COMMAs, 0 look for iMGood consecutive
good symbols
M parameter of Good symbols or Commas (should be
greater than two)
N parameter of Bad symbols (can be 1 or more)
Mode select of Good known symbols for replacement of the
Bad symbols
Bypass mode - 1 just let data and DValid flow through
0=Bypass Symsync and Disable Symsync
1=Enable Symsync
Enable Symsync for GEN1
0=SYMSYNC is enabled for GEN2 only
1=Enable Symsync for GEN1 as well
PCIE_P_IMP_CNTL_STRENGTH - RW - 32 bits - PCIEIND:0x60
Field Name
P_TX_STR_CNTL_READ_BACK (R)
P_TX_IMP_CNTL_READ_BACK (R)
P_RX_IMP_CNTL_READ_BACK (R)
P_TX_STR_CNTL
P_TX_IMP_CNTL
P_RX_IMP_CNTL
PI_HALT_IMP_CAL
P_PAD_MANUAL_OVERRIDE
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
3:0
7:4
11:8
19:16
23:20
27:24
28
31
Default
0x0
0x0
0x0
0x7
0x6
0x6
0x0
0x0
Description
Store the readback value of current controller
Store the readback value of TX impedance controller
Store the readback value of RX impedance controller
Set the initial default current strength to 4'b0111
Default TX impedance control value
Default RX impedance control value
Enable Current and Impedance control values to override
0=Allow normal impedance compensation operation
1=Default to manual settings
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-61
PCI-E Registers
PHY IMPEDANCE CONTROL STRENGTH REGISTER
PCIE_P_IMP_CNTL_UPDATE - RW - 32 bits - PCIEIND:0x61
Field Name
P_IMP_PAD_UPDATE_RATE
P_IMP_PAD_SAMPLE_DELAY
P_IMP_PAD_INC_THRESHOLD
P_IMP_PAD_DEC_THRESHOLD
Impedance PAD defaults
Bits
4:0
Default
0xe
12:8
20:16
28:24
0x1
0x18
0x8
Description
PAD's update interval
0=PHY130 default 0xf
1=PHY90 default 0xe
Sampling window
Incremental resolution
Decremental resolution
PCIE_P_STR_CNTL_UPDATE - RW - 32 bits - PCIEIND:0x62
Field Name
P_STR_PAD_UPDATE_RATE
P_STR_PAD_SAMPLE_DELAY
P_STR_PAD_INC_THRESHOLD
P_STR_PAD_DEC_THRESHOLD
Current PAD defaults
Bits
4:0
Default
0xf
12:8
20:16
28:24
0x1
0x18
0x8
Description
PAD's update interval
0=PHY130 default 0xf
1=PHY90 default 0xe
Sampling window
Incremental resolution
Decremental resolution
PCIE_P_PAD_MISC_CNTL - RW - 32 bits - PCIEIND:0x63
Field Name
P_PAD_I_DUMMYOUT (R)
P_PAD_IMP_DUMMYOUT (R)
P_PAD_IMP_TESTOUT (R)
P_LINK_RETRAIN_ON_ERR_EN
Bits
0
1
2
3
Default
0x0
0x0
0x0
0x0
P_PLLCAL_INC_LOWER_PHASE
6:4
0x1
Pad Miscellaneous Control Registers
Description
Input from analog - 0 if PMOS cur is stronger
Input from analog - 0 if PMOS imp is stronger
Input from analog - 1 if NMOS imp is stronger
Disable error counts in LaneDeskew if Symbol unlocking,
Code Errors or Deskew Errors are detected
0=0us
1=1us
2=2us
3=4us
4=8us
5=12us
6=16us
7=24us
PCIE_P_DECODE_ERR_CNTL - RW - 32 bits - PCIEIND:0xEF
Field Name
CODE_ERR_CNT_RESET
DISPARITY_ERR_CNT_RESET
Bits
15:0
31:16
Default
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-62
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
PCIE_P_DECODE_ERR_CNT_0 - R - 32 bits - PCIEIND:0xF0
Field Name
CODE_ERR_CNT_0
DISPARITY_ERR_CNT_0
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_1 - R - 32 bits - PCIEIND:0xF1
Field Name
CODE_ERR_CNT_1
DISPARITY_ERR_CNT_1
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_2 - R - 32 bits - PCIEIND:0xF2
Field Name
CODE_ERR_CNT_2
DISPARITY_ERR_CNT_2
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_3 - R - 32 bits - PCIEIND:0xF3
Field Name
CODE_ERR_CNT_3
DISPARITY_ERR_CNT_3
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_4 - R - 32 bits - PCIEIND:0xF4
Field Name
CODE_ERR_CNT_4
DISPARITY_ERR_CNT_4
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_5 - R - 32 bits - PCIEIND:0xF5
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-63
PCI-E Registers
CODE_ERR_CNT_5
DISPARITY_ERR_CNT_5
15:0
31:16
0x0
0x0
PCIE_P_DECODE_ERR_CNT_6 - R - 32 bits - PCIEIND:0xF6
Field Name
CODE_ERR_CNT_6
DISPARITY_ERR_CNT_6
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_7 - R - 32 bits - PCIEIND:0xF7
Field Name
CODE_ERR_CNT_7
DISPARITY_ERR_CNT_7
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_8 - R - 32 bits - PCIEIND:0xF8
Field Name
CODE_ERR_CNT_8
DISPARITY_ERR_CNT_8
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_9 - R - 32 bits - PCIEIND:0xF9
Field Name
CODE_ERR_CNT_9
DISPARITY_ERR_CNT_9
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_10 - R - 32 bits - PCIEIND:0xFA
Field Name
CODE_ERR_CNT_10
DISPARITY_ERR_CNT_10
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_11 - R - 32 bits - PCIEIND:0xFB
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-64
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
Field Name
CODE_ERR_CNT_11
DISPARITY_ERR_CNT_11
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_12 - R - 32 bits - PCIEIND:0xFC
Field Name
CODE_ERR_CNT_12
DISPARITY_ERR_CNT_12
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_13 - R - 32 bits - PCIEIND:0xFD
Field Name
CODE_ERR_CNT_13
DISPARITY_ERR_CNT_13
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_14 - R - 32 bits - PCIEIND:0xFE
Field Name
CODE_ERR_CNT_14
DISPARITY_ERR_CNT_14
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_P_DECODE_ERR_CNT_15 - R - 32 bits - PCIEIND:0xFF
Field Name
CODE_ERR_CNT_15
DISPARITY_ERR_CNT_15
Bits
15:0
31:16
Default
0x0
0x0
Description
PCIE_TX_CNTL - RW - 32 bits - PCIEIND_P:0x20
Field Name
TX_REPLAY_NUM_COUNT (R)
TX_SNR_OVERRIDE
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
9:0
Default
0x0
11:10
0x0
Description
TX Replay Number Counter - counter to keep track of the
number of replays that have occured
Snoop Not Required Override - control of the Snoop bit for
master requests
0=Generate bit as normal
1=Override equation, and always set bit
2=Override equation, and always clear bit
3=Invalid
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-65
PCI-E Registers
TX_RO_OVERRIDE
13:12
0x0
TX_PACK_PACKET_DIS
14
0x0
TX_GENERATE_CRC_ERR
15
0x0
18:16
19
0x0
0x1
TX_CPL_PASS_P
20
0x0
TX_NP_PASS_P
21
0x0
TX_FC_UPDATE_TIMEOUT_SEL
25:24
0x2
TX_FC_UPDATE_TIMEOUT
TX Control Register
31:26
0x7
TX_GAP_BTW_PKTS
TX_FLUSH_TLP_DIS
Relaxed Ordering Override - control relaxed ordering bit for
master requests
0=Generate bit as normal
1=Override equation, and always set bit
2=Override equation, and always clear bit
3=Invalid
Packet Packing Disable - back-to-back packing of TLP and
DLLP
0=Place packets as close as allowable
1=Place STP/SDP in lane 0 only
Generate CRC errors from TX by zeroing CRC field.
0=Generate proper CRC
1=Generate bad CRC
Number of idle cycles between DLLP and TLP
Disable flushing TLPs when Data Link is down
0=Normal
1=Disable
Ordering rule: Let Completion Pass Posted
0=no pass
1=CPL pass
Ordering rule: Let Non-Posted Pass Posted
0=no pass
1=NP pass
To adjust the length of the timeout interval before sending
out flow control update
0=Disable flow control
1=4x clock cycle
2=1024x clock cycle
3=4096x clock cycle
Interval length to send flow control update
PCIE_TX_SEQ - R - 32 bits - PCIEIND_P:0x24
Field Name
TX_NEXT_TRANSMIT_SEQ
TX_ACKD_SEQ
TX Sequence Register
Field Name
TX_REPLAY_NUM
Bits
11:0
27:16
Default
0x0
0x0
Description
Next Transmit Sequence Number to send out
Last Acknowledged Sequence Number
PCIE_TX_REPLAY - RW - 32 bits - PCIEIND_P:0x25
TX_REPLAY_TIMER_OVERWRITE
TX_REPLAY_TIMER
TX Replay Register
Bits
9:0
Default
0x3
15
31:16
0x0
0x90
Description
Register to control Replay Number before Link goes to
Retrain
Trigger for Replay Timer
Replay Timer - when expired do Replay
PCIE_ERR_CNTL - RW - 32 bits - PCIEIND_P:0x6A
Field Name
ERR_REPORTING_DIS
Bits
0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-66
Description
Disable PCI Express Advanced Error Reporting
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
ERR_GEN_INTERRUPT
SYM_UNLOCKED_EN
1
2
0x0
0x0
Error Control Registers
Enable Interrupt Generation for errors
Enable Reporting of Symbol Unlocked Errors
0=disable reporting unlocked symbol errors
1=report unlocked symbol errors
PCIE_RX_CNTL - RW - 32 bits - PCIEIND_P:0x70
Field Name
RX_IGNORE_IO_ERR
RX_IGNORE_BE_ERR
RX_IGNORE_MSG_ERR
RX_IGNORE_CRC_ERR (R)
RX_IGNORE_CFG_ERR
RX_IGNORE_CPL_ERR
RX_IGNORE_EP_ERR
RX_IGNORE_LEN_MISMATCH_ERR
RX_IGNORE_MAX_PAYLOAD_ERR
RX_IGNORE_TC_ERR
RX_IGNORE_CFG_UR
RX_IGNORE_IO_UR
RX_IGNORE_VEND0_UR
RX_NAK_IF_FIFO_FULL
RX_GEN_ONE_NAK
RX_FC_INIT_FROM_REG
RX_RCB_CPL_TIMEOUT
RX_RCB_CPL_TIMEOUT_MODE
RX_PCIE_CPL_TIMEOUT_DIS
RX Control Register
Bits
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x1
0x0
18:16
0x0
19
20
0x0
0x0
Description
Ignore Malformed I/O TLP Errors
Ignore Malformed Byte Enable TLP Errors
Ignore Malformed Message Error
Ignore CRC Errors
Ignore Malformed Configuration Errors
Ignore Malformed Completion Errors
Ignore Malformed EP Errors
Ignore Malformed Length Mismatch Errors
Ignore Malformed Maximum Payload Errors
Ignore Malformed Traffic Class Errors
RESERVED
RESERVED
Ignore Vendor Type 0 Messages
Send NAK if RX internal FIFO is full
Generate NAK only for the first bad packet until replayed
Flow Control Initialization from registers
0=Init FC from FIFO sizes
1=Init FC from registers
RCB cpl timeout
0=Disable
1=50us
2=2.5ms
3=6.25ms
4=12.5ms
5=25ms
6=125ms
7=0.25ms
RCB cpl timeout on link down
PCIE_RX_CREDITS_ALLOCATED_P - R - 32 bits - PCIEIND_P:0x80
Field Name
RX_CREDITS_ALLOCATED_PD
Bits
11:0
Default
0x0
RX_CREDITS_ALLOCATED_PH
23:16
0x0
Description
For posted TLP data, the number of FC units granted
to transmitter since initialization, modulo 4096
For posted TLP header, the number of FC units granted
to transmitter since initialization, modulo 256
RX Credits Allocated Register (Posted)
PCIE_RX_CREDITS_ALLOCATED_NP - R - 32 bits - PCIEIND_P:0x81
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-67
PCI-E Registers
RX_CREDITS_ALLOCATED_NPD
11:0
0x0
RX_CREDITS_ALLOCATED_NPH
23:16
0x0
RX Credits Allocated Register (Non-Posted)
For non-posted TLP data, the number of FC units granted
to transmitter since initialization, modulo 4096
For non-posted TLP header, the number of FC units
granted
to transmitter since initialization,
modulo 256
PCIE_RX_CREDITS_ALLOCATED_CPL - R - 32 bits - PCIEIND_P:0x82
Field Name
RX_CREDITS_ALLOCATED_CPLD
Bits
11:0
Default
0x0
RX_CREDITS_ALLOCATED_CPLH
23:16
0x0
RX Credits Allocated Register (Completion)
Description
For completion TLP data, the number of FC units granted
to transmitter since initialization, modulo 4096
For completion TLP header, the number of FC units granted
to transmitter since initialization, modulo 256
PCIE_RX_CREDITS_RECEIVED_P - R - 32 bits - PCIEIND_P:0x83
Field Name
RX_CREDITS_RECEIVED_PD
Bits
11:0
Default
0x0
RX_CREDITS_RECEIVED_PH
23:16
0x0
RX Credits Received Register (Posted)
Description
For posted TLP data, the number of FC units consumed
by valid TLP received since initialization, modulo 4096
For posted TLP header, the number of FC units consumed
by valid TLP received since initialization, modulo 256
PCIE_RX_CREDITS_RECEIVED_NP - R - 32 bits - PCIEIND_P:0x84
Field Name
RX_CREDITS_RECEIVED_NPD
Bits
11:0
Default
0x0
RX_CREDITS_RECEIVED_NPH
23:16
0x0
Description
For non-posted TLP data, the number of FC units
consumed
by valid TLP received since
initialization, modulo 4096
For non-posted TLP header, the number of FC units
consumed
by valid TLP received since
initialization, modulo 256
RX Credits Received Register (Non-Posted)
PCIE_RX_CREDITS_RECEIVED_CPL - R - 32 bits - PCIEIND_P:0x85
Field Name
RX_CREDITS_RECEIVED_CPLD
Bits
11:0
Default
0x0
RX_CREDITS_RECEIVED_CPLH
23:16
0x0
RX Credits Received Register (Completion)
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-68
Description
For completion TLP data, the number of FC units consumed
by valid TLP received since
initialization, module 4096
For completion TLP header, the number of FC units
consumed
by valid TLP received since
initialization, module 256
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
PCIE_LC_CNTL - RW - 32 bits - PCIEIND_P:0xA0
Field Name
LC_CM_HI_ENABLE_COUNT
Bits
0
Default
0x0
LC_DONT_ENTER_L23_IN_D0
LC_RESET_L_IDLE_COUNT_EN
LC_RESET_LINK
LC_16X_CLEAR_TX_PIPE
1
2
3
7:4
0x0
0x0
0x0
0x5
LC_L0S_INACTIVITY
11:8
0x0
LC_L1_INACTIVITY
15:12
0x0
LC_PMI_TO_L1_DIS
16
0x0
17
19:18
0x0
0x0
20
0x0
LC_INC_N_FTS_EN
LC_LOOK_FOR_IDLE_IN_L1L23
LC_FACTOR_IN_EXT_SYNC
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Enable count for CM_HIGH - when transmitter is to be
turned on stop when the counter reaches
CM_HI_COUNT_LIMIT_ON.
If number
of lanes = 1 or 2: CM_HI_COUNT_LIMIT_ON = 12 or 10.
If number of lanes = 3 or 4: CM_HI_COUNT_LIMIT_ON =
10 or 12.
If number of lanes > 4:
CM_HI_COUNT_LIMIT_ON = 10 or 15.
Do not enter L23 in D0 state.
Enable reset of electrical idle counter.
Reset an individual link without resetting the other ports.
Adjust the time that the LC waits for the pipe to be idle.
Setting this field to 0 results in the maximum time.
Otherwise, the delay increases as this field is incremented.
L0s inactivity timer setting
0=L0s is disabled
1=40ns
2=80ns
3=120ns
4=200ns
5=400ns
6=1us
7=2us
8=4us
9=10us
10=40us
11=100us
12=400us
13=1ms
14=4ms
L1 inactivity timer setting
0=L1 is disabled
1=1us
2=2us
3=4us
4=10us
5=20us
6=40us
7=100us
8=400us
9=1ms
10=4ms
11=10ms
12=40ms
13=100ms
14=400ms
Disable the transition to L1 caused by programming
PMI_STATE to non-D0
Enable incrementing N_FTS for each transition to recovery
Controls the number of clocks to wait for Electrical Idle set
in L1, L23
0=250
1=100
2=10000
3=3000000
Factor in the extended sync bit in the calculation for the
replay timer adjustment
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-69
PCI-E Registers
LC_WAIT_FOR_PM_ACK_DIS
LC_WAKE_FROM_L23
LC_L1_IMMEDIATE_ACK
LC_ASPM_TO_L1_DIS
LC_DELAY_COUNT
LC_DELAY_L0S_EXIT
LC_DELAY_L1_EXIT
LC_EXTEND_WAIT_FOR_EL_IDLE
LC_ESCAPE_L1L23_EN
LC_GATE_RCVR_IDLE
21
22
23
0x0
0x0
0x0
24
26:25
0x0
0x0
27
28
29
30
31
0x0
0x0
0x1
0x1
0x0
Link Control Register
Disables waiting for PM_ACK in L23 ready entry handshake
For upstream component, wake the link from L23 ready
Always ACK an ASPM L1 entry DLLP (ie. never generate
PM_NAK)
Disable ASPM L1
Controls minimum amount of time to stay in L0s or L1
0=255/ 4095 (Power-down)
1=1250 / 16383 (Power-down)
2=5000/ 65535 (Power-down)
3=25000 / 262143 (Power-down)
Enable staying in L0s for a minimum time
Enable staying in L1 for a minimum time
Wait for Electrical idle in L1/L23 ready value
Enable L1/L23 entry escape arcs
Ignore PHY Electrical idle detector
0=LC will look for PE_LC_IdleDetected
1=To gate off PE_LC_IdleDetected to LC, so that LC
never sees receivers enter EIDLE
PCIE_LC_CNTL2 - RW - 32 bits - PCIEIND_P:0xB1
Field Name
LC_TIMED_OUT_STATE (R)
LC_STATE_TIMED_OUT
LC_LOOK_FOR_BW_REDUCTION
Bits
5:0
6
7
Default
0x0
0x0
0x1
8
9
10
11
12
13
0x0
0x1
0x0
0x0
0x0
0x0
15:14
0x0
LC_DISABLE_INFERRED_ELEC_IDLE_
DET
16
0x0
LC_ALLOW_PDWN_IN_L1
17
0x0
LC_ALLOW_PDWN_IN_L23
18
0x0
LC_DEASSERT_RX_EN_IN_L0S
LC_BLOCK_EL_IDLE_IN_L0
19
20
0x0
0x0
LC_RCV_L0_TO_RCV_L0S_DIS
LC_ASSERT_INACTIVE_DURING_HOL
D
LC_WAIT_FOR_LANES_IN_LW_NEG
LC_PWR_DOWN_NEG_OFF_LANES
LC_DISABLE_LOST_SYM_LOCK_ARCS
21
22
0x0
0x0
24:23
25
26
0x0
0x1
0x1
LC_MORE_TS2_EN
LC_X12_NEGOTIATION_DIS
LC_LINK_UP_REVERSAL_EN
LC_ILLEGAL_STATE
LC_ILLEGAL_STATE_RESTART_EN
LC_WAIT_FOR_OTHER_LANES_MODE
LC_ELEC_IDLE_MODE
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-70
Description
State that the LC was in when the deadman timer expired.
Deadman timer expired.
Enable check for bandwidth change when reporting Link
Bandwidth Notification Status.
0=Do not check if bandwidth was reduced.
1=Check if bandwidth was reduced.
Send out 128 sets instead of 16.
Disable x12 negotiation.
Allow reversal for a wider width in link up.
The LC is in an illegal state.
Enable the LC to be restarted when it is in an illegal state.
Eliminate delay introduced by waiting for other lanes.
0=Identical Training Set based .
1=Timer based.
Electrical Idle Mode for LC.
0=GEN1 - entry:PHY, exit:PHY ; GEN2 - entry:infer,
exit:PHY
1=GEN1 - entry:infer, exit:PHY; GEN2 - entry:infer, exit
PHY
2=GEN1 - entry:PHY, exit:PHY ; GEN2 - entry:PHY,
exit:PHY
3=Reserved
Disable Inferred Electrical Idle detection.
0=Inferred Electrical Idle Detection is enabled
1=Inferred Electrical Idle Detection is disabled
Set the BIF_CHIP_CLK_PDWN output to 1 when the LC is
in the L1 state.
Set the BIF_CHIP_CLK_PDWN output to 1 when the LC is
in the L23_Ready state.
Turn off transmitters when the link is in L0s.
Prevent the Electrical Idle from causing a transition from
Rcv_L0 to Rcv_L0s.
Disable transition from Rcv_L0 to Rcv_L0s
Assert the INACTIVE_LANES signals when
CHIP_BIF_hold_training is high.
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
LC_LINK_BW_NOTIFICATION_DIS (R)
LC_ENABLE_RX_CR_EN_DEASSERTIO
N
LC_TEST_TIMER_SEL
LC_ENABLE_INFERRED_ELEC_IDLE_F
OR_PI
27
28
0x0
0x0
30:29
0x0
31
0x1
Link Control Register 2
To enable deassertion of PG2RX_CR_EN to lock clock
recovery parameter when lane is in electrical idle
0=CR_EN is always asserted
1=CR_EN is deasserted when RX_EN is deasserted
during L0s/L1 and inactive lanes
State timeout select
0=LTSSM uses spec compliant timeout values.
1=LTSSM uses simulation timeout values.
2=LTSSM uses decreased timeout values for lab testing.
3=Reserved
Enable Inferred Electrical Idle Detection for PI (Physical
Layer blocks)
0=Inferred Electrical Idle Detection is disabled for PI
(Physical Layer block)
1=Inferred Electrical Idle Detection is enabled for PI
(Physical Layer block)
PCIE_LC_LINK_WIDTH_CNTL - RW - 32 bits - PCIEIND_P:0xA2
Field Name
LC_LINK_WIDTH
LC_LINK_WIDTH_RD (R)
LC_RECONFIG_ARC_MISSING_ESCAP
E
LC_RECONFIG_NOW
LC_RENEGOTIATION_SUPPORT (R)
Bits
2:0
6:4
7
Default
0x6
0x0
0x0
8
9
0x0
0x0
LC_RENEGOTIATE_EN
LC_SHORT_RECONFIG_EN
LC_UPCONFIGURE_SUPPORT
LC_UPCONFIGURE_DIS
LC_UPCFG_WAIT_FOR_RCVR_DIS
10
11
12
13
14
0x0
0x0
0x0
0x0
0x0
LC_UPCFG_TIMER_SEL
15
0x0
LC_DEASSERT_TX_PDNB
16
0x0
RESERVED
Read back link width
RESERVED
Description
RESERVED
RESERVED
0=Other end does not support link width renegotiation.
1=Other end does support link width renegotiation.
Enable re-negotiation
RESERVED
0=Enable
1=Disable
0=1 msec
1=use LC_WAIT_FOR_LANES_IN_LW_NEG values
TX_PDNB Control for unused lanes
0=Keep TX_PDNB asserts for unused lanes.
1=Deassert TX_PDNB for unused lanes
Link Width Control
PCIE_LC_N_FTS_CNTL - RW - 32 bits - PCIEIND_P:0xA3
Field Name
LC_XMIT_N_FTS
LC_XMIT_N_FTS_OVERRIDE_EN
LC_XMIT_FTS_BEFORE_RECOVERY
LC_XMIT_N_FTS_LIMIT
Bits
7:0
8
9
23:16
Default
0xc
0x0
0x0
0xff
LC_N_FTS (R)
LC Number of FTS Control
31:24
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Number of FTS to override the strap value
Enable the previous field to override the strap value.
Transmit FTS before Recovery.
Limit that the number of FTS can increment to when
incrementing is enabled.
Number of FTS captured from the other end of the link.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-71
PCI-E Registers
PCIE_LC_STATE0 - R - 32 bits - PCIEIND_P:0xA5
Field Name
LC_CURRENT_STATE
LC_PREV_STATE1
LC_PREV_STATE2
LC_PREV_STATE3
Link Control State Register
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
Description
Current LC State
1st Previous LC State
2nd Previous LC State
3rd Previous LC State
PCIE_LC_STATE1 - R - 32 bits - PCIEIND_P:0xA6
Field Name
LC_PREV_STATE4
LC_PREV_STATE5
LC_PREV_STATE6
LC_PREV_STATE7
Link Control State Register
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
Description
4th Previous LC State
5th Previous LC State
6th Previous LC State
7th Previous LC State
PCIE_LC_STATE2 - R - 32 bits - PCIEIND_P:0xA7
Field Name
LC_PREV_STATE8
LC_PREV_STATE9
LC_PREV_STATE10
LC_PREV_STATE11
Link Control State Register
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
Description
8th Previous LC State
9th Previous LC State
10th Previous LC State
11th Previous LC State
PCIE_LC_STATE3 - R - 32 bits - PCIEIND_P:0xA8
Field Name
LC_PREV_STATE12
LC_PREV_STATE13
LC_PREV_STATE14
LC_PREV_STATE15
Link Control State Register
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
Description
12th Previous LC State
13th Previous LC State
14th Previous LC State
15th Previous LC State
PCIE_LC_STATE4 - R - 32 bits - PCIEIND_P:0xA9
Field Name
LC_PREV_STATE16
LC_PREV_STATE17
LC_PREV_STATE18
LC_PREV_STATE19
Link Control State Register
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-72
Description
16th Previous LC State
17th Previous LC State
18th Previous LC State
19th Previous LC State
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
PCIE_LC_STATE5 - R - 32 bits - PCIEIND_P:0xAA
Field Name
LC_PREV_STATE20
LC_PREV_STATE21
LC_PREV_STATE22
LC_PREV_STATE23
Link Control State Register
Bits
5:0
13:8
21:16
29:24
Default
0x0
0x0
0x0
0x0
Description
20th Previous LC State
21st Previous LC State
22nd Previous LC State
23rd Previous LC State
VENDOR_ID - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x0]
Field Name
VENDOR_ID (R)
Bits
15:0
Default
0x1002
Vendor Identification
Description
This field identifies the manufacturer of the device. 0FFFFh
is an invalid value for Vendor ID.
DEVICE_ID - R - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x2]
DEVICE_ID
Field Name
Bits
15:0
Default
0x0
Device Identification
Description
This field identifies the particular device. This identifier is
allocated by the vendor.
COMMAND - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x4]
Field Name
IO_ACCESS_EN
Bits
0
Default
0x0
MEM_ACCESS_EN
1
0x0
BUS_MASTER_EN
2
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Controls a device's response to I/O Space accesses. A
value of 0 disables the device response. A value of 1 allows
the device to respond to I/O Space accesses.State after
RST# is 0.
0=Disable
1=Enable
Controls a device's response to Memory Space accesses.
A value of 0 disables the device response. A value of 1
allows the device to respond to Memory Space accesses.
State after RST# is 0.
0=Disable
1=Enable
Controls the ability of a PCI Express Endpoint to issue
Memory and I/O Read/Write Requests, and the ability of a
Root or Switch Port to forward Memory and I/O Read/Write
Requests in the upstream direction.
0=Disable
1=Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-73
PCI-E Registers
SPECIAL_CYCLE_EN (R)
3
0x0
Does not apply to PCI Express. Hardwired to 0.
0=Disable
1=Enable
MEM_WRITE_INVALIDATE_EN (R)
4
0x0
Does not apply to PCI Express. Hardwired to 0.
0=Disable
1=Enable
PAL_SNOOP_EN (R)
5
0x0
Does not apply to PCI Express. Hardwired to 0.
0=Disable
1=Enable
PARITY_ERROR_RESPONSE
6
0x0
Parity Error Response. Default value of this field is 0.
0=Disable
1=Enable
AD_STEPPING (R)
7
0x0
Address and Data Stepping. Does not apply to PCI
Express. Hardwired to 0.
0=Disable
1=Enable
SERR_EN
8
0x0
When set, enables reporting of Non-fatal and Fatal errors
detected by the device to the Root Complex.
0=Disable
1=Enable
FAST_B2B_EN (R)
9
0x0
Does not apply to PCI Express. Hardwired to 0.
0=Disable
1=Enable
INT_DIS
10
0x0
Controls the ability of a PCI Express device to generate
INTx interrupt Messages. When set, devices are prevented
from generating INTx interrupt Messages. Default value 0
0=Disable
1=Enable
The Command register provides coarse control over a device's ability to generate and respond to PCI cycles.
STATUS - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x6]
Field Name
INT_STATUS (R)
Bits
3
Default
0x0
CAP_LIST (R)
4
0x1
PCI_66_EN (R)
UDF_EN (R)
5
6
0x0
0x0
FAST_BACK_CAPABLE (R)
MASTER_DATA_PARITY_ERROR
7
8
0x0
0x0
Description
Indicates that an INTx interrupt Message is pending
internally to the device.
Indicates the presence of an extended capability list item.
Since all PCI Express devices are required to implement
the PCI Express capability structure, this bit must be set to
1.
Does not apply to PCI Express. Hardwired to 0.
User Defined Status Enable
0=Disable
1=Enable
Does not apply to PCI Express. Hardwired to 0.
This bit is set by Requestor if its Parity Error Enable bit is
set and either of the following two conditions occurs:
1) Requestor receives a Completion marked poisoned
DEVSEL_TIMING (R)
SIGNAL_TARGET_ABORT (R)
10:9
11
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-74
2) Requestor poisons a write Request
0=Inactive
1=Active
Does not apply to PCI Express. Hardwired to 0.
This bit is set when a device completes a Request using
Completer Abort Completion Status.
0=No Abort
1=Target Abort
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
RECEIVED_TARGET_ABORT
12
0x0
This bit is set when a Requestor receives a Completion with
Unsupported Request Completion Status.
0=Inactive
1=Active
RECEIVED_MASTER_ABORT
13
0x0
This bit is set when a Requestor receives a Completion with
Unsupported Request Completion Status.
0=Inactive
1=Active
SIGNALED_SYSTEM_ERROR
14
0x0
This bit must be set whenever the device asserts SERR#.
0=No Error
1=SERR assert
PARITY_ERROR_DETECTED
15
0x0
This bit is set when a device sends an ERR_FATAL or
ERR_NONFATAL Message, and the SERR Enable bit in
the Command register is 1.
The Status register is used to record status information for PCI bus related events.
REVISION_ID - R - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x8]
Field Name
Bits
Default
Description
MINOR_REV_ID
3:0
0x0
Major revision ID. Set by the vendor.
MAJOR_REV_ID
7:4
0x0
Minor revision ID. Set by the vendor.
Specifies a device specific revision identifier. The value is chosen by the vendor.
PROG_INTERFACE - R - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x9]
Field Name
Bits
PROG_INTERFACE
7:0
Register-Level Programming Interface Register
Default
0x0
Description
Unused, only in test environment
SUB_CLASS - R - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xA]
SUB_CLASS
Field Name
Bits
7:0
Default
0x0
Description
The Class Code register is read-only and is used with the
Base Class Code to identify the specific type of device.
Sub Class Code Register
BASE_CLASS - R - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xB]
BASE_CLASS
Field Name
Bits
7:0
Default
0x0
Description
The Class Code register is read-only and is used to identify
the generic function of the device.
Base Class Code Register
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-75
PCI-E Registers
CACHE_LINE - RW - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xC]
Field Name
CACHE_LINE_SIZE
Bits
7:0
Default
0x0
Cache Line Size Register
Description
This read/write register specifies the system cacheline size
in units of DWORDs.
LATENCY - RW - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xD]
Field Name
LATENCY_TIMER (R)
Bits
7:0
Default
0x0
Master Latency Timer Register
Description
Primary/Master latency timer does not apply to PCI
Express. Register is hardwired to 0.
HEADER - RW - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xE]
Field Name
HEADER_TYPE (R)
DEVICE_TYPE (R)
Bits
6:0
7
Default
0x0
0x0
Description
Type 0 or Type 1 Configuration Space
Single function or multi function device
0=Single-Function Device
1=Multi-Function Device
Configuration Space Header
BIST - RW - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xF]
Field Name
BIST_COMP (R)
Bits
3:0
Default
0x0
Description
A value of 0 means the device has passed its test. Non-zero
values mean the device failed. Device-specific failure codes
can be encoded in the non-zero value.
BIST_STRT (R)
6
0x0
Write a 1 to invoke BIST. Device resets the bit when BIST is
complete. Software should fail the device if BIST is not
complete after 2 seconds.
BIST_CAP (R)
7
0x0
This bit is read-only and returns 1 the bridge supports BIST,
otherwise 0 is returned
Built In Self Test Register used for control and status of built-in self tests
CAP_PTR - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x34]
CAP_PTR (R)
Field Name
Bits
7:0
Default
0x50
Capability Pointer
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-76
Description
Pointer to a linked list of additional capabilities implemented
by this device.
50=Point to PM Capability
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
INTERRUPT_LINE - RW - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x3C]
Field Name
INTERRUPT_LINE
Bits
7:0
Default
0xff
Interrupt Line Register
Description
Interrupt Line register communicates interrupt line routing
information.
INTERRUPT_PIN - RW - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x3D]
Field Name
INTERRUPT_PIN (R)
Bits
7:0
Default
0x0
Description
The Interrupt Pin is a read-only register that identifies the
legacy interrupt Message(s) the device (or device function)
uses
NOTE: Bits 3:7 of this field are hardwired to ZERO.
Interrupt Pin Register
ADAPTER_ID - R - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x2C]
Field Name
SUBSYSTEM_VENDOR_ID
(mirror of
ADAPTER_ID_W:SUBSYSTEM_VENDOR_ID)
SUBSYSTEM_ID
Bits
15:0
Default
0x0
31:16
0x0
Description
Subsystem Vendor ID. Specified by the vendor.
Subsystem ID. Specified by the vendor.
(mirror of ADAPTER_ID_W:SUBSYSTEM_ID)
Subsystem Vendor and Subsystem ID Register
MIN_GRANT - RW - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x3E]
MIN_GNT (R)
Field Name
Bits
7:0
Default
0x0
Description
Registers do not apply to PCI Express. Hardwired to 0.
MAX_LATENCY - RW - 8 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x3F]
MAX_LAT (R)
Field Name
Bits
7:0
Default
0x0
Description
Registers do not apply to PCI Express. Hardwired to 0.
ADAPTER_ID_W - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x4C]
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-77
PCI-E Registers
Field Name
SUBSYSTEM_VENDOR_ID
SUBSYSTEM_ID
Adapter ID
Bits
15:0
31:16
Default
0x0
0x0
Description
Subsystem Vendor ID. Specified by the vendor.
Subsystem Vendor ID. Specified by the vendor.
PMI_CAP_LIST - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x50]
Field Name
CAP_ID (R)
NEXT_PTR (R)
Power Management Capbility List
Bits
7:0
Default
0x1
15:8
0x58
Description
Capability ID Must be set to 01h
1=PCIE Power Management Registers
Next Capability Pointer
PMI_CAP - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x52]
Bits
2:0
Default
0x3
PME_CLOCK (R)
DEV_SPECIFIC_INIT (R)
AUX_CURRENT (R)
D1_SUPPORT (R)
3
5
8:6
9
0x0
0x0
0x0
0x0
D2_SUPPORT (R)
10
0x0
15:11
0x0
VERSION (R)
Field Name
PME_SUPPORT (R)
Power Management Capabilities Register
Description
Version
3=PMI Spec 1.2
Does not apply to PCI Express. Hardwired to 0.
Device Specific Initialization
AUX Current
D1 Support
1=Support D1 PM State.
D2 Support
1=Support D2 PM State.
For a device, this indicates the power states in which the
device may generate a PME.
PMI_STATUS_CNTL - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x54]
Field Name
POWER_STATE
NO_SOFT_RESET (R)
PME_EN (R)
DATA_SELECT (R)
DATA_SCALE (R)
PME_STATUS (R)
B2_B3_SUPPORT (R)
BUS_PWR_EN (R)
Bits
1:0
3
8
12:9
14:13
15
22
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
23
0x0
PMI_DATA (R)
31:24
Power Management Status/Control Register
0x0
Power State
Description
PME Enable
Data Select
Data Scale
PME Status
B2/B3 Support Does not apply to PCI Express. Hardwired
to 0.
Bus Power/Clock Control Enable Does not apply to PCI
Express. Hardwired to 0.
Data
PCIE_CAP_LIST - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x58]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-78
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
CAP_ID (R)
7:0
0x10
Indicates the PCI Express Capability structure. This field
must return a Capability ID of 10h indicating that this is a
PCI Express Capability structure.
10=PCI Express capable
NEXT_PTR (R)
15:8
0xa0
Next Capability Pointer -- The offset to the next PCI
capability structure or 00h if no other items exist in the
linked list of capabilities.
The PCI Express Capability List register enumerates the PCI Express Capability structure in the PCI 2.3 configuration space
capability list.
PCIE_CAP - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x5A]
Description
Indicates PCI-SIG defined PCI Express capability structure
version number.
0=PCI Express Cap Version
DEVICE_TYPE (R)
7:4
0x0
Indicates the type of PCI Express logical device.
0=PCI Express Endpoint
1=Legacy PCI Express Endpoint
4=PCI Express Root Complex
SLOT_IMPLEMENTED (R)
8
0x0
This bit when set indicates that the PCI Express Link
associated with this Port is connected to a slot
INT_MESSAGE_NUM (R)
13:9
0x0
Interrupt Message Number.
TCS_ROUTING_SUPPORTED (R)
14
0x0
Trusted Configuration Routing supported.
The PCI Express Capabilities register identifies PCI Express device type and associated capabilities.
VERSION (R)
Field Name
Bits
3:0
Default
0x2
DEVICE_CAP - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x5C]
Field Name
MAX_PAYLOAD_SUPPORT (R)
Description
This field indicates the maximum payload size that the
device can support for TLPs.
0=128B size
PHANTOM_FUNC (R)
4:3
0x0
This field indicates the support for use of unclaimed function
numbers to extend the number of outstanding transactions
allowed by logically combining unclaimed function numbers
with the Tag identifier.
0=No Phantom Functions
EXTENDED_TAG (R)
5
0x1
This field indicates the maximum supported size of the Tag
field as a Requester.
0=8 Bit Tag Supported
L0S_ACCEPTABLE_LATENCY (R)
8:6
0x0
This field indicates the acceptable total latency that an
Endpoint can withstand due to the transition from L0s state
to the L0 state.
L1_ACCEPTABLE_LATENCY (R)
11:9
0x0
This field indicates the acceptable latency that an Endpoint
can withstand due to the transition from L1 state to the L0
state.
ROLE_BASED_ERR_REPORTING (R)
15
0x0
0=Role-Based Error Reporting Disabled
1=Role-Based Error Reporting Enabled
CAPTURED_SLOT_POWER_LIMIT (R)
25:18
0x0
(Upstream Ports only) In combination with the Slot Power
Limit Scale value, specifies the upper limit on power
supplied by slot.
CAPTURED_SLOT_POWER_SCALE (R)
27:26
0x0
Specifies the scale used for the Slot Power Limit Value.
FLR_CAPABLE (R)
28
0x0
This field indicates that a device is capable of initiating
Function Level Resets.
The Device Capabilities register identifies PCI Express device specific capabilities.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
2:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-79
PCI-E Registers
DEVICE_CNTL - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x60]
Field Name
CORR_ERR_EN
Bits
0
Default
0x0
Description
This bit controls reporting of correctable errors. Default
value of this field is 0.
0=Disable
1=Enable
NON_FATAL_ERR_EN
1
0x0
This bit controls reporting of Non-fatal errors. Default value
of this field is 0.
0=Disable
1=Enable
FATAL_ERR_EN
2
0x0
This bit controls reporting of Fatal errors. Default value of
this field is 0.
0=Disable
1=Enable
USR_REPORT_EN
3
0x0
This bit enables reporting of Unsupported Requests when
set. Default value of this field is 0.
0=Disable
1=Enable
RELAXED_ORD_EN
4
0x1
If this bit is set, the device is permitted to set the Relaxed
Ordering bit in the Attributes field of
transactions it initiates that do not require strong write
ordering. Default value of this bit is 1.
0=Disable
1=Enable
MAX_PAYLOAD_SIZE (R)
7:5
0x0
This field sets maximum TLP payload size for the device.
Default value of this field is 000b.
0=128B size
EXTENDED_TAG_EN
8
0x0
When set, this bit enables a device to use an 8-bit Tag field
as a requester.
If the bit is cleared, the device
is restricted to a 5-bit Tag field. Default value of this field is
0.
0=Disable
1=Enable
PHANTOM_FUNC_EN (R)
9
0x0
When set, this bit enables a device to use unclaimed
functions as Phantom Functions to
extend
the number of outstanding transaction identifiers. If the bit is
cleared, the device is not
allowed to use
Phantom Functions.
0=Disable
1=Enable
AUX_POWER_PM_EN (R)
10
0x0
This bit when set enables a device to draw AUX power
independent of PME AUX power.
0=Disable
1=Enable
NO_SNOOP_EN
11
0x1
If this bit is set to 1, the device is permitted to set the No
Snoop bit in the Requester Attributes
of
transactions it initiates that do not require hardware
enforced cache coherency. Default value of this bit is 1.
0=Disable
1=Enable
MAX_REQUEST_SIZE (R)
14:12
0x0
This field sets the maximum Read Request size for the
Device as a Requester. Default value of this field is 010b.
0=128B size
BRIDGE_CFG_RETRY_EN (R)
15
0x0
0=Disable
1=Enable
The Device Control register controls PCI Express device specific parameters.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-80
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
DEVICE_STATUS - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x62]
Field Name
Description
This bit indicates status of correctable errors detected.
This bit indicates status of Nonfatal errors detected.
This bit indicates status of Fatal errors detected.
This bit indicates that the device received an Unsupported
Request.
AUX_PWR (R)
4
0x0
Devices that require AUX power report this bit as set if AUX
power is detected by the device.
TRANSACTIONS_PEND (R)
5
0x0
Endpoints: This bit when set indicates that the device has
issued Non-Posted Requests which have not been
completed.
Root and Switch Ports: This bit
when set indicates that a Port has issued Non-Posted
Requests on its own behalf (using the Port's own Requester
ID) which have not been completed.
The Device Status register provides information about PCI Express device specific parameters.
CORR_ERR
NON_FATAL_ERR
FATAL_ERR
USR_DETECTED
Bits
0
1
2
3
Default
0x0
0x0
0x0
0x0
LINK_CAP - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x64]
Field Name
LINK_SPEED (R)
Bits
3:0
Default
0x1
LINK_WIDTH (R)
9:4
0x0
PM_SUPPORT (R)
11:10
0x3
L0S_EXIT_LATENCY (R)
14:12
0x1
L1_EXIT_LATENCY (R)
17:15
0x2
18
19
0x0
0x0
20
21
31:24
0x0
0x0
0x0
CLOCK_POWER_MANAGEMENT (R)
SURPRISE_DOWN_ERR_REPORTING
(R)
DL_ACTIVE_REPORTING_CAPABLE (R)
LINK_BW_NOTIFICATION_CAP (R)
PORT_NUMBER (R)
Description
This field indicates the maximum Link speed of the given
PCI Express Link.
1=2.5 Gb/s
2=5.0 Gb/s
This field indicates the maximum width of the given PCI
Express Link.
1=x1
2=x2
4=x4
8=x8
12=x12
16=x16
32=x32
This field indicates the level of ASPM supported on the
given PCI Express Link.
This field indicates the L0s exit latency for the given PCI
Express Link.
The value reported indicates
the length of time this Port requires to complete transition
from L0s to L0.
This field indicates the L0s exit latency for the given PCI
Express Link.
The value reported indicates
the length of time this Port requires to complete transition
from L0s to L0.
This field indicates the PCI Express Port number for the
given PCI Express Link.
The Link Capabilities register identifies PCI Express Link specific capabilities.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-81
PCI-E Registers
LINK_CNTL - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x68]
Field Name
PM_CONTROL
Bits
1:0
Default
0x0
READ_CPL_BOUNDARY (R)
3
0x0
LINK_DIS (R)
4
0x0
RETRAIN_LINK (R)
5
0x0
COMMON_CLOCK_CFG
6
0x0
EXTENDED_SYNC
7
0x0
CLOCK_POWER_MANAGEMENT_EN
8
0x0
HW_AUTONOMOUS_WIDTH_DISABLE
9
0x0
Description
This field controls the level of ASPM supported on the given
PCI Express Link.
Defined encodings are:
00b Disabled
01b L0s Entry
Enabled
10b L1 Entry
Enabled
11b L0s and L1
Entry Enabled
Read Completion Boundary. Indicates the RCB value for
the Root Port
0=64 Byte
1=128 Byte
This bit disables the Link when set to 1b. Default value of
this field is 0b.
A write of 1b to this bit initiates Link retraining by directing
the Physical Layer LTSSM
to the Recovery
state. Reads of this bit always return 0b.
This bit when set indicates that this component and the
component at the opposite end of
this Link
are operating with a distributed common reference clock.
Default value of this field is 0b.
This bit when set forces the transmission of 4096 FTS
ordered sets in the L0s
state followed by
a single SKP ordered set
This bit determines if device is permitted to use CLKREQ#
signal to power manage link clock.
When set to 1, this bit disables hardware from changing the
link width for reasons other than attempting to
correct unreliable link operation by reducing link width.
LINK_BW_MANAGEMENT_INT_EN (R)
10
0x0
LINK_AUTONOMOUS_BW_INT_EN (R)
11
0x0
The Link Control register controls PCI Express Link specific parameters.
LINK_STATUS - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x6A]
Field Name
CURRENT_LINK_SPEED (R)
Bits
3:0
Default
0x1
NEGOTIATED_LINK_WIDTH (R)
9:4
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-82
Description
Indicates the negotiated Link speed of the given PCI
Express Link
1=2.5 Gb/s
2=5.0 Gb/s
This field indicates the negotiated width of the given PCI
Express Link.
Defined encodings are:
000001b X1
000010b X2
000100b X4
001000b X8
001100b X12
010000b X16
100000b X32
All other
encodings are reserved.
1=x1
2=x2
4=x4
8=x8
12=x12
16=x16
32=x32
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
LINK_TRAINING (R)
11
0x0
SLOT_CLOCK_CFG (R)
12
0x1
This read-only bit indicates that Link training is in progress
(Physical Layer LTSSM in Configuration or
Recovery state) or that 1b was written to the Retrain Link bit
but Link training has not yet begun.
Hardware clears this bit once Link training is complete.
This bit indicates that the component uses the same
physical reference clock that the
platform
provides on the connector. If the device uses an
independent clock irrespective of the
presence of a reference on the connector, this bit must be
clear.
0=Diff Clock
1=Same Clock
DL_ACTIVE (R)
13
0x0
LINK_BW_MANAGEMENT_STATUS (R)
14
0x0
LINK_AUTONOMOUS_BW_STATUS (R)
15
0x0
The Link Status register provides information about PCI Express Link specific parameters.
DEVICE_CAP2 - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x7C]
Field Name
Bits
Default
Description
CPL_TIMEOUT_RANGE_SUP (R)
3:0
0x0
PCIE completion timeout range supported
CPL_TIMEOUT_DIS_SUP (R)
4
0x0
PCIE completion timeout disabled supported
The Device Capabilities 2 register identifies PCI Express device specific capabilities.
DEVICE_CNTL2 - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x80]
Field Name
Bits
Default
Description
CPL_TIMEOUT_VALUE
3:0
0x0
PCIE completion timeout value
CPL_TIMEOUT_DIS
4
0x0
Disable PCIE completion timeout
The Device Control 2 register controls PCI Express device specific parameters.
DEVICE_STATUS2 - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x82]
Field Name
Bits
Default
Description
RESERVED (R)
15:0
0x0
The Device Status 2 register provides information about PCI Express device specific parameters.
LINK_CAP2 - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x84]
Field Name
Bits
Default
RESERVED (R)
31:0
0x0
The Link Capabilities 2 register identifies PCI Express Link specific capabilities.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-83
PCI-E Registers
LINK_CNTL2 - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x88]
Field Name
TARGET_LINK_SPEED
Bits
3:0
Default
0x1
Description
The upper limit on the operational speed. This field restricts
the data rate values advertised by an upstream component.
ENTER_COMPLIANCE
4
0x0
This bit forces a port's transmitter to enter Compliance.
HW_AUTONOMOUS_SPEED_DISABLE
5
0x0
Controls the component's ability to autonomously direct
changes in link speed.
DE_EMPHASIS_SEL
6
0x0
Selectable de-emphasis (in GEN 2 data rate) 0 : -6dB, 1 :
-3.6dB
DE_EMPHASIS_ENFORCE (R)
7
0x0
For RC, when this bit is set, CHIP should use de-emphasis
value in bit 6 and ignore what was sent in TS1 ordereed
sets in Recover.RcvrLock
XMIT_MARGIN
10:8
0x0
These bits control the value of the non-deemphasized
voltage level at the transmitter pins
ENTER_MOD_COMPLIANCE
11
0x0
LTSSM transmits modified compliance pattern in
Polling.Compliance if this bit is set to 1.
The Link Control 2 register controls PCI Express Link specific parameters.
LINK_STATUS2 - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x8A]
Field Name
Bits
Default
Description
RESERVED (R)
15:0
0x0
The Link Status 2 register provides information about PCI Express Link specific parameters.
MSI_CAP_LIST - R - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xA0]
Field Name
Bits
CAP_ID
7:0
NEXT_PTR
15:8
Message Signaled Interrupt Capability Registers
Default
0x5
0x0
Description
Register identifies if a device function is MSI capable
Pointer to the next item on the capabilities list
MSI_MSG_CNTL - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xA2]
MSI_EN
Field Name
MSI_MULTI_CAP (R)
Bits
0
Default
0x0
3:1
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-84
Description
Enable MSI messaging
0=Disable
1=Enable
Multiple Message Capable register is read to determine the
number of requested messages.
0=1 message allocated
1=2 messages allocated
2=4 messages allocated
3=8 messages allocated
4=16 messages allocated
5=32 messages allocated
6=Reserved
7=Reserved
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
MSI_MULTI_EN
MSI_64BIT (R)
6:4
0x0
7
0x0
Message Signaled Interrupts Control Register
Multiple Message Enable register is written to indicate the
number of allocated messages.
0=1 message allocated
1=2 messages allocated
2=4 messages allocated
3=8 messages allocated
4=16 messages allocated
5=32 messages allocated
6=Reserved
7=Reserved
Signifies if a device function is capable of generating a
64-bit message address
0=Not capable of generating 1 64-bit message address
1=Capable of generating 1 64-bit message address
MSI_MSG_ADDR_LO - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xA4]
Field Name
MSI_MSG_ADDR_LO
Message Lower Address
Bits
31:2
Default
0x0
Description
Message Lower Address - use lower 32-bits of address
MSI_MSG_ADDR_HI - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xA8]
Field Name
MSI_MSG_ADDR_HI
Message Upper Address
Bits
31:0
Default
0x0
Description
Message Upper Address - use upper 32-bit of address
MSI_MSG_DATA_64 - RW - 16 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xAC]
Field Name
MSI_DATA_64
64-bit MSI Message Data
Bits
15:0
Default
0x0
Description
Message Data. System specified.
MSI_MSG_DATA - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0xA8]
Field Name
MSI_DATA
MSI Message Data
Bits
15:0
Default
0x0
Description
Message Data. System specified.
PCIE_ADV_ERR_RPT_ENH_CAP_LIST - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x150]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-85
PCI-E Registers
CAP_ID (R)
15:0
0x1
CAP_VER (R)
19:16
0x1
NEXT_PTR (R)
31:20
0x190
Advanced Error Reporting Enhanced Capability header
This field is a PCI-SIG defined ID number that indicates the
nature and format of the extended capability.
This field is a PCI-SIG defined version number that
indicates the version of the capability structure present.
This field contains the offset to the next PCI Express
capability structure or 000h if no other items exist in the
linked list of capabilities.
PCIE_UNCORR_ERR_STATUS - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x154]
Field Name
Bits
Default
Description
DLP_ERR_STATUS
4
0x0
Data Link Protocol Error Status
SURPDN_ERR_STATUS (R)
5
0x0
PSN_ERR_STATUS
12
0x0
Poisoned TLP Status
FC_ERR_STATUS (R)
13
0x0
Flow Control Protocol Error Status
CPL_TIMEOUT_STATUS
14
0x0
Completion Timeout Status
CPL_ABORT_ERR_STATUS (R)
15
0x0
Completer Abort Status
UNEXP_CPL_STATUS
16
0x0
Unexpected Completion Status
RCV_OVFL_STATUS (R)
17
0x0
Receiver Overflow Status
MAL_TLP_STATUS
18
0x0
Malformed TLP Status
ECRC_ERR_STATUS (R)
19
0x0
ECRC Error Status
UNSUPP_REQ_ERR_STATUS
20
0x0
Unsupported Request Error Status
The Uncorrectable Error Status register reports error status of individual error sources on a PCI Express device.
PCIE_UNCORR_ERR_MASK - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x158]
Field Name
Bits
Default
Description
DLP_ERR_MASK
4
0x0
Data Link Protocol Error Mask
SURPDN_ERR_MASK (R)
5
0x0
PSN_ERR_MASK
12
0x0
Poisoned TLP Mask
FC_ERR_MASK (R)
13
0x0
Flow Control Protocol Error Mask
CPL_TIMEOUT_MASK
14
0x0
Completion Timeout Mask
CPL_ABORT_ERR_MASK (R)
15
0x0
Completer Abort Mask
UNEXP_CPL_MASK
16
0x0
Unexpected Completion Mask
RCV_OVFL_MASK (R)
17
0x0
Receiver Overflow Mask
MAL_TLP_MASK
18
0x0
Malformed TLP Mask
ECRC_ERR_MASK (R)
19
0x0
ECRC Error Mask
UNSUPP_REQ_ERR_MASK
20
0x0
Unsupported Request Error Mask
The Uncorrectable Error Mask register controls reporting of individual errors by the device to the PCI Express Root Complex via
a PCI Express error Message.
PCIE_UNCORR_ERR_SEVERITY - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x15C]
Field Name
DLP_ERR_SEVERITY
SURPDN_ERR_SEVERITY (R)
PSN_ERR_SEVERITY
FC_ERR_SEVERITY (R)
CPL_TIMEOUT_SEVERITY
CPL_ABORT_ERR_SEVERITY (R)
UNEXP_CPL_SEVERITY
RCV_OVFL_SEVERITY (R)
MAL_TLP_SEVERITY
Bits
4
5
12
13
14
15
16
17
18
Default
0x1
0x1
0x0
0x1
0x0
0x0
0x0
0x1
0x1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-86
Description
Data Link Protocol Error Severity
Poisoned TLP Severity
Flow Control Protocol Error Severity
Completion Timeout Error Severity
Completer Abort Error Severity
Unexpected Completion Error Severity
Receiver Overflow Error Severity
Malformed TLP Severity
© 2007 Advanced Micro Devices, Inc.
Proprietary
PCI-E Registers
ECRC_ERR_SEVERITY (R)
19
0x0
ECRC Error Severity
UNSUPP_REQ_ERR_SEVERITY
20
0x0
Unsupported Request Error Severity
The Uncorrectable Error Severity register controls whether an individual error is reported as a Nonfatal or Fatal error.
PCIE_CORR_ERR_STATUS - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x160]
Field Name
Bits
Default
Description
RCV_ERR_STATUS
0
0x0
Receiver Error Status (
BAD_TLP_STATUS
6
0x0
Bad TLP Status
BAD_DLLP_STATUS
7
0x0
Bad DLLP Status
REPLAY_NUM_ROLLOVER_STATUS
8
0x0
REPLAY_NUM Rollover Status
REPLAY_TIMER_TIMEOUT_STATUS
12
0x0
Replay Timer Timeout Status
ADVISORY_NONFATAL_ERR_STATUS
13
0x0
The Correctable Error Status register reports error status of individual correctable error sources on a PCI Express device.
PCIE_CORR_ERR_MASK - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x164]
Field Name
Bits
Default
Description
RCV_ERR_MASK
0
0x0
Receiver Error Mask
BAD_TLP_MASK
6
0x0
Bad TLP Mask
BAD_DLLP_MASK
7
0x0
Bad DLLP Mask
REPLAY_NUM_ROLLOVER_MASK
8
0x0
REPLAY_NUM Rollover Mask
REPLAY_TIMER_TIMEOUT_MASK
12
0x0
Replay Timer Timeout Mask
ADVISORY_NONFATAL_ERR_MASK
13
0x1
The Correctable Error Mask register controls reporting of individual correctable errors by device to the PCI Express Root
Complex via a PCI Express error Message.
PCIE_ADV_ERR_CAP_CNTL - RW - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x168]
Field Name
FIRST_ERR_PTR (R)
Bits
4:0
Default
0x0
ECRC_GEN_CAP (R)
5
0x0
ECRC_GEN_EN
6
0x0
ECRC_CHECK_CAP (R)
7
0x0
ECRC_CHECK_EN
8
0x0
Advanced Error Capabilities and Control Register
Description
The First Error Pointer is a read-only register that identifies
the bit position of the first error reported in the
Uncorrectable Error Status register.
This bit indicates that the device is capable of generating
ECRC
This bit when set enables ECRC generation. Default value
of this field is 0.
This bit indicates that the device is capable of checking
ECRC
This bit when set enables ECRC checking. Default value of
this field is 0.
PCIE_HDR_LOG0 - R - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x16C]
Field Name
Bits
Default
TLP_HDR
31:0
0x0
TLP Header 1st DW
Header Log Register captures the Header for the TLP corresponding to a detected error;
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-87
PCI-E Registers
PCIE_HDR_LOG1 - R - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x170]
Field Name
TLP_HDR
Header Log Register
Bits
31:0
Default
0x0
TLP Header 2nd DW
Description
PCIE_HDR_LOG2 - R - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x174]
Field Name
TLP_HDR
Header Log Register
Bits
31:0
Default
0x0
TLP Header 3rd DW
Description
PCIE_HDR_LOG3 - R - 32 bits - [AudioPcie GpuF0Pcie,GpuF1Pcie:0x178]
Field Name
TLP_HDR
Header Log Register
Bits
31:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-88
TLP Header 4th DW
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Clock Generator Registers
2.4
Clock Generator Registers
PLL_BYPASSCLK_SEL - RW - 32 bits - [GpuF0MMReg:0x608]
Field Name
SPLL_CLKOUT_SEL
Bits
7:0
Default
0x2
MPLL_CLKOUT_SEL
15:8
0x2
Description
1=VCLK-UPLL
2=BCLK
4=XTALIN
8=PCLK
16=MCLK Channel B/ TEST_MCLK
32=MCLK CHANNEL C/TEST_MCLK
64=TEST_SCLK
128=SCAN_SCLK
1=VCLK-UPLL
2=BCLK
4=XTALIN
8=PCLK
16=TEST_MCLK
32=SPLLOUT
64=TEST_SCLK
128=SCAN_MCLK
SPLL_CNTL_MODE - RW - 32 bits - [GpuF0MMReg:0x60C]
Field Name
SPLL_SW_DIR_CONTROL
Bits
0
Default
0x1
SPLL_REFCLK_SRC_SEL
1
0x1
SPLL_TEST
SPLL_FASTEN
SPLL_ENSAT
SPLL_DIV_SYNC
2
3
4
5
0x0
0x1
0x1
0x0
Software or HW control.
Description
1=SW controls the PLL directly. SW will make sure the
way they program SPLL_FUNC_CNTL register follows the
PLL's requested protocol
0=Ref clock from GPIO
1=Ref clock from XTALIN
1=Enable SPLL test mode
1=Enable SPLL fast lock
1=Enable saturation behavior
1=Enable sync of the FB and RF dividers to the FBEN and
RFEN clock from SPLL. This is needed if baby stepping
option is used.
MPLL_FUNC_CNTL - RW - 32 bits - [GpuF0MMReg:0x610]
Field Name
MPLL_RESET
Bits
0
Default
0x1
MPLL_SLEEP
1
0x0
MPLL_REF_DIV
MPLL_FB_DIV
MPLL_PULSEEN
4:2
12:5
13
0x1
0x6f
0x0
MPLL_PULSENUM
MPLL_SW_HILEN
MPLL_SW_LOLEN
15:14
19:16
23:20
0x0
0x0
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
0=Run
1=Reset
0=Power Up
1=Power Down
Reference Divider DEF=0x1
Feedback Divider DEF=111
0=Don't pulse clock
1=Send the numbre of pulses indicated by PULSENUM
Number of pulses to be sent.
Post divider setting: No of high periods of CLKOP
Post divider setting: No of low periods of CLKOP
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-89
Clock Generator Registers
MPLL_DIVEN
MPLL_BYPASS_EN
MPLL_MCLK_SEL
MPLL_CHG_STATUS (R)
24
25
26
29
0x0
0x1
0x0
0x0
MPLL_CTLREQ
30
0x0
MPLL_CTLACK (R)
31
0x0
MPLL function control register
1=Enable PLL CLKOUT divider
1=Enable Bypass mode
1=Use MPLL output as mclk
1=Previous write/change to MPLL_FUNC_CNTL register
has been completed. SW should not issue another write to
this register until this bit is asserted
1=For debug purpose: when SW_DIR_CONTROL is set,
assert this bit will trigger an update of the PLL clock output
mux control. Before write to this bit,
HILEN/LOLEN/PULSEEN/PULSENUM should already
contain the new set of value
1=For debug purpose: when SW_DIR_CONTROL is set,
this value replicates the value of the CTLREQ once the
command has been received and it is safe to send another
request
MPLL_CNTL_MODE - RW - 32 bits - [GpuF0MMReg:0x614]
Field Name
MPLL_SW_DIR_CONTROL
Bits
0
Default
0x1
MPLL_REFCLK_SRC_SEL
1
0x1
MPLL_TEST
MPLL_FASTEN
MPLL_ENSAT
Software of HW control.
2
3
4
0x0
0x1
0x1
Field Name
GLOBAL_PWRMGT_EN
Description
1=SW controls the PLL directly. SW will make sure the
way they program MPLL_FUNC_CNTL register follows the
PLL's requested protocol
0=Ref clock from GPIO
1=Ref clock from XTALIN
1=Enable MPLL test mode
1=Enable MPLL fast lock
1=Enable saturation behavior
GENERAL_PWRMGT - RW - 32 bits - [GpuF0MMReg:0x618]
Bits
0
Default
0x0
STATIC_PM_EN
1
0x0
MOBILE_SU
2
0x0
THERMAL_PROTECTION_DIS
3
0x1
THERMAL_PROTECTION_TYPE
4
0x0
ENABLE_GEN2PCIE
5
0x0
SW_GPIO_INDEX
LOW_VOLT_D2_ACPI
LOW_VOLT_D3_ACPI
VOLT_PWRMGT_EN
7:6
8
9
10
0x0
0x0
0x1
0x1
OPEN_DRAIN_PADS
11
0x1
AVP_SCLK_EN
12
0x1
IDCT_SCLK_EN
13
0x1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-90
Description
0=dynamic power managerment off
1=dynamic power managerment on
0=Disable
1=Enable
0=Regular
1=Optimize power consumption in Suspend mode for
mobile. D2 acts as if in D3 power state.
0=thermal protection Enabled
1=thermal protection Disabled
0=Normal protection - do not turn off gfx clock
1= Catastrophic thermal protection - turn off gfx clock
0=Disabled
1=Enabled
0=Enable low voltage during D2 ACPI state
0=Enable low voltage during D3 ACPI state
0=Off
1=Volt power management on
0= Resistor divider type
1=Voltage control GPIO PADS are open drain type
0=Turn off sclk to AVP
1=Turn ON sclk to AVP
0=Turn off sclk to IDCT
1=Turn ON sclk to IDCT
© 2007 Advanced Micro Devices, Inc.
Proprietary
Clock Generator Registers
GPU_COUNTER_ACPI
14
0x1
GPU_COUNTER_CLK
15
0x0
BACKBIAS_PAD_EN
BACKBIAS_VALUE
16
17
0x0
0x0
BACKBIAS_DPM_CNTL
18
0x0
20:19
21
0x0
0x0
SPREAD_SPECTRUM_INDEX
DYN_SPREAD_SPECTRUM_EN
0=Enable counter in all states
1=Stop gpu counter in D1, D2, D3-cold states
0=Use 27Mhz crystal clock
1=Use 27/2 = 13.5Mhz clock
1=Pad enable for back bias
0=Back bias disabled in software control mode
1=Back bias enabled in software control mode
0=Back bias software control
1=Back bias DPM controlled
1=Enable dynamic spread spectrum ctrl during DPM
mode
SCLK_PWRMGT_CNTL - RW - 32 bits - [GpuF0MMReg:0x620]
Field Name
SCLK_PWRMGT_OFF
Bits
0
Default
0x0
SCLK_TURNOFF
SPLL_TURNOFF
1
2
0x0
0x0
SU_SCLK_USE_BCLK
3
0x0
DYNAMIC_GFX_ISLAND_PWR_DOWN
4
0x0
DYNAMIC_GFX_ISLAND_LP
5
0x0
CLK_TURN_ON_STAGGER
6
0x1
CLK_TURN_OFF_STAGGER
7
0x1
FIR_FORCE_TREND_SEL
FIR_TREND_MODE
8
9
0x0
0x0
DYN_GFX_CLK_OFF_EN
10
0x0
VDDC3D_TURNOFF_D1
VDDC3D_TURNOFF_D2
VDDC3D_TURNOFF_D3
SPLL_TURNOFF_D2
SCLK_LOW_D1
DYN_GFX_CLK_OFF_MC_EN
11
12
13
14
15
16
0x1
0x1
0x1
0x0
0x0
0x1
SCLK domain static power managerment
Description
0=SCLK power managerment on
1=SCLK power managerment off
0=NOT USED. sclk is always on
1=Enable SPLL Power down during D3 stage, override
HW pwrmgt control.
0=Use slower SCLK under suspend mode
1=Use BCLK as SCLK under suspend mode
0=Disable Power Down
1=Enable Power Down
0=Disable Low Power, value retention mode
1=Enable Low Power
0=Disable clock stagger while turning ON clocks
1=Enable
0=Disable clock stagger while turning OFF clocks
1=Enable
1=Force Trend select
0=Select UpTrend
1=Select DownTrend
1=Enable gfx clock to go be turned OFF during dynamic
pwr mgmnt
1=Enable GFX sclk to be turned off during D1 state
1=Enable GFX sclk to be turned off during D2 state
1=Enable GFX sclk to be turned off during D3 state
1=Enable SPLL Power down during D2 stage
1=Enable SCLK to low state during D1
1=Enable gfx clock to be turned OFF for mc tiles during
dynamic pwr mgt
MCLK_PWRMGT_CNTL - RW - 32 bits - [GpuF0MMReg:0x624]
Field Name
MPLL_PWRMGT_OFF
Bits
0
Default
0x0
YCLK_TURNOFF
MPLL_TURNOFF
1
2
0x0
0x0
SU_MCLK_USE_BCLK
3
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
0=MCLK power managerment on during ACPI
1=MCLK power managerment off during ACPI
0=Turn off YCLK during D2/D3 state
0=Enable M domain PLL to be turned off at power state
D3
0=Shut down MCLK during suspend mode
1=Use BCLK as MCLK under suspend mode
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-91
Clock Generator Registers
DLL_READY
4
0x0
MC_BUSY (R)
5
0x0
SPARE
MC_INT_CNTL
6
7
0x0
0x1
MRDCKA_SLEEP
8
0x0
MRDCKB_SLEEP
9
0x0
MRDCKC_SLEEP
10
0x0
MRDCKD_SLEEP
11
0x0
MRDCKE_SLEEP
12
0x0
MRDCKF_SLEEP
13
0x0
MRDCKG_SLEEP
14
0x0
MRDCKH_SLEEP
15
0x0
MRDCKA_RESET
16
0x1
MRDCKB_RESET
17
0x1
MRDCKC_RESET
18
0x1
MRDCKD_RESET
19
0x1
MRDCKE_RESET
20
0x1
MRDCKF_RESET
21
0x1
MRDCKG_RESET
22
0x1
MRDCKH_RESET
23
0x1
DLL_READY_READ (R)
24
0x0
USE_DISPLAY_GAP
25
0x1
USE_DISP_URGENT_NORMAL
26
0x1
USE_DISPLAY_GAP_CTXSW
MPLL_TURNOFF_D2
27
28
0x1
0x0
USE_DISP_URGENT_CTXSW
29
0x1
0=DLL is not ready. Status from Software
1=DLL is ready
0=MC is idle
1=MC is not idle
0=SPARE
0=SW overwrite - Control the DLL lines through software,
if HW control doesnt work
1=HW control
0=Enable Channel A DLL
1=PowerDown Channel A DLL
0=Enable Channel B DLL
1=PowerDown Channel B DLL
0=Enable Channel C DLL
1=PowerDown Channel C DLL
0=Enable Channel D DLL
1=PowerDown Channel D DLL
0=Enable Channel E DLL
1=PowerDown Channel E DLL
0=Enable Channel F DLL
1=PowerDown Channel F DLL
0=Enable Channel G DLL
1=PowerDown Channel G DLL
0=Enable Channel H DLL
1=PowerDown Channel H DLL
0=Enable Channel A DLL
1=Reset Channel A DLL
0=Enable Channel B DLL
1=Reset Channel B DLL
0=Enable Channel C DLL
1=Reset Channel C DLL
0=Enable Channel D DLL
1=Reset Channel D DLL
0=Enable Channel E DLL
1=Reset Channel E DLL
0=Enable Channel F DLL
1=Reset Channel F DLL
0=Enable Channel G DLL
1=Reset Channel G DLL
0=Enable Channel H DLL
1=Reset Channel H DLL
0=DLL is not ready - status from CG
1=DLL is ready
0=Not followed
1=Display Gap interface followed
1=Use CG_MC_display_urgent during normal mclk
switching
1=During context switch use display gap
0=Enable M domain PLL to be turned off at power state
D2
1=Use CG_MC_display_urgent during ctxsw mclk
switching
DLL_CNTL - RW - 32 bits - [GpuF0MMReg:0x62C]
Field Name
DLL_RESET_TIME
DLL_LOCK_TIME
MRDCKA_BYPASS
Bits
9:0
21:12
24
Default
0x1f4
0xfa
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-92
Description
DEF=500
DEF=250
0=Enable Bypass Channel A DLL
1=Disable Bypass Channel A DLL
© 2007 Advanced Micro Devices, Inc.
Proprietary
Clock Generator Registers
MRDCKB_BYPASS
25
0x0
MRDCKC_BYPASS
26
0x0
MRDCKD_BYPASS
27
0x0
MRDCKE_BYPASS
28
0x0
MRDCKF_BYPASS
29
0x0
MRDCKG_BYPASS
30
0x0
MRDCKH_BYPASS
31
0x0
0=Enable Bypass Channel B DLL
1=Disable Bypass Channel B DLL
0=Enable Bypass Channel C DLL
1=Disable Bypass Channel C DLL
0=Enable Bypass Channel D DLL
1=Disable Bypass Channel D DLL
0=Enable Bypass Channel E DLL
1=Disable Bypass Channel E DLL
0=Enable Bypass Channel F DLL
1=Disable Bypass Channel F DLL
0=Enable Bypass Channel G DLL
1=Disable Bypass Channel G DLL
0=Enable Bypass Channel H DLL
1=Disable Bypass Channel H DLL
DLL control register
SPLL_TIME - RW - 32 bits - [GpuF0MMReg:0x630]
Field Name
SPLL_LOCK_TIME
SPLL_RESET_TIME
SPLL related timing counter
Bits
15:0
31:16
Default
0x2000
0x1f4
DEF=0x2000
DEF=500
Description
MPLL_TIME - RW - 32 bits - [GpuF0MMReg:0x634]
Field Name
MPLL_LOCK_TIME
MPLL_RESET_TIME
MPLL related timing counter
Bits
15:0
31:16
Default
0x2000
0x1f4
Description
ERROR_STATUS - R - 32 bits - [GpuF0MMReg:0x640]
Field Name
OVERCLOCK_DETECTION_SCLK
Bits
0
Default
0x0
OVERCLOCK_DETECTION_YCLK
1
0x0
Description
0=No overclock for SCLK
1=SCLK overclock
0=No overclock for YCLK
1=YCLK overclock
SPLL_UNLOCK
2
0x0
YPLL_UNLOCK
3
0x0
YPLL2_UNLOCK
4
0x0
UPLL_UNLOCK
5
0x0
ACPI_STATE
8:6
0x0
MCHG_STATE
11:9
0x0
FCHANGE_STATE
15:12
0x0
DPM_STATE
19:16
0x0
SCHANGE_STATE
22:20
0x0
SPLL_DIVEN_STATE
24:23
0x0
VCHG_STAGE
26:25
0x0
SPLL_SW_FSM_STATE
29:27
0x0
CG related error status, any reads to this register will clean the status.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-93
Clock Generator Registers
CG_CLKPIN_CNTL - RW - 32 bits - [GpuF0MMReg:0x644]
Field Name
Bits
0
Default
0x1
XTL_LOW_GAIN
1
0x1
CG_CLK_TO_OUTPIN
2
0x0
OSC_USE_CORE
3
0x0
TEST_MCLK_RE
TEST_YCLK_RE
GENERICA_OE
4
5
6
0x0
0x0
0x0
MUX_TCLK_TO_XCLK
7
0x0
OSC_EN
Description
0=Disable Oscillation
1=Enable Oscillation
0=High Gain
1=Low Gain
0=Disabled
1=Send out selected clock for jitter test
0=Pad routing OSC
1=Core routing OSC
0=Receiver Enable for TEST_MCLK pad
0=Receiver Enable for TEST_YCLK pad
0=Enable selected clock to be observed through
GENERICA pad
1=Mux free running tclk into xclk
PLL_TEST_CNTL - RW - 32 bits - [GpuF0MMReg:0x79C]
Field Name
TST_SRC_SEL
TST_REF_SEL
REF_TEST_COUNT
TST_RESET
TEST_COUNT (R)
PLL frequency measurement control
Bits
3:0
7:4
14:8
15
31:17
Default
0x0
0x0
0x0
0x0
0x0
Description
FIX=0
CG_TC_JTAG_0 - RW - 32 bits - [GpuF0MMReg:0x7A0]
CG_TC_TMS
Field Name
CG_TC_TDI
CG_TC_MODE
CG_TC_TDO_MASK
Bits
7:0
Default
0x0
15:8
0x0
16
0x0
31:24
0x0
Description
DEF = 0x0
8 consecutive values for TMS. Bit 0 is sent first.
DEF = 0x0
8 consecutive values for TDI. Bit 0 is sent first.
0=Disabled
1=CG JTAG mode Enabled
Indicates what clock should be used for TCK in the JTAG
transactions.
DEF = 0x0
A mask indicating whether the TDO value should be read
back for a given JTAG cycle. Bit 0 corresponds to the first
TDO sample. This mask can be used to prevent the
readback of unknown values across the bus interface
during simulation. This field can be set to all 1's on real
hardware.
CG Interface to the Test Controller (TC) using IEEE JTAG protocol. This register can be written with 8 consecutive values for the inputs to the TC's JTAG
port. These 8 inputs are sent at consecutive TCK clock edges. The final value is held for indefinitely many TCK clock edges until the next write to
this register. The register can be used to walk through several states of the JTAG state machine and typically the state machine would be left in
a 'paused' state. The TDO values sampled at the 8 edges for which input was provided is available for readback from the TC_CG_TDO field of
the CG_TC_JTAG_1 register.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-94
© 2007 Advanced Micro Devices, Inc.
Proprietary
Clock Generator Registers
CG_TC_JTAG_1 - R - 32 bits - [GpuF0MMReg:0x7A4]
TC_CG_TDO
Field Name
TC_CG_DONE
Bits
7:0
Default
0x0
31
0x0
Description
8 consecutive sampled values of TDO. Bit 0 corresponds to
the cycle that the first bit of CG_TC_JTAG_0.CG_TC_TMS
and
CG_TC_JTAG_0.CG_TC_TDI were sampled by the Test
Controller.
0=We have completed less than 8 JTAG cycles since the
last write to CG_TC_JTAG_0
1=All 8 JTAG cycles have been completed since the last
write to CG_TC_JTAG_0
Indicates whether the JTAG sequence has completed.
TDO readback and status bits for the CG JTAG interface described in more detail in the CG_TC_JTAG_0 register description.
CG_MISC_REG - RW - 32 bits - [GpuF0MMReg:0x7C8]
Field Name
SYNCHRONIZER_COUNTER
Miscellaneous Register
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
31:28
Default
0x0
Description
delay for restarting the clock while switching from one clock
to another
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-95
VIP/I2C Registers
2.5
VIP/I2C Registers
2.5.1
I2C Registers
I2C_CNTL_0 - RW - 32 bits - [GpuF0MMReg:0xBC0]
Field Name
I2C_DONE
Bits
0
Default
0x0
I2C_NACK
1
0x0
I2C_HALT
2
0x0
I2C_SOFT_RST
5
0x0
I2C_DRIVE_EN
6
0x0
I2C_DRIVE_SEL
7
0x0
I2C_START
8
0x0
I2C_STOP
9
0x0
I2C_RECEIVE
10
0x0
I2C_ABORT
11
0x0
I2C_GO
12
0x0
31:16
0x0
I2C_PRESCALE
I2C control registers
Description
Read only. Indicate whether current I2C request is finished
or not
0=I2c is busy
1=transfer is complete
Read only. Status bit indicate whether I2C slave did not
acknowledge.
1=Slave did not issue acknowledge
Read only. Status bit indicate where I2C bus transfer is
time out.
1=Time-out condition, transfer is halted
Software reset I2C interface block
0=Normal
1=Resets i2c controller
Enable I2C pad driving pull-up action
0=Pullup by external resistor
1=I2C pads drive SDA
If DRIVE_EN is HIGH, select drive time
0=Drive for 10MCLKs
1=20MCLKS
Indicate whether use the start condition in I2C protocol.
0=No start
1=Start
Indicate whether use the stop condition in I2C protocol.
0=No stop
1=Stop
Master receive/transmit mode selection
0=Send
1=Receive
If 1, abort the current I2C operation by sending STOP bit.
0=No abort
1=Abort
Write this bit initiate I2C operation. Read this bit indicate the
I2C operation is finished or not.
I2C clock divider to generate I2C SCL output. It also
indirectly control the sampling rate.
I2C_CNTL_1 - RW - 32 bits - [GpuF0MMReg:0xBC4]
Field Name
I2C_DATA_COUNT
Bits
3:0
Default
0x0
I2C_ADDR_COUNT
6:4
0x0
I2C_INTRA_BYTE_DELAY
I2C_SEL
15:8
16
0x0
0x0
I2C_EN
I2C_TIME_LIMIT
17
31:24
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-96
Description
Byte count for data to be transferred through I2C interface.
The data should be in the 16 bytes I2C buffer
Byte count for I2C addresses. Maximum 3 bytes of address
can be transferred.
Not used in Rage5
0=Pullup by external resistor
1=I2C pads drive SCL
Enable I2C
Time out limit. Total wait time = TIME_LIMIT * 4 *
PRESCLAE(15:8) cycles for SCL to be LOW
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
I2C control registers
I2C_DATA - RW - 32 bits - [GpuF0MMReg:0xBC8]
Field Name
Bits
7:0
Description
I2C data interface. Programmers use this 8bits interface to
write and read I2C bus data.
I2C data registers. Programmers use this 8bits interface to write and read I2C bus data.
I2C_DATA
Default
0x0
DC_I2C_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D30]
Field Name
DC_I2C_GO (W)
DC_I2C_SOFT_RESET
DC_I2C_SEND_RESET
Bits
0
1
2
Default
0x0
0x0
0x0
DC_I2C_SW_STATUS_RESET
3
0x0
DC_I2C_SDVO_EN
4
0x0
DC_I2C_SDVO_ADDR_SEL
6
0x0
DC_I2C_DDC_SELECT
10:8
0x0
DC_I2C_TRANSACTION_COUNT
21:20
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Write 1 to start I2C transfer.
Write 1 to reset I2C controller
Set to 1 to send reset sequence (9 clocks with no data) at
start of transfer. This sequence is sent after DC_I2C_GO is
written to 1, before the first transaction only.
Write 1 to reset DC_I2C_SW_STATUS flags, will reset
SW_DONE, ABORTED, TIMEOUT, SW_INTERRUPTED,
BUFFER_OVERFLOW, STOPPED_ON_NACK, NACK0,
NACK1, NACK2, NACK3
Set to 1 to send two transactions to configure SDVO bus for
DDC before main transaction.
The SDVO transaction is as follows:
S-AAw-a-07-a-02-a-P-S-AAw-a-08-a-7A-a-P
where AA is the address and is selected by
DC_I2C_SDVO_ADDR_SEL.
The SDVO transactions take place after the RESET
transaction (if enabled) and before the remaining
transactions.
0=Disable
1=Enable
Use to select address for SDVO I2C bus configuration
0=0x70
1=0x72
Select DDC pins set, dddc1, ddc2, ddc3
0=0 = DDC1
1=1 = DDC2
2=2 = DDC3
3=3-7 = Reserved
Number of transactions to be done in current transfer.
0=transaction0 only
1=transaction0, transaction1
2=transaction0, transaction1, transaction2
3=transaction0, transaction1, transaction2, transaction3
(DC_I2C_REPEAT=0 only)
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-97
VIP/I2C Registers
DC_I2C_ARBITRATION - RW - 32 bits - [GpuF0MMReg:0x7D34]
Field Name
DC_I2C_SW_PRIORITY
Bits
1:0
Default
0x1
Description
Sets priority for software I2C requests. This setting applies
only when HDCP is using I2C bus and software also wants
to use the same I2C bus
0=Normal - If DC_I2C_NO_QUEUED_SW_GO = 0,
software I2C transaction will be queued after HW I2C. If
DC_I2C_NO_QUEUED_SW_GO = 1, software I2C
transaction is not queued, in this case, software have to poll
for DC_I2C_DDCx_HW_DONE doing any I2C transaction
1=High - Software always interrupts HW I2C if HDCP is
using the same I2C bus, HW I2C will automatically resume
once software I2C is completed
2=Reserved
3=Reserved
DC_I2C_NO_QUEUED_SW_GO
4
0x0
Set to 1 to disable queuing of software I2C GO. If this bit is
set, then if software writes DC_I2C_GO while I2C is in use
by hardware, the GO request will be ignored and the
DC_I2C_SW_INTERRUPTED bit set.
DC_I2C_NO_RESTART_SW_GO
5
0x0
Set to 1 to disable restart of software I2C transaction that
was interrupted by hardware. Typically this bit should be 0,
unless there is a problem with the I2C restart mechanism.
When this bit is set to 0, the DC_I2C_SW_DONE bit will not
be set if hardware interrupts the software transfer.
DC_I2C_ABORT_HW_XFER (W)
8
0x0
Write 1 to abort current HW transfer (send stop if transfer
has started)
DC_I2C_ABORT_SW_XFER (W)
12
0x0
Write 1 to abort current SW transfer (send stop if transfer
has started)
Configure arbitration between hardware and software use of the DC_I2C engine
DC_I2C_INTERRUPT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D38]
Field Name
DC_I2C_SW_DONE_INT (R)
DC_I2C_SW_DONE_ACK (W)
Bits
0
1
Default
0x0
0x0
DC_I2C_SW_DONE_MASK
2
0x0
DC_I2C_DDC1_HW_DONE_INT (R)
DC_I2C_DDC1_HW_DONE_ACK (W)
4
5
0x0
0x0
DC_I2C_DDC1_HW_DONE_MASK
6
0x0
DC_I2C_DDC2_HW_DONE_INT (R)
DC_I2C_DDC2_HW_DONE_ACK (W)
8
9
0x0
0x0
DC_I2C_DDC2_HW_DONE_MASK
10
0x0
DC_I2C_DDC3_HW_DONE_INT (R)
DC_I2C_DDC3_HW_DONE_ACK (W)
12
13
0x0
0x0
DC_I2C_DDC3_HW_DONE_MASK
14
0x0
DC_I2C_DDC4_HW_DONE_INT (R)
DC_I2C_DDC4_HW_DONE_ACK (W)
DC_I2C_DDC4_HW_DONE_MASK
16
17
18
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-98
Description
SW_DONE interrupt status
Acknowledge bit for DC_I2C_SW_DONE_INT. Write 1 to
clear interrupt.
Mask bit for DC_I2C_SW_DONE_INT. Set to 1 to enable
interrupt.
DDC1 HW_DONE interrupt status
DDC1 Acknowledge bit for
DC_I2C_HW_DDC1_DONE_INT. Write 1 to clear interrupt.
DDC1 Mask bit for DC_I2C_HW_DDC1_DONE_INT. Set
to 1 to enable interrupt.
DDC2 HW_DONE interrupt status
DDC2 Acknowledge bit for
DC_I2C_HW_DDC2_DONE_INT. Write 1 to clear interrupt.
DDC2 Mask bit for DC_I2C_HW_DDC2_DONE_INT. Set
to 1 to enable interrupt.
DDC3 HW_DONE interrupt status
DDC3 Acknowledge bit for
DC_I2C_HW_DDC3_DONE_INT. Write 1 to clear interrupt.
DDC3 Mask bit for DC_I2C_HW_DDC3_DONE_INT. Set
to 1 to enable interrupt.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
DC_I2C_SW_STATUS - RW - 32 bits - [GpuF0MMReg:0x7D3C]
Field Name
DC_I2C_SW_STATUS (R)
Bits
1:0
Default
0x0
DC_I2C_SW_DONE (R)
2
0x0
DC_I2C_SW_ABORTED (R)
4
0x0
DC_I2C_SW_TIMEOUT (R)
5
0x0
DC_I2C_SW_INTERRUPTED (R)
6
0x0
DC_I2C_SW_BUFFER_OVERFLOW (R)
7
0x0
DC_I2C_SW_STOPPED_ON_NACK (R)
8
0x0
DC_I2C_SW_SDVO_NACK (R)
DC_I2C_SW_NACK0 (R)
10
12
0x0
0x0
DC_I2C_SW_NACK1 (R)
13
0x0
DC_I2C_SW_NACK2 (R)
14
0x0
DC_I2C_SW_NACK3 (R)
15
0x0
DC_I2C_SW_REQ (R)
18
0x0
Description
Current SW status of DC_I2C
0=Idle
1=In use by SW
2=In use by HW
3=Reserved
Set on completion of SW transfer. Cleared by writing
DC_I2C_SW_DONE_ACK to 1
Indicates that abort request ccurred during SW transfer,
stopping transfer. Cleared on GO.
Indicates that timeout condition occurred during SW
transfer, stopping transfer. Cleared on GO.
Indicates that SW transfer was interrupted by hardware
request. Cleared on GO.
Indicates that buffer overflow occurred during SW transfer,
stopping transfer. Cleared on GO.
Indicates that SW transfer was interrpted due to NACK
when STOP_ON_NACK=1. Cleared on GO.
Indicates that I2C slave did not issue an acknowledge
during the first SW transaction. Cleared on GO.
Indicates that I2C slave did not issue an acknowledge
during the second SW transaction. Cleared on GO.
Indicates that I2C slave did not issue an acknowledge
during the third SW transaction. Cleared on GO.
Indicates that I2C slave did not issue an acknowledge
during the fourth SW transaction. Cleared on GO.
Software requests use of DC_I2C interface (indicates that
request is pending - i.e. queued). Cleared when request
becomes active or by DC_I2C_ABORT_SW_XFER.
Status fields for DC_I2C engine
DC_I2C_DDC1_HW_STATUS - RW - 32 bits - [GpuF0MMReg:0x7D40]
Field Name
DC_I2C_DDC1_HW_STATUS (R)
Bits
1:0
Default
0x0
DC_I2C_DDC1_HW_DONE (R)
3
0x0
DC_I2C_DDC1_HW_REQ (R)
16
0x0
DC_I2C_DDC1_HW_URG (R)
17
0x0
Description
Current HW status of DC_I2C
0=Idle
1=In use by SW
2=In use by HW
3=Reserved
Set on completion of HW transfer. Cleared by writing
DC_I2C_HW_DONE_ACK to 1
Hardware requests use of DC_I2C interface (indicates that
request is pending - i.e. queued). Cleared when request
becomes active or by DC_I2C_ABORT_HW_XFER.
Indicates that hardware I2C request is urgent (used by
arbitration logic).
Status fields for DC_I2C engine
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-99
VIP/I2C Registers
DC_I2C_DDC2_HW_STATUS - RW - 32 bits - [GpuF0MMReg:0x7D44]
Field Name
DC_I2C_DDC2_HW_STATUS (R)
Bits
1:0
Default
0x0
DC_I2C_DDC2_HW_DONE (R)
3
0x0
DC_I2C_DDC2_HW_REQ (R)
16
0x0
DC_I2C_DDC2_HW_URG (R)
17
0x0
Status fields for DC_I2C engine
Description
Current HW status of DC_I2C
0=Idle
1=In use by SW
2=In use by HW
3=Reserved
Set on completion of HW transfer. Cleared by writing
DC_I2C_HW_DONE_ACK to 1
Hardware requests use of DC_I2C interface (indicates that
request is pending - i.e. queued). Cleared when request
becomes active or by DC_I2C_ABORT_HW_XFER.
Indicates that hardware I2C request is urgent (used by
arbitration logic).
DC_I2C_DDC3_HW_STATUS - RW - 32 bits - [GpuF0MMReg:0x7D48]
Field Name
DC_I2C_DDC3_HW_STATUS (R)
Bits
1:0
Default
0x0
DC_I2C_DDC3_HW_DONE (R)
3
0x0
DC_I2C_DDC3_HW_REQ (R)
16
0x0
DC_I2C_DDC3_HW_URG (R)
17
0x0
Status fields for DC_I2C engine
Description
Current HW status of DC_I2C
0=Idle
1=In use by SW
2=In use by HW
3=Reserved
Set on completion of HW transfer. Cleared by writing
DC_I2C_HW_DONE_ACK to 1
Hardware requests use of DC_I2C interface (indicates that
request is pending - i.e. queued). Cleared when request
becomes active or by DC_I2C_ABORT_HW_XFER.
Indicates that hardware I2C request is urgent (used by
arbitration logic).
DC_I2C_DDC1_SPEED - RW - 32 bits - [GpuF0MMReg:0x7D4C]
Field Name
DC_I2C_DDC1_THRESHOLD
DC_I2C_DDC1_PRESCALE
Bits
1:0
Default
0x2
31:16
0x0
Description
Select threshold to use to determine whether value
sampled on SDA is a 1 or 0. Specified in terms of the ratio
between the number of sampled ones and the total number
of times SDA is sampled.
0=>0
1=1/4 of total samples
2=1/2 of total samples
3=3/4 of total samples
prescale = (m * xtal_frequency) / (desired_i2c_speed),
where m is multiply factor, default: m = 1
DDC1 speed setting
DC_I2C_DDC1_SETUP - RW - 32 bits - [GpuF0MMReg:0x7D50]
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-100
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
Field Name
DC_I2C_DDC1_DATA_DRIVE_EN
Bits
0
Default
0x0
DC_I2C_DDC1_DATA_DRIVE_SEL
1
0x0
DC_I2C_DDC1_CLK_DRIVE_EN
7
0x0
DC_I2C_DDC1_INTRA_BYTE_DELAY
15:8
0x0
DC_I2C_DDC1_INTRA_TRANSACTION_
DELAY
DC_I2C_DDC1_TIME_LIMIT
23:16
0x0
31:24
0x0
DDC1 SETUP
Description
Select whether SDA pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SDA high
0=Pullup by external resistor
1=I2C pads drive SDA
Select number of clocks to drive SDA high
0:Drive for 10 SCLKs
1:Drive for 20 SCLKs
0=Drive for 10MCLKs
1=20MCLKS
Select whether SCL pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SCL high
0=Pullup by external resistor
1=I2C pads drive SCL
Use to specify delay between bytes in units of I2C
reference.
Use to specify delay between transactions in units of I2C
reference.
Time limit, in units of 256 I2C fast reference (TOCLK)
pulses, to wait before timeout when clock is stalled by
external device.
DC_I2C_DDC2_SPEED - RW - 32 bits - [GpuF0MMReg:0x7D54]
Field Name
DC_I2C_DDC2_THRESHOLD
DC_I2C_DDC2_PRESCALE
Bits
1:0
Default
0x2
31:16
0x0
DDC2 speed setting
Description
Select threshold to use to determine whether value
sampled on SDA is a 1 or 0. Specified in terms of the ratio
between the number of sampled ones and the total number
of times SDA is sampled.
0=>0
1=1/4 of total samples
2=1/2 of total samples
3=3/4 of total samples
prescale = (m * xtal_frequency) / (desired_i2c_speed),
where m is multiply factor, default: m = 1
DC_I2C_DDC2_SETUP - RW - 32 bits - [GpuF0MMReg:0x7D58]
Field Name
DC_I2C_DDC2_DATA_DRIVE_EN
Bits
0
Default
0x0
DC_I2C_DDC2_DATA_DRIVE_SEL
1
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Select whether SDA pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SDA high
0=Pullup by external resistor
1=I2C pads drive SDA
Select number of clocks to drive SDA high
0:Drive for 10 SCLKs
1:Drive for 20 SCLKs
0=Drive for 10MCLKs
1=20MCLKS
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-101
VIP/I2C Registers
DC_I2C_DDC2_CLK_DRIVE_EN
7
0x0
DC_I2C_DDC2_INTRA_BYTE_DELAY
15:8
0x0
DC_I2C_DDC2_INTRA_TRANSACTION_
DELAY
DC_I2C_DDC2_TIME_LIMIT
23:16
0x0
31:24
0x0
Select whether SCL pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SCL high
0=Pullup by external resistor
1=I2C pads drive SCL
Use to specify delay between bytes in units of I2C
reference.
Use to specify delay between transactions in units of I2C
reference.
Time limit, in units of 256 I2C fast reference (TOCLK)
pulses, to wait before timeout when clock is stalled by
external device.
DDC2 SETUP
DC_I2C_DDC3_SPEED - RW - 32 bits - [GpuF0MMReg:0x7D5C]
Field Name
DC_I2C_DDC3_THRESHOLD
DC_I2C_DDC3_PRESCALE
Bits
1:0
Default
0x2
31:16
0x0
DDC2 speed setting
Description
Select threshold to use to determine whether value
sampled on SDA is a 1 or 0. Specified in terms of the ratio
between the number of sampled ones and the total number
of times SDA is sampled.
0=>0
1=1/4 of total samples
2=1/2 of total samples
3=3/4 of total samples
prescale = (m * xtal_frequency) / (desired_i2c_speed),
where m is multiply factor, default: m = 1
DC_I2C_DDC3_SETUP - RW - 32 bits - [GpuF0MMReg:0x7D60]
Field Name
DC_I2C_DDC3_DATA_DRIVE_EN
Bits
0
Default
0x0
DC_I2C_DDC3_DATA_DRIVE_SEL
1
0x0
DC_I2C_DDC3_CLK_DRIVE_EN
7
0x0
DC_I2C_DDC3_INTRA_BYTE_DELAY
15:8
0x0
DC_I2C_DDC3_INTRA_TRANSACTION_
DELAY
DC_I2C_DDC3_TIME_LIMIT
23:16
0x0
31:24
0x0
DDC3 SETUP
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-102
Description
Select whether SDA pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SDA high
0=Pullup by external resistor
1=I2C pads drive SDA
Select number of clocks to drive SDA high
0:Drive for 10 SCLKs
1:Drive for 20 SCLKs
0=Drive for 10MCLKs
1=20MCLKS
Select whether SCL pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SCL high
0=Pullup by external resistor
1=I2C pads drive SCL
Use to specify delay between bytes in units of I2C
reference.
Use to specify delay between transactions in units of I2C
reference.
Time limit, in units of 256 I2C fast reference (TOCLK)
pulses, to wait before timeout when clock is stalled by
external device.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
DC_I2C_TRANSACTION0 - RW - 32 bits - [GpuF0MMReg:0x7D64]
Bits
0
Default
0x0
DC_I2C_STOP_ON_NACK0
8
0x0
DC_I2C_ACK_ON_READ0
9
0x0
DC_I2C_START0
12
0x0
DC_I2C_STOP0
13
0x0
23:16
0x0
DC_I2C_RW0
Field Name
DC_I2C_COUNT0
Configuration for first transaction
Description
Read/write indicator for first transaction - set to 0 for write, 1
for read. This bit only controls DC_I2C behaviour - the R/W
bit in the transaction is programmed into the I2C buffer as
the LSB of the address byte.
0=WRITE
1=READ
Determines whether the current transfer will stop if a NACK
is received during the first transaction (current transaction
always stops).
0=STOP CURRENT TRANSACTION, GO TO NEXT
TRANSACTION
1=STOP ALL TRANSACTIONS, SEND STOP BIT
Determines whether hardware will send an ACK after the
last byte on a read in the first transaction.
0=Send NACK
1=Send ACK
Determines whether a start bit will be sent before the first
transaction
0=NO START
1=START
Determines whether a stop bit will be sent after the first
transaction
0=NO STOP
1=STOP
Byte count for first transaction (excluding the first byte,
which is usually the address).
DC_I2C_TRANSACTION1 - RW - 32 bits - [GpuF0MMReg:0x7D68]
Field Name
Bits
0
Default
0x0
DC_I2C_STOP_ON_NACK1
8
0x0
DC_I2C_ACK_ON_READ1
9
0x0
DC_I2C_START1
12
0x0
DC_I2C_RW1
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Read/write indicator for second transaction - set to 0 for
write, 1 for read. This bit only controls DC_I2C behaviour the R/W bit in the transaction is programmed into the I2C
buffer as the LSB of the address byte.
0=WRITE
1=READ
Determines whether the current transfer will stop if a NACK
is received during the second transaction (current
transaction always stops).
0=STOP CURRENT TRANSACTION, GO TO NEXT
TRANSACTION
1=STOP ALL TRANSACTIONS, SEND STOP BIT
Determines whether hardware will send an ACK after the
last byte on a read in the second transaction.
0=Send NACK
1=Send ACK
Determines whether a start bit will be sent before the
second transaction
0=NO START
1=START
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-103
VIP/I2C Registers
DC_I2C_STOP1
DC_I2C_COUNT1
13
0x0
23:16
0x0
Configuration for second transaction
Determines whether a stop bit will be sent after the second
transaction
0=NO STOP
1=STOP
Byte count for second transaction (excluding the first byte,
which is usually the address).
DC_I2C_TRANSACTION2 - RW - 32 bits - [GpuF0MMReg:0x7D6C]
Bits
0
Default
0x0
DC_I2C_STOP_ON_NACK2
8
0x0
DC_I2C_ACK_ON_READ2
9
0x0
DC_I2C_START2
12
0x0
DC_I2C_STOP2
13
0x0
23:16
0x0
DC_I2C_RW2
Field Name
DC_I2C_COUNT2
Configuration for third transaction
Description
Read/write indicator for third transaction - set to 0 for write,
1 for read. This bit only controls DC_I2C behaviour - the
R/W bit in the transaction is programmed into the I2C buffer
as the LSB of the address byte.
0=WRITE
1=READ
Determines whether the current transfer will stop if a NACK
is received during the third transaction (current transaction
always stops).
0=STOP CURRENT TRANSACTION, GO TO NEXT
TRANSACTION
1=STOP ALL TRANSACTIONS, SEND STOP BIT
Determines whether hardware will send an ACK after the
last byte on a read in the third transaction.
0=Send NACK
1=Send ACK
Determines whether a start bit will be sent before the third
transaction
0=NO START
1=START
Determines whether a stop bit will be sent after the third
transaction
0=NO STOP
1=STOP
Byte count for third transaction (excluding the first byte,
which is usually the address).
DC_I2C_TRANSACTION3 - RW - 32 bits - [GpuF0MMReg:0x7D70]
Field Name
DC_I2C_RW3
DC_I2C_STOP_ON_NACK3
Bits
0
Default
0x0
8
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-104
Description
Read/write indicator for fourth transaction - set to 0 for write,
1 for read. This bit only controls DC_I2C behaviour - the
R/W bit in the transaction is programmed into the I2C buffer
as the LSB of the address byte.
0=WRITE
1=READ
Determines whether the current transfer will stop if a NACK
is received during the fourth transaction (current transaction
always stops).
0=STOP CURRENT TRANSACTION, GO TO NEXT
TRANSACTION
1=STOP ALL TRANSACTIONS, SEND STOP BIT
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
DC_I2C_ACK_ON_READ3
9
0x0
DC_I2C_START3
12
0x0
DC_I2C_STOP3
13
0x0
23:16
0x0
DC_I2C_COUNT3
Determines whether hardware will send an ACK after the
last byte on a read in the fourth transaction.
0=Send NACK
1=Send ACK
Determines whether a start bit will be sent before the fourth
transaction
0=NO START
1=START
Determines whether a stop bit will be sent after the fourth
transaction
0=NO STOP
1=STOP
Byte count for fourth transaction (excluding the first byte,
which is usually the address).
Configuration for fourth transaction
DC_I2C_DATA - RW - 32 bits - [GpuF0MMReg:0x7D74]
Field Name
DC_I2C_DATA_RW
DC_I2C_DATA
DC_I2C_INDEX
DC_I2C_INDEX_WRITE (W)
Bits
0
Default
0x0
15:8
23:16
0x0
0x0
31
0x0
This register is used to read or write the I2C buffer
Description
Select whether buffer access will be a read or write. For
writes, address auto-increments on write to DC_I2C_DATA.
For reads, address auto-increments on reads to
DC_I2C_DATA.
0=Write
1=Read
Use to fill or read the I2C buffer
Use to set index into I2C buffer for next read or current
write, or to read index of current read or next write. Writable
only when DC_I2C_INDEX_WRITE=1.
To write index field, set this bit to 1 while writing
DC_I2C_DATA.
GENERIC_I2C_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D80]
Field Name
GENERIC_I2C_GO (W)
GENERIC_I2C_SOFT_RESET
GENERIC_I2C_SEND_RESET
Bits
0
1
2
Default
0x0
0x0
0x0
Description
Write 1 to start I2C transfer
Write 1 to reset I2C controller
Set to 1 to send reset sequence (9 clocks with no data) at
start of transfer. This sequence is sent after DC_I2C_GO is
written to 1
generic i2c control register
GENERIC_I2C_INTERRUPT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D84]
Field Name
GENERIC_I2C_DONE_INT (R)
GENERIC_I2C_DONE_ACK (W)
GENERIC_I2C_DONE_MASK
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
1
Default
0x0
0x0
2
0x0
Description
GENERIC_I2C_DONE interrupt status
Acknowledge bit for GENERIC_I2C_DONE. Write 1 to
clear interrupt.
Mask bit for GENERIC_I2C_DONE. Set to 1 to enable
interrupt.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-105
VIP/I2C Registers
generic i2c interrupt control register
GENERIC_I2C_STATUS - RW - 32 bits - [GpuF0MMReg:0x7D88]
Field Name
GENERIC_I2C_STATUS (R)
Bits
3:0
Default
0x0
GENERIC_I2C_DONE (R)
4
0x0
GENERIC_I2C_ABORTED (R)
5
0x0
GENERIC_I2C_TIMEOUT (R)
6
0x0
GENERIC_I2C_STOPPED_ON_NACK
(R)
GENERIC_I2C_NACK (R)
9
0x0
10
0x0
Description
Status of the i2c internal state code: 0: idle, 1: sending start,
2: sending address, 3: transmitting/receiving data, 4:
transmitting/receiving ack 5: sending stop, 6:N/A, 7:byte
delay, 8: wait for GO command
Indicates the completion of i2c transfer. Cleared by writing
GENERIC_I2C_DONE_ACK or GO
Indicates that abort request ccurred during i2c transfer,
stopping transfer. Cleared on GO.
Indicates that timeout condition occurred during SW
transfer, stopping transfer. Cleared on GO.
Indicates that SW transfer was interrpted due to NACK
when STOP_ON_NACK=1. Cleared on GO.
Indicates that I2C slave did not issue an acknowledge
during the i2c transaction. Cleared on GO.
generic i2c read only status register
GENERIC_I2C_SPEED - RW - 32 bits - [GpuF0MMReg:0x7D8C]
Field Name
GENERIC_I2C_THRESHOLD
GENERIC_I2C_PRESCALE
Bits
1:0
Default
0x2
31:16
0x0
Description
Select threshold to use to determine whether value
sampled on SDA is a 1 or 0 when SCL is hi. 0: begining of
SCL(hi), 1: 1/4 of SCL(hi),2: 1/2 of SCL(hi),3: 3/4 of SCL(hi)
0=>0
1=1/4 of total samples
2=1/2 of total samples
3=3/4 of total samples
prescale = (m * xtal_frequency) / (4 * desired_i2c_speed),
where m is multiply factor, default: m = 1
Generic i2c bus config
GENERIC_I2C_SETUP - RW - 32 bits - [GpuF0MMReg:0x7D90]
Field Name
GENERIC_I2C_DATA_DRIVE_EN
Bits
0
Default
0x0
GENERIC_I2C_DATA_DRIVE_SEL
1
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-106
Description
Select whether SDA pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SDA high
0=Pullup by external resistor
1=I2C pads drive SDA
Select number of clocks to drive SDA high
0:Drive for 10 SCLKs
1:Drive for 20 SCLKs
0=Drive for 10MCLKs
1=20MCLKS
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
GENERIC_I2C_CLK_DRIVE_EN
7
0x0
GENERIC_I2C_INTRA_BYTE_DELAY
15:8
0x0
GENERIC_I2C_TIME_LIMIT
31:24
0x0
Generic i2c bus config
Select whether SCL pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SCL high
0=Pullup by external resistor
1=I2C pads drive SCL
Use to specify delay between bytes in units of I2C
reference.
Time limit, in units of 256 I2C fast reference (TOCLK)
pulses, to wait before timeout when clock is stalled by
external device.
GENERIC_I2C_TRANSACTION - RW - 32 bits - [GpuF0MMReg:0x7D94]
Field Name
GENERIC_I2C_RW
Bits
0
Default
0x0
GENERIC_I2C_STOP_ON_NACK
8
0x0
GENERIC_I2C_ACK_ON_READ
9
0x0
GENERIC_I2C_START
12
0x0
GENERIC_I2C_STOP
13
0x0
19:16
0x0
GENERIC_I2C_COUNT
generic i2c transaction setup register
Description
Read/write indicator for second transaction - set to 0 for
write, 1 for read. This bit only controls DC_I2C behaviour the R/W bit in the transaction is programmed into the I2C
buffer as the LSB of the address byte.
0=WRITE
1=READ
Determines whether the current transfer will stop if a NACK
is received during the transaction (current transaction
always stops).
0=STOP CURRENT TRANSACTION, GO TO NEXT
TRANSACTION
1=STOP ALL TRANSACTIONS, SEND STOP BIT
Determines whether hardware will send an ACK after the
last byte on a read in the second transaction.
0=Send NACK
1=Send ACK
Determines whether a start bit will be sent before the
second transaction
0=NO START
1=START
Determines whether a stop bit will be sent after the second
transaction
0=NO STOP
1=STOP
Byte count for the transaction (excluding the first byte,
which is usually the address).
GENERIC_I2C_DATA - RW - 32 bits - [GpuF0MMReg:0x7D98]
Field Name
GENERIC_I2C_DATA_RW
Bits
0
Default
0x0
GENERIC_I2C_DATA
15:8
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Select whether buffer access will be a read or write. For
writes, address auto-increments on write to DC_I2C_DATA.
For reads, address auto-increments on reads to
GENERIC_I2C_DATA.
0=Write
1=Read
Use to fill or read the generic I2C buffer
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-107
VIP/I2C Registers
GENERIC_I2C_INDEX
GENERIC_I2C_INDEX_WRITE (W)
19:16
0x0
31
0x0
This register is used to read or write the I2C buffer
Use to set index into I2C buffer for next read or current
write, or to read index of current read or next write. Writable
only when GENERIC_I2C_INDEX_WRITE=1.
To write index field, set this bit to 1 while writing
GENERIC_I2C_DATA
GENERIC_I2C_PIN_SELECTION - RW - 32 bits - [GpuF0MMReg:0x7D9C]
Field Name
GENERIC_I2C_SCL_PIN_SEL
Bits
6:0
Default
0x0
GENERIC_I2C_SDA_PIN_SEL
14:8
0x0
Pin selection register
Description
GPIO pin selection to use for SCL, if
GENERIC_I2C_SCL_PIN_SEL ==
GENERIC_I2C_SDA_PIN_SEL => disable pin selectin.
Refer to generic_i2c_programming guide for pin selection
details
GPIO pin selection to use for SDA, if
GENERIC_I2C_SCL_PIN_SEL ==
GENERIC_I2C_SDA_PIN_SEL => disable pin selectin.
Refer to generic_i2c_programming guide for pin selection
details
GENERIC_I2C_PIN_DEBUG - RW - 32 bits - [GpuF0MMReg:0x7DA0]
Field Name
GENERIC_I2C_SCL_OUTPUT
GENERIC_I2C_SCL_INPUT (R)
Bits
0
1
Default
0x0
0x0
Description
SCL pin output value when GENERIC_I2C_SCL_EN is set
SCL pin input value when SCL pin is not driving, i.e.
GENERIC_I2C_SCL_EN = 0
GENERIC_I2C_SCL_EN
2
0x0
SCL tri-state output control, set to one when SCL needs to
drive
GENERIC_I2C_SDA_OUTPUT
4
0x0
SDA pin output value when GENERIC_I2C_SDA_EN is set
GENERIC_I2C_SDA_INPUT (R)
5
0x0
SDA pin input value when SDA pin is not driving, i.e.
GENERIC_I2C_SCL_EN = 0
GENERIC_I2C_SDA_EN
6
0x0
SCL tri-state output control, set to one when SCL needs to
drive
Generic i2c pin debug register, allow software to control the selected pins directly
DC_I2C_DDC4_HW_STATUS - RW - 32 bits - [GpuF0MMReg:0x7DB0]
Field Name
DC_I2C_DDC4_HW_STATUS (R)
Bits
1:0
Default
0x0
DC_I2C_DDC4_HW_DONE (R)
3
0x0
DC_I2C_DDC4_HW_REQ (R)
16
0x0
DC_I2C_DDC4_HW_URG (R)
17
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-108
Description
Current HW status of DC_I2C
0=Idle
1=In use by HW
2=In use by HW
3=Reserved
Set on completion of HW transfer. Cleared by writing
DC_I2C_HW_DONE_ACK to 1
Hardware requests use of DC_I2C interface (indicates that
request is pending - i.e. queued). Cleared when request
becomes active or by DC_I2C_ABORT_HW_XFER.
Indicates that hardware I2C request is urgent (used by
arbitration logic).
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
Status fields for DC_I2C engine
DC_I2C_DDC4_SPEED - RW - 32 bits - [GpuF0MMReg:0x7DB4]
Field Name
DC_I2C_DDC4_THRESHOLD
DC_I2C_DDC4_PRESCALE
Bits
1:0
Default
0x2
31:16
0x0
DDC4 speed setting
Description
Select threshold to use to determine whether value
sampled on SDA is a 1 or 0. Specified in terms of the ratio
between the number of sampled ones and the total number
of times SDA is sampled.
0=>0
1=1/4 of total samples
2=1/2 of total samples
3=3/4 of total samples
prescale = (m * xtal_frequency) / (desired_i2c_speed),
where m is multiply factor, default: m = 1
DC_I2C_DDC4_SETUP - RW - 32 bits - [GpuF0MMReg:0x7DBC]
Field Name
DC_I2C_DDC4_DATA_DRIVE_EN
Bits
0
Default
0x0
DC_I2C_DDC4_DATA_DRIVE_SEL
1
0x0
DC_I2C_DDC4_CLK_DRIVE_EN
7
0x0
DC_I2C_DDC4_INTRA_BYTE_DELAY
15:8
0x0
DC_I2C_DDC4_INTRA_TRANSACTION_
DELAY
DC_I2C_DDC4_TIME_LIMIT
23:16
0x0
31:24
0x0
Description
Select whether SDA pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SDA high
0=Pullup by external resistor
1=I2C pads drive SDA
Select number of clocks to drive SDA high
0:Drive for 10 SCLKs
1:Drive for 20 SCLKs
0=Drive for 10MCLKs
1=20MCLKS
Select whether SCL pad is pulled up or driven high
0:Pullup by external resistor
1:I2C pads drive SCL high
0=Pullup by external resistor
1=I2C pads drive SCL
Use to specify delay between bytes in units of I2C
reference.
Use to specify delay between transactions in units of I2C
reference.
Time limit, in units of 256 I2C fast reference (TOCLK)
pulses, to wait before timeout when clock is stalled by
external device.
DDC4 SETUP
2.5.2
Video Interface Port Host Port Registers
VIPH_REG_ADDR - RW - 32 bits - [GpuF0MMReg:0xC80]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-109
VIP/I2C Registers
VIPH_REG_AD
15:0
0x0
Bits (11:0): Slave registers address. Bits(12): 0 = register
access, 1= FIFO access. Bits(13): 0= register write, 1 =
register read. Bits(15:14): Slave device ID.
VIP Host register access command and address.
VIPH_REG_DATA - RW - 32 bits - [GpuF0MMReg:0xC84]
Field Name
VIPH_REG_DT_R (R)
VIPH_REG_DT_W (W)
VIP Host Port register data port
Bits
31:0
31:0
Default
0x0
0x0
Description
Read from VIP Host Port register data port
Write to VIP Host Port register data port
VIPH_CH0_DATA - RW - 32 bits - [GpuF0MMReg:0xC00]
Field Name
VIPH_CH0_DT
VIPH0 data interface
Bits
31:0
Default
0x0
VIPH0 data interface
Description
VIPH_CH1_DATA - RW - 32 bits - [GpuF0MMReg:0xC04]
Field Name
VIPH_CH1_DT
VIPH0 data interface
Bits
31:0
Default
0x0
VIPH0 data interface
Description
VIPH_CH2_DATA - RW - 32 bits - [GpuF0MMReg:0xC08]
Field Name
VIPH_CH2_DT
VIPH0 data interface
Bits
31:0
Default
0x0
VIPH0 data interface
Description
VIPH_CH3_DATA - RW - 32 bits - [GpuF0MMReg:0xC0C]
Field Name
VIPH_CH3_DT
VIPH0 data interface
Bits
31:0
Default
0x0
VIPH0 data interface
Description
VIPH_CH0_ADDR - RW - 32 bits - [GpuF0MMReg:0xC10]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-110
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
VIPH_CH0_AD
7:0
0x0
Bit(3:0): FIFO address Bit(4): 0= register access, 1 = FIFO
access. Bit(5): 0= register write, 1= register read. Bits(7:6):
Slave device ID.
VIPH0 command + address.
VIPH_CH1_ADDR - RW - 32 bits - [GpuF0MMReg:0xC14]
Field Name
VIPH_CH1_AD
Bits
7:0
Default
0x0
VIPH1 command + address.
Description
Bit(3:0): FIFO address Bit(4): 0= register access, 1 = FIFO
access. Bit(5): 0= register write, 1= register read. Bits(7:6):
Slave device ID.
VIPH_CH2_ADDR - RW - 32 bits - [GpuF0MMReg:0xC18]
Field Name
VIPH_CH2_AD
Bits
7:0
Default
0x0
VIPH2 command + address.
Description
Bit(3:0): FIFO address Bit(4): 0= register access, 1 = FIFO
access. Bit(5): 0= register write, 1= register read. Bits(7:6):
Slave device ID.
VIPH_CH3_ADDR - RW - 32 bits - [GpuF0MMReg:0xC1C]
Field Name
VIPH_CH3_AD
Bits
7:0
Default
0x0
VIPH3 command + address.
Description
Bit(3:0): FIFO address Bit(4): 0= register access, 1 = FIFO
access. Bit(5): 0= register write, 1= register read. Bits(7:6):
Slave device ID.
VIPH_CH0_SBCNT - RW - 32 bits - [GpuF0MMReg:0xC20]
Field Name
VIPH_CH0_SCNT
Bits
19:0
Default
0x0
Byte count of transfer requested.
Description
Write non-zero byte count will trigger DMA. Maximum 2 jobs
can be loaded into the queue any one time.
VIPH_CH1_SBCNT - RW - 32 bits - [GpuF0MMReg:0xC24]
Field Name
VIPH_CH1_SCNT
Byte count of transfer requested.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
19:0
Default
0x0
Description
Write non-zero byte count will trigger DMA. Maximum 2 jobs
can be loaded into the queue any one time.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-111
VIP/I2C Registers
VIPH_CH2_SBCNT - RW - 32 bits - [GpuF0MMReg:0xC28]
Field Name
VIPH_CH2_SCNT
Bits
19:0
Default
0x0
Description
Write non-zero byte count will trigger DMA. Maximum 2 jobs
can be loaded into the queue any one time.
Byte count of transfer requested.
VIPH_CH3_SBCNT - RW - 32 bits - [GpuF0MMReg:0xC2C]
Field Name
VIPH_CH3_SCNT
Bits
19:0
Default
0x0
Description
Write non-zero byte count will trigger DMA. Maximum 2 jobs
can be loaded into the queue any one time.
Byte count of transfer requested.
VIPH_CH0_ABCNT - RW - 32 bits - [GpuF0MMReg:0xC30]
Field Name
VIPH_CH0_ACNT (R)
Read back of remaining byte count.
Bits
19:0
Default
0x0
Description
Keep track of active byte-count remaining.
VIPH_CH1_ABCNT - RW - 32 bits - [GpuF0MMReg:0xC34]
Field Name
VIPH_CH1_ACNT (R)
Read back of remaining byte count.
Bits
19:0
Default
0x0
Description
Keep track of active byte-count remaining.
VIPH_CH2_ABCNT - RW - 32 bits - [GpuF0MMReg:0xC38]
Field Name
VIPH_CH2_ACNT (R)
Read back of remaining byte count.
Bits
19:0
Default
0x0
Description
Keep track of active byte-count remaining.
VIPH_CH3_ABCNT - RW - 32 bits - [GpuF0MMReg:0xC3C]
Field Name
VIPH_CH3_ACNT (R)
Read back of remaining byte count.
Bits
19:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-112
Description
Keep track of active byte-count remaining.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
VIPH_CONTROL - RW - 32 bits - [GpuF0MMReg:0xC40]
Field Name
VIPH_CLK_SEL
Bits
7:0
Default
0x0
13
0x0
19:16
0x0
VIPH_DMA_MODE
VIPH_EN
VIP_DEVICE_DESKTOP (R)
20
21
22
0x0
0x0
0x0
VIP_DEVICE_MOBILE (R)
23
0x0
VIPH_DV0_WID
24
0x0
VIPH_DV1_WID
25
0x0
VIPH_DV2_WID
26
0x0
VIPH_DV3_WID
27
0x0
VIPH_PWR_DOWN (R)
28
0x0
VIPH_PWR_DOWN_AK (W)
28
0x0
VIPH_VIPCLK_DIS
29
0x0
VIPH_INT_SEL
30
0x0
VIP_DEVICE_STRAP_DIS (R)
31
0x0
VIPH_REG_RDY (R)
VIPH_MAX_WAIT
Description
VIPH clock select, only even divider is permitted. Which
means VIPH_CLK_SEL(0) must be set to 1.
0=reserved
1=reserved
2=reserved
3=xclkby4
4=reserved
5=xclkby6
6=... (Only EVEN divider is permitted
0= VIPH is ready for next register access. 1= VIPH is busy
for current VIPH register access.
Number of VIP phases before issuing time out. Set to zero
means no time out
0= No DMA. 1= DMA
VIP Host port Enable
0=VIP_DEVICE present, 1=No VIP device attached, valid
only with MOBILE_DIS=1 and
VIP_DEVICE_STRAP_DIS=0
0=VIP_DEVICE present, 1=No VIP device attached, valid
only with MOBILE_DIS=0 and
VIP_DEVICE_STRAP_DIS=0
VIPH0 bus width
0=2-bit vipbus
1=4-bit vipbus
VIPH1 bus width
0=2-bit vipbus
1=4-bit vipbus
VIPH2 bus width
0=2-bit vipbus
1=4-bit vipbus
VIPH3 bus width
0=2-bit vipbus
1=4-bit vipbus
'1' to wake up PCICLK.
0=Normal
1=STARTUP PCICLK
Clear PWR_DOWN by writing a 1. In order to support
PCICLK power down mode, it is important to clear this bit
every time there is an interrupt from any part of VIP
0=Normal
1=Allow the host bus to go back to power down state
'0' will supply VIP clock to slave. '1' will stops VIP clock to
save power.
0=
1=turn off VIPCLK for power saving
0=If VIP host port interrupt using input instead of polling,
then AUXWIN pin used as interrupt input.
1=If VIP host port interrupt using input instead of polling,
then I2C clock pin used as interrupt input.
0=VIP_DEVICE strap must be checked, 1=VIP_DEVICE
strap must be ignored
VIP Host Port Control
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-113
VIP/I2C Registers
VIPH_DV_LAT - RW - 32 bits - [GpuF0MMReg:0xC44]
Field Name
VIPH_TIME_UNIT
VIPH_DV0_LAT
VIPH_DV1_LAT
VIPH_DV2_LAT
VIPH_DV3_LAT
Time slice partition
Bits
11:0
19:16
23:20
27:24
31:28
Default
0x0
0x0
0x0
0x0
0x0
Description
Basic time slice
How many time slice port 0 gets
How many time slice port 1 gets
How many time slice port 2 gets
How many time slice port 3 gets
VIPH_DMA_CHUNK - RW - 32 bits - [GpuF0MMReg:0xC48]
Field Name
VIPH_CH0_CHUNK
VIPH_CH1_CHUNK
VIPH_CH2_CHUNK
VIPH_CH3_CHUNK
VIPH_CH0_ABORT
VIPH_CH1_ABORT
VIPH_CH2_ABORT
VIPH_CH3_ABORT
DMA transfer chunk size and abort control
Field Name
VIPH_DV0_INT_EN
VIPH_DV1_INT_EN
VIPH_DV2_INT_EN
VIPH_DV3_INT_EN
VIPH_DV0_INT (R)
VIPH_DV0_AK (W)
VIPH_DV1_INT (R)
VIPH_DV1_AK (W)
VIPH_DV2_INT (R)
VIPH_DV2_AK (W)
VIPH_DV3_INT (R)
VIPH_DV3_AK (W)
VIP Host port interrupt control
Bits
3:0
5:4
7:6
9:8
16
17
18
19
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
Chunk size between VIP host port and DMA for port 0
Chunk size between VIP host port and DMA for port 1
Chunk size between VIP host port and DMA for port 2
Chunk size between VIP host port and DMA for port 3
Abort DMA operation through port 0
Abort DMA operation through port 1
Abort DMA operation through port 2
Abort DMA operation through port 3
VIPH_DV_INT - RW - 32 bits - [GpuF0MMReg:0xC4C]
Bits
0
1
2
3
4
4
5
5
6
6
7
7
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
Interrupt polling enable for VIP slave device 0
Interrupt polling enable for VIP slave device 1
Interrupt polling enable for VIP slave device 2
Interrupt polling enable for VIP slave device 3
Interrupt
Clear interrupt with a '1'
Interrupt
Clear interrupt with a '1'
Interrupt
Clear interrupt with a '1'
Interrupt
Clear interrupt with a '1'
VIPH_TIMEOUT_STAT - RW - 32 bits - [GpuF0MMReg:0xC50]
Field Name
VIPH_FIFO0_STAT (R)
VIPH_FIFO0_AK (W)
VIPH_FIFO1_STAT (R)
VIPH_FIFO1_AK (W)
VIPH_FIFO2_STAT (R)
VIPH_FIFO2_AK (W)
VIPH_FIFO3_STAT (R)
VIPH_FIFO3_AK (W)
VIPH_REG_STAT (R)
VIPH_REG_AK (W)
Bits
0
0
1
1
2
2
3
3
4
4
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-114
Description
'1' if port 0 time out or hung.
Clear FIFO0_STAT with a '1'
'1' if port 1 time out or hung.
Clear FIFO1_STAT with a '1'
'1' if port 2 time out or hung.
Clear FIFO2_STAT with a '1'
'1' if port 3 time out or hung.
Clear FIFO3_STAT with a '1'
'1' if register port time out or hung.
Clear REG_STAT with a '1'
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
VIPH_AUTO_INT_STAT (R)
VIPH_AUTO_INT_AK (W)
VIPH_FIFO0_MASK
VIPH_FIFO1_MASK
VIPH_FIFO2_MASK
VIPH_FIFO3_MASK
VIPH_REG_MASK
VIPH_AUTO_INT_MASK
VIPH_DV0_INT_MASK
VIPH_DV1_INT_MASK
VIPH_DV2_INT_MASK
VIPH_DV3_INT_MASK
VIPH_INTPIN_EN
5
5
8
9
10
11
12
13
16
17
18
19
20
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
0x0
VIPH_INTPIN_INT (R)
VIPH_REGR_DIS
21
24
0x0
0x0
VIP_RBBMIF_RDWR_TIMEOUT_DIS
31
0x0
VIP Host Port Time Out Status
2.5.3
'1' if auto interrupt polling time out or hung.
Clear AUTO_INT_STAT with a '1'
'0' disable interrupt.
'0' disable interrupt.
'0' disable interrupt.
'0' disable interrupt.
'0' disable interrupt.
'0' disable interrupt.
'0' disable interrupt.
'0' disable interrupt.
'0' disable interrupt.
'0' disable interrupt.
'0' means no physical pins used for VIP interrupt. 1=
physical pins used.
'1' if physical pins has interrupt.
'0'= any host read from VIPH_REG_DATA will trigger VIP
register cycle. 1= Read from VIPH_REG_DATA will not
trigger VIP register cycle.
This bit is unused because VIP doesn't have its own
decode.
'0'= enable RBBMIF read/write timeout logic. 1= disable
RBBMIF read/write timeout logic.
Capture Registers
VID_BUFFER_CONTROL - RW - 32 bits - [GpuF0MMReg:0xB00]
Field Name
CAP0_BUFFER_WATER_MARK
FULL_BUFFER_EN
Bits
9:0
16
Default
0x10
0x0
CAP0_ANC_VBI_QUAD_BUF
17
0x0
VID_BUFFER_RESET
20
0x0
22:21
24
0x0
0x0
31
0x1
CAP_SWAP
CAP0_BUFFER_EMPTY (R)
CAP_URGENT_EN
Video Capture port buffer control.
Description
Capture 0 buffer water mark.
1= The shared buffer is dedicated to one capture only.
0=DISABLE
1=ENABLE
0=Dual buffer
1=Quaduple buffer
Reset the buffer pointers.
0=NOT RESET
1=RESET
Capture Port Swap control.
Capture 0's buffer empty status.
0=EMPTY
1=NOT EMPTY
Enable urgent signal to MH when water mark is reached.
CAP_INT_CNTL - RW - 32 bits - [GpuF0MMReg:0xB08]
Field Name
CAP0_BUF0_INT_EN
CAP0_BUF0_EVEN_INT_EN
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
1
0x0
Description
Capture 0 Buffer 0 Interrupt enable.
0=Disable
1=Enable
Capture 0 Buffer 0 even frame Interrupt enable.
0=Disable
1=Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-115
VIP/I2C Registers
CAP0_BUF1_INT_EN
2
0x0
CAP0_BUF1_EVEN_INT_EN
3
0x0
CAP0_VBI0_INT_EN
4
0x0
CAP0_VBI1_INT_EN
5
0x0
CAP0_ONESHOT_INT_EN
6
0x0
CAP0_ANC0_INT_EN
7
0x0
CAP0_ANC1_INT_EN
8
0x0
CAP0_VBI2_INT_EN
9
0x0
CAP0_VBI3_INT_EN
10
0x0
CAP0_ANC2_INT_EN
11
0x0
CAP0_ANC3_INT_EN
12
0x0
CAP0_BUF_INT_MUX
13
0x0
Video Capture port interrupt control register
Capture 0 Buffer 1 Interrupt enable.
0=Disable
1=Enable
Capture 0 Buffer 1 even frame Interrupt enable.
0=Disable
1=Enable
Capture 0 VBI Buffer 0 Interrupt enable.
0=Disable
1=Enable
Capture 0 VBI Buffer 1 Interrupt enable.
0=Disable
1=Enable
Capture 0 ONESHOT Buffer Interrupt enable.
0=Disable
1=Enable
Capture 0 ANC Buffer 0 Interrupt enable.
0=Disable
1=Enable
Capture 0 ANC Buffer 1 Interrupt enable.
0=Disable
1=Enable
Capture 0 VBI Buffer 2 Interrupt enable.
0=Disable
1=Enable
Capture 0 VBI Buffer 3 Interrupt enable.
0=Disable
1=Enable
Capture 0 ANC Buffer 2 Interrupt enable.
0=Disable
1=Enable
Capture 0 ANC Buffer 3 Interrupt enable.
0=Disable
1=Enable
Wait for MH ack before setting capture interrupt.
0=Disable
1=Enable
CAP_INT_STATUS - RW - 32 bits - [GpuF0MMReg:0xB0C]
Field Name
CAP0_BUF0_INT (R)
Bits
0
Default
0x0
CAP0_BUF0_INT_AK (W)
0
0x0
CAP0_BUF0_EVEN_INT (R)
1
0x0
CAP0_BUF0_EVEN_INT_AK (W)
1
0x0
CAP0_BUF1_INT (R)
2
0x0
CAP0_BUF1_INT_AK (W)
2
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-116
Description
Read only. Buffer 0 interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
Buf0 interrupt acknowledgment.
0=No effect
1=Clear status
Read only. Buffer 0 even frame interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
Buf0 even frame buffer interrupt acknowledgment.
0=No effect
1=Clear status
Read only. Buffer 1 interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
Buf1 interrupt acknowledgment.
0=No effect
1=Clear status
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
CAP0_BUF1_EVEN_INT (R)
3
0x0
CAP0_BUF1_EVEN_INT_AK (W)
3
0x0
CAP0_VBI0_INT (R)
4
0x0
CAP0_VBI0_INT_AK (W)
4
0x0
CAP0_VBI1_INT (R)
5
0x0
CAP0_VBI1_INT_AK (W)
5
0x0
CAP0_ONESHOT_INT (R)
6
0x0
CAP0_ONESHOT_INT_AK (W)
6
0x0
CAP0_ANC0_INT (R)
7
0x0
CAP0_ANC0_INT_AK (W)
7
0x0
CAP0_ANC1_INT (R)
8
0x0
CAP0_ANC1_INT_AK (W)
8
0x0
CAP0_VBI2_INT (R)
9
0x0
CAP0_VBI2_INT_AK (W)
9
0x0
CAP0_VBI3_INT (R)
10
0x0
CAP0_VBI3_INT_AK (W)
10
0x0
CAP0_ANC2_INT (R)
11
0x0
CAP0_ANC2_INT_AK (W)
11
0x0
CAP0_ANC3_INT (R)
12
0x0
CAP0_ANC3_INT_AK (W)
12
0x0
Capture port interrupt control.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Read only. Buffer 1 even frame interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
Buf1 even frame buffer interrupt acknowledgment.
0=No effect
1=Clear status
Read only. VBI buffer 0 interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
VBI buffer 0 interrupt acknowledgment.
0=No effect
1=Clear status
Read only. VBI buffer 1 interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
VBI buffer 1 interrupt acknowledgment.
0=No effect
1=Clear status
Read only. ONESHOT buffer interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
ONESHOT buffer interrupt acknowledgment.
0=No effect
1=Clear status
Read only. ANC buffer 0 interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
ANC buffer 0 interrupt acknowledgment.
0=No effect
1=Clear status
Read only. ANC buffer 1 nterrupt status.
0=No event
1=Event has occurred, interrupting if enabled
ANC buffer 1 interrupt acknowledgment.
0=No effect
1=Clear status
Read only. VBI buffer 2 interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
VBI buffer 2 interrupt acknowledgment.
0=No effect
1=Clear status
Read only. VBI buffer 3 interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
VBI buffer 3 interrupt acknowledgment.
0=No effect
1=Clear status
Read only. ANC buffer 2 interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
ANC buffer 2 interrupt acknowledgment.
0=No effect
1=Clear status
Read only. ANC buffer 3 interrupt status.
0=No event
1=Event has occurred, interrupting if enabled
ANC buffer 3 interrupt acknowledgment.
0=No effect
1=Clear status
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-117
VIP/I2C Registers
CAP0_BUF0_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB20]
Field Name
CAP_BUF0_OFFSET
Bits
31:0
Default
0x0
Description
Capture Port 0 Buffer 0 starting address
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture Port 0 Buffer 0 starting address
CAP0_BUF1_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB24]
Field Name
CAP_BUF1_OFFSET
Bits
31:0
Default
0x0
Description
Capture Port 0 Buffer 1 starting address
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture Port 0 Buffer 1 starting address
CAP0_BUF0_EVEN_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB28]
Field Name
CAP_BUF0_EVEN_OFFSET
Bits
31:0
Default
0x0
Description
Capture Port 0 Buffer 0 even frame starting address
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture Port 0 Buffer 0 even frame starting address
CAP0_BUF1_EVEN_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB2C]
Field Name
CAP_BUF1_EVEN_OFFSET
Bits
31:0
Default
0x0
Description
Capture Port 0 Buffer 1 even frame starting address
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture Port 0 Buffer 1 even frame starting address
CAP0_BUF_PITCH - RW - 32 bits - [GpuF0MMReg:0xB30]
Field Name
CAP_BUF_PITCH
Bits
11:0
Default
0x0
Capture 0 buffer's pitch.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-118
Description
Capture 0 buffer's pitch.
NOTE: Bits 0:1 of this field are hardwired to ZERO.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
CAP0_V_WINDOW - RW - 32 bits - [GpuF0MMReg:0xB34]
Field Name
CAP_V_START
CAP_V_END
Capture 0's Vertical window.
Bits
11:0
27:16
Default
0x0
0x0
Description
Vertical window starting line number.
Vertical window end line number.
CAP0_H_WINDOW - RW - 32 bits - [GpuF0MMReg:0xB38]
Field Name
CAP_H_START
CAP_H_WIDTH
Bits
11:0
27:16
Default
0x0
0x0
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0's Horizontal window.
Field Name
CAP_VBI0_OFFSET
CAP0_VBI0_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB3C]
Bits
31:0
Default
0x0
Description
Capture 0 VBI 0 buffer's starting address.
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0 VBI 0 buffer's starting address.
Field Name
CAP_VBI1_OFFSET
Description
Horizontal window's start.
Horizontal window's width.
CAP0_VBI1_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB40]
Bits
31:0
Default
0x0
Description
Capture 0 VBI 1 buffer's starting address.
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0 VBI 1 buffer's starting address.
CAP0_VBI_V_WINDOW - RW - 32 bits - [GpuF0MMReg:0xB44]
Field Name
CAP_VBI_V_START
CAP_VBI_V_END
Capture 0 VBI's vertical window
Bits
11:0
27:16
Default
0x0
0x0
Description
Capture 0 VBI's Vertical start.
Capture 0 VBI's Vertical End.
CAP0_VBI_H_WINDOW - RW - 32 bits - [GpuF0MMReg:0xB48]
Field Name
CAP_VBI_H_START
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
11:0
Default
0x0
Description
Capture 0 VBI's Horizontal start.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-119
VIP/I2C Registers
CAP_VBI_H_WIDTH
27:16
0x0
Capture 0 VBI's Horizontal Width.
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0 VBI's horizontal window
CAP0_PORT_MODE_CNTL - RW - 32 bits - [GpuF0MMReg:0xB4C]
Field Name
CAP_PORT_WIDTH
Bits
1
Default
0x0
CAP_PORT_BYTE_USED
2
0x0
CAP_DDR_MODE
3
0x0
CAP_DDR_SYNC
4
0x0
MOBILE_DIS
5
0x1
Description
Capture 0 port width.
0=8 bits
1=16 bits
In 8 bit width mode, which byte used.
0=lower byte used
1=upper byte used
Capture DDR mode.
0=DDR mode off
1=DDR mode on
Embedded sync words DDR mode.
0=Sync on rising edge
1=Sync on both edges
Mobile/Desktop configuration.
0=Mobile
1=Desktop
Capture 0 mode control register.
CAP0_TRIG_CNTL - RW - 32 bits - [GpuF0MMReg:0xB50]
Field Name
CAP_TRIGGER_R (R)
Bits
1:0
Default
0x0
CAP_TRIGGER_W (W)
0
0x0
CAP_EN
4
0x0
15:8
16
0x0
0x0
CAP_VSYNC_CNT (R)
CAP_VSYNC_CLR
Capture 0 trigger control.
Description
Read only. Capture status.
0=capture complete
1=capture pending
2=capture in progress
Write only. Start capture next frame.
0=no action
1=capture next field/frame
Capture 0 enable.
0=disable
1=enable
Read only. VSYNC counter.
Reset the VSYNC counter.
CAP0_DEBUG - RW - 32 bits - [GpuF0MMReg:0xB54]
Field Name
CAP_H_STATUS (R)
CAP_V_STATUS (R)
CAP_V_SYNC (R)
Capture 0 debug status register.
Bits
11:0
27:16
28
Default
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-120
Description
Capture 0 Horizontal status.
Capture 0 vertical status.
Capture 0 VSYNC status.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
CAP0_CONFIG - RW - 32 bits - [GpuF0MMReg:0xB58]
Field Name
CAP_INPUT_MODE
Bits
0
Default
0x0
CAP_START_FIELD
1
0x0
CAP_START_BUF_R (R)
2
0x0
CAP_START_BUF_W (W)
3
0x0
5:4
0x0
6
0x0
CAP_BUF_MODE
8:7
0x0
CAP_MIRROR_EN
9
0x0
CAP_ONESHOT_MIRROR_EN
10
0x0
CAP_VIDEO_SIGNED_UV
11
0x0
CAP_ANC_DECODE_EN
12
0x0
CAP_VBI_EN
13
0x0
CAP_SOFT_PULL_DOWN_EN
14
0x0
CAP_VIP_EXTEND_FLAG_EN
15
0x0
CAP_FAKE_FIELD_EN
16
0x1
CAP_FIELD_START_LINE_DIFF
18:17
0x0
CAP_HORZ_DOWN
20:19
0x0
CAP_VERT_DOWN
22:21
0x0
CAP_BUF_TYPE
CAP_ONESHOT_MODE
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Input mode.
0=OneShot trigger mode
1=Enable continuous capture
Starting field.
0=Odd
1=Even
Read only. Current starting buffer.
0=Buffer 0
1=Buffer 1
Write only. Control starting buffer.
0=Buffer 0
1=Buffer 1
Buffer type.
0=Field
1=Alternating
2=Frame
ONESHOT mode.
0=FIELD
1=FRAME
Capture 0 buffer mode.
0=Single
1=Double
2=Triple
Capture 0 mirroring function enable.
0=Normal
1=Mirror
ONESHOT buffer mirroring function enable.
0=Normal
1=Mirror
Enable conversion to signed value.
1=Convert to signed
ANC enable.
0=disable
1=enable
VBI enable.
0=disable
1=enable
Software pull down enable.
0=disable
1=enable
Extended flag enable.
0=DISABLE
1=ENABLE
Fake field enable.
0=DISABLE
1=ENABLE
Odd, Even frame line number differences.
0=EQUAL
1=ODD_ONE_MORE_LINE
2=EVEN_ONE_MORE_LINE
Horizontal decimation.
0=Normal
1=x2
2=x4
Vertical decimation.
0=Normal
1=x2
2=x4
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-121
VIP/I2C Registers
CAP_STREAM_FORMAT
25:23
0x0
CAP_HDWNS_DEC
26
0x1
CAP_IMAGE_FLIP_EN
27
0x0
CAP_ONESHOT_IMAGE_FLIP_EN
28
0x0
CAP_VIDEO_IN_FORMAT
29
0x0
31:30
0x0
VBI_HORZ_DOWN
Capture 0 configuration register.
Video stream format.
0=Brooktree
1=CCIR 656
2=ZV
3=16bit VIP
4=TRANSPORT STREAM
Horizontal downscaler or decimator.
0=downscaler
1=decimator
0=Normal
1=Flip
0=Normal
1=Flip
Input format.
0=YVYU422
1=VYUY422
0=Normal
1=x2
2=x4
CAP0_ANC0_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB5C]
Field Name
CAP_ANC0_OFFSET
Bits
31:0
Default
0x0
Starting address
Description
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0 ANC 0 starting address.
CAP0_ANC1_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB60]
Field Name
CAP_ANC1_OFFSET
Bits
31:0
Default
0x0
Starting address
Description
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0 ANC 1 starting address.
CAP0_ANC_H_WINDOW - RW - 32 bits - [GpuF0MMReg:0xB64]
Field Name
CAP_ANC_WIDTH
Bits
11:0
Default
0x0
Window width.
Description
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0 ANC horizontal window.
CAP0_VIDEO_SYNC_TEST - RW - 32 bits - [GpuF0MMReg:0xB68]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-122
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
CAP_TEST_VID_SOF
CAP_TEST_VID_EOF
CAP_TEST_VID_EOL
CAP_TEST_VID_FIELD
0
1
2
3
0x0
0x0
0x0
0x0
CAP_TEST_SYNC_EN
5
0x0
Capture port 0 sync test.
Start of field.
End of field.
End of line.
Odd/Even field.
0=Even Field
1=Odd Field
Test sync enable.
0=Normal
1=Test Mode
CAP0_ONESHOT_BUF_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB6C]
Field Name
CAP_ONESHOT_BUF_OFFSET
Bits
31:0
Default
0x0
Description
ONESHOT buffer starting address.
NOTE: Bits 0:1 of this field are hardwired to ZERO.
ONESHOT buffer starting address.
CAP0_BUF_STATUS - RW - 32 bits - [GpuF0MMReg:0xB70]
Field Name
CAP_PRE_VID_BUF (R)
CAP_CUR_VID_BUF (R)
CAP_PRE_FIELD (R)
CAP_CUR_FIELD (R)
CAP_PRE_VBI_BUF (R)
CAP_CUR_VBI_BUF (R)
CAP_VBI_BUF_STATUS (R)
Bits
1:0
3:2
4
5
7:6
9:8
10
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
CAP_PRE_ANC_BUF (R)
CAP_CUR_ANC_BUF (R)
CAP_ANC_BUF_STATUS (R)
12:11
14:13
15
0x0
0x0
0x0
CAP_ANC_PRE_BUF_CNT (R)
CAP_VIP_INC (R)
27:16
28
0x0
0x0
CAP_VIP_PRE_REPEAT_FIELD (R)
29
0x0
CAP_CAP_BUF_STATUS (R)
30
0x0
CAP_VIP_STATUS_STROBE (R)
31
0x0
Capture 0 buffer status.
Description
Read only. Previous capture buffer.
Read only. Current Capture buffer.
Read only. Previous field.
Read only. Current field.
Read only. Previous VBI buffer.
Read only. Current VBI buffer.
Read only. VBI busy status.
0=done
1=busy
Read only. Previous ANC buffer.
Read only. Current ANC buffer.
Read only. Buffer busy status.
0=done
1=busy
Read only. Buffer count.
Read only. Interlaced or not.
0=INTERLACED
1=NON_INTERLACED
Read only. Previous buffer is new/repeat field.
0=new_field
1=repeated_field
Read only. Capture buffer busy status.
0=done
1=busy
Read only. Status strobe changes polarity when there is a
buffer change.
CAP0_ANC_BUF01_BLOCK_CNT - RW - 32 bits - [GpuF0MMReg:0xB74]
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-123
VIP/I2C Registers
Field Name
CAP0_ANC_BUF0_BLOCK_CNT (R)
CAP0_ANC_BUF1_BLOCK_CNT (R)
Bits
11:0
27:16
Default
0x0
0x0
Description
CAP0_ANC_BUF23_BLOCK_CNT - RW - 32 bits - [GpuF0MMReg:0xB7C]
Field Name
CAP0_ANC_BUF2_BLOCK_CNT (R)
CAP0_ANC_BUF3_BLOCK_CNT (R)
Bits
11:0
27:16
Default
0x0
0x0
Description
CAP0_VBI2_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB80]
Field Name
CAP_VBI2_OFFSET
Bits
31:0
Default
0x0
Description
Capture 0 VBI 2 buffer's starting address.
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0 VBI 2 buffer's starting address.
CAP0_VBI3_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB84]
Field Name
CAP_VBI3_OFFSET
Bits
31:0
Default
0x0
Description
Capture 0 VBI 3 buffer's starting address.
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0 VBI 3 buffer's starting address.
CAP0_ANC2_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB88]
Field Name
CAP_ANC2_OFFSET
Bits
31:0
Default
0x0
Starting address
Description
NOTE: Bits 0:1 of this field are hardwired to ZERO.
Capture 0 ANC 2 starting address.
CAP0_ANC3_OFFSET - RW - 32 bits - [GpuF0MMReg:0xB8C]
Field Name
CAP_ANC3_OFFSET
Bits
31:0
Default
0x0
Capture 0 ANC 3 starting address.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-124
Starting address
Description
NOTE: Bits 0:1 of this field are hardwired to ZERO.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
2.5.4
VIP Host Port DMA Registers
DMA_VIPH0_COMMAND - R - 32 bits - [GpuF0MMReg:0xA00]
Field Name
Bits
20:0
25:24
Default
0x0
0x0
TRANSFER_SOURCE
26
0x0
TRANSFER_DEST
27
0x0
SOURCE_OFFSET_HOLD
28
0x0
DEST_OFFSET_HOLD
29
0x0
INTERRUPT_DIS
30
0x0
END_OF_LIST_STATUS
31
0x0
BYTE_COUNT
SWAP_CONTROL
VIPH channel0 DMA command read back.
Description
Byte Count of transfer size.
Endian's swap control.
0=No Swapping
1=[15:0]=[31:16], [31:16]=[15:0]
2=[7:0]=[31:24], [15:8]=[23:16], [23:16]=[15:8],
[31:24]=[7:0]
3=Undefined
Address space of source data.
0=Transfer from memory
1=Transfer from VIPH
Address space of destination data.
0=Transfer to memory
1=Transfer to VIPH
Hold the source address without increase.
0=Increment
1=Hold
Hold the destination address without increase.
0=Increment
1=Hold
End of DMA command table interrupt control.
0=Normal
1=Disable the end of list interrupt
Status bit show the last command of the DMA table.
0=Normal
1=End of Descriptor List
DMA_VIPH1_COMMAND - R - 32 bits - [GpuF0MMReg:0xA04]
Field Name
Bits
20:0
25:24
Default
0x0
0x0
TRANSFER_SOURCE
26
0x0
TRANSFER_DEST
27
0x0
SOURCE_OFFSET_HOLD
28
0x0
BYTE_COUNT
SWAP_CONTROL
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Byte Count of transfer size.
Endian's swap control.
0=No Swapping
1=[15:0]=[31:16], [31:16]=[15:0]
2=[7:0]=[31:24], [15:8]=[23:16], [23:16]=[15:8],
[31:24]=[7:0]
3=Undefined
Address space of source data.
0=Transfer from memory
1=Transfer from VIPH
Address space of destination data.
0=Transfer to memory
1=Transfer to VIPH
Hold the source address without increase.
0=Increment
1=Hold
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-125
VIP/I2C Registers
DEST_OFFSET_HOLD
29
0x0
INTERRUPT_DIS
30
0x0
END_OF_LIST_STATUS
31
0x0
VIPH channel1 DMA command read back.
Hold the destination address without increase.
0=Increment
1=Hold
End of DMA command table interrupt control.
0=Normal
1=Disable the end of list interrupt
Status bit show the last command of the DMA table.
0=Normal
1=End of Descriptor List
DMA_VIPH2_COMMAND - R - 32 bits - [GpuF0MMReg:0xA08]
Field Name
Bits
20:0
25:24
Default
0x0
0x0
TRANSFER_SOURCE
26
0x0
TRANSFER_DEST
27
0x0
SOURCE_OFFSET_HOLD
28
0x0
DEST_OFFSET_HOLD
29
0x0
INTERRUPT_DIS
30
0x0
END_OF_LIST_STATUS
31
0x0
BYTE_COUNT
SWAP_CONTROL
VIPH channel2 DMA command read back.
Description
Byte Count of transfer size.
Endian's swap control.
0=No Swapping
1=[15:0]=[31:16], [31:16]=[15:0]
2=[7:0]=[31:24], [15:8]=[23:16], [23:16]=[15:8],
[31:24]=[7:0]
3=Undefined
Address space of source data.
0=Transfer from memory
1=Transfer from VIPH
Address space of destination data.
0=Transfer to memory
1=Transfer to VIPH
Hold the source address without increase.
0=Increment
1=Hold
Hold the destination address without increase.
0=Increment
1=Hold
End of DMA command table interrupt control.
0=Normal
1=Disable the end of list interrupt
Status bit show the last command of the DMA table.
0=Normal
1=End of Descriptor List
DMA_VIPH3_COMMAND - R - 32 bits - [GpuF0MMReg:0xA0C]
Field Name
BYTE_COUNT
SWAP_CONTROL
TRANSFER_SOURCE
Bits
20:0
25:24
Default
0x0
0x0
26
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-126
Description
Byte Count of transfer size.
Endian's swap control.
0=No Swapping
1=[15:0]=[31:16], [31:16]=[15:0]
2=[7:0]=[31:24], [15:8]=[23:16], [23:16]=[15:8],
[31:24]=[7:0]
3=Undefined
Address space of source data.
0=Transfer from memory
1=Transfer from VIPH
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
TRANSFER_DEST
27
0x0
SOURCE_OFFSET_HOLD
28
0x0
DEST_OFFSET_HOLD
29
0x0
INTERRUPT_DIS
30
0x0
END_OF_LIST_STATUS
31
0x0
VIPH channel3 DMA command read back.
Address space of destination data.
0=Transfer to memory
1=Transfer to VIPH
Hold the source address without increase.
0=Increment
1=Hold
Hold the destination address without increase.
0=Increment
1=Hold
End of DMA command table interrupt control.
0=Normal
1=Disable the end of list interrupt
Status bit show the last command of the DMA table.
0=Normal
1=End of Descriptor List
DMA_VIPH_STATUS - R - 32 bits - [GpuF0MMReg:0xA10]
Field Name
DMA_VIPH0_AVAIL
DMA_VIPH1_AVAIL
DMA_VIPH2_AVAIL
DMA_VIPH3_AVAIL
DMA_VIPH0_CURRENT
DMA_VIPH1_CURRENT
DMA_VIPH2_CURRENT
DMA_VIPH3_CURRENT
DMA_VIPH0_ACTIVE
Bits
3:0
7:4
11:8
15:12
17:16
19:18
21:20
23:22
24
Default
0x3
0x3
0x3
0x3
0x0
0x0
0x0
0x0
0x0
DMA_VIPH1_ACTIVE
25
0x0
DMA_VIPH2_ACTIVE
26
0x0
DMA_VIPH3_ACTIVE
27
0x0
VIP_RBBM_H0DMA_IDLE
28
0x0
VIP_RBBM_H1DMA_IDLE
29
0x0
VIP_RBBM_H2DMA_IDLE
30
0x0
VIP_RBBM_H3DMA_IDLE
31
0x0
VIPH DMA channels status register.
Description
VIPH DMA channel 0 available job queue number.
VIPH DMA channel 1 available job queue number.
VIPH DMA channel 2 available job queue number.
VIPH DMA channel 3 available job queue number.
VIPH DMA channel 0 current active job queue number
VIPH DMA channel 1 current active job queue number
VIPH DMA channel 2 current active job queue number
VIPH DMA channel 3 current active job queue number
VIPH DMA channel 0 active status.
0=All VIP0 queue transfers are all done
1=A VIP0 queue transfer is active
VIPH DMA channel 1 active status.
0=All VIP1 queue transfers are all done
1=A VIP1 queue transfer is active
VIPH DMA channel 2 active status.
0=All VIP2 queue transfers are all done
1=A VIP2 queue transfer is active
VIPH DMA channel 3 active status.
0=All VIP3 queue transfers are all done
1=A VIP3 queue transfer is active
0=VIP DMA channel 0 is busy
1=VIP DMA channel 0 is idle
0=VIP DMA channel 1 is busy
1=VIP DMA channel 1 is idle
0=VIP DMA channel 2 is busy
1=VIP DMA channel 2 is idle
0=VIP DMA channel 3 is busy
1=VIP DMA channel 3 is idle
DMA_VIPH_MISC_CNTL - RW - 32 bits - [GpuF0MMReg:0xA14]
Field Name
DMA_VIPH_READ_TIMER
DMA_VIPH_READ_TIMEOUT_TO_PRIO
RITY_EN
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
3:0
7
Default
0xf
0x0
Description
0=Disable
1=Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-127
VIP/I2C Registers
DMA_VIPH_READ_TIMEOUT_STATUS
(R)
DMA_VIPH_URGENT_EN
8
0x0
9
0x1
0=Normal
1=Timeout
0=Disable
1=Enable urgent to MH if read times out
DMA_VIPH_CHUNK_0 - RW - 32 bits - [GpuF0MMReg:0xA18]
Field Name
DMA_VIPH3_TABLE_SWAP
Bits
1:0
Default
0x0
DMA_VIPH2_TABLE_SWAP
3:2
0x0
DMA_VIPH1_TABLE_SWAP
5:4
0x0
DMA_VIPH0_TABLE_SWAP
7:6
0x0
DMA_VIPH3_NOCHUNK
28
0x0
DMA_VIPH2_NOCHUNK
29
0x0
DMA_VIPH1_NOCHUNK
30
0x0
DMA_VIPH0_NOCHUNK
31
0x0
Description
VIPH DMA Channel 3 Endian swap control.
0=No swap
1=8bit swap
2=16bit swap
3=reserved
VIPH DMA Channel 2 Endian swap control.
0=No swap
1=8bit swap
2=16bit swap
3=reserved
VIPH DMA Channel 1 Endian swap control.
0=No swap
1=8bit swap
2=16bit swap
3=reserved
VIPH DMA Channel 0 Endian swap control.
0=No swap
1=8bit swap
2=16bit swap
3=reserved
VIPH DMA Channel 3 disregard chunk size
0=Use chunk value
1=Use infinity for the chunk value
VIPH DMA Channel 2 disregard chunk size
0=Use chunk value
1=Use infinity for the chunk value
VIPH DMA Channel 1 disregard chunk size
0=Use chunk value
1=Use infinity for the chunk value
VIPH DMA Channel 0 disregard chunk size
0=Use chunk value
1=Use infinity for the chunk value
VIP Host Port DMA Chunk control register.
DMA_VIPH_CHUNK_1_VAL - RW - 32 bits - [GpuF0MMReg:0xA1C]
Field Name
DMA_VIP0_CHUNK
DMA_VIP1_CHUNK
DMA_VIP2_CHUNK
DMA_VIP3_CHUNK
VIP Host Port DMA Chunk size
Bits
7:0
15:8
23:16
31:24
Default
0xf
0xf
0xf
0xf
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-128
Description
VIP Host Port DMA channel 0 Chunk size
VIP Host Port DMA channel 1 Chunk size
VIP Host Port DMA channel 2 Chunk size
VIP Host Port DMA channel 3 Chunk size
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
DMA_VIP0_TABLE_ADDR - W - 32 bits - [GpuF0MMReg:0xA20]
Field Name
DMA_VIPH_TABLE_ADDR
VIP Port 0 DMA table starting address
Bits
31:0
Default
0x0
Description
This points to first entry in the DMA table.
DMA_VIP1_TABLE_ADDR - W - 32 bits - [GpuF0MMReg:0xA30]
Field Name
DMA_VIPH_TABLE_ADDR
VIP Port 1 DMA table starting address
Bits
31:0
Default
0x0
Description
This points to first entry in the DMA table.
DMA_VIP2_TABLE_ADDR - W - 32 bits - [GpuF0MMReg:0xA40]
Field Name
DMA_VIPH_TABLE_ADDR
VIP Port 2 DMA table starting address
Bits
31:0
Default
0x0
Description
This points to first entry in the DMA table.
DMA_VIP3_TABLE_ADDR - W - 32 bits - [GpuF0MMReg:0xA50]
Field Name
DMA_VIPH_TABLE_ADDR
VIP Port 3 DMA table starting address
Bits
31:0
Default
0x0
Description
This points to first entry in the DMA table.
DMA_VIPH0_ACTIVE - R - 32 bits - [GpuF0MMReg:0xA24]
Field Name
DMA_VIPH_TABLE_ADDR_ACT
VIP Port 0 DMA Current table address
Bits
31:0
Default
0x0
Description
This points to the current active entry in the DMA table.
DMA_VIPH1_ACTIVE - R - 32 bits - [GpuF0MMReg:0xA34]
Field Name
DMA_VIPH_TABLE_ADDR_ACT
VIP Port 1 DMA Current table address
Bits
31:0
Default
0x0
Description
This points to the current active entry in the DMA table.
DMA_VIPH2_ACTIVE - R - 32 bits - [GpuF0MMReg:0xA44]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-129
VIP/I2C Registers
DMA_VIPH_TABLE_ADDR_ACT
VIP Port 2 DMA Current table address
31:0
0x0
This points to the current active entry in the DMA table.
DMA_VIPH3_ACTIVE - R - 32 bits - [GpuF0MMReg:0xA54]
Field Name
DMA_VIPH_TABLE_ADDR_ACT
VIP Port 3 DMA Current table address
Bits
31:0
Default
0x0
Description
This points to the current active entry in the DMA table.
DMA_VIPH_ABORT - RW - 32 bits - [GpuF0MMReg:0xA88]
Field Name
DMA_VIPH0_ABORT_EN
Bits
3
Default
0x0
DMA_VIPH1_ABORT_EN
7
0x0
DMA_VIPH2_ABORT_EN
11
0x0
DMA_VIPH3_ABORT_EN
15
0x0
DMA_VIPH0_RESET
DMA_VIPH1_RESET
DMA_VIPH2_RESET
DMA_VIPH3_RESET
VIP Host Port DMA abort control registers
20
21
22
23
0x0
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-130
Description
Enable abort action
0=Normal
1=Enable queue abort
Enable abort action
0=Normal
1=Enable queue abort
Enable abort action
0=Normal
1=Enable queue abort
Enable abort action
0=Normal
1=Enable queue abort
Soft reset. Reset the DMA and job queue.
Soft reset. Reset the DMA and job queue.
Soft reset. Reset the DMA and job queue.
Soft reset. Reset the DMA and job queue.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
2.5.5
General Purpose I/O Data and Control Registers
Registers responsible for GPIO Pads’ Programmability and values.
GPIOPAD_STRENGTH - RW - 32 bits - [GpuF0MMReg:0x1794]
Field Name
GPIO_STRENGTH_SN
Bits
3:0
Default
0x9
GPIO_STRENGTH_SP
7:4
0xa
Pad strength for GPIOs
Description
For NMOS of GPIOs.
0=For NMOS of GPIOs.
For PMOS of GPIOs.
0=For PMOS of GPIOs.
GPIOPAD_MASK - RW - 32 bits - [GpuF0MMReg:0x1798]
GPIO_MASK
Field Name
Bits
28:0
Default
0x0
GPIO pads mask register
Description
GPIO pads mask.
Allows software to control the
GPIO pad.
POSSIBLE VALUES:
1
- Only software can control GPIO pad.
0Allows chip components to control GPIO pad.
GPIOPAD_A - RW - 32 bits - [GpuF0MMReg:0x179C]
GPIO_A
Field Name
Bits
28:0
Default
0x0
GPIO pads output register
Description
GPIO pads output. The value to be outputted to the pads if
GPIO_EN is '1'.
GPIOPAD_EN - RW - 32 bits - [GpuF0MMReg:0x17A0]
GPIO_EN
Field Name
Bits
28:0
Default
0x0
GPIO pads output enable register
Description
GPIO pads output enable. If 1, GPIO pad is in output
mode. If 0, GPIO pad accepts inputs from pads.
GPIOPAD_Y - RW - 32 bits - [GpuF0MMReg:0x17A4]
Field Name
GPIO_Y (R)
GPIO pad input read back
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
28:0
Default
0x0
Description
GPIO pads input (or the values on the GPIO pads).
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-131
VIP/I2C Registers
GPIOPAD_EXTERN_TRIG_CNTL - RW - 32 bits - [GpuF0MMReg:0x17C4]
Field Name
EXTERN_TRIG_SEL
Bits
4:0
Default
0x0
EXTERN_TRIG_CLR (W)
5
0x0
EXTERN_TRIG_READ (R)
6
0x0
Description
Selects whether one of the GPIOs, or a signal from display
is used for detecting an external trigger event:
0= GPIO_0
1= GPIO_1
2= GPIO_2
3= GPIO_3
4= GPIO_4
5= GPIO_5
6= GPIO_6
7= GPIO_7
8= GPIO_8
9= GPIO_9
10= GPIO_10
11= GPIO_11
12= GPIO_12
13= GPIO_13
14= GPIO_14
15= GPIO_15
16= GPIO_16
17= GPIO_17
18= GPIO_18
19= GPIO_19
20= GPIO_20
21= Display pin
22= Disable external trigger source event for both GPIO
pad and Display pin
Clearing External Trigger logic:
0= Write 0 has no affect.
1= Write 1 sets EXTERN_TRIG_READ to 0.
Checks the status of an external trigger event:
0= No external trigger event occurred OR an external
trigger event that has been acknowledged by writing to
EXTERN_TRIG_CLR with a '1'.
1= An external trigger event has occurred and is waiting
to be acknowledged.
External Trigger register
2.5.6
VIP Miscellaneous Registers
VIPPAD_MASK - RW - 32 bits - [GpuF0MMReg:0xAC0]
Field Name
VIPPAD_MASK_SCL
VIPPAD_MASK_SDA
VIPPAD_MASK_VHAD
Bits
0
Default
0x0
1
0x0
3:2
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-132
Description
Desktop: GPIO override for SCL. Mobile: GPIO override for
GPIO[19].
0=Pin not enabled for GPIO
1=Pin enabled for GPIO. Normal function overridden.
Desktop: GPIO override for SDA. Mobile: GPIO override for
GPIO[18].
0=Pin not enabled for GPIO
1=Pin enabled for GPIO. Normal function overridden.
Desktop: GPIO override for VHAD[1:0]. Mobile: GPIO
override for GPIO[23:22].
0=Pin not enabled for GPIO
1=Pin enabled for GPIO. Normal function overridden.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
VIPPAD_MASK_VPHCTL
4
0x0
Desktop: GPIO override for VPHCTL. Mobile: GPIO
override for GPIO[21].
0=Pin not enabled for GPIO
1=Pin enabled for GPIO. Normal function overridden.
VIPPAD_MASK_VIPCLK
5
0x0
Desktop: GPIO override for VIPCLK. Mobile: GPIO override
for GPIO[20].
0=Pin not enabled for GPIO
1=Pin enabled for GPIO. Normal function overridden.
VIPPAD_MASK_VID
15:8
0x0
Desktop: GPIO override for VID[7:0]. Mobile: GPIO override
for GPIO[34:27].
0=Pin not enabled for GPIO
1=Pin enabled for GPIO. Normal function overridden.
VIPPAD_MASK_VPCLK0
16
0x0
Desktop: GPIO override for VPCLK0. Mobile: GPIO
override for GPIO[24].
0=Pin not enabled for GPIO
1=Pin enabled for GPIO. Normal function overridden.
VIPPAD_MASK_DVALID
17
0x0
Desktop: GPIO override for DVALID. Mobile: GPIO override
for GPIO[26].
0=Pin not enabled for GPIO
1=Pin enabled for GPIO. Normal function overridden.
VIPPAD_MASK_PSYNC
18
0x0
Desktop: GPIO override for PSYNC. Mobile: GPIO override
for GPIO[25].
0=Pin not enabled for GPIO
1=Pin enabled for GPIO. Normal function overridden.
Desktop: Multimedia Interface GPIO Mask Control. Mobile: Additional GPIO Interface Mask Control
VIPPAD_A - RW - 32 bits - [GpuF0MMReg:0xAC4]
Field Name
VIPPAD_A_SCL
Bits
0
Default
0x0
1
0x0
3:2
0x0
VIPPAD_A_VPHCTL
4
0x0
VIPPAD_A_VIPCLK
5
0x0
VIPPAD_A_SDA
VIPPAD_A_VHAD
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Desktop: Output for SCL. Mobile: Output for GPIO[19].
0=GPIO output is low for this pin, if mask and output are
enabled.
1=GPIO output is high for this pin, if mask and output are
enabled.
Desktop: Output for SDA. Mobile: Output for GPIO[18].
0=GPIO output is low for this pin, if mask and output are
enabled.
1=GPIO output is high for this pin, if mask and output are
enabled.
Desktop: Output for VHAD[1:0]. Mobile: Output for
GPIO[23:22].
0=GPIO output is low for this pin, if mask and output are
enabled.
1=GPIO output is high for this pin, if mask and output are
enabled.
Desktop: Output for VPHCTL. Mobile: Output for GPIO[21].
0=GPIO output is low for this pin, if mask and output are
enabled.
1=GPIO output is high for this pin, if mask and output are
enabled.
Desktop: Output for VIPCLK. Mobile: Output for GPIO[20].
0=GPIO output is low for this pin, if mask and output are
enabled.
1=GPIO output is high for this pin, if mask and output are
enabled.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-133
VIP/I2C Registers
VIPPAD_A_VID
Desktop: Output for VID[7:0]. Mobile: Output for
GPIO[34:27].
0=GPIO output is low for this pin, if mask and output are
enabled.
1=GPIO output is high for this pin, if mask and output are
enabled.
VIPPAD_A_VPCLK0
16
0x0
Desktop: Output for VPCLK0. Mobile: Output for GPIO[24].
0=GPIO output is low for this pin, if mask and output are
enabled.
1=GPIO output is high for this pin, if mask and output are
enabled.
VIPPAD_A_DVALID
17
0x0
Desktop: Output for DVALID. Mobile: Output for GPIO[26].
0=GPIO output is low for this pin, if mask and output are
enabled.
1=GPIO output is high for this pin, if mask and output are
enabled.
VIPPAD_A_PSYNC
18
0x0
Desktop: Output for PSYNC. Mobile: Output for GPIO[25].
0=GPIO output is low for this pin, if mask and output are
enabled.
1=GPIO output is high for this pin, if mask and output are
enabled.
Desktop: Multimedia Interface GPIO Output Control; Mobile: Additional GPIO Interface Output Control
Field Name
VIPPAD_EN_SCL
15:8
0x0
VIPPAD_EN - RW - 32 bits - [GpuF0MMReg:0xAC8]
Bits
0
Default
0x0
1
0x0
3:2
0x0
VIPPAD_EN_VPHCTL
4
0x0
VIPPAD_EN_VIPCLK
5
0x0
15:8
0x0
VIPPAD_EN_VPCLK0
16
0x0
VIPPAD_EN_DVALID
17
0x0
VIPPAD_EN_SDA
VIPPAD_EN_VHAD
VIPPAD_EN_VID
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-134
Description
Desktop: Output enable for SCL. Mobile: Output enable for
GPIO[19].
0=GPIO output is disabled for this pin.
1=GPIO output is enabled for this pin.
Desktop: Output enable for SDA. Mobile: Output enable for
GPIO[18].
0=GPIO output is disabled for this pin.
1=GPIO output is enabled for this pin.
Desktop: Output enable for VHAD[1:0]. Mobile: Output
enable for GPIO[23:22].
0=GPIO output is disabled for this pin.
1=GPIO output is enabled for this pin.
Desktop: Output enable for VPHCTL. Mobile: Output enable
for GPIO[21].
0=GPIO output is disabled for this pin.
1=GPIO output is enabled for this pin.
Desktop: Output enable for VIPCLK. Mobile: Output enable
for GPIO[20].
0=GPIO output is disabled for this pin.
1=GPIO output is enabled for this pin.
Desktop: Output enable for VID[7:0]. Mobile: Output enable
for GPIO[34:27].
0=GPIO output is disabled for this pin.
1=GPIO output is enabled for this pin.
Desktop: Output enable for VPCLK0. Mobile: Output enable
for GPIO[24].
0=GPIO output is disabled for this pin.
1=GPIO output is enabled for this pin.
Desktop: Output enable for DVALID. Mobile: Output enable
for GPIO[26].
0=GPIO output is disabled for this pin.
1=GPIO output is enabled for this pin.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
VIPPAD_EN_PSYNC
18
0x0
Desktop: Output enable for PSYNC. Mobile: Output enable
for GPIO[25].
0=GPIO output is disabled for this pin.
1=GPIO output is enabled for this pin.
Desktop: Multimedia Interface GPIO Output Enable Control; Mobile: Additional GPIO Interface Output Enable Control
VIPPAD_Y - R - 32 bits - [GpuF0MMReg:0xACC]
Field Name
VIPPAD_Y_SCL
Bits
0
Default
0x0
Description
Desktop: Input readback of SCL. Mobile: Input readback of
GPIO[19].
0=This pin was low at time of read.
1=This pin was high at time of read.
VIPPAD_Y_SDA
1
0x0
Desktop: Input readback of SDA. Mobile: Input readback of
GPIO[18].
0=This pin was low at time of read.
1=This pin was high at time of read.
VIPPAD_Y_VHAD
3:2
0x0
Desktop: Input readback of VHAD[1:0]. Mobile: Input
readback of GPIO[23:22].
0=This pin was low at time of read.
1=This pin was high at time of read.
VIPPAD_Y_VPHCTL
4
0x0
Desktop: Input readback of VPHCTL. Mobile: Input
readback of GPIO[21].
0=This pin was low at time of read.
1=This pin was high at time of read.
VIPPAD_Y_VIPCLK
5
0x0
Desktop: Input readback of VIPCLK. Mobile: Input readback
of GPIO[20].
0=This pin was low at time of read.
1=This pin was high at time of read.
VIPPAD_Y_VID
15:8
0x0
Desktop: Input readback of VID. Mobile: Input readback of
GPIO[34:27].
0=This pin was low at time of read.
1=This pin was high at time of read.
VIPPAD_Y_VPCLK0
16
0x0
Desktop: Input readback of VPCLK0. Mobile: Input
readback of GPIO[24].
0=This pin was low at time of read.
1=This pin was high at time of read.
VIPPAD_Y_DVALID
17
0x0
Desktop: Input readback of DVALID. Mobile: Input readback
of GPIO[26].
0=This pin was low at time of read.
1=This pin was high at time of read.
VIPPAD_Y_PSYNC
18
0x0
Desktop: Input readback of PSYNC. Mobile: Input readback
of GPIO[25].
0=This pin was low at time of read.
1=This pin was high at time of read.
Desktop: Multimedia Interface GPIO Input Readback; Mobile: Additional GPIO Interface Input Readback
VIPPAD_STRENGTH - RW - 32 bits - [GpuF0MMReg:0xAD0]
Field Name
I2C_STRENGTH_SN
Bits
3:0
Default
0x7
I2C_STRENGTH_SP
7:4
0x4
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Desktop: NMOS of SCL and SDA. Mobile: NMOS of
GPIO[19:18].
Desktop: PMOS of SCL and SDA. Mobile: PMOS of
GPIO[19:18].
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-135
VIP/I2C Registers
VIPHDAT_STRENGTH_SN
11:8
0x7
Desktop: NMOS of VHAD[1:0] and VPHCTL. Mobile:
NMOS of GPIO[23:21].
VIPHDAT_STRENGTH_SP
15:12
0x4
Desktop: PMOS of VHAD[1:0] and VPHCTL. Mobile: PMOS
of GPIO[23:21].
VIPHCLK_STRENGTH_SN
19:16
0x7
Desktop: NMOS of VIPCLK. Mobile: NMOS of GPIO[20].
VIPHCLK_STRENGTH_SP
23:20
0x4
Desktop: PMOS of VIPCLK. Mobile: PMOS of GPIO[20].
VIDCAP_STRENGTH_SN
27:24
0x7
Desktop: NMOS of VID, VPCLK0, PSYNC, and DVALID.
Mobile: NMOS of GPIO[34:24].
VIDCAP_STRENGTH_SP
31:28
0x4
Desktop: PMOS of VID, VPCLK0, PSYNC, and DVALID.
Mobile: PMOS of GPIO[34:24].
Desktop: Multimedia Interface GPIO Output Driver Strength; Mobile: Additional GPIO Interface Output Driver Strength
EXTERN_TRIG_CNTL - RW - 32 bits - [GpuF0MMReg:0xE54]
Field Name
EXTERN_TRIG_CLR (W)
Bits
0
Default
none
EXTERN_TRIG_READ (R)
1
none
External Trigger Control
Description
External Trigger Clear:
Write 0 has no affect.
Write 1 sets the external trigger to 0.
External Trigger Status:
0 - Indicates WAIT condition is active.
1 - Indicates WAIT condition is not active.
ROM_CNTL - RW - 32 bits - [GpuF0MMReg:0x1600]
Field Name
SCK_OVERWRITE
Bits
1
Default
0x0
2
0x0
CSB_ACTIVE_TO_SCK_SETUP_TIME
15:8
0x3
CSB_ACTIVE_TO_SCK_HOLD_TIME
23:16
0x3
SCK_PRESCALE_REFCLK
27:24
0x1
SCK_PRESCALE_CRYSTAL_CLK
31:28
0x1
CLOCK_GATING_EN
ROM controller control registers.
Description
Overwirte the default SCK clock source.
0=SCK sourced from sclk.
1=SCK sourced from crystal clock.
ROM read controller dynamic clock gating enable.
0=Software disable the dynamic clock going to the read
controller
1=Software enable the dynamic clock going to the read
controller
CSb active to SCK setup time. Programmable delay in
number of SCK cycles.
CSb active to SCK hold time. Programmable delay in
number of SCK cycles. Actual hold time is (this delay + one
SCK cycle).
Programmable SCK divider when clock source is PCIE
REFCLK.
Programmable SCK divider when clock source is on-board
crystal clock.
ROM_STATUS - R - 32 bits - [GpuF0MMReg:0x1608]
Field Name
ROM_BUSY
ROM controller status registers.
Bits
0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-136
Description
The ROM SPI interface is busy doing transaction.
© 2007 Advanced Micro Devices, Inc.
Proprietary
VIP/I2C Registers
ROM_INDEX - RW - 32 bits - [GpuF0MMReg,GpuIOReg:0xA8]
ROM_INDEX
Field Name
Bits
23:0
Default
0x0
Description
Address in the ROM aperture space. The ROM device
physical address is calculated based on the ROM_START
register, plus this ROM_INDEX field. The ROM controller
will read 4 bytes starting from this address.
Address for indirect read access to ROM.
ROM_DATA - R - 32 bits - [GpuF0MMReg,GpuIOReg:0xAC]
Field Name
ROM_DATA
Data from indirect read access to ROM.
Bits
31:0
Default
0x0
Description
Four bytes of data from indirect read access to ROM.
ROM_START - RW - 32 bits - [GpuF0MMReg:0x1614]
Description
ROM device starting address that points to the starting of
the ROM aperture. This is used by software to read the
whole ROM device via ROM aperture when the device size
is larger than the aperture size.
ROM device starting address that points to the starting of the ROM aperture. Default to 0x0.
ROM_START
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
23:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-137
Video Graphics Array (VGA) Registers
2.6
Video Graphics Array (VGA) Registers
VGA Control Registers
2.6.1
VGA Control/Status Registers
General purpose status VGA
GENMO_WT - W - 8 bits - [GpuF0MMReg,VGA_IO:0x3C2]
Field Name
GENMO_MONO_ADDRESS_B
Bits
0
Default
0x0
1
0x0
3:2
0x0
ODD_EVEN_MD_PGSEL
5
0x0
VGA_HSYNC_POL
VGA_VSYNC_POL
6
7
0x0
0x0
VGA_RAM_EN
VGA_CKSEL
Description
0=Monochrome emulation, regs at 0x3Bx
1=Color/Graphic emulation, regs at 0x3Dx
0=Disable
1=Enable
0=25.1744MHz (640 Pels)
1=28.3212MHz (720 Pels)
2=Reserved
3=Reserved
0=Selects odd (high) memory locations
1=Selects even (low) memory locations
GENMO_RD - R - 8 bits - [GpuF0MMReg,VGA_IO:0x3CC]
Field Name
GENMO_MONO_ADDRESS_B
Bits
0
Default
0x0
Description
0=Monochrome emulation, regs at 0x3Bx
1=Color/Graphic emulation, regs at 0x3Dx
1
0x0
0=Disable
1=Enable
3:2
0x0
5
0x0
0=25.1744MHz (640 Pels)
1=28.3212MHz (720 Pels)
2=Reserved
3=Reserved
0=Selects odd (high) memory locations
1=Selects even (low) memory locations
6
0x0
7
0x0
(mirror of
GENMO_WT:GENMO_MONO_ADDRESS_B)
VGA_RAM_EN
(mirror of GENMO_WT:VGA_RAM_EN)
VGA_CKSEL
(mirror of GENMO_WT:VGA_CKSEL)
ODD_EVEN_MD_PGSEL
(mirror of
GENMO_WT:ODD_EVEN_MD_PGSEL)
VGA_HSYNC_POL
(mirror of GENMO_WT:VGA_HSYNC_POL)
VGA_VSYNC_POL
(mirror of GENMO_WT:VGA_VSYNC_POL)
GENENB - R - 8 bits - [GpuF0MMReg,VGA_IO:0x3C3]
Field Name
BLK_IO_BASE
Bits
7:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-138
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
GENFC_WT - W - 8 bits - [GpuF0MMReg:0x3BA] [GpuF0MMReg:0x3DA] [VGA_IO:0x3BA] [VGA_IO:0x3DA]
Field Name
VSYNC_SEL_W
Bits
3
Default
0x0
Feature Control Register (Read)
Description
Vertical sync select (write).
0=Normal vertical sync
1=Sync is 'vertical sync' ORed with 'vertical display
enable'
GENFC_RD - R - 8 bits - [GpuF0MMReg,VGA_IO:0x3CA]
Field Name
VSYNC_SEL_R
Bits
3
Default
0x0
(mirror of GENFC_WT:VSYNC_SEL_W)
Feature Control Regsiter (Read)
Description
Veritcal sync select (read).
0=Normal vertical sync
1=Sync is 'vertical sync' ORed with 'vertical display
enable'
GENS0 - R - 8 bits - [GpuF0MMReg,VGA_IO:0x3C2]
Field Name
SENSE_SWITCH
CRT_INTR
Bits
4
Default
0x0
7
0x0
Description
DAC comparator read back. Used for monitor detection.
Mirror of DAC_CMP_OUTPUT@DAC_CNTL. See
description there.
CRT Interrupt:
0=Vertical retrace interrupt is cleared
1=Vertical retrace interrupt is pending
Input Status 0 Register
GENS1 - R - 8 bits - [GpuF0MMReg:0x3BA] [GpuF0MMReg:0x3DA] [VGA_IO:0x3BA] [VGA_IO:0x3DA]
NO_DISPLAY
Field Name
VGA_VSTATUS
PIXEL_READ_BACK
Bits
0
Default
0x0
3
0x0
5:4
0x0
Description
Display enable.
0=Enable
1=Disable
Vertical Retrace Status.
0=Vertical retrace not active
1=Vertical retrace active
Diagnostic bits 0, 1 respectively.
These two bits are connected to two of the eight colour
outputs (P7:P0) of the attribute controller. Connections are
controlled by ATTR12(5,4) as follows:
0=P2,P0
1=P5,P4
2=P3,P1
3=P7,P6
Input Status 1 Register
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-139
Video Graphics Array (VGA) Registers
2.6.2
VGA DAC Control Registers
DAC_DATA - RW - 8 bits - [GpuF0MMReg,VGA_IO:0x3C9]
Field Name
Bits
5:0
DAC_DATA
Default
0x0
VGA Palette (DAC) Data
Description
VGA Palette (DAC) Data. Use DAC_R_INDEX and
DAC_W_INDEX to set read or write mode, and entry to
access.
Access order is Red, Green, Blue, and then auto-increment
occurs to next entry.
DAC_8BIT_EN controls whether 6 or 8 bit access.
DAC_MASK - RW - 8 bits - [GpuF0MMReg,VGA_IO:0x3C6]
Field Name
Bits
7:0
DAC_MASK
Default
0x0
Description
Masks off usage of individual palette index bits before pixel
index is looked-up in the palette.
0 = do not use this bit of the index
1 = use this bit of the index
Only has an effect in VGA emulation modes
(CRTC_EXT_DISP_EN=0), not for VESA modes or
extended display modes.
Palette index mask for VGA emulation modes.
DAC_R_INDEX - RW - 8 bits - [GpuF0MMReg,VGA_IO:0x3C7]
Field Name
DAC_R_INDEX
Bits
7:0
Default
0x0
Description
Write: Sets the index for a palette (DAC) read operation.
Index auto-increments after every third read of DAC_DATA.
Read: Indicates if palette in read or write mode.
0 = Palette in write mode (DAC_W_INDEX last written).
3 = Palette in read mode (DAC_R_INDEX last written).
Aslo see DAC_W_INDEX.
Palette (DAC) Read Index
DAC_W_INDEX - RW - 8 bits - [GpuF0MMReg,VGA_IO:0x3C8]
Field Name
DAC_W_INDEX
Bits
7:0
Default
0x0
Description
Sets the index for a palette (DAC) write operation. Index
auto-increments after every third write of DAC_DATA. Aslo
see DAC_R_INDEX.
Palette (DAC) Write Index
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-140
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
2.6.3
VGA Sequencer Registers
SEQ8_IDX - RW - 8 bits - [GpuF0MMReg,VGA_IO:0x3C4]
Field Name
Bits
2:0
SEQ_IDX
Default
0x0
Description
SEQ8_DATA - RW - 8 bits - [GpuF0MMReg,VGA_IO:0x3C5]
Field Name
SEQ_DATA
Bits
7:0
Default
0x0
Description
SEQ00 - RW - 8 bits - VGASEQIND:0x0
Field Name
SEQ_RST0B
Bits
0
Default
0x1
SEQ_RST1B
1
0x1
Reset Register
Description
Synchronous reset bit 0:
0=Follows SEQ_RST1B
1=Sequencer runs unless SEQ_RST1B=0
Synchronous reset bit 1:
0=Disable character clock, display requests, and H/V
syncs
1=Sequencer runs unless SEQ_RST0B=0
SEQ01 - RW - 8 bits - VGASEQIND:0x1
Bits
0
Default
0x1
SEQ_SHIFT2
2
0x0
SEQ_PCLKBY2
3
0x0
SEQ_SHIFT4
4
0x0
SEQ_DOT8
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
8/9 Dot Clocks (Modes 1, 2, 3, and 7 use 9-dot characters.
To change bit 0, GENVS(0) must be logical 0).
0=9 dot char clock. Modes 0, 1, 2, 3 & 7
1=8 dot char clock.
Shift load bits.
0=Load video serializer every clock, if SEQ_SHIFT4=0
1=Load video serializer every other clock, if
SEQ_SHIFT4=0
Dot Clock (typically, 320 and 360 horizontal modes use
divide-by-2 to provide 40 column displays. To change this
bit SEQ00[0:0] must be first set to zero.)).
0=Dot clock is normal
1=Dot clock is divided by 2
Shift load bits.
0=SEQ_SHIFT2 determines serializer loading
1=Load video serializer every fourth clock. Ignore
SEQ_SHIFT2
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-141
Video Graphics Array (VGA) Registers
SEQ_MAXBW
5
0x1
Screen off:
0=Normal. Screen on
1=Sreen off and blanked. CPU has uninterrupted access
to frame buffer
Clock Mode Register
SEQ02 - RW - 8 bits - VGASEQIND:0x2
Field Name
SEQ_MAP0_EN
Bits
0
Default
0x0
SEQ_MAP1_EN
1
0x0
SEQ_MAP2_EN
2
0x0
SEQ_MAP3_EN
3
0x0
Description
0=Disable write to memory map 0
1=Enable write to memory map 0
0=Disable write to memory map 1
1=Enable write to memory map 1
0=Disable write to memory map 2
1=Enable write to memory map 2
0=Disable write to memory map 3
1=Enable write to memory map 3
SEQ03 - RW - 8 bits - VGASEQIND:0x3
Field Name
SEQ_FONT_B1
SEQ_FONT_B2
SEQ_FONT_A1
SEQ_FONT_A2
SEQ_FONT_B0
SEQ_FONT_A0
Character Map Select Register
Bits
0
1
2
3
4
5
Default
0x0
0x0
0x0
0x0
0x0
0x0
Description
Character Map Select B Bit 1
Character Map Select B Bit 2
Character Map Select A Bit 1
Character Map Select A Bit 2
Character Map Select B Bit 0
Character Map Select A Bit 0
SEQ04 - RW - 8 bits - VGASEQIND:0x4
Field Name
Bits
1
Default
0x0
SEQ_ODDEVEN
2
0x0
SEQ_CHAIN
3
0x0
SEQ_256K
2.6.4
Description
0=64KB memory present. Has no effect since 256KB
always available
1=256KB memory present
0=Even CPU address (A0=0) accesses maps 0 and 2.
Odd address accesses maps 1 and 3
1=Enables sequential access to maps for odd/even
modes. SEQ02 (Map Mask) selects which maps are used
0=Enables sequential access to maps. SEQ02 (Map
Mask) selects which maps are used
1=For 256 color modes. Map select by CPU address bits
A1:A0
VGA CRT Registers
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-142
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
CRTC8_IDX - RW - 8 bits - [GpuF0MMReg:0x3B4] [GpuF0MMReg:0x3D4] [VGA_IO:0x3B4] [VGA_IO:0x3D4]
VCRTC_IDX
Field Name
Bits
5:0
Default
0x0
Description
CRTC8_DATA - RW - 8 bits - [GpuF0MMReg:0x3B5] [GpuF0MMReg:0x3D5] [VGA_IO:0x3B5]
[VGA_IO:0x3D5]
Field Name
VCRTC_DATA
Bits
7:0
Default
0x0
Description
CRT00 - RW - 8 bits - VGACRTIND:0x0
Field Name
H_TOTAL
Bits
7:0
Default
0x0
Horizontal Total Register
Description
These bits define the active horizontal display in a scan line,
including the retrace period. The value is five less than the
total number of displayed characters in a scan line.
CRT01 - RW - 8 bits - VGACRTIND:0x1
Field Name
H_DISP_END
Bits
7:0
Default
0x0
Horizontal Display Enable End Register
Description
These bits define the active horizontal dispaly in a scan line.
The value is one less than the total number of displayed
characters in a scan line.
CRT02 - RW - 8 bits - VGACRTIND:0x2
Field Name
H_BLANK_START
Bits
7:0
Default
0x0
Start Horizontal Blanking Register
Description
These bits define the horizontal character count that
represents the character coune in the active display area
plus the right borger. In other words, the count is from the
start of active display to the start of triggering of the H
blanking pulse.
CRT03 - RW - 8 bits - VGACRTIND:0x3
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-143
Video Graphics Array (VGA) Registers
H_BLANK_END
4:0
0x0
H_DE_SKEW
6:5
0x0
7
0x0
CR10CR11_R_DIS_B
End Horizontal Blanking Register
H blanking bits 4-0 respectively. These are the five
low-order bits (of six bits in total) of horizontal character
count for triggering the end of the horizontal blanking pulse.
Display-enable skew:
0=0Skew
1=1Skew
2=2Skew
3=3Skew
Comptibility Read:
0=WrtOnlyToCRT10-11
1=WrtRdToCRT10-11
CRT04 - RW - 8 bits - VGACRTIND:0x4
Field Name
H_SYNC_START
Bits
7:0
Default
0x0
Start Horizontal Retrace Register
Description
These bits define the horizontal character count at which
the horizontal retrace pulse becomes active.
CRT05 - RW - 8 bits - VGACRTIND:0x5
Field Name
H_SYNC_END
Bits
4:0
Default
0x0
H_SYNC_SKEW
6:5
0x0
7
0x0
H_BLANK_END_B5
End Horizontal Retrace Register
Description
H Retrace Bits (these are the 5-bit result from the sum of
CRT0 plus the width of the horizontal retrace pulse, in
character clock units).
H Retrace Delay bits (these two bits skew the horizontal
retrace pulse).
H blocking end bit 5 (this is the bit of the 6-bit character
count for the H blanking end pulse). The other five
low-order bits are CRT03[4:0].
CRT06 - RW - 8 bits - VGACRTIND:0x6
V_TOTAL
Field Name
Bits
7:0
Default
0x0
Vertical Total Register
Description
These are the eight low-order bits of the 10-bit vertical total
register. The 2 high-order bits are CRT07[5:0] in the CRTC
overflow register. The value of this register represents the
total number of H raster scans plus vertical retrace (active
display, blanking), minus two scan lines.
CRT07 - RW - 8 bits - VGACRTIND:0x7
V_TOTAL_B8
Field Name
Bits
0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-144
Description
V Total Bit 8 (CRT06). Bit 8 of 10 bit vertical count for V
Total. For functional description see CRT06 register.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
V_DISP_END_B8
1
0x0
V_SYNC_START_B8
2
0x0
V_BLANK_START_B8
3
0x0
LINE_CMP_B8
4
0x0
V_TOTAL_B9
5
0x0
V_DISP_END_B9
6
0x0
V_SYNC_START_B9
7
0x0
CRTC Overflow Register
Field Name
ROW_SCAN_START
BYTE_PAN
End V Display Bit 8 (CRT12). Bit 8 of 10-bit vertical count
for V Display enable. For functional desription see CRT12
register.
Start V Retrace Bit 8 (CRT10). Bit 8 of 10-bit veritcal count
for V Retrace start. For functional description see CRT10
register.
Start V Blanking Bit 8 (CRT15). Bit 8 of the 10-bit vertical
count for V Blanking start. For functional description see
CRT15 register.
Line compare bit 8 (CRT18). Bit 8 of the 10-bit vertical
count for line compare. For functional description see
CRT18 register.
V Total Bit 9 (CRT06). Bit 9 of 10-bit vertical count for V
Total. For functional description see CRT06 register.
End V Display Bit 9 (CRT12). Bit 9 of 10-bit vertical count
for V Display enable end (for functional description see
CRT12 register).
Start V Retrace Bit (CRT10). Bit 9 of 10-bit vertical count
for V Retrace start. For functional description see CRT10
register.
CRT08 - RW - 8 bits - VGACRTIND:0x8
Bits
4:0
Default
0x0
6:5
0x0
Preset Row Scan Register
Description
Preset row scan bit 4:0. This register is used for
software-controlled vertical scrolling in text or graphics
modes. The value specifies the first line to be scanned after
a V retrace (in the next frame). Each H Retrace pulse
increments the counter by 1, up to the maximum scan line
value programmed by CRT09, then the counter is cleared.
Byte panning control bits 1 and 0 (respectively). Bits 6 and
5 extend the capability of byte panning (shifting) by up to
three characters (for description H_PEL Panning register
ATTR13).
CRT09 - RW - 8 bits - VGACRTIND:0x9
Field Name
MAX_ROW_SCAN
Bits
4:0
Default
0x0
V_BLANK_START_B9
5
0x0
LINE_CMP_B9
6
0x0
DOUBLE_CHAR_HEIGHT
7
0x0
Maximum Scan Line Register
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Maximum scan line bits. These bits define a value that is
the actual number of scan line per character minus 1.
Start V Blanking bit 9 (CRT15). Bit 9 of 10-bit veritcal count
for line compare. For functional description see CRT18
register.
Line Compare Bit 9 (CRT18). Bit 9 of 10-bit vertical count
for line compare. For functional description see CRT18
register.
200/400 line scan. NOTE H/V display and blanking timings
etc. (in CRT00-CRT06 registers) are not affected.
0=200LineScan
1=400LineScan
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-145
Video Graphics Array (VGA) Registers
CRT0A - RW - 8 bits - VGACRTIND:0xA
Field Name
CURSOR_START
CURSOR_DISABLE
Bits
4:0
Default
0x0
5
0x0
Cursor Start Register
Description
Cursor start bits 4:0 (respectively). These bits define a
value that is the starting scan line (on a character row) for
the line cursor. The 5-bit value is equal to the actual
number minus one. This value is used together with the
Cursor End Bits CRT0B[4:0] to determine the height of the
cursor. The cursor height in VGA does not wrap around (as
in EGA) and is actually absent when the 'end' value is less
than the 'start' value. In EGA when the 'end' value is less,
the cursor is a full block cursor the same height as the
character cell.
Cursor on/off.
0=on
1=off
CRT0B - RW - 8 bits - VGACRTIND:0xB
Field Name
CURSOR_END
Bits
4:0
Default
0x0
CURSOR_SKEW
6:5
0x0
Cursor End Register
Description
Cursor End Bits 4-0, respectively.- These bits define the
ending scan row (on a character line) for the line cursor. In
EGA, this 5-bit value is equal to the actual number of lines
plus one.- The cursor height in VGA does not wrap around
(as in EGA) and is actually absent when the 'end' value is
less than the 'start' value. In EGA when the 'end' value is
less, the cursor is a full block cursor the same height as the
character cell.
Cursor Skew Bits 1 and 0, respectively.- These bits define
the number of characters the cursor is to be shifted to the
right (skewed) from the character pointed at by the cursor
location (registers CRT0E and CRT0F), in VGA mode.
Skew values when in EGA mode are enclosed in brackets.
CRT0C - RW - 8 bits - VGACRTIND:0xC
DISP_START
Field Name
Bits
7:0
Default
0x0
Start Address (High Byte) Register
Description
SA bits 15:8-These are the eight high-order bits of the 16-bit
display buffer start location. The low order bits are
contained in CRT0D.-In split screen mode, CRT0C =
CRT0D point to the starting location of screen A (top half.)
The starting address for screen B is always zero.
CRT0D - RW - 8 bits - VGACRTIND:0xD
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-146
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
Field Name
DISP_START
Bits
7:0
Default
0x0
Start Address (Low Byte) Register
Description
SA bits 7:0- These are the eight low-order bits of the 16-bit
display buffer start location. The high-order bits are
contained in CRT0C. - In split creen mode, CRT0C +
CRT0D points to the starting location of screen A (top half.)
The starting address for screen B is always zero.
CRT0E - RW - 8 bits - VGACRTIND:0xE
Field Name
CURSOR_LOC_HI
Bits
7:0
Default
0x0
Description
CA bits 15:8- These are the eight high-order bits of the 16
bit cursor start address. The low-order CA bits are
contained in CRT0F. This address is relative to the start of
physical display memory address pointed to by CRT0C +
CRT0D. In other words, if CRT0C + CRT0D is changed,
the cursor still pints to the same character as before.
Cursor Location (High Byte) Register
CRT0F - RW - 8 bits - VGACRTIND:0xF
Field Name
CURSOR_LOC_LO
Bits
7:0
Default
0x0
Description
CA bits 7:0- These are the eight low-order bits of the 16 bit
cursor start address. The high-order CA bits are contained
in CRT0E. This address is relative to the start of physical
display memory address pointed to by CRT0C + CRT0D. In
other words, if CRT0C + T0D is changed, the cursor still
points to the same character as before
Cursor Location (Low Byte) Register
CRT10 - RW - 8 bits - VGACRTIND:0x10
Field Name
V_SYNC_START
Bits
7:0
Default
0x0
Description
Bits CRT10[7:0] are the eight low-order bits of the 10-bit
vertical retrace start count. The two high-order bits are
CRTt07[2:7], located in the CRTC overflow register.- These
bits define the horizontal scan count that triggers the V
retrace pulse.
Start Vertical Retrace Register
CRT11 - RW - 8 bits - VGACRTIND:0x11
V_SYNC_END
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
3:0
Default
0x0
Description
V Retrace End Bits 3-0- Bits CRT11[0:3] define the
horizontal scan count that triggers the end of the V Retrace
pulse.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-147
Video Graphics Array (VGA) Registers
V_INTR_CLR
4
0x0
V_INTR_EN
5
0x0
SEL5_REFRESH_CYC
6
0x0
C0T7_WR_ONLY
7
0x0
V Retrace Interrupt Set:
0=VRetraceIntCleared
1=Not Cleared
V Retrace Interrupt Disabled:
0=VRetraceIntEna
1=Disable
0=3 DRAM Refresh/Horz Line
1=5 DRAM Refresh/Horz Line
Write Protect (CRT00-CRT06). All register bits except
CRTO7[4] are write protected.
0=EnaWrtToCRT00-07
1=C0T7B4WrtOnly
End Vertical Retrace Register
CRT12 - RW - 8 bits - VGACRTIND:0x12
V_DISP_END
Field Name
Bits
7:0
Default
0x0
Vertical Display Enable End Register
Description
These are the eight low-order bits of the 10-bit register
containing the horizontal scan count indicating where the
active display on the screen should end. The high-order
bits are CRT07 [1:6] in the CRT overflow register.
CRT13 - RW - 8 bits - VGACRTIND:0x13
DISP_PITCH
Field Name
Bits
7:0
Default
0x0
Offset Register
Field Name
UNDRLN_LOC
ADDR_CNT_BY4
DOUBLE_WORD
Description
- These bits define an offset value, equal to the logical line
width of the screen (from the first character of the current
line to the first character of the next line).- Memory
organization is dependent on the video mode. Bit CRT17[6]
selects byte or word mode. Bit CRT14[6], which overrides
the byte/word mode setting, selects Double-Word mode
when it is logical one.- The first character of the next line is
specified by the start address (CRT0C + CRT0D) plus the
offset. The offset for byte mode is 2x CRT13; for word
mode, 4x; for double word mode 8x.
CRT14 - RW - 8 bits - VGACRTIND:0x14
Bits
4:0
5
Default
0x0
0x0
6
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-148
Description
0=Char. Clock
1=CountBy4
0=Disable
1=DoubleWordMdEna
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
CRT15 - RW - 8 bits - VGACRTIND:0x15
Field Name
V_BLANK_START
Bits
7:0
Default
0x0
Start Vertical Blanking Register
Description
These are the eight low-order bits of the 10-bit vertical
blanking start register. Bit 9 is CRT09[5]; bit 8 is CRT07[3]The 10 bits specify the starting location of the vertical
blaning pulse, in units of horizontal scan lines. The value is
equal to the actual number of displayed lines minus one.
CRT16 - RW - 8 bits - VGACRTIND:0x16
Field Name
V_BLANK_END
Bits
7:0
Default
0x0
End Vertical Blanking Register
Description
These bits define the point at which to trigger the end of the
vertical blanking pulse. The location is specified in units of
horizontal scan lines.- The value to be storeed in this
register is the seven low-order bits of the sum of 'pulse
width count' plus the content of Start Vertical Blanking
register (CRT15) minus one.
CRT17 - RW - 8 bits - VGACRTIND:0x17
Field Name
RA0_AS_A13B
RA1_AS_A14B
VCOUNT_BY2
ADDR_CNT_BY2
WRAP_A15TOA0
BYTE_MODE
CRTC_SYNC_EN
Bits
0
1
2
3
5
6
Default
0x0
0x0
0x0
0x0
0x0
0x0
7
0x0
Description
0=WordMode
1=ByteMode
0=Disable HVSync
1=EnaHVSync
CRT18 - RW - 8 bits - VGACRTIND:0x18
LINE_CMP
Field Name
Line Compare Register
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
7:0
Default
0x0
Description
- These bits are the eight low-order of the 10-bit line
compare register. Bit 8 is CRT07[4], bit 9 is CRT09[6]. The
value of this register is used to disable scrolling on a portion
of the display screen, as when split screen is active. When
the vertical counter reaches this value, the memory address
and row scan counters are cleared.- The screen area above
the line specified by the register is commonly called screen
A. The screen below is screen B. Screen B cannot be
scrolled, but it can panned only together with screen A,
controlled by the PEL panning compatibility bit ATTR10[5].
(For a description of this control bit see ATTR10[5].)
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-149
Video Graphics Array (VGA) Registers
CRT1E - R - 8 bits - VGACRTIND:0x1E
Field Name
GRPH_DEC_RD1
Bits
1
Default
0x0
Description
CRT1F - R - 8 bits - VGACRTIND:0x1F
Field Name
GRPH_DEC_RD0
Bits
7:0
Default
0x0
Description
CRT22 - R - 8 bits - VGACRTIND:0x22
Field Name
GRPH_LATCH_DATA
2.6.5
Bits
7:0
Default
0x0
Description
VGA Graphics Registers
GRPH8_IDX - RW - 8 bits - [GpuF0MMReg,VGA_IO:0x3CE]
GRPH_IDX
Field Name
Bits
3:0
Default
0x0
Description
GRPH8_DATA - RW - 8 bits - [GpuF0MMReg,VGA_IO:0x3CF]
GRPH_DATA
Field Name
Bits
7:0
Default
0x0
Description
GRA00 - RW - 8 bits - VGAGRPHIND:0x0
Field Name
GRPH_SET_RESET0
GRPH_SET_RESET1
Bits
0
1
Default
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-150
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
GRPH_SET_RESET2
GRPH_SET_RESET3
2
3
0x0
0x0
GRA01 - RW - 8 bits - VGAGRPHIND:0x1
Field Name
GRPH_SET_RESET_ENA0
GRPH_SET_RESET_ENA1
GRPH_SET_RESET_ENA2
GRPH_SET_RESET_ENA3
Bits
0
1
2
3
Default
0x0
0x0
0x0
0x0
Description
GRA02 - RW - 8 bits - VGAGRPHIND:0x2
Field Name
GRPH_CCOMP
Bits
3:0
Default
0x0
Description
GRA03 - RW - 8 bits - VGAGRPHIND:0x3
Field Name
GRPH_ROTATE
GRPH_FN_SEL
Bits
2:0
4:3
Default
0x0
0x0
Description
0=Replace
1=AND
2=OR
3=XOR
GRA04 - RW - 8 bits - VGAGRPHIND:0x4
Field Name
Bits
1:0
GRPH_RMAP
Default
0x0
Description
GRA05 - RW - 8 bits - VGAGRPHIND:0x5
Field Name
GRPH_WRITE_MODE
GRPH_READ1
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
1:0
Default
0x0
3
0x0
Description
0=Write mode 0
1=Write mode 1
2=Write mode 2
3=Write mode 3
0=Read mode 0, byte oriented
1=Read mode 1, pixel oriented
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-151
Video Graphics Array (VGA) Registers
CGA_ODDEVEN
4
0x0
GRPH_OES
5
0x0
GRPH_PACK
6
0x0
0=Disable Odd/Even Addressing
1=Enable Odd/Even Addressing
0=Linear shift mode
1=Tiled shift mode
0=Use shift register mode as per GRPH_OES
1=256 color mode, read as packed pixels, ignore
GRPH_OES
GRA06 - RW - 8 bits - VGAGRPHIND:0x6
Field Name
GRPH_GRAPHICS
GRPH_ODDEVEN
GRPH_ADRSEL
Bits
0
Default
0x0
1
0x0
3:2
0x0
Description
0=Alpha Numeric Mode
1=Graphics Mode
0=Normal
1=Chain Odd maps to Even
0=A0000-128K
1=A0000-64K
2=B0000-32K
3=B8000-32K
GRA07 - RW - 8 bits - VGAGRPHIND:0x7
Field Name
GRPH_XCARE0
Bits
0
Default
0x0
GRPH_XCARE1
1
0x0
GRPH_XCARE2
2
0x0
GRPH_XCARE3
3
0x0
Description
0=Ignore map 0
1=Use map 0 for read mode 1
0=Ignore map 1
1=Use map 1 for read mode 1
0=Ignore map 2
1=Use map 2 for read mode 1
0=Ignore map 3
1=Use map 3 for read mode 1
GRA08 - RW - 8 bits - VGAGRPHIND:0x8
GRPH_BMSK
2.6.6
Field Name
Bits
7:0
Default
0x0
Description
VGA Attribute Registers
ATTRX - RW - 8 bits - [GpuF0MMReg,VGA_IO:0x3C0]
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-152
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
Field Name
ATTR_IDX
ATTR_PAL_RW_ENB
Bits
4:0
Default
0x0
5
0x0
Attribute Index Register
Description
ATTR Index. This index points to one of the internal
registers of the attribute controller (ATTR) at addresses
0x3C1/0x3C0, for the next ATTR read/write operation.
Since both the index and data registers are at the same I/O,
a pointer to the registers is necessary. This pointer cna be
initialized to point to the index register by a read of GENS1.
Palette Address Source. After loading the colour palette,
this bit should be set to logical 1.
0=Processor to load
1=Memory data to access
ATTRDW - W - 8 bits - [GpuF0MMReg,VGA_IO:0x3C0]
Field Name
Bits
7:0
ATTR_DATA
Attribute Data Write Register
Default
0x0
Description
Attribute Data Write
ATTRDR - R - 8 bits - [GpuF0MMReg,VGA_IO:0x3C1]
Field Name
Bits
7:0
ATTR_DATA
Attribute Data Read Register
Default
0x0
Description
Attribute Data Read
ATTR00 - RW - 8 bits - VGAATTRIND:0x0
Field Name
Bits
5:0
ATTR_PAL
Default
0x0
Palette Register 0
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
ATTR01 - RW - 8 bits - VGAATTRIND:0x1
Field Name
ATTR_PAL
Palette Register 1
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
5:0
Default
0x0
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-153
Video Graphics Array (VGA) Registers
ATTR02 - RW - 8 bits - VGAATTRIND:0x2
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Palette Register 2
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
ATTR03 - RW - 8 bits - VGAATTRIND:0x3
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Palette Register 3
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
ATTR04 - RW - 8 bits - VGAATTRIND:0x4
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Palette Register 4
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
ATTR05 - RW - 8 bits - VGAATTRIND:0x5
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Palette Register 5
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
ATTR06 - RW - 8 bits - VGAATTRIND:0x6
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Palette Register 6
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-154
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
ATTR07 - RW - 8 bits - VGAATTRIND:0x7
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Palette Register 7
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
ATTR08 - RW - 8 bits - VGAATTRIND:0x8
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Palette Register 8
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
ATTR09 - RW - 8 bits - VGAATTRIND:0x9
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Palette Register 9
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
ATTR0A - RW - 8 bits - VGAATTRIND:0xA
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Palette Register Ah (10)
Field Name
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
ATTR0B - RW - 8 bits - VGAATTRIND:0xB
ATTR_PAL
Palette Register Bh (11)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
5:0
Default
0x0
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-155
Video Graphics Array (VGA) Registers
ATTR0C - RW - 8 bits - VGAATTRIND:0xC
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
Palette Register Ch (12)
ATTR0D - RW - 8 bits - VGAATTRIND:0xD
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
Palette Register Dh (13)
ATTR0E - RW - 8 bits - VGAATTRIND:0xE
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
Palette Register Eh (14)
ATTR0F - RW - 8 bits - VGAATTRIND:0xF
ATTR_PAL
Field Name
Bits
5:0
Default
0x0
Description
Colour Bits 5:0 map the text attribute or graphics colour
input value to a display colour on the screen. Colour is
disabled for those bits that are set to logical 0; enabled for
those bits set to logical 1.
Palette Register Fh (15)
ATTR10 - RW - 8 bits - VGAATTRIND:0x10
Field Name
ATTR_GRPH_MODE
Bits
0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-156
Description
Graphics/Alphanumeric Mode.
0=Alphanumeric Mode
1=Graphic Mode
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
ATTR_MONO_EN
1
0x0
ATTR_LGRPH_EN
2
0x0
ATTR_BLINK_EN
3
0x0
ATTR_PANTOPONLY
5
0x0
ATTR_PCLKBY2
6
0x0
ATTR_CSEL_EN
7
0x0
Mode Control Register
Monochrome/Colour Attributes Select:
0=Color Disp
1=Monochrome Disp
Line Graphics Enable. Must be 0 for character fonts that do
not use line graphics character codes for graphics. Zero will
force the 9th dot to the background colour. One will allow
the 8th bit of the line graphics characters to be stretched to
the 9th dot.
0=Disable line graphics 8th dot stretch
1=Enable line graphics 8th dot stretch
Blink Enable/Background Intensity:
Selects whether bit 7 of the attribute controls intensity or
blinking.
0=Intensity control
1=Blink control
PEL Panning Compatibility:
0=Pan both halves of the screen
1=Pan only the top half screen
PEL Clock Select:
0=Shift register clocked every dot clock
1=For mode 13 (256 colour), 8 bits packed to form a pixel
Alternate Colour Source:
0=Select ATTR00-0F bit 5:4 as P5 and P4
1=Select ATTR14 bit 1:0 as P5 and P4
ATTR11 - RW - 8 bits - VGAATTRIND:0x11
Field Name
Bits
7:0
ATTR_OVSC
Overscan Colour Register
Default
0x0
Overscan Colour
Description
ATTR12 - RW - 8 bits - VGAATTRIND:0x12
Field Name
ATTR_MAP_EN
Bits
3:0
Default
0x0
ATTR_VSMUX
5:4
0x0
Colour Map Enable Register
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Enable Colour Map bits.
0 = Disables data from respective map from being used for
video output.
1 = Enables data from respective map for use in video
output.
Video Status Mux bits 1:0. These are control bits for the
multiplexer on colour bits P0-P7. The bit selection is also
indicated at GENS1[5:4]:
00 = P2, P0
01 = P5, P4
10 = P3, P1
11 = P7, P6
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-157
Video Graphics Array (VGA) Registers
ATTR13 - RW - 8 bits - VGAATTRIND:0x13
ATTR_PPAN
Field Name
Bits
3:0
Default
0x0
Description
Shift Count Bits 3:0. The shift count value (0-8) indicates
how many pixle positions to shift left.
Count
Value
0
1
2
3
4
5
6
7
8
Shift in respective modes
0+,1+,2+,13
All other
3+,7,7+
1
0
2
3
1
4
5
2
6
7
3
8
0
-
0
1
2
3
4
5
6
7
-
Horizontal PEL Panning Register
ATTR14 - RW - 8 bits - VGAATTRIND:0x14
ATTR_CSEL1
Field Name
ATTR_CSEL2
Bits
1:0
Default
0x0
3:2
0x0
Description
Colour bits P5 and P4, respectively. These are the colour
output bits (instead of bits 5 and 4 of the internal palette
registers ATTR00-0F) when alternate colour source, bit
ATTR10[7] is logical 1.
Colour bits P7 and P6, respectively. These two bits are the
two high-order bits of the 8-bit colour, used for rapid colour
set switching (addressing different parts of the DAC colour
lookup table). The lower order bits are in registers
ATTR00-0F.
Colour Select Register
2.6.7
VGA Miscellaneous Registers
VGA_RENDER_CONTROL - RW - 32 bits - [GpuF0MMReg:0x300]
Field Name
VGA_BLINK_RATE
Bits
4:0
Default
0xf
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-158
Description
One less than the number of frames that the cursor remains
OFF = one less than the number of frames that the cursor
remains ON = one less than half the cursor blink period =
one less than a quarter of the character blink period.
If register set to 0 test mode will happen, blink counter is
reset and VGA_BLINK_MODE is followed,
if set to 1, as an exception, cursor blink will be ON one
frame, OFF one frame,
if set to 2, cursor blink will be ON three frames, OFF three
frames, etc
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
VGA_BLINK_MODE
6:5
0x0
VGA_CURSOR_BLINK_INVERT
7
0x0
VGA_EXTD_ADDR_COUNT_ENABLE
8
0x0
17:16
0x0
VGA_LOCK_8DOT
24
0x0
VGAREG_LINECMP_COMPATIBILITY_S
EL
25
0x0
VGA_VSTATUS_CNTL
VGA Render control Register
Determines whether the blinking sequence starts with
blinking characters and cursor visible or invisible. If
VGA_BLINK_RATE = 0 the frame remains static at the start
of the sequence.
0=Blinking sequence starts with blinking characters visible
and cursor visible
1=Blinking sequence starts with blinking characters visible
and cursor invisible
2=Blinking sequence starts with blinking characters
invisible and cursor visible
3=Blinking sequence starts with blinking characters
invisible and cursor invisible
Determines if the blinking characters toggle when the
cursor toggles from invisible to visible (default) or when the
cursor toggles from visible to invisible
0=Sequence is (regardless of where it starts) : blinking
chars visible and cursor visible, blinking chars visible and
cursor invisible, blinking chars invisible and cursor visible,
blinking chars invisible and cursor invisible, blinking chars
visible and cursor visible, ... etc . The starting point in the
sequence is determined by VGA_BLINK_MODE
1=Sequence is (regardless of where it starts) : blinking
chars visible and cursor visible, blinking chars invisible and
cursor invisible, blinking chars invisible and cursor visible,
blinking chars visible and cursor invisible, blinking chars
visible and cursor visible, ... etc. The starting point in the
sequence is determined by VGA_BLINK_MODE
Determines if the render will allow reading beyond 256K
0=Disable
1=Enable Extended Address Counter beyond 256K
controls the main state machine of the VGA render
0=VGA render disable (no VGA engine trigger enabled)
1=Use CRTC1 vblank to trigger VGA engine
2=Use CRTC2 vblank to trigger VGA engine
3=Use both CRTC1 and CRTC2 vblank to trigger VGA
engine
Determines if 9 dot text characters will be allowed or not
0=respect SEQ_DOT8 value
1=Force SEQ_DOT8 =1, VGA_CKSEL = 0 for
functionality
Selects point at which line compare is activated
0=line==line_cmp(default). As per VGA specification
1=line>line_cmp. As per legacy ATI VGA controllers
VGA_SEQUENCER_RESET_CONTROL - RW - 32 bits - [GpuF0MMReg:0x304]
Field Name
D1_BLANK_DISPLAY_WHEN_SEQUEN
CER_RESET
Bits
0
Default
0x1
D2_BLANK_DISPLAY_WHEN_SEQUEN
CER_RESET
4
0x1
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
controls wheter to blank the display 1 in a sequencer reset
0=Reseting Sequencer (SEQ00:SEQ_RST) has no effect
on Display Controller 1
1=Reseting Sequencer (SEQ00:SEQ_RST) blanks the
output of Display Controller 1
controls wheter to blank the display 1 in a sequencer reset
0=Reseting Sequencer (SEQ00:SEQ_RST) has no effect
on Display Controller 2
1=Reseting Sequencer (SEQ00:SEQ_RST) blanks the
output of Display Controller 2
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-159
Video Graphics Array (VGA) Registers
D1_DISABLE_SYNCS_AND_DE_WHEN
_SEQUENCER_RESET
8
0x1
D2_DISABLE_SYNCS_AND_DE_WHEN
_SEQUENCER_RESET
12
0x1
VGA_MODE_AUTO_TRIGGER_ENABLE
16
0x0
VGA_MODE_AUTO_TRIGGER_REGIST
ER_SELECT
17
0x0
VGA_MODE_AUTO_TRIGGER_INDEX_
SELECT
VGA sequencer reset control Register
23:18
0x0
controls wheter to disable syncs for display 1 in a
sequencer reset
0=Reseting Sequencer (SEQ00:SEQ_RST) has no effect
on Display Controller 1
1=Reseting Sequencer (SEQ00:SEQ_RST) disables
HSync, VSync, and DE on Display Controller 2
controls wheter to disable syncs for display 2 in a
sequencer reset
0=Reseting Sequencer (SEQ00:SEQ_RST) has no effect
on Display Controller 2
1=Reseting Sequencer (SEQ00:SEQ_RST) disables
HSync, VSync, and DE on Display Controller 2
enables the auto-trigger of the VGA mode in a VGA register
write
0=disable the auto-trigger mode
1=enable the auto-trigger mode
selects which register write to use for VGA mode
auto-trigger
0=GENFC_WT is used for auto-trigger
1=CRTC_DATA is used for auto-trigger, see
VGA_MODE_ENABLE_AUTO_TRIGGER_INDEX_SELEC
T
Selects which CRTC register write will trigger VGA mode
VGA_MODE_CONTROL - RW - 32 bits - [GpuF0MMReg:0x308]
Field Name
VGA_ATI_LINEAR
Bits
0
Default
0x0
VGA_LUT_PALETTE_UPDATE_MODE
5:4
0x0
VGA_128K_APERTURE_PAGING
8
0x0
VGA_TEXT_132_COLUMNS_EN
16
0x0
VGA mode control register
Description
Sets linear mode for VESA modes
0=Disable
1=Enable
Determines how VGA DAC palette updates affect the LUT
palette
0=VGA DAC palette writes do not update LUT palette
1=VGA DAC palette writes updata LUTA palette
2=VGA DAC palette writes update LUTB palette
3=reserved
Controls wether the B0000 to BFFFF aperture will wrap on
top of the A0000 to AFFFF aperture
0=Normal
1=Enable
Controls 132 column text
0=inActive
1=Active
VGA_SURFACE_PITCH_SELECT - RW - 32 bits - [GpuF0MMReg:0x30C]
Field Name
VGA_SURFACE_PITCH_SELECT
Bits
1:0
Default
0x2
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-160
Description
Selects the pitch of the display buffer
0=768 pixels
1=1024 pixels
2=1280 pixels
3=1408 pixels
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
VGA_SURFACE_HEIGHT_SELECT
9:8
0x0
Selects the height of the display buffer
0=768 lines
1=1024 lines
2=1280 lines
3=1408 lines
display buffer pitch Register
VGA_MEMORY_BASE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x310]
Field Name
VGA_MEMORY_BASE_ADDRESS
Bits
31:0
Default
0x0
Description
Base address of the 32 Meg area that the VGAHDP and
VGARENDER access
NOTE: Bits 0:24 of this field are hardwired to ZERO.
VGA Base address Register
VGA_DISPBUF1_SURFACE_ADDR - RW - 32 bits - [GpuF0MMReg:0x318]
Field Name
VGA_DISPBUF1_SURFACE_ADDR
Bits
24:0
Default
0x0
Description
Base address of display 1 buffer within the 32 Meg defined
by VGA_MEMORY_BASE_ADDRESS
NOTE: Bits 0:19 of this field are hardwired to ZERO.
display 1 buffer base address
VGA_DISPBUF2_SURFACE_ADDR - RW - 32 bits - [GpuF0MMReg:0x320]
Field Name
VGA_DISPBUF2_SURFACE_ADDR
Bits
24:0
Default
0x0
Description
Base address of display 2 buffer within the 32 Meg defined
by VGA_MEMORY_BASE_ADDRESS
NOTE: Bits 0:19 of this field are hardwired to ZERO.
display 2 buffer base address
VGA_HDP_CONTROL - RW - 32 bits - [GpuF0MMReg:0x328]
Field Name
VGA_MEM_PAGE_SELECT_EN
VGA_MEMORY_DISABLE
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
4
0x0
Description
Enables write and read paging
0=Don't use VGA_MEM_WRITE_PAGE_ADDR and
VGA_MEM_READ_PAGE_ADDR registers
1=Use VGA_MEM_WRITE_PAGE_ADDR and
VGA_MEM_READPAGE_ADDR registers
Disables the VGA memory: required by Longhorn
0=Do not disable
1=ignore writes and return zero for the reads without
affecting the read latch
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-161
Video Graphics Array (VGA) Registers
VGA_RBBM_LOCK_DISABLE
8
0x0
VGA_SOFT_RESET
16
0x0
VGA_TEST_RESET_CONTROL
VGAHDP control register
24
0x0
Disables the lock that holds register writes while the
memory pipe is full
0=The RBBM write requests will be held untile the data
pipe is idle.
1=The RBBM write requests will not be held.
Does soft reset for VGA, does not reset the registers
0=VGA running in normal operating mode
1=Soft Reset to VGA
Not used
VGA_CACHE_CONTROL - RW - 32 bits - [GpuF0MMReg:0x32C]
Field Name
VGA_WRITE_THROUGH_CACHE_DIS
Bits
0
Default
0x0
VGA_READ_CACHE_DISABLE
8
0x0
VGA_READ_BUFFER_INVALIDATE
16
0x0
VGA_DCCIF_W256ONLY
20
0x0
29:24
0x0
VGA_DCCIF_WC_TIMEOUT
VGAHDP caching and VGADCCIF write combining control register
Field Name
D1VGA_MODE_ENABLE
Description
Disables the snooping of memory writes into the read buffer
0=Writes that hit the read cache will update it
1=Writes will invalidate the read cache
Disables the read buffer
0=reads taken from cache, if possible.
1=reads always sent to memory.
Everytime this bit is written with a '1' the VGA read buffer
invalidates for coherency purposes
Controls whether the write requests from VGADCC to MH
will be always 256 bits or optimized for 128 or 256 bit
0=Optimized for 128 or 256 bits
1=Always 256 bits
DCCIF write combiner timeout. If there is write inactivity,
this field defines the number of SCLKs to wait before
flushing write combiner. Minimun value is 9.
D1VGA_CONTROL - RW - 32 bits - [GpuF0MMReg:0x330]
Bits
0
Default
0x0
D1VGA_TIMING_SELECT
8
0x0
D1VGA_SYNC_POLARITY_SELECT
9
0x0
D1VGA_OVERSCAN_TIMING_SELECT
10
0x1
D1VGA_OVERSCAN_COLOR_EN
16
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-162
Description
Controls whether display 1 serves the VGA or not
0=VGA display 1 disabled
1=VGA display 1 enabled
Controls whether display 1 uses the VGA or extended
timing parameters
0=display 1 uses extended timing
1=display 1 uses VGA timing
Controls whether display 1 uses the VGA or extended sync
polarities
0=display 1 uses extended sync polarity
1=display 1 uses VGA sync polarity
Controls whether display 1 uses the VGA or extended
overscan timing. Only followed if
D1VGA_TIMING_SELECT=1
0=display 1 uses extended overscan timing
1=display 1 uses VGA overscan timing
Controls whether display 1 uses the VGA or extended
overscan color
0=display 1 uses CRTC register for overscan color
1=display 1 uses VGA register for overscan color
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
D1VGA_ROTATE
25:24
0x0
Controls rotation, only looked at if
D1VGA_TIMING_SELECT =0
0=no rotation, displays do not interchange
VGA_DISP_h_disp_width and VGA_DISP_v_disp_height
parameters
1=rotation 90 degrees, displays do interchange
VGA_DISP_h_disp_width and VGA_DISP_v_disp_height
parameters
2=rotation 180 degrees, displays do not interchange
VGA_DISP_h_disp_width and VGA_DISP_v_disp_height
parameters
3=rotation 270 degrees, displays do interchange
VGA_DISP_h_disp_width and VGA_DISP_v_disp_height
parameters
VGA-Display1 interface control register
D2VGA_CONTROL - RW - 32 bits - [GpuF0MMReg:0x338]
Field Name
D2VGA_MODE_ENABLE
Bits
0
Default
0x0
D2VGA_TIMING_SELECT
8
0x0
D2VGA_SYNC_POLARITY_SELECT
9
0x0
D2VGA_OVERSCAN_TIMING_SELECT
10
0x1
D2VGA_OVERSCAN_COLOR_EN
16
0x0
25:24
0x0
D2VGA_ROTATE
(mirror of
D1VGA_CONTROL:D1VGA_ROTATE)
Description
Controls whether display 2 serves the VGA or not
0=VGA display 2 disabled
1=VGA display 2 enabled
Controls whether display 2 uses the VGA or extended
timing parameters
0=display 2 uses extended timing
1=display 2 uses VGA timing
Controls whether display 2 uses the VGA or extended sync
polarities
0=display 2 uses extended sync polarity
1=display 2 uses VGA sync polarity
Controls whether display 2 uses the VGA or extended
overscan timing. Only followed if
D2VGA_TIMING_SELECT=1
0=display 2 uses extended overscan timing
1=display 2 uses VGA overscan timing
Controls whether display 2 uses the VGA or extended
overscan color
0=display 2 uses CRTC register for overscan color
1=display 2 uses VGA register for overscan color
Controls rotation, only looked at if
D2VGA_TIMING_SELECT=0
0=no rotation, displays do not interchange
VGA_DISP_h_disp_width and VGA_DISP_v_disp_height
parameters
1=rotation 90 degrees, displays do interchange
VGA_DISP_h_disp_width and VGA_DISP_v_disp_height
parameters
2=rotation 180 degrees, displays do not interchange
VGA_DISP_h_disp_width and VGA_DISP_v_disp_height
parameters
3=rotation 270 degrees, displays do interchange
VGA_DISP_h_disp_width and VGA_DISP_v_disp_height
parameters
VGA-Display2 interface control register
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-163
Video Graphics Array (VGA) Registers
VGA_HW_DEBUG - RW - 32 bits - [GpuF0MMReg:0x33C]
Field Name
VGA_HW_DEBUG
Bits
31:0
Default
0x0
Description
VGA_STATUS - RW - 32 bits - [GpuF0MMReg:0x340]
Field Name
VGA_MEM_ACCESS_STATUS (R)
Bits
0
Default
0x0
VGA_REG_ACCESS_STATUS (R)
1
0x0
VGA_DISPLAY_SWITCH_STATUS (R)
2
0x0
VGA_MODE_AUTO_TRIGGER_STATUS
(R)
3
0x0
VGA status register
Description
Memory access status
0=No event
1=Event has occurred, interrupting if enabled
Register access status
0=No event
1=Event has occurred, interrupting if enabled
Display switch status
0=No event
1=Event has occurred, interrupting if enabled
VGA mode auto trigger status
0=No event
1=Event has occurred, interrupting if enabled
VGA_INTERRUPT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x344]
Field Name
VGA_MEM_ACCESS_INT_MASK
Bits
0
Default
0x0
VGA_REG_ACCESS_INT_MASK
8
0x0
VGA_DISPLAY_SWITCH_INT_MASK
16
0x0
VGA_MODE_AUTO_TRIGGER_INT_MA
SK
24
0x0
VGA interrupt mask register
Description
Enables the interrupt for the Memory access status
0=Disable the interrupt which is set when VGA memory is
written or read
1=Enable the interrupt which is set when VGA memory is
written or read
Enables the interrupt for the register access status
0=Disable the interrupt which is set when the standard
VGA registers are written or read
1=Enable the interrupt which is set when the standard
VGA registers are written or read
Enables the interrupt for the Display switch status
0=Disable the interrupt which is set when the VGA render
switches display buffers
1=Enable the interrupt which is set when the VGA render
switches display buffers
Enables the interrupt for VGA mode auto trigger
0=Disable the interrupt which is set when VGA mode is
auto-triggered
1=Enable the interrupt which is set when VGA mode is
auto-triggered
VGA_STATUS_CLEAR - RW - 32 bits - [GpuF0MMReg:0x348]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-164
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
VGA_MEM_ACCESS_INT_CLEAR (W)
0
0x0
VGA_REG_ACCESS_INT_CLEAR (W)
8
0x0
VGA_DISPLAY_SWITCH_INT_CLEAR
(W)
16
0x0
VGA_MODE_AUTO_TRIGGER_INT_CLE
AR (W)
24
0x0
Clears the Memory access interrupt
0=No effect
1=Clear status
Clears the register access interrupt
0=No effect
1=Clear status
Clears the display switch interrupt
0=No effect
1=Clear status
Clears the VGA mode auto trigger interrupt
0=No effect
1=Clear status
VGA interrupt clear register
VGA_INTERRUPT_STATUS - RW - 32 bits - [GpuF0MMReg:0x34C]
Field Name
VGA_MEM_ACCESS_INT_STATUS (R)
Bits
0
Default
0x0
VGA_REG_ACCESS_INT_STATUS (R)
1
0x0
VGA_DISPLAY_SWITCH_INT_STATUS
(R)
2
0x0
VGA_MODE_AUTO_TRIGGER_INT_STA
TUS (R)
3
0x0
VGA Interrupt status register
Field Name
VGA_CRTC_TIMEOUT
Description
Memory access interrupt status
0=No event
1=Event has occurred
Register access interrupt status
0=No event
1=Event has occurred
Display switch interrupt status
0=No event
1=Event has occurred
VGA mode auto trigger interrupt status
0=No event
1=Event has occurred
VGA_MAIN_CONTROL - RW - 32 bits - [GpuF0MMReg:0x350]
VGA_RENDER_TIMEOUT_COUNT
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
1:0
Default
0x0
4:3
0x3
Description
Controls whether and in what conditions the vga crtc
calculations will be forced to start if the VBLANK from
display takes too long to come
0=VGACRTC times out and is restarted after 1/50 sec
without VBLANK
1=VGACRTC times out and is restarted after 1/10 sec
without VBLANK
2=reserved
3=VGACRTC does not timeout
Controls whether and in how many display frames the vga
render will be forced to finish or timeout
0=No timeout
1=2 frame
2=3 frames
3=4 frames
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-165
Video Graphics Array (VGA) Registers
VGA_VIRTUAL_VERTICAL_RETRACE_
DURATION
7:5
0x0
VGA_READBACK_VGA_VSTATUS_SOU
RCE_SELECT
9:8
0x0
VGA_READBACK_NO_DISPLAY_SOUR
CE_SELECT
17:16
0x0
VGA_READBACK_CRT_INTR_SOURCE
_SELECT
25:24
0x0
VGA_READBACK_SENSE_SWITCH_SE
LECT
26
0x0
VGA_READ_URGENT_ENABLE
27
0x0
VGA_WRITES_URGENT_ENABLE
28
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-166
specifies the duration of the vga main state machine of the
vga render virtual vertical retrace
0=256 us
1=512 us
2=768 us
3=1024 us
4=1280 us
5=1536 us
6=1792 us
7=2048 us
selects the source for the VGA_VSTATUS readback
register bit
0=Uses vga main render state machine virtual vertical
retrace - a timer is used to make the duration equivalent as
specified by
VGA_VIRTUAL_VERTICAL_RETRACE_DURATION
1=reserved
2=Uses CRTC1 vblank signal
3=Uses CRTC2 vblank signal
selects the source for the NO_DISPLAY readback register
bit
0=Uses vga main render state machine virtual vertical
retrace - a timer is used to make the duration specified by
VGA_VIRTUAL_VERTICAL_RETRACE_DURATION.
Outside of the virtual vertical retrace we have a 31.25 KHz,
5/32 duty cycle pulse train generated independently by a
timer asynchronous to the virtual vertical retrace, roughly
equivalent to standard horizontal retrace times in standard
VGA timings
1=Uses the time the vga render is not rendering. Outside
of this time we have a 31.25 kHz pulse train of 5/32 duty
cycle, asynchronous to the time the render is rendering and
generated independently
2=Uses CRTC1 nodisplay signal
3=Uses CRTC2 nodisplay signal
selects the source for the CRT_INTR readback register bit
and associated interrupt
0=Uses vga main render state machine virtual vertical
retrace
1=reserved
2=Uses CRTC1 vblank signal
3=Uses CRTC2 vblank signal
selects the source for the SENSE_SWITCH readback
register bit
0=Uses CRTC1 sense_switch signal
1=Uses CRTC2 sense_switch signal
Urgent/stall bit for vga hdp and vga render reads
0=vga hdp and vga render reads not urgent
1=vga hdp and vga render reads urgent
0=vga hdp and vga render writes not urgent
1=vga hdp and vga render writes urgent
© 2007 Advanced Micro Devices, Inc.
Proprietary
Video Graphics Array (VGA) Registers
VGA_MAIN_TEST_VSTATUS_NO_DISP
LAY_CRTC_TIMEOUT
31
0x0
VGA Main control
For testing purposes, makes the virtual vertical retrace, the
crtc timeout and the virtual no display horizontal pulses
faster by using the engine clock frequency instead of 1MHz
reference
0=VGACRTC timeout is as indicated by
VGA_CRTC_TIMEOUT, virtual vertical retrace duration is
as indicated by
VGA_VIRTUAL_VERTICAL_RETRACE_DURATION,
virtual no display horizontal pulses are 31.25 KHz if
VGA_READBACK_NO_DISPLAY_SOURCE_SELECT is
zero
1=VGACRTC timeout is one 400th of what is indicated by
VGA_CRTC_TIMEOUT, virtual vertical retrace duration one
400th of what is indicated by
VGA_VIRTUAL_VERTICAL_RETRACE_DURATION,
virtual no display horizontal pulses are 400*31.25 KHz if
VGA_READBACK_NO_DISPLAY_SOURCE_SELECT is
zero
VGA_TEST_CONTROL - RW - 32 bits - [GpuF0MMReg:0x354]
Field Name
VGA_TEST_ENABLE
Bits
0
Default
0x0
VGA_TEST_RENDER_START
8
0x0
VGA_TEST_RENDER_DONE (R)
16
0x0
VGA_TEST_RENDER_DISPBUF_SELEC
T
24
0x0
VGA test control register
Description
Controls wether the vga render looks at vertical blank
signals from the displays to start rendering or will start
through a register write
0=Render responds to status signals from DISP1, DISP2
1=Render responds to VGA_TEST_RENDER_START
Starts the vga render
0=No event
1=Every time this is written with a high, if
VGA_TEST_ENABLE is set, VGA Rendering starts
Signals when the vga render is done rendering
0=No event
1=If VGA_TEST_ENABLE is set, VGA Rendering is done
Selects to which display buffer the render will render in test
mode (VGA_TEST_ENABLE=1)
0=VGA Render will write into DISPBUF1 starting at
VGA_DISPBUF1_SURFACE_ADDR
1=VGA Render will write into DISPBUF2 starting at
VGA_DISPBUF2_SURFACE_ADDR
VGA_DEBUG_READBACK_INDEX - RW - 32 bits - [GpuF0MMReg:0x358]
Field Name
VGA_DEBUG_READBACK_INDEX
VGA debug readback index register
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
7:0
Default
0x0
Description
Index for the VGA debug readback
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-167
Video Graphics Array (VGA) Registers
VGA_DEBUG_READBACK_DATA - RW - 32 bits - [GpuF0MMReg:0x35C]
Field Name
VGA_DEBUG_READBACK_DATA (R)
Bits
31:0
Default
0x0
VGA debug readback data register
Description
According to the value of
VGA_DEBUG_READBACK_INDEX,
VGA_DEBUG_READBACK_DATA will have this values:
0: VGAREG_DISP_h_total[10:0]
1: VGAREG_DISP_h_sync_end[10:0]
2: VGAREG_DISP_h_disp_start[10:0]
3: VGAREG_DISP_h_disp_width[10:0]
4: VGAREG_DISP_h_blank_start[10:0]
5: VGAREG_DISP_h_blank_end[10:0]
6: VGAREG_DISP_v_total[10:0]
7: VGAREG_DISP_v_sync_end[10:0]
8: VGAREG_DISP_v_disp_start[10:0]
9: VGAREG_DISP_v_disp_height[10:0]
10: VGAREG_DISP_v_blank_start[10:0]
11: VGAREG_DISP_v_blank_end[10:0]
12: VGAREG_DISP_overscan_colorR[5:0]
13: VGAREG_DISP_overscan_colorG[5:0]
14: VGAREG_DISP_overscan_colorB[5:0]
15: reserved
16 VGA_DISP_viewport_x_start
17 VGA_DISP_viewport_y_start
VGA_MEM_WRITE_PAGE_ADDR - RW - 32 bits - [GpuF0MMReg,GpuIOReg:0x48]
Field Name
VGA_MEM_WRITE_PAGE0_ADDR
VGA_MEM_WRITE_PAGE1_ADDR
VGA write page register
Bits
9:0
25:16
Default
0x0
0x0
Write page 0 address
Write page 1 address
Description
VGA_MEM_READ_PAGE_ADDR - RW - 32 bits - [GpuF0MMReg,GpuIOReg:0x4C]
Field Name
VGA_MEM_READ_PAGE0_ADDR
VGA_MEM_READ_PAGE1_ADDR
VGA read page register
Bits
9:0
25:16
Default
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-168
Description
Read page 0 address
Read page 1 address
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
2.7
Display Controller Registers
2.7.1
Primary Display Graphics Control Registers
D1GRPH_ENABLE - RW - 32 bits - [GpuF0MMReg:0x6100]
Field Name
D1GRPH_ENABLE
Bits
0
Default
0x1
Primary graphic enabled.
Description
Primary graphic enabled.
0=disable
1=enable
D1GRPH_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6104]
Field Name
D1GRPH_DEPTH
Bits
1:0
Default
0x0
D1GRPH_Z
D1GRPH_FORMAT
5:4
10:8
0x0
0x0
D1GRPH_TILE_COMPACT_EN
© 2007 Advanced Micro Devices, Inc.
Proprietary
12
0x0
Description
Primary graphic pixel depth.
0=8bpp
1=16bpp
2=32bpp
3=64bpp
Z[1:0] value for tiling
Primary graphic pixel format. It is used together with
D1GRPH_DEPTH to define the graphic pixel format.
If (D1GRPH_DEPTH = 0x0)(8 bpp)
0x0 - indexed
others - reserved
else if (D1GRPH_DEPTH = 0x1)(16 bpp)
0x0 - ARGB 1555
0x1 - RGB 565
0x2 - ARGB 4444
0x3 - Alpha index 88
0x4 - monochrome 16
0x5 - BGRA 5551
others - reserved
else if (D1GRPH_DEPTH = 0x2)(32 bpp)
0x0 - ARGB 8888
0x1 - ARGB 2101010
0x2 - 32bpp digital output
0x3 - 8-bit ARGB 2101010
0x4 - BGRA 1010102
0x5 - 8-bit BGRA 1010102
0x6 - RGB 111110
0x7 - BGR 101111
others - reserved
else if (D1GRPH_DEPTH = 0x3)(64 bpp)
0x0 - ARGB 16161616
0x1 - 64bpp digital output ARGB[13:2]
0x2 - 64bpp digital output RGB[15:0]
0x3 - 64bpp digital output ARGB[11:0]
0x4 - 64bpp digital output BGR[15:0]
others - reserved
Enables multichip tile compaction
0=Disable
1=Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-169
Display Controller Registers
D1GRPH_ADDRESS_TRANSLATION_E
NABLE
16
0x0
D1GRPH_PRIVILEGED_ACCESS_ENAB
LE
17
0x0
D1GRPH_ARRAY_MODE
23:20
0x0
D1GRPH_16BIT_ALPHA_MODE
25:24
0x0
D1GRPH_16BIT_FIXED_ALPHA_RANG
E
30:28
0x0
Enables display 1 address translation
0=0=physical memory
1=1=virtual memory
Enables display 1 privileged page access
0=0=no priveledged access
1=1=priveledged access
Defines the tiling mode
0=ARRAY_LINEAR_GENERAL: Unaligned linear array
1=ARRAY_LINEAR_ALIGNED: Aligned linear array
2=ARRAY_1D_TILED_THIN1: Uses 1D 8x8x1 tiles
3=ARRAY_1D_TILED_THICK: Uses 1D 8x8x4 tiles
4=ARRAY_2D_TILED_THIN1: Uses 8x8x1 macro-tiles
5=ARRAY_2D_TILED_THIN2: Macro-tiles are 2x high
6=ARRAY_2D_TILED_THIN4: Macro-tiles are 4x high
7=ARRAY_2D_TILED_THICK: Uses 8x8x4 macro-tiles
8=ARRAY_2B_TILED_THIN1: uses row bank swapping
9=ARRAY_2B_TILED_THIN2: uses row bank swapping
10=ARRAY_2B_TILED_THIN4: uses row bank swapping
11=ARRAY_2B_TILED_THICK: uses row bank swapping
12=ARRAY_3D_TILED_THIN1: Slices are pipe rotated
13=ARRAY_3D_TILED_THICK: Slices are pipe rotated
14=ARRAY_3B_TILED_THIN1: Slices are pipe rotated
15=ARRAY_3B_TILED_THICK: Slices are pipe rotated
This field is only used if 64 bpp graphics bit depth and
graphics/overlay blend using per-pixel alpha from graphics
channel. It is used for processing 16 bit alpha. The fixed
point graphics alpha value in the frame buffer is always
clamped to 0.0 - 1.0 data range.
0x0 - Floating point alpha (1 sign bit, 5 bit exponent, 10 bit
mantissa)
0x1 - Fixed point alpha with normalization from 256/256 to
255/255 to represent 1.0
0x2 - Fixed point alpha with no normalization
0x3 - Fixed point alpha using lower 8 bits of frame buffer
value, no normalization
This register field is only used if 64 bpp graphics bit depth
and D1GRPH_16BIT_ALPHA_MODE = 01 or 10. Also only
used if graphics/overlay blend using per-pixel alpha from
graphics channel. Final alpha blend value is rounded to 8
bits after optional normalization step (see
D1GRPH_16BIT_ALPHA_MODE).
0x0 - Use bits 15:0 of input alpha value for blend alpha
0x1 - Use bits 14:0 of input alpha value for blend alpha
0x2 - Use bits 13:0 of input alpha value for blend alpha
0x3 - Use bits 12:0 of input alpha value for blend alpha
0x4 - Use bits 11:0 of input alpha value for blend alpha
0x5 - Use bits 10:0 of input alpha value for blend alpha
0x6 - Use bits 9:0 of input alpha value for blend alpha
0x7 - Use bits 8:0 of input alpha value for blend alpha
Primary graphic pixel depth and format.
D1GRPH_LUT_SEL - RW - 32 bits - [GpuF0MMReg:0x6108]
Field Name
D1GRPH_LUT_SEL
Bits
0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-170
Description
Primary graphic LUT selection.
0=select LUTA
1=select LUTB
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1GRPH_LUT_10BIT_BYPASS_EN
8
0x0
D1GRPH_LUT_10BIT_BYPASS_DBL_B
UF_EN
16
0x0
Primary graphic LUT selection.
Enable bypass primary graphic LUT for 2101010 format
0=Use LUT
1=Bypass LUT when in 2101010 format. Ignored for other
formats
Enable double buffer D1GRPH_LUT_10BIT_BYPASS_EN
0=D1GRPH_LUT_10BIT_BYPASS_EN take effect right
away
1=D1GRPH_LUT_10BIT_BYPASS_EN are double
buffered
D1GRPH_SWAP_CNTL - RW - 32 bits - [GpuF0MMReg:0x610C]
Field Name
D1GRPH_ENDIAN_SWAP
Bits
1:0
Default
0x0
D1GRPH_RED_CROSSBAR
5:4
0x0
D1GRPH_GREEN_CROSSBAR
7:6
0x0
D1GRPH_BLUE_CROSSBAR
9:8
0x0
11:10
0x0
D1GRPH_ALPHA_CROSSBAR
Description
MC endian swap select
0=0=none
1=1=8in16(0xaabb=>0xbbaa)
2=2=8in32(0xaabbccdd=>0xddccbbaa)
3=3=8in64(0xaabbccddeeff0011=>0x1100ffeeddccbbaa)
Red crossbar select
0=0=select from R
1=1=select from G
2=2=select from B
3=3=select from A
Green crossbar select
0=0=select from G
1=1=select from B
2=2=select from A
3=3=select from R
Blue crossbar select
0=0=select from B
1=1=select from A
2=2=select from R
3=3=select from G
Alpha crossbar select
0=0=select from A
1=1=select from R
2=2=select from G
3=3=select from B
Endian swap and component reorder control
D1GRPH_PRIMARY_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6110]
Field Name
D1GRPH_PRIMARY_DFQ_ENABLE
Bits
0
D1GRPH_PRIMARY_SURFACE_ADDRE
31:8
SS
Primary surface address for primary graphics in byte.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Default
0x0
0x0
Description
Primary surface address DFQ enable
0=0 = one deep queue mode
1=1 = DFQ mode
Primary surface address for primary graphics in byte. It is
256 byte aligned.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-171
Display Controller Registers
D1GRPH_SECONDARY_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6118]
Field Name
D1GRPH_SECONDARY_DFQ_ENABLE
Bits
0
Default
0x0
(mirror of
D1GRPH_PRIMARY_SURFACE_ADDRESS:D
1GRPH_PRIMARY_DFQ_ENABLE)
D1GRPH_SECONDARY_SURFACE_AD
31:8
DRESS
Secondary surface address for primary graphics in byte.
0x0
Description
Secondary surface address DFQ enable
0=0 = one deep queue mode
1=1 = DFQ mode
Secondary surface address for primary graphics in byte. It
is 256 byte aligned.
D1GRPH_PITCH - RW - 32 bits - [GpuF0MMReg:0x6120]
Field Name
D1GRPH_PITCH
Bits
13:0
Default
0x0
Description
Primary graphic surface pitch in pixels. For
Micro-tiled/Macro-tiled surface, it must be multiple of 64
pixeld in 8bpp mode. For Micro-linear/Macro-tiled surface, it
must be multiple of 256 pixeld in 8bpp mode, multiple of 128
pixels in 16bpp mode and multiple of 64 pixels in 32bpp
mode. For Micro-linear/Macro-linear surface, it must be
multiple of 64 pixels in 8bpp mode. For other modes, it must
be multiple of 32.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
Primary graphic surface pitch in pixels.
D1GRPH_SURFACE_OFFSET_X - RW - 32 bits - [GpuF0MMReg:0x6124]
Field Name
D1GRPH_SURFACE_OFFSET_X
Bits
12:0
Default
0x0
Description
Primary graphic X surface offset. It is 256 pixels aligned.
NOTE: Bits 0:7 of this field are hardwired to ZERO.
Primary graphic X surface offset.
D1GRPH_SURFACE_OFFSET_Y - RW - 32 bits - [GpuF0MMReg:0x6128]
Field Name
D1GRPH_SURFACE_OFFSET_Y
Bits
12:0
Default
0x0
Description
Primary graphic Y surface offset. It must be even value
NOTE: Bit 0 of this field is hardwired to ZERO.
Primary graphic Y surface offset.
D1GRPH_X_START - RW - 32 bits - [GpuF0MMReg:0x612C]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-172
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1GRPH_X_START
12:0
0x0
Primary graphic X start coordinate relative to the desktop
coordinates.
Primary graphic X start coordinate relative to the desktop coordinates.
D1GRPH_Y_START - RW - 32 bits - [GpuF0MMReg:0x6130]
Field Name
D1GRPH_Y_START
Bits
12:0
Default
0x0
Description
Primary graphic Y start coordinate relative to the desktop
coordinates.
Primary graphic Y start coordinate relative to the desktop coordinates.
D1GRPH_X_END - RW - 32 bits - [GpuF0MMReg:0x6134]
Field Name
D1GRPH_X_END
Bits
13:0
Default
0x0
Description
Primary graphic X end coordinate relative to the desktop
coordinates. It is exclusive and the maximum value is 8K
Primary graphic X end coordinate relative to the desktop coordinates.
D1GRPH_Y_END - RW - 32 bits - [GpuF0MMReg:0x6138]
Field Name
D1GRPH_Y_END
Bits
13:0
Default
0x0
Description
Primary graphic Y end coordinate relative to the desktop
coordinates. It is exclusive and the maximum value is 8K
Primary graphic Y end coordinate relative to the desktop coordinates.
D1GRPH_UPDATE - RW - 32 bits - [GpuF0MMReg:0x6144]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-173
Display Controller Registers
D1GRPH_MODE_UPDATE_PENDING
(R)
0
0x0
Primary graphic mode register update pending control. It is
set to 1 after a host write to graphics mode register. It is
cleared after double buffering is done.
This signal is only visible through register.
The graphics surface register includes:
D1GRPH_DEPTH
D1GRPH_FORMAT
D1GRPH_SWAP_RB
D1GRPH_LUT_SEL
D1GRPH_LUT_10BIT_BYPASS_EN
D1GRPH_ENABLE
D1GRPH_X_START
D1GRPH_Y_START
D1GRPH_X_END
D1GRPH_Y_END
D1GRPH_MODE_UPDATE_TAKEN (R)
1
0x0
D1GRPH_SURFACE_UPDATE_PENDIN
G (R)
2
0x0
The mode register double buffering can only occur at
vertical retrace. The double buffering occurs when
D1GRPH_MODE_UPDATE_PENDING = 1 and
D1GRPH_UPDATE_LOCK = 0 and V_UPDATE = 1.
If CRTC1 is disabled, the registers will be updated instantly.
0=No update pending
1=Update pending
Primary graphics update taken status for mode registers. It
is set to 1 when double buffering occurs and cleared when
V_UPDATE = 0.
Primary graphic surface register update pending control. If it
is set to 1 after a host write to graphics surface register. It is
cleared after double buffering is done. It is cleared after
double buffering is done.
This signal also goes to both the RBBM wait_until and to
the CP_RTS_discrete inputs.
The graphics surface register includes:
D1GRPH_PRIMARY_SURFACE_ADDRESS
D1GRPH_SECONDARY_SURFACE_ADDRESS
D1GRPH_PITCH
D1GRPH_SURFACE_OFFSET_X
D1GRPH_SURFACE_OFFSET_Y.
D1GRPH_SURFACE_UPDATE_TAKEN
(R)
3
0x0
D1GRPH_UPDATE_LOCK
16
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-174
If D1GRPH_SURFACE_UPDATE_H_RETRACE_EN = 0,
the double buffering occurs in vertical retrace when
D1GRPH_SURFACE_UPDATE_PENDING = 1 and
D1GRPH_UPDATE_LOCK = 0 and V_UPDATE = 1.
Otherwise the double buffering happens at horizontal
retrace when D1GRPH_SURFACE_UPDATE_PENDING =
1 and D1GRPH_UPDATE_LOCK = 0 and Data request for
last chunk of the line is sent from DCP to DMIF.
If CRTC1 is disabled, the registers will be updated instantly
Primary graphics update taken status for surface registers.
If D1GRPH_SURFACE_UPDATE_H_RETRACE_EN = 0, it
is set to 1 when double buffering occurs and cleared when
V_UPDATE = 0. Otherwise, it is active for one clock cycle
when double buffering occurs at the horizontal retrace.
Primary graphic register update lock control. This lock bit
control both surface and mode register double buffer
0=Unlocked
1=Locked
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1GRPH_MODE_DISABLE_MULTIPLE_
UPDATE
24
0x0
D1GRPH_SURFACE_DISABLE_MULTIP
LE_UPDATE
28
0x0
0=D1GRPH mode registers can be updated multiple times
in one V_UPDATE period
1=D1GRPH mode registers can only be updated once in
one V_UPDATE period
0=D1GRPH surface registers can be updated multiple
times in one V_UPDATE period
1=D1GRPH surface registers can only be updated once in
one V_UPDATE period
Primary graphic update control
D1GRPH_FLIP_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6148]
Field Name
D1GRPH_SURFACE_UPDATE_H_RETR
ACE_EN
Bits
0
Default
0x0
Description
Enable primary graphic surface register double buffer in
horizontal retrace.
0=Vertical retrace flipping
1=Horizontal retrace flipping
Enable primary graphic surface register double buffer in horizontal retrace
D1GRPH_SURFACE_ADDRESS_INUSE - RW - 32 bits - [GpuF0MMReg:0x614C]
Field Name
D1GRPH_SURFACE_ADDRESS_INUSE
(R)
Bits
31:8
Default
0x0
Description
This register reads back snapshot of primary graphics
surface address used for data request. The address is the
signal sent to DMIF and is updated on SOF or horizontal
surface update. The snapshot is triggered by writing 1 into
field D1CRTC_SNAPSHOT_MANUAL_TRIGGER of CRTC
register D1CRTC_SNAPSHOT_STATUS.
Snapshot of primary graphics surface address in use
2.7.2
Primary Display Video Overlay Control Registers
D1OVL_ENABLE - RW - 32 bits - [GpuF0MMReg:0x6180]
Field Name
D1OVL_ENABLE
Bits
0
Default
0x0
Description
Primary overlay enabled.
0=disable
1=enable
Primary overlay enabled.
D1OVL_CONTROL1 - RW - 32 bits - [GpuF0MMReg:0x6184]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-175
Display Controller Registers
D1OVL_DEPTH
1:0
0x0
D1OVL_Z
D1OVL_FORMAT
5:4
10:8
0x0
0x0
D1OVL_TILE_COMPACT_EN
12
0x0
D1OVL_ADDRESS_TRANSLATION_EN
ABLE
16
0x0
D1OVL_PRIVILEGED_ACCESS_ENABL
E
17
0x0
23:20
0x0
24
0x0
D1OVL_ARRAY_MODE
D1OVL_COLOR_EXPANSION_MODE
Primary overlay pixel depth
0=reserved
1=16bpp
2=32bpp
3=reserved
Z[1:0] value for tiling
Primary overlay pixel format. It is used together with
D1OVL_DEPTH to define the overlay format.
If (D1OVL_DEPTH = 0x1)(16 bpp)
0x0- ARGB 1555
0x1 - RGB 565
0x2 - BGRA 5551
others - reserved
else if (D1OVL_DEPTH = 0x2)(32 bpp)
0x0 - ACrYCb 8888 or ARGB 8888
0x1 - ACrYCb 2101010 or ARGB 2101010
0x2 - CbACrA or BGRA 1010102
others - reserved
Enables multichip tile compaction
0=Disable
1=Enable
Enables Overlay 1 address translation
0=0: physical memory
1=1: virtual memory
Enables Overlay 1 privileged access
0=0: no privileged access
1=1: privileged access
Defines the tiling mode
0=ARRAY_LINEAR_GENERAL: Unaligned linear array
1=ARRAY_LINEAR_ALIGNED: Aligned linear array
2=ARRAY_1D_TILED_THIN1: Uses 1D 8x8x1 tiles
3=ARRAY_1D_TILED_THICK: Uses 1D 8x8x4 tiles
4=ARRAY_2D_TILED_THIN1: Uses 8x8x1 macro-tiles
5=ARRAY_2D_TILED_THIN2: Macro-tiles are 2x high
6=ARRAY_2D_TILED_THIN4: Macro-tiles are 4x high
7=ARRAY_2D_TILED_THICK: Uses 8x8x4 macro-tiles
8=ARRAY_2B_TILED_THIN1: uses row bank swapping
9=ARRAY_2B_TILED_THIN2: uses row bank swapping
10=ARRAY_2B_TILED_THIN4: uses row bank swapping
11=ARRAY_2B_TILED_THICK: uses row bank swapping
12=ARRAY_3D_TILED_THIN1: Slices are pipe rotated
13=ARRAY_3D_TILED_THICK: Slices are pipe rotated
14=ARRAY_3B_TILED_THIN1: Slices are pipe rotated
15=ARRAY_3B_TILED_THICK: Slices are pipe rotated
Primary overlay pixel format expansion mode.
0=dynamic expansion for RGB
1=zero expansion for YCbCr
Primary overlay pixel depth and format.
D1OVL_CONTROL2 - RW - 32 bits - [GpuF0MMReg:0x6188]
Field Name
D1OVL_HALF_RESOLUTION_ENABLE
Bits
0
Default
0x0
Primary overlay half resolution control
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-176
Description
Primary overlay half resolution control
0=disable
1=enable
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1OVL_SWAP_CNTL - RW - 32 bits - [GpuF0MMReg:0x618C]
Field Name
D1OVL_ENDIAN_SWAP
Bits
1:0
Default
0x0
D1OVL_RED_CROSSBAR
5:4
0x0
D1OVL_GREEN_CROSSBAR
7:6
0x0
D1OVL_BLUE_CROSSBAR
9:8
0x0
11:10
0x0
D1OVL_ALPHA_CROSSBAR
Endian swap and component reorder control
Description
MC endian swap select
0=0=none
1=1=8in16(0xaabb=>0xbbaa)
2=2=8in32(0xaabbccdd=>0xddccbbaa)
3=3=8in64(0xaabbccddeeff0011=>0x1100ffeeddccbbaa)
Red crossbar select
0=0=select from R
1=1=select from G
2=2=select from B
3=3=select from A
Green crossbar select
0=0=select from G
1=1=select from B
2=2=select from A
3=3=select from R
Blue crossbar select
0=0=select from B
1=1=select from A
2=2=select from R
3=3=select from G
Alpha crossbar select
0=0=select from A
1=1=select from R
2=2=select from G
3=3=select from B
D1OVL_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6190]
Field Name
D1OVL_DFQ_ENABLE
D1OVL_SURFACE_ADDRESS
Bits
0
31:8
Default
0x0
0x0
Primary overlay surface base address in byte.
Description
Surface address DFQ enable
Primary overlay surface base address in byte. It is 256
bytes aligned.
D1OVL_PITCH - RW - 32 bits - [GpuF0MMReg:0x6198]
Field Name
D1OVL_PITCH
Bits
13:0
Default
0x0
Description
Primary overlay surface pitch in pixels. For
Micro-tiled/Macro-tiled surface, it must be multiple of 64
pixeld in 8bpp mode. For Micro-linear/Macro-tiled surface, it
must be multiple of 256 pixeld in 8bpp mode, multiple of 128
pixels in 16bpp mode and multiple of 64 pixels in 32bpp
mode. For Micro-linear/Macro-linear surface, it must be
multiple of 64 pixels in 8bpp mode. For other modes, it must
be multiple of 32.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-177
Display Controller Registers
Primary overlay surface pitch in pixels.
D1OVL_SURFACE_OFFSET_X - RW - 32 bits - [GpuF0MMReg:0x619C]
Field Name
D1OVL_SURFACE_OFFSET_X
Bits
12:0
Default
0x0
Description
Primary overlay X surface offset. It is 256 pixels aligned.
NOTE: Bits 0:7 of this field are hardwired to ZERO.
Primary overlay X surface offset.
D1OVL_SURFACE_OFFSET_Y - RW - 32 bits - [GpuF0MMReg:0x61A0]
Field Name
D1OVL_SURFACE_OFFSET_Y
Bits
12:0
Default
0x0
Description
Primary overlay Y surface offset. It is even value.
NOTE: Bit 0 of this field is hardwired to ZERO.
Primary overlay Y surface offset.
D1OVL_START - RW - 32 bits - [GpuF0MMReg:0x61A4]
Field Name
D1OVL_Y_START
Bits
12:0
Default
0x0
Description
Primary overlay Y start coordinate relative to the desktop
coordinates.
D1OVL_X_START
28:16
0x0
Primary overlay X start coordinate relative to the desktop
coordinates.
Primary overlay X, Y start coordinate relative to the desktop coordinates.
D1OVL_END - RW - 32 bits - [GpuF0MMReg:0x61A8]
Field Name
D1OVL_Y_END
Bits
13:0
Default
0x0
Description
Primary overlay Y end coordinate relative to the desktop
coordinates. It is exclusive and the maximum value is 8K.
D1OVL_X_END
29:16
0x0
Primary overlay X end coordinate relative to the desktop
coordinates. It is exclusive and the maximum value is 8K.
Primary overlay X, Y end coordinate relative to the desktop coordinates.
D1OVL_UPDATE - RW - 32 bits - [GpuF0MMReg:0x61AC]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-178
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1OVL_UPDATE_PENDING (R)
0
0x0
D1OVL_UPDATE_TAKEN (R)
1
0x0
D1OVL_UPDATE_LOCK
16
0x0
D1OVL_DISABLE_MULTIPLE_UPDATE
24
0x0
Primary overlay register update
Primary overlay register update pending control. It is set to
1 after a host write to overlay double buffer register. It is
cleared after double buffering is done. The double buffering
occurs when UPDATE_PENDING = 1 and UPDATE_LOCK
= 0 and V_UPDATE = 1.
If CRTC1 is disabled, the registers will be updated instantly.
D1OVL double buffer registers include:
D1OVL_ENABLE
D1OVL_DEPTH
D1OVL_FORMAT
D1OVL_SWAP_RB
D1OVL_COLOR_EXPANSION_MODE
D1OVL_HALF_RESOLUTION_ENABLE
D1OVL_SURFACE_ADDRESS
D1OVL_PITCH
D1OVL_SURFACE_OFFSET_X
D1OVL_SURFACE_OFFSET_Y
D1OVL_START
D1OVL_END
0=No update pending
1=Update pending
Primary overlay update taken status. It is set to 1 when
double buffering occurs and cleared when V_UPDATE = 0.
Primary overlay register update lock control.
0=Unlocked
1=Locked
0=D1OVL registers can be updated multiple times in one
V_UPDATE period
1=D1OVL registers can only be updated once in one
V_UPDATE period
D1OVL_SURFACE_ADDRESS_INUSE - RW - 32 bits - [GpuF0MMReg:0x61B0]
Field Name
D1OVL_SURFACE_ADDRESS_INUSE
(R)
Bits
31:8
Default
0x0
Snapshot of primary overlay surface address in use
Description
This register reads back snapshot of primary overlay
surface address used for data request. The address is the
signal sent to DMIF and is updated on SOF or horizontal
surface update. The snapshot is triggered by writing 1 into
field D1CRTC_SNAPSHOT_MANUAL_TRIGGER of CRTC
register D1CRTC_SNAPSHOT_STATUS.
D1OVL_DFQ_CONTROL - RW - 32 bits - [GpuF0MMReg:0x61B4]
Field Name
D1OVL_DFQ_RESET
D1OVL_DFQ_SIZE
Bits
0
6:4
Default
0x0
0x0
D1OVL_DFQ_MIN_FREE_ENTRIES
10:8
0x0
Description
Reset the deep flip queue
Size of the deep flip queue: 0 = 1 deep queue, 1 = 2 deep
queue,..., 7 = 8 deep queue
Minimum # of free entries before surface pending is
asserted
Control of the deep flip queue for D1 overlay
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-179
Display Controller Registers
D1OVL_DFQ_STATUS - RW - 32 bits - [GpuF0MMReg:0x61B8]
Field Name
D1OVL_DFQ_NUM_ENTRIES (R)
D1OVL_DFQ_RESET_FLAG (R)
D1OVL_DFQ_RESET_ACK (W)
Status of the deep flip queue for D1 overlay
2.7.3
Bits
3:0
Default
0x0
8
9
0x0
0x0
Description
# of entries in deep flip queue. 0 = 1 entry, 1 = 2 entries, ... 7
= 8 entries
Sticky bit: Deep flip queue in reset
Clear D1OVL_DFQ_RESET_FLAG
Primary Display Video Overlay Transform Registers
D1OVL_COLOR_MATRIX_TRANSFORMATION_CNTL - RW - 32 bits - [GpuF0MMReg:0x6140]
Field Name
D1OVL_COLOR_MATRIX_TRANSFORM
ATION_CNTL
Bits
2:0
Default
0x0
Matrix transformation control for primary display overlay pixels.
Description
Matrix transformation control for primary display overlay
pixels. It is used when PIX_TYPE is 0.
0=No color space adjustment on display output of overlay
pixels
1=Apply display x color spcae control on the overlay
pixels based on DxCOLOR_MATRIX_COEF register
settings
2=Convert overlay pixel to standard definition YCbCr(601)
color space
3=Convert overlay pixels to high definition YCbCR(709)
color space
4=Convert overlay pixels to high definition TVRGB color
space
D1OVL_MATRIX_TRANSFORM_EN - RW - 32 bits - [GpuF0MMReg:0x6200]
Field Name
D1OVL_MATRIX_TRANSFORM_EN
Bits
0
Default
0x0
Primary overlay matrix conversion enable.
Description
Primary overlay matrix conversion enable
0=disable
1=enable
D1OVL_MATRIX_COEF_1_1 - RW - 32 bits - [GpuF0MMReg:0x6204]
Field Name
D1OVL_MATRIX_COEF_1_1
Bits
18:0
Default
0x198a0
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-180
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1OVL_MATRIX_SIGN_1_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
D1OVL_MATRIX_COEF_1_2 - RW - 32 bits - [GpuF0MMReg:0x6208]
Field Name
D1OVL_MATRIX_COEF_1_2
Bits
18:0
Default
0x12a20
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_1_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
D1OVL_MATRIX_COEF_1_3 - RW - 32 bits - [GpuF0MMReg:0x620C]
Field Name
D1OVL_MATRIX_COEF_1_3
Bits
18:0
Default
0x0
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_1_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
D1OVL_MATRIX_COEF_1_4 - RW - 32 bits - [GpuF0MMReg:0x6210]
Field Name
D1OVL_MATRIX_COEF_1_4
Bits
26:8
Default
0x48700
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S11.1.
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_1_4
31
0x1
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
D1OVL_MATRIX_COEF_2_1 - RW - 32 bits - [GpuF0MMReg:0x6214]
Field Name
D1OVL_MATRIX_COEF_2_1
Bits
18:0
Default
0x72fe0
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_2_1
31
0x1
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-181
Display Controller Registers
D1OVL_MATRIX_COEF_2_2 - RW - 32 bits - [GpuF0MMReg:0x6218]
Field Name
D1OVL_MATRIX_COEF_2_2
Bits
18:0
Default
0x12a20
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_2_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
D1OVL_MATRIX_COEF_2_3 - RW - 32 bits - [GpuF0MMReg:0x621C]
Field Name
D1OVL_MATRIX_COEF_2_3
Bits
18:0
Default
0x79bc0
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_2_3
31
0x1
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
D1OVL_MATRIX_COEF_2_4 - RW - 32 bits - [GpuF0MMReg:0x6220]
Field Name
D1OVL_MATRIX_COEF_2_4
Bits
26:8
Default
0x22100
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S11.1.
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_2_4
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
D1OVL_MATRIX_COEF_3_1 - RW - 32 bits - [GpuF0MMReg:0x6224]
Field Name
D1OVL_MATRIX_COEF_3_1
Bits
18:0
Default
0x0
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_3_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-182
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1OVL_MATRIX_COEF_3_2 - RW - 32 bits - [GpuF0MMReg:0x6228]
Field Name
D1OVL_MATRIX_COEF_3_2
Bits
18:0
Default
0x12a20
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_3_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
D1OVL_MATRIX_COEF_3_3 - RW - 32 bits - [GpuF0MMReg:0x622C]
Field Name
D1OVL_MATRIX_COEF_3_3
Bits
18:0
Default
0x20460
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_3_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
D1OVL_MATRIX_COEF_3_4 - RW - 32 bits - [GpuF0MMReg:0x6230]
Field Name
D1OVL_MATRIX_COEF_3_4
Bits
26:8
Default
0x3af80
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for primary overlay. Format fix-point
S11.1.
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D1OVL_MATRIX_SIGN_3_4
31
0x1
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for primary overlay.
2.7.4
Primary Display Video Overlay Gamma Correction Registers
D1OVL_PWL_TRANSFORM_EN - RW - 32 bits - [GpuF0MMReg:0x6280]
Field Name
D1OVL_PWL_TRANSFORM_EN
Bits
0
Default
0x0
Description
Primary overlay gamma correction enable.
0=disable
1=enable
Primary overlay gamma correction enable.
D1OVL_PWL_0TOF - RW - 32 bits - [GpuF0MMReg:0x6284]
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-183
Display Controller Registers
Field Name
D1OVL_PWL_0TOF_OFFSET
Bits
8:0
Default
0x0
Description
Primary overlay gamma correction non-linear offset for
input 0x0-0xF. Format fix-point 8.1 (0.0 to +255.5).
D1OVL_PWL_0TOF_SLOPE
26:16
0x100
Primary overlay gamma correction non-linear slope for input
0x0-0xF. Format fix-point 3.8 (0.00 to +7.99).
Primary overlay gamma correction non-linear offset and slope for input 0x0-0xF
D1OVL_PWL_10TO1F - RW - 32 bits - [GpuF0MMReg:0x6288]
Field Name
D1OVL_PWL_10TO1F_OFFSET
Bits
8:0
Default
0x20
Description
Primary overlay gamma correction non-linear offset for
input 0x10-0x1F. Format fix-point 8.1 (0.0 to +255.5).
D1OVL_PWL_10TO1F_SLOPE
26:16
0x100
Primary overlay gamma correction non-linear slope for input
0x10-0x1F. Format fix-point 3.8 (0.00 to +7.99).
Primary overlay gamma correction non-linear offset and slope for input 0x10-0x1F
D1OVL_PWL_20TO3F - RW - 32 bits - [GpuF0MMReg:0x628C]
Field Name
D1OVL_PWL_20TO3F_OFFSET
Bits
9:0
Default
0x40
Description
Primary overlay gamma correction non-linear offset for
input 0x20-0x3F. Format fix-point 9.1 (0.0 to +511.5).
D1OVL_PWL_20TO3F_SLOPE
25:16
0x100
Primary overlay gamma correction non-linear slope for input
0x20-0x3F. Format fix-point 2.8 (0.00 to +3.99).
Primary overlay gamma correction non-linear offset and slope for input 0x20-0x3F
D1OVL_PWL_40TO7F - RW - 32 bits - [GpuF0MMReg:0x6290]
Field Name
D1OVL_PWL_40TO7F_OFFSET
Bits
9:0
Default
0x80
Description
Primary overlay gamma correction non-linear offset for
input 40-7F. Format fix-point 9.1 (0.0 to +511.5).
D1OVL_PWL_40TO7F_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
40-7F. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 40-7F.
D1OVL_PWL_80TOBF - RW - 32 bits - [GpuF0MMReg:0x6294]
Field Name
D1OVL_PWL_80TOBF_OFFSET
Bits
10:0
Default
0x100
Description
Primary overlay gamma correction non-linear offset for
input 80-BF. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_80TOBF_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
80-BF. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 80-BF.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-184
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1OVL_PWL_C0TOFF - RW - 32 bits - [GpuF0MMReg:0x6298]
Field Name
D1OVL_PWL_C0TOFF_OFFSET
Bits
10:0
Default
0x180
Description
Primary overlay gamma correction non-linear offset for
input C0-FF. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_C0TOFF_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
C0-FF. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input C0-FF.
D1OVL_PWL_100TO13F - RW - 32 bits - [GpuF0MMReg:0x629C]
Field Name
D1OVL_PWL_100TO13F_OFFSET
Bits
10:0
Default
0x200
Description
Primary overlay gamma correction non-linear offset for
input 100-13F. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_100TO13F_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
100-13F. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 100-13F.
D1OVL_PWL_140TO17F - RW - 32 bits - [GpuF0MMReg:0x62A0]
Field Name
D1OVL_PWL_140TO17F_OFFSET
Bits
10:0
Default
0x280
Description
Primary overlay gamma correction non-linear offset for
input 140-17F. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_140TO17F_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
140-17F. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 140-17F.
D1OVL_PWL_180TO1BF - RW - 32 bits - [GpuF0MMReg:0x62A4]
Field Name
D1OVL_PWL_180TO1BF_OFFSET
Bits
10:0
Default
0x300
Description
Primary overlay gamma correction non-linear offset for
input 180-1BF. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_180TO1BF_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
180-1BF. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 180-1BF.
D1OVL_PWL_1C0TO1FF - RW - 32 bits - [GpuF0MMReg:0x62A8]
Field Name
D1OVL_PWL_1C0TO1FF_OFFSET
Description
Primary overlay gamma correction non-linear offset for
input 1C0-1FF. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_1C0TO1FF_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
1C0-1FF. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 1C0-1FF.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
10:0
Default
0x380
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-185
Display Controller Registers
D1OVL_PWL_200TO23F - RW - 32 bits - [GpuF0MMReg:0x62AC]
Field Name
D1OVL_PWL_200TO23F_OFFSET
Bits
10:0
Default
0x400
Description
Primary overlay gamma correction non-linear offset for
input 200-23F. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_200TO23F_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
200-23F. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 200-23F.
D1OVL_PWL_240TO27F - RW - 32 bits - [GpuF0MMReg:0x62B0]
Field Name
D1OVL_PWL_240TO27F_OFFSET
Bits
10:0
Default
0x480
Description
Primary overlay gamma correction non-linear offset for
input 240-27F. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_240TO27F_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
240-27F. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 240-27F.
D1OVL_PWL_280TO2BF - RW - 32 bits - [GpuF0MMReg:0x62B4]
Field Name
D1OVL_PWL_280TO2BF_OFFSET
Bits
10:0
Default
0x500
Description
Primary overlay gamma correction non-linear offset for
input 280-2BF. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_280TO2BF_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
280-2BF. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 280-2BF.
D1OVL_PWL_2C0TO2FF - RW - 32 bits - [GpuF0MMReg:0x62B8]
Field Name
D1OVL_PWL_2C0TO2FF_OFFSET
Bits
10:0
Default
0x580
Description
Primary overlay gamma correction non-linear offset for
input 2C0-2FF. Format fix-point 10.1(0.0 to +1023.5).
D1OVL_PWL_2C0TO2FF_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
2C0-2FF. Format fix-point 1.8(0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 2C0-2FF.
D1OVL_PWL_300TO33F - RW - 32 bits - [GpuF0MMReg:0x62BC]
Field Name
D1OVL_PWL_300TO33F_OFFSET
Bits
10:0
Default
0x600
Description
Primary overlay gamma correction non-linear offset for
input 300-33F. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_300TO33F_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
300-33F. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 300-33F.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-186
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1OVL_PWL_340TO37F - RW - 32 bits - [GpuF0MMReg:0x62C0]
Field Name
D1OVL_PWL_340TO37F_OFFSET
Bits
10:0
Default
0x680
Description
Primary overlay gamma correction non-linear offset for
input 340-37F. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_340TO37F_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
340-37F. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 340-37F.
D1OVL_PWL_380TO3BF - RW - 32 bits - [GpuF0MMReg:0x62C4]
Field Name
D1OVL_PWL_380TO3BF_OFFSET
Bits
10:0
Default
0x700
Description
Primary overlay gamma correction non-linear offset for
input 380-3BF. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_380TO3BF_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
380-3BF. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 380-3BF.
D1OVL_PWL_3C0TO3FF - RW - 32 bits - [GpuF0MMReg:0x62C8]
Field Name
D1OVL_PWL_3C0TO3FF_OFFSET
Description
Primary overlay gamma correction non-linear offset for
input 3C0-3FF. Format fix-point 10.1 (0.0 to +1023.5).
D1OVL_PWL_3C0TO3FF_SLOPE
24:16
0x100
Primary overlay gamma correction non-linear slope for input
3C0-3FF. Format fix-point 1.8 (0.00 to +1.99).
Primary overlay gamma correction non-linear offset and slope for input 3C0-3FF.
2.7.5
Bits
10:0
Default
0x780
Primary Display Graphics and Overlay Blending Registers
D1OVL_KEY_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6300]
Field Name
D1GRPH_KEY_FUNCTION
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
1:0
Default
0x0
Description
Selects graphic keyer result equation for primary display.
0=GRPH1_KEY = FALSE = 0
1=GRPH1_KEY = TRUE = 1
2=GPPH1_KEY = (GRPH1_RED in range) AND
(GRPH1_GREEN in range) AND (GRPH1_BLUE in range)
AND(GRPH1_ALPHA in range)
3=GRPH1_KEY = not [(GRPH1_RED in range) AND
(GRPH1_GREEN in range) AND (GRPH1_BLUE in range)
AND(GRPH1_ALPHA in range)]
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-187
Display Controller Registers
D1OVL_KEY_FUNCTION
9:8
0x0
D1OVL_KEY_COMPARE_MIX
16
0x0
Primary display key control
Selects overlay keyer result equation for primary display.
0=OVL1_KEY = FALSE = 0
1=OVL1_KEY = TRUE = 1
2=OVL1_KEY = (OVL1_Cr_RED in range) AND
(OVL1_Y_GREEN in range) AND (OVL1_Cb_BLUE in
range) AND (OVL1_ALPHA in range)
3=OVL1_KEY = not [(OVL1_Cr_RED in range) AND
(OVL1_Y_GREEN in range) AND (OVL1_Cb_BLUE in
range) AND (OVL1_ALPHA in range)]
Selects final mix of graphics and overlay keys for primary
display.
0=GRPH_OVL_KEY = GRPH_KEY or OVL_KEY
1=GRPH_OVL_KEY = GRPH_KEY and OVL_KEY
D1GRPH_ALPHA - RW - 32 bits - [GpuF0MMReg:0x6304]
Field Name
D1GRPH_ALPHA
Bits
7:0
Default
0xff
Description
Global graphic alpha for use in key mode and global alpha
modes. See D1OVL_ALPHA_MODE register filed for more
details
Global graphic alpha for use in key mode and global alpha modes.
D1OVL_ALPHA - RW - 32 bits - [GpuF0MMReg:0x6308]
Field Name
D1OVL_ALPHA
Bits
7:0
Default
0xff
Description
Global overlay alpha for use in key mode and global alpha
modes. See D1OVL_ALPHA_MODE register filed for more
details
Global overlay alpha for use in key mode and global alpha modes.
D1OVL_ALPHA_CONTROL - RW - 32 bits - [GpuF0MMReg:0x630C]
Field Name
D1OVL_ALPHA_MODE
Bits
1:0
Default
0x0
Description
Graphics/overlay alpha blending mode for primary
controller.
In any case, if there is only graphics, the input OVL_DATA
is forced to blank. If there is only overlay, the input
GRPH_DATA is forced to blank.
0=Keyer mode, select graphic or overlay keyer to mix
graphics and overlay
1=Per pixel graphic alpha mode.Alpha blend graphic and
overlay layer. The alpha from graphic pixel may be inverted
according to register field
2=Global alpha mode
3=Per pixel overlay alpha mode
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-188
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1OVL_ALPHA_PREMULT
8
0x0
D1OVL_ALPHA_INV
16
0x0
Primary display graphics/overlay alpha blending control
For use with per pixel alpha blend mode. Selects whether
pre-multiplied alpha or non-multiplied alpha.
0=0x0 - When DxOVL_ALPHA_MODE = 0x1, then Pixel =
PIX_ALPHA * graphics pixel + (1-PIX_ALPHA) * overlay
pixel.When DxOVL_ALPHA_MODE = 0x3, then Pixel =
PIX_ALPHA * overlay pixel + (1-PIX_ALPHA) * graphic
pixel
1=0x1 - When DxOVL_ALPHA_MODE = 0x1, then Pixel =
graphic pixel + (1-PIX_ALPHA) * overlay pixel.When
DxOVL_ALPHA_MODE = 0x3, then Pixel = overlay pixel +
(1-PIX_ALPHA) * graphic pixel
For use with pixel blend mode. Apply optional inversion to
the alpha value extracted form the graphics or overlay
surface data.
0=PIX_ALPHA = alpha from graphics or overlay
1=PIX_ALPHA = 1 - alpha from graphics or overlay
D1GRPH_KEY_RANGE_RED - RW - 32 bits - [GpuF0MMReg:0x6310]
Field Name
D1GRPH_KEY_RED_LOW
D1GRPH_KEY_RED_HIGH
Bits
15:0
31:16
Default
0x0
0x0
Description
Primary graphics keyer red component lower limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Primary graphics keyer red component upper limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Primary graphics keyer red component range
D1GRPH_KEY_RANGE_GREEN - RW - 32 bits - [GpuF0MMReg:0x6314]
Field Name
D1GRPH_KEY_GREEN_LOW
D1GRPH_KEY_GREEN_HIGH
Bits
15:0
31:16
Default
0x0
0x0
Description
Primary graphics keyer green component lower limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Primary graphics keyer green component upper limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Primary graphics keyer green component range
D1GRPH_KEY_RANGE_BLUE - RW - 32 bits - [GpuF0MMReg:0x6318]
Field Name
D1GRPH_KEY_BLUE_LOW
Bits
15:0
Default
0x0
Description
Primary graphics keyer blue component lower limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-189
Display Controller Registers
D1GRPH_KEY_BLUE_HIGH
31:16
0x0
Primary graphics keyer blue component upper limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Primary graphics keyer blue component range
D1GRPH_KEY_RANGE_ALPHA - RW - 32 bits - [GpuF0MMReg:0x631C]
Field Name
D1GRPH_KEY_ALPHA_LOW
D1GRPH_KEY_ALPHA_HIGH
Bits
15:0
31:16
Default
0x0
0x0
Description
Primary graphics keyer alpha component lower limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Primary graphics keyer alpha component upper limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Primary graphics keyer alpha component range
D1OVL_KEY_RANGE_RED_CR - RW - 32 bits - [GpuF0MMReg:0x6320]
Field Name
D1OVL_KEY_RED_CR_LOW
D1OVL_KEY_RED_CR_HIGH
Bits
9:0
25:16
Default
0x0
0x0
Description
Primary overlay keyer red component lower limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Primary overlay keyer red component upper limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Primary overlay keyer red component range
D1OVL_KEY_RANGE_GREEN_Y - RW - 32 bits - [GpuF0MMReg:0x6324]
Field Name
D1OVL_KEY_GREEN_Y_LOW
D1OVL_KEY_GREEN_Y_HIGH
Bits
9:0
25:16
Default
0x0
0x0
Description
Primary overlay keyer green component lower limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Primary overlay keyer green component upper limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Primary overlay keyer green component range
D1OVL_KEY_RANGE_BLUE_CB - RW - 32 bits - [GpuF0MMReg:0x6328]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-190
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1OVL_KEY_BLUE_CB_LOW
D1OVL_KEY_BLUE_CB_HIGH
9:0
25:16
0x0
Primary overlay keyer blue component lower limit.
0x0
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Primary overlay keyer blue component upper limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Primary overlay keyer blue component range
D1OVL_KEY_ALPHA - RW - 32 bits - [GpuF0MMReg:0x632C]
Field Name
D1OVL_KEY_ALPHA_LOW
D1OVL_KEY_ALPHA_HIGH
Bits
7:0
23:16
Default
0x0
Description
Primary overlay keyer alpha component lower limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Primary overlay keyer alpha component upper limit.
0x0
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Primary overlay keyer alpha component range
2.7.6
Primary Display Color Matrix Transform Registers
D1GRPH_COLOR_MATRIX_TRANSFORMATION_CNTL - RW - 32 bits - [GpuF0MMReg:0x6380]
Field Name
D1GRPH_COLOR_MATRIX_TRANSFOR
MATION_EN
Bits
0
Default
0x0
Description
Matrix transformation control for primary display graphics
and cursor pixel. It is used when PIX_TYPE is 1.
0=disable
1=enable
Matrix transformation control for primary display graphics and cursor pixel.
D1COLOR_MATRIX_COEF_1_1 - RW - 32 bits - [GpuF0MMReg:0x6384]
Field Name
D1COLOR_MATRIX_COEF_1_1
Bits
16:0
Default
0x0
Description
Combined matrix constant C11 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S1.11(-2.00 to +1.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_1_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C11 of RGB->YCbCr, contrast and brightness adjustment for primary display.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-191
Display Controller Registers
D1COLOR_MATRIX_COEF_1_2 - RW - 32 bits - [GpuF0MMReg:0x6388]
Field Name
D1COLOR_MATRIX_COEF_1_2
Bits
15:0
Default
0x0
Description
Combined matrix constant C12 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S0.11(-1.00 to + 0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_1_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C12 of RGB->YCbCr, contrast and brightness adjustment for primary display.
D1COLOR_MATRIX_COEF_1_3 - RW - 32 bits - [GpuF0MMReg:0x638C]
Field Name
D1COLOR_MATRIX_COEF_1_3
Bits
15:0
Default
0x0
Description
Combined matrix constant C13 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S0.11(-1.0 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_1_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C13 of RGB->YCbCr, contrast and brightness adjustment for primary display.
D1COLOR_MATRIX_COEF_1_4 - RW - 32 bits - [GpuF0MMReg:0x6390]
Field Name
D1COLOR_MATRIX_COEF_1_4
Bits
26:8
Default
0x0
Description
Combined matrix constant C14 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S11.1(-2048.5 to +2047.5). It includes subtraction
of 512 offset
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_1_4
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C14 of RGB->YCbCr, contrast and brightness adjustment for primary display.
D1COLOR_MATRIX_COEF_2_1 - RW - 32 bits - [GpuF0MMReg:0x6394]
Field Name
D1COLOR_MATRIX_COEF_2_1
Bits
15:0
Default
0x0
Description
Combined matrix constant C21 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S0.11(-1.00 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_2_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C21 of RGB->YCbCr, contrast and brightness adjustment for primary display.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-192
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1COLOR_MATRIX_COEF_2_2 - RW - 32 bits - [GpuF0MMReg:0x6398]
Field Name
D1COLOR_MATRIX_COEF_2_2
Bits
16:0
Default
0x0
Description
Combined matrix constant C22 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S1.11(-2.00 to +1.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_2_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C22 of RGB->YCbCr, contrast and brightness adjustment for primary display.
D1COLOR_MATRIX_COEF_2_3 - RW - 32 bits - [GpuF0MMReg:0x639C]
Field Name
D1COLOR_MATRIX_COEF_2_3
Bits
15:0
Default
0x0
Description
Combined matrix constant C23 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S0.11(-1.00 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_2_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C23 of RGB->YCbCr, contrast and brightness adjustment for primary display.
D1COLOR_MATRIX_COEF_2_4 - RW - 32 bits - [GpuF0MMReg:0x63A0]
Field Name
D1COLOR_MATRIX_COEF_2_4
Bits
26:8
Default
0x0
Description
Combined matrix constant C24 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S11.1(-2048.5 to +2047.5). It includes subtraction
of 512 offset
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_2_4
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C24 of RGB->YCbCr, contrast and brightness adjustment for primary display.
D1COLOR_MATRIX_COEF_3_1 - RW - 32 bits - [GpuF0MMReg:0x63A4]
Field Name
D1COLOR_MATRIX_COEF_3_1
Bits
15:0
Default
0x0
Description
Combined matrix constant C31 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S0.11(-1.00 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_3_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C31 of RGB->YCbCr, contrast and brightness adjustment for primary display.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-193
Display Controller Registers
D1COLOR_MATRIX_COEF_3_2 - RW - 32 bits - [GpuF0MMReg:0x63A8]
Field Name
D1COLOR_MATRIX_COEF_3_2
Bits
15:0
Default
0x0
Description
Combined matrix constant C32 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S0.11(-1.00 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_3_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C32 of RGB->YCbCr, contrast and brightness adjustment for primary display.
D1COLOR_MATRIX_COEF_3_3 - RW - 32 bits - [GpuF0MMReg:0x63AC]
Field Name
D1COLOR_MATRIX_COEF_3_3
Bits
16:0
Default
0x0
Description
Combined matrix constant C33 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S1.11(-2.00 to +1.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_3_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C33 of RGB->YCbCr, contrast and brightness adjustment for primary display.
D1COLOR_MATRIX_COEF_3_4 - RW - 32 bits - [GpuF0MMReg:0x63B0]
Field Name
D1COLOR_MATRIX_COEF_3_4
Bits
26:8
Default
0x0
Description
Combined matrix constant C34 of RGB->YCbCr, contrast
and brightness adjustment for primary display. Format
fix-point S11.1(-2048.5 to +2047.5). It includes subtraction
of 512 offset
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D1COLOR_MATRIX_SIGN_3_4
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C34 of RGB->YCbCr, contrast and brightness adjustment for primary display.
2.7.7
Primary Display Subsampling Registers
D1COLOR_SPACE_CONVERT - RW - 32 bits - [GpuF0MMReg:0x613C]
Field Name
D1COLOR_SUBSAMPLE_CRCB_MODE
Bits
1:0
Default
0x0
Description
Sub-sampling control for primary display
0=do not subsample CrCb(RB)
1=subsample CrCb (RB) by using 2 tap average method
2=subsample CrCb (RB) by using 1 tap on even pixel
3=subsample CrCb (RB) by using 1 tap on odd pixel
Sub-sampling control for primary display.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-194
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
2.7.8
Primary Display Realtime Overlay Registers
D1OVL_RT_SKEWCOMMAND - RW - 32 bits - [GpuF0MMReg:0x6500]
Field Name
D1OVL_RT_CLEAR_GOBBLE_COUNT
(W)
D1OVL_RT_INC_GOBBLE_COUNT (W)
D1OVL_RT_CLEAR_SUBMIT_COUNT
(W)
D1OVL_RT_INC_SUBMIT_COUNT (W)
D1OVL_RT_GOBBLE_COUNT (R)
D1OVL_RT_SUBMIT_COUNT (R)
Bits
0
Default
0x0
4
8
0x0
0x0
12
18:16
0x0
0x0
26:24
0x0
reset or increment submit and gobble count
Description
writing 1 to this bit clear the gobbleCount
this bit has higher priority than inc_gobblecount
writing 1 to this bit increments the gobbleCount
writing 1 to this bit clear the submitCount
this bit has higher priority than inc_submitcount
writing 1 to this bit increments the submitCount
read only register
gobble count value which increments with each
inc_gobble_count
and reset with clear_gobble_count commands.
it wraps around on overflow during increment.
read only register
submit count value which increments with each
inc_submit_count
and reset with clear_submit_count commands.
it wraps around on overflow during increment.
D1OVL_RT_SKEWCONTROL - RW - 32 bits - [GpuF0MMReg:0x6504]
Field Name
D1OVL_RT_CAPS
Bits
2:0
Default
0x0
D1OVL_RT_SKEW_MAX
controls for submit and gobble counts
6:4
0x0
Description
max value in submitCount and gobbleCount
this is the number of contents buffer - 1
should reset counters before programming this field
max skew allowed between gobbleCount and submitCount
D1OVL_RT_BAND_POSITION - RW - 32 bits - [GpuF0MMReg:0x6508]
Field Name
Bits
Default
D1OVL_RT_TOP_SCAN
13:0
0x0
D1OVL_RT_BTM_SCAN
29:16
0x0
the position of the top and bottom scan line for next RT
Description
define the top scan line for the next RT (inclusive)
define the bottom scan line for next RT (exclusive)
D1OVL_RT_PROCEED_COND - RW - 32 bits - [GpuF0MMReg:0x650C]
Field Name
D1OVL_RT_REDUCE_DELAY
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
Description
0 selects delay optimized scheme
1 selects basic render behind delay scan scheme
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-195
Display Controller Registers
D1OVL_RT_RT_FLIP
4
0x0
0 selects bandSync to be exposed to CP
1 selects frameSync to be exposed to CP
D1OVL_RT_PROCEED_ON_EOF_DISA
BLE
8
0x0
D1OVL_RT_WITH_HELD_ON_SOF
12
0x0
D1OVL_RT_CLEAR_GOBBLE_GO (W)
14
0x0
29:16
0x0
0 enables unfinished bands to pass bandSync on EOF
(valid only in basic scheme)
1 disables this feature
0 disables proceedOnEOF on next frameSync
1 disables proceedOnEOF on next SOF
This bit clear gobbleGo
disable another frame submit before next flip (ignored in
basic scheme)
define the number of scan lines above topscan.
if display starts reading from there, RT should wait
D1OVL_RT_TEAR_PROOF_HEIGHT
select RT flip proceed condition
D1OVL_RT_STAT - RW - 32 bits - [GpuF0MMReg:0x6510]
Field Name
D1OVL_RT_FIP_PROCEED_ACK (W)
Bits
0
Default
0x0
D1OVL_RT_FRAME_SYNC_ACK (W)
1
0x0
D1OVL_RT_OVL_START_ACK (W)
2
0x0
D1OVL_RT_BAND_INVISIBLE (R)
D1OVL_RT_BAND_SYNC (R)
8
9
0x0
0x0
D1OVL_RT_EOF_PRPCEED (R)
10
0x0
D1OVL_RT_FIP_PROCEED (R)
11
0x0
D1OVL_RT_FRAME_SYNC (R)
12
0x0
D1OVL_RT_GOBBLE_GO (R)
D1OVL_RT_NEW_SUBMIT (R)
D1OVL_RT_OVL_START (R)
13
14
15
0x0
0x0
0x0
D1OVL_RT_OVL_ENDED (R)
16
0x0
D1OVL_RT_SAFE_ZONE (R)
D1OVL_RT_SWITCH_REGIONS (R)
17
18
0x0
0x0
D1OVL_SKEW_MAX_REACHED (R)
19
0x0
31:20
0x0
D1OVL_LINE_COUNTER (R)
Status Bits
2.7.9
Description
The sticky bit clears the FIP_PROCEED FLAG flag when
written
The sticky bit clears the RT_FRAME_SYNC flag when
written
The sticky bit clears the OVL_START FLAG flag when
written
Debug bit indicating that overlay scanning in invisble region
Debug bit indicating that overlay bottom scan is less the line
counter
Debug bit indicating that overlay is ended. Set at eof and
reset at overlay start
Sticky debug bit that set when RT_FLIP_PROCEED signal
asserted.
Sticky debug bit indicating that overlay start set and a new
submission occured
Debug bit that set on frame_sync and clear at gobbleclr
Debug bit indicating a new submission occurred
Debug bit indicating that line buffer detects start of overlay
being accessed
Debug bit indicating that line buffer detects that the end of
overlay being accessed
Debug bit indicating that overlay is scaning in safe zone
Debug bit showing the postion of scan region relative to
display
Debug bit indicating that line buffer detected maximum
skew reached
debug bit showing display line counter value
Primary Display Hardware Cursor Registers
D1CUR_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6400]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-196
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1CURSOR_EN
0
0x0
D1CURSOR_MODE
9:8
0x0
D1CURSOR_2X_MAGNIFY
16
0x0
D1CURSOR_FORCE_MC_ON
20
0x0
Primary display hardware control
Primary display hardware cursor enabled.
0=disable
1=enable
Primary display hardware cursor mode.
For 2bpp mode, each line of cursor data is stored in
memory as 16 bits of AND data followed by 16 bits XOR
data.
For color AND/XOR mode, each pixel is stored sequentially
in memory as 32bits each in aRGB8888 format with bit 31
of each DWord being the AND bit.
For the color alpha modes the format is also 32bpp
aRGB8888 with all 8 bits of the alpha being used.All HW
cursor lines must be 64 pixels wide and all lines must be
stored sequentially in memory.
0=Mono (2bpp)
1=Color 24bpp + 1 bit AND (32bpp)
2=Color 24bpp + 8 bit alpha (32bpp) premultiplied alpha
3=Color 24bpp + 8 bit alpha (32bpp)unmultiplied alpha
Primary display hardware cursor 2x2 magnification.
0=no 2x2 magnification
1=2x2 magnification in horizontal and vertical direction
When set, if the incoming data is in D1 cursor region,
DCP_LB_cursor1_allow_stutter is set. This field in this
double bufferred register is not double buffered
D1CUR_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6408]
Field Name
D1CURSOR_SURFACE_ADDRESS
Bits
31:0
Default
0x0
NOTE: Bits 0:11 of this field are hardwired to ZERO.
Primary display hardware cursor surface base address.
Field Name
D1CURSOR_HEIGHT
D1CURSOR_WIDTH
Primary display hardware size
Description
Primary display hardware cursor surface base address in
byte. It is 4K byte aligned.
D1CUR_SIZE - RW - 32 bits - [GpuF0MMReg:0x6410]
Bits
5:0
21:16
Default
0x0
0x0
Description
Primary display hardware cursor height minus 1.
Primary display hardware cursor width minus 1.
D1CUR_POSITION - RW - 32 bits - [GpuF0MMReg:0x6414]
Field Name
D1CURSOR_Y_POSITION
Bits
12:0
Default
0x0
D1CURSOR_X_POSITION
28:16
0x0
Description
Primary display hardware cursor X coordinate at the hot
spot relative to the desktop coordinates.
Primary display hardware cursor X coordinate at the hot
spot relative to the desktop coordinates.
Primary display hardware cursor position
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-197
Display Controller Registers
D1CUR_HOT_SPOT - RW - 32 bits - [GpuF0MMReg:0x6418]
Field Name
D1CURSOR_HOT_SPOT_Y
Bits
5:0
Default
0x0
D1CURSOR_HOT_SPOT_X
21:16
0x0
Primary display hardware cursor hot spot position
Description
Primary display hardware cursor hot spot X length relative
to the top left corner.
Primary display hardware cursor hot spot Y length relative
to the top left corner.
D1CUR_COLOR1 - RW - 32 bits - [GpuF0MMReg:0x641C]
Field Name
D1CUR_COLOR1_BLUE
D1CUR_COLOR1_GREEN
Bits
7:0
15:8
Default
0x0
0x0
D1CUR_COLOR1_RED
Primary display hardware cursor color 1.
23:16
0x0
Description
Primary display hardware cursor blue component of color 1.
Primary display hardware cursor green component of color
1.
Primary display hardware cursor red component of color 1.
D1CUR_COLOR2 - RW - 32 bits - [GpuF0MMReg:0x6420]
Field Name
D1CUR_COLOR2_BLUE
D1CUR_COLOR2_GREEN
Bits
7:0
15:8
Default
0x0
0x0
D1CUR_COLOR2_RED
Primary display hardware cursor color 2.
23:16
0x0
Description
Primary display hardware cursor blue component of color 2.
Primary display hardware cursor green component of color
2.
Primary display hardware cursor red component of color 2.
D1CUR_UPDATE - RW - 32 bits - [GpuF0MMReg:0x6424]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-198
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1CURSOR_UPDATE_PENDING (R)
0
0x0
D1CURSOR_UPDATE_TAKEN (R)
1
0x0
D1CURSOR_UPDATE_LOCK
16
0x0
D1CURSOR_DISABLE_MULTIPLE_UPD
ATE
24
0x0
Primary display hardware cursor update pending status. It
is set to 1 after a host write to cursor double buffer register.
It is cleared after double buffering is done. The double
buffering occurs when D1CURSOR_UPDATE_PENDING =
1 and D1CURSOR_UPDATE_LOCK = 0 and V_UPDATE =
1.
If CRTC1 is disabled, the registers will be updated instantly.
The D1CUR double buffer registers are:
D1CURSOR_EN
D1CURSOR_MODE
D1CURSOR_2X_MAGNIFY
D1CURSOR_SURFACE_ADDRESS
D1CURSOR_HEIGHT
D1CURSOR_WIDTH
D1CURSOR_X_POSITION
D1CURSOR_Y_POSITION
D1CURSOR_HOT_SPOT_X
D1CURSOR_HOT_SPOT_Y
0=No update pending
1=Update pending
Primary display hardware cursor update taken status. It is
set to 1 when double buffering occurs and cleared when
V_UPDATE = 0
Primary display hardware cursor update lock control.
0=Unlocked
1=Locked
0=D1CURSOR registers can be updated multiple times in
one V_UPDATE period
1=D1CURSOR registers can only be updated once in one
V_UPDATE period
2.7.10 Primary Display Hardware Icon Registers
D1ICON_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6440]
Field Name
D1ICON_ENABLE
Bits
0
Default
0x0
D1ICON_2X_MAGNIFY
16
0x0
D1ICON_FORCE_MC_ON
20
0x0
Description
Primary display hardware icon enable.
0=disable
1=enable
Primary display hardware icon 2x2 magnification.
0=no 2x2 magnification
1=2x2 magnification in horizontal and vertical direction
When set, if the incoming data is in D1 icon region,
DCP_LB_icon1_allow_stutter is set. This field in this double
bufferred register is not double buffered.
Primary display hardware icon control.
D1ICON_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6448]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-199
Display Controller Registers
D1ICON_SURFACE_ADDRESS
31:0
0x0
Primary display hardware icon surface base address in
byte. It is 4K byte aligned.
NOTE: Bits 0:11 of this field are hardwired to ZERO.
Primary display hardware icon surface base address.
D1ICON_SIZE - RW - 32 bits - [GpuF0MMReg:0x6450]
Field Name
D1ICON_HEIGHT
D1ICON_WIDTH
Primary display hardware icon size.
Bits
6:0
22:16
Default
0x0
0x0
Description
Primary display hardware icon height minus 1.
Primary display hardware icon width minus 1.
D1ICON_START_POSITION - RW - 32 bits - [GpuF0MMReg:0x6454]
Field Name
D1ICON_Y_POSITION
Bits
12:0
D1ICON_X_POSITION
28:16
Default
0x0
0x0
Description
Primary display hardware icon Y start coordinate related to
the desktop coordinates.
Note: Icon can not be off the top and off the left edge of the
display surface. But can be off the bottom and off the right
edge of the display.
Primary display hardware icon X start coordinate relative to
the desktop coordinates.
Note: Icon can not be off the top and off the left edge of the
display surface. But can be off the bottom and off the right
edge of the display.
Primary display hardware icon position
D1ICON_COLOR1 - RW - 32 bits - [GpuF0MMReg:0x6458]
Field Name
D1ICON_COLOR1_BLUE
D1ICON_COLOR1_GREEN
D1ICON_COLOR1_RED
Primary display hardware icon color 1.
Bits
7:0
15:8
23:16
Default
0x0
0x0
0x0
Description
Primary display hardware icon blue component of color 1.
Primary display hardware icon green component of color 1.
Primary display hardware icon red component of color 1.
D1ICON_COLOR2 - RW - 32 bits - [GpuF0MMReg:0x645C]
Field Name
D1ICON_COLOR2_BLUE
D1ICON_COLOR2_GREEN
D1ICON_COLOR2_RED
Primary display hardware icon color 2.
Bits
7:0
15:8
23:16
Default
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-200
Description
Primary display hardware icon blue component of color 2.
Primary display hardware icon green component of color 2.
Primary display hardware icon red component of color 2.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1ICON_UPDATE - RW - 32 bits - [GpuF0MMReg:0x6460]
Field Name
D1ICON_UPDATE_PENDING (R)
Bits
0
Default
0x0
D1ICON_UPDATE_TAKEN (R)
1
0x0
D1ICON_UPDATE_LOCK
16
0x0
D1ICON_DISABLE_MULTIPLE_UPDATE
24
0x0
Primary display hardware icon update control
Description
Primary display hardware icon update Pending status. It is
set to 1 after a host write to icon double buffer register. It is
cleared after double buffering is done. The double buffering
occurs when D1ICON_UPDATE_PENDING = 1 and
D1ICON_UPDATE_LOCK = 0 and V_UPDATE = 1.
If CRTC1 is disabled, the registers will be updated instantly.
D1IOCN double buffer registers include :
D1ICON_ENABLE
D1ICON_2X_MAGNIFY
D1ICON_SURFACE_ADDRESS
D1ICON_HEIGHT
D1ICON_WIDTH
D1ICON_Y_POSITION
D1ICON_X_POSITION
0=No update pending
1=Update pending
Primary display hardware icon update Taken status. It is set
to 1 when double buffering occurs and cleared when
V_UPDATE = 0
Primary display hardware icon update lock control.
0=Unlocked
1=Locked
0=D1ICON registers can be updated multiple times in one
V_UPDATE period
1=D1ICON registers can only be updated once in one
V_UPDATE period
2.7.11 Primary Display Multi-VPU Control Registers
D1CRTC_MVP_CONTROL1 - RW - 32 bits - [GpuF0MMReg:0x6038]
Field Name
Bits
0
6:4
Default
0x0
0x0
MVP_MIXER_SLAVE_SEL
8
0x0
MVP_MIXER_SLAVE_SEL_DELAY_UNT
IL_END_OF_BLANK
9
0x0
MVP_ARBITRATION_MODE_FOR_AFR_
MANUAL_SWITCH_MODE
10
0x0
MVP_RATE_CONTROL
12
0x0
MVP_EN
MVP_MIXER_MODE
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Enable MVP feature
000 - Split mode/super-tile mode; 001 - AFR manual (driver
control); 010 - AFR (switching); 011 - AFR manual switch
(set inband control character through register); 100 SuperAA with gamma and degamma enabled; 101 SuperAA with only gamma enabled
0 - in AFR manual (drive control) mode, use master inputs
in the next frame; '1' - use the slave input
0 - MVP_MIXER_SLAVE_SEL takes effect immediately; '1'
- MVP_MIXER_SLAVE_SEL does not take effect until end
of horizontal or vertical blank region
Arbitration scheme used when both master and slave GPU
switch AFR flip queue status
0 = pixel source comes from the GPU which last make the
switch
1 = pixel source changes to the GPU which is not currently
displayed
0 - DDR; 1 - SDR
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-201
Display Controller Registers
MVP_CHANNEL_CONTROL
MVP_GPU_CHAIN_LOCATION
16
21:20
0x0
0x0
MVP_DISABLE_MSB_EXPAND
24
0x0
MVP_30BPP_EN
MVP_TERMINATION_CNTL_A
MVP_TERMINATION_CNTL_B
MVP Control 1
28
30
31
0x0
0x0
0x0
0 - single channel; 1 - dual channel
The location of the GPU in a chain: 00 - Master GPU, 01 middle GPU, 10 - head slave GPU (or slave GPU in
dual-GPU system
How to expand each color component of pixel data from
slave GPU from 8 to 10 bits: 0 - dynamic expansion, 1 - pad
0s
Enable 30bpp operation
Controls DVP termination resistors
Controls DVP termination resistors
D1CRTC_MVP_CONTROL2 - RW - 32 bits - [GpuF0MMReg:0x603C]
Field Name
MVP_MUX_DE_DVOCNTL0_SEL
MVP_MUX_DE_DVOCNTL2_SEL
MVP_MUXA_CLK_SEL
MVP_MUXB_CLK_SEL
MVP_DVOCNTL_MUX
Bits
0
4
8
12
16
Default
0x0
0x0
0x0
0x0
0x0
MVP_FLOW_CONTROL_OUT_EN
MVP_SWAP_LOCK_OUT_EN
20
24
0x0
0x0
MVP_SWAP_AB_IN_DC_DDR
28
0x1
MVP Control 2
Description
0 - selects DVOCNT2; 1 - selects DVOCNT0
0 - selects DVOCNT2; 1 - selects DVOCNT0
0 - selects CLKA; 1 - selects CLKB
0 - selects CLKA; 1 - selects CLKB
0 - DVOCNTL[2:0] = DVO_DE, DVO_HSYNC,
DVO_VSYNC; 1 - DVOCNTL[2:0] = DVO_DE,
MVP_DVOCLK_C, DVO_DE
Enable flow_control_out
0 - Swap_lock_out is not enabled; 1 - enable swap_lock out
in GPIO
1 - swap in A & B data in dual channel DDR mode. This is
the default
D1CRTC_MVP_FIFO_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6040]
Field Name
MVP_STOP_SLAVE_WM
Bits
7:0
Default
0x8
MVP_PAUSE_SLAVE_WM
15:8
0x8
MVP_PAUSE_SLAVE_CNT
23:16
0x4
Description
At the period after the start of DE from slave GPU, if MVP
FIFO level exceeds this watermark, flow control is asserted
In the middle of receiving a raster line from the slave GPU,
if MVP FIFO level falls below this watermark, flow control
signal is asserted for MVP_PAUSE_SLAVE_CNT cycles
In the middle of receiving a raster line from the slave GPU,
if MVP FIFO level falls below this watermark, flow control
signal is asserted for MVP_PAUSE_SLAVE_CNT cycles
MVP FIFO Control
D1CRTC_MVP_FIFO_STATUS - RW - 32 bits - [GpuF0MMReg:0x6044]
Field Name
MVP_FIFO_LEVEL (R)
MVP_FIFO_OVERFLOW (R)
MVP_FIFO_OVERFLOW_OCCURRED
(R)
MVP_FIFO_OVERFLOW_ACK
MVP_FIFO_UNDERFLOW (R)
MVP_FIFO_UNDERFLOW_OCCURRED
(R)
Bits
7:0
8
12
Default
0x0
0x0
0x0
16
20
24
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-202
Description
MVP FIFO level, in # of pixels
MVP FIFO overflows
Sticky bit - MVP FIFO overflow has occurred
Resets MVP_FIFO_OVERFLOW_OCCURRED
MVP FIFO underflows
Sticky bit - MVP FIFO underflows occurred
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
MVP_FIFO_UNDERFLOW_ACK
MVP_FIFO_ERROR_MASK
28
30
0x0
0x0
MVP_FIFO_ERROR_INT_STATUS (R)
MVP FIFO Status
31
0x0
Resets MVP_FIFO_UNDERFLOW_OCCURRED
Set to 1 to enable interrupt on mvp fifo overflow or
underflow event
Fifo error status flag (masked OR of fifo over/uderflow)
D1CRTC_MVP_SLAVE_STATUS - RW - 32 bits - [GpuF0MMReg:0x6048]
Field Name
MVP_SLAVE_PIXELS_PER_LINE_RCVE
D (R)
MVP_SLAVE_LINES_PER_FRAME_RCV
ED (R)
MVP Slave Status
Bits
12:0
Default
0x0
28:16
0x0
Description
The number of active pixels per line received from the slave
GPU
The number of active lines per frame received from the
slave GPU
D1CRTC_MVP_INBAND_CNTL_CAP - RW - 32 bits - [GpuF0MMReg:0x604C]
Field Name
MVP_IGNOR_INBAND_CNTL
MVP_PASSING_INBAND_CNTL_EN
Bits
0
4
Default
0x1
0x0
MVP_INBAND_CNTL_CHAR_CAP (R)
MVP Capture Inband Control
31:8
0x0
Description
Master GPU ignors the inband control signal
Slave GPU passes upstream slave GPU to downstream
slave GPU/master GPU
Inband control signal received from slave GPU
D1CRTC_MVP_INBAND_CNTL_INSERT - RW - 32 bits - [GpuF0MMReg:0x6050]
Field Name
D1CRTC_MVP_INBAND_OUT_MODE
Bits
1:0
Default
0x0
D1CRTC_MVP_INBAND_CNTL_CHAR_I
NSERT
MVP Insert Inband Control
31:8
0x0
Description
00 - disable inband insertion; 01 - used for debug only:
insert register MVP_INBAND_CNTL_CHAR_INSERT; 10 normal mode: insert the character generated by MVP_mixer
Used for debug only: 24-bit control character for insertion
D1CRTC_MVP_INBAND_CNTL_INSERT_TIMER - RW - 32 bits - [GpuF0MMReg:0x6054]
Field Name
D1CRTC_MVP_INBAND_CNTL_CHAR_I
NSERT_TIMER
MVP Insert Inband Control Timer
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
7:0
Default
0x8
Description
The number of clock cycles the character insertion trigger
from the line buffer needs to be ahead of end of lines for
CRTC to insert the in-band control character
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-203
Display Controller Registers
D1CRTC_MVP_BLACK_KEYER - RW - 32 bits - [GpuF0MMReg:0x6058]
Field Name
Bits
Default
Description
MVP_BLACK_KEYER_R
9:0
0x0
Black keyer value, for red pixel
MVP_BLACK_KEYER_G
19:10
0x0
Black keyer value, for green pixel
MVP_BLACK_KEYER_B
29:20
0x0
Black keyer value, for blue pixel
MVP Black keyer for smoothing out pixels after black keyer in LB in SFR mode
D1CRTC_MVP_STATUS - RW - 32 bits - [GpuF0MMReg:0x605C]
Field Name
D1CRTC_FLIP_NOW_OCCURRED (R)
Bits
0
Default
0x0
D1CRTC_AFR_HSYNC_SWITCH_DONE
_OCCURRED (R)
4
0x0
D1CRTC_FLIP_NOW_CLEAR (W)
16
0x0
D1CRTC_AFR_HSYNC_SWITCH_DONE
_CLEAR (W)
20
0x0
Reports status for MVP flipping in CRTC1
Description
Reports whether flip_now has occurred. A sticky bit.
0 = has not occurred
1 = has occurred
Reports whether afr_hsync_switch_done has occurred. A
sticky bit.
0 = has not occurred
1 = has occurred
Clears the sticky bit D1CRTC_FLIP_NOW_OCCURRED
when written with '1'
Clears the sticky bit
D1CRTC_AFR_HSYNC_SWITCH_DONE_OCCURRED
when written with '1'
D2CRTC_MVP_INBAND_CNTL_INSERT - RW - 32 bits - [GpuF0MMReg:0x6838]
Field Name
D2CRTC_MVP_INBAND_OUT_MODE
Bits
1:0
Default
0x0
D2CRTC_MVP_INBAND_CNTL_CHAR_I
NSERT
MVP Insert Inband Control for CRTC2
31:8
0x0
Description
00 - disable inband insertion; 01 - used for debug only:
insert register MVP_INBAND_CNTL_CHAR_INSERT; 10 normal mode: insert the character generated by MVP_mixer
Used for debug only: 24-bit control character for insertion
D2CRTC_MVP_INBAND_CNTL_INSERT_TIMER - RW - 32 bits - [GpuF0MMReg:0x683C]
Field Name
D2CRTC_MVP_INBAND_CNTL_CHAR_I
NSERT_TIMER
Bits
7:0
Default
0x8
MVP Insert Inband Control Timer for CRTC2
Description
The number of clock cycles the character insertion trigger
from the line buffer needs to be ahead of end of lines for
CRTC to insert the in-band control character
D1CRTC_MVP_CRC_CNTL - RW - 32 bits - [GpuF0MMReg:0x6840]
Field Name
MVP_CRC_BLUE_MASK
Bits
7:0
Default
0xff
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-204
Description
mask bit for blue component
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
MVP_CRC_GREEN_MASK
MVP_CRC_RED_MASK
MVP_CRC_EN
CRC control register for MVP
15:8
23:16
28
0xff
0xff
0x0
mask bit for green component
mask bit for red component
0 - CRC disabled; 1 - CRC enabled
D1CRTC_MVP_CRC_RESULT - RW - 32 bits - [GpuF0MMReg:0x6844]
Field Name
MVP_CRC_BLUE_RESULT (R)
Bits
7:0
Default
0x0
MVP_CRC_GREEN_RESULT (R)
15:8
0x0
MVP_CRC_RED_RESULT (R)
23:16
0x0
Description
CRC result for each frame (DE region only) - Blue
component
CRC result for each frame (DE region only) - Green
component
CRC result for each frame (DE region only) - Red
component
CRC result for each frame
D1CRTC_MVP_CRC2_CNTL - RW - 32 bits - [GpuF0MMReg:0x6848]
Field Name
MVP_CRC2_BLUE_MASK
MVP_CRC2_GREEN_MASK
MVP_CRC2_RED_MASK
MVP_CRC2_EN
CRC2 control register for MVP
Bits
7:0
15:8
23:16
28
Default
0xff
0xff
0xff
0x0
Description
mask bit for blue component
mask bit for green component
mask bit for red component
0 - CRC2 disabled; 1 - CRC2 enabled
D1CRTC_MVP_CRC2_RESULT - RW - 32 bits - [GpuF0MMReg:0x684C]
Field Name
MVP_CRC2_BLUE_RESULT (R)
Bits
7:0
Default
0x0
MVP_CRC2_GREEN_RESULT (R)
15:8
0x0
MVP_CRC2_RED_RESULT (R)
23:16
0x0
CRC2 result for each frame
Description
CRC2 result for each frame (DE region only) - Blue
component
CRC2 result for each frame (DE region only) - Green
component
CRC2 result for each frame (DE region only) - Red
component
D1CRTC_MVP_CONTROL3 - RW - 32 bits - [GpuF0MMReg:0x6850]
Field Name
MVP_RESET_IN_BETWEEN_FRAMES
Bits
0
Default
0x1
MVP_DDR_SC_AB_SEL
4
0x0
MVP_DDR_SC_B_START_MODE
8
0x0
MVP_FLOW_CONTROL_OUT_FORCE_
ONE
12
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
1 - reset pointers, state machines of the MVP receiving
logic between frames
0 - select bundle A in DDR single channel mode, 1 - select
bundle B
0 - Assuming the read & write clocks for meso-FIFO B is
meso-chronous; 1 - assuming they are synchronous
1 - force flow_control_out to 1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-205
Display Controller Registers
MVP_FLOW_CONTROL_OUT_FORCE_
ZERO
MVP_FLOW_CONTROL_CASCADE_EN
MVP_SWAP_48BIT_EN
MVP_FLOW_CONTROL_IN_CAP (R)
MVP Control Register 3
16
0x0
1 - force flow_control_out to 0
20
24
0x0
0x0
28
0x0
1 - cascade flow control in multi-GPU
1 - swap the least & most signficant 24 bits of the data as
they read out of the FIFO
capture flow_control_in, used for diagnostics
D1CRTC_MVP_RECEIVE_CNT_CNTL1 - RW - 32 bits - [GpuF0MMReg:0x6854]
Field Name
MVP_SLAVE_PIXEL_ERROR_CNT (R)
Bits
12:0
Default
0x0
MVP_SLAVE_LINE_ERROR_CNT (R)
28:16
0x0
31
0x1
MVP_SLAVE_DATA_CHK_EN
MVP Receive Counter Control 1
Description
Count # of pixels in a line that is wrong, reset by active edge
of hsync
Count # of lines in a frame that is wrong, reset by frame
start
Enable line & pixel counter, should be enabled a couple of
frames after master is enabled
D1CRTC_MVP_RECEIVE_CNT_CNTL2 - RW - 32 bits - [GpuF0MMReg:0x6858]
Field Name
MVP_SLAVE_FRAME_ERROR_CNT (R)
MVP_SLAVE_FRAME_ERROR_CNT_RE
SET
MVP Receiver Counter Control 2
Bits
12:0
31
Default
0x0
0x0
Description
Count # of frames that is wrong
Reset MVP_SLAVE_FRAME_ERROR_CNT
D1_MVP_AFR_FLIP_MODE - RW - 32 bits - [GpuF0MMReg:0x6514]
Field Name
Bits
Default
D1_MVP_AFR_FLIP_MODE
1:0
0x0
S/W writes to this register in AFR mode for display 1 page flip
Description
10 - real flip; 11 - dummy flip
D1_MVP_AFR_FLIP_FIFO_CNTL - RW - 32 bits - [GpuF0MMReg:0x6518]
Field Name
D1_MVP_AFR_FLIP_FIFO_NUM_ENTRI
ES (R)
D1_MVP_AFR_FLIP_FIFO_RESET
D1_MVP_AFR_FLIP_FIFO_RESET_FLA
G (R)
D1_MVP_AFR_FLIP_FIFO_RESET_ACK
Bits
3:0
Default
0x0
4
8
0x0
0x0
reset the AFR flip FIFO
sticky bit of the AFR flip fifo reset status
12
0x0
clear the DC_LB_MVP_AFR_FLIP_RESET_FLAG register
bit
This register controls AFR Flip FIFO in display 1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-206
Description
number of valid entries in the AFR flip FIFO
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D1_MVP_FLIP_LINE_NUM_INSERT - RW - 32 bits - [GpuF0MMReg:0x651C]
Field Name
D1_MVP_FLIP_LINE_NUM_INSERT_MO
DE
Bits
1:0
Default
0x2
Description
00 - no insertion, 0 is appended; 01 - debug: insert
D1_MVP_FLIP_LINE_NUM_INSERT register value; 10 normal Hsync mode, insert the sum of LB line number +
DC_LB_MVP_FLIP_LINE_NUM_OFFSET
D1_MVP_FLIP_LINE_NUM_INSERT
21:8
0x0
used for debug purpose, this is what will be the line number
carried to downstream GPUs if
D1_MVP_FLIP_LINE_NUM_INSERT_EN is set
D1_MVP_FLIP_LINE_NUM_OFFSET
29:24
0x0
used in normal HSYNC flipping operation. this is the
number added to the current LB (desktop) line number for
carrying to the downstream GPUs
D1_MVP_FLIP_AUTO_ENABLE
30
0x0
Enabling automatic AFR/SFR flipping for display 1
This register controls line number insertion for the Hsync flipping mode in display 1
2.7.12 Secondary Display Graphics Control Registers
D2GRPH_ENABLE - RW - 32 bits - [GpuF0MMReg:0x6900]
Field Name
D2GRPH_ENABLE
Bits
0
Default
0x1
Secondary graphic enabled.
Description
Secondary graphic enabled.
0=disable
1=enable
D2GRPH_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6904]
Field Name
D2GRPH_DEPTH
Bits
1:0
Default
0x0
D2GRPH_Z
5:4
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Secondary graphic pixel depth.
0=8bpp
1=16bpp
2=32bpp
3=64bpp
Z[1:0] value for tiling
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-207
Display Controller Registers
D2GRPH_FORMAT
10:8
0x0
D2GRPH_TILE_COMPACT_EN
12
0x0
D2GRPH_ADDRESS_TRANSLATION_E
NABLE
16
0x0
D2GRPH_PRIVILEGED_ACCESS_ENAB
LE
17
0x0
23:20
0x0
D2GRPH_ARRAY_MODE
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-208
Secondary graphic pixel format. It is used together with
D1GRPH_DEPTH to define the graphic pixel format.
If (D1GRPH_DEPTH = 0x0)(8 bpp)
0x0 - indexed
others - reserved
else if (D1GRPH_DEPTH = 0x1)(16 bpp)
0x0 - ARGB 1555
0x1 - RGB 565
0x2 - ARGB 4444
0x3 - Alpha index 88
0x4 - monochrome 16
0x5 - BGRA 5551
others - reserved
else if (D1GRPH_DEPTH = 0x2)(32 bpp)
0x0 - ARGB 8888
0x1 - ARGB 2101010
0x2 - 32bpp digital output
0x3 - 8-bit ARGB 2101010
0x4 - BGRA 1010102
0x5 - 8-bit BGRA 1010102
0x6 - RGB 111110
0x7 - BGR 101111
others - reserved
else if (D1GRPH_DEPTH = 0x3)(64 bpp)
0x0 - ARGB 16161616
0x1 - 64bpp digital output ARGB[13:2]
0x2 - 64bpp digital output RGB[15:0]
0x3 - 64bpp digital output ARGB[11:0]
0x4 - 64bpp digital output BGR[15:0]
others - reserved
Enables multichip tile compaction
0=Disable
1=Enable
Enables display 2 address translation
0=0=physical memory
1=1=virtual memory
Enables display 2 privileged page access
0=0=no priveledged access
1=1=priveledged access
Defines the tiling mode
0=ARRAY_LINEAR_GENERAL: Unaligned linear array
1=ARRAY_LINEAR_ALIGNED: Aligned linear array
2=ARRAY_1D_TILED_THIN1: Uses 1D 8x8x1 tiles
3=ARRAY_1D_TILED_THICK: Uses 1D 8x8x4 tiles
4=ARRAY_2D_TILED_THIN1: Uses 8x8x1 macro-tiles
5=ARRAY_2D_TILED_THIN2: Macro-tiles are 2x high
6=ARRAY_2D_TILED_THIN4: Macro-tiles are 4x high
7=ARRAY_2D_TILED_THICK: Uses 8x8x4 macro-tiles
8=ARRAY_2B_TILED_THIN1: uses row bank swapping
9=ARRAY_2B_TILED_THIN2: uses row bank swapping
10=ARRAY_2B_TILED_THIN4: uses row bank swapping
11=ARRAY_2B_TILED_THICK: uses row bank swapping
12=ARRAY_3D_TILED_THIN1: Slices are pipe rotated
13=ARRAY_3D_TILED_THICK: Slices are pipe rotated
14=ARRAY_3B_TILED_THIN1: Slices are pipe rotated
15=ARRAY_3B_TILED_THICK: Slices are pipe rotated
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2GRPH_16BIT_ALPHA_MODE
D2GRPH_16BIT_FIXED_ALPHA_RANG
E
25:24
30:28
0x0
0x0
This field is only used if 64 bpp graphics bit depth and
graphics/overlay blend using per-pixel alpha from graphics
channel. It is used for processing 16 bit alpha. The fixed
point graphics alpha value in the frame buffer is always
clamped to 0.0 - 1.0 data range.
0x0 - Floating point alpha (1 sign bit, 5 bit exponent, 10 bit
mantissa)
0x1 - Fixed point alpha with normalization from 256/256 to
255/255 to represent 1.0
0x2 - Fixed point alpha with no normalization
0x3 - Fixed point alpha using lower 8 bits of frame buffer
value, no normalization
This register field is only used if 64 bpp graphics bit depth
and D2GRPH_16BIT_ALPHA_MODE = 01 or 10. Also only
used if graphics/overlay blend using per-pixel alpha from
graphics channel. Final alpha blend value is rounded to 8
bits after optional normalization step (see
D2GRPH_16BIT_ALPHA_MODE).
0x0 - Use bits 15:0 of input alpha value for blend alpha
0x1 - Use bits 14:0 of input alpha value for blend alpha
0x2 - Use bits 13:0 of input alpha value for blend alpha
0x3 - Use bits 12:0 of input alpha value for blend alpha
0x4 - Use bits 11:0 of input alpha value for blend alpha
0x5 - Use bits 10:0 of input alpha value for blend alpha
0x6 - Use bits 9:0 of input alpha value for blend alpha
0x7 - Use bits 8:0 of input alpha value for blend alpha
Secondary graphic pixel depth and format.
D2GRPH_LUT_SEL - RW - 32 bits - [GpuF0MMReg:0x6908]
Field Name
D2GRPH_LUT_SEL
Bits
0
Default
0x0
D2GRPH_LUT_10BIT_BYPASS_EN
8
0x0
D2GRPH_LUT_10BIT_BYPASS_DBL_B
UF_EN
16
0x0
Secondary graphic LUT selection.
Description
Secondary graphic LUT selection.
0=select LUTA
1=select LUTB
Enable bypass secondary graphic LUT for 2101010 format
0=Use LUT
1=Bypass LUT when in 2101010 format. Ignored for other
formats
Enable double buffer D2GRPH_LUT_10BIT_BYPASS_EN
0=D1GRPH_LUT_10BIT_BYPASS_EN take effect right
away
1=D1GRPH_LUT_10BIT_BYPASS_EN are double
buffered
D2GRPH_SWAP_CNTL - RW - 32 bits - [GpuF0MMReg:0x690C]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-209
Display Controller Registers
D2GRPH_ENDIAN_SWAP
1:0
0x0
D2GRPH_RED_CROSSBAR
5:4
0x0
D2GRPH_GREEN_CROSSBAR
7:6
0x0
D2GRPH_BLUE_CROSSBAR
9:8
0x0
11:10
0x0
D2GRPH_ALPHA_CROSSBAR
MC endian swap select
0=0=none
1=1=8in16(0xaabb=>0xbbaa)
2=2=8in32(0xaabbccdd=>0xddccbbaa)
3=3=8in64(0xaabbccddeeff0011=>0x1100ffeeddccbbaa)
Red crossbar select
0=0=select from R
1=1=select from G
2=2=select from B
3=3=select from A
Green crossbar select
0=0=select from G
1=1=select from B
2=2=select from A
3=3=select from R
Blue crossbar select
0=0=select from B
1=1=select from A
2=2=select from R
3=3=select from G
Alpha crossbar select
0=0=select from A
1=1=select from R
2=2=select from G
3=3=select from B
Endian swap and component reorder control
D2GRPH_PRIMARY_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6910]
Field Name
D2GRPH_PRIMARY_DFQ_ENABLE
Bits
0
Default
0x0
D2GRPH_PRIMARY_SURFACE_ADDRE
31:8
0x0
SS
Secondary surface address for secondary graphics in byte.
Description
Primary surface address DFQ enable
0=0 = one deep queue mode
1=1 = DFQ mode
Secondary surface address for secondary graphics in byte.
It is 256 byte aligned.
D2GRPH_SECONDARY_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6918]
Field Name
D2GRPH_SECONDARY_DFQ_ENABLE
Bits
0
Default
0x0
(mirror of
D2GRPH_PRIMARY_SURFACE_ADDRESS:D
2GRPH_PRIMARY_DFQ_ENABLE)
D2GRPH_SECONDARY_SURFACE_AD
31:8
0x0
DRESS
Secondary surface address for secondary graphics in byte.
Description
Secondary surface address DFQ enable
0=0 = one deep queue mode
1=1 = DFQ mode
Secondary surface address for secondary graphics in byte.
It is 256 byte aligned.
D2GRPH_PITCH - RW - 32 bits - [GpuF0MMReg:0x6920]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-210
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2GRPH_PITCH
13:0
0x0
Secondary graphic surface pitch in pixels. For
Micro-tiled/Macro-tiled surface, it must be multiple of 64
pixeld in 8bpp mode. For Micro-linear/Macro-tiled surface, it
must be multiple of 256 pixeld in 8bpp mode, multiple of 128
pixels in 16bpp mode and multiple of 64 pixels in 32bpp
mode. For Micro-linear/Macro-linear surface, it must be
multiple of 64 pixels in 8bpp mode. For other modes, it must
be multiple of 32.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
Secondary graphic surface pitch in pixels.
D2GRPH_SURFACE_OFFSET_X - RW - 32 bits - [GpuF0MMReg:0x6924]
Field Name
D2GRPH_SURFACE_OFFSET_X
Bits
12:0
Default
0x0
Description
Secondary graphic X surface offset. It is 256 pixels aligned.
NOTE: Bits 0:7 of this field are hardwired to ZERO.
Secondary graphic X surface offset.
D2GRPH_SURFACE_OFFSET_Y - RW - 32 bits - [GpuF0MMReg:0x6928]
Field Name
D2GRPH_SURFACE_OFFSET_Y
Bits
12:0
Default
0x0
Description
Secondary graphic Y surface offset. It must be even value
NOTE: Bit 0 of this field is hardwired to ZERO.
Secondary graphic Y surface offset.
D2GRPH_X_START - RW - 32 bits - [GpuF0MMReg:0x692C]
Field Name
D2GRPH_X_START
Bits
12:0
Default
0x0
Description
Secondary graphic X start coordinate relative to the desktop
coordinates.
Secondary graphic X start coordinate relative to the desktop coordinates.
D2GRPH_Y_START - RW - 32 bits - [GpuF0MMReg:0x6930]
Field Name
D2GRPH_Y_START
Description
Secondary graphic Y start coordinate relative to the desktop
coordinates.
Secondary graphic Y start coordinate relative to the desktop coordinates.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
12:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-211
Display Controller Registers
D2GRPH_X_END - RW - 32 bits - [GpuF0MMReg:0x6934]
Field Name
D2GRPH_X_END
Bits
13:0
Default
0x0
Description
Secondary graphic X end coordinate relative to the desktop
coordinates. It is exclusive and the maximum value is 8K
Secondary graphic X end coordinate relative to the desktop coordinates.
D2GRPH_Y_END - RW - 32 bits - [GpuF0MMReg:0x6938]
Field Name
D2GRPH_Y_END
Bits
13:0
Default
0x0
Description
Secondary graphic Y end coordinate relative to the desktop
coordinates. It is exclusive and the maximum value is 8K
Secondary graphic Y end coordinate relative to the desktop coordinates.
D2GRPH_UPDATE - RW - 32 bits - [GpuF0MMReg:0x6944]
Field Name
D2GRPH_MODE_UPDATE_PENDING
(R)
Bits
0
Default
0x0
Description
Secondary graphic mode register update pending control. It
is set to 1 after a host write to graphics mode register. It is
cleared after double buffering is done.
This signal is only visible through register.
The graphics surface register includes:
D2GRPH_DEPTH
D2GRPH_FORMAT
D2GRPH_SWAP_RB
D2GRPH_LUT_SEL
D2GRPH_LUT_10BIT_BYPASS_EN
D2GRPH_ENABLE
D2GRPH_X_START
D2GRPH_Y_START
D2GRPH_X_END
D2GRPH_Y_END
D2GRPH_MODE_UPDATE_TAKEN (R)
1
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-212
The mode register double buffering can only occur at
vertical retrace. The double buffering occurs when
D2GRPH_MODE_UPDATE_PENDING = 1 and
D2GRPH_UPDATE_LOCK = 0 and V_UPDATE = 1.
If CRTC2 is disabled, the registers will be updated instantly.
0=No update pending
1=Update pending
Secondary graphics update taken status for mode registers.
It is set to 1 when double buffering occurs and cleared when
V_UPDATE = 0.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2GRPH_SURFACE_UPDATE_PENDIN
G (R)
2
0x0
Secondary graphic surface register update pending control.
If it is set to 1 after a host write to graphics surface register.
It is cleared after double buffering is done. It is cleared after
double buffering is done.
This signal also goes to both the RBBM wait_until and to
the CP_RTS_discrete inputs.
The graphics surface register includes:
D2GRPH_PRIMARY_SURFACE_ADDRESS
D2GRPH_SECONDARY_SURFACE_ADDRESS
D2GRPH_PITCH
D2GRPH_SURFACE_OFFSET_X
D2GRPH_SURFACE_OFFSET_Y.
D2GRPH_SURFACE_UPDATE_TAKEN
(R)
3
0x0
D2GRPH_UPDATE_LOCK
16
0x0
D2GRPH_MODE_DISABLE_MULTIPLE_
UPDATE
24
0x0
D2GRPH_SURFACE_DISABLE_MULTIP
LE_UPDATE
28
0x0
If D2GRPH_SURFACE_UPDATE_H_RETRACE_EN = 0,
the double buffering occurs in vertical retrace when
D2GRPH_SURFACE_UPDATE_PENDING = 1 and
D2GRPH_UPDATE_LOCK = 0 and V_UPDATE = 1.
Otherwise the double buffering happens at horizontal
retrace when D2GRPH_SURFACE_UPDATE_PENDING =
1 and D2GRPH_UPDATE_LOCK = 0 and Data request for
last chunk of the line is sent from DCP to DMIF.
If CRTC2 is disabled, the registers will be updated instantly.
Secondary graphics update taken status for surface
registers. If
D2GRPH_SURFACE_UPDATE_H_RETRACE_EN = 0, it is
set to 1 when double buffering occurs and cleared when
V_UPDATE = 0. Otherwise, it is active for one clock cycle
when double buffering occurs at the horizontal retrace.
Secondary graphic register update lock control. This lock bit
control both surface and mode register double buffer
0=Unlocked
1=Locked
0=D2GRPH mode registers can be updated multiple times
in one V_UPDATE period
1=D2GRPH mode registers can only be updated once in
one V_UPDATE period
0=D2GRPH surface registers can be updated multiple
times in one V_UPDATE period
1=D2GRPH surface registers can only be updated once in
one V_UPDATE period
Secondary graphic update control
D2GRPH_FLIP_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6948]
Field Name
D2GRPH_SURFACE_UPDATE_H_RETR
ACE_EN
Bits
0
Default
0x0
Description
Enable secondary graphic surface register double buffer in
horizontal retrace.
0=Vertical retrace flipping
1=Horizontal retrace flipping
Enable secondary graphic surface register double buffer in horizontal retrace
D2GRPH_SURFACE_ADDRESS_INUSE - RW - 32 bits - [GpuF0MMReg:0x694C]
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-213
Display Controller Registers
Field Name
D2GRPH_SURFACE_ADDRESS_INUSE
(R)
Bits
31:8
Default
0x0
Snapshot of secondary graphics surface address in use
Description
This register reads back snapshot of secondary graphics
surface address used for data request. The address is the
signal sent to DMIF and is updated on SOF or horizontal
surface update. The snapshot is triggered by writing 1 into
field D1CRTC_SNAPSHOT_MANUAL_TRIGGER of CRTC
register D1CRTC_SNAPSHOT_STATUS.
2.7.13 Secondary Display Video Overlay Control Registers
D2OVL_ENABLE - RW - 32 bits - [GpuF0MMReg:0x6980]
Field Name
D2OVL_ENABLE
Bits
0
Default
0x0
Description
Secondary overlay enabled.
0=disable
1=enable
Secondary overlay enabled.
D2OVL_CONTROL1 - RW - 32 bits - [GpuF0MMReg:0x6984]
Field Name
D2OVL_DEPTH
Bits
1:0
Default
0x0
D2OVL_Z
D2OVL_FORMAT
5:4
10:8
0x0
0x0
D2OVL_TILE_COMPACT_EN
12
0x0
D2OVL_ADDRESS_TRANSLATION_EN
ABLE
16
0x0
D2OVL_PRIVILEGED_ACCESS_ENABL
E
17
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-214
Description
Secondary overlay pixel depth
0=reserved
1=16bpp
2=32bpp
3=reserved
Z[1:0] value for tiling
Secondary overlay pixel format. It is used together with
D1OVL_DEPTH to define the overlay format.
If (D1OVL_DEPTH = 0x1)(16 bpp)
0x0- ARGB 1555
0x1 - RGB 565
0x2 - BGRA 5551
others - reserved
else if (D1OVL_DEPTH = 0x2)(32 bpp)
0x0 - ACrYCb 8888 or ARGB 8888
0x1 - ACrYCb 2101010 or ARGB 2101010
0x2 - CbACrA or BGRA 1010102
others - reserved
Enables multichip tile compaction
0=Enables multichip tile compaction
enables Overlay 2 address translation
0=0: physical memory
1=1: virtual memory
Enables overlay 2 privileged page access
0=0: no privileged access
1=1: privileged access
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2OVL_ARRAY_MODE
D2OVL_COLOR_EXPANSION_MODE
23:20
0x0
24
0x0
Defines the tiling mode
0=ARRAY_LINEAR_GENERAL: Unaligned linear array
1=ARRAY_LINEAR_ALIGNED: Aligned linear array
2=ARRAY_1D_TILED_THIN1: Uses 1D 8x8x1 tiles
3=ARRAY_1D_TILED_THICK: Uses 1D 8x8x4 tiles
4=ARRAY_2D_TILED_THIN1: Uses 8x8x1 macro-tiles
5=ARRAY_2D_TILED_THIN2: Macro-tiles are 2x high
6=ARRAY_2D_TILED_THIN4: Macro-tiles are 4x high
7=ARRAY_2D_TILED_THICK: Uses 8x8x4 macro-tiles
8=ARRAY_2B_TILED_THIN1: uses row bank swapping
9=ARRAY_2B_TILED_THIN2: uses row bank swapping
10=ARRAY_2B_TILED_THIN4: uses row bank swapping
11=ARRAY_2B_TILED_THICK: uses row bank swapping
12=ARRAY_3D_TILED_THIN1: Slices are pipe rotated
13=ARRAY_3D_TILED_THICK: Slices are pipe rotated
14=ARRAY_3B_TILED_THIN1: Slices are pipe rotated
15=ARRAY_3B_TILED_THICK: Slices are pipe rotated
Secondary overlay pixel format expansion mode.
0=dynamic expansion for RGB
1=zero expansion for YCbCr
Secondary overlay pixel depth and format.
D2OVL_CONTROL2 - RW - 32 bits - [GpuF0MMReg:0x6988]
Field Name
D2OVL_HALF_RESOLUTION_ENABLE
Bits
0
Default
0x0
Secondary overlay half resolution control
Description
Secondary overlay half resolution control
0=disable
1=enable
D2OVL_SWAP_CNTL - RW - 32 bits - [GpuF0MMReg:0x698C]
Field Name
D2OVL_ENDIAN_SWAP
Bits
1:0
Default
0x0
D2OVL_RED_CROSSBAR
5:4
0x0
D2OVL_GREEN_CROSSBAR
7:6
0x0
D2OVL_BLUE_CROSSBAR
9:8
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
MC endian swap select
0=0=none
1=1=8in16(0xaabb=>0xbbaa)
2=2=8in32(0xaabbccdd=>0xddccbbaa)
3=3=8in64(0xaabbccddeeff0011=>0x1100ffeeddccbbaa)
Red Crossbar select
0=0=select from R
1=1=select from G
2=2=select from B
3=3=select from A
Green Crossbar select
0=0=select from G
1=1=select from B
2=2=select from A
3=3=select from R
Blue Crossbar select
0=0=select from B
1=1=select from A
2=2=select from R
3=3=select from G
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-215
Display Controller Registers
D2OVL_ALPHA_CROSSBAR
11:10
0x0
Alpha Crossbar select
0=0=select from A
1=1=select from R
2=2=select from G
3=3=select from B
Endian swap and component reorder control
D2OVL_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6990]
Field Name
D2OVL_DFQ_ENABLE
D2OVL_SURFACE_ADDRESS
Bits
0
31:8
Default
0x0
0x0
Description
Secondary overlay surface address DFQ enable
Secondary overlay surface base address in byte. It is 256
bytes aligned.
Secondary overlay surface base address in byte.
D2OVL_PITCH - RW - 32 bits - [GpuF0MMReg:0x6998]
Field Name
D2OVL_PITCH
Bits
13:0
Default
0x0
Description
Secondary overlay surface pitch in pixels. For
Micro-tiled/Macro-tiled surface, it must be multiple of 64
pixeld in 8bpp mode. For Micro-linear/Macro-tiled surface, it
must be multiple of 256 pixeld in 8bpp mode, multiple of 128
pixels in 16bpp mode and multiple of 64 pixels in 32bpp
mode. For Micro-linear/Macro-linear surface, it must be
multiple of 64 pixels in 8bpp mode. For other modes, it must
be multiple of 32.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
Secondary overlay surface pitch in pixels.
D2OVL_SURFACE_OFFSET_X - RW - 32 bits - [GpuF0MMReg:0x699C]
Field Name
D2OVL_SURFACE_OFFSET_X
Bits
12:0
Default
0x0
Description
Secondary overlay X surface offset. It is 256 pixels aligned.
NOTE: Bits 0:7 of this field are hardwired to ZERO.
Secondary overlay X surface offset.
D2OVL_SURFACE_OFFSET_Y - RW - 32 bits - [GpuF0MMReg:0x69A0]
Field Name
D2OVL_SURFACE_OFFSET_Y
Bits
12:0
Default
0x0
Description
Secondary overlay Y surface offset. It is even value.
NOTE: Bit 0 of this field is hardwired to ZERO.
Secondary overlay Y surface offset.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-216
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2OVL_START - RW - 32 bits - [GpuF0MMReg:0x69A4]
Field Name
D2OVL_Y_START
Bits
12:0
Default
0x0
Description
Secondary overlay Y start coordinate relative to the desktop
coordinates.
D2OVL_X_START
28:16
0x0
Secondary overlay X start coordinate relative to the desktop
coordinates.
Secondary overlay X, Y start coordinate relative to the desktop coordinates.
D2OVL_END - RW - 32 bits - [GpuF0MMReg:0x69A8]
Field Name
D2OVL_Y_END
Bits
13:0
Default
0x0
Description
Secondary overlay Y end coordinate relative to the desktop
coordinates. It is exclusive and the maximum value is 8K
D2OVL_X_END
29:16
0x0
Secondary overlay X end coordinate relative to the desktop
coordinates. It is exclusive and the maximum value is 8K
Secondary overlay X, Y end coordinate relative to the desktop coordinates.
D2OVL_UPDATE - RW - 32 bits - [GpuF0MMReg:0x69AC]
Field Name
D2OVL_UPDATE_PENDING (R)
Bits
0
Default
0x0
D2OVL_UPDATE_TAKEN (R)
1
0x0
D2OVL_UPDATE_LOCK
16
0x0
D2OVL_DISABLE_MULTIPLE_UPDATE
24
0x0
Description
Secondary overlay register update pending control. It is set
to 1 after a host write to overlay double buffer register. It is
cleared after double buffering is done. The double buffering
occurs when UPDATE_PENDING = 1 and UPDATE_LOCK
= 0 and V_UPDATE = 1.
If CRTC2 is disabled, the registers will be updated instantly.
D2OVL double buffer registers include:
D2OVL_ENABLE
D2OVL_DEPTH
D2OVL_FORMAT
D2OVL_SWAP_RB
D2OVL_COLOR_EXPANSION_MODE
D2OVL_HALF_RESOLUTION_ENABLE
D2OVL_SURFACE_ADDRESS
D2OVL_PITCH
D2OVL_SURFACE_OFFSET_X
D2OVL_SURFACE_OFFSET_Y
D2OVL_START
D2OVL_END
0=No update pending
1=Update pending
Secondary overlay update taken status. It is set to 1 when
double buffering occurs and cleared when V_UPDATE = 0.
Secondary overlay register update lock control.
0=Unlocked
1=Locked
0=D2OVL registers can be updated multiple times in one
V_UPDATE period
1=D2OVL registers can only be updated once in one
V_UPDATE period
Secondary overlay register update
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-217
Display Controller Registers
D2OVL_SURFACE_ADDRESS_INUSE - RW - 32 bits - [GpuF0MMReg:0x69B0]
Field Name
D2OVL_SURFACE_ADDRESS_INUSE
(R)
Bits
31:8
Default
0x0
Description
This register reads back snapshot of secondary overlay
surface address used for data request. The address is the
signal sent to DMIF and is updated on SOF or horizontal
surface update. The snapshot is triggered by writing 1 into
field D1CRTC_SNAPSHOT_MANUAL_TRIGGER of CRTC
register D1CRTC_SNAPSHOT_STATUS.
Snapshot of secondary overlay surface address in use
D2OVL_DFQ_CONTROL - RW - 32 bits - [GpuF0MMReg:0x69B4]
Field Name
D2OVL_DFQ_RESET
D2OVL_DFQ_SIZE
Bits
0
6:4
Default
0x0
0x0
D2OVL_DFQ_MIN_FREE_ENTRIES
10:8
0x0
Control of the deep flip queue for D2 overlay
Description
Reset the deep flip queue
Size of the deep flip queue: 0 = 1 deep queue, 1 = 2 deep
queue,..., 7 = 8 deep queue
Minimum # of free entries before surface pending is
asserted
D2OVL_DFQ_STATUS - RW - 32 bits - [GpuF0MMReg:0x69B8]
Field Name
D2OVL_DFQ_NUM_ENTRIES (R)
D2OVL_DFQ_RESET_FLAG (R)
D2OVL_DFQ_RESET_ACK (W)
Status of the deep flip queue for D2 overlay
Bits
3:0
Default
0x0
8
9
0x0
0x0
Description
# of entries in deep flip queue. 0 = 1 entry, 1 = 2 entries, ... 7
= 8 entries
Sticky bit: Deep flip queue in reset
Clear D2OVL_DFQ_RESET_FLAG
2.7.14 Secondary Display Video Overlay Transform Registers
D2OVL_MATRIX_TRANSFORM_EN - RW - 32 bits - [GpuF0MMReg:0x6A00]
Field Name
D2OVL_MATRIX_TRANSFORM_EN
Bits
0
Default
0x0
Secondary overlay matrix conversion enable.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-218
Description
Secondary overlay matrix conversion enable
0=disable
1=enable
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2OVL_MATRIX_COEF_1_1 - RW - 32 bits - [GpuF0MMReg:0x6A04]
Field Name
D2OVL_MATRIX_COEF_1_1
Bits
18:0
Default
0x198a0
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_1_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_1_2 - RW - 32 bits - [GpuF0MMReg:0x6A08]
Field Name
D2OVL_MATRIX_COEF_1_2
Bits
18:0
Default
0x12a20
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_1_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_1_3 - RW - 32 bits - [GpuF0MMReg:0x6A0C]
Field Name
D2OVL_MATRIX_COEF_1_3
Bits
18:0
Default
0x0
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_1_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_1_4 - RW - 32 bits - [GpuF0MMReg:0x6A10]
Field Name
D2OVL_MATRIX_COEF_1_4
Bits
26:8
Default
0x48700
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S11.1.
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_1_4
31
0x1
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_2_1 - RW - 32 bits - [GpuF0MMReg:0x6A14]
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-219
Display Controller Registers
Field Name
D2OVL_MATRIX_COEF_2_1
Bits
18:0
Default
0x72fe0
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_2_1
31
0x1
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_2_2 - RW - 32 bits - [GpuF0MMReg:0x6A18]
Field Name
D2OVL_MATRIX_COEF_2_2
Bits
18:0
Default
0x12a20
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_2_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_2_3 - RW - 32 bits - [GpuF0MMReg:0x6A1C]
Field Name
D2OVL_MATRIX_COEF_2_3
Bits
18:0
Default
0x79bc0
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_2_3
31
0x1
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_2_4 - RW - 32 bits - [GpuF0MMReg:0x6A20]
Field Name
D2OVL_MATRIX_COEF_2_4
Bits
26:8
Default
0x22100
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S11.1.
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_2_4
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_3_1 - RW - 32 bits - [GpuF0MMReg:0x6A24]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-220
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2OVL_MATRIX_COEF_3_1
18:0
0x0
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_3_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_3_2 - RW - 32 bits - [GpuF0MMReg:0x6A28]
Field Name
D2OVL_MATRIX_COEF_3_2
Bits
18:0
Default
0x12a20
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_3_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_3_3 - RW - 32 bits - [GpuF0MMReg:0x6A2C]
Field Name
D2OVL_MATRIX_COEF_3_3
Bits
18:0
Default
0x20460
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S3.11.
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_3_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_MATRIX_COEF_3_4 - RW - 32 bits - [GpuF0MMReg:0x6A30]
Field Name
D2OVL_MATRIX_COEF_3_4
Bits
26:8
Default
0x3af80
Description
Combined matrix constant of YCbCr->RGB, contrast and
brightness adjustment for secondary overlay. Format
fix-point S11.1.
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D2OVL_MATRIX_SIGN_3_4
31
0x1
Sign bit of combined matrix constant
Combined matrix constant of YCbCr->RGB, contrast and brightness adjustment for secondary overlay.
D2OVL_COLOR_MATRIX_TRANSFORMATION_CNTL - RW - 32 bits - [GpuF0MMReg:0x6940]
Field Name
Bits
Default
D2OVL_COLOR_MATRIX_TRANSFORM
2:0
0x0
ATION_CNTL
Matrix transformation control for secondary display overlay pixels.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Matrix transformation control for secondary display overlay
pixels. It is used when PIX_TYPE is 0.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-221
Display Controller Registers
2.7.15 Secondary Display Video Overlay Gamma Correction Registers
D2OVL_PWL_TRANSFORM_EN - RW - 32 bits - [GpuF0MMReg:0x6A80]
Field Name
D2OVL_PWL_TRANSFORM_EN
Bits
0
Default
0x0
Description
Secondary overlay gamma correction enable.
0=disable
1=enable
Secondary overlay gamma correction enable.
D2OVL_PWL_0TOF - RW - 32 bits - [GpuF0MMReg:0x6A84]
Field Name
D2OVL_PWL_0TOF_OFFSET
Bits
8:0
Default
0x0
Description
Secondary overlay gamma correction non-linear offset for
input 0x0-0xF. Format fix-point 8.1 (0.0 to +255.5).
D2OVL_PWL_0TOF_SLOPE
26:16
0x100
Secondary overlay gamma correction non-linear slope for
input 0x0-0xF. Format fix-point 3.8 (0.00 to +7.99).
Secondary overlay gamma correction non-linear offset and slope for input 0x0-0xF
D2OVL_PWL_10TO1F - RW - 32 bits - [GpuF0MMReg:0x6A88]
Field Name
D2OVL_PWL_10TO1F_OFFSET
Bits
8:0
Default
0x20
Description
Secondary overlay gamma correction non-linear offset for
input 0x10-0x1F. Format fix-point 8.1 (0.0 to +255.5).
D2OVL_PWL_10TO1F_SLOPE
26:16
0x100
Secondary overlay gamma correction non-linear slope for
input 0x10-0x1F. Format fix-point 3.8 (0.00 to +7.99).
Secondary overlay gamma correction non-linear offset and slope for input 0x10-0x1F
D2OVL_PWL_20TO3F - RW - 32 bits - [GpuF0MMReg:0x6A8C]
Field Name
D2OVL_PWL_20TO3F_OFFSET
Bits
9:0
Default
0x40
Description
Secondary overlay gamma correction non-linear offset for
input 0x20-0x3F. Format fix-point 9.1 (0.0 to +511.5).
D2OVL_PWL_20TO3F_SLOPE
25:16
0x100
Secondary overlay gamma correction non-linear slope for
input 0x20-0x3F. Format fix-point 2.8 (0.00 to +3.99).
Secondary overlay gamma correction non-linear offset and slope for input 0x20-0x3F
D2OVL_PWL_40TO7F - RW - 32 bits - [GpuF0MMReg:0x6A90]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-222
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2OVL_PWL_40TO7F_OFFSET
9:0
0x80
Secondary overlay gamma correction non-linear offset for
input 40-7F. Format fix-point 9.1 (0.0 to +511.5).
D2OVL_PWL_40TO7F_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 40-7F. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 40-7F.
D2OVL_PWL_80TOBF - RW - 32 bits - [GpuF0MMReg:0x6A94]
Field Name
D2OVL_PWL_80TOBF_OFFSET
Bits
10:0
Default
0x100
Description
Secondary overlay gamma correction non-linear offset for
input 80-BF. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_80TOBF_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 80-BF. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 80-BF.
D2OVL_PWL_C0TOFF - RW - 32 bits - [GpuF0MMReg:0x6A98]
Field Name
D2OVL_PWL_C0TOFF_OFFSET
Bits
10:0
Default
0x180
Description
Secondary overlay gamma correction non-linear offset for
input C0-FF. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_C0TOFF_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input C0-FF. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input C0-FF.
D2OVL_PWL_100TO13F - RW - 32 bits - [GpuF0MMReg:0x6A9C]
Field Name
D2OVL_PWL_100TO13F_OFFSET
Bits
10:0
Default
0x200
Description
Secondary overlay gamma correction non-linear offset for
input 100-13F. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_100TO13F_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 100-13F. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 100-13F.
D2OVL_PWL_140TO17F - RW - 32 bits - [GpuF0MMReg:0x6AA0]
Field Name
D2OVL_PWL_140TO17F_OFFSET
Description
Secondary overlay gamma correction non-linear offset for
input 140-17F. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_140TO17F_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 140-17F. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 140-17F.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
10:0
Default
0x280
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-223
Display Controller Registers
D2OVL_PWL_180TO1BF - RW - 32 bits - [GpuF0MMReg:0x6AA4]
Field Name
D2OVL_PWL_180TO1BF_OFFSET
Bits
10:0
Default
0x300
Description
Secondary overlay gamma correction non-linear offset for
input 180-1BF. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_180TO1BF_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 180-1BF. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 180-1BF.
D2OVL_PWL_1C0TO1FF - RW - 32 bits - [GpuF0MMReg:0x6AA8]
Field Name
D2OVL_PWL_1C0TO1FF_OFFSET
Bits
10:0
Default
0x380
Description
Secondary overlay gamma correction non-linear offset for
input 1C0-1FF. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_1C0TO1FF_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 1C0-1FF. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 1C0-1FF.
D2OVL_PWL_200TO23F - RW - 32 bits - [GpuF0MMReg:0x6AAC]
Field Name
D2OVL_PWL_200TO23F_OFFSET
Bits
10:0
Default
0x400
Description
Secondary overlay gamma correction non-linear offset for
input 200-23F. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_200TO23F_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 200-23F. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 200-23F.
D2OVL_PWL_240TO27F - RW - 32 bits - [GpuF0MMReg:0x6AB0]
Field Name
D2OVL_PWL_240TO27F_OFFSET
Bits
10:0
Default
0x480
Description
Secondary overlay gamma correction non-linear offset for
input 240-27F. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_240TO27F_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 240-27F. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 240-27F.
D2OVL_PWL_280TO2BF - RW - 32 bits - [GpuF0MMReg:0x6AB4]
Field Name
D2OVL_PWL_280TO2BF_OFFSET
Bits
10:0
Default
0x500
Description
Secondary overlay gamma correction non-linear offset for
input 280-2BF. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_280TO2BF_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 280-2BF. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 280-2BF.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-224
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2OVL_PWL_2C0TO2FF - RW - 32 bits - [GpuF0MMReg:0x6AB8]
Field Name
D2OVL_PWL_2C0TO2FF_OFFSET
Bits
10:0
Default
0x580
Description
Secondary overlay gamma correction non-linear offset for
input 2C0-2FF. Format fix-point 10.1(0.0 to +1023.5).
D2OVL_PWL_2C0TO2FF_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 2C0-2FF. Format fix-point 1.8(0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 2C0-2FF.
D2OVL_PWL_300TO33F - RW - 32 bits - [GpuF0MMReg:0x6ABC]
Field Name
D2OVL_PWL_300TO33F_OFFSET
Bits
10:0
Default
0x600
Description
Secondary overlay gamma correction non-linear offset for
input 300-33F. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_300TO33F_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 300-33F. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 300-33F.
D2OVL_PWL_340TO37F - RW - 32 bits - [GpuF0MMReg:0x6AC0]
Field Name
D2OVL_PWL_340TO37F_OFFSET
Bits
10:0
Default
0x680
Description
Secondary overlay gamma correction non-linear offset for
input 340-37F. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_340TO37F_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 340-37F. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 340-37F.
D2OVL_PWL_380TO3BF - RW - 32 bits - [GpuF0MMReg:0x6AC4]
Field Name
D2OVL_PWL_380TO3BF_OFFSET
Bits
10:0
Default
0x700
Description
Secondary overlay gamma correction non-linear offset for
input 380-3BF. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_380TO3BF_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 380-3BF. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 380-3BF.
D2OVL_PWL_3C0TO3FF - RW - 32 bits - [GpuF0MMReg:0x6AC8]
Field Name
D2OVL_PWL_3C0TO3FF_OFFSET
Description
Secondary overlay gamma correction non-linear offset for
input 3C0-3FF. Format fix-point 10.1 (0.0 to +1023.5).
D2OVL_PWL_3C0TO3FF_SLOPE
24:16
0x100
Secondary overlay gamma correction non-linear slope for
input 3C0-3FF. Format fix-point 1.8 (0.00 to +1.99).
Secondary overlay gamma correction non-linear offset and slope for input 3C0-3FF.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
10:0
Default
0x780
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-225
Display Controller Registers
D2OVL_KEY_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6B00]
Field Name
D2GRPH_KEY_FUNCTION
Bits
1:0
Default
0x0
D2OVL_KEY_FUNCTION
9:8
0x0
D2OVL_KEY_COMPARE_MIX
16
0x0
Secondary display key control
Description
Selects graphic keyer result equation for secondary display.
0=GRPH2_KEY = FALSE = 0
1=GRPH2_KEY = TRUE = 1
2=GPPH2_KEY = (GRPH2_RED in range) AND
(GRPH2_GREEN in range) AND (GRPH2_BLUE in range)
AND (GRPH2_ALPHA in range)
3=GRPH2_KEY = not [(GRPH2_RED in range) AND
(GRPH2_GREEN in range) AND (GRPH2_BLUE in range)
AND (GRPH2_ALPHA in range)]
Selects overlay keyer result equation for secondary display.
0=OVL2_KEY = FALSE = 0
1=OVL2_KEY = TRUE = 1
2=OVL2_KEY = (OVL2_Cr_RED in range) AND
(OVL2_Y_GREEN in range) AND (OVL2_Cb_BLUE in
range) AND (OVL2_ALPHA in range)
3=OVL2_KEY = not [(OVL2_Cr_RED in range) AND
(OVL2_Y_GREEN in range) AND (OVL2_Cb_BLUE in
range) AND (OVL2_ALPHA in range)]
Selects final mix of graphics and overlay keys for secondary
display.
0=GRPH_OVL_KEY = GRPH_KEY or OVL_KEY
1=GRPH_OVL_KEY = GRPH_KEY and OVL_KEY
2.7.16 Secondary Display Graphics and Overlay Blending Registers
D2GRPH_ALPHA - RW - 32 bits - [GpuF0MMReg:0x6B04]
Field Name
D2GRPH_ALPHA
Bits
7:0
Default
0xff
Description
Global graphic alpha for use in key mode and global alpha
modes. See D2OVL_ALPHA_MODE register filed for more
details
Global graphic alpha for use in key mode and global alpha modes.
D2OVL_ALPHA - RW - 32 bits - [GpuF0MMReg:0x6B08]
Field Name
D2OVL_ALPHA
Bits
7:0
Default
0xff
Description
Global overlay alpha for use in key mode and global alpha
modes. See D2OVL_ALPHA_MODE register filed for more
details
Global overlay alpha for use in key mode and global alpha modes.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-226
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2OVL_ALPHA_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6B0C]
Field Name
D2OVL_ALPHA_MODE
Bits
1:0
Default
0x0
D2OVL_ALPHA_PREMULT
8
0x0
D2OVL_ALPHA_INV
16
0x0
Secondary display graphics/overlay alpha blending control
Description
Graphics/overlay alpha blending mode for secondary
controller.
In any case, if there is only graphics, the input OVL_DATA
is forced to blank. If there is only overlay, the input
GRPH_DATA is forced to blank.
0=Keyer mode, select graphic or overlay keyer to mix
graphics and overlay
1=Per pixel graphic alpha mode.Alpha blend graphic and
overlay layer. The alpha from graphic pixel may be inverted
according to register field
2=Global alpha mode
3=Per pixel overlay alpha mode
For use with per pixel alpha blend mode. Selects whether
pre-multiplied alpha or non-multiplied alpha.
0=0x0 - When DxOVL_ALPHA_MODE = 0x1, then Pixel =
PIX_ALPHA * graphics pixel + (1-PIX_ALPHA) * overlay
pixel.When DxOVL_ALPHA_MODE = 0x3, then Pixel =
PIX_ALPHA * overlay pixel + (1-PIX_ALPHA) * graphic
pixel
1=0x1 - When DxOVL_ALPHA_MODE = 0x1, then Pixel =
graphic pixel + (1-PIX_ALPHA) * overlay pixel.When
DxOVL_ALPHA_MODE = 0x3, then Pixel = overlay pixel +
(1-PIX_ALPHA) * graphic pixel
For use with pixel blend mode. Apply optional inversion to
the alpha value extracted form the graphics or overlay
surface data.
0=PIX_ALPHA = alpha from graphics or overlay
1=PIX_ALPHA = 1 - alpha from graphics or overlay
D2GRPH_KEY_RANGE_RED - RW - 32 bits - [GpuF0MMReg:0x6B10]
Field Name
D2GRPH_KEY_RED_LOW
D2GRPH_KEY_RED_HIGH
Bits
15:0
31:16
Default
0x0
0x0
Description
Secondary graphics keyer red component lower limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Secondary graphics keyer red component upper limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Secondary graphics keyer red component range
D2GRPH_KEY_RANGE_GREEN - RW - 32 bits - [GpuF0MMReg:0x6B14]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-227
Display Controller Registers
D2GRPH_KEY_GREEN_LOW
D2GRPH_KEY_GREEN_HIGH
15:0
31:16
0x0
Secondary graphics keyer green component lower limit.
0x0
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Secondary graphics keyer green component upper limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Secondary graphics keyer green component range
D2GRPH_KEY_RANGE_BLUE - RW - 32 bits - [GpuF0MMReg:0x6B18]
Field Name
D2GRPH_KEY_BLUE_LOW
D2GRPH_KEY_BLUE_HIGH
Bits
15:0
31:16
Default
0x0
0x0
Description
Secondary graphics keyer blue component lower limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Secondary graphics keyer blue component upper limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Secondary graphics keyer blue component range
D2GRPH_KEY_RANGE_ALPHA - RW - 32 bits - [GpuF0MMReg:0x6B1C]
Field Name
D2GRPH_KEY_ALPHA_LOW
D2GRPH_KEY_ALPHA_HIGH
Bits
15:0
31:16
Default
0x0
0x0
Description
Secondary graphics keyer alpha component lower limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Secondary graphics keyer alpha component upper limit.
Note: If the graphic component is less than 16 bit, msbs are
all zeros.
Secondary graphics keyer alpha component range
D2OVL_KEY_RANGE_RED_CR - RW - 32 bits - [GpuF0MMReg:0x6B20]
Field Name
D2OVL_KEY_RED_CR_LOW
D2OVL_KEY_RED_CR_HIGH
Bits
9:0
25:16
Default
0x0
0x0
Secondary overlay keyer red component range
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-228
Description
Secondary overlay keyer red component lower limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Secondary overlay keyer red component upper limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2OVL_KEY_RANGE_GREEN_Y - RW - 32 bits - [GpuF0MMReg:0x6B24]
Field Name
D2OVL_KEY_GREEN_Y_LOW
D2OVL_KEY_GREEN_Y_HIGH
Bits
9:0
25:16
Default
0x0
0x0
Description
Secondary overlay keyer green component lower limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Secondary overlay keyer green component upper limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Secondary overlay keyer green component range
D2OVL_KEY_RANGE_BLUE_CB - RW - 32 bits - [GpuF0MMReg:0x6B28]
Field Name
D2OVL_KEY_BLUE_CB_LOW
D2OVL_KEY_BLUE_CB_HIGH
Bits
9:0
25:16
Default
0x0
0x0
Description
Secondary overlay keyer blue component lower limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Secondary overlay keyer blue component upper limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Secondary overlay keyer blue component range
D2OVL_KEY_ALPHA - RW - 32 bits - [GpuF0MMReg:0x6B2C]
Field Name
D2OVL_KEY_ALPHA_LOW
D2OVL_KEY_ALPHA_HIGH
Bits
7:0
23:16
Default
0x0
0x0
Description
Secondary overlay keyer alpha component lower limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Secondary overlay keyer alpha component upper limit.
Note: If the overlay component is less than 16 bit, msbs are
all zeros.
Secondary overlay keyer alpha component range
2.7.17 Secondary Display Color Matrix Transform Registers
D2GRPH_COLOR_MATRIX_TRANSFORMATION_CNTL - RW - 32 bits - [GpuF0MMReg:0x6B80]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-229
Display Controller Registers
D2GRPH_COLOR_MATRIX_TRANSFOR
MATION_EN
0
0x0
Matrix transformation control for secondary display graphics
and cursor pixel. It is used when PIX_TYPE is 1.
0=disable
1=enable
Matrix transformation control for secondary display graphics and cursor pixel.
D2COLOR_MATRIX_COEF_1_1 - RW - 32 bits - [GpuF0MMReg:0x6B84]
Field Name
D2COLOR_MATRIX_COEF_1_1
Bits
16:0
Default
0x0
Description
Combined matrix constant C11 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S1.11(-2.00 to +1.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_1_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C11 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_1_2 - RW - 32 bits - [GpuF0MMReg:0x6B88]
Field Name
D2COLOR_MATRIX_COEF_1_2
Bits
15:0
Default
0x0
Description
Combined matrix constant C12 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S0.11(-1.00 to + 0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_1_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C12 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_1_3 - RW - 32 bits - [GpuF0MMReg:0x6B8C]
Field Name
D2COLOR_MATRIX_COEF_1_3
Bits
15:0
Default
0x0
Description
Combined matrix constant C13 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S0.11(-1.0 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_1_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C13 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_1_4 - RW - 32 bits - [GpuF0MMReg:0x6B90]
Field Name
D2COLOR_MATRIX_COEF_1_4
Bits
26:8
Default
0x0
Description
Combined matrix constant C14 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S11.1(-2048.5 to +2047.5). It includes subtraction
of 512 offset
NOTE: Bits 0:6 of this field are hardwired to ZERO.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-230
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2COLOR_MATRIX_SIGN_1_4
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C14 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_2_1 - RW - 32 bits - [GpuF0MMReg:0x6B94]
Field Name
D2COLOR_MATRIX_COEF_2_1
Bits
15:0
Default
0x0
Description
Combined matrix constant C21 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S0.11(-1.00 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_2_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C21 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_2_2 - RW - 32 bits - [GpuF0MMReg:0x6B98]
Field Name
D2COLOR_MATRIX_COEF_2_2
Bits
16:0
Default
0x0
Description
Combined matrix constant C22 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S1.11(-2.00 to +1.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_2_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C22 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_2_3 - RW - 32 bits - [GpuF0MMReg:0x6B9C]
Field Name
D2COLOR_MATRIX_COEF_2_3
Bits
15:0
Default
0x0
Description
Combined matrix constant C23 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S0.11(-1.00 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_2_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C23 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_2_4 - RW - 32 bits - [GpuF0MMReg:0x6BA0]
Field Name
D2COLOR_MATRIX_COEF_2_4
Bits
26:8
Default
0x0
Description
Combined matrix constant C24 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S11.1(-2048.5 to +2047.5). It includes subtraction
of 512 offset
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_2_4
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C24 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-231
Display Controller Registers
D2COLOR_MATRIX_COEF_3_1 - RW - 32 bits - [GpuF0MMReg:0x6BA4]
Field Name
D2COLOR_MATRIX_COEF_3_1
Bits
15:0
Default
0x0
Description
Combined matrix constant C31 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S0.11(-1.00 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_3_1
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C31 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_3_2 - RW - 32 bits - [GpuF0MMReg:0x6BA8]
Field Name
D2COLOR_MATRIX_COEF_3_2
Bits
15:0
Default
0x0
Description
Combined matrix constant C32 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S0.11(-1.00 to +0.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_3_2
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C32 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_3_3 - RW - 32 bits - [GpuF0MMReg:0x6BAC]
Field Name
D2COLOR_MATRIX_COEF_3_3
Bits
16:0
Default
0x0
Description
Combined matrix constant C33 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S1.11(-2.00 to +1.99).
NOTE: Bits 0:4 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_3_3
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C33 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
D2COLOR_MATRIX_COEF_3_4 - RW - 32 bits - [GpuF0MMReg:0x6BB0]
Field Name
D2COLOR_MATRIX_COEF_3_4
Bits
26:8
Default
0x0
Description
Combined matrix constant C34 of RGB->YCbCr, contrast
and brightness adjustment for secondary display. Format
fix-point S11.1(-2048.5 to +2047.5). It includes subtraction
of 512 offset
NOTE: Bits 0:6 of this field are hardwired to ZERO.
D2COLOR_MATRIX_SIGN_3_4
31
0x0
Sign bit of combined matrix constant
Combined matrix constant C34 of RGB->YCbCr, contrast and brightness adjustment for secondary display.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-232
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
2.7.18 Secondary Display Subsampling Registers
D2COLOR_SPACE_CONVERT - RW - 32 bits - [GpuF0MMReg:0x693C]
Field Name
D2COLOR_SUBSAMPLE_CRCB_MODE
Bits
1:0
Default
0x0
Sub-sampling control for secondary display.
2.7.19
Description
Sub-sampling control for secondary display
0=do not subsample CrCb(RB)
1=subsample CrCb (RB) by using 2 tap average method
2=subsample CrCb (RB) by using 1 tap on even pixel
3=subsample CrCb (RB) by using 1 tap on odd pixel
Secondary Display Realtime Overlay Registers
D2OVL_RT_SKEWCOMMAND - RW - 32 bits - [GpuF0MMReg:0x6D00]
Field Name
D2OVL_RT_CLEAR_GOBBLE_COUNT
(W)
D2OVL_RT_INC_GOBBLE_COUNT (W)
D2OVL_RT_CLEAR_SUBMIT_COUNT
(W)
D2OVL_RT_INC_SUBMIT_COUNT (W)
D2OVL_RT_GOBBLE_COUNT (R)
D2OVL_RT_SUBMIT_COUNT (R)
Bits
0
Default
0x0
4
8
0x0
0x0
12
18:16
0x0
0x0
22:20
0x0
Description
writing 1 to this bit clear the gobbleCount
this bit has higher priority than inc_gobblecount
writing 1 to this bit increments the gobbleCount
writing 1 to this bit clear the submitCount
this bit has higher priority than inc_submitcount
writing 1 to this bit increments the submitCount
read only register
gobble count value which increments with each
inc_gobble_count
and reset with clear_gobble_count commands.
it wraps around on overflow during increment.
read only register
submit count value which increments with each
inc_submit_count
and reset with clear_submit_count commands.
it wraps around on overflow during increment.
reset or increment submit and gobble count
D2OVL_RT_SKEWCONTROL - RW - 32 bits - [GpuF0MMReg:0x6D04]
Field Name
D2OVL_RT_CAPS
Bits
2:0
Default
0x0
D2OVL_RT_SKEW_MAX
controls for submit and gobble counts
6:4
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
max value in submitCount and gobbleCount
this is the number of contents buffer - 1
should reset counters before programming this field
max skew allowed between gobbleCount and submitCount
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-233
Display Controller Registers
D2OVL_RT_BAND_POSITION - RW - 32 bits - [GpuF0MMReg:0x6D08]
Field Name
Bits
Default
D2OVL_RT_TOP_SCAN
13:0
0x0
D2OVL_RT_BTM_SCAN
29:16
0x0
The position of the top and bottom scan line for next RT
Description
define the top scan line for the next RT (inclusive)
define the bottom scan line for next RT (exclusive)
D2OVL_RT_PROCEED_COND - RW - 32 bits - [GpuF0MMReg:0x6D0C]
Field Name
D2OVL_RT_REDUCE_DELAY
Bits
0
Default
0x0
D2OVL_RT_RT_FLIP
4
0x0
0 selects bandSync to be exposed to CP
1 selects frameSync to be exposed to CP
D2OVL_RT_PROCEED_ON_EOF_DISA
BLE
8
0x0
D2OVL_RT_WITH_HELD_ON_SOF
12
0x0
D2OVL_RT_CLEAR_GOBBLE_GO (W)
14
0x0
29:16
0x0
0 enables unfinished bands to pass bandSync on EOF
(valid only in basic scheme)
1 disables this feature
0 disables proceedOnEOF on next frameSync
1 disables proceedOnEOF on next SOF
This bit clear gobbleGo
disable another frame submit before next flip (ignored in
basic scheme)
define the number of scan lines above topscan.
if display starts reading from there, RT should wait
D2OVL_RT_TEAR_PROOF_HEIGHT
select RT flip proceed condition
Description
0 selects delay optimized scheme
1 selects basic render behind delay scan scheme
D2OVL_RT_STAT - RW - 32 bits - [GpuF0MMReg:0x6D10]
Field Name
D2OVL_RT_FIP_PROCEED_ACK (W)
Bits
0
Default
0x0
D2OVL_RT_FRAME_SYNC_ACK (W)
1
0x0
D2OVL_RT_OVL_START_ACK (W)
2
0x0
D2OVL_RT_BAND_INVISIBLE (R)
D2OVL_RT_BAND_SYNC (R)
8
9
0x0
0x0
D2OVL_RT_EOF_PRPCEED (R)
10
0x0
D2OVL_RT_FIP_PROCEED (R)
11
0x0
D2OVL_RT_FRAME_SYNC (R)
12
0x0
D2OVL_RT_GOBBLE_GO (R)
D2OVL_RT_NEW_SUBMIT (R)
D2OVL_RT_OVL_START (R)
13
14
15
0x0
0x0
0x0
D2OVL_RT_OVL_ENDED (R)
16
0x0
D2OVL_RT_SAFE_ZONE (R)
17
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-234
Description
The sticky bit clears the FIP_PROCEED FLAG flag when
written
The sticky bit clears the RT_FRAME_SYNC flag when
written
The sticky bit clears the OVL_START FLAG flag when
written
Debug bit indicating that overlay scanning in invisble region
Debug bit indicating that overlay bottom scan is less the line
counter
Debug bit indicating that overlay is ended. Set at eof and
reset at overlay start
Sticky debug bit that set when RT_FLIP_PROCEED signal
asserted.
Sticky debug bit indicating that overlay start set and a new
submission occured
Debug bit that set on frame_sync and clear at gobbleclr
Debug bit indicating a new submission occurred
Debug bit indicating that line buffer detects start of overlay
being accessed
Debug bit indicating that line buffer detects that the end of
overlay being accessed
Debug bit indicating that overlay is scaning in safe zone
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2OVL_RT_SWITCH_REGIONS (R)
18
0x0
D2OVL_SKEW_MAX_REACHED (R)
19
0x0
31:20
0x0
D2OVL_LINE_COUNTER (R)
Status Bits
Debug bit showing the postion of scan region relative to
display
Debug bit indicating that line buffer detected maximum
skew reached
debug bit showing display line counter value
2.7.20 Secondary Display Hardware Cursor Registers
D2CUR_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6C00]
Field Name
D2CURSOR_EN
Bits
0
Default
0x0
D2CURSOR_MODE
9:8
0x0
D2CURSOR_2X_MAGNIFY
16
0x0
D2CURSOR_FORCE_MC_ON
20
0x0
Secondary display hardware control
Description
Secondary display hardware cursor enabled.
0=disable
1=enable
Secondary display hardware cursor mode.
For 2bpp mode, each line of cursor data is stored in
memory as 16 bits of AND data followed by 16 bits XOR
data.
For color AND/XOR mode, each pixel is stored sequentially
in memory as 32bits each in aRGB8888 format with bit 31
of each DWord being the AND bit.
For the color alpha modes the format is also 32bpp
aRGB8888 with all 8 bits of the alpha being used.All HW
cursor lines must be 64 pixels wide and all lines must be
stored sequentially in memory.
0=Mono (2bpp)
1=Color 24bpp + 1 bit AND (32bpp)
2=Color 24bpp + 8 bit alpha (32bpp) premultiplied alpha
3=Color 24bpp + 8 bit alpha (32bpp)unmultiplied alpha
Secondary display hardware cursor 2x2 magnification.
0=no 2x2 magnification
1=2x2 magnification in horizontal and vertical direction
When set, if the incoming data is in D1 cursor region,
DCP_LB_cursor1_allow_stutter is set. This field in this
double bufferred register is not double buffered.
D2CUR_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6C08]
Field Name
D2CURSOR_SURFACE_ADDRESS
Bits
31:0
Default
0x0
Secondary display hardware cursor surface base address.
Description
Secondary display hardware cursor surface base address
in byte. It is 4K byte aligned.
NOTE: Bits 0:11 of this field are hardwired to ZERO.
D2CUR_SIZE - RW - 32 bits - [GpuF0MMReg:0x6C10]
Field Name
D2CURSOR_HEIGHT
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
5:0
Default
0x0
Description
Secondary display hardware cursor height minus 1.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-235
Display Controller Registers
D2CURSOR_WIDTH
Secondary display hardware size
21:16
0x0
Secondary display hardware cursor width minus 1.
D2CUR_POSITION - RW - 32 bits - [GpuF0MMReg:0x6C14]
Field Name
D2CURSOR_Y_POSITION
Bits
12:0
Default
0x0
D2CURSOR_X_POSITION
28:16
0x0
Description
Secondary display hardware cursor X coordinate at the hot
spot relative to the desktop coordinates.
Secondary display hardware cursor X coordinate at the hot
spot relative to the desktop coordinates.
Secondary display hardware cursor position
D2CUR_HOT_SPOT - RW - 32 bits - [GpuF0MMReg:0x6C18]
Field Name
D2CURSOR_HOT_SPOT_Y
Bits
5:0
Default
0x0
D2CURSOR_HOT_SPOT_X
21:16
0x0
Secondary display hardware cursor hot spot position
Description
Secondary display hardware cursor hot spot X length
relative to the top left corner.
Secondary display hardware cursor hot spot Y length
relative to the top left corner.
D2CUR_COLOR1 - RW - 32 bits - [GpuF0MMReg:0x6C1C]
Field Name
D2CUR_COLOR1_BLUE
Bits
7:0
Default
0x0
D2CUR_COLOR1_GREEN
15:8
0x0
D2CUR_COLOR1_RED
23:16
0x0
Description
Secondary display hardware cursor blue component of
color 1.
Secondary display hardware cursor green component of
color 1.
Secondary display hardware cursor red component of color
1.
Secondary display hardware cursor color 1.
D2CUR_COLOR2 - RW - 32 bits - [GpuF0MMReg:0x6C20]
Field Name
D2CUR_COLOR2_BLUE
Bits
7:0
Default
0x0
D2CUR_COLOR2_GREEN
15:8
0x0
D2CUR_COLOR2_RED
23:16
0x0
Secondary display hardware cursor color 2.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-236
Description
Secondary display hardware cursor blue component of
color 2.
Secondary display hardware cursor green component of
color 2.
Secondary display hardware cursor red component of color
2.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2CUR_UPDATE - RW - 32 bits - [GpuF0MMReg:0x6C24]
Field Name
D2CURSOR_UPDATE_PENDING (R)
Bits
0
Default
0x0
D2CURSOR_UPDATE_TAKEN (R)
1
0x0
D2CURSOR_UPDATE_LOCK
16
0x0
D2CURSOR_DISABLE_MULTIPLE_UPD
ATE
24
0x0
Description
Secondary display hardware cursor update pending status.
It is set to 1 after a host write to cursor double buffer
register. It is cleared after double buffering is done. The
double buffering occurs when
D2CURSOR_UPDATE_PENDING = 1 and
D2CURSOR_UPDATE_LOCK = 0 and V_UPDATE = 1.
If CRTC2 is disabled, the registers will be updated instantly.
The D2CUR double buffer registers are:
D2CURSOR_EN
D2CURSOR_MODE
D2CURSOR_2X_MAGNIFY
D2CURSOR_SURFACE_ADDRESS
D2CURSOR_HEIGHT
D2CURSOR_WIDTH
D2CURSOR_X_POSITION
D2CURSOR_Y_POSITION
D2CURSOR_HOT_SPOT_X
D2CURSOR_HOT_SPOT_Y
0=No update pending
1=Update pending
Secondary display hardware cursor update taken status. It
is set to 1 when double buffering occurs and cleared when
V_UPDATE = 0
Secondary display hardware cursor update lock control.
0=Unlocked
1=Locked
0=D2CURSOR registers can be updated multiple times in
one V_UPDATE period
1=D2CURSOR registers can only be updated once in one
V_UPDATE period
2.7.21 Secondary Display Hardware Icon Registers
D2ICON_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6C40]
Field Name
D2ICON_ENABLE
Bits
0
Default
0x0
D2ICON_2X_MAGNIFY
16
0x0
D2ICON_FORCE_MC_ON
20
0x0
Secondary display hardware icon control.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Secondary display hardware icon enable.
0=disable
1=enable
Secondary display hardware icon 2x2 magnification.
0=no 2x2 magnification
1=2x2 magnification in horizontal and vertical direction
When set, if the incoming data is in D1 icon region,
DCP_LB_icon2_allow_stutter is set. This field in this double
bufferred register is not double buffered.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-237
Display Controller Registers
D2ICON_SURFACE_ADDRESS - RW - 32 bits - [GpuF0MMReg:0x6C48]
Field Name
D2ICON_SURFACE_ADDRESS
Bits
31:0
Default
0x0
Description
Secondary display hardware icon surface base address in
byte. It is 4K byte aligned.
NOTE: Bits 0:11 of this field are hardwired to ZERO.
Secondary display hardware icon surface base address.
D2ICON_SIZE - RW - 32 bits - [GpuF0MMReg:0x6C50]
Field Name
D2ICON_HEIGHT
D2ICON_WIDTH
Secondary display hardware icon size.
Bits
6:0
22:16
Default
0x0
0x0
Description
Secondary display hardware icon height minus 1.
Secondary display hardware icon width minus 1.
D2ICON_START_POSITION - RW - 32 bits - [GpuF0MMReg:0x6C54]
Field Name
D2ICON_Y_POSITION
Bits
12:0
D2ICON_X_POSITION
28:16
Default
0x0
0x0
Description
Secondary display hardware icon Y start coordinate related
to the desktop coordinates.
Note: Icon can not be off the top and off the left edge of the
display surface. But can be off the bottom and off the right
edge of the display.
Secondary display hardware icon X start coordinate relative
to the desktop coordinates.
Note: Icon can not be off the top and off the left edge of the
display surface. But can be off the bottom and off the right
edge of the display.
Secondary display hardware icon position
D2ICON_COLOR1 - RW - 32 bits - [GpuF0MMReg:0x6C58]
Field Name
D2ICON_COLOR1_BLUE
Bits
7:0
Default
0x0
D2ICON_COLOR1_GREEN
15:8
0x0
D2ICON_COLOR1_RED
Secondary display hardware icon color 1.
23:16
0x0
Description
Secondary display hardware icon blue component of color
1.
Secondary display hardware icon green component of color
1.
Secondary display hardware icon red component of color 1.
D2ICON_COLOR2 - RW - 32 bits - [GpuF0MMReg:0x6C5C]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-238
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
D2ICON_COLOR2_BLUE
7:0
0x0
D2ICON_COLOR2_GREEN
15:8
0x0
D2ICON_COLOR2_RED
Secondary display hardware icon color 2.
23:16
0x0
Secondary display hardware icon blue component of color
2.
Secondary display hardware icon green component of color
2.
Secondary display hardware icon red component of color 2.
D2ICON_UPDATE - RW - 32 bits - [GpuF0MMReg:0x6C60]
Field Name
D2ICON_UPDATE_PENDING (R)
Bits
0
Default
0x0
D2ICON_UPDATE_TAKEN (R)
1
0x0
D2ICON_UPDATE_LOCK
16
0x0
D2ICON_DISABLE_MULTIPLE_UPDATE
24
0x0
Description
Secondary display hardware icon update Pending status. It
is set to 1 after a host write to icon double buffer register. It
is cleared after double buffering is done. The double
buffering occurs when D2ICON_UPDATE_PENDING = 1
and D2ICON_UPDATE_LOCK = 0 and V_UPDATE = 1.
If CRTC2 is disabled, the registers will be updated instantly.
D2IOCN double buffer registers include :
D2ICON_ENABLE
D2ICON_2X_MAGNIFY
D2ICON_SURFACE_ADDRESS
D2ICON_HEIGHT
D2ICON_WIDTH
D2ICON_Y_POSITION
D2ICON_X_POSITION
0=No update pending
1=Update pending
Secondary display hardware icon update Taken status. It is
set to 1 when double buffering occurs and cleared when
V_UPDATE = 0
Secondary display hardware icon update lock control.
0=Unlocked
1=Locked
0=D2ICON registers can be updated multiple times in one
V_UPDATE period
1=D2ICON registers can only be updated once in one
V_UPDATE period
Secondary display hardware icon update control
2.7.22 Secondary Display Multi-VPU Control Registers
D2CRTC_MVP_STATUS - RW - 32 bits - [GpuF0MMReg:0x685C]
Field Name
D2CRTC_FLIP_NOW_OCCURRED (R)
D2CRTC_FLIP_NOW_CLEAR (W)
Bits
0
Default
0x0
16
0x0
Description
Reports whether flip_now has occurred. A sticky bit.
0 = has not occurred
1 = has occurred
Clears the sticky bit D2CRTC_FLIP_NOW_OCCURRED
when written with '1'
Reports status for MVP flipping in CRTC2
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-239
Display Controller Registers
D2_MVP_AFR_FLIP_MODE - RW - 32 bits - [GpuF0MMReg:0x65E8]
Field Name
Bits
Default
D2_MVP_AFR_FLIP_MODE
1:0
0x0
S/W writes to this register in AFR mode for display 2 page flip
Description
10 - real flip; 11 - dummy flip
D2_MVP_AFR_FLIP_FIFO_CNTL - RW - 32 bits - [GpuF0MMReg:0x65EC]
Field Name
D2_MVP_AFR_FLIP_FIFO_NUM_ENTRI
ES (R)
D2_MVP_AFR_FLIP_FIFO_RESET
D2_MVP_AFR_FLIP_FIFO_RESET_FLA
G (R)
D2_MVP_AFR_FLIP_FIFO_RESET_ACK
Bits
3:0
Default
0x0
4
8
0x0
0x0
reset the AFR flip FIFO
sticky bit of the AFR flip fifo reset status
12
0x0
clear the DC_LB_MVP_AFR_FLIP_RESET_FLAG register
bit
This register controls AFR Flip FIFO in display 2
Description
number of valid entries in the AFR flip FIFO
D2_MVP_FLIP_LINE_NUM_INSERT - RW - 32 bits - [GpuF0MMReg:0x65F0]
Field Name
D2_MVP_FLIP_LINE_NUM_INSERT_MO
DE
Bits
1:0
Default
0x2
Description
00 - no insertion, 0 is appended; 01 - debug: insert
D2_MVP_FLIP_LINE_NUM_INSERT regiser value; 10 normal Hsync mode, insert the sum of LB line number +
DC_LB_MVP_FLIP_LINE_NUM_OFFSET
D2_MVP_FLIP_LINE_NUM_INSERT
21:8
0x0
used for debug purpose, this is what will be the line number
carried to downstream GPUs if
D2_MVP_FLIP_LINE_NUM_INSERT_EN is set
D2_MVP_FLIP_LINE_NUM_OFFSET
29:24
0x0
used in normal HSYNC flipping operation. this is the
number added to the current LB (desktop) line number for
carrying to the downstream GPUs
D2_MVP_FLIP_AUTO_ENABLE
30
0x0
Enabling automatic AFR/SFR flipping for display 2
This register controls line number insertion for the Hsync flipping mode in display 2
2.7.23 Display Look Up Table Control Registers
DC_LUT_RW_SELECT - RW - 32 bits - [GpuF0MMReg:0x6480]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-240
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
DC_LUT_RW_SELECT
0
0x0
LUT host Read/write selection.
0=Host reads/writes to the LUT access the lower half of
the LUT
1=Host reads/writes to the LUT access the upper half of
the LUT
LUT host Read/write selection.
DC_LUT_RW_MODE - RW - 32 bits - [GpuF0MMReg:0x6484]
Field Name
DC_LUT_RW_MODE
Bits
0
Default
0x0
LUT host read/write mode.
Description
LUT host read/write mode.
0=Host reads/writes to the LUT in 256-entry table mode
1=Host reads/writes to the LUT in piece wise linear (PWL)
mode
DC_LUT_RW_INDEX - RW - 32 bits - [GpuF0MMReg:0x6488]
Field Name
DC_LUT_RW_INDEX
Bits
7:0
Default
0x0
LUT index for host read/write.
Description
LUT index for host read/write.
In 256-entry table mode: LUT_ADDR[6:0] = INDEX[7:1].
INDEX[0] is used to select LUT lower or upper 10 bits.
In piece wise linear (PWL) mode: LUT_ADDR[6:0] =
INDEX[6:0]. INDEX[7] is not used
DC_LUT_SEQ_COLOR - RW - 32 bits - [GpuF0MMReg:0x648C]
Field Name
DC_LUT_SEQ_COLOR
Bits
15:0
Default
0x0
Description
Sequential 10-bit R,G,B host read/write for LUT 256-entry
table mode. After reset or writing DC_LUT_RW_INDEX
register, first DC_LUT_SEQ_COLOR access is for red
component, the second one is for green component and the
third one is for blue component. Always access this register
three times for one LUT entry in LUT 256-entry table mode.
The LUT index is increased by 1 when LUT blue data is
accessed. This allow you to access the next LUT entry
without programming DC_LUT_RW_INDEX again.
NOTE: Bits 0:5 of this field are hardwired to ZERO.
Sequential 10-bit R,G,B host read/write for LUT 256-entry table mode.
DC_LUT_PWL_DATA - RW - 32 bits - [GpuF0MMReg:0x6490]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-241
Display Controller Registers
DC_LUT_BASE
15:0
0x0
DC_LUT_DELTA
31:16
0x0
Linear interpolation of base value for host read/write.
NOTE: Bits 0:5 of this field are hardwired to ZERO.
Linear interpolation of delta value for host read/write. The
LUT index is increased by 1 when register
DC_LUT_PWL_DATA is accessed.
NOTE: Bits 0:5 of this field are hardwired to ZERO.
Linear interpolation of base and delta host read/write for LUT PWL mode
DC_LUT_30_COLOR - RW - 32 bits - [GpuF0MMReg:0x6494]
Field Name
DC_LUT_COLOR_10_BLUE
Bits
9:0
Default
0x0
DC_LUT_COLOR_10_GREEN
19:10
0x0
DC_LUT_COLOR_10_RED
29:20
0x0
Host read/write LUT R,G,B value for LUT 256-entry table mode
Description
10-bit blue value for host read/write. The LUT index is
increased by 1 when register DC_LUT_30_COLOR is
accessed.
10-bit green value for host read/write.
10-bit red value for host read/write.
DC_LUT_READ_PIPE_SELECT - RW - 32 bits - [GpuF0MMReg:0x6498]
Field Name
DC_LUT_READ_PIPE_SELECT
Bits
0
Default
0x0
LUT pipe selection for host read.
Description
LUT pipe selection for host read.
0=Host read select pipe 0
1=Host read select pipe 1
DC_LUT_WRITE_EN_MASK - RW - 32 bits - [GpuF0MMReg:0x649C]
Field Name
DC_LUT_WRITE_EN_MASK
Bits
5:0
Default
0x3f
Bit[0] - For pipe 1, B macro
Bit[1] - For pipe 1, G macro
Bit[2] - For pipe 1, R macro
Bit[3] - For pipe 0, B macro
Bit[4] - For pipe 0, G macro
Bit[5] - For pipe 0, R macro
Look-up table macro write enable mask for host write.
Field Name
Description
Look-up table macro write enable mask for host write.
For each bit
0 - host write disable
1 - host write enable
DC_LUT_AUTOFILL - RW - 32 bits - [GpuF0MMReg:0x64A0]
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-242
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
DC_LUT_AUTOFILL (W)
0
0x0
DC_LUT_AUTOFILL_DONE (R)
1
0x0
LUT autofill control
Enable LUT autofill when 1 is written into this field
0=No effect
1=Start LUT autofill
LUT autofill is done
0=LUT autofill is not completed
1=LUT autofill is done
2.7.24 Display Controller Look Up Table A Registers
DC_LUTA_CONTROL - RW - 32 bits - [GpuF0MMReg:0x64C0]
Field Name
DC_LUTA_INC_B
Bits
3:0
Default
0x0
Description
Exponent of Power-of-two of blue data increment of LUTA
palette.
If INC = 0, LUT 256-entry table mode is enabled.
LUT_INDEX = PIX_DATA[7:0].
Output = LUT_DATA[LUT_INDEX].
DC_LUTA_DATA_B_SIGNED_EN
4
0x0
DC_LUTA_DATA_B_FLOAT_POINT_EN
5
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
If INC > 0, LUT PWL mode is enabled with 128 entries of
base and delta values.
LUT_INDEX = PIX_DATA[INC+6:INC].
Mult = PIX_DATA[INC-1:0].
Base = LUT_BASE[LUT_INDEX].
Delta = LUT_DELTA[LUT_INDEX].
Output = Base + (Mult * Delta) / increment
0=Blue data increment = N/A
1=Blue data increment = 2
2=Blue data increment = 4
3=Blue data increment = 8
4=Blue data increment = 16
5=Blue data increment = 32
6=Blue data increment = 64
7=Blue data increment = 128
8=Blue data increment = 256
9=Blue data increment = 512
Frame buffer blue data signed enable for look-up table A.
0=Blue data is unsigned
1=Blue data is signed
Frame buffer blue data float point enable for look-up table
A.
0=Blue data is fix point
1=Blue data is float point
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-243
Display Controller Registers
DC_LUTA_INC_G
11:8
0x0
Exponent of Power-of-two of green data increment of LUTA
palette.
If INC = 0, LUT 256-entry table mode is enabled.
LUT_INDEX = PIX_DATA[7:0].
Output = LUT_DATA[LUT_INDEX].
DC_LUTA_DATA_G_SIGNED_EN
12
0x0
DC_LUTA_DATA_G_FLOAT_POINT_EN
13
0x0
19:16
0x0
DC_LUTA_INC_R
If INC > 0, LUT PWL mode is enabled with 128 entries of
base and delta values.
LUT_INDEX = PIX_DATA[INC+6:INC].
Mult = PIX_DATA[INC-1:0].
Base = LUT_BASE[LUT_INDEX].
Delta = LUT_DELTA[LUT_INDEX].
Output = Base + (Mult * Delta) / increment
0=Green data increment = N/A
1=Green data increment = 2
2=Green data increment = 4
3=Green data increment = 8
4=Green data increment = 16
5=Green data increment = 32
6=Green data increment = 64
7=Green data increment = 128
8=Green data increment = 256
9=Green data increment = 512
Frame buffer green data signed enable for look-up table A.
0=Green data is unsigned
1=Green data is signed
Frame buffer green data float point enable for look-up table
A.
0=Green data is fix point
1=Green data is float point
Exponent of Power-of-two of red data increment of LUTA
palette.
If INC = 0, LUT 256-entry table mode is enabled.
LUT_INDEX = PIX_DATA[7:0].
Output = LUT_DATA[LUT_INDEX].
DC_LUTA_DATA_R_SIGNED_EN
20
0x0
DC_LUTA_DATA_R_FLOAT_POINT_EN
21
0x0
If INC > 0, LUT PWL mode is enabled with 128 entries of
base and delta values.
LUT_INDEX = PIX_DATA[INC+6:INC].
Mult = PIX_DATA[INC-1:0].
Base = LUT_BASE[LUT_INDEX].
Delta = LUT_DELTA[LUT_INDEX].
Output = Base + (Mult * Delta) / increment
0=Red data increment = N/A
1=Red data increment = 2
2=Red data increment = 4
3=Red data increment = 8
4=Red data increment = 16
5=Red data increment = 32
6=Red data increment = 64
7=Red data increment = 128
8=Red data increment = 256
9=Red data increment = 512
Frame buffer red data signed enable for look-up table A.
0=Red data is unsigned
1=Red data is signed
Frame buffer red data float point enable for look-up table A.
0=Red data is fix point
1=Red data is float point
LUTA mode control
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-244
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
DC_LUTA_BLACK_OFFSET_BLUE - RW - 32 bits - [GpuF0MMReg:0x64C4]
Field Name
Bits
DC_LUTA_BLACK_OFFSET_BLUE
15:0
Black value offset of blue component for LUTA.
Default
0x0
Description
Black value offset of blue component for LUTA.
DC_LUTA_BLACK_OFFSET_GREEN - RW - 32 bits - [GpuF0MMReg:0x64C8]
Field Name
Bits
DC_LUTA_BLACK_OFFSET_GREEN
15:0
Black value offset of green component for LUTA.
Default
0x0
Description
Black value offset of green component for LUTA.
DC_LUTA_BLACK_OFFSET_RED - RW - 32 bits - [GpuF0MMReg:0x64CC]
Field Name
Bits
DC_LUTA_BLACK_OFFSET_RED
15:0
Black value offset of red component for LUTA.
Default
0x0
Description
Black value offset of red component for LUTA.
DC_LUTA_WHITE_OFFSET_BLUE - RW - 32 bits - [GpuF0MMReg:0x64D0]
Field Name
Bits
DC_LUTA_WHITE_OFFSET_BLUE
15:0
White value offset of blue component for LUTA.
Default
0xffff
Description
White value offset of blue component for LUTA
DC_LUTA_WHITE_OFFSET_GREEN - RW - 32 bits - [GpuF0MMReg:0x64D4]
Field Name
Bits
DC_LUTA_WHITE_OFFSET_GREEN
15:0
White value offset of green component for LUTA
Default
0xffff
Description
White value offset of green component for LUTA
DC_LUTA_WHITE_OFFSET_RED - RW - 32 bits - [GpuF0MMReg:0x64D8]
Field Name
Bits
DC_LUTA_WHITE_OFFSET_RED
15:0
White value offset of red component for LUTA
© 2007 Advanced Micro Devices, Inc.
Proprietary
Default
0xffff
Description
White value offset of red component for LUTA
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-245
Display Controller Registers
2.7.25 Display Controller Look Up Table B Registers
DC_LUTB_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6CC0]
Field Name
DC_LUTB_INC_B
Bits
3:0
Default
0x0
Description
Exponent of Power-of-two of blue data increment of LUTB
palette.
If INC = 0, LUT 256-entry table mode is enabled.
LUT_INDEX = PIX_DATA[7:0].
Output = LUT_DATA[LUT_INDEX].
DC_LUTB_DATA_B_SIGNED_EN
4
0x0
DC_LUTB_DATA_B_FLOAT_POINT_EN
5
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-246
If INC > 0, LUT PWL mode is enabled with 128 entries of
base and delta values.
LUT_INDEX = PIX_DATA[INC+6:INC].
Mult = PIX_DATA[INC-1:0].
Base = LUT_BASE[LUT_INDEX].
Delta = LUT_DELTA[LUT_INDEX].
Output = Base + (Mult * Delta) / increment
0=Blue data increment = N/A
1=Blue data increment = 2
2=Blue data increment = 4
3=Blue data increment = 8
4=Blue data increment = 16
5=Blue data increment = 32
6=Blue data increment = 64
7=Blue data increment = 128
8=Blue data increment = 256
9=Blue data increment = 512
Frame buffer blue data signed enable for look-up table A.
0=Blue data is unsigned
1=Blue data is signed
Frame buffer blue data float point enable for look-up table
A.
0=Blue data is fix point
1=Blue data is float point
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
DC_LUTB_INC_G
11:8
0x0
Exponent of Power-of-two of green data increment of LUTB
palette.
If INC = 0, LUT 256-entry table mode is enabled.
LUT_INDEX = PIX_DATA[7:0].
Output = LUT_DATA[LUT_INDEX].
DC_LUTB_DATA_G_SIGNED_EN
12
0x0
DC_LUTB_DATA_G_FLOAT_POINT_EN
13
0x0
19:16
0x0
DC_LUTB_INC_R
If INC > 0, LUT PWL mode is enabled with 128 entries of
base and delta values.
LUT_INDEX = PIX_DATA[INC+6:INC].
Mult = PIX_DATA[INC-1:0].
Base = LUT_BASE[LUT_INDEX].
Delta = LUT_DELTA[LUT_INDEX].
Output = Base + (Mult * Delta) / increment
0=Green data increment = N/A
1=Green data increment = 2
2=Green data increment = 4
3=Green data increment = 8
4=Green data increment = 16
5=Green data increment = 32
6=Green data increment = 64
7=Green data increment = 128
8=Green data increment = 256
9=Green data increment = 512
Frame buffer green data signed enable for look-up table A.
0=Green data is unsigned
1=Green data is signed
Frame buffer green data float point enable for look-up table
A.
0=Green data is fix point
1=Green data is float point
Exponent of Power-of-two of red data increment of LUTB
palette.
If INC = 0, LUT 256-entry table mode is enabled.
LUT_INDEX = PIX_DATA[7:0].
Output = LUT_DATA[LUT_INDEX].
DC_LUTB_DATA_R_SIGNED_EN
20
0x0
DC_LUTB_DATA_R_FLOAT_POINT_EN
21
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
If INC > 0, LUT PWL mode is enabled with 128 entries of
base and delta values.
LUT_INDEX = PIX_DATA[INC+6:INC].
Mult = PIX_DATA[INC-1:0].
Base = LUT_BASE[LUT_INDEX].
Delta = LUT_DELTA[LUT_INDEX].
Output = Base + (Mult * Delta) / increment
0=Red data increment = N/A
1=Red data increment = 2
2=Red data increment = 4
3=Red data increment = 8
4=Red data increment = 16
5=Red data increment = 32
6=Red data increment = 64
7=Red data increment = 128
8=Red data increment = 256
9=Red data increment = 512
Frame buffer red data signed enable for look-up table A.
0=Red data is unsigned
1=Red data is signed
Frame buffer red data float point enable for look-up table A.
0=Red data is fix point
1=Red data is float point
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-247
Display Controller Registers
LUTB mode control
DC_LUTB_BLACK_OFFSET_BLUE - RW - 32 bits - [GpuF0MMReg:0x6CC4]
Field Name
Bits
DC_LUTB_BLACK_OFFSET_BLUE
15:0
Black value offset of blue component for LUTB.
Default
0x0
Description
Black value offset of blue component for LUTB.
DC_LUTB_BLACK_OFFSET_GREEN - RW - 32 bits - [GpuF0MMReg:0x6CC8]
Field Name
Bits
DC_LUTB_BLACK_OFFSET_GREEN
15:0
Black value offset of green component for LUTB.
Default
0x0
Description
Black value offset of green component for LUTB.
DC_LUTB_BLACK_OFFSET_RED - RW - 32 bits - [GpuF0MMReg:0x6CCC]
Field Name
Bits
DC_LUTB_BLACK_OFFSET_RED
15:0
Black value offset of red component for LUTB.
Default
0x0
Description
Black value offset of red component for LUTB.
DC_LUTB_WHITE_OFFSET_BLUE - RW - 32 bits - [GpuF0MMReg:0x6CD0]
Field Name
Bits
DC_LUTB_WHITE_OFFSET_BLUE
15:0
White value offset of blue component for LUTB.
Default
0xffff
Description
White value offset of blue component for LUTB
DC_LUTB_WHITE_OFFSET_GREEN - RW - 32 bits - [GpuF0MMReg:0x6CD4]
Field Name
Bits
DC_LUTB_WHITE_OFFSET_GREEN
15:0
White value offset of green component for LUTB
Default
0xffff
Description
White value offset of green component for LUTB
DC_LUTB_WHITE_OFFSET_RED - RW - 32 bits - [GpuF0MMReg:0x6CD8]
Field Name
Bits
DC_LUTB_WHITE_OFFSET_RED
15:0
White value offset of red component for LUTB
Default
0xffff
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-248
Description
White value offset of red component for LUTB
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
2.7.26 Display Controller CRC Registers
DCP_CRC_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6C80]
Field Name
DCP_CRC_ENABLE
DCP_CRC_DISPLAY_SEL
Bits
0
1
Default
0x0
0x0
DCP_CRC_SOURCE_SEL
4:2
0x0
DCP CRC control
Description
Enable DCP CRC.
Select display number for DCP CRC.
0= from display 1
1= from display 2
Select data source for DCP CRC.
0=DCP to LB pixel data
1=Lower 32 bits of graphics input data to DCP from DMIF
2=Upper 32 bits of graphics input data to DCP from DMIF
3=Overlay input data to DCP from DMIF
4=DCP to LB control signals TAG[2:0] and end of chunk
DCP_CRC_MASK - RW - 32 bits - [GpuF0MMReg:0x6C84]
Field Name
DCP_CRC_MASK
Bits
31:0
Default
0x0
Mask bits to apply to DCP CRC function.
Description
Mask bits to apply to DCP CRC function. Allows CRC of
only specific color and/or specific bits if wanted. Igore those
bits with mask bits to be 0
DCP_CRC_P0_CURRENT - RW - 32 bits - [GpuF0MMReg:0x6C88]
Field Name
Bits
DCP_CRC_P0_CURRENT (R)
31:0
Current value of CRC for current frame pipe 0.
Default
0x0
Description
Current value of CRC for current frame pipe 0.
DCP_CRC_P1_CURRENT - RW - 32 bits - [GpuF0MMReg:0x6C8C]
Field Name
Bits
DCP_CRC_P1_CURRENT (R)
31:0
Current value of CRC for current frame pipe 1.
Default
0x0
Description
Current value of CRC for current frame pipe 1.
DCP_CRC_P0_LAST - RW - 32 bits - [GpuF0MMReg:0x6C90]
Field Name
Bits
DCP_CRC_P0_LAST (R)
31:0
Final value of CRC for previous frame pipe 0.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Default
0x0
Description
Final value of CRC for previous frame pipe 0.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-249
Display Controller Registers
DCP_CRC_P1_LAST - RW - 32 bits - [GpuF0MMReg:0x6C94]
Field Name
Bits
DCP_CRC_P1_LAST (R)
31:0
Final value of CRC for previous frame pipe 1.
2.7.27
Default
0x0
Description
Final value of CRC for previous frame pipe 1.
Display/Memory Interface Control and Status Registers
DCP_TILING_CONFIG - RW - 32 bits - [GpuF0MMReg:0x6CA0]
Bits
3:1
Default
0x3
BANK_TILING
5:4
0x0
GROUP_SIZE
7:6
0x0
ROW_TILING
10:8
0x2
PIPE_TILING
Field Name
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-250
Description
This specifies the number of logical rendering pipes to use
in the tiling pattern.
Typically this should match the
number of memory channels.
0=CONFIG_1_PIPE: 1 logical rendering pipe
1=CONFIG_2_PIPE: 2 logical rendering pipes
2=CONFIG_4_PIPE: 4 logical rendering pipes
3=CONFIG_8_PIPE: 8 logical rendering pipes
This specifies the number of logical banks to use in the tiling
pattern.
Typically this should match the number of
physical banks in the DRAMs,
though it can be smaller
(e.g. for DRAMs that have more banks than the tiling
supports)
or larger (e.g. if rank selection is treated as a
logical bank bit).
0=CONFIG_4_BANK: 4 logical DRAM banks
1=CONFIG_8_BANK: 8 logical DRAM banks
This specifies the memory interleave group size.
All
surfaces must be aligned to start at a group interleave
boundary.
Sequential reads or writes in device address
space access this many bytes from each memory channel
in turn.
Therefore this value determines the maximum
DRAM burst size for sequential accesses.
0=CONFIG_256B_GROUP: 256B memory interleve
groups
1=CONFIG_512B_GROUP: 512B memory interleve
groups
This specifies a DRAM row size for use in tiling, within a
given bank of a given
memory channel. This may be
smaller than the actual DRAM row size, but should not be
larger.
The tiling pattern switches banks at these row
boundaries and clients may also use this field to determine
whether two accesses might be in the same row.
These
strategies are not effective for scattered virtual memorty
mappings.
0=CONFIG_1KB_ROW: Treat 1KB as DRAM row
boundary
1=CONFIG_2KB_ROW: Treat 2KB as DRAM row
boundary
2=CONFIG_4KB_ROW: Treat 4KB as DRAM row
boundary
3=CONFIG_8KB_ROW: Treat 8KB as DRAM row
boundary
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
BANK_SWAPS
13:11
0x1
SAMPLE_SPLIT
15:14
0x3
When performing display reads, this specifies the maximum
number of bytes
accessed per memory channel within
each bank before switching banks. This affects the DRAM
burst length for display accesses. The actual burst length
may be less, depending on the row size above and on
whether
the display access starts in the middle of a bank
swap sequence. This also ensures that crossing a
DRAM row boundary switches banks, provided that the
virtual page mapping is aligned properly.
0=CONFIG_128B_SWAPS: Perform bank swap after
128B
1=CONFIG_256B_SWAPS: Perform bank swap after
256B
2=CONFIG_512B_SWAPS: Perform bank swap after
512B
3=CONFIG_1KB_SWAPS: Perform bank swap after 1KB
This controls the number of bytes per tile that may be used
to store multiple samples
of fragments. If multi-sample
data requires more bytes than this per tile, it is split into
multiple slices.
0=CONFIG_1KB_SPLIT: Split multi-sample tiles over 1KB
1=CONFIG_2KB_SPLIT: Split multi-sample tiles over 2KB
2=CONFIG_4KB_SPLIT: Split multi-sample tiles over 4KB
3=CONFIG_8KB_SPLIT: Split multi-sample tiles over 8KB
This register is a copy of PDMA_TILING_CONFIG and may ONLY be written when the chip is idle,
and MUST be matched by
a write to GB_TILING_CONFIG, PDMA_TILING_CONFIG and all copies of *TILING_CONFIG.
It affects the 2D tiling modes,
so writing to it invalidates all 2D tiled surfaces.
DCP_MULTI_CHIP_CNTL - RW - 32 bits - [GpuF0MMReg:0x6CA4]
Field Name
LOG2_NUM_CHIPS
MULTI_CHIP_TILE_SIZE
Bits
2:0
4:3
Default
0x0
0x0
Description
Log2 of the number of chips in the multi-chip configuration.
Size of the tile per chip within each super-tile.
0=16 x 16 pixel tile per chip.
1=32 x 32 pixel tile per chip.
2=64 x 64 pixel tile per chip.
3=128x128 pixel tile per chip.
Should be programmed with the same value as PA_SC_MULTI_CHIP_CNTL. Controls the Screen Divisioning for Multi-Chip
Configurations
DMIF_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6CB0]
Field Name
DMIF_BUFF_SIZE
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
1:0
Default
0x0
Description
DMIF memory size.
0x0 - full memory size, 384x256bits.
0x1 - 2/3 memory size.
0x2 - 1/3 memory size.
0x3 - reserved
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-251
Display Controller Registers
DMIF_D1_REQ_BURST_SIZE
10:8
0x2
DMIF_D2_REQ_BURST_SIZE
18:16
0x2
DMIF control register
DMIF request burst size for display 1.
0x0 - 1 request.
0x1 - 2 requests.
0x2 - 4 requests.
0x3 - 8 requests.
0x4 - 16 requests.
DMIF request burst size for display 2.
0x0 - 1 request.
0x1 - 2 requests.
0x2 - 4 requests.
0x3 - 8 requests.
0x4 - 16 requests.
DMIF_STATUS - RW - 32 bits - [GpuF0MMReg:0x6CB4]
Field Name
DMIF_MC_SEND_ON_IDLE (R)
Bits
0
Default
0x0
DMIF_CLEAR_MC_SEND_ON_IDLE (W)
1
0x0
DMIF_MC_LATENCY_COUNTER_ENAB
LE
This is a debug register. DMIF status.
8
0x0
Description
This register bit is set to 1 if MH returns data to DMIF when
there is no pending request. It is sticky bit. Once this bit is
set to high, it will stay high until it is cleared by writing 1 to
register DMIF_CLEAR_MH_DATA_ON_IDLE
0=MC does not send data to DMIF when there is no data
request pending
1=MH sends data to DMIF when there is no data pending
request.
This register bit is used to clear register
DMIF_MH_SEND_ON_IDLE
0=No effect
1=Clear register bit DMIF_MH_SEND_ON_IDLE
0=Disable MC latency counter
1=Enable MC latency counter
2.7.28 MCIF Control Registers
MCIF_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6CB8]
Field Name
MCIF_BUFF_SIZE
Bits
1:0
Default
0x0
ADDRESS_TRANSLATION_ENABLE
4
0x0
PRIVILEGED_ACCESS_ENABLE
8
0x0
23:16
0x0
LOW_READ_URG_LEVEL
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-252
Description
MCIF memory size.
0x0 - full memory size, 16x143bits.
0x1 - 3/4 memory size.
0x2 - 1/2 memory size.
0x3 - 1/4 memory size.
Enables address translation for vga, cursor and icon
memory controller requests
0=disable
1=enable
Enables privileged page access for vga, cursor and icon
memory controller requests
0=disable
1=enable
This is the urgency level for vga, cursor, icon and vip reads
when they are all in low priority
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Controller Registers
MC_CLEAN_DEASSERT_LATENCY
29:24
0x10
This is the number of cycles mcif will wait after a write is
transfered to the memory controller and before looking at
the clean signal from the memory controller
MCIF control register
2.7.29
Display Controller to Line Buffer Control Registers
DCP_LB_DATA_GAP_BETWEEN_CHUNK - RW - 32 bits - [GpuF0MMReg:0x6CBC]
Field Name
DCP_LB_GAP_BETWEEN_CHUNK_20B
PP
Bits
3:0
Default
0x5
DCP_LB_GAP_BETWEEN_CHUNK_30B
PP
7:4
0x1
DCP LB chunk gap control
Description
This register is used to control gap between data chunks
sent from DCP to LB when the next LB data chunk is in
20bpp mode. The gap between current chunk and next
chunk will be register value plus 1. The default value is 5. If
any display has 32bpp digital output enabled, this valus
should be set to 6.
This register is used to control gap between data chunks
sent from DCP to LB when the next LB data chunk is in
30bpp mode. The gap between current chunk and next
chunk will be register value plus 1. The default value is 1. If
any display has 32bpp digital output enabled, this valus
should be set to 4
2.7.30 Multi VPU Control Registers
DC_MVP_LB_CONTROL - RW - 32 bits - [GpuF0MMReg:0x65F4]
Field Name
D1_MVP_SWAP_LOCK_IN_MODE
Bits
1:0
Default
0x1
D2_MVP_SWAP_LOCK_IN_MODE
5:4
0x2
DC_MVP_SWAP_LOCK_OUT_SEL
8
0x0
DC_MVP_SWAP_LOCK_OUT_FORCE_
ONE
DC_MVP_SWAP_LOCK_OUT_FORCE_
ZERO
DC_MVP_D1_DFQ_EN
12
0x0
Description
01 - force input to 1, used for master GPU; 10 - use
swap_lock_in, used for slave GPU or middle GPU; 01 is the
default
01 - force input to 1, used for master GPU; 10 - use
swap_lock_in, used for slave GPU or middle GPU; 10 is the
default
0 - use D1 swap out output, 1 - use D2 swap out output;
default is D1 swap out
Force Swap_lock to be one
16
0x0
Force Swap_lock to be zero
18
0x0
DC_MVP_D2_DFQ_EN
19
0x0
DC_MVP_D1_SWAP_LOCK_STATUS
(R)
DC_MVP_D2_SWAP_LOCK_STATUS
(R)
DC_MVP_SWAP_LOCK_IN_CAP (R)
DC_MVP_SPARE_FLOPS (R)
DC MVP LB control register
20
0x0
Enable DFQ in multi-GPU mode to select update_pending
from DFQ engine
Enable DFQ in multi-GPU mode to select update_pending
from DFQ engine
D1 swap_lock status
24
0x0
D2 swap_lock status
28
31
0x0
0x0
Capture swap_lock_in, used in diagnostic mode
USED for keeping spare flops (ECO)
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-253
CRTC Control Registers
2.8
CRTC Control Registers
DC_CRTC_MASTER_EN - RW - 32 bits - [GpuF0MMReg:0x60F8]
Field Name
D1CRTC_MASTER_EN
Bits
0
Default
0x0
Description
Mirror of D1CRTC_MASTER_EN field in
D1CRTC_CONTROL register
1
0x0
Mirror of D2CRTC_MASTER_EN field in
D1CRTC_CONTROL register
(mirror of
D1CRTC_CONTROL:D1CRTC_MASTER_EN)
D2CRTC_MASTER_EN
(mirror of
D2CRTC_CONTROL:D2CRTC_MASTER_EN)
Contains mirror of DxCRTC_MASTER_EN register field in DxCRTC_CONTROL registers
DC_CRTC_TV_CONTROL - RW - 32 bits - [GpuF0MMReg:0x60FC]
Field Name
CRTC_TV_DATA_SOURCE
Bits
0
Default
0x0
Controls source of pixel data and control signals to TV encoder
2.8.1
Description
Determines source of pixel data and control signals to TV
encoder
0 = CRTC1
1 = CRTC2
Primary Display CRTC Control Registers
D1CRTC_H_TOTAL - RW - 32 bits - [GpuF0MMReg:0x6000]
Field Name
D1CRTC_H_TOTAL
Bits
12:0
Default
0x0
Defines horizontal dimension of the display timing for CRTC1
Description
Horizontal total minus one. Sum of display width, overscan
left and right, front and back porch and H sync width.
E.g. for 800 pixels set to 799 = 0x31F
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
D1CRTC_H_BLANK_START_END - RW - 32 bits - [GpuF0MMReg:0x6004]
Field Name
D1CRTC_H_BLANK_START
Bits
12:0
Default
0x0
D1CRTC_H_BLANK_END
28:16
0x0
Description
Start of the horizontal blank. The location of the first pixel of
horizontal blank, relative to pixel zero. If right overscan
border, then blank starts after border ends.
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
End of the horizontal blank. The location of the next pixel
after the last pixel of horizontal blank, relative to pixel zero.
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
Defines horizontal blank region of the display timing for CRTC1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-254
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D1CRTC_H_SYNC_A - RW - 32 bits - [GpuF0MMReg:0x6008]
Field Name
D1CRTC_H_SYNC_A_START
Bits
12:0
Default
0x0
D1CRTC_H_SYNC_A_END
28:16
0x0
Defines horizontal sync A position for CRTC1
Description
First pixel of horizontal sync A.
In normal cases, it is set to 0. It is only set to non-zero
value when we want to test the higher bits of the H counter.
This register should be ignored and set to 0x0 in VGA
timing mode. Hardware does not support odd number
value for this register.
Horizontal sync A end. Determines position of the next
pixel after last pixel of horizontal sync A. The last pixel of
horizontal sync A is D1CRTC_H_SYNC_A_END - 1. The
first pixel of horizontal sync A is pixel 0. It should be
programmed to a value one greater than the actual last
pixel of horizontal sync A.
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
D1CRTC_H_SYNC_A_CNTL - RW - 32 bits - [GpuF0MMReg:0x600C]
Field Name
D1CRTC_H_SYNC_A_POL
Bits
0
Default
0x0
D1CRTC_COMP_SYNC_A_EN
16
0x0
D1CRTC_H_SYNC_A_CUTOFF
17
0x0
Description
Polarity of H SYNC A
0 = active high
1 = active low
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
Enables composite H sync A
0 = disabled
1 = enabled
Cutoff H sync A at end of H BLANK when end of H sync A is
beyond H BLANK
0 = cutoff is enabled
1 = cutoff is disabled
Controls the H SYNC A for CRTC1
D1CRTC_H_SYNC_B - RW - 32 bits - [GpuF0MMReg:0x6010]
Field Name
D1CRTC_H_SYNC_B_START
D1CRTC_H_SYNC_B_END
Bits
12:0
28:16
Defines the position of horizontal sync B for CRTC1
© 2007 Advanced Micro Devices, Inc.
Proprietary
Default
0x0
0x0
Description
First pixel of horizontal sync B
Horizontal sync B end. Determines position of the next
pixel after last pixel of horizontal sync B. The last pixel of
horizontal sync B is D1CRTC_H_SYNC_B_END - 1. This
register value is exclusive. It should be programmed to a
value one greater than the actual last pixel of horizontal
sync B
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-255
CRTC Control Registers
D1CRTC_H_SYNC_B_CNTL - RW - 32 bits - [GpuF0MMReg:0x6014]
Field Name
D1CRTC_H_SYNC_B_POL
Bits
0
Default
0x0
D1CRTC_COMP_SYNC_B_EN
16
0x0
D1CRTC_H_SYNC_B_CUTOFF
17
0x0
Controls horizontal sync B for CRTC1
Field Name
D1CRTC_V_TOTAL
Description
Polarity of H SYNC B
0 = active high
1 = active low
Enables composite H SYNC B
0 = disabled
1 = enabled
Cutoff horizontal sync B at end of horizontal blank region
when end of H SYNC B is beyond horizontal blank
0 = cutoff is enabled
1 = cutoff is disabled
D1CRTC_V_TOTAL - RW - 32 bits - [GpuF0MMReg:0x6020]
Bits
12:0
Default
0x0
Defines the vertical dimension of display timing for CRTC1
Description
Vertical total minus one. Sum of vertical active display, top
and bottom overscan, front and back porch and vertical
sync width.
E.g. for 525 lines set to 524 = 0x20C
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
D1CRTC_V_BLANK_START_END - RW - 32 bits - [GpuF0MMReg:0x6024]
Field Name
D1CRTC_V_BLANK_START
Bits
12:0
Default
0x0
D1CRTC_V_BLANK_END
28:16
0x0
Defines the vertical blank region of the display timing for CRTC1
Description
Vertical blank start. Determines the position of the first
blank line in a frame. Line 0 is the first line of vertical sync
A.
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
Vertical blank end. Determines the position of the next line
after the last line of vertical blank. The last line of vertical
blank is D1CRTC_V_BLANK_END - 1.
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
D1CRTC_V_SYNC_A - RW - 32 bits - [GpuF0MMReg:0x6028]
Field Name
D1CRTC_V_SYNC_A_START
Bits
12:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-256
Description
The first line of vertical sync A. In normal cases, it is set to
0. It is set to non-zero value only when trying to test the
higher bits of the vertical counter
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D1CRTC_V_SYNC_A_END
28:16
0x0
Vertical sync A end. Determines the position of the next
line after the last line of vertical sync A. The last line of
vertical sync A is D1CRTC_V_SYNC_A_END - 1. The first
line of vertical sync A is line 0. This register value is
exclusive. It should be programmed to a value one greater
than the actual last line of vertical sync A
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
Defines the position of vertical sync A for CRTC1
D1CRTC_V_SYNC_A_CNTL - RW - 32 bits - [GpuF0MMReg:0x602C]
Field Name
D1CRTC_V_SYNC_A_POL
Bits
0
Default
0x0
Controls V SYNC A for CRTC1
Description
Polarity of V SYNC A
0 = active high
1 = active low
Double-buffered with
D1MODE_MASTER_UPDATE_LOCK
D1CRTC_V_SYNC_B - RW - 32 bits - [GpuF0MMReg:0x6030]
Field Name
D1CRTC_V_SYNC_B_START
Bits
12:0
Default
0x0
D1CRTC_V_SYNC_B_END
28:16
0x0
Description
Vertical sync B start. Determines the position of the first
line of vertical sync B.
Vertical sync B end. Determines the position of the next
line after the last line of vertical sync B. Last line of vertical
sync B is D1CRTC_V_SYNC_B_END - 1. This register
value is exclusive. It should be programmed to a value one
greater than the actual last line of vertical sync B
Defines the position of vertical sync B for CRTC1
D1CRTC_V_SYNC_B_CNTL - RW - 32 bits - [GpuF0MMReg:0x6034]
Field Name
D1CRTC_V_SYNC_B_POL
Bits
0
Default
0x0
Description
Controls polarity of vertical sync B
0 = active high
1 = active low
Controls vertical sync B for CRTC1
D1CRTC_TRIGA_CNTL - RW - 32 bits - [GpuF0MMReg:0x6060]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-257
CRTC Control Registers
D1CRTC_TRIGA_SOURCE_SELECT
3:0
0x0
D1CRTC_TRIGA_POLARITY_SELECT
6:4
0x0
D1CRTC_TRIGA_RESYNC_BYPASS_E
N
8
0x0
D1CRTC_TRIGA_INPUT_STATUS (R)
9
0x0
D1CRTC_TRIGA_POLARITY_STATUS
(R)
D1CRTC_TRIGA_OCCURRED (R)
10
0x0
11
0x0
D1CRTC_TRIGA_RISING_EDGE_DETE
CT_CNTL
13:12
0x0
D1CRTC_TRIGA_FALLING_EDGE_DET
ECT_CNTL
17:16
0x0
D1CRTC_TRIGA_FREQUENCY_SELEC
T
21:20
0x0
D1CRTC_TRIGA_DELAY
28:24
0x0
31
0x0
D1CRTC_TRIGA_CLEAR (W)
Controls for external trigger A signal in CRTC1
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-258
Select source of input signals for external trigger A
0 = logic 0
1 = VSYNCA from another CRTC of the chip
2 = HSYNCA from another CRTC of the chip
3 = VSYNCB from another CRTC of the chip
4 = HSYNCB from another CRTC of the chip
5 = GENERICA pin
6 = GENERICB pin
7 = VSYNCA pin
8 = HSYNCA pin
9 = VSYNCB pin
10 = HSYNCB pin
11 = HPD1 pin
12 = HPD2 pin
13 = DVALID pin
14 = PSYNC pin
15 = Video capture complete signal from VIP
Selects source of input signal from polarity of external
trigger A
0 = logic 0
1 = interlace polarity from another CRTC of the chip
2 = GENERICA pin
3 = GENERICB pin
4 = HSYNCA pin
5 = HSYNCB pin
6 = video capture polarity input from VIP
7 = DVALID pin
Bypass the resync logic for the external trigger A signal and
its polarity input signal
0 = do not bypass
1 = bypass the resync logic
Read back the value of the external trigger A input signal
after the mux
Reports the value of the external trigger A polarity signal
after the mux
Reports whether external trigger A has occurred. A sticky
bit.
0 = has not occurred
1 = has occurred
Controls the detection of rising edge of the external trigger
A signal
00 = do not detect rising edge
01 = always detect rising edge
10 = detect rising edge only when field polarity is low
11 = detect rising edge only when field polarity is high
Controls the detection of falling edge of external trigger A
signal
00 = do not detect falling edge
01 = always detect falling edge
10 = detect falling edge only when field polarity is low
11 = detect falling edge only when field polarity is high
Determines the frequency of the external trigger A signal
00 = send every signal
01 = send every 2 signals
10 = reserved
11 = send every 4 signals
A programmable PCLK_CRTC1 delay to send external
trigger A signal.
Clears the sticky bit D1CRTC_TRIGA_OCCURRED when
written with '1'
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D1CRTC_TRIGA_MANUAL_TRIG - RW - 32 bits - [GpuF0MMReg:0x6064]
Field Name
D1CRTC_TRIGA_MANUAL_TRIG (W)
Bits
0
Default
0x0
Manual trigger for external trigger A signal of CRTC1
Description
One shot trigger for external trigger A signal when written
with '1'
D1CRTC_TRIGB_CNTL - RW - 32 bits - [GpuF0MMReg:0x6068]
Field Name
D1CRTC_TRIGB_SOURCE_SELECT
Bits
3:0
Default
0x0
D1CRTC_TRIGB_POLARITY_SELECT
6:4
0x0
D1CRTC_TRIGB_RESYNC_BYPASS_E
N
8
0x0
D1CRTC_TRIGB_INPUT_STATUS (R)
9
0x0
D1CRTC_TRIGB_POLARITY_STATUS
(R)
D1CRTC_TRIGB_OCCURRED (R)
10
0x0
11
0x0
13:12
0x0
D1CRTC_TRIGB_RISING_EDGE_DETE
CT_CNTL
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Select source of input signals for external trigger B
0 = logic 0
1 = VSYNCA from another CRTC of the chip
2 = HSYNCA from another CRTC of the chip
3 = VSYNCB from another CRTC of the chip
4 = HSYNCB from another CR TC of the chip
5 = GENERICA pin
6 = GENERICB pin
7 = VSYNCA pin
8 = HSYNCA pin
9 = VSYNCB pin
10 = HSYNCB pin
11 = HPD1 pin
12 = HPD2 pin
13 = DVALID pin
14 = PSYNC pin
15 = Video capture complete signal from VIP
Selects source of input signal from polarity of external
trigger A
0 = logic 0
1 = interlace polarity from another CRTC of the chip
2 = GENERICA pin
3 = GENERICB pin
4 = HSYNCA pin
5 = HSYNCB pin
6 = video capture polarity input from VIP
7 = DVALID pin
Bypass the resync logic for the external trigger A signal and
its polarity input signal
0 = do not bypass
1 = bypass the resync logic
Read back the value of the external trigger B input signal
after the mux
Reports the value of the external trigger B polarity signal
after the mux
Reports whether external trigger B has occurred. A sticky
bit.
0 = has not occurred
1 = has occurred
Controls the detection of rising edge of the external trigger
B signal
00 = do not detect rising edge
01 = always detect rising edge
10 = detect rising edge only when field polarity is low
11 = detect rising edge only when field polarity is high
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-259
CRTC Control Registers
D1CRTC_TRIGB_FALLING_EDGE_DET
ECT_CNTL
17:16
0x0
D1CRTC_TRIGB_FREQUENCY_SELEC
T
21:20
0x0
D1CRTC_TRIGB_DELAY
D1CRTC_TRIGB_CLEAR (W)
28:24
31
0x0
0x0
Controls the detection of falling edge of external trigger B
signal
00 = do not detect falling edge
01 = always detect falling edge
10 = detect falling edge only when field polarity is low
11 = detect falling edge only when field polarity is high
Determines the frequency of the external trigger B signal
00 = send every signal
01 = send every 2 signals
10 = reserved
11 = send every 4 signals
A programmable delay to send external trigger B signal
Clears the sticky bit D1CRTC_TRIGB_OCCURRED when
written with '1'
Control for external trigger B signal of CRTC1
D1CRTC_TRIGB_MANUAL_TRIG - RW - 32 bits - [GpuF0MMReg:0x606C]
Field Name
D1CRTC_TRIGB_MANUAL_TRIG (W)
Bits
0
Default
0x0
Manual trigger for external trigger B signal for CRTC1
Description
One shot trigger for external trigger B signal when written
with '1'
D1CRTC_FORCE_COUNT_NOW_CNTL - RW - 32 bits - [GpuF0MMReg:0x6070]
Field Name
D1CRTC_FORCE_COUNT_NOW_MODE
Bits
1:0
Default
0x0
D1CRTC_FORCE_COUNT_NOW_TRIG_
SEL
8
0x0
D1CRTC_FORCE_COUNT_NOW_OCCU
RRED (R)
16
0x0
D1CRTC_FORCE_COUNT_NOW_CLEA
R (W)
Controls CRTC1 force count now logic
24
0x0
Description
Controls which timing counter is forced
0 = force counter now mode is disabled
1 = force H count now to H_TOTAL only
2 = force H count to H_TOTAL and V count to V_TOTAL in
progressive mode and V_TOTAL-1 in interlaced mode
3 = reserved
Selects the trigger signal as force count now trigger
0 = selects CRTC_TRIG_A and CRTC_TRIG_A_POL
1 = selects CRTC_TRIG_B and CRTC_TRIG_B_POL
Reports the status of force count now, a sticky bit.
0 = CRTC force count now has not occurred
1 = CRTC force count now has occurred
Resets D1CRTC_FORCE_COUNT_NOW_OCCURRED
when written with '1'
D1CRTC_FLOW_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6074]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-260
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D1CRTC_FLOW_CONTROL_SOURCE_
SELECT
4:0
0x0
D1CRTC_FLOW_CONTROL_POLARITY
8
0x0
D1CRTC_FLOW_CONTROL_GRANULA
RITY
16
0x0
D1CRTC_FLOW_CONTROL_INPUT_ST
ATUS (R)
24
0x0
Controls flow control of CRTC1
Selects the signal used for flow control in CRTC1
0 = logic 0
1 = GENERICA pin
2 = GENERICB pin
3 = HPD1 pin
4 = HPD2 pin
5 = DDC1DATA pin
6 = DDC1CLK pin
7 = DDC2DATA pin
8 = DDC2CLK pin
9 = DVOCLK pin
10 = VHAD(0] pin
11 = VHAD[1] pin
12 = VPHCTL pin
13 = VIPCLK pin
14 = DVALID pin
15 = PSYNC pin
16 = a GPIO pin for dual-GPU, TBD
Controls the polarity of the flow control input signal
0 = keep the signal the same polarity
1 = invert the polartiy of the input signal
Controls at which pixel position flow control can start to
happen
0 = flow control only start to happen on odd-even pixel
boundary
1 = flow control can start at any pixel position
Reports the value of the flow control input signal
0 = output of source mux of flow control signal is low
1 = output of source mux of flow control signal is high
D1CRTC_PIXEL_DATA_READBACK - RW - 32 bits - [GpuF0MMReg:0x6078]
Field Name
Bits
Default
Description
D1CRTC_PIXEL_DATA_BLUE_CB (R)
9:0
0x0
B/Cb component sent to DISPOUT
D1CRTC_PIXEL_DATA_GREEN_Y (R)
19:10
0x0
G/Y component sent to DISPOUT
D1CRTC_PIXEL_DATA_RED_CR (R)
29:20
0x0
R/Cr component sent to DISPOUT
Read back of the CRTC1 pixel data sent to DISPOUT. This is a debug register. Intended for use in one shot clocking mode.
D1CRTC_STEREO_FORCE_NEXT_EYE - RW - 32 bits - [GpuF0MMReg:0x607C]
Field Name
D1CRTC_STEREO_FORCE_NEXT_EYE
(W)
Bits
1:0
Default
0x0
Description
Force next frame eye view - One shot.
00: No force - next eye opposite of current eye
01: Right eye force - force right eye next field/frame
10: Left eye force - force right eye next field/frame
11: Reserved
After a force has occured, readback of this register will be
00
Force Next Eye register
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-261
CRTC Control Registers
D1CRTC_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6080]
Field Name
D1CRTC_MASTER_EN
Bits
0
Default
0x0
D1CRTC_SYNC_RESET_SEL
D1CRTC_DISABLE_POINT_CNTL
4
9:8
0x1
0x1
D1CRTC_CURRENT_MASTER_EN_STA
TE (R)
16
0x0
D1CRTC_DISP_READ_REQUEST_DISA
BLE
24
0x0
D1CRTC_PREFETCH_EN
28
0x0
D1CRTC_SOF_PULL_EN
29
0x0
Controls CRTC1 timing generator and data read request to display1
Description
Enables/Disables CRTC1. H counter is at H_TOTAL and V
counter is at first line of blank when CRTC is disabled.
0 = Disabled
1 = Enabled
Allows power management to lower CRTC1 enable.
When D1CRTC_MASTER_EN is set to 0, delay the
disabling of CRTC1 until certain point within the frame
00 = disable CRTC immediately
01 = delay disable CRTC until the end of the current line
10 = reserved
11 = delay disable CRTC until end of the first line in the
vertical blank region
Read-only field indicates the current status of the timing
generator. Can be used to poll for when a delayed disable
takes effect.
0 = CRTC is disabled
1 = CRTC is enabled
Disables data read request from the display controller. Can
be used to stop display reads from system memory but
keep display timing generation running. Has no effect if
CRTC is disabled.
0 = do not disable data read request
1 = disable data read request
Double bufferred. Enable data prefetch for display 1
0 = do not enable prefetch
1 = enable data prefetch
At SOF, LB level can be set a a programmable value
(D1MODE_SOF_READ_PT), which is the point LB can
make requests to. Between SOF to active line, CRTC
needs to pull scaler/LB so that LB can make data requests
beyond that programmable point.
0 = do not enable pulling
1 = enable pulling
D1CRTC_BLANK_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6084]
Field Name
D1CRTC_CURRENT_BLANK_STATE (R)
D1CRTC_BLANK_DATA_EN
Bits
0
8
Default
0x0
0x0
Description
Read only status indicating current state of display
blanking.
0 = screen not blanked
1 = screen is blanked
Enable for blanking active display area. The active area of
display that is forced will use the
D1CRTC_BLACK_COLOR value.
This field is optionally double buffered with
D1CRTC_BLANK_DATA_DOUBLE_BUFFER_EN.
0 = disable blanking
1 = enable blanking
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-262
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D1CRTC_BLANK_DE_MODE
16
0x0
Determines whether BLANK and DATA_ACTIVE signal
keeps toggling when screen is blank
0 = toggles BLANK and DATA_ACTIVE
1 = keep BLANK active and DATA_ACTIVE inactive
Controls forced blanking of active area of display timing. Useful for display mode switches when corrupted image may be
generated for a frame or two.
D1CRTC_INTERLACE_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6088]
Field Name
D1CRTC_INTERLACE_ENABLE
D1CRTC_INTERLACE_FORCE_NEXT_F
IELD (W)
Bits
0
Default
0x0
17:16
0x0
Description
Enables interlaced timing
0 = Progressive timing
1 = Interlaced timing
One shot force next field polarity when written
00 = does not force next field
01 = force only next field to odd
10 = force only next field to even
11 = does not force next field
Interlaced timing control for CRTC1
D1CRTC_INTERLACE_STATUS - RW - 32 bits - [GpuF0MMReg:0x608C]
Field Name
D1CRTC_INTERLACE_CURRENT_FIEL
D (R)
Bits
0
Default
0x0
Description
Reports the polarity of current field
0 = even
1 = odd
D1CRTC_INTERLACE_NEXT_FIELD (R)
1
0x0
Reports the polarity of the next field. Normally the opposite
of the current field. When
D1CRTC_INTERLACE_FORCE_NEXT_FIELD is used to
force polarity of next field, then next field can match current
field.
0 = even
1 = odd
Read-only register reports the polarity of the current and next field for interlaced timing
D1CRTC_BLANK_DATA_COLOR - RW - 32 bits - [GpuF0MMReg:0x6090]
Field Name
D1CRTC_BLANK_DATA_COLOR_BLUE
_CB
D1CRTC_BLANK_DATA_COLOR_GREE
N_Y
D1CRTC_BLANK_DATA_COLOR_RED_
CR
Set the color for pixels in blank region
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
9:0
Default
0x0
B / Cb component
Description
19:10
0x0
G / Y component
29:20
0x0
R / Cr component
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-263
CRTC Control Registers
D1CRTC_OVERSCAN_COLOR - RW - 32 bits - [GpuF0MMReg:0x6094]
Field Name
Bits
D1CRTC_OVERSCAN_COLOR_BLUE
9:0
D1CRTC_OVERSCAN_COLOR_GREEN
19:10
D1CRTC_OVERSCAN_COLOR_RED
29:20
Defines color of the overscan region for CRTC1
Default
0x0
0x0
0x0
B or Cb component
G or Y component
R or Cr component
Description
D1CRTC_BLACK_COLOR - RW - 32 bits - [GpuF0MMReg:0x6098]
Field Name
Bits
Default
Description
D1CRTC_BLACK_COLOR_B_CB
9:0
0x0
B / Cb component of the black color
D1CRTC_BLACK_COLOR_G_Y
19:10
0x0
G / Y component of the black color
D1CRTC_BLACK_COLOR_R_CR
29:20
0x0
R / Cr component of the black color
Black color applied to the active display region when blanking the screen
D1CRTC_STATUS - RW - 32 bits - [GpuF0MMReg:0x609C]
Field Name
D1CRTC_V_BLANK (R)
Bits
0
Default
0x0
D1CRTC_V_ACTIVE_DISP (R)
1
0x0
D1CRTC_V_SYNC_A (R)
2
0x0
D1CRTC_V_UPDATE (R)
3
0x0
D1CRTC_V_START_LINE (R)
4
0x0
D1CRTC_H_BLANK (R)
16
0x0
D1CRTC_H_ACTIVE_DISP (R)
17
0x0
D1CRTC_H_SYNC_A (R)
18
0x0
Reports the position of CRTC1
Description
Current vertical position
0 = outside vertical blank region
1 = within vertical blank region
Current vertical position
0 = outside vertical active display region
1 = within vertical active display region
Current vertical position
0 = outside VSYNC
1 = within VSYNC
Current vertical position
0 = outside the V_UPDATE region
1 = within the V_UPDATE region (between end of vertical
active display and start_line)
Current vertical position
0 = outside start_line region
1 = within start_line region
Current horizontal position
0 = outside horizontal blank region
1 = within horizontal blank region
Current horizontal region
0 = outside horizontal active display region
1 = within horizontal active display region
Current horizontal position
0 = outside horizontal sync
1 = within horizontal sync
D1CRTC_STATUS_POSITION - RW - 32 bits - [GpuF0MMReg:0x60A0]
Field Name
Bits
D1CRTC_VERT_COUNT (R)
12:0
D1CRTC_HORZ_COUNT (R)
28:16
Current horizontal and vertical count of CRTC1
Default
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-264
Description
Reports current vertical count
Reports current horizontal count
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D1CRTC_STATUS_FRAME_COUNT - RW - 32 bits - [GpuF0MMReg:0x60A4]
Field Name
D1CRTC_FRAME_COUNT (R)
Current frame count for CRTC1
Bits
23:0
Default
0x0
Description
Reports current frame count
D1CRTC_STATUS_VF_COUNT - RW - 32 bits - [GpuF0MMReg:0x60A8]
Field Name
Bits
Default
D1CRTC_VF_COUNT (R)
28:0
0x0
Current composite vertical and frame count for CRTC1
Description
Reports current vertical and frame count
D1CRTC_STATUS_HV_COUNT - RW - 32 bits - [GpuF0MMReg:0x60AC]
Field Name
D1CRTC_HV_COUNT (R)
Current composite H/V count of CRTC1
Bits
28:0
Default
0x0
Description
Reports current horizontal and vertical count
D1CRTC_COUNT_RESET - RW - 32 bits - [GpuF0MMReg:0x60B0]
Field Name
D1CRTC_RESET_FRAME_COUNT (W)
Bits
0
Default
0x0
Description
One-shot reset of frame counter of CRTC1 when written
with '1'
Resets CRTC1 counters
D1CRTC_COUNT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x60B4]
Field Name
D1CRTC_HORZ_COUNT_BY2_EN
Bits
0
Default
0x0
Description
Set to 1 for DVI 30bpp mode only, set to 0 otherwise
D1CRTC_HORZ_REPETITION_COUNT
4:1
0x0
Enable horizontal repetition. CRTC increments the H
counter every (COUNT+1) pixel clocks
0 = every clock
1 = every 2 clocks
2 = every 3 clocks
etc
Controls the counters in CRTC1
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-265
CRTC Control Registers
D1CRTC_MANUAL_FORCE_VSYNC_NEXT_LINE - RW - 32 bits - [GpuF0MMReg:0x60B8]
Field Name
D1CRTC_MANUAL_FORCE_VSYNC_NE
XT_LINE (W)
Manual force of VSYNC to happen next line
Bits
0
Default
0x0
Description
One shot force VSYNCA to happen next line when written
with '1'
D1CRTC_VERT_SYNC_CONTROL - RW - 32 bits - [GpuF0MMReg:0x60BC]
Field Name
D1CRTC_FORCE_VSYNC_NEXT_LINE_
OCCURRED (R)
Bits
0
Default
0x0
D1CRTC_FORCE_VSYNC_NEXT_LINE_
CLEAR (W)
8
0x0
D1CRTC_AUTO_FORCE_VSYNC_MOD
E
17:16
0x0
Controls the feature to force VSYNC next line for CRTC1
Description
Reports whether force vsync next line event has occurred.
Sticky bit.
0 = event has not occurred
1 = event has occurred
One shot clear to the sticky bit
D1CRTC_FORCE_VSYNC_NEXT_LINE_OCCURRED
when written with '1'
Selection of auto mode for forcing vsync next line
00 = disables auto mode
01 = force VSYNC next line on CRTC trigger A signal
10 = force VSYNC next line on CRTC trigger B signal
11 = reserved
D1CRTC_STEREO_STATUS - RW - 32 bits - [GpuF0MMReg:0x60C0]
Field Name
D1CRTC_STEREO_CURRENT_EYE (R)
Bits
0
Default
0x0
D1CRTC_STEREO_SYNC_OUTPUT (R)
8
0x0
D1CRTC_STEREO_SYNC_SELECT (R)
16
0x0
D1CRTC_STEREO_FORCE_NEXT_EYE
_PENDING (R)
25:24
0x0
Reports CRTC1 status in stereoscopic display
Description
Reports the polarity of the current frame/field
0 = right eye image
1 = left eye image
Reports current value of STEREOSYNC signal
(STEREOSYNC sent to the DISPOUT block)
Reports current value of SYNC_SELECT signal
(SYNC_SELECT sent to the SCL block)
Reports the status of
D1CRTC_STEREO_FORCE_NEXT_EYE write.
00: No force pending
01: Right force pending
10: Left force pending
11: Reserved
D1CRTC_STEREO_CONTROL - RW - 32 bits - [GpuF0MMReg:0x60C4]
Field Name
D1CRTC_STEREO_SYNC_OUTPUT_PO
LARITY
Bits
8
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-266
Description
Controls polarity of the stereosync signal
0 = 0 means right eye image and 1 means left eye image
1 = 0 means left eye image and 1 means right eye image
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D1CRTC_STEREO_SYNC_SELECT_PO
LARITY
16
0x0
D1CRTC_STEREO_EN
24
0x0
Stereosync control for CRTC1
Controls polarity of STEREO_SELECT signal sent to scaler
0 = 0 means right eye image and 1 means left eye image
1 = 0 means left eye image and 1 means right eye image
Enables toggling of STEREOSYNC and STEREO_SELECT
signals
0 = disable toggling.
1 = enable toggling at every frame (progressive) or every
field (interlace) at leading edge of VSYNCA
D1CRTC_SNAPSHOT_STATUS - RW - 32 bits - [GpuF0MMReg:0x60C8]
Field Name
D1CRTC_SNAPSHOT_OCCURRED (R)
Bits
0
Default
0x0
D1CRTC_SNAPSHOT_CLEAR (W)
1
0x0
D1CRTC_SNAPSHOT_MANUAL_TRIGG
ER (W)
Controls CRTC1 snapshot
2
0x0
Description
Reports status of snapshot. A sticky bit to be cleared by
writing 1 to D1CRTC_SNAPSHOT_CLEAR
0 = snapshot has not occurred
1 = snapshot has occurred
Clears the D1CRTC_SNAPSHOT_OCCURRED sticky bit
when written with '1'
One shot trigger to perform snapshot when written with '1'
D1CRTC_SNAPSHOT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x60CC]
Field Name
D1CRTC_AUTO_SNAPSHOT_TRIG_SE
L
Bits
1:0
Default
0x0
Controls snapshot mode for CRTC1
Description
Determines signal source for auto-snapshot
00 = auto-snapshot is disabled
01 = uses CRTC trigger A as trigger event in auto-snapshot
mode
10 = uses CRTC trigger B as trigger event in auto-snapshot
mode
11 = reserved
D1CRTC_SNAPSHOT_POSITION - RW - 32 bits - [GpuF0MMReg:0x60D0]
Field Name
D1CRTC_SNAPSHOT_VERT_COUNT
(R)
D1CRTC_SNAPSHOT_HORZ_COUNT
(R)
Snapshot H and V count for CRTC1
Bits
12:0
Default
0x0
28:16
0x0
Description
Reads back the snapshoted vertical count
Reads back the snapshoted horizontal count
D1CRTC_SNAPSHOT_FRAME - RW - 32 bits - [GpuF0MMReg:0x60D4]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-267
CRTC Control Registers
D1CRTC_SNAPSHOT_FRAME_COUNT
(R)
Snapshot frame count of CRTC1
23:0
0x0
Reports the snapshoted frame count
D1CRTC_START_LINE_CONTROL - RW - 32 bits - [GpuF0MMReg:0x60D8]
Field Name
Bits
D1CRTC_PROGRESSIVE_START_LINE
0
_EARLY
D1CRTC_INTERLACE_START_LINE_EA
8
RLY
move start_line signal earlier by 1 line in CRTC1
Default
0x0
0x1
Description
move start_line signal by 1 line eariler in progressive mode
move start_line signal by 1 line earlier in interlaced timing
mode
D1CRTC_INTERRUPT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x60DC]
Field Name
D1CRTC_SNAPSHOT_INT_MSK
Bits
0
Default
0x0
D1CRTC_SNAPSHOT_INT_TYPE
D1CRTC_V_UPDATE_INT_MSK
1
4
0x0
0x0
D1CRTC_V_UPDATE_INT_TYPE
D1CRTC_FORCE_COUNT_NOW_INT_M
SK
5
8
0x0
0x0
D1CRTC_FORCE_COUNT_NOW_INT_T
YPE
D1CRTC_FORCE_VSYNC_NEXT_LINE_
INT_MSK
9
0x0
16
0x0
D1CRTC_FORCE_VSYNC_NEXT_LINE_
INT_TYPE
D1CRTC_TRIGA_INT_MSK
17
0x0
24
0x0
D1CRTC_TRIGB_INT_MSK
25
0x0
D1CRTC_TRIGA_INT_TYPE
D1CRTC_TRIGB_INT_TYPE
Interrupt mask for CRTC1 events
26
27
0x0
0x0
Description
Interrupt mask for CRTC snapshot event
0 = disables interrupt
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
Interrupt mask for falling edge of V_UPDATE ^M
0 = disables interrupt^M
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
Interrupt mask for force count now event
0 = disables interrupt
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
Interrupt mask for force VSYNC next line event
0 = disables interrupt
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
Interrupt mask for CRTC external trigger A
0 = disables interrupt
1 = enables interrupt
Interrupt mask for CRTC external trigger B
0 = disables interrupt
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
D1MODE_MASTER_UPDATE_LOCK - RW - 32 bits - [GpuF0MMReg:0x60E0]
Field Name
D1MODE_MASTER_UPDATE_LOCK
Bits
0
Default
0x0
Master update lock for CRTC1 V_UPDATE signal
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-268
Description
Set the master update lock for V_UPDATE signal
0 = no master lock, V_UPDATE signal will occur
1 = set master lock to prevent V_UPDATE signal occuring,
thus prevent double buffering of display registers
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D1MODE_MASTER_UPDATE_MODE - RW - 32 bits - [GpuF0MMReg:0x60E4]
Field Name
D1MODE_MASTER_UPDATE_MODE
D1MODE_MASTER_UPDATE_INTERLA
CED_MODE
Bits
2:0
Default
0x0
17:16
0x0
Controls the generation of the V_UPDATE signal in CRTC1
Description
Controls the position of the V_UPDATE signal
000 = V_UPDATE occurs between end of active display
region and start line signal
001 = V_UPDATE occurs at first leading edge of HSYNCA
after leading edge of VSYNCA
010 = V_UPDATE occurs at the leading edge of VSYNC_A
011 = V_UPDATE occurs at the beginning of the first line of
vertical front porch
100 = V_UPDATE occurs at end of the line before start line
Others = Reserved
Controls generation of V_UPDATE signal in interlaced
mode
00 = generates V_UPDATE at both even and odd field
01 = generates V_UPDATE only at even field. when
D1MODE_MASTER_UPDATE_MODE = 00, V_UPDATE
starts at odd field and ends at even field
10 = generates V_UPDATE only at odd field. when
D1MODE_MASTER_UPDATE_MODE = 00, V_UPDATE
starts at even field and ends at odd field
11 = reserved
D1CRTC_UPDATE_LOCK - RW - 32 bits - [GpuF0MMReg:0x60E8]
Field Name
D1CRTC_UPDATE_LOCK
Bits
0
Default
0x0
Description
Set the lock for CRTC timing registers
0 = no lock, double buffering can occur
1 = set lock to prevent double buffering
Update lock for CRTC1 timing registers
D1CRTC_DOUBLE_BUFFER_CONTROL - RW - 32 bits - [GpuF0MMReg:0x60EC]
Field Name
D1CRTC_UPDATE_PENDING (R)
Bits
0
Default
0x0
D1CRTC_UPDATE_INSTANTLY
8
0x0
D1CRTC_BLANK_DATA_DOUBLE_BUF
FER_EN
16
0x0
Controls double buffering of CRTC1 registers
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Reports the status of double-buffered timing registers in
CRTC1
0 = update has completed
1 = update is still pending
Disables double buffering of CRTC1 timing registers
0 = enables double buffering
1 = disables double buffering
Enables the double buffering of
D1CRTC_BLANK_DATA_EN
0 = disables double buffering. D1CRTC_BLANK_DATA_EN
is updated immediately
1 = enables double buffering of
D1CRTC_BLANK_DATA_EN when V_UPDATE is active
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-269
CRTC Control Registers
D1CRTC_VGA_PARAMETER_CAPTURE_MODE - RW - 32 bits - [GpuF0MMReg:0x60F0]
Field Name
D1CRTC_VGA_PARAMETER_CAPTUR
E_MODE
Bits
0
Default
0x0
Description
Controls how VGA timing parameters are captured.
0: CRTC1 will continuously latch in timing parameters from
VGA
1: CRTC1 will continuously latch in timing parameters from
VGA except during VGA parameter recalculated window
Controls how VGA timing parameters are captured
2.8.2
Secondary Display CRTC Control Registers
D2CRTC_H_TOTAL - RW - 32 bits - [GpuF0MMReg:0x6800]
Field Name
D2CRTC_H_TOTAL
Bits
12:0
Default
0x0
Description
Horizontal total minus one. Sum of display width, overscan
left and right, front and back porch and H sync width.
E.g. for 800 pixels set to 799 = 0x31F
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
Defines horizontal dimension of the display timing for CRTC2
D2CRTC_H_BLANK_START_END - RW - 32 bits - [GpuF0MMReg:0x6804]
Field Name
D2CRTC_H_BLANK_START
Bits
12:0
Default
0x0
D2CRTC_H_BLANK_END
28:16
0x0
Defines horizontal blank region of the display timing for CRTC2
Description
Start of the horizontal blank. The location of the first pixel of
horizontal blank, relative to pixel zero. If right overscan
border, then blank starts after border ends.
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
End of the horizontal blank. The location of the next pixel
after the last pixel of horizontal blank, relative to pixel zero.
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
D2CRTC_H_SYNC_A - RW - 32 bits - [GpuF0MMReg:0x6808]
Field Name
D2CRTC_H_SYNC_A_START
Bits
12:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-270
Description
First pixel of horizontal sync A.
In normal cases, it is set to 0. It is only set to non-zero
value when we want to test the higher bits of the H counter.
This register should be ignored and set to 0x0 in VGA
timing mode. Hardware does not support odd number
value for this register.
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D2CRTC_H_SYNC_A_END
28:16
0x0
Horizontal sync A end. Determines position of the next
pixel after last pixel of horizontal sync A. The last pixel of
horizontal sync A is D2CRTC_H_SYNC_A_END - 1. The
first pixel of horizontal sync A is pixel 0. It should be
programmed to a value one greater than the actual last
pixel of horizontal sync A.
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
Defines horizontal sync A position for CRTC2
D2CRTC_H_SYNC_A_CNTL - RW - 32 bits - [GpuF0MMReg:0x680C]
Field Name
D2CRTC_H_SYNC_A_POL
Bits
0
Default
0x0
D2CRTC_COMP_SYNC_A_EN
16
0x0
D2CRTC_H_SYNC_A_CUTOFF
17
0x0
Description
Polarity of H SYNC A
0 = active high
1 = active low
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
Enables composite H sync A
0 = disabled
1 = enabled
Cutoff H sync A at end of H BLANK when end of H sync A is
beyond H BLANK
0 = cutoff is enabled
1 = cutoff is disabled
Controls the H SYNC A for CRTC1
D2CRTC_H_SYNC_B - RW - 32 bits - [GpuF0MMReg:0x6810]
Field Name
D2CRTC_H_SYNC_B_START
D2CRTC_H_SYNC_B_END
Bits
12:0
28:16
Default
0x0
0x0
Defines the position of horizontal sync B for CRTC2
Description
First pixel of horizontal sync B
Horizontal sync B end. Determines position of the next
pixel after last pixel of horizontal sync B. The last pixel of
horizontal sync B is D2CRTC_H_SYNC_B_END - 1. This
register value is exclusive. It should be programmed to a
value one greater than the actual last pixel of horizontal
sync B
D2CRTC_H_SYNC_B_CNTL - RW - 32 bits - [GpuF0MMReg:0x6814]
Field Name
D2CRTC_H_SYNC_B_POL
D2CRTC_COMP_SYNC_B_EN
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
16
0x0
Description
Polarity of H SYNC B
0 = active high
1 = active low
Enables composite H SYNC B
0 = disabled
1 = enabled
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-271
CRTC Control Registers
D2CRTC_H_SYNC_B_CUTOFF
17
0x0
Cutoff horizontal sync B at end of horizontal blank region
when end of H SYNC B is beyond horizontal blank
0 = cutoff is enabled
1 = cutoff is disabled
Controls horizontal sync B for CRTC2
D2CRTC_VBI_END - RW - 32 bits - [GpuF0MMReg:0x6818]
Field Name
D2CRTC_VBI_V_END
Bits
12:0
Default
0x3
Description
VBI drops when this number of complete horizontal line
remains before the start of v active and
D2CRTC_VBI_H_END reached
D2CRTC_VBI_H_END
28:16
0x0
VBI drops when this number of H pixel remains before the
start of v active and D2CRTC_VBI_V_END reached
VBI goes to CG to tell CG when crtc is in non v active region (i.e. is asserted during VBLANK region + vertical overscan) and is
safe to change mclk, VBI can be programmed to be de-asserted earlier than start of v active to prevent CG from changing mclk
close to the start v active
D2CRTC_V_TOTAL - RW - 32 bits - [GpuF0MMReg:0x6820]
Field Name
D2CRTC_V_TOTAL
Bits
12:0
Default
0x0
Description
Vertical total minus one. Sum of vertical active display, top
and bottom overscan, front and back porch and vertical
sync width.
E.g. for 525 lines set to 524 = 0x20C
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
Defines the vertical dimension of display timing for CRTC2
D2CRTC_V_BLANK_START_END - RW - 32 bits - [GpuF0MMReg:0x6824]
Field Name
D2CRTC_V_BLANK_START
Bits
12:0
Default
0x0
D2CRTC_V_BLANK_END
28:16
0x0
Description
Vertical blank start. Determines the position of the first
blank line in a frame. Line 0 is the first line of vertical sync
A.
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
Vertical blank end. Determines the position of the next line
after the last line of vertical blank. The last line of vertical
blank is D2CRTC_V_BLANK_END - 1.
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
Defines the position of the vertical blank region for CRTC2
D2CRTC_V_SYNC_A - RW - 32 bits - [GpuF0MMReg:0x6828]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-272
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D2CRTC_V_SYNC_A_START
12:0
0x0
D2CRTC_V_SYNC_A_END
28:16
0x0
Defines the position of vertical sync A for CRTC2
The first line of vertical sync A. In normal cases, it is set to
0. It is set to non-zero value only when trying to test the
higher bits of the vertical counter
Vertical sync A end. Determines the position of the next
line after the last line of vertical sync A. The last line of
vertical sync A is D2CRTC_V_SYNC_A_END - 1. The first
line of vertical sync A is line 0. This register value is
exclusive. It should be programmed to a value one greater
than the actual last line of vertical sync A
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
D2CRTC_V_SYNC_A_CNTL - RW - 32 bits - [GpuF0MMReg:0x682C]
Field Name
D2CRTC_V_SYNC_A_POL
Bits
0
Default
0x0
Description
Polarity of V SYNC A
0 = active high
1 = active low
Double-buffered with
D2MODE_MASTER_UPDATE_LOCK
Controls V SYNC A for CRTC2
D2CRTC_V_SYNC_B - RW - 32 bits - [GpuF0MMReg:0x6830]
Field Name
D2CRTC_V_SYNC_B_START
Bits
12:0
Default
0x0
D2CRTC_V_SYNC_B_END
28:16
0x0
Description
Vertical sync B start. Determines the position of the first
line of vertical sync B.
Vertical sync B end. Determines the position of the next
line after the last line of vertical sync B. Last line of vertical
sync B is D2CRTC_V_SYNC_B_END - 1. This register
value is exclusive. It should be programmed to a value one
greater than the actual last line of vertical sync B
Defines the position of vertical sync B for CRTC2
D2CRTC_V_SYNC_B_CNTL - RW - 32 bits - [GpuF0MMReg:0x6834]
Field Name
D2CRTC_V_SYNC_B_POL
Bits
0
Default
0x0
Description
Controls polarity of vertical sync B
0 = active high
1 = active low
Controls vertical sync B for CRTC2
D2CRTC_TRIGA_CNTL - RW - 32 bits - [GpuF0MMReg:0x6860]
Field Name
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
Default
Description
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-273
CRTC Control Registers
D2CRTC_TRIGA_SOURCE_SELECT
3:0
0x0
D2CRTC_TRIGA_POLARITY_SELECT
6:4
0x0
D2CRTC_TRIGA_RESYNC_BYPASS_E
N
8
0x0
D2CRTC_TRIGA_INPUT_STATUS (R)
9
0x0
D2CRTC_TRIGA_POLARITY_STATUS
(R)
D2CRTC_TRIGA_OCCURRED (R)
10
0x0
11
0x0
D2CRTC_TRIGA_RISING_EDGE_DETE
CT_CNTL
13:12
0x0
D2CRTC_TRIGA_FALLING_EDGE_DET
ECT_CNTL
17:16
0x0
D2CRTC_TRIGA_FREQUENCY_SELEC
T
21:20
0x0
D2CRTC_TRIGA_DELAY
D2CRTC_TRIGA_CLEAR (W)
28:24
31
0x0
0x0
Controls for external trigger A signal in CRTC2
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-274
Select source of input signals for external trigger A
0 = logic 0
1 = VSYNCA from another CRTC of the chip
2 = HSYNCA from another CRTC of the chip
3 = VSYNCB from another CRTC of the chip
4 = HSYNCB from another CRTC of the chip
5 = GENERICA pin
6 = GENERICB pin
7 = VSYNCA pin
8 = HSYNCA pin
9 = VSYNCB pin
10 = HSYNCB pin
11 = HPD1 pin
12 = HPD2 pin
13 = DVALID pin
14 = PSYNC pin
15 = Video capture complete signal from VIP
Selects source of input signal from polarity of external
trigger A
0 = logic 0
1 = interlace polarity from another CRTC of the chip
2 = GENERICA pin
3 = GENERICB pin
4 = HSYNCA pin
5 = HSYNCB pin
6 = video capture polarity input from VIP
7 = DVALID pin
Bypass the resync logic for the external trigger A signal and
its polarity input signal
0 = do not bypass
1 = bypass the resync logic
Read back the value of the external trigger A input signal
after the mux
Reports the value of the external trigger A polarity signal
after the mux
Reports whether external trigger A has occurred. A sticky
bit.
0 = has not occurred
1 = has occurred
Controls the detection of rising edge of the external trigger
A signal
00 = do not detect rising edge
01 = always detect rising edge
10 = detect rising edge only when field polarity is low
11 = detect rising edge only when field polarity is high
Controls the detection of falling edge of external trigger A
signal
00 = do not detect falling edge
01 = always detect falling edge
10 = detect falling edge only when field polarity is low
11 = detect falling edge only when field polarity is high
Determines the frequency of the external trigger A signal
00 = send every signal
01 = send every 2 signals
10 = reserved
11 = send every 4 signals
A programmable delay to send external trigger A signal
Clears the sticky bit D2CRTC_TRIGA_OCCURRED when
written with '1'
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D2CRTC_TRIGA_MANUAL_TRIG - RW - 32 bits - [GpuF0MMReg:0x6864]
Field Name
D2CRTC_TRIGA_MANUAL_TRIG (W)
Bits
0
Default
0x0
Manual trigger for external trigger A signal of CRTC2
Description
One shot trigger for external trigger A signal when written
with '1'
D2CRTC_TRIGB_CNTL - RW - 32 bits - [GpuF0MMReg:0x6868]
Field Name
D2CRTC_TRIGB_SOURCE_SELECT
Bits
3:0
Default
0x0
D2CRTC_TRIGB_POLARITY_SELECT
6:4
0x0
D2CRTC_TRIGB_RESYNC_BYPASS_E
N
8
0x0
D2CRTC_TRIGB_INPUT_STATUS (R)
9
0x0
D2CRTC_TRIGB_POLARITY_STATUS
(R)
D2CRTC_TRIGB_OCCURRED (R)
10
0x0
11
0x0
13:12
0x0
D2CRTC_TRIGB_RISING_EDGE_DETE
CT_CNTL
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Select source of input signals for external trigger B
0 = logic 0
1 = VSYNCA from another CRTC of the chip
2 = HSYNCA from another CRTC of the chip
3 = VSYNCB from another CRTC of the chip
4 = HSYNCB from another CRTC of the chip
5 = GENERICA pin
6 = GENERICB pin
7 = VSYNCA pin
8 = HSYNCA pin
9 = VSYNCB pin
10 = HSYNCB pin
11 = HPD1 pin
12 = HPD2 pin
13 = DVALID pin
14 = PSYNC pin
15 = Video capture complete signal from VIP
Selects source of input signal from polarity of external
trigger B
0 = logic 0
1 = interlace polarity from another CRTC of the chip
2 = GENERICA pin
3 = GENERICB pin
4 = HSYNCA pin
5 = HSYNCB pin
6 = video capture polarity input from VIP
7 = DVALID pin
Bypass the resync logic for the external trigger B signal and
its polarity input signal
0 = do not bypass
1 = bypass the resync logic
Read back the value of the external trigger B input signal
after the mux
Reports the value of the external trigger B polarity signal
after the mux
Reports whether external trigger B has occurred. A sticky
bit.
0 = has not occurred
1 = has occurred
Controls the detection of rising edge of the external trigger
B signal
00 = do not detect rising edge
01 = always detect rising edge
10 = detect rising edge only when field polarity is low
11 = detect rising edge only when field polarity is high
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-275
CRTC Control Registers
D2CRTC_TRIGB_FALLING_EDGE_DET
ECT_CNTL
17:16
0x0
D2CRTC_TRIGB_FREQUENCY_SELEC
T
21:20
0x0
D2CRTC_TRIGB_DELAY
D2CRTC_TRIGB_CLEAR (W)
28:24
31
0x0
0x0
Controls the detection of falling edge of external trigger B
signal
00 = do not detect falling edge
01 = always detect falling edge
10 = detect falling edge only when field polarity is low
11 = detect falling edge only when field polarity is high
Determines the frequency of the external trigger B signal
00 = send every signal
01 = send every 2 signals
10 = reserved
11 = send every 4 signals
A programmable delay to send external trigger B signal
Clears the sticky bit D2CRTC_TRIGB_OCCURRED when
written with '1'
Control for external trigger B signal of CRTC2
D2CRTC_TRIGB_MANUAL_TRIG - RW - 32 bits - [GpuF0MMReg:0x686C]
Field Name
D2CRTC_TRIGB_MANUAL_TRIG (W)
Bits
0
Default
0x0
Manual trigger for external trigger B signal of CRTC2
Description
One shot trigger for external trigger B signal when written
with '1'
D2CRTC_FORCE_COUNT_NOW_CNTL - RW - 32 bits - [GpuF0MMReg:0x6870]
Field Name
D2CRTC_FORCE_COUNT_NOW_MODE
Bits
1:0
Default
0x0
D2CRTC_FORCE_COUNT_NOW_TRIG_
SEL
8
0x0
D2CRTC_FORCE_COUNT_NOW_OCCU
RRED (R)
16
0x0
D2CRTC_FORCE_COUNT_NOW_CLEA
R (W)
Controls CRTC2 force count now logic
24
0x0
Description
Controls which timing counter is forced
0 = force counter now mode is disabled
1 = force H count now to H_TOTAL only
2 = force H count to H_TOTAL and V count to V_TOTAL in
progressive mode and V_TOTAL-1 in interlaced mode
3 = reserved
Selects the trigger signal as force count now trigger
0 = selects CRTC_TRIG_A and CRTC_TRIG_A_POL
1 = selects CRTC_TRIG_B and CRTC_TRIG_B_POL
Reports the status of force count now, a sticky bit.
0 = CRTC force count now has not occurred
1 = CRTC force count now has occurred
Resets D2CRTC_FORCE_COUNT_NOW_OCCURRED
when written with '1'
D2CRTC_FLOW_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6874]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-276
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D2CRTC_FLOW_CONTROL_SOURCE_
SELECT
4:0
0x0
D2CRTC_FLOW_CONTROL_POLARITY
8
0x0
D2CRTC_FLOW_CONTROL_GRANULA
RITY
16
0x0
D2CRTC_FLOW_CONTROL_INPUT_ST
ATUS (R)
24
0x0
Controls flow control of CRTC2
Selects the signal used for flow control in CRTC2
0 = logic 0
1 = GENERICA pin
2 = GENERICB pin
3 = HPD1 pin
4 = HPD2 pin
5 = DDC1DATA pin
6 = DDC1CLK pin
7 = DDC2DATA pin
8 = DDC2CLK pin
9 = DVOCLK(1) pin
10 = VHAD(0] pin
11 = VHAD[1] pin
12 = VPHCTL pin
13 = VIPCLK pin
14 = DVALID pin
15 = PSYNC pin
16 = a GPIO pin for dual-GPU, TBD
Reports the status of force count now, a sticky bit.
0 = CRTC force count now has not occurred
1 = CRTC force count now has occurred
Controls at which pixel position flow control can start to
happen
0 = flow control only start to happen on odd-even pixel
boundary
1 = flow control can start at any pixel position
Reports the value of the flow control input signal
0 = output of source mux of flow control signal is low
1 = output of source mux of flow control signal is high
D2CRTC_PIXEL_DATA_READBACK - RW - 32 bits - [GpuF0MMReg:0x6878]
Field Name
Bits
Default
Description
D2CRTC_PIXEL_DATA_BLUE_CB (R)
9:0
0x0
B/Cb component sent to DISPOUT
D2CRTC_PIXEL_DATA_GREEN_Y (R)
19:10
0x0
G/Y component sent to DISPOUT
D2CRTC_PIXEL_DATA_RED_CR (R)
29:20
0x0
R/Cr component sent to DISPOUT
Read back of the CRTC2 pixel data sent to DISPOUT. This is a debug register. Intended for use in one shot clocking mode.
D2CRTC_STEREO_FORCE_NEXT_EYE - RW - 32 bits - [GpuF0MMReg:0x687C]
Field Name
D2CRTC_STEREO_FORCE_NEXT_EYE
(W)
Bits
1:0
Default
0x0
Description
Force next frame eye view - One shot.
00: No force - next eye opposite of current eye
01: Right eye force - force right eye next field/frame
10: Left eye force - force right eye next field/frame
11: Reserved
After a force has occured, readback of this register will be
00
Force Next Eye register
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-277
CRTC Control Registers
D2CRTC_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6880]
Field Name
D2CRTC_MASTER_EN
Bits
0
Default
0x0
D2CRTC_SYNC_RESET_SEL
D2CRTC_DISABLE_POINT_CNTL
4
9:8
0x1
0x1
D2CRTC_CURRENT_MASTER_EN_STA
TE (R)
16
0x0
D2CRTC_DISP_READ_REQUEST_DISA
BLE
24
0x0
D2CRTC_PREFETCH_EN
28
0x0
D2CRTC_SOF_PULL_EN
29
0x0
Controls CRTC2 timing generator and data read request to display2
Description
Enables/Disables CRTC2. H counter is at H_TOTAL and V
counter is at first line of blank when CRTC is disabled.
0 = disabled
1 = enabled
Allows power management to lower CRTC2 enable.
When D2CRTC_MASTER_EN is set to 0, delay the
disabling of CRTC2 until certain point within the frame
00 = disable CRTC immediately
01 = delay disable CRTC until the end of the current line
10 = reserved
11 = delay disable CRTC until end of the first line in the
vertical blank region
Read-only field indicates the current status of the timing
generator. Can be used to poll for when a delayed disable
takes effect.
0 = CRTC is disabled
1 = CRTC is enabled
Disables data read request from the display controller. Can
be used to stop display reads from system memory but
keep display timing generation running. Has no effect if
CRTC is disabled.
0 = do not disable data read request
1 = disable data read request
Double buffered. Enable data prefetch for display 1
0 = do not enable prefetch
1 = enable data prefetch
At SOF, LB level can be set a a programmable value
(D2MODE_SOF_READ_PT), which is the point LB can
make requests to. Between SOF to active line, CRTC
needs to pull scaler/LB so that LB can make data requests
beyond that programmable point.
0 = do not enable pulling
1 = enable pulling
D2CRTC_BLANK_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6884]
Field Name
D2CRTC_CURRENT_BLANK_STATE (R)
D2CRTC_BLANK_DATA_EN
Bits
0
8
Default
0x0
0x0
Description
Read only status indicating current state of display
blanking.
0 = screen not blanked
1 = screen is blanked
Enable for blanking active display area. The active area of
display that is forced will use the
D2CRTC_BLACK_COLOR value.
This field is optionally double buffered with
D2CRTC_BLANK_DATA_DOUBLE_BUFFER_EN.
0 = disable blanking
1 = enable blanking
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-278
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D2CRTC_BLANK_DE_MODE
16
0x0
Determines whether BLANK and DATA_ACTIVE signal
keeps toggling when screen is blank
0 = toggles BLANK and DATA_ACTIVE
1 = keep BLANK active and DATA_ACTIVE inactive
Controls forced blanking of active area of display timing. Useful for display mode switches when corrupted image may be
generated for a frame or two.
D2CRTC_INTERLACE_CONTROL - RW - 32 bits - [GpuF0MMReg:0x6888]
Field Name
D2CRTC_INTERLACE_ENABLE
D2CRTC_INTERLACE_FORCE_NEXT_F
IELD (W)
Bits
0
Default
0x0
17:16
0x0
Description
Enables interlaced timing
0 = Progressive timing
1 = Interlaced timing
One shot force next field polarity when written
00 = does not force next field
01 = force only next field to odd
10 = force only next field to even
11 = does not force next field
Interlaced timing control for CRTC2
D2CRTC_INTERLACE_STATUS - RW - 32 bits - [GpuF0MMReg:0x688C]
Field Name
D2CRTC_INTERLACE_CURRENT_FIEL
D (R)
Bits
0
Default
0x0
Description
Reports the polarity of current field
0 = even
1 = odd
D2CRTC_INTERLACE_NEXT_FIELD (R)
1
0x0
Reports the polarity of the next field. Normally the opposite
of the current field. When
D2CRTC_INTERLACE_FORCE_NEXT_FIELD is used to
force polarity of next field, then next field can match current
field.
0 = even
1 = odd
Read-only register reports the polarity of the current and next field for interlaced timing
D2CRTC_BLANK_DATA_COLOR - RW - 32 bits - [GpuF0MMReg:0x6890]
Field Name
D2CRTC_BLANK_DATA_COLOR_BLUE
_CB
D2CRTC_BLANK_DATA_COLOR_GREE
N_Y
D2CRTC_BLANK_DATA_COLOR_RED_
CR
Set the color for pixels in blank region
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
9:0
Default
0x0
B / Cb component
Description
19:10
0x0
G / Y component
29:20
0x0
R / Cr component
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-279
CRTC Control Registers
D2CRTC_OVERSCAN_COLOR - RW - 32 bits - [GpuF0MMReg:0x6894]
Field Name
Bits
D2CRTC_OVERSCAN_COLOR_BLUE
9:0
D2CRTC_OVERSCAN_COLOR_GREEN
19:10
D2CRTC_OVERSCAN_COLOR_RED
29:20
Defines color of the overscan region for CRTC2
Default
0x0
0x0
0x0
B or Cb component
G or Y component
R or Cr component
Description
D2CRTC_BLACK_COLOR - RW - 32 bits - [GpuF0MMReg:0x6898]
Field Name
Bits
Default
Description
D2CRTC_BLACK_COLOR_B_CB
9:0
0x0
B / Cb component of the black color
D2CRTC_BLACK_COLOR_G_Y
19:10
0x0
G / Y component of the black color
D2CRTC_BLACK_COLOR_R_CR
29:20
0x0
R / Cr component of the black color
Black color applied to the active display region when blanking the screen
D2CRTC_STATUS - RW - 32 bits - [GpuF0MMReg:0x689C]
Field Name
D2CRTC_V_BLANK (R)
Bits
0
Default
0x0
D2CRTC_V_ACTIVE_DISP (R)
1
0x0
D2CRTC_V_SYNC_A (R)
2
0x0
D2CRTC_V_UPDATE (R)
3
0x0
D2CRTC_V_START_LINE (R)
4
0x0
D2CRTC_H_BLANK (R)
16
0x0
D2CRTC_H_ACTIVE_DISP (R)
17
0x0
D2CRTC_H_SYNC_A (R)
18
0x0
Reports the position of CRTC2
Description
Current vertical position
0 = outside vertical blank region
1 = within vertical blank region
Current vertical position
0 = outside vertical active display region
1 = within vertical active display region
Current vertical position
0 = outside VSYNC
1 = within VSYNC
Current vertical position
0 = outside the V_UPDATE region
1 = within the V_UPDATE region (between end of vertical
active display and start_line]
Current vertical position
0 = outside start_line region
1 = within start_line region
Current horizontal position
0 = outside horizontal blank region
1 = within horizontal blank region
Current horizontal region
0 = outside horizontal active display region
1 = within horizontal active display region
Current horizontal position
0 = outside horizontal sync
1 = within horizontal sync
D2CRTC_STATUS_POSITION - RW - 32 bits - [GpuF0MMReg:0x68A0]
Field Name
Bits
D2CRTC_VERT_COUNT (R)
12:0
D2CRTC_HORZ_COUNT (R)
28:16
Current horizontal and vertical count of CRTC2
Default
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-280
Description
Reports current vertical count
Reports current horizontal count
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D2CRTC_STATUS_FRAME_COUNT - RW - 32 bits - [GpuF0MMReg:0x68A4]
Field Name
D2CRTC_FRAME_COUNT (R)
Current frame count for CRTC2
Bits
23:0
Default
0x0
Description
Reports current frame count
D2CRTC_STATUS_VF_COUNT - RW - 32 bits - [GpuF0MMReg:0x68A8]
Field Name
Bits
Default
D2CRTC_VF_COUNT (R)
28:0
0x0
Current composite vertical and frame count for CRTC2
Description
Reports current vertical and frame count
D2CRTC_STATUS_HV_COUNT - RW - 32 bits - [GpuF0MMReg:0x68AC]
Field Name
D2CRTC_HV_COUNT (R)
Current composite H/V count of CRTC2
Bits
28:0
Default
0x0
Description
Reports current horizontal and vertical count
D2CRTC_COUNT_RESET - RW - 32 bits - [GpuF0MMReg:0x68B0]
Field Name
D2CRTC_RESET_FRAME_COUNT (W)
Bits
0
Default
0x0
Description
One-shot reset of frame counter of CRTC2 when written
with '1'
Resets CRTC2 counters
D2CRTC_COUNT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x68B4]
Field Name
D2CRTC_HORZ_COUNT_BY2_EN
Bits
0
Default
0x0
Description
Set to 1 for DVI 30bpp mode only, set to 0 otherwise
D2CRTC_HORZ_REPETITION_COUNT
7:4
0x0
Enable horizontal repetition. CRTC increments the H
counter every (COUNT+1) pixel clocks
0 = every clock
1 = every 2 clocks
2 = every 3 clocks
etc
Controls the counters in CRTC2
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-281
CRTC Control Registers
D2CRTC_MANUAL_FORCE_VSYNC_NEXT_LINE - RW - 32 bits - [GpuF0MMReg:0x68B8]
Field Name
D2CRTC_MANUAL_FORCE_VSYNC_NE
XT_LINE (W)
Manual force of VSYNC to happen next line
Bits
0
Default
0x0
Description
One shot force VSYNCA to happen next line when written
with '1'
D2CRTC_VERT_SYNC_CONTROL - RW - 32 bits - [GpuF0MMReg:0x68BC]
Field Name
D2CRTC_FORCE_VSYNC_NEXT_LINE_
OCCURRED (R)
Bits
0
Default
0x0
D2CRTC_FORCE_VSYNC_NEXT_LINE_
CLEAR (W)
8
0x0
D2CRTC_AUTO_FORCE_VSYNC_MOD
E
17:16
0x0
Controls the feature to force VSYNC next line for CRTC2
Description
Reports whether force vsync next line event has occurred.
Sticky bit.
0 = event has not occurred
1 = event has occurred
One shot clear to the sticky bit
D1CRTC_FORCE_VSYNC_NEXT_LINE_OCCURRED
when written with '1'
Selection of auto mode for forcing vsync next line
00 = disables auto mode
01 = force VSYNC next line on CRTC trigger A signal
10 = force VSYNC next line on CRTC trigger B signal
11 = reserved
D2CRTC_STEREO_STATUS - RW - 32 bits - [GpuF0MMReg:0x68C0]
Field Name
D2CRTC_STEREO_CURRENT_EYE (R)
Bits
0
Default
0x0
D2CRTC_STEREO_SYNC_OUTPUT (R)
D2CRTC_STEREO_SYNC_SELECT (R)
D2CRTC_STEREO_FORCE_NEXT_EYE
_PENDING (R)
8
16
25:24
0x0
0x0
0x0
Reports CRTC2 status in stereoscopic display
Description
Reports the polarity of the current frame/field
0 = right eye image
1 = left eye image
Reports current value of STEREOSYNC signal
Reports current value of SYNC_SELECT signal
Reports the status of
D2CRTC_STEREO_FORCE_NEXT_EYE write.
00: No force pending
01: Right force pending
10: Left force pending
11: Reserved
D2CRTC_STEREO_CONTROL - RW - 32 bits - [GpuF0MMReg:0x68C4]
Field Name
D2CRTC_STEREO_SYNC_OUTPUT_PO
LARITY
Bits
8
Default
0x0
D2CRTC_STEREO_SYNC_SELECT_PO
LARITY
16
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-282
Description
Controls polarity of the stereosync signal
0 = 0 means right eye image and 1 means left eye image
1 = 0 means left eye image and 1 means right eye image
Controls polarity of STEREO_SELECT signal sent to scaler
0 = 0 means right eye image and 1 means left eye image
1 = 0 means left eye image and 1 means right eye image
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D2CRTC_STEREO_EN
24
0x0
Enables toggling of STEREOSYNC and STEREO_SELECT
signals
0 = disable toggling.
1 = enable toggling at every frame (progressive) or every
field (interlace) at leading edge of VSYNCA
Stereosync control for CRTC2
D2CRTC_SNAPSHOT_STATUS - RW - 32 bits - [GpuF0MMReg:0x68C8]
Field Name
D2CRTC_SNAPSHOT_OCCURRED (R)
Bits
0
Default
0x0
D2CRTC_SNAPSHOT_CLEAR (W)
1
0x0
D2CRTC_SNAPSHOT_MANUAL_TRIGG
ER (W)
Controls CRTC2 snapshot
2
0x0
Description
Reports status of snapshot. A sticky bit to be cleared by
writing 1 to D2CRTC_SNAPSHOT_CLEAR
0 = snapshot has not occurred
1 = snapshot has occurred
Clears the D2CRTC_SNAPSHOT_OCCURRED sticky bit
when written with '1'
One shot trigger to perform snapshot when written with '1'
D2CRTC_SNAPSHOT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x68CC]
Field Name
D2CRTC_AUTO_SNAPSHOT_TRIG_SE
L
Bits
1:0
Default
0x0
Controls snapshot mode for CRTC2
Description
Determines signal source for auto-snapshot
00 = auto-snapshot is disabled
01 = uses CRTC trigger A as trigger event in auto-snapshot
mode
10 = uses CRTC trigger B as trigger event in auto-snapshot
mode
11 = reserved
D2CRTC_SNAPSHOT_POSITION - RW - 32 bits - [GpuF0MMReg:0x68D0]
Field Name
D2CRTC_SNAPSHOT_VERT_COUNT
(R)
D2CRTC_SNAPSHOT_HORZ_COUNT
(R)
Snapshot H and V count for CRTC2
Bits
12:0
Default
0x0
28:16
0x0
Description
Reads back the snapshoted vertical count
Reads back the snapshoted horizontal count
D2CRTC_SNAPSHOT_FRAME - RW - 32 bits - [GpuF0MMReg:0x68D4]
Field Name
D2CRTC_SNAPSHOT_FRAME_COUNT
(R)
Snapshot frame count of CRTC2
Bits
23:0
Default
0x0
Description
Reports the snapshoted frame count
D2CRTC_START_LINE_CONTROL - RW - 32 bits - [GpuF0MMReg:0x68D8]
Field Name
D2CRTC_PROGRESSIVE_START_LINE
_EARLY
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
Description
move start_line signal by 1 line eariler in progressive mode
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-283
CRTC Control Registers
D2CRTC_INTERLACE_START_LINE_EA
8
RLY
move start_line signal earlier by 1 line in CRTC2
0x1
move start_line signal by 1 line earlier in interlaced timing
mode
D2CRTC_INTERRUPT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x68DC]
Field Name
D2CRTC_SNAPSHOT_INT_MSK
Bits
0
Default
0x0
D2CRTC_SNAPSHOT_INT_TYPE
D2CRTC_V_UPDATE_INT_MSK
1
4
0x0
0x0
D2CRTC_V_UPDATE_INT_TYPE
D2CRTC_FORCE_COUNT_NOW_INT_M
SK
5
8
0x0
0x0
D2CRTC_FORCE_COUNT_NOW_INT_T
YPE
D2CRTC_FORCE_VSYNC_NEXT_LINE_
INT_MSK
9
0x0
16
0x0
D2CRTC_FORCE_VSYNC_NEXT_LINE_
INT_TYPE
D2CRTC_TRIGA_INT_MSK
17
0x0
24
0x0
D2CRTC_TRIGB_INT_MSK
25
0x0
D2CRTC_TRIGA_INT_TYPE
D2CRTC_TRIGB_INT_TYPE
Interrupt mask for CRTC2 events
26
27
0x0
0x0
Description
Interrupt mask for CRTC snapshot event
0 = disables interrupt
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
Interrupt mask for falling edge of V_UPDATE ^M
0 = disables interrupt^M
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
Interrupt mask for force count now event
0 = disables interrupt
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
Interrupt mask for force VSYNC next line event
0 = disables interrupt
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
Interrupt mask for CRTC external trigger A
0 = disables interrupt
1 = enables interrupt
Interrupt mask for CRTC external trigger B
0 = disables interrupt
1 = enables interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
0 is legacy level based interrupt, 1 is pulse based interrupt
D2MODE_MASTER_UPDATE_LOCK - RW - 32 bits - [GpuF0MMReg:0x68E0]
Field Name
D2MODE_MASTER_UPDATE_LOCK
Bits
0
Default
0x0
Description
Set the master update lock for V_UPDATE signal
0 = no master lock, V_UPDATE signal will occur
1 = set master lock to prevent V_UPDATE signal occuring,
thus prevent double buffering of display registers
Master update lock for CRTC2 V_UPDATE signal
D2MODE_MASTER_UPDATE_MODE - RW - 32 bits - [GpuF0MMReg:0x68E4]
Field Name
D2MODE_MASTER_UPDATE_MODE
Bits
2:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-284
Description
Controls the position of the V_UPDATE signal
000 = V_UPDATE occurs between end of active display
region and start line signal
001 = V_UPDATE occurs when leading edge of HSYNCA
meets leading edge of VSYNCA
010 = V_UPDATE occurs at the leading edge of VSYNC_A
011 = V_UPDATE occurs at the beginning of the first line of
vertical front porch
100 = V_UPDATE occurs at end of the line before start line
Others = Reserved
© 2007 Advanced Micro Devices, Inc.
Proprietary
CRTC Control Registers
D2MODE_MASTER_UPDATE_INTERLA
CED_MODE
17:16
0x0
Controls generation of V_UPDATE signal in interlaced
mode
00 = generates V_UPDATE at both even and odd field
01 = generates V_UPDATE only at even field. when
D1MODE_MASTER_UPDATE_MODE = 00, V_UPDATE
starts at odd field and ends at even field
10 = generates V_UPDATE only at odd field. when
D1MODE_MASTER_UPDATE_MODE = 00, V_UPDATE
starts at even field and ends at odd field
11 = reserved
Controls the generation of the V_UPDATE signal in CRTC2
D2CRTC_UPDATE_LOCK - RW - 32 bits - [GpuF0MMReg:0x68E8]
Field Name
D2CRTC_UPDATE_LOCK
Bits
0
Default
0x0
Description
Set the lock for CRTC timing registers
0 = no lock, double buffering can occur
1 = set lock to prevent double buffering
Update lock for CRTC2 timing registers
D2CRTC_DOUBLE_BUFFER_CONTROL - RW - 32 bits - [GpuF0MMReg:0x68EC]
Field Name
D2CRTC_UPDATE_PENDING (R)
Bits
0
Default
0x0
D2CRTC_UPDATE_INSTANTLY
8
0x0
D2CRTC_BLANK_DATA_DOUBLE_BUF
FER_EN
16
0x0
Description
Reports the status of double-buffered timing registers in
CRTC2
0 = update has completed
1 = update is still pending
Disables double buffering of CRTC2 timing registers
0 = enables double buffering
1 = disables double buffering
Enables the double buffering of
D2CRTC_BLANK_DATA_EN
0 = disables double buffering. D2CRTC_BLANK_DATA_EN
is updated immediately
1 = enables double buffering of
D2CRTC_BLANK_DATA_EN when V_UPDATE is active
Controls double buffering of CRTC2 registers
D2CRTC_VGA_PARAMETER_CAPTURE_MODE - RW - 32 bits - [GpuF0MMReg:0x68F0]
Field Name
D2CRTC_VGA_PARAMETER_CAPTUR
E_MODE
Bits
0
Controls how VGA timing parameters are captured
© 2007 Advanced Micro Devices, Inc.
Proprietary
Default
0x0
Description
Controls how VGA timing parameters are captured.
0: CRTC2 will continuously latch in timing parameters from
VGA
1: CRTC2 will continuously latch in timing parameters from
VGA except during VGA parameter recalculated window
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-285
Display Output Registers
2.9
Display Output Registers
2.9.1
Digital to Analog Converter (DAC) Registers
Registers for controlling the DAC links.
DAC A Registers
DACA_ENABLE - RW - 32 bits - [GpuF0MMReg:0x7800]
Field Name
DACA_ENABLE
Bits
0
Default
0x0
Turn on/off DACA
0=Disable
1=Enable
Description
DACA_SOURCE_SELECT - RW - 32 bits - [GpuF0MMReg:0x7804]
Field Name
DACA_SOURCE_SELECT
Bits
1:0
Default
0x0
Select between 1st display, 2nd display & TV encoder streams
Description
0=Source is CRTC1
1=Source is CRTC2
2=Source is TV Encoder
3=Reserved
DACA_CRC_EN - RW - 32 bits - [GpuF0MMReg:0x7808]
Field Name
DACA_CRC_EN
DACA_CRC_CONT_EN
Bits
0
Default
0x0
16
0x0
Description
Enable signal for DACA CRC
0=Disable
1=Enable
Determines whether CRC is calculated continuously or for
one frame (one shot)
0=CRC is calculated over 1 frame
1=CRC is continuously calculated for every frame
DACA CRC enable signals
DACA_CRC_CONTROL - RW - 32 bits - [GpuF0MMReg:0x780C]
Field Name
DACA_CRC_FIELD
DACA_CRC_ONLY_BLANKb
Bits
0
Default
0x0
8
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-286
Description
Controls which field polarity starts the DACA CRC block
after DACA_CRC_EN is set high. Used only for interlaced
mode CRCs
0=Even field begins CRC calculation
1=Odd field begins CRC calculation
Determines whether CRC is calculated for the whole frame
or only during non-blank period for DACA
0=CRC calculated over entire field
1=CRC calculated only during BLANKb
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DACA CRC controls signals
DACA_CRC_SIG_RGB_MASK - RW - 32 bits - [GpuF0MMReg:0x7810]
Field Name
DACA_CRC_SIG_BLUE_MASK
DACA_CRC_SIG_GREEN_MASK
DACA_CRC_SIG_RED_MASK
Mask bits for R, G & B CRC calculations
Bits
9:0
19:10
29:20
Default
0x3ff
0x3ff
0x3ff
Description
Mask bits for DACA B channel CRC
Mask bits for DACA G channel CRC
Mask bits for DACA R channel CRC
DACA_CRC_SIG_CONTROL_MASK - RW - 32 bits - [GpuF0MMReg:0x7814]
Field Name
DACA_CRC_SIG_CONTROL_MASK
Mask bits for DACA control signal CRC
Bits
5:0
Default
0x3f
Description
Mask bits for DACA control signal CRC
DACA_CRC_SIG_RGB - RW - 32 bits - [GpuF0MMReg:0x7818]
Field Name
DACA_CRC_SIG_BLUE (R)
DACA_CRC_SIG_GREEN (R)
DACA_CRC_SIG_RED (R)
DACA CRC R, G & B results
Bits
9:0
19:10
29:20
Default
0x3ff
0x3ff
0x3ff
Description
CRC signature value for DACA blue component
CRC signature value for DACA green component
CRC signature value for DACA red component
DACA_CRC_SIG_CONTROL - RW - 32 bits - [GpuF0MMReg:0x781C]
Field Name
Bits
DACA_CRC_SIG_CONTROL (R)
5:0
CRC signature value for DACA control signals
Default
0x3f
Description
CRC signature value for DACA control signals
DACA_SYNC_TRISTATE_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7820]
Field Name
DACA_HSYNCA_TRISTATE
DACA_VSYNCA_TRISTATE
DACA_SYNCA_TRISTATE
DACA SYNC Tristate control
Bits
0
8
16
Default
0x0
0x0
0x0
Description
DACA hsync tristate. Used to determine hsynca enable
DACA vsync tristate. Used to determine vsynca enable
DACA sync tristate. Used to determine sync enables
DACA_SYNC_SELECT - RW - 32 bits - [GpuF0MMReg:0x7824]
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-287
Display Output Registers
Field Name
DACA_SYNC_SELECT
DACA_STEREOSYNC_SELECT
Bits
0
Default
0x0
8
0x0
DACA ...SYNC selection
Description
0: selects sync_a
1: selects sync_b.
Used in conjunction with DACA_SOURCE_SEL(0).
0=DACA uses HSYNC_A & VSYNC_A
1=DACA used HSYNC_B & VSYNC_B
0: selects crtc1 stereosync
1: selects crtc2 stereosync
0=DACA uses CRTC1 STEREOSYNC
1=DACA uses CRTC2 STEREOSYNC
DACA_AUTODETECT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7828]
Field Name
DACA_AUTODETECT_MODE
Bits
1:0
Default
0x0
DACA_AUTODETECT_FRAME_TIME_C
OUNTER
15:8
0x0
DACA_AUTODETECT_CHECK_MASK
18:16
0x7
Description
Operation control of DACA Autodetect logic:
0: No checking
1: Connection checking
2: Disconnection checking
If an enabled display pipe is connected to DACA,
autodetect logic will count number of frames before DACA
comparator enabled.Otherwise, the autodetect logic will
count number of 0.1-second units.
Mask to select which of the 3 RGB channels will be checked
for connection or disconnection.
Bit 18: Check R/C channel if bit set to 1.
Bit 17: Check G/Y channel if bit set to 1.
Bit 16: Check B/Comp channel if bit set to 1.
DACA_AUTODETECT_CONTROL2 - RW - 32 bits - [GpuF0MMReg:0x782C]
Field Name
DACA_AUTODETECT_POWERUP_COU
NTER
DACA_AUTODETECT_TESTMODE
Bits
7:0
Default
0xb
8
0x0
Description
DACA macro Bandgap voltage reference power up time.
Default = 11 microseconds.
0: Normal operation
1: Test mode - count in 1us units
DACA_AUTODETECT_CONTROL3 - RW - 32 bits - [GpuF0MMReg:0x7830]
Field Name
DACA_AUTODET_COMPARATOR_IN_D
ELAY
DACA_AUTODET_COMPARATOR_OUT
_DELAY
Bits
7:0
Default
0x19
15:8
0x5
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-288
Description
DACA comparator delay for inputs to settle in autodetect
mode. Default = 25us
DACA comparator delay for outputs to settle in autodetect
mode. Default = 5us
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DACA_AUTODETECT_STATUS - RW - 32 bits - [GpuF0MMReg:0x7834]
Field Name
DACA_AUTODETECT_STATUS (R)
Bits
0
Default
0x0
4
0x0
DACA_AUTODETECT_RED_SENSE (R)
9:8
0x0
DACA_AUTODETECT_GREEN_SENSE
(R)
17:16
0x0
DACA_AUTODETECT_BLUE_SENSE
(R)
25:24
0x0
DACA_AUTODETECT_CONNECT (R)
Description
Result from autodetect logic sequence:
0: DACA was looking for a connection and has yet found a
connection or DACA was looking for a disconnection has
not yet found a disconnection
1: DACA was looking for a connection and found a
connection or DACA was looking for a disconnection and
found a disconnection
1: At least one channel has a properly terminated device
connected.
0: No devices are connected
Two bit result from last Red/C compare:
0: Channel is disconnected
1: Channel is connected
2: Channel is not checked
3: Reserved
Two bit result from last Green/Y compare:
0: Channel is disconnected
1: Channel is connected
2: Channel is not checked
3: Reserved
Two bit result from last Blue/Comp compare:
0: Channel is disconnected
1: Channel is connected
2: Channel is not checked
3: Reserved
DACA_AUTODETECT_INT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7838]
Field Name
DACA_AUTODETECT_ACK (W)
DACA_AUTODETECT_INT_ENABLE
Bits
0
Default
0x0
16
0x0
Description
Auto detect interrupt acknowledge and clear
DACA_AUTODETECT_STATUS bit.
Enable for auto detect interrupt
0=Disable
1=Enable
DACA_FORCE_OUTPUT_CNTL - RW - 32 bits - [GpuF0MMReg:0x783C]
Field Name
DACA_FORCE_DATA_EN
Bits
0
Default
0x0
DACA_FORCE_DATA_SEL
10:8
0x0
24
0x0
DACA_FORCE_DATA_ON_BLANKb_ON
LY
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Enable synchronous force option on DACA.
0=Disable
1=Enable
Select which DACA channels have data forced
0=Don't Force, 1=ForceBit
0: Blue channelBit
1: Green channelBit
2: Red channel
Data is force only during active region.
0=Disable
1=Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-289
Display Output Registers
Data Force Control
DACA_FORCE_DATA - RW - 32 bits - [GpuF0MMReg:0x7840]
Field Name
DACA_FORCE_DATA
Bits
9:0
Default
0x0
Description
Data to be forced on R, G & B channels. When auto detect
logic is enabled, this must be programmed to 0x000
(Default).
DACA_POWERDOWN - RW - 32 bits - [GpuF0MMReg:0x7850]
Field Name
DACA_POWERDOWN
Bits
0
DACA_POWERDOWN_BLUE
8
DACA_POWERDOWN_GREEN
16
DACA_POWERDOWN_RED
24
Controls for DACA Start-Up & Power-Down sequences
Default
0x0
0x0
0x0
0x0
Description
Bandgap Voltage Reference Power down enable
(BGSLEEP)
Blue channel power down enable (BDACPD)
Green channel power down enable (GDACPD)
Red channel power down enable (RDACPD)
DACA_CONTROL1 - RW - 32 bits - [GpuF0MMReg:0x7854]
Field Name
DACA_WHITE_LEVEL
DACA_WHITE_FINE_CONTROL
DACA_BANDGAP_ADJUSTMENT
DACA_ANALOG_MONITOR
DACA_COREMON
Bits
1:0
Default
0x0
13:8
21:16
27:24
28
0x20
0x20
0x0
0x0
Description
Video Standard Select bits - STD(1:0)
0x0: PAL
0x1: NTSC
PS2 (VGA)
0x3 HDTV (Component Video)
Full-scale Output Adjustment - DACADJ(4:0)
Bandgap Reference Voltage Adjustment - BGADJ(3:0)
Analog test mux select - MON(3:0)
Core voltage monitor input port
DACA_CONTROL2 - RW - 32 bits - [GpuF0MMReg:0x7858]
Field Name
DACA_DFORCE_EN
DACA_TV_ENABLE
Bits
0
Default
0x0
8
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-290
Description
DACA asynchronous data force enable. Can be used for
sync force as well but DACA_FORCE_OUTPUT_CNTL
achieves the same goal with a more complete feature set.
Asynchronous force requires DACA_x_ASYNC_ENABLE in
DACA_COMPARATOR_ENABLE to be set as well. Drives
DFORCE_EN pin on macro. Forces all DACA channels to
DACA_FORCE_DATA value. Overrides
DACA_FORCE_OUTPUT_CNTL/DACA_FORCE_DATA_E
N control.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DACA_ZSCALE_SHIFT
16
0x0
DACA zero scale shift enable. Causes DACA to add a
small offset to the levels of all outputs. Drives DACA
ZSCALE_SHIFT pin.
DACA_COMPARATOR_ENABLE - RW - 32 bits - [GpuF0MMReg:0x785C]
Field Name
DACA_COMP_DDET_REF_EN
Bits
0
Default
0x0
DACA_COMP_SDET_REF_EN
8
0x0
DACA_R_ASYNC_ENABLE
16
0x0
DACA_G_ASYNC_ENABLE
17
0x0
DACA_B_ASYNC_ENABLE
18
0x0
Description
Enables DACA comparators for analog termination
checking with DDETECT_REF as the reference. The
DDETECT reference level is lower than SDETECT_REF to
allow termination checking on an active channel while the
data being driven is the ZSCALE_SHIFT offset.Must be
used in conjunction with ZSCALE_SHIFT=1 and with some
forced data on the DAC inputs. Only one of
COMP_DDET_REF_EN and COMP_SDET_REF_EN
should be active at a time.Used in conjunction with core
logic to drive the DAC DDETECT pin.
0=Disable
1=Enable
Enables DACA comparators for analog termination
checking with SDETECT_REF as the reference. The data
must be forced to a sufficiently high value using one of the
DAC force features. Only one of COMP_DDET_REF_EN
and COMP_SDET_REF_EN should be active at a
time.Goes directly to the DAC SDETECT pin.
0=Disable
1=Enable
DACA red channel asynchronous mode enable.Allows DAC
outputs to be updated without a clock.Used in conjunction
with core logic to drive the DAC R_ASYNC_EN pin.
0=Disable
1=Enable
DACA green channel asynchronous mode enable.Used in
conjunction with core logic to drive the DAC G_ASYNC_EN
pin.
0=Disable
1=Enable
DACA blue channel asynchronous mode enable.Used in
conjunction with core logic to drive the DAC B_ASYNC_EN
pin.
0=Disable
1=Enable
DACA_COMPARATOR_OUTPUT - RW - 32 bits - [GpuF0MMReg:0x7860]
Field Name
DACA_COMPARATOR_OUTPUT (R)
DACA_COMPARATOR_OUTPUT_BLUE
(R)
DACA_COMPARATOR_OUTPUT_GREE
N (R)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
1
0x0
2
0x0
Description
Monitor Detect Output. This signal is an AND of 3 DAC
macro signals: R_CDET, G_YDET & B_COMPDET.
DACA blue channel comparator output ? value comes from
DAC R_CDET pin
DACA green channel comparator output ? value comes
from DAC G_YDET pin
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-291
Display Output Registers
DACA_COMPARATOR_OUTPUT_RED
(R)
3
0x0
DACA red channel comparator output ? value comes from
DAC B_COMPDET pin
DACA_TEST_ENABLE - RW - 32 bits - [GpuF0MMReg:0x7864]
Field Name
DACA_TEST_ENABLE
Bits
0
Default
0x0
DACATEST Enable
0=Disable
1=Enable
Description
DACA_PWR_CNTL - RW - 32 bits - [GpuF0MMReg:0x7868]
Field Name
DACA_BG_MODE
DACA_PWRCNTL
Bits
1:0
17:16
Default
0x0
0x0
Description
Bandgap macro configuration - BGMODE(1:0)
Macro bias current level control - PWRCNTL(1:0)
DACA_DFT_CONFIG - RW - 32 bits - [GpuF0MMReg:0x786C]
Field Name
DACA_DFT_CONFIG
Bits
31:0
Default
0x0
Description
Configuration for DACA DFT block
DAC B Registers
DACB_ENABLE - RW - 32 bits - [GpuF0MMReg:0x7A00]
Field Name
DACB_ENABLE
Bits
0
Default
0x0
Turn on/off DACB
0=Disable
1=Enable
Description
DACB_SOURCE_SELECT - RW - 32 bits - [GpuF0MMReg:0x7A04]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-292
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DACB_SOURCE_SELECT
1:0
0x0
0=Source is CRTC1
1=Source is CRTC2
2=Source is TV Encoder
3=Reserved
Select between 1st display, 2nd display & TV encoder streams
DACB_CRC_EN - RW - 32 bits - [GpuF0MMReg:0x7A08]
Field Name
DACB_CRC_EN
DACB_CRC_CONT_EN
Bits
0
Default
0x0
16
0x0
Description
Enable signal for DACB CRC
0=Disable
1=Enable
Determines whether CRC is calculated for the whole frame
or only during non-blank period for DACB
0=Disable
1=Enable
DACB CRC enable signals
DACB_CRC_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7A0C]
Field Name
DACB_CRC_FIELD
DACB_CRC_ONLY_BLANKb
Bits
0
Default
0x0
8
0x0
DACB CRC controls signals
Description
Controls which field polarity starts the DACB CRC block
after DACA_CRC_EN is set high. Used only for interlaced
mode CRCs.
0=Even field begins CRC calculation
1=Odd field begins CRC calculation
CRC only during the Non-blank region
0=CRC calculated over entire field
1=CRC calculated only during BLANKb
DACB_CRC_SIG_RGB_MASK - RW - 32 bits - [GpuF0MMReg:0x7A10]
Field Name
DACB_CRC_SIG_BLUE_MASK
DACB_CRC_SIG_GREEN_MASK
DACB_CRC_SIG_RED_MASK
Mask bits for R, G & B CRC calculations
Bits
9:0
19:10
29:20
Default
0x3ff
0x3ff
0x3ff
Description
Mask bits for DACB B channel CRC
Mask bits for DACB G channel CRC
Mask bits for DACB R channel CRC
DACB_CRC_SIG_CONTROL_MASK - RW - 32 bits - [GpuF0MMReg:0x7A14]
Field Name
DACB_CRC_SIG_CONTROL_MASK
Mask bits for DACB control signal CRC
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
5:0
Default
0x3f
Description
Mask bits for DACB control signal CRC
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-293
Display Output Registers
DACB_CRC_SIG_RGB - RW - 32 bits - [GpuF0MMReg:0x7A18]
Field Name
DACB_CRC_SIG_BLUE (R)
DACB_CRC_SIG_GREEN (R)
DACB_CRC_SIG_RED (R)
DACB CRC R, G & B results
Bits
9:0
19:10
29:20
Default
0x3ff
0x3ff
0x3ff
Description
CRC signature value for DACB blue component
CRC signature value for DACB green component
CRC signature value for DACB red component
DACB_CRC_SIG_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7A1C]
Field Name
Bits
DACB_CRC_SIG_CONTROL (R)
5:0
CRC signature value for DACB control signals
Default
0x3f
Description
CRC signature value for DACB control signals
DACB_SYNC_TRISTATE_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7A20]
Field Name
DACB_HSYNCB_TRISTATE
DACB_VSYNCB_TRISTATE
DACB_SYNCB_TRISTATE
DACB SYNC Tristate control
Bits
0
8
16
Default
0x0
0x0
0x0
Description
DACB hsync tristate. Used to determine hsyncb enable
DACB vsync tristate. Used to determine vsyncb enable
DACB sync tristate. Used to determine sync enables
DACB_SYNC_SELECT - RW - 32 bits - [GpuF0MMReg:0x7A24]
Field Name
DACB_SYNC_SELECT
DACB_STEREOSYNC_SELECT
Bits
0
Default
0x0
8
0x0
Description
0=DACB uses HSYNC_A & VSYNC_A
1=DACB used HSYNC_B & VSYNC_B
0=DACB uses CRTC1 STEREOSYNC
1=DACB uses CRTC2 STEREOSYNC
DACB_AUTODETECT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7A28]
Field Name
DACB_AUTODETECT_MODE
Bits
1:0
Default
0x0
DACB_AUTODETECT_FRAME_TIME_C
OUNTER
15:8
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-294
Description
Operation control of DACB Autodetect logic:
0: No checking
1: Connection checking
2: Disconnection checking
If an enabled display pipe is connected to DACB,
autodetect logic will count number of frames before DACB
comparator enabled.Otherwise, the autodetect logic will
count number of 0.1-second units.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DACB_AUTODETECT_CHECK_MASK
18:16
0x7
Mask to select which of the 3 RGB channels will be checked
for connection or disconnection.
Bit 18: Check R/C channel if bit set to 1.
Bit 17: Check G/Y channel if bit set to 1.
Bit 16: Check B/Comp channel if bit set to 1.
DACB_AUTODETECT_CONTROL2 - RW - 32 bits - [GpuF0MMReg:0x7A2C]
Field Name
DACB_AUTODETECT_POWERUP_COU
NTER
DACB_AUTODETECT_TESTMODE
Bits
7:0
Default
0xb
8
0x0
Description
DACB macro Bandgap voltage reference power up time.
Default = 11 microseconds.
0: Normal operation
1: Test mode - count in 1us units
DACB_AUTODETECT_CONTROL3 - RW - 32 bits - [GpuF0MMReg:0x7A30]
Field Name
DACB_AUTODET_COMPARATOR_IN_D
ELAY
DACB_AUTODET_COMPARATOR_OUT
_DELAY
Bits
7:0
Default
0x19
15:8
0x5
Description
DACB comparator delay for inputs to settle in autodetect
mode. Default = 25us
DACB comparator delay for outputs to settle in autodetect
mode. Default = 5us
DACB_AUTODETECT_STATUS - RW - 32 bits - [GpuF0MMReg:0x7A34]
Field Name
DACB_AUTODETECT_STATUS (R)
Bits
0
Default
0x0
4
0x0
DACB_AUTODETECT_RED_SENSE (R)
9:8
0x0
DACB_AUTODETECT_GREEN_SENSE
(R)
17:16
0x0
DACB_AUTODETECT_CONNECT (R)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Result from autodetect logic sequence:
0: DACB was looking for a connection and has yet found a
connection or DACB was looking for a disconnection has
not yet found a disconnection
1: DACB was looking for a connection and found a
connection or DACB was looking for a disconnection and
did not find a disconnection
0=No devices are connected
1=At least one channel has a properly terminated device
connected
Two bit result from last Red/C compare:
0: Channel is disconnected
1: Channel is connected
2: Channel is not checked
3: Reserved
Two bit result from last Green/Y compare:
0: Channel is disconnected
1: Channel is connected
2: Channel is not checked
3: Reserved
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-295
Display Output Registers
DACB_AUTODETECT_BLUE_SENSE
(R)
25:24
0x0
Two bit result from last Blue/Comp compare:
0: Channel is disconnected
1: Channel is connected
2: Channel is not checked
3: Reserved
DACB_AUTODETECT_INT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7A38]
Field Name
DACB_AUTODETECT_ACK (W)
DACB_AUTODETECT_INT_ENABLE
Bits
0
Default
0x0
16
0x0
Description
Auto detect interrupt acknowledge and clear
DACB_AUTODETECT_STATUS bit.
Enable for auto detect interrupt
0=Disable
1=Enable
DACB_FORCE_OUTPUT_CNTL - RW - 32 bits - [GpuF0MMReg:0x7A3C]
Field Name
DACB_FORCE_DATA_EN
Bits
0
Default
0x0
DACB_FORCE_DATA_SEL
10:8
0x0
24
0x0
DACB_FORCE_DATA_ON_BLANKb_ON
LY
Data Force Control
Description
Enable synchronous force option on DACB
0=Disable
1=Enable
Select which DACB channels have data forced
0=Don't Force, 1=Force
Bit 0: Blue channel
Bit 1: Green channel
Bit 2: Red channel
Data is force only during active region.
0=Disable
1=Enable
DACB_FORCE_DATA - RW - 32 bits - [GpuF0MMReg:0x7A40]
Field Name
DACB_FORCE_DATA
Bits
9:0
Default
0x0
Description
Data to be forced on R, G & B channels
DACB_POWERDOWN - RW - 32 bits - [GpuF0MMReg:0x7A50]
Field Name
DACB_POWERDOWN
DACB_POWERDOWN_BLUE
DACB_POWERDOWN_GREEN
DACB_POWERDOWN_RED
Bits
0
Default
0x0
8
16
24
0x0
0x0
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-296
Description
Bandgap Voltage Reference Power down enable
(BGSLEEP)ANDed with controls from power management
and TMDS2A power sequencer.
Blue channel power-down enable - BDACPD
Green channel power-down enable - GDACPD
Red channel power-down enable - RDACPD
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
Controls for DACB Start-Up & Power-Down sequences
DACB_CONTROL1 - RW - 32 bits - [GpuF0MMReg:0x7A54]
Field Name
DACB_WHITE_LEVEL
DACB_WHITE_FINE_CONTROL
DACB_BANDGAP_ADJUSTMENT
DACB_ANALOG_MONITOR
DACB_COREMON
Bits
1:0
Default
0x0
13:8
21:16
27:24
28
0x20
0x20
0x0
0x0
Description
Video Standard Select bits - STD(1:0)
0x0: PAL
0x1: NTSC
PS2 (VGA)
0x3 HDTV (Component Video)
Full-scale Output Adjustment - DACADJ(4:0)
Bandgap Reference Voltage Adjustment - BGADJ(3:0)
Analog test mux select - MON(3:0)
Core voltage monitor input port
DACB_CONTROL2 - RW - 32 bits - [GpuF0MMReg:0x7A58]
Field Name
DACB_DFORCE_EN
Bits
0
Default
0x0
DACB_TV_ENABLE
8
0x0
DACB_ZSCALE_SHIFT
16
0x0
Description
DACB asynchronous data force enable. Can be used for
sync force as well but DACB_FORCE_OUTPUT_CNTL
achieves the same goal with a more complete feature set.
Async force requires async bits in
DACB_COMPARATOR_ENABLE to be set as well. Drives
DFORCE_EN pin on macro. Forces all DACB channels to
DACB_FORCE_DATA value. Overrides
DACB_FORCE_OUTPUT_CNTL/DACB_FORCE_DATA_E
N control.
DACB tv enable. Controls DACB output demux. R/G/B is
selected when TV_ENABLE=0, Y/C/Comp when
TV_ENABLE=1. Drives DAC TVENABLE input.
DACB zero scale shift enable. Causes DAC to add a small
offset to the levels of all outputs. Drives DAC
ZSCALE_SHIFT pin.
DACB_COMPARATOR_ENABLE - RW - 32 bits - [GpuF0MMReg:0x7A5C]
Field Name
DACB_COMP_DDET_REF_EN
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
Description
Enables DACB comparators for analog termination
checking with DDETECT_REF as the reference. The
DDETECT reference level is lower than SDETECT_REF to
allow termination checking on an active channel while the
data being driven is the ZSCALE_SHIFT offset.Must be
used in conjunction with ZSCALE_SHIFT=1 or with some
forced data on the DAC inputs. Only one of
COMP_DDET_REF_EN and COMP_SDET_REF_EN
should be active at a time.Used in conjunction with core
logic to drive the DAC DDETECT pin.
0=Disable
1=Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-297
Display Output Registers
DACB_COMP_SDET_REF_EN
8
0x0
DACB_R_ASYNC_ENABLE
16
0x0
DACB_G_ASYNC_ENABLE
17
0x0
DACB_B_ASYNC_ENABLE
18
0x0
Enables DACB comparators for analog termination
checking with SDETECT_REF as the reference. The data
must be forced to a sufficiently high value using one of the
DAC force features. Only one of COMP_DDET_REF_EN
and COMP_SDET_REF_EN should be active at a
time.Goes directly to the DAC SDETECT pin.
0=Disable
1=Enable
DACB red channel asynchronous mode enable.Allows DAC
outputs to be updated without a clock.Used in conjunction
with core logic to drive the DAC R_ASYNC_EN pin.
0=Disable
1=Enable
DACB green channel asynchronous mode enable.Used in
conjunction with core logic to drive the DAC G_ASYNC_EN
pin.
0=Disable
1=Enable
DACB blue channel asynchronous mode enable.Used in
conjunction with core logic to drive the DAC B_ASYNC_EN
pin.
0=Disable
1=Enable
DACB_COMPARATOR_OUTPUT - RW - 32 bits - [GpuF0MMReg:0x7A60]
Field Name
DACB_COMPARATOR_OUTPUT (R)
DACB_COMPARATOR_OUTPUT_BLUE
(R)
DACB_COMPARATOR_OUTPUT_GREE
N (R)
DACB_COMPARATOR_OUTPUT_RED
(R)
Bits
0
Default
0x0
1
0x0
2
0x0
3
0x0
Description
Monitor Detect Output. This signal is an AND of 4 dac
macro signals: DETECT, RDACDET, GDACDET &
BDACDET.
DACB blue channel comparator output ? value comes from
DAC BDACDET pin
DACB green channel comparator output ? value comes
from DAC GDACDET pin
DACB red channel comparator output ? value comes from
DAC RDACDET pin
DACB_TEST_ENABLE - RW - 32 bits - [GpuF0MMReg:0x7A64]
Field Name
DACB_TEST_ENABLE
Bits
0
Default
0x0
DACBTEST Enable. Use for DAC test only. Drives DAC
Field Name
DACB_BG_MODE
Description
0=Disable
1=Enable
DACB_PWR_CNTL - RW - 32 bits - [GpuF0MMReg:0x7A68]
Bits
1:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-298
Description
DACB bandgap macro configuration. Allows bandgap
macro to be configured to optimize performance.Goes
directly to DAC BG_MODE[1:0] input.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DACB_PWRCNTL
17:16
0x0
DACB bias current level control. Allows analog bias current
levels to be adjusted for performance vs. power
consumption tradeoff.Goes directly to DAC PWRCNTL[1:0]
input.
Transition-Minimized Digital Stream (TMDS) Registers
Field Name
TMDSA_ENABLE
TMDSA_CNTL - RW - 32 bits - [GpuF0MMReg:0x7880]
Bits
0
Default
0x0
TMDSA_HDMI_EN
2
0x0
TMDSA_ENABLE_HPD_MASK
4
0x0
TMDSA_HPD_SELECT
9:8
0x0
TMDSA_SYNC_PHASE
12
0x1
TMDSA_PIXEL_ENCODING
16
0x0
TMDSA_DUAL_LINK_ENABLE
24
0x0
TMDSA_SWAP
28
0x0
Description
Enable for the reduction/encoding logic
0=Disable
1=Enable
Select DVI or HDMI mode
0=DVI
1=HDMI
0:Disallow
1:Allow override of TMDSA_ENABLE by HPD on
disconnect
0=Result from HPD circuit can not override
TMDSA_ENABLE
1=Result from HPD circuit can override TMDSA_ENABLE
on disconnect
Select which hot plug detect unit to use for TMDSA. This
selection is only relevant if one of the HPD mask bits in this
and other other registers is enabled.
0=Use HPD1
1=Use HPD2
2=use HPD3
Determine whether to reset phase signal on frame pulse
0: don't reset
1: reset
0=RGB 4:4:4 or YCBCR 4:4:4
1=YCbCr 4:2:2
Enable dual-link
0=Disable
1=Enable
Swap upper and lower data channels
0=Disable
1=Enable
TMDSA_SOURCE_SELECT - RW - 32 bits - [GpuF0MMReg:0x7884]
Field Name
TMDSA_SOURCE_SELECT
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
Description
Select between display stream 1 & display stream 2
0=CRTC1 data is used
1=CRTC2 data is used
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-299
Display Output Registers
TMDSA_SYNC_SELECT
8
0x0
TMDSA_STEREOSYNC_SELECT
16
0x0
Source Select control for Data, H/VSYNC & Stereosync
Select between SYNCA and SYNCB signals
0=HSYNC_A & VSYNC_A from the selected CRTC are
used
1=HSYNC_B & VSYNC_B from the selected CRTC are
used
Select between CRTC1 and CRTC2 sterosync signals
0=CRTC1 STEREOSYNC used
1=CRTC2 STEREOSYNC used
TMDSA_COLOR_FORMAT - RW - 32 bits - [GpuF0MMReg:0x7888]
Field Name
TMDSA_COLOR_FORMAT
Bits
1:0
Default
0x0
Description
Controls TMDSA output colour format. Formats 0 and 1
work in single or dual link. Format 2 requires dual link
(MSBs on primary link, LSBs on secondary link).
0=Normal (24bpp), Twin-Single 30bpp (8 MSBs of each
component), or Dual-Link 48bpp
1=Twin-Link 30bpp (2 LSB of each component)
2=Dual-Link 30bpp
3=Reserved
TMDSA_FORCE_OUTPUT_CNTL - RW - 32 bits - [GpuF0MMReg:0x788C]
Field Name
TMDSA_FORCE_DATA_EN
Bits
0
Default
0x0
TMDSA_FORCE_DATA_SEL
10:8
0x0
16
0x0
TMDSA_FORCE_DATA_ON_BLANKb_O
NLY
Data Force Control
Description
Enable force option on TMDSA
0=Disable
1=Enable
Select TMDSA channels that have data forced0=Don't
Force, 1=Force
Bit 0: Blue channeli
Bit 1: Green channel
Bit 2: Red channel
Data is forced only during active region.
0=Disable
1=Enable
TMDSA_FORCE_DATA - RW - 32 bits - [GpuF0MMReg:0x7890]
Field Name
TMDSA_FORCE_DATA
Bits
7:0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-300
Description
8 bit Data put on TMDS output data channels accordinging
to TMDSA_FORCE_DATA_SEL when Force feature
enabled (TMDSA_FORCE_DATA_EN = 1)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
TMDSA_BIT_DEPTH_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7894]
Field Name
TMDSA_TRUNCATE_EN
Bits
0
Default
0x0
Description
Enable bit reduction by truncation
0=Disable
1=Enable
TMDSA_TRUNCATE_DEPTH
4
0x0
Controls bits per pixel
0=18bpp
1=24bpp
TMDSA_SPATIAL_DITHER_EN
8
0x0
Enable bit reduction by spatial (random) dither
0=Disable
1=Enable
TMDSA_SPATIAL_DITHER_MODE
10:9
0x0
LFSR seed selection. 0: Seed pattern A(a,a), 1: seed
pattern A(a, ~a), 2: seed pattern AABB(a, ~a, b, ~b), 3:
seed pattern AABBCC(a, ~a, b, ~b, c, ~c)
TMDSA_SPATIAL_DITHER_DEPTH
12
0x0
Controls bits per pixel
0=18bpp
1=24bpp
TMDSA_FRAME_RANDOM_ENABLE
13
0x0
Control the LFSR reset, every frame or once at startup
0=0: RGB LFSR are reset every frame, 1: reset once at
startup/no reset on every frame
TMDSA_RGB_RANDOM_ENABLE
14
0x0
Control the pseudo-random number to be dithered on RGB
0=0: RGB use x^28+x^3+1 random number
1=1: R dithered with x^28+x^3+1, G dithered with
x^28+x^9+1 and B dithered with x^28+x^13+1
TMDSA_HIGHPASS_RANDOM_ENABLE
15
0x0
Highpass filter on RGB dithered channels
0=0: highpass filter is disable, 1: highpass filter is enable
on RGB
TMDSA_TEMPORAL_DITHER_EN
16
0x0
Enable bit reduction by temporal dither (frame mod.)
0=Disable
1=Enable
TMDSA_TEMPORAL_DITHER_DEPTH
20
0x0
Controls bits per pixel
0=18bpp
1=24bpp
TMDSA_TEMPORAL_DITHER_OFFSET
22:21
0x0
Add offset to RGB channel before temporal dithering
operation
0=For 24bpp: add offset[1:0] to RGB channels
1=For 18bpp: Add offset[1:0]x4 to RGB channels
TMDSA_TEMPORAL_LEVEL
24
0x0
Gray level select (2 or 4 levels)
0=Gray level 2(1 bit - LSB)
1=Gray level 4(2 bits - 2 LSBs)
TMDSA_TEMPORAL_DITHER_RESET
25
0x0
Reset temporal dither (frame modulation)
0=Temporal Dither Ready
1=Reset Temporal Dither Circuit
Control the method in which the data input into the TMDS block is reduced and the length it is reduced to.
TMDSA_CONTROL_CHAR - RW - 32 bits - [GpuF0MMReg:0x7898]
Field Name
Bits
Default
Description
TMDSA_CONTROL_CHAR0_OUT_EN
0
0x0
Programmable sync character 0 enable
TMDSA_CONTROL_CHAR1_OUT_EN
1
0x0
Programmable sync character 1 enable
TMDSA_CONTROL_CHAR2_OUT_EN
2
0x0
Programmable sync character 2 enable
TMDSA_CONTROL_CHAR3_OUT_EN
3
0x0
Programmable sync character 3 enable
SYNC Character Enable. Each bit represents the use of register defined sync character.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-301
Display Output Registers
TMDSA_CONTROL0_FEEDBACK - RW - 32 bits - [GpuF0MMReg:0x789C]
Field Name
TMDSA_CONTROL0_FEEDBACK_SELE
CT
TMDSA_CONTROL0_FEEDBACK_DELA
Y
Bits
1:0
Default
0x0
9:8
0x0
Description
Select input of CTL0 for TMDSA
Select delay of CTL0 for TMDSA
TMDSA_STEREOSYNC_CTL_SEL - RW - 32 bits - [GpuF0MMReg:0x78A0]
Field Name
TMDSA_STEREOSYNC_CTL_SEL
Bits
1:0
Default
0x0
Description
Controls which CTL signal STEREOSYNC goes on to
0=TMDS CTL registers have normal functionality
1=Stereosync will use TMDS CTL1 register
2=Stereosync will use TMDS CTL2 register
3=Stereosync will use TMDS CTL3 register
TMDSA_SYNC_CHAR_PATTERN_SEL - RW - 32 bits - [GpuF0MMReg:0x78A4]
Field Name
TMDSA_SYNC_CHAR_PATTERN_SEL
Not Currently Connected
Bits
3:0
Default
0x0
Reserved
Description
TMDSA_SYNC_CHAR_PATTERN_0_1 - RW - 32 bits - [GpuF0MMReg:0x78A8]
Field Name
TMDSA_SYNC_CHAR_PATTERN0
TMDSA_SYNC_CHAR_PATTERN1
Bits
9:0
25:16
Default
0x0
0x0
Description
TMDSA SYNC character set 0
TMDSA SYNC character set 1
TMDSA_SYNC_CHAR_PATTERN_2_3 - RW - 32 bits - [GpuF0MMReg:0x78AC]
Field Name
TMDSA_SYNC_CHAR_PATTERN2
TMDSA_SYNC_CHAR_PATTERN3
Bits
9:0
25:16
Default
0x0
0x0
Description
TMDSA SYNC character set 2
TMDSA SYNC character set 3
TMDSA_CRC_CNTL - RW - 32 bits - [GpuF0MMReg:0x78B0]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-302
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
TMDSA_CRC_EN
0
0x0
TMDSA_CRC_CONT_EN
4
0x0
TMDSA_CRC_ONLY_BLANKb
8
0x0
TMDSA_CRC_FIELD
12
0x0
TMDSA_2ND_CRC_EN
16
0x0
TMDSA_2ND_CRC_LINK_SEL
20
0x0
TMDSA_2ND_CRC_DATA_SEL
25:24
0x1
Enable TMDSA CRC Calculation
Enable TMDSA primary CRC calculation
0=Disable
1=Enable
Select continuous or one-shot mode for primary CRC
0=CRC is calculated over 1 frame
1=CRC is continuously calculated for every frame
Determines whether primary CRC is calculated for the
whole frame or only during non-blank period.
0=CRC calculated over entire field
1=CRC calculated only during BLANKb
Controls which field polarity starts the TMDSA CRC block
after TMDSA_CRC_EN is set to 1. Used only for interlaced
mode CRCs
0=Even field begins CRC calculation
1=Odd field begins CRC calculation
Enable TMDSA 2nd CRC calculation
0=Disable
1=Enable
Select which TMDS link to perform CRC on.
0=Perform CRC on link0
1=Perform CRC on link1
Select whether to perform CRC on all data or a subset of
the video frame.
0=2ND CRC calculated over entire field
1=2ND CRC calculated only during video data enable
(plus preamble and guard band in HDMI mode)
2=2ND CRC calculated over vertical blank region,
including VBI preamble and guard band region, excluding
horizontal blank
3=2ND CRC calculated only during audio data enable
TMDSA_CRC_SIG_MASK - RW - 32 bits - [GpuF0MMReg:0x78B4]
Field Name
TMDSA_CRC_SIG_BLUE_MASK
TMDSA_CRC_SIG_GREEN_MASK
TMDSA_CRC_SIG_RED_MASK
TMDSA_CRC_SIG_CONTROL_MASK
Bits
7:0
15:8
23:16
26:24
Default
0xff
0xff
0xff
0x7
RGB and Control CRC Mask
Description
CRC mask bits for TMDSA blue component
CRC mask bits for TMDSA green component
CRC mask bits for TMDSA red component
CRC mask bits for TMDSA control signals 3-bit input value:
bit 2 = Vsync
bit 1 = Hsync
bit 0 =Data Enable
TMDSA_CRC_SIG_RGB - RW - 32 bits - [GpuF0MMReg:0x78B8]
Field Name
TMDSA_CRC_SIG_BLUE (R)
TMDSA_CRC_SIG_GREEN (R)
TMDSA_CRC_SIG_RED (R)
TMDSA_CRC_SIG_CONTROL (R)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
7:0
15:8
23:16
26:24
Default
0x0
0x0
0x0
0x0
Description
CRC signature value for TMDSA blue component
CRC signature value for TMDSA green component
CRC signature value for TMDSA red component
CRC signature value for TMDSA control signals3-bit input
value:
bit 2 = Vsync
bit 1 = Hsync
bit 0 =Data Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-303
Display Output Registers
RGB and Control CRC Result
TMDSA_2ND_CRC_RESULT - RW - 32 bits - [GpuF0MMReg:0x78BC]
Field Name
TMDSA_2ND_CRC_RESULT (R)
Bits
29:0
Default
0x0
Description
Secondary TMDS CRC Result
TMDSA_TEST_PATTERN - RW - 32 bits - [GpuF0MMReg:0x78C0]
Field Name
TMDSA_TEST_PATTERN_OUT_EN
Bits
0
Default
0x0
TMDSA_HALF_CLOCK_PATTERN_SEL
1
0x0
TMDSA_RANDOM_PATTERN_OUT_EN
4
0x0
TMDSA_RANDOM_PATTERN_RESET
5
0x1
TMDSA_TEST_PATTERN_EXTERNAL_
RESET_EN
6
0x1
25:16
0x0
TMDSA_STATIC_TEST_PATTERN
Description
Controls the TMDSA output test pattern
0=Normal functionality determined by value of
TMDSA_RANDOM_PATTERN_OUT_EN register
1=Test pattern output mode. The value of
TMDSA_HALF_CLOCK_PATTERN_SEL determines
whether a static 10-bit test data pattern or an alternating
half-clock pattern will be output.
Controls between static pattern output and alternating static
pattern output
0=10 bit test pattern from
TMDSA_STATIC_TEST_PATTERN is sent for TMDS
output during every pixel clock
1=Alternating pattern of
TMDSA_STATIC_TEST_PATTERN and
!(TMDSA_STATIC_TEST_PATTERN) on each subsequent
pixel clock cycle is sent during every pixel clock
Enable for random pattern output
0=Normal
1=TMDS Random Pixel Data Generator circuit generates
24-bit pixel data to be encoded and transmitted
Reset random pattern to pattern seed
0=Enable Random Pixel Data Generator
1=Random Pixel Data Generator is Reset to the value in
TMDSA_RANDOM_PATTERN_SEED
0: Normal
1: Hold non-static test pattern (random, half clock) in reset
when external signal is asserted
0=Normal
1=External signal resets random and half clock patterns
TMDSA test pixel. Replace the pixel value when
TMDSA_TEST_PATTERN_OUT_EN=1
TMDSA_RANDOM_PATTERN_SEED - RW - 32 bits - [GpuF0MMReg:0x78C4]
Field Name
TMDSA_RANDOM_PATTERN_SEED
Bits
23:0
Default
0x22222
2
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-304
Description
Initial pattern for eye pattern measurement
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
TMDSA_RAN_PAT_DURING_DE_ONLY
24
0x0
Controls between random pattern out during entire field and
DE
0=TMDS Random Data Pattern is output for all pixels
1=TMDS Random Data Pattern is only output when DE is
high
TMDSA_DEBUG - RW - 32 bits - [GpuF0MMReg:0x78C8]
Field Name
TMDSA_DEBUG_EN
TMDSA_DEBUG_HSYNC
TMDSA_DEBUG_HSYNC_EN
TMDSA_DEBUG_VSYNC
TMDSA_DEBUG_VSYNC_EN
TMDSA_DEBUG_DE
TMDSA_DEBUG_DE_EN
Bits
0
8
9
16
17
24
25
Default
0x0
0x0
0x0
0x0
0x0
0x0
0x0
Description
Set to 1 to enable debug mode
Debug mode HSYNC
Set to 1 to enable debug mode HSYNC
Debug mode VSYNC
Set to 1 to enable debug mode VSYNC
Debug mode display enable
Set to 1 to enable debug mode display enable
TMDSA_CTL_BITS - RW - 32 bits - [GpuF0MMReg:0x78CC]
TMDSA_CTL0
TMDSA_CTL1
TMDSA_CTL2
TMDSA_CTL3
Field Name
Bits
0
8
16
24
Default
0x0
0x0
0x0
0x0
Description
Control signal for TMDSA (encoded in Green channel).
Control signal for TMDSA (encoded in Green channel).
Control signal for TMDSA (encoded in Red channel).
Control signal for TMDSA (encoded in Red channel).
TMDSA_DCBALANCER_CONTROL - RW - 32 bits - [GpuF0MMReg:0x78D0]
Field Name
TMDSA_DCBALANCER_EN
TMDSA_DCBALANCER_TEST_EN
TMDSA_DCBALANCER_TEST_IN
TMDSA_DCBALANCER_FORCE
Bits
0
Default
0x1
8
19:16
24
0x0
0x0
0x0
Description
DC Balancer Enable
0=Disable
1=Enable
DC Balancer Test Enable
DC Balancer Test Input
DC Balancer select value to use when
DCBALANCER_EN=0
TMDSA_RED_BLUE_SWITCH - RW - 32 bits - [GpuF0MMReg:0x78D4]
Field Name
TMDSA_RB_SWITCH_EN
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
Description
Switch Red and Blue encoding position.
0=Disable
1=Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-305
Display Output Registers
TMDSA_DATA_SYNCHRONIZATION - RW - 32 bits - [GpuF0MMReg:0x78DC]
Field Name
TMDSA_DSYNSEL
Bits
0
Default
0x1
TMDSA_PFREQCHG (W)
8
0x0
TMDSA Data Sychronization Control
Description
Data synchronization circuit select enable
0=Disable
1=Enable
Write to 1 to restarts read and write address generation
logic. Write of 0 has no effect. Read value is always 0.
PFREQCHG must be written to 1 when the data
synchronizer is started by setting DSYNSEL to 1,
TMDSA_DUAL_LINK_ENABLE is reprogrammed, or either
PCLK_TMDSA or PCLK_TMDSA_DIRECT (IDCLK) is
reprogrammed or stopped and restarted.
TMDSA_CTL0_1_GEN_CNTL - RW - 32 bits - [GpuF0MMReg:0x78E0]
Field Name
TMDSA_CTL0_DATA_SEL
Bits
3:0
Default
0x0
TMDSA_CTL0_DATA_DELAY
6:4
0x0
TMDSA_CTL0_DATA_INVERT
7
0x0
TMDSA_CTL0_DATA_MODULATION
9:8
0x0
TMDSA_CTL0_USE_FEEDBACK_PATH
TMDSA_CTL0_FB_SYNC_CONT
10
11
0x0
0x0
TMDSA_CTL0_PATTERN_OUT_EN
12
0x0
19:16
0x0
TMDSA_CTL1_DATA_SEL
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-306
Description
Select data to be used to generate CTL0 pattern (selected
fields are ORed together)
[0]: Display Enable
[1]: VSYNC
[2]: HSYNC
[3] Random data
Number of pixel clocks to delay CTL0 data
0=CTL0 data is delayed 0 pixel clocks
1=CTL0 data is delayed 1 pixel clocks
2=CTL0 data is delayed 2 pixel clocks
3=CTL0 data is delayed 3 pixel clocks
4=CTL0 data is delayed 4 pixel clocks
5=CTL0 data is delayed 5 pixel clocks
6=CTL0 data is delayed 6 pixel clocks
7=CTL0 data is delayed 7 pixel clocks
Set to 1 to invert CTL0 data
0=CTL0 data is normal
1=CTL0 data is inverted
CTL0 data modulation control
0=CTL0 data is not modulated
1=CTL0 data is modulated by bit 0 of 2 bit counter
2=CTL0 data is modulated by bit 1 of 2 bit counter
3=CTL0 data is modulated every time 2 bit counter
overflows
Set to 1 to enable CTL0 internal feedback path
Set to 1 to force continunous toggle on CTL0 internal
feedback path
Select CTL0 output data
0=Register value
1=Pattern generator output
Select data to be used to generate CTL1 pattern (selected
fields are ORed together)
[0]: Display Enable
[1]: VSYNC
[2]: HSYNC
[3] Always (blank time)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
TMDSA_CTL1_DATA_DELAY
22:20
0x0
TMDSA_CTL1_DATA_INVERT
23
0x0
25:24
0x0
TMDSA_CTL1_USE_FEEDBACK_PATH
TMDSA_CTL1_FB_SYNC_CONT
26
27
0x0
0x0
TMDSA_CTL1_PATTERN_OUT_EN
28
0x0
TMDSA_2BIT_COUNTER_EN
31
0x0
TMDSA_CTL1_DATA_MODULATION
Number of pixel clocks to delay CTL1 data
0=CTL1 data is delayed 0 pixel clocks
1=CTL1 data is delayed 1 pixel clocks
2=CTL1 data is delayed 2 pixel clocks
3=CTL1 data is delayed 3 pixel clocks
4=CTL1 data is delayed 4 pixel clocks
5=CTL1 data is delayed 5 pixel clocks
6=CTL1 data is delayed 6 pixel clocks
7=CTL1 data is delayed 7 pixel clocks
Set to 1 to invert CTL1 data
0=CTL1 data is normal
1=CTL1 data is inverted
CTL1 data modulation control
0=CTL1 data is not modulated
1=CTL1 data is modulated by bit 0 of 2 bit counter
2=CTL1 data is modulated by bit 1 of 2 bit counter
3=CTL1 data is modulated every time 2 bit counter
overflows
Set to 1 to enable CTL1 internal feedback path
Set to 1 to force continunous toggle on CTL1 internal
feedback path
Select CTL1 output data
0=Register value
1=Pattern generator output
Set to 1 to enable 2-bit data modulation counter
0=Disable
1=Enable
TMDSA_CTL2_3_GEN_CNTL - RW - 32 bits - [GpuF0MMReg:0x78E4]
Field Name
TMDSA_CTL2_DATA_SEL
Bits
3:0
Default
0x0
TMDSA_CTL2_DATA_DELAY
6:4
0x0
TMDSA_CTL2_DATA_INVERT
7
0x0
TMDSA_CTL2_DATA_MODULATION
9:8
0x0
TMDSA_CTL2_USE_FEEDBACK_PATH
10
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Select data to be used to generate CTL2 pattern (selected
fields are ORed together)
[0]: Display Enable
[1]: VSYNC
[2]: HSYNC
[3] Always (blank time)
Number of pixel clocks to delay CTL2 data
0=CTL2 data is delayed 0 pixel clocks
1=CTL2 data is delayed 1 pixel clocks
2=CTL2 data is delayed 2 pixel clocks
3=CTL2 data is delayed 3 pixel clocks
4=CTL2 data is delayed 4 pixel clocks
5=CTL2 data is delayed 5 pixel clocks
6=CTL2 data is delayed 6 pixel clocks
7=CTL2 data is delayed 7 pixel clocks
Set to 1 to invert CTL2 data
0=CTL2 data is normal
1=CTL2 data is inverted
CTL2 data modulation control
0=CTL2 data is not modulated
1=CTL2 data is modulated by bit 0 of 2 bit counter
2=CTL2 data is modulated by bit 1 of 2 bit counter
3=CTL2 data is modulated every time 2 bit counter
overflows
Set to 1 to enable CTL2 internal feedback path
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-307
Display Output Registers
TMDSA_CTL2_FB_SYNC_CONT
11
0x0
TMDSA_CTL2_PATTERN_OUT_EN
12
0x0
TMDSA_CTL3_DATA_SEL
19:16
0x0
TMDSA_CTL3_DATA_DELAY
22:20
0x0
TMDSA_CTL3_DATA_INVERT
23
0x0
25:24
0x0
TMDSA_CTL3_USE_FEEDBACK_PATH
TMDSA_CTL3_FB_SYNC_CONT
26
27
0x0
0x0
TMDSA_CTL3_PATTERN_OUT_EN
28
0x0
TMDSA_CTL3_DATA_MODULATION
Set to 1 to force continunous toggle on CTL2 internal
feedback path
Select CTL2 output data
0=Register value
1=Pattern generator output
Select data to be used to generate CTL3 pattern (selected
fields are ORed together)
[0]: Display Enable
[1]: VSYNC
[2]: HSYNC
[3] Always (blank time)
Number of pixel clocks to delay CTL3 data
0=CTL3 data is delayed 0 pixel clocks
1=CTL3 data is delayed 1 pixel clocks
2=CTL3 data is delayed 2 pixel clocks
3=CTL3 data is delayed 3 pixel clocks
4=CTL3 data is delayed 4 pixel clocks
5=CTL3 data is delayed 5 pixel clocks
6=CTL3 data is delayed 6 pixel clocks
7=CTL3 data is delayed 7 pixel clocks
Set to 1 to invert CTL3 data
0=CTL3 data is normal
1=CTL3 data is inverted
CTL3 data modulation control
0=CTL3 data is not modulated
1=CTL3 data is modulated by bit 0 of 2 bit counter
2=CTL3 data is modulated by bit 1 of 2 bit counter
3=CTL3 data is modulated every time 2 bit counter
overflows
Set to 1 to enable CTL3 internal feedback path
Set to 1 to force continunous toggle on CTL3 internal
feedback path
Select CTL3 output data
0=Register value
1=Pattern generator output
TMDSA_TRANSMITTER_ENABLE - RW - 32 bits - [GpuF0MMReg:0x7904]
Field Name
TMDSA_TX0_ENABLE
Bits
0
Default
0x0
TMDSA_LNKC0EN
1
0x0
TMDSA_LNKD00EN
2
0x0
TMDSA_LNKD01EN
3
0x0
TMDSA_LNKD02EN
4
0x0
TMDSA_TX1_ENABLE
8
0x0
TMDSA_LNKC1EN
TMDSA_LNKD10EN
9
10
0x0
0x0
TMDSA_LNKD11EN
11
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-308
Description
TMDSA link0 enable (ILNK0EN)(set to 1 whenever TMDS
is enabled)
0=Disable
1=Enable
TMDSA clock channel enable (ICHCEN)(set to 1 whenever
TMDS is enabled)
TMDSA link0 data channel 0 enable (ICHD0EN)(set to 1
whenever TMDS is enabled)
TMDSA link0 data channel 1 enable (ICHD1EN)(set to 1
whenever TMDS is enabled)
TMDSA link0 data channel 2 enable (ICHD2EN)(set to 1
whenever TMDS is enabled)
TMDSA link1 enable (ILNKD1EN)(set to 1 whenever TMDS
is enabled in dual-link mode)
TMDSA link1 data channel 0 enable (ICHD3EN)(set to 1
whenever TMDS is enabled in dual-link mode)
TMDSA link1 data channel 1 enable (ICHD4EN)(set to 1
whenever TMDS is enabled in dual-link mode)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
TMDSA_LNKD12EN
12
0x0
TMDSA_TX_ENABLE_HPD_MASK
16
0x0
TMDSA_LNKCEN_HPD_MASK
17
0x0
TMDSA_LNKDEN_HPD_MASK
18
0x0
TMDSA link1 data channel 2 enable (ICHD5EN)(set to 1
whenever TMDS is enabled in dual-link mode)
0:Disallow
1:Allow override of TMDSA_TXX_ENABLE by HPD on
disconnect
0=Result from HPD circuit can not override
TMDSA_TXX_ENABLE
1=Result from HPD circuit can override
TMDSA_TXX_ENABLE on disconnect
0:Disallow
1:Allow override of TMDSA_LNKCXEN by HPD on
disconnect
0=Result from HPD circuit can not override
TMDSA_LNKC0EN
1=Result from HPD circuit overrides TMDSA_LNKC0EN
on disconnect
0:Disallow
1:Allow override of TMDSA_LNKDXEN by HPD on
disconnect
0=Result from HPD circuit can not override
TMDSA_LNKDXEN
1=Result from HPD circuit overrides TMDSA_LNKDXEN
on disconnect
TMDSA_LOAD_DETECT - RW - 32 bits - [GpuF0MMReg:0x7908]
Field Name
TMDSA_LOAD_DETECT_ENABLE
TMDSA_LOAD_DETECT (R)
Bits
0
Default
0x1
4
0x0
Description
0: Disable
1: Enable TMDSA macro load detect functionDrives IMSEN
macro input
From TMDSA macro OMSEN output
0: No load detected
1: Load detected
TMDSA_PLL_ADJUST - RW - 32 bits - [GpuF0MMReg:0x790C]
Field Name
TMDSA_PLL_CP_GAIN
TMDSA_PLL_VCO_GAIN
TMDSA_PLL_DUTY_CYCLE
Bits
5:0
13:8
17:16
Default
0xb
0x7
0x0
Description
tmds macro channel A&B charge pump gain control
tmds macro channel A&B vco control
tmds macro channel A&B clock duty cycle control
TMDSA_TRANSMITTER_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7910]
Field Name
TMDSA_PLL_ENABLE
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
Description
TMDSA transmitter's PLL enable. This can power down the
PLL.
0=Disable
1=Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-309
Display Output Registers
TMDSA_PLL_RESET
1
0x1
3:2
0x0
TMDSA_IDSCKSELA
4
0x1
TMDSA_IDSCKSELB
5
0x1
TMDSA_PLL_PWRUP_SEQ_EN
6
0x0
TMDSA_PLL_RESET_HPD_MASK
7
0x0
TMDSA_TMCLK
TMDSA_TMCLK_FROM_PADS
12:8
13
0x0
0x0
TMDSA_TDCLK
TMDSA_TDCLK_FROM_PADS
14
15
0x0
0x0
TMDSA_PLLSEL_OVERWRITE_EN
16
0x0
TMDSA_PLLSELA
17
0x0
TMDSA_PLLSELB
18
0x0
TMDSA_PLL_ENABLE_HPD_MASK
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-310
TMDSA transmitter's PLL reset. PLL will start the locking
acquisition process once this becomes low.
Determines whether result from HPD circuit can override
TMDSA_PLL_ENABLE and TMDSA_PLL_RESET
Bit 0: Set to 1 to enable override on disconnect
Bit 1: Set to 1 to enable override on connect.
0=Result from HPD circuit can not override
TMDSA_PLL_ENABLE
1=Result from HPD circuit overrides
TMDSA_PLL_ENABLE on disconnect
2=Result from HPD circuit overrides
TMDSA_PLL_ENABLE on connect
3=Result from HPD circuit overrides
TMDSA_PLL_ENABLE
Select TMDSA tramsmitter A to use IPIXCLK or IDCLK
0=TMDS Transmitter A uses pclk_tmdsa (IPIXCLK)
1=TMDS Transmitter A uses pclk_tmdsa_direct (IDCLK)
Select TMDSA tramsmitter B to use IPIXCLK or IDCLK.
This bit applies only to TMDS dual link or/and TMDS SWAP
mode.
0=TMDS Transmitter B uses pclk_tmdsa (IPIXCLK)
1=TMDS Transmitter B uses pclk_tmdsa_direct (IDCLK)
Enable hardware delay of PLL enable / reset on power up /
down to match macro timing requirements. When
TMDSA_PLL_PWRUP_SEQ_EN=1, PLL will be reset 1 us
before PLL enable is deasserted, and PLL reset will be
asserted for 10 us after PLL enable is asserted. This timing
is provided to match the TMDS macro timing specification.
0=Disabled
1=Delay Enable/ Reset for clean PLL power up/down
Set this bit to automatically reset TMDS macro PLL on HPD
connect event, reset pulse= 10us
0=TMDS macro pll is not reset on hot plug detect connect
1=TMDS macro pll reset on hot plug detect for 10 us
For macro debug only
Controls input to ITMCLK pin on macro for macro debug
only
0=Input to ITMCLK pins on macro come from
TMDSA_TMCLK field
1=Input to ITMCLK pins on macro come from pads
For macro debug only
Controls input to ITDCLK pin on macro for macro debug
only
0=Input to ITDCLK pin on macro comes from
TMDSA_TDCLK field
1=Input to ITDCLK pin on macro comes from pads
Enable overwrite of TMDSA_PLSELA & TMDSA_PLSELA,
because normally harware automatically set
TMDSA_PLLSELA & TMDSA_PLLSELB bits
0=Hardware automatically selects PLLSELA and
PLLSELB based on diff. modes. OVERWRITE is disabled
1=Overwrite hardware pll selection in TMDSA_PLSELA &
TMDSA_PLSELB fiels. Enable software overwrite.
Normally, this bit is automatically selected in hardware.
Effective only when TMDSA_PLLSEL_OVERWRITE_EN is
1
Normally, this bit is automatically selected in hardware.
Effective only when TMDSA_PLLSEL_OVERWRITE_EN is
1
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
TMDSA_BYPASS_PLLA
28
0x1
TMDSA_BYPASS_PLLB
29
0x1
TMDSA_INPUT_TEST_CLK_SEL1
TMDSA_INPUT_TEST_CLK_SEL2
30
31
0x0
0x0
Controls ICHCSELA pin on TMDSA macro
0: Coherent mode: transmitted A clock is PLL output
1: Incoherent mode: transmitted A clock is PLL input
0=0: TMDS transmitter A is in coherent mode
1=1: Tmds transmitter A is in incoherent mode
Controls ICHCSELA pin on TMDSA macro
0: Coherent mode: transmitted B clock is PLL output
1: Incoherent mode: transmitted B clock is PLL input
0=0: TMDS transmitter B is in coherent mode
1=1: Tmds transmitter B is in incoherent mode
Controls ITCLKSEL1 pin on TMDSA macro
Controls ITCLKSEL2 pin on TMDSA macro
TMDSA_REG_TEST_OUTPUTA - RW - 32 bits - [GpuF0MMReg:0x7914]
Field Name
TMDSA_REG_TEST_OUTPUTA (R)
TMDSA_TEST_CNTLA
TMDSA_TEST_OUTPUT_SELECT
Bits
9:0
Default
0x0
17:16
0x0
20
0x0
Description
Outputs of the 10 shift registers (OTDATX[9:0]) from one of
the channels during test mode.
Selects which of 3 register test output channels from
TMDSA macro is visible in
TMDSA_REG_TEST_OUTPUTA.
0=OTDATA0
1=OTDATA1
2=OTDATA2
3=N/A
ENABLE TEST_OUTPUTA & TEST_OUTPUTB
TMDSA_TRANSMITTER_DEBUG - RW - 32 bits - [GpuF0MMReg:0x7918]
Field Name
TMDSA_PLL_DEBUG
TMDSA_TX_DEBUG
Reserved for debugging purposes
Bits
7:0
15:8
Default
0x0
0x0
Description
Drives ITPL pins on TMDSA macro
Drives ITX pins on TMDSA macro
TMDSA_DITHER_RAND_SEED - RW - 32 bits - [GpuF0MMReg:0x791C]
Field Name
TMDSA_RAND_R_SEED
Bits
7:0
Default
0x0
TMDSA_RAND_G_SEED
15:8
0x99
TMDSA_RAND_B_SEED
23:16
0xdd
Description
Seed for random red, the random seed is 1'b1,
TMDSA_RAND_R_SEED[2:0], 3TMDSA_RAND_R_SEED
= 28 bits
Seed for random green, the random seed is 1'b1,
TMDSA_RAND_G_SEED[2:0], 3TMDSA_RAND_G_SEED
= 28 bits
Seed for random bleu, the random seed is 1'b1,
TMDSA_RAND_B_SEED[2:0], 3TMDSA_RAND_B_SEED
= 28 bits
programmable seed for random dithering
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-311
Display Output Registers
TMDSA_TRANSMITTER_ADJUST - RW - 32 bits - [GpuF0MMReg:0x7920]
Field Name
TMDSA_TX_VOLTAGE_SWING_A
TMDSA_TX_VOLTAGE_SWING_B
TMDSA_TXPCA
TMDSA_TXPCB
TMDSA_TXPWA
TMDSA_TXPWB
TMDSA_TX_VS_COMPA
Bits
3:0
7:4
9:8
13:12
17:16
21:20
25:24
Default
0xa
0xa
0x0
0x0
0x0
0x0
0x0
TMDSA_TX_VS_COMPB
29:28
0x0
Description
tmds macro transmitter A, voltage swing control
tmds macro transmitter B, voltage swing control
tmds macro transmitter A, pulse current control
tmds macro transmitter B, pulse current control
tmds macro transmitter A, pulse width control
tmds macro transmitter A, pulse width control
tmds macro transmitter A, voltage swing compensation
control
tmds macro transmitter B, voltage swing compensation
control
TMDSA_REG_TEST_OUTPUTB - RW - 32 bits - [GpuF0MMReg:0x7924]
Field Name
TMDSA_REG_TEST_OUTPUTB (R)
TMDSA_TEST_CNTLB
Bits
9:0
Default
0x0
17:16
0x0
Description
Outputs of the 10 shift registers (OTDATX[9:0]) from one of
the channels during test mode.
Selects which of 3 register test output channels from
TMDSA macro is visible in
TMDSA_REG_TEST_OUTPUTB.
0=OTDATB0
1=OTDATB1
2=OTDATB2
3=N/A
Digital Video Output (DVO) Registers
DVOA_ENABLE - RW - 32 bits - [GpuF0MMReg:0x7980]
Field Name
DVOA_ENABLE
Bits
0
Default
0x0
DVOA_PIXEL_ENCODING
8
0x0
Description
Enable for DVO
0=Disable
1=Enable
Selects pixel encoding format
0=RGB 4:4:4 or YCBCR 4:4:4
1=YCbCr 4:2:2
DVOA_SOURCE_SELECT - RW - 32 bits - [GpuF0MMReg:0x7984]
Field Name
DVOA_SOURCE_SELECT
Bits
0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-312
Description
Select between 1st and 2nd display streams
0=CRTC1 data is used
1=CRTC2 data is used
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DVOA_SYNC_SELECT
8
0x0
DVOA_STEREOSYNC_SELECT
16
0x0
Source Select control for Data, H/VSYNC & Stereosync
Select between SYNCA and SYNCB signals from CRTC
0=HSYNC_A & VSYNC_A from the selected CRTC are
used
1=HSYNC_B & VSYNC_B from the selected CRTC are
used
Select between CRTC1 and CRTC2 stereosync signals
0=DVOA Stereosync from CRTC1 used
1=DVOA Stereosync from CRTC2 used
DVOA_BIT_DEPTH_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7988]
Field Name
DVOA_TRUNCATE_EN
Description
Enable bit reduction by truncation
0=Disable
1=Enable
DVOA_TRUNCATE_DEPTH
4
0x0
Select truncation depth
0=18bpp
1=24bpp
DVOA_SPATIAL_DITHER_EN
8
0x0
Enable bit reduction by spatial (random) dither
0=Disable
1=Enable
DVOA_SPATIAL_DITHER_MODE
10:9
0x0
LFSR seed selection. 0: Seed pattern A(a,a), 1: seed
pattern A(a, ~a), 2: seed pattern AABB(a, ~a, b, ~b), 3:
seed pattern AABBCC(a, ~a, b, ~b, c, ~c)
DVOA_SPATIAL_DITHER_DEPTH
12
0x0
Select spatial dither depth
0=18bpp
1=24bpp
DVOA_FRAME_RANDOM_ENABLE
13
0x0
Control the LFSR reset, every frame or once at startup
0=0: RGB LFSR are reset every frame, 1: reset once at
startup/no reset on every frame
DVOA_RGB_RANDOM_ENABLE
14
0x0
Control the pseudo-random number to be dithered on RGB
0=0: RGB use x^28+x^3+1 random number
1=1: R dithered with x^28+x^3+1, G dithered with
x^28+x^9+1 and B dithered with x^28+x^13+1
DVOA_HIGHPASS_RANDOM_ENABLE
15
0x0
Highpass filter on RGB dithered channels
0=0: highpass filter is disable, 1: highpass filter is enable
on RGB
DVOA_TEMPORAL_DITHER_EN
16
0x0
Enable bit reduction by temporal dither (frame mod.)
0=Disable
1=Enable
DVOA_TEMPORAL_DITHER_DEPTH
20
0x0
Select temporal dither depth
0=18bpp
1=24bpp
DVOA_TEMPORAL_DITHER_OFFSET
22:21
0x0
Add offset to RGB channel before temporal dithering
operation
0=For 24bpp: add offset[1:0] to RGB channels
1=For 18bpp: Add offset[1:0]x4 to RGB channels
DVOA_TEMPORAL_LEVEL
24
0x0
Gray level select (2 or 4 levels)
0=Gray level 2
1=Gray level 4
DVOA_TEMPORAL_DITHER_RESET
25
0x0
Reset temporal dither (frame modulation)
0=Temporal Dither Ready
1=Reset Temporal Dither Circuit
Control the method in which the data input into the DVO block is reduced and the length it is reduced to.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-313
Display Output Registers
DVOA_OUTPUT - RW - 32 bits - [GpuF0MMReg:0x798C]
Field Name
DVOA_OUTPUT_ENABLE_MODE
DVOA_CLOCK_MODE
Bits
1:0
Default
0x0
8
0x0
Description
Ouput mode for DVO
0=disabled
1=lower 12 output en
2=upper 12 output en
3=all 24 output enable
Reserved
0=differential clocking enabled
1=single ended clocking enabled
Output enable control for DVO pads.
DVOA_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7990]
Field Name
DVOA_RATE_SELECT
Bits
0
Default
0x0
DVOA_SDRCLK_SEL
1
0x0
DVOA_DUAL_CHANNEL_EN
8
0x0
DVOA_RESET_FIFO (W)
DVOA_SYNC_PHASE
16
17
0x0
0x1
DVOA_INVERT_DVOCLK
18
0x0
DVOA_COLOR_FORMAT
25:24
0x0
DVOA_REORDER_BITS
28
0x0
Description
Select between DDR and SDR modes
0=DDR Speed
1=SDR Speed using NPL A pin
Select SDR DVOCLK using clk from A pin or CLK0 pin in
NPL
0=use NPL A input clock
1=use CLK0 input clock
Enable Dual Channel DVO Mode
0=Disable
1=Enable
Write 1 to force reset of DVO mesochronous fifo
Determine whether to reset phase signal on frame pulse
0=Disable
1=Enable
Set to 1 to invert 'clock' going to d input of dvoclk pad
0=Don't Invert
1=Invert
0=8-bit DVO display
1=Twin Single Link 10-bit mode
2=Dual-Link 10-bit mode
3=Reserved
Reorder DVO bits output = input 1:0, input 7:2
0=Disable
1=Enable
DVOA_CRC_EN - RW - 32 bits - [GpuF0MMReg:0x7994]
Field Name
DVOA_CRC_EN
Bits
0
Default
0x0
DVOA_CRC_CONT_EN
8
0x0
DVOA_CRC2_EN
16
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-314
Description
Enable DVO CRC
0=Disable
1=Enable
Select between one shot and continous mode
0=CRC is calculated over 1 frame
1=CRC is continuously calculated for every frame
Enable DVO output CRC2
0=Disable
1=Enable
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DVOA_CRC_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7998]
Field Name
DVOA_CRC_FIELD
DVOA_CRC_ONLY_BLANKb
Bits
0
Default
0x0
8
0x0
Description
Controls which field polarity starts the DVO CRC block after
DAC_CRC_EN is set high
0=Even field begins CRC calculation
1=Odd field begins CRC calculation
Determines whether CRC is calculated for the whole frame
or only during non-blank period for DVO
0=CRC calculated over entire field
1=CRC calculated only during BLANKb
DVOA_CRC_SIG_MASK1 - RW - 32 bits - [GpuF0MMReg:0x799C]
Field Name
Bits
Default
DVOA_CRC_SIG_BLUE_MASK
7:0
0xff
DVOA_CRC_SIG_GREEN_MASK
23:16
0xff
Select which data the CRC calculation is performed on.
Description
Mask bits for DVO B channel CRC.
Mask bits for DVO G channel CRC.
DVOA_CRC_SIG_MASK2 - RW - 32 bits - [GpuF0MMReg:0x79A0]
Field Name
DVOA_CRC_SIG_RED_MASK
DVOA_CRC_SIG_CONTROL_MASK
Bits
7:0
18:16
Default
0xff
0x7
Description
Mask bits for DVO R channel CRC.
Mask bits for DVO control signal CRC
Bit 18: Vsync signal
Bit 17: Hsync Signal
Bit 16: Data Enable
Select which control signals the CRC calculation is performed on.
DVOA_CRC_SIG_RESULT1 - RW - 32 bits - [GpuF0MMReg:0x79A4]
Field Name
DVOA_CRC_SIG_BLUE (R)
DVOA_CRC_SIG_GREEN (R)
DVOA Data CRC Results
Bits
7:0
23:16
Default
0x0
0x0
Description
CRC signature value for DVO B channel CRC.
CRC signature value for DVO G channel CRC.
DVOA_CRC_SIG_RESULT2 - RW - 32 bits - [GpuF0MMReg:0x79A8]
Field Name
DVOA_CRC_SIG_RED (R)
DVOA_CRC_SIG_CONTROL (R)
DVOA DATA and Control CRC Results
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
7:0
18:16
Default
0x0
0x0
Description
CRC signature value for DVO R channel CRC.
CRC signature value for DVO control CRC.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-315
Display Output Registers
DVOA_CRC2_SIG_MASK - RW - 32 bits - [GpuF0MMReg:0x79AC]
Field Name
DVOA_CRC2_SIG_MASK
Bits
26:0
Default
0x7ffffff
Description
Mask bits for DVO output CRC2
Bit 26: Vsync signal
Bit 25: Hsync Signal
Bit 24: Data Enable
Bit 23-0:DVO Data
Control for secondary DVO CRC
DVOA_CRC2_SIG_RESULT - RW - 32 bits - [GpuF0MMReg:0x79B0]
Field Name
DVOA_CRC2_SIG_RESULT (R)
CRC2 signature value for DVO output
Bits
26:0
Default
0x0
Description
CRC2 signature value for DVO output
DVOA_STRENGTH_CONTROL - RW - 32 bits - [GpuF0MMReg:0x79B4]
Bits
3:0
7:4
Default
0x0
0x6
DVOACLK_SP
11:8
0x0
DVOACLK_SN
15:12
0x6
DVOA_SRP
16
0x1
DVOA_SRN
17
0x1
DVOACLK_SRP
24
0x1
DVOACLK_SRN
25
0x1
DVOA_LSB_VMODE
28
0x1
DVOA_MSB_VMODE
29
0x1
DVOA_SP
DVOA_SN
Field Name
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-316
Description
Strength of pull-up section of output buffer for DVO signals.
Strength of pull-down section of output buffer for DVO
signals.
Strength of pull-up section of output buffer for DVO clock
output.
Strength of pull-down section of output buffer for DVO clock
output.
Increases slew rate to pull-up section of output buffer for
DVO signals.
Increases slew rate to pull-down section of output buffer for
DVO signals.
Increases slew rate to pull-up section of output buffer for
DVO clock.
Increases slew rate to pull-down section of output buffer for
DVO clock.
This pin controls the DVO I/O pad's internal level shifter
voltage
Should be set based on pad output voltage (determined by
board voltage regulator)
This field controls DVODATA[11:0], DVOCNTL and
DVOCLK
Sense is inverted for BIF debug
0: 1.8V
1: 3.3V
This pin controls the DVO I/O pad's internal level shifter
voltage
Should be set based on pad output voltage (determined by
board voltage regulator)
This field controls DVODATA[23:12], MVP_DVOCNTL[1:0]
Sense is inverted for BIF debug
0: 1.8V
1: 3.3V
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DVOA_FORCE_OUTPUT_CNTL - RW - 32 bits - [GpuF0MMReg:0x79B8]
Field Name
DVOA_FORCE_DATA_EN
Bits
0
Default
0x0
DVOA_FORCE_DATA_SEL
10:8
0x0
DVOA_FORCE_DATA_ON_BLANKb_ON
LY
16
0x0
DVOA_HDCP_RGB_PASSTHRU_IN_NO
NEACTIVE
20
0x0
DVOA_HDCP_RANDOM_DATA_EN
21
0x0
DVOA Force Data control register
Description
Enable force option on DVOA
0=Disable
1=Enable
Select which DVOA channels have data forced0=Don't
Force, 1=Force
Bit 0: Blue channel
Bit 1: Green channel
Bit 2: Red channel
Data is forced only during active region.
0=Disable
1=Enable
Enable the DVO to let RGB data pass thru in non active
data zone when encryption is enable, otherwise RGB data
are zero in non active area
Enable random data generation (snow) when encryption is
required and cipher is not valid.
DVOA_FORCE_DATA - RW - 32 bits - [GpuF0MMReg:0x79BC]
Field Name
DVOA_FORCE_DATA
Data to be forced on R, G & B channels
Bits
7:0
Default
0x0
Description
Data to be forced on R, G & B channels
Hot Plug Detection Registers
DC_HOT_PLUG_DETECT1_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D00]
Field Name
DC_HOT_PLUG_DETECT1_EN
Bits
0
Default
0x0
Description
Enable 1st HPD circuit
When disabled, HPD interrupts will not happen and
DC_HOT_PLUG_DETECT1_SENSE will not change
0=Disable
1=Enable
DC_HOT_PLUG_DETECT1_INT_STATUS - RW - 32 bits - [GpuF0MMReg:0x7D04]
Field Name
DC_HOT_PLUG_DETECT1_INT_STATU
S (R)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
Description
Interrupt generated by 1st HPD circuit - connect or
disconnect has taken place
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-317
Display Output Registers
DC_HOT_PLUG_DETECT1_SENSE (R)
1
0x0
Connection status of panel being monitored by the 1st HPD
circuit
0=nothing connected to HPD1
1=panel connected to HPD1
DC_HOT_PLUG_DETECT1_INT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D08]
Field Name
DC_HOT_PLUG_DETECT1_INT_ACK
(W)
DC_HOT_PLUG_DETECT1_INT_POLAR
ITY
DC_HOT_PLUG_DETECT1_INT_EN
Bits
0
Default
0x0
8
0x0
16
0x0
Description
Interrupt acknowledge for the 1st HPD circuit
Polarity of 1st HPD circuit
0=generate interrupt on disconnect
1=generate interrupt on connect
Enable Interrupts on the 1st HPD circuit
0=Disable
1=Enable
DC_HOT_PLUG_DETECT2_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D10]
Field Name
DC_HOT_PLUG_DETECT2_EN
Bits
0
Default
0x0
Description
Enable 2nd HPD circuit
When disabled, HPD interrupts will not happen and
DC_HOT_PLUG_DETECT2_SENSE will not change
0=Disable
1=Enable
DC_HOT_PLUG_DETECT2_INT_STATUS - RW - 32 bits - [GpuF0MMReg:0x7D14]
Field Name
DC_HOT_PLUG_DETECT2_INT_STATU
S (R)
DC_HOT_PLUG_DETECT2_SENSE (R)
Bits
0
Default
0x0
1
0x0
Description
Interrupt generated by 2nd HPD circuit - connect or
disconnect has taken place
Connection status of panel being monitored by the 2nd
HPD circuit
0=nothing connected to HPD2
1=panel connected to HPD2
DC_HOT_PLUG_DETECT2_INT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D18]
Field Name
DC_HOT_PLUG_DETECT2_INT_ACK
(W)
DC_HOT_PLUG_DETECT2_INT_POLAR
ITY
Bits
0
Default
0x0
8
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-318
Description
Interrupt acknowledge for the 2nd HPD circuit
Polarity of 2nd HPD circuit.
0=generate interrupt on disconnect
1=generate interrupt on connect
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DC_HOT_PLUG_DETECT2_INT_EN
16
0x0
Enable Interrupts on the 2nd HPD circuit
0=Disable
1=Enable
DC_HOT_PLUG_DETECT_CLOCK_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D20]
Field Name
DC_HOT_PLUG_DETECT_CLOCK_ENA
BLE
Bits
0
Default
0x1
DC_HOT_PLUG_DETECT_CLOCK_SEL
17:16
0x0
Description
Enable HPD clock
0=Disable
1=Enable
Select HPD reference frequency
0=Period = 8192 us
1=512 us
2=32 us
3=2 us
DC_HOT_PLUG_DETECT3_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D24]
Field Name
DC_HOT_PLUG_DETECT3_EN
Bits
0
Default
0x0
0=Disable
1=Enable
Description
DC_HOT_PLUG_DETECT3_INT_STATUS - RW - 32 bits - [GpuF0MMReg:0x7D28]
Field Name
DC_HOT_PLUG_DETECT3_INT_STATU
S (R)
DC_HOT_PLUG_DETECT3_SENSE (R)
Bits
0
Default
0x0
1
0x0
Description
0=nothing connected to HPD3
1=panel connected to HPD3
DC_HOT_PLUG_DETECT3_INT_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7D2C]
Field Name
DC_HOT_PLUG_DETECT3_INT_ACK
(W)
DC_HOT_PLUG_DETECT3_INT_POLAR
ITY
DC_HOT_PLUG_DETECT3_INT_EN
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
8
0x0
16
0x0
Description
0=generate interrupt on disconnect
1=generate interrupt on connect
0=Disable
1=Enable
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-319
Display Output Registers
2.9.2
Display Output Control Registers
Registers for controlling general DISPOUT functionality
DC_GENERICA - RW - 32 bits - [GpuF0MMReg:0x7DC0]
Field Name
GENERICA_EN
GENERICA_SEL
Bits
0
11:8
Default
0x0
0x0
Description
Enable signal for GENERICA pad
Select signals for GENERICA pad
0=DACA Stereosync
1=DACB Stereosync
2=DACA Pixclk
3=DACB Pixclk
4=DVOA CTL3
5=P1 PLLCLK
6=P2 PLLCLK
7=DVOA Stereosync
8=DACA Field Number
9=DACB Field Number
10=GENERICA test debug clock from DCCG
11=SYNCEN
12=GENERICA test debug clock from SCG
13=Reserved
14=Reserved
15=Reserved
DC_GENERICB - RW - 32 bits - [GpuF0MMReg:0x7DC4]
Field Name
GENERICB_EN
GENERICB_SEL
Bits
0
11:8
Default
0x0
0x0
Description
Enable signals for GENERICB pad
Select signal for GENERICB pad
0=DACA Stereosync
1=DACB Stereosync
2=DACA PIXCLK
3=DACB PIXCLK
4=DVOA CTL3
5=P1 PLLCLK
6=P2 PLLCLK
7=DVOA Stereosync
8=DACA Field Number
9=DACB Field Number
10=GENERICB test debug clock from DCCG
11=SYNCEN
12=GENERICA test debug clock from SCG
13=Reserved
14=Reserved
15=Reserved
DC_PAD_EXTERN_SIG - RW - 32 bits - [GpuF0MMReg:0x7DCC]
Field Name
Bits
Default
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-320
Description
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DC_PAD_EXTERN_SIG_SEL
3:0
0x0
10=PAD_EXTERN_SIGNAL is connected to DDC1DATA
pin
11=PAD_EXTERN_SIGNAL is connected to DDC2CLK
pin
12=PAD_EXTERN_SIGNAL is connected to DDC2DATA
pin
13=PAD_EXTERN_SIGNAL is connected to VHAD(1) pin
14=PAD_EXTERN_SIGNAL is connected to VHAD(0) pin
15=PAD_EXTERN_SIGNAL is connected to VPHCTL pin
Select for PAD_EXTERN_SIGNAL
Field Name
HSYNCA_OUTPUT_SEL
Select pin PAD_EXTERN_SIGNAL is connected to
0=PAD_EXTERN_SIGNAL is connected to HSYNCA pin
1=PAD_EXTERN_SIGNAL is connected to VSYNCA pin
2=PAD_EXTERN_SIGNAL is connected to HSYNCB pin
3=PAD_EXTERN_SIGNAL is connected to VSYNCB pin
4=PAD_EXTERN_SIGNAL is connected to GENERICA
pin
5=PAD_EXTERN_SIGNAL is connected to GENERICB
pin
6=PAD_EXTERN_SIGNAL is connected to GENERICC
pin
7=PAD_EXTERN_SIGNAL is connected to HPD1 pin
8=PAD_EXTERN_SIGNAL is connected to HPD2 pin
9=PAD_EXTERN_SIGNAL is connected to DDC1CLK pin
DC_REF_CLK_CNTL - RW - 32 bits - [GpuF0MMReg:0x7DD4]
HSYNCB_OUTPUT_SEL
Bits
1:0
Default
0x0
9:8
0x0
Control output of external reference clocks
Description
0=Reference Clock Output disabled
1=PPLL1 Reference Clock Output
2=PPLL2 Reference Clock Output
3=Reserved
0=Reference Clock Output disabled
1=PPLL1 Reference Clock Output
2=PPLL2 Reference Clock Output
3=Reserved
DISP_INTERRUPT_STATUS - RW - 32 bits - [GpuF0MMReg:0x7EDC]
Field Name
SCL_DISP1_MODE_CHANGE_INTERRU
PT (R)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
Description
Interrupt that can be generated by the primary display
controller's scaler when it detects any change in the scale
ratio or number of taps the scaling filter is using. In
automatic mode, the scale ratio can change whenever the
source size (i.e. viewport) changes or the destination size
(i.e. active display of the CRTC output timing).
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-321
Display Output Registers
SCL_DISP2_MODE_CHANGE_INTERRU
PT (R)
1
0x0
LB_D1_VLINE_INTERRUPT (R)
2
0x0
LB_D2_VLINE_INTERRUPT (R)
3
0x0
LB_D1_VBLANK_INTERRUPT (R)
4
0x0
LB_D2_VBLANK_INTERRUPT (R)
5
0x0
CRTC1_SNAPSHOT_INTERRUPT (R)
6
0x0
CRTC1_FORCE_VSYNC_NEXT_LINE_I
NTERRUPT (R)
7
0x0
CRTC1_FORCE_COUNT_NOW_INTERR
UPT (R)
8
0x0
CRTC1_TRIGA_INTERRUPT (R)
9
0x0
CRTC1_TRIGB_INTERRUPT (R)
10
0x0
CRTC2_SNAPSHOT_INTERRUPT (R)
11
0x0
CRTC2_FORCE_VSYNC_NEXT_LINE_I
NTERRUPT (R)
12
0x0
CRTC2_FORCE_COUNT_NOW_INTERR
UPT (R)
13
0x0
CRTC2_TRIGA_INTERRUPT (R)
14
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-322
Interrupt that can be generated by the secondary display
controller's scaler when it detects any change in the scale
ratio or number of taps the scaling filter is using. In
automatic mode, the scale ratio can change whenever the
source size (i.e. viewport) changes or the destination size
(i.e. active display of the CRTC output timing).
Interrupt that can be generated by the primary display
controller's line buffer logic when the source image line
counter falls within a programmed range of line numbers.
Interrupt that can be generated by the secondary display
controller's line buffer logic when the source image line
counter falls within a programmed range of line numbers.
Interrupt that can be programmed to be generated by the
primary display controller's line buffer logic either when the
source image line counter is not requesting any active
display data (i.e. in the vertical blank) or the output CRTC
timing generator is within the vertical blanking region.
Interrupt that can be programmed to be generated by the
secondary display controller's line buffer logic either when
the source image line counter is not requesting any active
display data (i.e. in the vertical blank) or the output CRTC
timing generator is within the vertical blanking region.
Interrupt that can be programmed to be generated by the
primary display controller's snapshot logic when either
manually forced to trigger by writing a register, or by either a
primary CRTC TRIG_A or TRIG_B event occurring.
Interrupt that can be programmed to be generated by the
primary display controller's force VSYNC next line logic
when a force VSYNC next line event occurs, caused by
either manually writing a register, or by either a primary
CRTC TRIG_A or TRIG_B event occurring.
Interrupt that can be programmed to be generated by the
primary display controller's force count now logic when
either a primary CRTC TRIG_A or TRIG_B event occur and
the horizontal and/or vertical primary CRTC output timing
counters reach the H_TOTAL and/or V_TOTAL position
selected by the D1CRTC_FORCE_COUNT_NOW_MODE.
Interrupt that can be generated by the primary display
controller when it detects a primary TRIGA event has
occurred.
Interrupt that can be generated by the primary display
controller when it detects a primary TRIGB event has
occurred.
Interrupt that can be programmed to be generated by the
secondary display controller's snapshot logic when either
manually forced to trigger by writing a register, or by either a
CRTC TRIG_A or TRIG_B event from the secondary
display controller occurring.
Interrupt that can be programmed to be generated by the
secondary display controller's force VSYNC next line logic
when a force VSYNC next line event occurs, caused by
either manually writing a register, or by either a secondary
CRTC TRIG_A or TRIG_B event occurring.
Interrupt that can be programmed to be generated by the
secondary display controller's force count now logic when
either a primary CRTC TRIG_A or TRIG_B event occur and
the horizontal and/or vertical secondary CRTC output timing
counters reach the H_TOTAL and/or V_TOTAL position
selected by the D2CRTC_FORCE_COUNT_NOW_MODE.
Interrupt that can be generated by the secondary display
controller when it detects a secondary TRIGA event has
occurred.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
CRTC2_TRIGB_INTERRUPT (R)
15
0x0
DACA_AUTODETECT_INTERRUPT (R)
16
0x0
DACB_AUTODETECT_INTERRUPT (R)
17
0x0
DC_HOT_PLUG_DETECT1_INTERRUPT
(R)
18
0x0
DC_HOT_PLUG_DETECT2_INTERRUPT
(R)
19
0x0
DC_I2C_SW_DONE_INTERRUPT (R)
20
0x0
DC_I2C_HW_DONE_INTERRUPT (R)
21
0x0
DISP_TIMER_INTERRUPT (R)
22
0x0
DACA_CAPTURE_START_INTERRUPT
(R)
DACB_CAPTURE_START_INTERRUPT
(R)
TMDSA_CAPTURE_START_INTERRUP
T (R)
TMDS2A_CAPTURE_START_INTERRU
PT (R)
DVOA_CAPTURE_START_INTERRUPT
(R)
DISP_INTERRUPT_STATUS_CONTINU
E (R)
Status of all display block interrupts
23
0x0
24
0x0
25
0x0
26
0x0
27
0x0
31
0x0
Interrupt that can be generated by the secondary display
controller when it detects a secondary TRIGB event has
occurred.
Interrupt that can be programmed to be generated when the
Autodetect device connected to DACA output detects either
a display being first connected or, once connected, first
detects the display being disconnected.
Interrupt that can be programmed to be generated when the
Autodetect device connected to DACA output detects either
a display being first connected or, once connected, first
detects the display being disconnected.
Interrupt that can be programmed to be generated when a
Flat Panel (supporting the hot plug feature) is detected to
be first connected to the HPD1 pin or, once connected, is
detected to have disconnected from the HPD1 pin.
Interrupt that can be programmed to be generated when a
Flat Panel (supporting the hot plug feature) is detected to
be first connected to the HPD2 pin or, once connected, is
detected to have disconnected from the HPD2 pin.
Interrupt that can be generated when the current I2C read
or write operation done by the DISPOUT hardware assisted
I2C finished execution.
Interrupt that can be generated when the current I2C read
or write operation done by the DISPOUT hardware assisted
I2C finishes execution.
Interrupt that can be generated when the display Timer
Control logic has generated a hardware interrupt.
Interrupt that can be generated each time a start of frame
pulse arrives at the DACA output.
Interrupt that can be generated each time a start of frame
pulse arrives at the DACB output.
Interrupt that can be generated each time a start of frame
pulse arrives at the integrated TMDS transmitter output.
Interrupt that can be generated each time a start of frame
pulse arrives at the integrated TMDS2 transmitter output.
Interrupt that can be generated each time a start of frame
pulse arrives at the DVOA port.
when this bit is set, continue reading
DISP_INTERRUPT_STATUS_CONTINUE
DISP_INTERRUPT_STATUS_CONTINUE - RW - 32 bits - [GpuF0MMReg:0x7EE8]
Field Name
D1MODE_DATA_UNDERFLOW_INTERR
UPT (R)
D1MODE_REQUEST_UNDERFLOW_IN
TERRUPT (R)
D1SCL_DATA_UNDERFLOW_INTERRU
PT (R)
D1SCL_HOST_CONFLICT_INTERRUPT
(R)
D2MODE_DATA_UNDERFLOW_INTERR
UPT (R)
D2MODE_REQUEST_UNDERFLOW_IN
TERRUPT (R)
D2SCL_DATA_UNDERFLOW_INTERRU
PT (R)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
16
Default
0x0
Description
Debug interrupt for Display 1 Line Buffer data underflow
17
0x0
Debug interrupt for Display 1 Line Buffer request underflow
18
0x0
Debug interrupt for Display 1 Scaler data underflow
19
0x0
Debug interrupt for Display 1 Scaler host conflict
20
0x0
Debug interrupt for Display 2 Line Buffer data underflow
21
0x0
Debug interrupt for Display 2 Line Buffer request underflow
22
0x0
Debug interrupt for Display 2 Scaler data underflow
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-323
Display Output Registers
D2SCL_HOST_CONFLICT_INTERRUPT
(R)
MVP_FIFO_ERROR_INTERRUPT (R)
23
0x0
Debug interrupt for Display 2 Scaler host conflict
24
0x0
HDMI0_ERROR_INTERRUPT (R)
26
0x0
HDMI1_ERROR_INTERRUPT (R)
27
0x0
Debug interrupt for multi-vpu fifo error (underflow or
overflow)
Debug interrupt for HDMI0 error (audio fifo overflow, acr tx
overflow, audio packet error or vbi packet error)
Debug interrupt for HDMI1 error (audio fifo overflow, acr tx
overflow, audio packet error or vbi packet error)
Status of all display block interrupts
DOUT_POWER_MANAGEMENT_CNTL - RW - 32 bits - [GpuF0MMReg:0x7EE0]
Field Name
PWRDN_WAIT_BUSY_OFF
Bits
0
Default
0x1
PWRDN_WAIT_PWRSEQ_OFF
4
0x1
PWRDN_WAIT_PPLL_OFF
8
0x0
PWRUP_WAIT_PPLL_ON
12
0x0
PWRUP_WAIT_MEM_INIT_DONE
16
0x1
PM_ASSERT_RESET
20
0x1
PM_PWRDN_PPLL
24
0x0
30:28
0x0
PM_CURRENT_STATE (R)
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-324
Description
Control whether power management waits for signal
indicating all block busy signals =0 from DCCG during
powerdown
0=When in WAIT_BUSY_OFF, don't wait for all busy=0
1=When in WAIT_BUSY_OFF, wait for all busy=0
Control whether power management waits for signal
indicating power sequencer is off during powerdown
0=When in WAIT_BUSY_OFF, don't wait for pwrseq off
1=When in WAIT_BUSY_OFF, wait pwrseq off
Control whether power management waits for DCCG to
report pixel PLLs are off during powerdown
0=When in WAIT_PPLL_OFF, proceed to next state
1=When in WAIT_PPLL_OFF, wait for pixel pll off
indicator
Control whether power management waits for 1 ms to allow
pixel PLLs to lock during powerup
0=When in WAIT_PPLL_ON, proceed to next state
1=When in WAIT_PPLL_ON, wait for 1 ms proceeding to
next state
Control whether power management mem_init_done
indicator
0=When in WAIT_MEM_INIT_DONE, proceed to next
state
1=When in WAIT_MEM_INIT_DONE, wait for
mem_init_done indicator
Control whether power management asserts
DOUT_CRTC_pwr_down_reset on powerdown
0=Don't assert pm_reset when in 'OFF' state
1=Assert pm_reset when in 'OFF' state
Control whether power management asserts pixel PLL
reset on powerdown
0=Don't reset pixel PLLs when in 'OFF' state
1=Reset pixel PLLs when in 'OFF' state
Current power management state
0=PM_OFF
1=PM_WAIT_PPLL_ON
2=PM_WAIT_MEM_INIT_DONE
3=PM_ON
4=PM_WAIT_BUSY_OFF
5=PM_WAIT_PPLL_OFF
6=Reserved
7=Reserved
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DISP_TIMER_CONTROL - RW - 32 bits - [GpuF0MMReg:0x7EF0]
Field Name
DISP_TIMER_INT_COUNT
Bits
24:0
Default
0x0
Description
Desired value for Display Timer Counter to count to before
generating event that can cause a hardware interrupt to
occur. The counter value is decremented each clock pulse
of the CG_xtal_ref_sclk signal. CG_xtal_ref_sclk = a one
clock wide pulse on core clock (SCLK) that occurs (Crystal
Oscillator Frequency (i.e. 27 MHz)) / (CG_RT_CNTL2_DIV)
times per second.
DISP_TIMER_INT_ENABLE (W)
25
0x0
0=No effect
1=Start timer interrupt if TIMER_INT_CNT > 0.
DISP_TIMER_INT_RUNNING (R)
26
0x0
0=Timer interrupt counter not running
1=Timer interrupt counter running
DISP_TIMER_INT_MSK
27
0x0
0=Display Countdown Timer cannot generate hardware
interrupt.
1=Display Countdown Timer can generate hardware
interrupt when count reached.
DISP_TIMER_INT_STAT (R)
28
0x0
Status of the Display Timer Counter logic. When this bit is
high, it does not indicate that a hardware interrupt has
occurred.
DISP_TIMER_INT_STAT_AK (W)
29
0x0
Write 1 to acknowledge and clear interrupt
0=No effect
1=Interrupt Acknowledged and will be cleared.
DISP_TIMER_INT (R)
30
0x0
When this bit is high, it indicates that the Display Timer
Control logic has generated a hardware interrupt. This bit
equals the display timer status (DISP_TIMER_INT_STAT)
logically 'AND'ed with the display timer interrupt mask
(DISP_TIMER_INT_MSK).
Display Countdown Timer capable of generating a hardware interrupt
CAPTURE_START_STATUS - RW - 32 bits - [GpuF0MMReg:0x7ED0]
Field Name
DACA_CAPTURE_START (R)
Bits
0
Default
0x0
DACB_CAPTURE_START (R)
1
0x0
TMDSA_CAPTURE_START (R)
2
0x0
TMDS2A_CAPTURE_START (R)
3
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Extended DACA Capture Start that is used for test & debug
purposes. This Capture Start is de-asserted by
DACA_CAPTURE_START_AK.
0=No event
1=Capture_start has occurred
Extended DACB Capture Start that is used for test & debug
purposes. This Capture Start is de-asserted by
DACB_CAPTURE_START_AK.
0=No event
1=Capture_start has occurred
Extended TMDSA Capture Start that is used for test &
debug purposes. This Capture Start is de-asserted by
TMDSA_CAPTURE_START_AK.
0=No event
1=Capture_start has occurred
0=No event
1=Capture_start has occurred
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-325
Display Output Registers
DVOA_CAPTURE_START (R)
4
0x0
DACA_CAPTURE_START_AK (W)
6
0x0
DACB_CAPTURE_START_AK (W)
7
0x0
TMDSA_CAPTURE_START_AK (W)
8
0x0
TMDS2A_CAPTURE_START_AK (W)
9
0x0
DVOA_CAPTURE_START_AK (W)
10
0x0
DACA_CAPTURE_START_INT_EN
12
0x0
DACB_CAPTURE_START_INT_EN
13
0x0
TMDSA_CAPTURE_START_INT_EN
14
0x0
TMDS2A_CAPTURE_START_INT_EN
15
0x0
DVOA_CAPTURE_START_INT_EN
16
0x0
Capture Start Control
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-326
Extended DVOA Capture Start that is used for test & debug
purposes. This Capture Start is de-asserted by
DVOA_CAPTURE_START_AK.
0=No event
1=Capture_start has occurred
Acknowledge bit for DACA Capture Start. This bit will clear
DACA_CAPTURE_START and
DISP_INTERRUPT_STATUS_x.DACA_CAPTURE_STAR
T_INTERRUPT.
0=No effect
1=Clear Capture_start
Acknowledge bit for DACB Capture Start. This bit will clear
DACB_CAPTURE_START and
DISP_INTERRUPT_STATUS_x.DACB_CAPTURE_STAR
T_INTERRUPT.
0=No effect
1=Clear Capture_start
Acknowledge bit for TMDSA Capture Start. This bit will
clear TMDSA_CAPTURE_START and
DISP_INTERRUPT_STATUS_x.TMDSA_CAPTURE_STA
RT_INTERRUPT.
0=No effect
1=Clear Capture_start
0=No effect
1=Clear Capture_start
Acknowledge bit for DVOA Capture Start. This bit will clear
DVOA_CAPTURE_START and
DISP_INTERRUPT_STATUS_x.DVOA_CAPTURE_STAR
T_INTERRUPT.
0=No effect
1=Clear Capture_start
Enable interrupts on DACA Capture Start. Interrupt can be
monitored by polling
DISP_INTERRUPT_STATUS_x.DACA_CAPTURE_STAR
T_INTERRUPT.
0=Disable
1=Enable
Enable interrupts on DACB Capture Start. Interrupt can be
monitored by polling
DISP_INTERRUPT_STATUS_x.DACB_CAPTURE_STAR
T_INTERRUPT.
0=Disable
1=Enable
Enable interrupts on TMDSA Capture Start. Interrupt can
be monitored by polling
DISP_INTERRUPT_STATUS_x.TMDSA_CAPTURE_STA
RT_INTERRUPT.
0=Disable
1=Enable
0=Disable
1=Enable
Enable interrupts on DVOA Capture Start. Interrupt can be
monitored by polling
DISP_INTERRUPT_STATUS_x.DVOA_CAPTURE_STAR
T_INTERRUPT.
0=Disable
1=Enable
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
General Purpose I/O Registers
DC_GPIO_GENERIC_MASK - RW - 32 bits - [GpuF0MMReg:0x7DE0]
Field Name
DC_GPIO_GENERICA_MASK
Bits
0
Default
0x0
DC_GPIO_GENERICB_MASK
8
0x0
DC_GPIO_GENERICC_MASK
16
0x0
Description
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
Control GPIO functionality of GENERIC pads - active high.
DC_GPIO_GENERIC_A - RW - 32 bits - [GpuF0MMReg:0x7DE4]
Field Name
DC_GPIO_GENERICA_A
Bits
0
Default
0x0
Description
Asynchronous input for GENERICA pad when
DC_GPIO_GENERICA_MASK = 1.
DC_GPIO_GENERICB_A
8
0x0
Asynchronous input for GENERICB pad when
DC_GPIO_GENERICB_MASK = 1.
DC_GPIO_GENERICC_A
16
0x0
Asynchronous input for GENERICC pad when
DC_GPIO_GENERICC_MASK = 1.
Asynchronous inputs for GENERIC pads when GPIO functionality enabled by DC_GPIO_GENERIC_MASK register.
DC_GPIO_GENERIC_EN - RW - 32 bits - [GpuF0MMReg:0x7DE8]
Field Name
DC_GPIO_GENERICA_EN
Bits
0
Default
0x0
Description
Output enable used for GENERICA when
DC_GPIO_GENERICA_MASK = 1.
DC_GPIO_GENERICB_EN
8
0x0
Output enable used for GENERICB when
DC_GPIO_GENERICB_MASK = 1.
DC_GPIO_GENERICC_EN
16
0x0
Output enable used for GENERICC when
DC_GPIO_GENERICC_MASK = 1.
Ouput enable for GENERIC pads when GPIO functionality enabled by DC_GPIO_GENERIC_MASK register.
DC_GPIO_GENERIC_Y - RW - 32 bits - [GpuF0MMReg:0x7DEC]
Field Name
DC_GPIO_GENERICA_Y (R)
DC_GPIO_GENERICB_Y (R)
DC_GPIO_GENERICC_Y (R)
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
8
16
Default
0x0
0x0
0x0
Description
Value on GENERICA pad.
Value on GENERICB pad.
Value on GENERICC pad.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-327
Display Output Registers
Output values of GENERIC pads.
DC_GPIO_DDC4_MASK - RW - 32 bits - [GpuF0MMReg:0x7E00]
Field Name
DC_GPIO_DDC4CLK_MASK
Bits
0
Default
0x0
Description
Enable/Disable GPIO functionality on DDC4CLK pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_DDC4DATA_MASK
8
0x0
Enable/Disable GPIO functionality on DDC4DATA pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
Control GPIO functionality of the DDC4 pads - all fields are active high.
DC_GPIO_DDC4_A - RW - 32 bits - [GpuF0MMReg:0x7E04]
Field Name
DC_GPIO_DDC4CLK_A
Bits
0
Default
0x0
Description
Asynchronous input for DDC4CLK when
DC_GPIO_DDC4CLK_MASK = 1.
DC_GPIO_DDC4DATA_A
8
0x0
Asynchronous input for DDC4DATA when
DC_GPIO_DDC4DATA_MASK = 1.
Asynchronous inputs for the DDC4 pads when the GPIO functionality is enabled by the DC_GPIO_DDC4_MASK register.
DC_GPIO_DDC4_EN - RW - 32 bits - [GpuF0MMReg:0x7E08]
Field Name
DC_GPIO_DDC4CLK_EN
Bits
0
Default
0x0
Description
Output enable for DDC4CLK when
DC_GPIO_DDC4CLK_MASK = 1.
DC_GPIO_DDC4DATA_EN
8
0x0
Output enable for DDC4DATA when
DC_GPIO_DDC4DATA_MASK = 1.
Output enable values for the DDC4 pads when the GPIO functionality is enabled by the DC_GPIO_DDC4_MASK register.
DC_GPIO_DDC4_Y - RW - 32 bits - [GpuF0MMReg:0x7E0C]
Field Name
DC_GPIO_DDC4CLK_Y (R)
DC_GPIO_DDC4DATA_Y (R)
Output values for the DDC4 pads.
Bits
0
8
Default
0x0
0x0
Description
Value on DDC4CLK pad.
Value on DDC4DATA pad.
DC_GPIO_DEBUG - RW - 32 bits - [GpuF0MMReg:0x7E2C]
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-328
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
Field Name
DC_GPIO_VIPGPIO_DEBUG
Bits
0
Default
0x1
DC_GPIO_MACRO_DEBUG
9:8
0x1
Mux control to allow VIP and DCO Debug to share DVO Pads.
Description
0. Normal Mode
1. CG/BIF Debug on GPIO[34:18]
0=Normal
1=CG/BIF Debug on GPIO[34:18]
0. Normal Mode
1. Mux Chip/BIF debug bus on DVODATA[23:0] and
DVOCNTL[0]
2.Mux TMDS on DVODATA[15:6]
3. Mux TMDS2 on DVODATA[15:6]
0=Normal
1=Chip/BIF Debug on dvo[23:0] and dvoctrl[0]
2=TMDSA debug output on dvo[15:6]
3=TMDS2A debug output on dvo[15:6]
DC_GPIO_DVODATA_MASK - RW - 32 bits - [GpuF0MMReg:0x7E30]
Field Name
DC_GPIO_DVODATA_MASK
Bits
23:0
Default
0x0
Description
Enable/Disable GPIO functionality on DVODATA pads. Bits
can be set individually.
DC_GPIO_DVOCNTL_MASK
26:24
0x0
Enable/Disable GPIO functionality on DVOCNTL pads. Bits
can be set individually.
DC_GPIO_DVOCLK_MASK
28
0x0
Enable/Disable GPIO functionality on DVOCLK pads. Bits
can be set individually.
DC_GPIO_MVP_DVOCNTL_MASK
31:30
0x0
Enable/Disable GPIO functionality on DVO_MVP_CNTL
pads. Bits can be set individually.
Control GPIO functionality of the DVO pads - all fields are active high.
DC_GPIO_DVODATA_A - RW - 32 bits - [GpuF0MMReg:0x7E34]
Field Name
DC_GPIO_DVODATA_A
Bits
23:0
Default
0x0
Description
Asynchronous inputs for DVODATA pads when associated
DC_GPIO_DVODATA_MASK = 1.
DC_GPIO_DVOCNTL_A
26:24
0x0
Asynchronous inputs for DVOCNTL pads when associated
DC_GPIO_DVOCNTL_MASK = 1.
DC_GPIO_DVOCLK_A
28
0x0
Asynchronous inputs for DVOCLK pads when associated
DC_GPIO_DVOCLK_MASK = 1.
DC_GPIO_MVP_DVOCNTL_A
31:30
0x0
Asynchronous inputs for DVO_MVP_CNTL pads when
associated DC_GPIO_MVP_DVOCNTL_MASK = 1.
Asynchronous inputs for the DVO pads when the GPIO functionality is enabled by the DC_GPIO_DVODATA_MASK register.
DC_GPIO_DVODATA_EN - RW - 32 bits - [GpuF0MMReg:0x7E38]
Field Name
DC_GPIO_DVODATA_EN
Bits
23:0
Default
0x0
DC_GPIO_DVOCNTL_EN
26:24
0x0
28
0x0
DC_GPIO_DVOCLK_EN
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Output enables for DVODATA pads when associated
DC_GPIO_DVODATA_MASK = 1.
Output enables for DVOCNTL pads when associated
DC_GPIO_DVOCNTL_MASK = 1.
Output enables for DVOCLK pads when associated
DC_GPIO_DVOCLK_MASK = 1.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-329
Display Output Registers
DC_GPIO_MVP_DVOCNTL_EN
31:30
0x0
Output enables for DVO_MVP_CNTL pads when
associated DC_GPIO_MVP_DVOCNTL_MASK = 1.
Output enable values for the DVO pads when the GPIO functionality is enabled by the DC_GPIO_DVODATA_MASK register.
DC_GPIO_DVODATA_Y - RW - 32 bits - [GpuF0MMReg:0x7E3C]
Field Name
DC_GPIO_DVODATA_Y (R)
DC_GPIO_DVOCNTL_Y (R)
DC_GPIO_DVOCLK_Y (R)
DC_GPIO_MVP_DVOCNTL_Y (R)
Output values of the DVO pads.
Bits
23:0
26:24
28
31:30
Default
0x0
0x0
0x0
0x0
Description
Values on DVODATA pads.
Values on DVOCNTL pads.
Values on DVOCLK pads.
Values on DVO_MVP_CNTL pads.
DC_GPIO_DDC1_MASK - RW - 32 bits - [GpuF0MMReg:0x7E40]
Field Name
DC_GPIO_DDC1CLK_MASK
Bits
0
Default
0x0
Description
Enable/Disable GPIO functionality on DDC1CLK pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_DDC1CLK_PD_EN
4
0x0
Set to 1 to enable pulldown on DDC1CLK pad
0=Disable
1=Enable
DC_GPIO_DDC1CLK_PU_EN
6
0x0
Set to 1 to enable pullup on DDC1CLK pad
0=Disable
1=Enable
DC_GPIO_DDC1DATA_MASK
8
0x0
Enable/Disable GPIO functionality on DDC1DATA pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_DDC1DATA_PD_EN
12
0x0
Set to 1 to enable pulldown on DDC1DATA pad
0=Disable
1=Enable
DC_GPIO_DDC1DATA_PU_EN
14
0x0
Set to 1 to enable pullup on DDC1DATA pad
0=Disable
1=Enable
Control GPIO functionality of the DDC1 pads - all fields are active high.
DC_GPIO_DDC1_A - RW - 32 bits - [GpuF0MMReg:0x7E44]
Field Name
DC_GPIO_DDC1CLK_A
Bits
0
Default
0x0
Description
Asynchronous input for DDC1CLK when
DC_GPIO_DDC1CLK_MASK = 1.
DC_GPIO_DDC1DATA_A
8
0x0
Asynchronous input for DDC1DATA when
DC_GPIO_DDC1DATA_MASK = 1.
Asynchronous inputs for the DDC1 pads when the GPIO functionality is enabled by the DC_GPIO_DDC1_MASK register.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-330
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DC_GPIO_DDC1_EN - RW - 32 bits - [GpuF0MMReg:0x7E48]
Field Name
DC_GPIO_DDC1CLK_EN
Bits
0
Default
0x0
Description
Output enable for DDC1CLK when
DC_GPIO_DDC1CLK_MASK = 1.
DC_GPIO_DDC1DATA_EN
8
0x0
Output enable for DDC1DATA when
DC_GPIO_DDC1DATA_MASK = 1.
Output enable values for the DDC1 pads when the GPIO functionality is enabled by the DC_GPIO_DDC1_MASK register.
DC_GPIO_DDC1_Y - RW - 32 bits - [GpuF0MMReg:0x7E4C]
Field Name
DC_GPIO_DDC1CLK_Y (R)
DC_GPIO_DDC1DATA_Y (R)
Output values of the DDC1 pads.
Bits
0
8
Default
0x0
0x0
Description
Value on DDC1CLK pad.
Value on DDC1DATA pad.
DC_GPIO_DDC2_MASK - RW - 32 bits - [GpuF0MMReg:0x7E50]
Field Name
DC_GPIO_DDC2CLK_MASK
Bits
0
Default
0x0
Description
Enable/Disable GPIO functionality on DDC2CLK pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_DDC2DATA_MASK
8
0x0
Enable/Disable GPIO functionality on DDC2DATA pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_DDC2DATA_PD_EN
12
0x0
Set to 1 to enable pulldown on DDC2DATA pad
0=Disable
1=Enable
DC_GPIO_DDC2DATA_PU_EN
14
0x0
Set to 1 to enable pullup on DDC2DATA pad
0=Disable
1=Enable
Control GPIO functionality of the DDC2 pads - all fields are active high.
DC_GPIO_DDC2_A - RW - 32 bits - [GpuF0MMReg:0x7E54]
Field Name
DC_GPIO_DDC2CLK_A
Description
Asynchronous input for DDC2CLK when
DC_GPIO_DDC2CLK_MASK = 1.
DC_GPIO_DDC2DATA_A
8
0x0
Asynchronous input for DDC2DATA when
DC_GPIO_DDC2DATA_MASK = 1.
Asynchronous inputs for the DDC2 pads when the GPIO functionality is enabled by the DC_GPIO_DDC2_MASK register.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-331
Display Output Registers
DC_GPIO_DDC2_EN - RW - 32 bits - [GpuF0MMReg:0x7E58]
Field Name
DC_GPIO_DDC2CLK_EN
Bits
0
Default
0x0
Description
Output enable for DDC2CLK when
DC_GPIO_DDC2CLK_MASK = 1.
DC_GPIO_DDC2DATA_EN
8
0x0
Output enable for DDC2DATA when
DC_GPIO_DDC2DATA_MASK = 1.
Output enable values for the DDC2 pads when the GPIO functionality is enabled by the DC_GPIO_DDC2_MASK register.
DC_GPIO_DDC2_Y - RW - 32 bits - [GpuF0MMReg:0x7E5C]
Field Name
DC_GPIO_DDC2CLK_Y (R)
DC_GPIO_DDC2DATA_Y (R)
Output values of the DDC2 pads.
Bits
0
8
Default
0x0
0x0
Description
Value on DDC2CLK pad.
Value on DDC2DATA pad.
DC_GPIO_DDC3_MASK - RW - 32 bits - [GpuF0MMReg:0x7E60]
Field Name
DC_GPIO_DDC3CLK_MASK
Bits
0
Default
0x0
Description
Enable/Disable GPIO functionality on DDC3CLK pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_DDC3DATA_MASK
8
0x0
Enable/Disable GPIO functionality on DDC3DATA pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_DDC3DATA_PD_EN
12
0x0
Set to 1 to enable pulldown on DDC3DATA pad
0=Disable
1=Enable
DC_GPIO_DDC3DATA_PU_EN
14
0x0
Set to 1 to enable pullup on DDC3DATA pad
0=Disable
1=Enable
Control GPIO functionality of the DDC3 pads - all fields are active high.
DC_GPIO_DDC3_A - RW - 32 bits - [GpuF0MMReg:0x7E64]
Field Name
DC_GPIO_DDC3CLK_A
Bits
0
Default
0x0
Description
Asynchronous input for DDC3CLK when
DC_GPIO_DDC3CLK_MASK = 1.
DC_GPIO_DDC3DATA_A
8
0x0
Asynchronous input for DDC3DATA when
DC_GPIO_DDC3DATA_MASK = 1.
Asynchronous inputs for the DDC3 pads when the GPIO functionality is enabled by the DC_GPIO_DDC3_MASK register.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-332
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DC_GPIO_DDC3_EN - RW - 32 bits - [GpuF0MMReg:0x7E68]
Field Name
DC_GPIO_DDC3CLK_EN
Bits
0
Default
0x0
Description
Output enable for DDC3CLK when
DC_GPIO_DDC3CLK_MASK = 1.
DC_GPIO_DDC3DATA_EN
8
0x0
Output enable for DDC3DATA when
DC_GPIO_DDC3DATA_MASK = 1.
Output enable values for the DDC3 pads when the GPIO functionality is enabled by the DC_GPIO_DDC3_MASK register.
DC_GPIO_DDC3_Y - RW - 32 bits - [GpuF0MMReg:0x7E6C]
Field Name
DC_GPIO_DDC3CLK_Y (R)
DC_GPIO_DDC3DATA_Y (R)
Output values for the DDC3 pads.
Bits
0
8
Default
0x0
0x0
Description
Value on DDC3CLK pad.
Value on DDC3DATA pad.
DC_GPIO_SYNCA_MASK - RW - 32 bits - [GpuF0MMReg:0x7E70]
Field Name
DC_GPIO_HSYNCA_MASK
Bits
0
Default
0x0
Description
Enable/Disable GPIO functionality on HSYNCA pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_HSYNCA_PD_EN
4
0x0
Set to 1 to enable pulldown on HSYNCA pad
0=Disable
1=Enable
DC_GPIO_HSYNCA_PU_EN
6
0x0
Set to 1 to enable pullup on HSYNCA pad
0=Disable
1=Enable
DC_GPIO_VSYNCA_MASK
8
0x0
Enable/Disable GPIO functionality on VSYNCA pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_VSYNCA_PD_EN
12
0x0
Set to 1 to enable pulldown on VSYNCA pad
0=Disable
1=Enable
DC_GPIO_VSYNCA_PU_EN
14
0x0
Set to 1 to enable pullup on VSYNCA pad
0=Disable
1=Enable
Control GPIO functionality of the HSYNCA & VSYNCA pads - all fields are active high.
DC_GPIO_SYNCA_A - RW - 32 bits - [GpuF0MMReg:0x7E74]
Field Name
DC_GPIO_HSYNCA_A
DC_GPIO_VSYNCA_A
© 2007 Advanced Micro Devices, Inc.
Proprietary
Bits
0
Default
0x0
8
0x0
Description
Asynchronous input for HSYNCA when
DC_GPIO_HSYNCA_MASK = 1.
Asynchronous input for VSYNCA when
DC_GPIO_VSYNCA_MASK = 1.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-333
Display Output Registers
Asynchronous inputs for the HSYNCA & VSYNCA pads when the GPIO functionality is enabled by the
DC_GPIO_SYNCA_MASK register.
DC_GPIO_SYNCA_EN - RW - 32 bits - [GpuF0MMReg:0x7E78]
Field Name
DC_GPIO_HSYNCA_EN
Bits
0
Default
0x0
Description
Output enable for HSYNCA when
DC_GPIO_HSYNCA_MASK = 1.
DC_GPIO_VSYNCA_EN
8
0x0
Output enable for VSYNCA when
DC_GPIO_VSYNCA_MASK = 1.
Output enable values for the HSYNCA & VSYNCA pads when the GPIO functionality is enabled by the
DC_GPIO_SYNCA_MASK register.
DC_GPIO_SYNCA_Y - RW - 32 bits - [GpuF0MMReg:0x7E7C]
Field Name
Bits
DC_GPIO_HSYNCA_Y (R)
0
DC_GPIO_VSYNCA_Y (R)
8
Output values of the HSYNCA & VSYNCA pads.
Default
0x0
0x0
Description
Value on HSYNCA pad.
Value on VSYNCA pad.
DC_GPIO_SYNCB_MASK - RW - 32 bits - [GpuF0MMReg:0x7E80]
Field Name
DC_GPIO_HSYNCB_MASK
Bits
0
Default
0x0
Description
Enable/Disable GPIO functionality on HSYNCB pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_VSYNCB_MASK
8
0x0
Enable/Disable GPIO functionality on VSYNCB pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
Control GPIO functionality of the HSYNCB & VSYNCB pads - all fields are active high.
DC_GPIO_SYNCB_A - RW - 32 bits - [GpuF0MMReg:0x7E84]
Field Name
DC_GPIO_HSYNCB_A
Bits
0
Default
0x0
Description
Asynchronous input for HSYNCB when
DC_GPIO_HSYNCB_MASK = 1.
DC_GPIO_VSYNCB_A
8
0x0
Asynchronous input for VSYNCB when
DC_GPIO_VSYNCB_MASK = 1.
Asynchronous inputs for the HSYNCB & VSYNCB pads when the GPIO functionality is enabled by the
DC_GPIO_SYNCB_MASK register.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-334
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DC_GPIO_SYNCB_EN - RW - 32 bits - [GpuF0MMReg:0x7E88]
Field Name
DC_GPIO_HSYNCB_EN
Bits
0
Default
0x0
Description
Output enable for HSYNCB when
DC_GPIO_HSYNCB_MASK = 1.
DC_GPIO_VSYNCB_EN
8
0x0
Output enable for VSYNCB when
DC_GPIO_VSYNCB_MASK = 1.
Output enable values for the HSYNCB & VSYNCB pads when the GPIO functionality is enabled by the
DC_GPIO_SYNCB_MASK register.
DC_GPIO_SYNCB_Y - RW - 32 bits - [GpuF0MMReg:0x7E8C]
Field Name
Bits
DC_GPIO_HSYNCB_Y (R)
0
DC_GPIO_VSYNCB_Y (R)
8
Output values of the HSYNCB & VSYNCB pads.
Default
0x0
0x0
Description
Value on HSYNCB pad.
Value on VSYNCB pad.
DC_GPIO_HPD_MASK - RW - 32 bits - [GpuF0MMReg:0x7E90]
Field Name
DC_GPIO_HPD1_MASK
Bits
0
Default
0x0
Description
Enable/Disable GPIO functionality on HPD1 pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_HPD1_PD_EN
4
0x0
Set to 1 to enable pulldown on HPD1 pad
0=Disable
1=Enable
DC_GPIO_HPD1_PU_EN
6
0x0
Set to 1 to enable pullup on HPD1 pad
0=Disable
1=Enable
DC_GPIO_HPD2_MASK
8
0x0
Enable/Disable GPIO functionality on HPD2 pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
DC_GPIO_HPD3_MASK
16
0x0
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
Control GPIO functionality of the Hot Plug Detect pads - all fields are active high.
DC_GPIO_HPD_A - RW - 32 bits - [GpuF0MMReg:0x7E94]
Field Name
DC_GPIO_HPD1_A
Bits
0
Default
0x0
DC_GPIO_HPD2_A
8
0x0
DC_GPIO_HPD3_A
16
0x0
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Asynchronous input for HPD1 when
DC_GPIO_HPD1_MASK = 1.
Asynchronous input for HPD2 when
DC_GPIO_HPD2_MASK = 1.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-335
Display Output Registers
Asynchronous inputs for the HPD pads when the GPIO functionality is enabled by the DC_GPIO_HPD_MASK register.
DC_GPIO_HPD_EN - RW - 32 bits - [GpuF0MMReg:0x7E98]
Field Name
DC_GPIO_HPD1_EN
DC_GPIO_HPD2_EN
Bits
0
Default
0x0
8
0x0
Description
Output enable for HPD1 when DC_GPIO_HPD1_MASK =
1.
Output enable for HPD2 when DC_GPIO_HPD2_MASK =
1.
DC_GPIO_HPD3_EN
16
0x0
Output enable values for the HPD pads when the GPIO functionality is enabled by the DC_GPIO_HPD_MASK register.
DC_GPIO_HPD_Y - RW - 32 bits - [GpuF0MMReg:0x7E9C]
Field Name
DC_GPIO_HPD1_Y (R)
DC_GPIO_HPD2_Y (R)
DC_GPIO_HPD3_Y (R)
Output values of the HPD pads.
Bits
0
8
16
Default
0x0
0x0
0x0
Value on HPD1 pad.
Value on HPD2 pad.
Description
DC_GPIO_PWRSEQ_MASK - RW - 32 bits - [GpuF0MMReg:0x7EA0]
Field Name
DC_GPIO_BLON_MASK
Bits
0
Default
0x0
DC_GPIO_BLON_PD_EN
4
0x0
DC_GPIO_BLON_PU_EN
6
0x0
DC_GPIO_DIGON_MASK
8
0x0
DC_GPIO_DIGON_PD_EN
12
0x0
DC_GPIO_DIGON_PU_EN
14
0x0
DC_GPIO_ENA_BL_MASK
16
0x0
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-336
Description
Enable/Disable GPIO functionality on BLON pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
Set to 1 to enable pulldown on BLON pad
0=Disable
1=Enable
Set to 1 to enable pullup on BLON pad
0=Disable
1=Enable
Enable/Disable GPIO functionality on DIGON pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
Set to 1 to enable pulldown on DIGON pad
0=Disable
1=Enable
Set to 1 to enable pullup on DIGON pad
0=Disable
1=Enable
Enable/Disable GPIO functionality on ENA_BL pad
0=Pad Driven by Hardware - Normal Operation
1=Pad Controlled by Software through associated GPIO
registers. Pad values generated by hardware are
overridden.
© 2007 Advanced Micro Devices, Inc.
Proprietary
Display Output Registers
DC_GPIO_ENA_BL_PD_EN
20
0x0
Set to 1 to enable pulldown on ENA_BL pad
0=Disable
1=Enable
DC_GPIO_ENA_BL_PU_EN
22
0x0
Set to 1 to enable pullup on ENA_BL pad
0=Disable
1=Enable
Control GPIO functionality of the BLON, DIGON & ENA_BL pads - all fields are active high.
DC_GPIO_PWRSEQ_A - RW - 32 bits - [GpuF0MMReg:0x7EA4]
Field Name
DC_GPIO_BLON_A
Bits
0
Default
0x0
Description
Asynchronous input for BLON when
DC_GPIO_BLON_MASK = 1.
DC_GPIO_DIGON_A
8
0x0
Asynchronous input for BIGON when
DC_GPIO_DIGON_MASK = 1.
DC_GPIO_ENA_BL_A
16
0x0
Asynchronous input for BIGON when
DC_GPIO_ENA_BL_MASK = 1.
Asynchronous inputs for the BLON, DIGON & ENA_BL pads when the GPIO functionality is enabled by the
DC_GPIO_PWRSEQ_MASK register.
DC_GPIO_PWRSEQ_EN - RW - 32 bits - [GpuF0MMReg:0x7EA8]
Field Name
DC_GPIO_BLON_EN
Bits
0
Default
0x0
Description
Output enable for BLON when DC_GPIO_BLON_MASK =
1.
DC_GPIO_DIGON_EN
8
0x0
Output enable for DIGON when DC_GPIO_DIGON_MASK
= 1.
DC_GPIO_ENA_BL_EN
16
0x0
Output enable for ENA_BL when
DC_GPIO_ENA_BL_MASK = 1.
Output enable values for the BLON, DIGON & ENA_BL pads when the GPIO functionality is enabled by the
DC_GPIO_PWRSEQ_MASK register.
DC_GPIO_PWRSEQ_Y - RW - 32 bits - [GpuF0MMReg:0x7EAC]
Field Name
Bits
DC_GPIO_BLON_Y (R)
0
DC_GPIO_DIGON_Y (R)
8
DC_GPIO_ENA_BL_Y (R)
16
Output values of the BLON, DIGON & ENA_BL pads.
Default
0x0
0x0
0x0
Description
Value on BLON pad.
Value on DIGON pad.
Value on ENA_BL pad.
DC_GPIO_PAD_STRENGTH_1 - RW - 32 bits - [GpuF0MMReg:0x7ED4]
Field Name
SYNC_STRENGTH_SN
Bits
27:24
Default
0x7
SYNC_STRENGTH_SP
31:28
0x4
© 2007 Advanced Micro Devices, Inc.
Proprietary
Description
Control SN strengths for HSYNCA, HSYNCB, VSYNCA &
VSYNCB
Control SP strengths for HSYNCA, HSYNCB, VSYNCA &
VSYNCB
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-337
Display Output Registers
DC_GPIO_PAD_STRENGTH_2 - RW - 32 bits - [GpuF0MMReg:0x7ED8]
Field Name
STRENGTH_SN
Bits
3:0
Default
0x7
STRENGTH_SP
7:4
0x4
19:16
23:20
0x7
0x4
PWRSEQ_STRENGTH_SN
PWRSEQ_STRENGTH_SP
42589 RV630 Register Reference Guide (OEM) Rev 1.01
2-338
Description
Control SN strengths for DDC1, DDC2, DDC3, GENERICA,
GENERICB, GENERICC, HPD1 & HPD2 pads
Control SP strengths for DDC1, DDC2, DDC3, GENERICA,
GENERICB, GENERICC, HPD1 & HPD2 pads
Control SN strengths for BLON & DIGON pads
Control SP strengths for BLON & DIGON pads
© 2007 Advanced Micro Devices, Inc.
Proprietary
Appendix A
Cross Referenced Index
A.1
Quick Cross-Reference Index
“Configuration Registers Sorted by Name” on page A-2
“Configuration Registers Sorted by Address” on page A-5
“Clock Generator Registers Sorted by Name” on page A-8
“Clock Generator Registers Sorted by Address” on page A-9
“Display Contoller Registers Stored by Name” on page A-10
“Display Controller Registers Stored by Address” on page A-25
“Host Interface Decode Space Registers Sorted by Name” on page A-40
“Memory Controller Registers Sorted By Name” on page A-41
“Memory Controller Registers Sorted By Address” on page A-45
“PCI-E Registers Sorted By Name” on page A-49
“PCI-E Registers Sorted By Address” on page A-51
“VIP Registers Sorted By Name” on page A-53
“VIP Registers Sorted By Address” on page A-56
“VGA ATTR Registers Sorted By Name” on page A-59
“VGA CRT Registers Sorted By Name” on page A-60
“VGA GRPH Registers Sorted By Name” on page A-61
“VGA SEQ Registers Sorted By Name” on page A-62
“All Registers Sorted by Name” on page A-63
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-1
A.2
Configuration Registers Sorted by Name
Table A-1 Configuration Registers Sorted by Name
Secondary
Address
Register Name
Address
ADAPTER_ID
AudioPcie\:0x2C
GpuF0Pcie\:0x2C
GpuF1Pcie\:0x2C
2-77
ADAPTER_ID_W
AudioPcie\:0x4C
GpuF0Pcie\:0x4C
GpuF1Pcie\:0x4C
2-77
BASE_CLASS
AudioPcie\:0xB
GpuF0Pcie\:0xB
GpuF1Pcie\:0xB
2-75
BIST
AudioPcie\:0xF
GpuF0Pcie\:0xF
GpuF1Pcie\:0xF
2-76
CACHE_LINE
AudioPcie\:0xC
GpuF0Pcie\:0xC
GpuF1Pcie\:0xC
2-76
CAP_PTR
AudioPcie\:0x34
GpuF0Pcie\:0x34
GpuF1Pcie\:0x34
2-76
COMMAND
AudioPcie\:0x4
GpuF0Pcie\:0x4
GpuF1Pcie\:0x4
2-73
DEVICE_CAP
AudioPcie\:0x5C
GpuF0Pcie\:0x5C
GpuF1Pcie\:0x5C
2-79
DEVICE_CAP2
AudioPcie\:0x7C
GpuF0Pcie\:0x7C
GpuF1Pcie\:0x7C
2-83
DEVICE_CNTL
AudioPcie\:0x60
GpuF0Pcie\:0x60
GpuF1Pcie\:0x60
2-80
DEVICE_CNTL2
AudioPcie\:0x80
GpuF0Pcie\:0x80
GpuF1Pcie\:0x80
2-83
DEVICE_ID
AudioPcie\:0x2
GpuF0Pcie\:0x2
GpuF1Pcie\:0x2
2-73
DEVICE_STATUS
AudioPcie\:0x62
GpuF0Pcie\:0x62
GpuF1Pcie\:0x62
2-81
DEVICE_STATUS2
AudioPcie\:0x82
GpuF0Pcie\:0x82
GpuF1Pcie\:0x82
2-83
HEADER
AudioPcie\:0xE
GpuF0Pcie\:0xE
GpuF1Pcie\:0xE
2-76
INTERRUPT_LINE
AudioPcie\:0x3C
GpuF0Pcie\:0x3C
GpuF1Pcie\:0x3C
2-77
INTERRUPT_PIN
AudioPcie\:0x3D
GpuF0Pcie\:0x3D
GpuF1Pcie\:0x3D
2-77
LATENCY
AudioPcie\:0xD
GpuF0Pcie\:0xD
GpuF1Pcie\:0xD
2-76
LINK_CAP
AudioPcie\:0x64
GpuF0Pcie\:0x64
GpuF1Pcie\:0x64
2-81
LINK_CAP2
AudioPcie\:0x84
GpuF0Pcie\:0x84
GpuF1Pcie\:0x84
2-83
LINK_CNTL
AudioPcie\:0x68
GpuF0Pcie\:0x68
GpuF1Pcie\:0x68
2-82
LINK_CNTL2
AudioPcie\:0x88
GpuF0Pcie\:0x88
GpuF1Pcie\:0x88
2-84
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-2
Page
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-1 Configuration Registers Sorted by Name
(Continued)
Secondary
Address
Register Name
Address
LINK_STATUS
AudioPcie\:0x6A
GpuF0Pcie\:0x6A
GpuF1Pcie\:0x6A
2-82
LINK_STATUS2
AudioPcie\:0x8A
GpuF0Pcie\:0x8A
GpuF1Pcie\:0x8A
2-84
MAX_LATENCY
AudioPcie\:0x3F
GpuF0Pcie\:0x3F
GpuF1Pcie\:0x3F
2-77
MIN_GRANT
AudioPcie\:0x3E
GpuF0Pcie\:0x3E
GpuF1Pcie\:0x3E
2-77
MSI_CAP_LIST
AudioPcie\:0xA0
GpuF0Pcie\:0xA0
GpuF1Pcie\:0xA0
2-84
MSI_MSG_ADDR_HI
AudioPcie\:0xA8
GpuF0Pcie\:0xA8
GpuF1Pcie\:0xA8
2-85
MSI_MSG_ADDR_LO
AudioPcie\:0xA4
GpuF0Pcie\:0xA4
GpuF1Pcie\:0xA4
2-85
MSI_MSG_CNTL
AudioPcie\:0xA2
GpuF0Pcie\:0xA2
GpuF1Pcie\:0xA2
2-84
MSI_MSG_DATA
AudioPcie\:0xA8
GpuF0Pcie\:0xA8
GpuF1Pcie\:0xA8
2-85
MSI_MSG_DATA_64
AudioPcie\:0xAC
GpuF0Pcie\:0xAC
GpuF1Pcie\:0xAC
2-85
PCIE_ADV_ERR_CAP_CNTL
AudioPcie\:0x168
GpuF0Pcie\:0x168
GpuF1Pcie\:0x168
2-87
PCIE_ADV_ERR_RPT_ENH_CAP_LIST
AudioPcie\:0x150
GpuF0Pcie\:0x150
GpuF1Pcie\:0x150
2-85
PCIE_CAP
AudioPcie\:0x5A
GpuF0Pcie\:0x5A
GpuF1Pcie\:0x5A
2-79
PCIE_CAP_LIST
AudioPcie\:0x58
GpuF0Pcie\:0x58
GpuF1Pcie\:0x58
2-78
PCIE_CORR_ERR_MASK
AudioPcie\:0x164
GpuF0Pcie\:0x164
GpuF1Pcie\:0x164
2-87
PCIE_CORR_ERR_STATUS
AudioPcie\:0x160
GpuF0Pcie\:0x160
GpuF1Pcie\:0x160
2-87
PCIE_HDR_LOG0
AudioPcie\:0x16C
GpuF0Pcie\:0x16C
GpuF1Pcie\:0x16C
2-87
PCIE_HDR_LOG1
AudioPcie\:0x170
GpuF0Pcie\:0x170
GpuF1Pcie\:0x170
2-88
PCIE_HDR_LOG2
AudioPcie\:0x174
GpuF0Pcie\:0x174
GpuF1Pcie\:0x174
2-88
PCIE_HDR_LOG3
AudioPcie\:0x178
GpuF0Pcie\:0x178
GpuF1Pcie\:0x178
2-88
PCIE_UNCORR_ERR_MASK
AudioPcie\:0x158
GpuF0Pcie\:0x158
GpuF1Pcie\:0x158
2-86
PCIE_UNCORR_ERR_SEVERITY
AudioPcie\:0x15C
GpuF0Pcie\:0x15C
GpuF1Pcie\:0x15C
2-86
PCIE_UNCORR_ERR_STATUS
AudioPcie\:0x154
GpuF0Pcie\:0x154
GpuF1Pcie\:0x154
2-86
© 2007 Advanced Micro Devices, Inc.
Proprietary
Page
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-3
Table A-1 Configuration Registers Sorted by Name
Register Name
(Continued)
Address
Secondary
Address
Page
PMI_CAP
AudioPcie\:0x52
GpuF0Pcie\:0x52
GpuF1Pcie\:0x52
2-78
PMI_CAP_LIST
AudioPcie\:0x50
GpuF0Pcie\:0x50
GpuF1Pcie\:0x50
2-78
PMI_STATUS_CNTL
AudioPcie\:0x54
GpuF0Pcie\:0x54
GpuF1Pcie\:0x54
2-78
PROG_INTERFACE
AudioPcie\:0x9
GpuF0Pcie\:0x9
GpuF1Pcie\:0x9
2-75
REVISION_ID
AudioPcie\:0x8
GpuF0Pcie\:0x8
GpuF1Pcie\:0x8
2-75
STATUS
AudioPcie\:0x6
GpuF0Pcie\:0x6
GpuF1Pcie\:0x6
2-74
SUB_CLASS
AudioPcie\:0xA
GpuF0Pcie\:0xA
GpuF1Pcie\:0xA
2-75
VENDOR_ID
AudioPcie\:0x0
GpuF0Pcie\:0x0
GpuF1Pcie\:0x0
2-73
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-4
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.3
Configuration Registers Sorted by Address
Table A-2 Configuration Registers Sorted by Address
Register Name
Address
Secondary
Address
Page
AudioPcie\:0x0
GpuF0Pcie\:0x0
GpuF1Pcie\:0x0
2-73
PCIE_ADV_ERR_RPT_ENH_CAP_LIST
AudioPcie\:0x150
GpuF0Pcie\:0x150
GpuF1Pcie\:0x150
2-85
PCIE_UNCORR_ERR_STATUS
AudioPcie\:0x154
GpuF0Pcie\:0x154
GpuF1Pcie\:0x154
2-86
PCIE_UNCORR_ERR_MASK
AudioPcie\:0x158
GpuF0Pcie\:0x158
GpuF1Pcie\:0x158
2-86
PCIE_UNCORR_ERR_SEVERITY
AudioPcie\:0x15C
GpuF0Pcie\:0x15C
GpuF1Pcie\:0x15C
2-86
PCIE_CORR_ERR_STATUS
AudioPcie\:0x160
GpuF0Pcie\:0x160
GpuF1Pcie\:0x160
2-87
PCIE_CORR_ERR_MASK
AudioPcie\:0x164
GpuF0Pcie\:0x164
GpuF1Pcie\:0x164
2-87
PCIE_ADV_ERR_CAP_CNTL
AudioPcie\:0x168
GpuF0Pcie\:0x168
GpuF1Pcie\:0x168
2-87
PCIE_HDR_LOG0
AudioPcie\:0x16C
GpuF0Pcie\:0x16C
GpuF1Pcie\:0x16C
2-87
PCIE_HDR_LOG1
AudioPcie\:0x170
GpuF0Pcie\:0x170
GpuF1Pcie\:0x170
2-88
PCIE_HDR_LOG2
AudioPcie\:0x174
GpuF0Pcie\:0x174
GpuF1Pcie\:0x174
2-88
PCIE_HDR_LOG3
AudioPcie\:0x178
GpuF0Pcie\:0x178
GpuF1Pcie\:0x178
2-88
AudioPcie\:0x2
GpuF0Pcie\:0x2
GpuF1Pcie\:0x2
2-73
ADAPTER_ID
AudioPcie\:0x2C
GpuF0Pcie\:0x2C
GpuF1Pcie\:0x2C
2-77
CAP_PTR
AudioPcie\:0x34
GpuF0Pcie\:0x34
GpuF1Pcie\:0x34
2-76
INTERRUPT_LINE
AudioPcie\:0x3C
GpuF0Pcie\:0x3C
GpuF1Pcie\:0x3C
2-77
INTERRUPT_PIN
AudioPcie\:0x3D
GpuF0Pcie\:0x3D
GpuF1Pcie\:0x3D
2-77
MIN_GRANT
AudioPcie\:0x3E
GpuF0Pcie\:0x3E
GpuF1Pcie\:0x3E
2-77
MAX_LATENCY
AudioPcie\:0x3F
GpuF0Pcie\:0x3F
GpuF1Pcie\:0x3F
2-77
AudioPcie\:0x4
GpuF0Pcie\:0x4
GpuF1Pcie\:0x4
2-73
AudioPcie\:0x4C
GpuF0Pcie\:0x4C
GpuF1Pcie\:0x4C
2-77
VENDOR_ID
DEVICE_ID
COMMAND
ADAPTER_ID_W
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-5
Table A-2 Configuration Registers Sorted by Address
(Continued)
Secondary
Address
Register Name
Address
PMI_CAP_LIST
AudioPcie\:0x50
GpuF0Pcie\:0x50
GpuF1Pcie\:0x50
2-78
PMI_CAP
AudioPcie\:0x52
GpuF0Pcie\:0x52
GpuF1Pcie\:0x52
2-78
PMI_STATUS_CNTL
AudioPcie\:0x54
GpuF0Pcie\:0x54
GpuF1Pcie\:0x54
2-78
PCIE_CAP_LIST
AudioPcie\:0x58
GpuF0Pcie\:0x58
GpuF1Pcie\:0x58
2-78
PCIE_CAP
AudioPcie\:0x5A
GpuF0Pcie\:0x5A
GpuF1Pcie\:0x5A
2-79
DEVICE_CAP
AudioPcie\:0x5C
GpuF0Pcie\:0x5C
GpuF1Pcie\:0x5C
2-79
STATUS
AudioPcie\:0x6
GpuF0Pcie\:0x6
GpuF1Pcie\:0x6
2-74
DEVICE_CNTL
AudioPcie\:0x60
GpuF0Pcie\:0x60
GpuF1Pcie\:0x60
2-80
DEVICE_STATUS
AudioPcie\:0x62
GpuF0Pcie\:0x62
GpuF1Pcie\:0x62
2-81
LINK_CAP
AudioPcie\:0x64
GpuF0Pcie\:0x64
GpuF1Pcie\:0x64
2-81
LINK_CNTL
AudioPcie\:0x68
GpuF0Pcie\:0x68
GpuF1Pcie\:0x68
2-82
LINK_STATUS
AudioPcie\:0x6A
GpuF0Pcie\:0x6A
GpuF1Pcie\:0x6A
2-82
DEVICE_CAP2
AudioPcie\:0x7C
GpuF0Pcie\:0x7C
GpuF1Pcie\:0x7C
2-83
REVISION_ID
AudioPcie\:0x8
GpuF0Pcie\:0x8
GpuF1Pcie\:0x8
2-75
DEVICE_CNTL2
AudioPcie\:0x80
GpuF0Pcie\:0x80
GpuF1Pcie\:0x80
2-83
DEVICE_STATUS2
AudioPcie\:0x82
GpuF0Pcie\:0x82
GpuF1Pcie\:0x82
2-83
LINK_CAP2
AudioPcie\:0x84
GpuF0Pcie\:0x84
GpuF1Pcie\:0x84
2-83
LINK_CNTL2
AudioPcie\:0x88
GpuF0Pcie\:0x88
GpuF1Pcie\:0x88
2-84
LINK_STATUS2
AudioPcie\:0x8A
GpuF0Pcie\:0x8A
GpuF1Pcie\:0x8A
2-84
PROG_INTERFACE
AudioPcie\:0x9
GpuF0Pcie\:0x9
GpuF1Pcie\:0x9
2-75
SUB_CLASS
AudioPcie\:0xA
GpuF0Pcie\:0xA
GpuF1Pcie\:0xA
2-75
MSI_CAP_LIST
AudioPcie\:0xA0
GpuF0Pcie\:0xA0
GpuF1Pcie\:0xA0
2-84
MSI_MSG_CNTL
AudioPcie\:0xA2
GpuF0Pcie\:0xA2
GpuF1Pcie\:0xA2
2-84
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-6
Page
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-2 Configuration Registers Sorted by Address
Register Name
(Continued)
Address
Secondary
Address
Page
MSI_MSG_ADDR_LO
AudioPcie\:0xA4
GpuF0Pcie\:0xA4
GpuF1Pcie\:0xA4
2-85
MSI_MSG_ADDR_HI
AudioPcie\:0xA8
GpuF0Pcie\:0xA8
GpuF1Pcie\:0xA8
2-85
MSI_MSG_DATA
AudioPcie\:0xA8
GpuF0Pcie\:0xA8
GpuF1Pcie\:0xA8
2-85
MSI_MSG_DATA_64
AudioPcie\:0xAC
GpuF0Pcie\:0xAC
GpuF1Pcie\:0xAC
2-85
BASE_CLASS
AudioPcie\:0xB
GpuF0Pcie\:0xB
GpuF1Pcie\:0xB
2-75
CACHE_LINE
AudioPcie\:0xC
GpuF0Pcie\:0xC
GpuF1Pcie\:0xC
2-76
LATENCY
AudioPcie\:0xD
GpuF0Pcie\:0xD
GpuF1Pcie\:0xD
2-76
HEADER
AudioPcie\:0xE
GpuF0Pcie\:0xE
GpuF1Pcie\:0xE
2-76
BIST
AudioPcie\:0xF
GpuF0Pcie\:0xF
GpuF1Pcie\:0xF
2-76
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-7
A.4
Clock Generator Registers Sorted by Name
Table A-3 Clock Generator Registers Sorted by Name
Register Name
Address
Page
CG_CLKPIN_CNTL
GpuF0MMReg\:0x644
2-94
CG_MISC_REG
GpuF0MMReg\:0x7C8
2-95
CG_TC_JTAG_0
GpuF0MMReg\:0x7A0
2-94
CG_TC_JTAG_1
GpuF0MMReg\:0x7A4
2-95
DLL_CNTL
GpuF0MMReg\:0x62C
2-92
ERROR_STATUS
GpuF0MMReg\:0x640
2-93
GENERAL_PWRMGT
GpuF0MMReg\:0x618
2-90
MCLK_PWRMGT_CNTL
GpuF0MMReg\:0x624
2-91
MPLL_CNTL_MODE
GpuF0MMReg\:0x614
2-90
MPLL_FUNC_CNTL
GpuF0MMReg\:0x610
2-89
MPLL_TIME
GpuF0MMReg\:0x634
2-93
PLL_BYPASSCLK_SEL
GpuF0MMReg\:0x608
2-89
PLL_TEST_CNTL
GpuF0MMReg\:0x79C
2-94
SCLK_PWRMGT_CNTL
GpuF0MMReg\:0x620
2-91
SPLL_CNTL_MODE
GpuF0MMReg\:0x60C
2-89
SPLL_TIME
GpuF0MMReg\:0x630
2-93
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-8
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.5
Clock Generator Registers Sorted by Address
Table A-4 Clock Generator Registers Sorted by Address
Register Name
Address
Page
PLL_BYPASSCLK_SEL
GpuF0MMReg\:0x608
2-89
SPLL_CNTL_MODE
GpuF0MMReg\:0x60C
2-89
MPLL_FUNC_CNTL
GpuF0MMReg\:0x610
2-89
MPLL_CNTL_MODE
GpuF0MMReg\:0x614
2-90
GENERAL_PWRMGT
GpuF0MMReg\:0x618
2-90
SCLK_PWRMGT_CNTL
GpuF0MMReg\:0x620
2-91
MCLK_PWRMGT_CNTL
GpuF0MMReg\:0x624
2-91
DLL_CNTL
GpuF0MMReg\:0x62C
2-92
SPLL_TIME
GpuF0MMReg\:0x630
2-93
MPLL_TIME
GpuF0MMReg\:0x634
2-93
ERROR_STATUS
GpuF0MMReg\:0x640
2-93
CG_CLKPIN_CNTL
GpuF0MMReg\:0x644
2-94
PLL_TEST_CNTL
GpuF0MMReg\:0x79C
2-94
CG_TC_JTAG_0
GpuF0MMReg\:0x7A0
2-94
CG_TC_JTAG_1
GpuF0MMReg\:0x7A4
2-95
CG_MISC_REG
GpuF0MMReg\:0x7C8
2-95
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-9
A.6
Display Contoller Registers Stored by Name
Table A-5 Display Contoller Registers Sorted by Name
Register Name
Address
Page
ATTRDR
GpuF0MMReg\:0x3C1
VGA_IO\:0x3C1
2-153
ATTRDW
GpuF0MMReg\:0x3C0
VGA_IO\:0x3C0
2-153
ATTRX
GpuF0MMReg\:0x3C0
VGA_IO\:0x3C0
2-152
GpuF0MMReg\:0x7ED0
2-325
CRTC8_DATA
GpuF0MMReg\:0x3B5
GpuF0MMReg\:0x3D5
VGA_IO\:0x3B5
VGA_IO\:0x3D5
2-143
CRTC8_IDX
GpuF0MMReg\:0x3B4
GpuF0MMReg\:0x3D4
VGA_IO\:0x3B4
VGA_IO\:0x3D4
2-143
D1_MVP_AFR_FLIP_FIFO_CNTL
GpuF0MMReg\:0x6518
2-206
D1_MVP_AFR_FLIP_MODE
GpuF0MMReg\:0x6514
2-206
D1_MVP_FLIP_LINE_NUM_INSERT
GpuF0MMReg\:0x651C
2-207
D1COLOR_MATRIX_COEF_1_1
GpuF0MMReg\:0x6384
2-191
D1COLOR_MATRIX_COEF_1_2
GpuF0MMReg\:0x6388
2-192
D1COLOR_MATRIX_COEF_1_3
GpuF0MMReg\:0x638C
2-192
D1COLOR_MATRIX_COEF_1_4
GpuF0MMReg\:0x6390
2-192
D1COLOR_MATRIX_COEF_2_1
GpuF0MMReg\:0x6394
2-192
D1COLOR_MATRIX_COEF_2_2
GpuF0MMReg\:0x6398
2-193
D1COLOR_MATRIX_COEF_2_3
GpuF0MMReg\:0x639C
2-193
D1COLOR_MATRIX_COEF_2_4
GpuF0MMReg\:0x63A0
2-193
D1COLOR_MATRIX_COEF_3_1
GpuF0MMReg\:0x63A4
2-193
D1COLOR_MATRIX_COEF_3_2
GpuF0MMReg\:0x63A8
2-194
D1COLOR_MATRIX_COEF_3_3
GpuF0MMReg\:0x63AC
2-194
D1COLOR_MATRIX_COEF_3_4
GpuF0MMReg\:0x63B0
2-194
D1COLOR_SPACE_CONVERT
GpuF0MMReg\:0x613C
2-194
D1CRTC_BLACK_COLOR
GpuF0MMReg\:0x6098
2-264
CAPTURE_START_STATUS
D1CRTC_BLANK_CONTROL
GpuF0MMReg\:0x6084
2-262
D1CRTC_BLANK_DATA_COLOR
GpuF0MMReg\:0x6090
2-263
D1CRTC_CONTROL
GpuF0MMReg\:0x6080
2-262
D1CRTC_COUNT_CONTROL
GpuF0MMReg\:0x60B4
2-265
D1CRTC_COUNT_RESET
GpuF0MMReg\:0x60B0
2-265
D1CRTC_DOUBLE_BUFFER_CONTROL
GpuF0MMReg\:0x60EC
2-269
D1CRTC_FLOW_CONTROL
GpuF0MMReg\:0x6074
2-260
D1CRTC_FORCE_COUNT_NOW_CNTL
GpuF0MMReg\:0x6070
2-260
D1CRTC_H_BLANK_START_END
GpuF0MMReg\:0x6004
2-254
D1CRTC_H_SYNC_A
GpuF0MMReg\:0x6008
2-255
D1CRTC_H_SYNC_A_CNTL
GpuF0MMReg\:0x600C
2-255
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-10
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
D1CRTC_H_SYNC_B
Page
GpuF0MMReg\:0x6010
2-255
D1CRTC_H_SYNC_B_CNTL
GpuF0MMReg\:0x6014
2-256
D1CRTC_H_TOTAL
GpuF0MMReg\:0x6000
2-254
D1CRTC_INTERLACE_CONTROL
GpuF0MMReg\:0x6088
2-263
D1CRTC_INTERLACE_STATUS
GpuF0MMReg\:0x608C
2-263
D1CRTC_INTERRUPT_CONTROL
GpuF0MMReg\:0x60DC
2-268
D1CRTC_MANUAL_FORCE_VSYNC_NEXT_LINE
GpuF0MMReg\:0x60B8
2-266
D1CRTC_MVP_BLACK_KEYER
GpuF0MMReg\:0x6058
2-204
D1CRTC_MVP_CONTROL1
GpuF0MMReg\:0x6038
2-201
D1CRTC_MVP_CONTROL2
GpuF0MMReg\:0x603C
2-202
D1CRTC_MVP_CONTROL3
GpuF0MMReg\:0x6850
2-205
D1CRTC_MVP_CRC_CNTL
GpuF0MMReg\:0x6840
2-204
D1CRTC_MVP_CRC_RESULT
GpuF0MMReg\:0x6844
2-205
D1CRTC_MVP_CRC2_CNTL
GpuF0MMReg\:0x6848
2-205
D1CRTC_MVP_CRC2_RESULT
GpuF0MMReg\:0x684C
2-205
D1CRTC_MVP_FIFO_CONTROL
GpuF0MMReg\:0x6040
2-202
D1CRTC_MVP_FIFO_STATUS
GpuF0MMReg\:0x6044
2-202
D1CRTC_MVP_INBAND_CNTL_CAP
GpuF0MMReg\:0x604C
2-203
D1CRTC_MVP_INBAND_CNTL_INSERT
GpuF0MMReg\:0x6050
2-203
D1CRTC_MVP_INBAND_CNTL_INSERT_TIMER
GpuF0MMReg\:0x6054
2-203
D1CRTC_MVP_RECEIVE_CNT_CNTL1
GpuF0MMReg\:0x6854
2-206
D1CRTC_MVP_RECEIVE_CNT_CNTL2
GpuF0MMReg\:0x6858
2-206
D1CRTC_MVP_SLAVE_STATUS
GpuF0MMReg\:0x6048
2-203
D1CRTC_MVP_STATUS
GpuF0MMReg\:0x605C
2-204
D1CRTC_OVERSCAN_COLOR
GpuF0MMReg\:0x6094
2-264
D1CRTC_PIXEL_DATA_READBACK
GpuF0MMReg\:0x6078
2-261
D1CRTC_SNAPSHOT_CONTROL
GpuF0MMReg\:0x60CC
2-267
D1CRTC_SNAPSHOT_FRAME
GpuF0MMReg\:0x60D4
2-267
D1CRTC_SNAPSHOT_POSITION
GpuF0MMReg\:0x60D0
2-267
D1CRTC_SNAPSHOT_STATUS
GpuF0MMReg\:0x60C8
2-267
D1CRTC_START_LINE_CONTROL
GpuF0MMReg\:0x60D8
2-268
D1CRTC_STATUS
GpuF0MMReg\:0x609C
2-264
D1CRTC_STATUS_FRAME_COUNT
GpuF0MMReg\:0x60A4
2-265
D1CRTC_STATUS_HV_COUNT
GpuF0MMReg\:0x60AC
2-265
D1CRTC_STATUS_POSITION
GpuF0MMReg\:0x60A0
2-264
D1CRTC_STATUS_VF_COUNT
GpuF0MMReg\:0x60A8
2-265
D1CRTC_STEREO_CONTROL
GpuF0MMReg\:0x60C4
2-266
D1CRTC_STEREO_FORCE_NEXT_EYE
GpuF0MMReg\:0x607C
2-261
D1CRTC_STEREO_STATUS
GpuF0MMReg\:0x60C0
2-266
D1CRTC_TRIGA_CNTL
GpuF0MMReg\:0x6060
2-257
D1CRTC_TRIGA_MANUAL_TRIG
GpuF0MMReg\:0x6064
2-259
D1CRTC_TRIGB_CNTL
GpuF0MMReg\:0x6068
2-259
D1CRTC_TRIGB_MANUAL_TRIG
GpuF0MMReg\:0x606C
2-260
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-11
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
Page
D1CRTC_UPDATE_LOCK
GpuF0MMReg\:0x60E8
2-269
D1CRTC_V_BLANK_START_END
GpuF0MMReg\:0x6024
2-256
D1CRTC_V_SYNC_A
GpuF0MMReg\:0x6028
2-256
D1CRTC_V_SYNC_A_CNTL
GpuF0MMReg\:0x602C
2-257
D1CRTC_V_SYNC_B
GpuF0MMReg\:0x6030
2-257
D1CRTC_V_SYNC_B_CNTL
GpuF0MMReg\:0x6034
2-257
D1CRTC_V_TOTAL
GpuF0MMReg\:0x6020
2-256
D1CRTC_VERT_SYNC_CONTROL
GpuF0MMReg\:0x60BC
2-266
D1CRTC_VGA_PARAMETER_CAPTURE_MODE
GpuF0MMReg\:0x60F0
2-270
D1CUR_COLOR1
GpuF0MMReg\:0x641C
2-198
D1CUR_COLOR2
GpuF0MMReg\:0x6420
2-198
D1CUR_CONTROL
GpuF0MMReg\:0x6400
2-196
D1CUR_HOT_SPOT
GpuF0MMReg\:0x6418
2-198
D1CUR_POSITION
GpuF0MMReg\:0x6414
2-197
D1CUR_SIZE
GpuF0MMReg\:0x6410
2-197
D1CUR_SURFACE_ADDRESS
GpuF0MMReg\:0x6408
2-197
D1CUR_UPDATE
GpuF0MMReg\:0x6424
2-198
D1GRPH_ALPHA
GpuF0MMReg\:0x6304
2-188
D1GRPH_COLOR_MATRIX_TRANSFORMATION_CNTL
GpuF0MMReg\:0x6380
2-191
D1GRPH_CONTROL
GpuF0MMReg\:0x6104
2-169
D1GRPH_ENABLE
GpuF0MMReg\:0x6100
2-169
D1GRPH_FLIP_CONTROL
GpuF0MMReg\:0x6148
2-175
D1GRPH_KEY_RANGE_ALPHA
GpuF0MMReg\:0x631C
2-190
D1GRPH_KEY_RANGE_BLUE
GpuF0MMReg\:0x6318
2-189
D1GRPH_KEY_RANGE_GREEN
GpuF0MMReg\:0x6314
2-189
D1GRPH_KEY_RANGE_RED
GpuF0MMReg\:0x6310
2-189
D1GRPH_LUT_SEL
GpuF0MMReg\:0x6108
2-170
D1GRPH_PITCH
GpuF0MMReg\:0x6120
2-172
D1GRPH_PRIMARY_SURFACE_ADDRESS
GpuF0MMReg\:0x6110
2-171
D1GRPH_SECONDARY_SURFACE_ADDRESS
GpuF0MMReg\:0x6118
2-172
D1GRPH_SURFACE_ADDRESS_INUSE
GpuF0MMReg\:0x614C
2-175
D1GRPH_SURFACE_OFFSET_X
GpuF0MMReg\:0x6124
2-172
D1GRPH_SURFACE_OFFSET_Y
GpuF0MMReg\:0x6128
2-172
D1GRPH_SWAP_CNTL
GpuF0MMReg\:0x610C
2-171
D1GRPH_UPDATE
GpuF0MMReg\:0x6144
2-173
D1GRPH_X_END
GpuF0MMReg\:0x6134
2-173
D1GRPH_X_START
GpuF0MMReg\:0x612C
2-172
D1GRPH_Y_END
GpuF0MMReg\:0x6138
2-173
D1GRPH_Y_START
GpuF0MMReg\:0x6130
2-173
D1ICON_COLOR1
GpuF0MMReg\:0x6458
2-200
D1ICON_COLOR2
GpuF0MMReg\:0x645C
2-200
D1ICON_CONTROL
GpuF0MMReg\:0x6440
2-199
D1ICON_SIZE
GpuF0MMReg\:0x6450
2-200
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-12
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
D1ICON_START_POSITION
GpuF0MMReg\:0x6454
Page
2-200
D1ICON_SURFACE_ADDRESS
GpuF0MMReg\:0x6448
2-199
D1ICON_UPDATE
GpuF0MMReg\:0x6460
2-201
D1MODE_MASTER_UPDATE_LOCK
GpuF0MMReg\:0x60E0
2-268
D1MODE_MASTER_UPDATE_MODE
GpuF0MMReg\:0x60E4
2-269
D1OVL_ALPHA
GpuF0MMReg\:0x6308
2-188
D1OVL_ALPHA_CONTROL
GpuF0MMReg\:0x630C
2-188
D1OVL_COLOR_MATRIX_TRANSFORMATION_CNTL
GpuF0MMReg\:0x6140
2-180
D1OVL_CONTROL1
GpuF0MMReg\:0x6184
2-175
D1OVL_CONTROL2
GpuF0MMReg\:0x6188
2-176
D1OVL_DFQ_CONTROL
GpuF0MMReg\:0x61B4
2-179
D1OVL_DFQ_STATUS
GpuF0MMReg\:0x61B8
2-180
D1OVL_ENABLE
GpuF0MMReg\:0x6180
2-175
D1OVL_END
GpuF0MMReg\:0x61A8
2-178
D1OVL_KEY_ALPHA
GpuF0MMReg\:0x632C
2-191
D1OVL_KEY_CONTROL
GpuF0MMReg\:0x6300
2-187
D1OVL_KEY_RANGE_BLUE_CB
GpuF0MMReg\:0x6328
2-190
D1OVL_KEY_RANGE_GREEN_Y
GpuF0MMReg\:0x6324
2-190
D1OVL_KEY_RANGE_RED_CR
GpuF0MMReg\:0x6320
2-190
D1OVL_MATRIX_COEF_1_1
GpuF0MMReg\:0x6204
2-180
D1OVL_MATRIX_COEF_1_2
GpuF0MMReg\:0x6208
2-181
D1OVL_MATRIX_COEF_1_3
GpuF0MMReg\:0x620C
2-181
D1OVL_MATRIX_COEF_1_4
GpuF0MMReg\:0x6210
2-181
D1OVL_MATRIX_COEF_2_1
GpuF0MMReg\:0x6214
2-181
D1OVL_MATRIX_COEF_2_2
GpuF0MMReg\:0x6218
2-182
D1OVL_MATRIX_COEF_2_3
GpuF0MMReg\:0x621C
2-182
D1OVL_MATRIX_COEF_2_4
GpuF0MMReg\:0x6220
2-182
D1OVL_MATRIX_COEF_3_1
GpuF0MMReg\:0x6224
2-182
D1OVL_MATRIX_COEF_3_2
GpuF0MMReg\:0x6228
2-183
D1OVL_MATRIX_COEF_3_3
GpuF0MMReg\:0x622C
2-183
D1OVL_MATRIX_COEF_3_4
GpuF0MMReg\:0x6230
2-183
D1OVL_MATRIX_TRANSFORM_EN
GpuF0MMReg\:0x6200
2-180
D1OVL_PITCH
GpuF0MMReg\:0x6198
2-177
D1OVL_PWL_0TOF
GpuF0MMReg\:0x6284
2-183
D1OVL_PWL_100TO13F
GpuF0MMReg\:0x629C
2-185
D1OVL_PWL_10TO1F
GpuF0MMReg\:0x6288
2-184
D1OVL_PWL_140TO17F
GpuF0MMReg\:0x62A0
2-185
D1OVL_PWL_180TO1BF
GpuF0MMReg\:0x62A4
2-185
D1OVL_PWL_1C0TO1FF
GpuF0MMReg\:0x62A8
2-185
D1OVL_PWL_200TO23F
GpuF0MMReg\:0x62AC
2-186
D1OVL_PWL_20TO3F
GpuF0MMReg\:0x628C
2-184
D1OVL_PWL_240TO27F
GpuF0MMReg\:0x62B0
2-186
D1OVL_PWL_280TO2BF
GpuF0MMReg\:0x62B4
2-186
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-13
Table A-5 Display Contoller Registers Sorted by Name
Register Name
(Continued)
Address
Page
D1OVL_PWL_2C0TO2FF
GpuF0MMReg\:0x62B8
2-186
D1OVL_PWL_300TO33F
GpuF0MMReg\:0x62BC
2-186
D1OVL_PWL_340TO37F
GpuF0MMReg\:0x62C0
2-187
D1OVL_PWL_380TO3BF
GpuF0MMReg\:0x62C4
2-187
D1OVL_PWL_3C0TO3FF
GpuF0MMReg\:0x62C8
2-187
D1OVL_PWL_40TO7F
GpuF0MMReg\:0x6290
2-184
D1OVL_PWL_80TOBF
GpuF0MMReg\:0x6294
2-184
D1OVL_PWL_C0TOFF
GpuF0MMReg\:0x6298
2-185
D1OVL_PWL_TRANSFORM_EN
GpuF0MMReg\:0x6280
2-183
D1OVL_RT_BAND_POSITION
GpuF0MMReg\:0x6508
2-195
D1OVL_RT_PROCEED_COND
GpuF0MMReg\:0x650C
2-195
D1OVL_RT_SKEWCOMMAND
GpuF0MMReg\:0x6500
2-195
D1OVL_RT_SKEWCONTROL
GpuF0MMReg\:0x6504
2-195
D1OVL_RT_STAT
GpuF0MMReg\:0x6510
2-196
D1OVL_START
GpuF0MMReg\:0x61A4
2-178
D1OVL_SURFACE_ADDRESS
GpuF0MMReg\:0x6190
2-177
D1OVL_SURFACE_ADDRESS_INUSE
GpuF0MMReg\:0x61B0
2-179
D1OVL_SURFACE_OFFSET_X
GpuF0MMReg\:0x619C
2-178
D1OVL_SURFACE_OFFSET_Y
GpuF0MMReg\:0x61A0
2-178
D1OVL_SWAP_CNTL
GpuF0MMReg\:0x618C
2-177
D1OVL_UPDATE
GpuF0MMReg\:0x61AC
2-178
GpuF0MMReg\:0x330
2-162
D1VGA_CONTROL
D2_MVP_AFR_FLIP_FIFO_CNTL
GpuF0MMReg\:0x65EC
2-240
D2_MVP_AFR_FLIP_MODE
GpuF0MMReg\:0x65E8
2-240
D2_MVP_FLIP_LINE_NUM_INSERT
GpuF0MMReg\:0x65F0
2-240
D2COLOR_MATRIX_COEF_1_1
GpuF0MMReg\:0x6B84
2-230
D2COLOR_MATRIX_COEF_1_2
GpuF0MMReg\:0x6B88
2-230
D2COLOR_MATRIX_COEF_1_3
GpuF0MMReg\:0x6B8C
2-230
D2COLOR_MATRIX_COEF_1_4
GpuF0MMReg\:0x6B90
2-230
D2COLOR_MATRIX_COEF_2_1
GpuF0MMReg\:0x6B94
2-231
D2COLOR_MATRIX_COEF_2_2
GpuF0MMReg\:0x6B98
2-231
D2COLOR_MATRIX_COEF_2_3
GpuF0MMReg\:0x6B9C
2-231
D2COLOR_MATRIX_COEF_2_4
GpuF0MMReg\:0x6BA0
2-231
D2COLOR_MATRIX_COEF_3_1
GpuF0MMReg\:0x6BA4
2-232
D2COLOR_MATRIX_COEF_3_2
GpuF0MMReg\:0x6BA8
2-232
D2COLOR_MATRIX_COEF_3_3
GpuF0MMReg\:0x6BAC
2-232
D2COLOR_MATRIX_COEF_3_4
GpuF0MMReg\:0x6BB0
2-232
D2COLOR_SPACE_CONVERT
GpuF0MMReg\:0x693C
2-233
D2CRTC_BLACK_COLOR
GpuF0MMReg\:0x6898
2-280
D2CRTC_BLANK_CONTROL
GpuF0MMReg\:0x6884
2-278
D2CRTC_BLANK_DATA_COLOR
GpuF0MMReg\:0x6890
2-279
D2CRTC_CONTROL
GpuF0MMReg\:0x6880
2-278
D2CRTC_COUNT_CONTROL
GpuF0MMReg\:0x68B4
2-281
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-14
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
Page
D2CRTC_COUNT_RESET
GpuF0MMReg\:0x68B0
2-281
D2CRTC_DOUBLE_BUFFER_CONTROL
GpuF0MMReg\:0x68EC
2-285
D2CRTC_FLOW_CONTROL
GpuF0MMReg\:0x6874
2-276
D2CRTC_FORCE_COUNT_NOW_CNTL
GpuF0MMReg\:0x6870
2-276
D2CRTC_H_BLANK_START_END
GpuF0MMReg\:0x6804
2-270
D2CRTC_H_SYNC_A
GpuF0MMReg\:0x6808
2-270
D2CRTC_H_SYNC_A_CNTL
GpuF0MMReg\:0x680C
2-271
D2CRTC_H_SYNC_B
GpuF0MMReg\:0x6810
2-271
D2CRTC_H_SYNC_B_CNTL
GpuF0MMReg\:0x6814
2-271
D2CRTC_H_TOTAL
GpuF0MMReg\:0x6800
2-270
D2CRTC_INTERLACE_CONTROL
GpuF0MMReg\:0x6888
2-279
D2CRTC_INTERLACE_STATUS
GpuF0MMReg\:0x688C
2-279
D2CRTC_INTERRUPT_CONTROL
GpuF0MMReg\:0x68DC
2-284
D2CRTC_MANUAL_FORCE_VSYNC_NEXT_LINE
GpuF0MMReg\:0x68B8
2-282
D2CRTC_MVP_INBAND_CNTL_INSERT
GpuF0MMReg\:0x6838
2-204
D2CRTC_MVP_INBAND_CNTL_INSERT_TIMER
GpuF0MMReg\:0x683C
2-204
D2CRTC_MVP_STATUS
GpuF0MMReg\:0x685C
2-239
D2CRTC_OVERSCAN_COLOR
GpuF0MMReg\:0x6894
2-280
D2CRTC_PIXEL_DATA_READBACK
GpuF0MMReg\:0x6878
2-277
D2CRTC_SNAPSHOT_CONTROL
GpuF0MMReg\:0x68CC
2-283
D2CRTC_SNAPSHOT_FRAME
GpuF0MMReg\:0x68D4
2-283
D2CRTC_SNAPSHOT_POSITION
GpuF0MMReg\:0x68D0
2-283
D2CRTC_SNAPSHOT_STATUS
GpuF0MMReg\:0x68C8
2-283
D2CRTC_START_LINE_CONTROL
GpuF0MMReg\:0x68D8
2-283
D2CRTC_STATUS
GpuF0MMReg\:0x689C
2-280
D2CRTC_STATUS_FRAME_COUNT
GpuF0MMReg\:0x68A4
2-281
D2CRTC_STATUS_HV_COUNT
GpuF0MMReg\:0x68AC
2-281
D2CRTC_STATUS_POSITION
GpuF0MMReg\:0x68A0
2-280
D2CRTC_STATUS_VF_COUNT
GpuF0MMReg\:0x68A8
2-281
D2CRTC_STEREO_CONTROL
GpuF0MMReg\:0x68C4
2-282
D2CRTC_STEREO_FORCE_NEXT_EYE
GpuF0MMReg\:0x687C
2-277
D2CRTC_STEREO_STATUS
GpuF0MMReg\:0x68C0
2-282
D2CRTC_TRIGA_CNTL
GpuF0MMReg\:0x6860
2-273
D2CRTC_TRIGA_MANUAL_TRIG
GpuF0MMReg\:0x6864
2-275
D2CRTC_TRIGB_CNTL
GpuF0MMReg\:0x6868
2-275
D2CRTC_TRIGB_MANUAL_TRIG
GpuF0MMReg\:0x686C
2-276
D2CRTC_UPDATE_LOCK
GpuF0MMReg\:0x68E8
2-285
D2CRTC_V_BLANK_START_END
GpuF0MMReg\:0x6824
2-272
D2CRTC_V_SYNC_A
GpuF0MMReg\:0x6828
2-272
D2CRTC_V_SYNC_A_CNTL
GpuF0MMReg\:0x682C
2-273
D2CRTC_V_SYNC_B
GpuF0MMReg\:0x6830
2-273
D2CRTC_V_SYNC_B_CNTL
GpuF0MMReg\:0x6834
2-273
D2CRTC_V_TOTAL
GpuF0MMReg\:0x6820
2-272
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-15
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
Page
D2CRTC_VBI_END
GpuF0MMReg\:0x6818
2-272
D2CRTC_VERT_SYNC_CONTROL
GpuF0MMReg\:0x68BC
2-282
D2CRTC_VGA_PARAMETER_CAPTURE_MODE
GpuF0MMReg\:0x68F0
2-285
D2CUR_COLOR1
GpuF0MMReg\:0x6C1C
2-236
D2CUR_COLOR2
GpuF0MMReg\:0x6C20
2-236
D2CUR_CONTROL
GpuF0MMReg\:0x6C00
2-235
D2CUR_HOT_SPOT
GpuF0MMReg\:0x6C18
2-236
D2CUR_POSITION
GpuF0MMReg\:0x6C14
2-236
D2CUR_SIZE
GpuF0MMReg\:0x6C10
2-235
D2CUR_SURFACE_ADDRESS
GpuF0MMReg\:0x6C08
2-235
D2CUR_UPDATE
GpuF0MMReg\:0x6C24
2-237
D2GRPH_ALPHA
GpuF0MMReg\:0x6B04
2-226
D2GRPH_COLOR_MATRIX_TRANSFORMATION_CNTL
GpuF0MMReg\:0x6B80
2-229
D2GRPH_CONTROL
GpuF0MMReg\:0x6904
2-207
D2GRPH_ENABLE
GpuF0MMReg\:0x6900
2-207
D2GRPH_FLIP_CONTROL
GpuF0MMReg\:0x6948
2-213
D2GRPH_KEY_RANGE_ALPHA
GpuF0MMReg\:0x6B1C
2-228
D2GRPH_KEY_RANGE_BLUE
GpuF0MMReg\:0x6B18
2-228
D2GRPH_KEY_RANGE_GREEN
GpuF0MMReg\:0x6B14
2-227
D2GRPH_KEY_RANGE_RED
GpuF0MMReg\:0x6B10
2-227
D2GRPH_LUT_SEL
GpuF0MMReg\:0x6908
2-209
D2GRPH_PITCH
GpuF0MMReg\:0x6920
2-210
D2GRPH_PRIMARY_SURFACE_ADDRESS
GpuF0MMReg\:0x6910
2-210
D2GRPH_SECONDARY_SURFACE_ADDRESS
GpuF0MMReg\:0x6918
2-210
D2GRPH_SURFACE_ADDRESS_INUSE
GpuF0MMReg\:0x694C
2-213
D2GRPH_SURFACE_OFFSET_X
GpuF0MMReg\:0x6924
2-211
D2GRPH_SURFACE_OFFSET_Y
GpuF0MMReg\:0x6928
2-211
D2GRPH_SWAP_CNTL
GpuF0MMReg\:0x690C
2-209
D2GRPH_UPDATE
GpuF0MMReg\:0x6944
2-212
D2GRPH_X_END
GpuF0MMReg\:0x6934
2-212
D2GRPH_X_START
GpuF0MMReg\:0x692C
2-211
D2GRPH_Y_END
GpuF0MMReg\:0x6938
2-212
D2GRPH_Y_START
GpuF0MMReg\:0x6930
2-211
D2ICON_COLOR1
GpuF0MMReg\:0x6C58
2-238
D2ICON_COLOR2
GpuF0MMReg\:0x6C5C
2-238
D2ICON_CONTROL
GpuF0MMReg\:0x6C40
2-237
D2ICON_SIZE
GpuF0MMReg\:0x6C50
2-238
D2ICON_START_POSITION
GpuF0MMReg\:0x6C54
2-238
D2ICON_SURFACE_ADDRESS
GpuF0MMReg\:0x6C48
2-238
D2ICON_UPDATE
GpuF0MMReg\:0x6C60
2-239
D2MODE_MASTER_UPDATE_LOCK
GpuF0MMReg\:0x68E0
2-284
D2MODE_MASTER_UPDATE_MODE
GpuF0MMReg\:0x68E4
2-284
D2OVL_ALPHA
GpuF0MMReg\:0x6B08
2-226
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-16
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
D2OVL_ALPHA_CONTROL
GpuF0MMReg\:0x6B0C
Page
2-227
D2OVL_COLOR_MATRIX_TRANSFORMATION_CNTL
GpuF0MMReg\:0x6940
2-221
D2OVL_CONTROL1
GpuF0MMReg\:0x6984
2-214
D2OVL_CONTROL2
GpuF0MMReg\:0x6988
2-215
D2OVL_DFQ_CONTROL
GpuF0MMReg\:0x69B4
2-218
D2OVL_DFQ_STATUS
GpuF0MMReg\:0x69B8
2-218
D2OVL_ENABLE
GpuF0MMReg\:0x6980
2-214
D2OVL_END
GpuF0MMReg\:0x69A8
2-217
D2OVL_KEY_ALPHA
GpuF0MMReg\:0x6B2C
2-229
D2OVL_KEY_CONTROL
GpuF0MMReg\:0x6B00
2-226
D2OVL_KEY_RANGE_BLUE_CB
GpuF0MMReg\:0x6B28
2-229
D2OVL_KEY_RANGE_GREEN_Y
GpuF0MMReg\:0x6B24
2-229
D2OVL_KEY_RANGE_RED_CR
GpuF0MMReg\:0x6B20
2-228
D2OVL_MATRIX_COEF_1_1
GpuF0MMReg\:0x6A04
2-219
D2OVL_MATRIX_COEF_1_2
GpuF0MMReg\:0x6A08
2-219
D2OVL_MATRIX_COEF_1_3
GpuF0MMReg\:0x6A0C
2-219
D2OVL_MATRIX_COEF_1_4
GpuF0MMReg\:0x6A10
2-219
D2OVL_MATRIX_COEF_2_1
GpuF0MMReg\:0x6A14
2-219
D2OVL_MATRIX_COEF_2_2
GpuF0MMReg\:0x6A18
2-220
D2OVL_MATRIX_COEF_2_3
GpuF0MMReg\:0x6A1C
2-220
D2OVL_MATRIX_COEF_2_4
GpuF0MMReg\:0x6A20
2-220
D2OVL_MATRIX_COEF_3_1
GpuF0MMReg\:0x6A24
2-220
D2OVL_MATRIX_COEF_3_2
GpuF0MMReg\:0x6A28
2-221
D2OVL_MATRIX_COEF_3_3
GpuF0MMReg\:0x6A2C
2-221
D2OVL_MATRIX_COEF_3_4
GpuF0MMReg\:0x6A30
2-221
D2OVL_MATRIX_TRANSFORM_EN
GpuF0MMReg\:0x6A00
2-218
D2OVL_PITCH
GpuF0MMReg\:0x6998
2-216
D2OVL_PWL_0TOF
GpuF0MMReg\:0x6A84
2-222
D2OVL_PWL_100TO13F
GpuF0MMReg\:0x6A9C
2-223
D2OVL_PWL_10TO1F
GpuF0MMReg\:0x6A88
2-222
D2OVL_PWL_140TO17F
GpuF0MMReg\:0x6AA0
2-223
D2OVL_PWL_180TO1BF
GpuF0MMReg\:0x6AA4
2-224
D2OVL_PWL_1C0TO1FF
GpuF0MMReg\:0x6AA8
2-224
D2OVL_PWL_200TO23F
GpuF0MMReg\:0x6AAC
2-224
D2OVL_PWL_20TO3F
GpuF0MMReg\:0x6A8C
2-222
D2OVL_PWL_240TO27F
GpuF0MMReg\:0x6AB0
2-224
D2OVL_PWL_280TO2BF
GpuF0MMReg\:0x6AB4
2-224
D2OVL_PWL_2C0TO2FF
GpuF0MMReg\:0x6AB8
2-225
D2OVL_PWL_300TO33F
GpuF0MMReg\:0x6ABC
2-225
D2OVL_PWL_340TO37F
GpuF0MMReg\:0x6AC0
2-225
D2OVL_PWL_380TO3BF
GpuF0MMReg\:0x6AC4
2-225
D2OVL_PWL_3C0TO3FF
GpuF0MMReg\:0x6AC8
2-225
D2OVL_PWL_40TO7F
GpuF0MMReg\:0x6A90
2-222
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-17
Table A-5 Display Contoller Registers Sorted by Name
Register Name
D2OVL_PWL_80TOBF
(Continued)
Address
GpuF0MMReg\:0x6A94
Page
2-223
D2OVL_PWL_C0TOFF
GpuF0MMReg\:0x6A98
2-223
D2OVL_PWL_TRANSFORM_EN
GpuF0MMReg\:0x6A80
2-222
D2OVL_RT_BAND_POSITION
GpuF0MMReg\:0x6D08
2-234
D2OVL_RT_PROCEED_COND
GpuF0MMReg\:0x6D0C
2-234
D2OVL_RT_SKEWCOMMAND
GpuF0MMReg\:0x6D00
2-233
D2OVL_RT_SKEWCONTROL
GpuF0MMReg\:0x6D04
2-233
D2OVL_RT_STAT
GpuF0MMReg\:0x6D10
2-234
D2OVL_START
GpuF0MMReg\:0x69A4
2-217
D2OVL_SURFACE_ADDRESS
GpuF0MMReg\:0x6990
2-216
D2OVL_SURFACE_ADDRESS_INUSE
GpuF0MMReg\:0x69B0
2-218
D2OVL_SURFACE_OFFSET_X
GpuF0MMReg\:0x699C
2-216
D2OVL_SURFACE_OFFSET_Y
GpuF0MMReg\:0x69A0
2-216
D2OVL_SWAP_CNTL
GpuF0MMReg\:0x698C
2-215
GpuF0MMReg\:0x69AC
2-217
D2VGA_CONTROL
D2OVL_UPDATE
GpuF0MMReg\:0x338
2-163
DAC_DATA
GpuF0MMReg\:0x3C9
VGA_IO\:0x3C9
2-140
DAC_MASK
GpuF0MMReg\:0x3C6
VGA_IO\:0x3C6
2-140
DAC_R_INDEX
GpuF0MMReg\:0x3C7
VGA_IO\:0x3C7
2-140
DAC_W_INDEX
GpuF0MMReg\:0x3C8
VGA_IO\:0x3C8
2-140
DACA_AUTODETECT_CONTROL
GpuF0MMReg\:0x7828
2-288
DACA_AUTODETECT_CONTROL2
GpuF0MMReg\:0x782C
2-288
DACA_AUTODETECT_CONTROL3
GpuF0MMReg\:0x7830
2-288
DACA_AUTODETECT_INT_CONTROL
GpuF0MMReg\:0x7838
2-289
DACA_AUTODETECT_STATUS
GpuF0MMReg\:0x7834
2-289
DACA_COMPARATOR_ENABLE
GpuF0MMReg\:0x785C
2-291
DACA_COMPARATOR_OUTPUT
GpuF0MMReg\:0x7860
2-291
DACA_CONTROL1
GpuF0MMReg\:0x7854
2-290
DACA_CONTROL2
GpuF0MMReg\:0x7858
2-290
DACA_CRC_CONTROL
GpuF0MMReg\:0x780C
2-286
DACA_CRC_EN
GpuF0MMReg\:0x7808
2-286
DACA_CRC_SIG_CONTROL
GpuF0MMReg\:0x781C
2-287
DACA_CRC_SIG_CONTROL_MASK
GpuF0MMReg\:0x7814
2-287
DACA_CRC_SIG_RGB
GpuF0MMReg\:0x7818
2-287
DACA_CRC_SIG_RGB_MASK
GpuF0MMReg\:0x7810
2-287
DACA_DFT_CONFIG
GpuF0MMReg\:0x786C
2-292
DACA_FORCE_DATA
GpuF0MMReg\:0x7840
2-290
DACA_FORCE_OUTPUT_CNTL
GpuF0MMReg\:0x783C
2-289
DACA_POWERDOWN
GpuF0MMReg\:0x7850
2-290
DACA_PWR_CNTL
GpuF0MMReg\:0x7868
2-292
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-18
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
DACA_SOURCE_SELECT
Page
GpuF0MMReg\:0x7804
2-286
DACA_SYNC_SELECT
GpuF0MMReg\:0x7824
2-287
DACA_SYNC_TRISTATE_CONTROL
GpuF0MMReg\:0x7820
2-287
DACA_TEST_ENABLE
GpuF0MMReg\:0x7864
2-292
DACB_AUTODETECT_CONTROL
GpuF0MMReg\:0x7A28
2-294
DACB_AUTODETECT_CONTROL2
GpuF0MMReg\:0x7A2C
2-295
DACB_AUTODETECT_CONTROL3
GpuF0MMReg\:0x7A30
2-295
DACB_AUTODETECT_INT_CONTROL
GpuF0MMReg\:0x7A38
2-296
DACB_AUTODETECT_STATUS
GpuF0MMReg\:0x7A34
2-295
DACB_COMPARATOR_ENABLE
GpuF0MMReg\:0x7A5C
2-297
DACB_COMPARATOR_OUTPUT
GpuF0MMReg\:0x7A60
2-298
DACB_CONTROL1
GpuF0MMReg\:0x7A54
2-297
DACB_CONTROL2
GpuF0MMReg\:0x7A58
2-297
DACB_CRC_CONTROL
GpuF0MMReg\:0x7A0C
2-293
DACB_CRC_EN
GpuF0MMReg\:0x7A08
2-293
DACB_CRC_SIG_CONTROL
GpuF0MMReg\:0x7A1C
2-294
DACB_CRC_SIG_CONTROL_MASK
GpuF0MMReg\:0x7A14
2-293
DACB_CRC_SIG_RGB
GpuF0MMReg\:0x7A18
2-294
DACB_CRC_SIG_RGB_MASK
GpuF0MMReg\:0x7A10
2-293
DACB_ENABLE
GpuF0MMReg\:0x7A00
2-292
DACB_FORCE_DATA
GpuF0MMReg\:0x7A40
2-296
DACB_FORCE_OUTPUT_CNTL
GpuF0MMReg\:0x7A3C
2-296
DACB_POWERDOWN
GpuF0MMReg\:0x7A50
2-296
DACB_PWR_CNTL
GpuF0MMReg\:0x7A68
2-298
DACB_SOURCE_SELECT
GpuF0MMReg\:0x7A04
2-292
DACB_SYNC_SELECT
GpuF0MMReg\:0x7A24
2-294
DACB_SYNC_TRISTATE_CONTROL
GpuF0MMReg\:0x7A20
2-294
DACB_TEST_ENABLE
GpuF0MMReg\:0x7A64
2-298
DC_CRTC_MASTER_EN
GpuF0MMReg\:0x60F8
2-254
DC_CRTC_TV_CONTROL
GpuF0MMReg\:0x60FC
2-254
DC_GENERICA
GpuF0MMReg\:0x7DC0
2-320
DC_GENERICB
GpuF0MMReg\:0x7DC4
2-320
DC_GPIO_DDC1_A
GpuF0MMReg\:0x7E44
2-330
DC_GPIO_DDC1_EN
GpuF0MMReg\:0x7E48
2-331
DC_GPIO_DDC1_MASK
GpuF0MMReg\:0x7E40
2-330
DC_GPIO_DDC1_Y
GpuF0MMReg\:0x7E4C
2-331
DC_GPIO_DDC2_A
GpuF0MMReg\:0x7E54
2-331
DC_GPIO_DDC2_EN
GpuF0MMReg\:0x7E58
2-332
DC_GPIO_DDC2_MASK
GpuF0MMReg\:0x7E50
2-331
DC_GPIO_DDC2_Y
GpuF0MMReg\:0x7E5C
2-332
DC_GPIO_DDC3_A
GpuF0MMReg\:0x7E64
2-332
DC_GPIO_DDC3_EN
GpuF0MMReg\:0x7E68
2-333
DC_GPIO_DDC3_MASK
GpuF0MMReg\:0x7E60
2-332
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-19
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
Page
DC_GPIO_DDC3_Y
GpuF0MMReg\:0x7E6C
2-333
DC_GPIO_DDC4_A
GpuF0MMReg\:0x7E04
2-328
DC_GPIO_DDC4_EN
GpuF0MMReg\:0x7E08
2-328
DC_GPIO_DDC4_MASK
GpuF0MMReg\:0x7E00
2-328
DC_GPIO_DDC4_Y
GpuF0MMReg\:0x7E0C
2-328
DC_GPIO_DEBUG
GpuF0MMReg\:0x7E2C
2-328
DC_GPIO_DVODATA_A
GpuF0MMReg\:0x7E34
2-329
DC_GPIO_DVODATA_EN
GpuF0MMReg\:0x7E38
2-329
DC_GPIO_DVODATA_MASK
GpuF0MMReg\:0x7E30
2-329
DC_GPIO_DVODATA_Y
GpuF0MMReg\:0x7E3C
2-330
DC_GPIO_GENERIC_A
GpuF0MMReg\:0x7DE4
2-327
DC_GPIO_GENERIC_EN
GpuF0MMReg\:0x7DE8
2-327
DC_GPIO_GENERIC_MASK
GpuF0MMReg\:0x7DE0
2-327
DC_GPIO_GENERIC_Y
GpuF0MMReg\:0x7DEC 2-327
DC_GPIO_HPD_A
GpuF0MMReg\:0x7E94
2-335
DC_GPIO_HPD_EN
GpuF0MMReg\:0x7E98
2-336
DC_GPIO_HPD_MASK
GpuF0MMReg\:0x7E90
2-335
DC_GPIO_HPD_Y
GpuF0MMReg\:0x7E9C
2-336
DC_GPIO_PAD_STRENGTH_1
GpuF0MMReg\:0x7ED4
2-337
DC_GPIO_PAD_STRENGTH_2
GpuF0MMReg\:0x7ED8
2-338
DC_GPIO_PWRSEQ_A
GpuF0MMReg\:0x7EA4
2-337
DC_GPIO_PWRSEQ_EN
GpuF0MMReg\:0x7EA8
2-337
DC_GPIO_PWRSEQ_MASK
GpuF0MMReg\:0x7EA0
2-336
DC_GPIO_PWRSEQ_Y
GpuF0MMReg\:0x7EAC
2-337
DC_GPIO_SYNCA_A
GpuF0MMReg\:0x7E74
2-333
DC_GPIO_SYNCA_EN
GpuF0MMReg\:0x7E78
2-334
DC_GPIO_SYNCA_MASK
GpuF0MMReg\:0x7E70
2-333
DC_GPIO_SYNCA_Y
GpuF0MMReg\:0x7E7C
2-334
DC_GPIO_SYNCB_A
GpuF0MMReg\:0x7E84
2-334
DC_GPIO_SYNCB_EN
GpuF0MMReg\:0x7E88
2-335
DC_GPIO_SYNCB_MASK
GpuF0MMReg\:0x7E80
2-334
DC_GPIO_SYNCB_Y
GpuF0MMReg\:0x7E8C
2-335
DC_HOT_PLUG_DETECT_CLOCK_CONTROL
GpuF0MMReg\:0x7D20
2-319
DC_HOT_PLUG_DETECT1_CONTROL
GpuF0MMReg\:0x7D00
2-317
DC_HOT_PLUG_DETECT1_INT_CONTROL
GpuF0MMReg\:0x7D08
2-318
DC_HOT_PLUG_DETECT1_INT_STATUS
GpuF0MMReg\:0x7D04
2-317
DC_HOT_PLUG_DETECT2_CONTROL
GpuF0MMReg\:0x7D10
2-318
DC_HOT_PLUG_DETECT2_INT_CONTROL
GpuF0MMReg\:0x7D18
2-318
DC_HOT_PLUG_DETECT2_INT_STATUS
GpuF0MMReg\:0x7D14
2-318
DC_HOT_PLUG_DETECT3_CONTROL
GpuF0MMReg\:0x7D24
2-319
DC_HOT_PLUG_DETECT3_INT_CONTROL
GpuF0MMReg\:0x7D2C
2-319
DC_HOT_PLUG_DETECT3_INT_STATUS
GpuF0MMReg\:0x7D28
2-319
DC_LUT_30_COLOR
GpuF0MMReg\:0x6494
2-242
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-20
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
DC_LUT_AUTOFILL
Page
GpuF0MMReg\:0x64A0
2-242
DC_LUT_PWL_DATA
GpuF0MMReg\:0x6490
2-241
DC_LUT_READ_PIPE_SELECT
GpuF0MMReg\:0x6498
2-242
DC_LUT_RW_INDEX
GpuF0MMReg\:0x6488
2-241
DC_LUT_RW_MODE
GpuF0MMReg\:0x6484
2-241
DC_LUT_RW_SELECT
GpuF0MMReg\:0x6480
2-240
DC_LUT_SEQ_COLOR
GpuF0MMReg\:0x648C
2-241
DC_LUT_WRITE_EN_MASK
GpuF0MMReg\:0x649C
2-242
DC_LUTA_BLACK_OFFSET_BLUE
GpuF0MMReg\:0x64C4
2-245
DC_LUTA_BLACK_OFFSET_GREEN
GpuF0MMReg\:0x64C8
2-245
DC_LUTA_BLACK_OFFSET_RED
GpuF0MMReg\:0x64CC
2-245
DC_LUTA_CONTROL
GpuF0MMReg\:0x64C0
2-243
DC_LUTA_WHITE_OFFSET_BLUE
GpuF0MMReg\:0x64D0
2-245
DC_LUTA_WHITE_OFFSET_GREEN
GpuF0MMReg\:0x64D4
2-245
DC_LUTA_WHITE_OFFSET_RED
GpuF0MMReg\:0x64D8
2-245
DC_LUTB_BLACK_OFFSET_BLUE
GpuF0MMReg\:0x6CC4
2-248
DC_LUTB_BLACK_OFFSET_GREEN
GpuF0MMReg\:0x6CC8
2-248
DC_LUTB_BLACK_OFFSET_RED
GpuF0MMReg\:0x6CCC 2-248
DC_LUTB_CONTROL
GpuF0MMReg\:0x6CC0
2-246
DC_LUTB_WHITE_OFFSET_BLUE
GpuF0MMReg\:0x6CD0
2-248
DC_LUTB_WHITE_OFFSET_GREEN
GpuF0MMReg\:0x6CD4
2-248
DC_LUTB_WHITE_OFFSET_RED
GpuF0MMReg\:0x6CD8
2-248
DC_MVP_LB_CONTROL
GpuF0MMReg\:0x65F4
2-253
DC_PAD_EXTERN_SIG
GpuF0MMReg\:0x7DCC 2-320
DC_REF_CLK_CNTL
GpuF0MMReg\:0x7DD4 2-321
DCP_CRC_CONTROL
GpuF0MMReg\:0x6C80
2-249
DCP_CRC_MASK
GpuF0MMReg\:0x6C84
2-249
DCP_CRC_P0_CURRENT
GpuF0MMReg\:0x6C88
2-249
DCP_CRC_P0_LAST
GpuF0MMReg\:0x6C90
2-249
DCP_CRC_P1_CURRENT
GpuF0MMReg\:0x6C8C
2-249
DCP_CRC_P1_LAST
GpuF0MMReg\:0x6C94
2-250
DCP_LB_DATA_GAP_BETWEEN_CHUNK
GpuF0MMReg\:0x6CBC 2-253
DCP_MULTI_CHIP_CNTL
GpuF0MMReg\:0x6CA4
2-251
DCP_TILING_CONFIG
GpuF0MMReg\:0x6CA0
2-250
DISP_INTERRUPT_STATUS
GpuF0MMReg\:0x7EDC 2-321
DISP_INTERRUPT_STATUS_CONTINUE
GpuF0MMReg\:0x7EE8
2-323
DISP_TIMER_CONTROL
GpuF0MMReg\:0x7EF0
2-325
DMIF_CONTROL
GpuF0MMReg\:0x6CB0
2-251
DMIF_STATUS
GpuF0MMReg\:0x6CB4
2-252
DOUT_POWER_MANAGEMENT_CNTL
GpuF0MMReg\:0x7EE0
2-324
DVOA_BIT_DEPTH_CONTROL
GpuF0MMReg\:0x7988
2-313
DVOA_CONTROL
GpuF0MMReg\:0x7990
2-314
DVOA_CRC_CONTROL
GpuF0MMReg\:0x7998
2-315
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-21
Table A-5 Display Contoller Registers Sorted by Name
Register Name
(Continued)
Address
Page
DVOA_CRC_EN
GpuF0MMReg\:0x7994
2-314
DVOA_CRC_SIG_MASK1
GpuF0MMReg\:0x799C
2-315
DVOA_CRC_SIG_MASK2
GpuF0MMReg\:0x79A0
2-315
DVOA_CRC_SIG_RESULT1
GpuF0MMReg\:0x79A4
2-315
DVOA_CRC_SIG_RESULT2
GpuF0MMReg\:0x79A8
2-315
DVOA_CRC2_SIG_MASK
GpuF0MMReg\:0x79AC
2-316
DVOA_CRC2_SIG_RESULT
GpuF0MMReg\:0x79B0
2-316
DVOA_ENABLE
GpuF0MMReg\:0x7980
2-312
DVOA_FORCE_DATA
GpuF0MMReg\:0x79BC
2-317
DVOA_FORCE_OUTPUT_CNTL
GpuF0MMReg\:0x79B8
2-317
DVOA_OUTPUT
GpuF0MMReg\:0x798C
2-314
DVOA_SOURCE_SELECT
GpuF0MMReg\:0x7984
2-312
DVOA_STRENGTH_CONTROL
GpuF0MMReg\:0x79B4
2-316
GENFC_RD
GpuF0MMReg\:0x3CA
VGA_IO\:0x3CA
2-139
GENFC_WT
GpuF0MMReg\:0x3BA
GpuF0MMReg\:0x3DA
VGA_IO\:0x3BA
VGA_IO\:0x3DA
2-139
GENS0
GpuF0MMReg\:0x3C2
VGA_IO\:0x3C2
2-139
GENS1
GpuF0MMReg\:0x3BA
GpuF0MMReg\:0x3DA
VGA_IO\:0x3BA
VGA_IO\:0x3DA
2-139
GRPH8_DATA
GpuF0MMReg\:0x3CF
VGA_IO\:0x3CF
2-150
GRPH8_IDX
GpuF0MMReg\:0x3CE
VGA_IO\:0x3CE
2-150
MCIF_CONTROL
GpuF0MMReg\:0x6CB8
2-252
SEQ8_DATA
GpuF0MMReg\:0x3C5
VGA_IO\:0x3C5
2-141
SEQ8_IDX
GpuF0MMReg\:0x3C4
VGA_IO\:0x3C4
2-141
TMDSA_2ND_CRC_RESULT
GpuF0MMReg\:0x78BC
2-304
TMDSA_BIT_DEPTH_CONTROL
GpuF0MMReg\:0x7894
2-301
TMDSA_CNTL
GpuF0MMReg\:0x7880
2-299
TMDSA_COLOR_FORMAT
GpuF0MMReg\:0x7888
2-300
TMDSA_CONTROL_CHAR
GpuF0MMReg\:0x7898
2-301
TMDSA_CONTROL0_FEEDBACK
GpuF0MMReg\:0x789C
2-302
TMDSA_CRC_CNTL
GpuF0MMReg\:0x78B0
2-302
TMDSA_CRC_SIG_MASK
GpuF0MMReg\:0x78B4
2-303
TMDSA_CRC_SIG_RGB
GpuF0MMReg\:0x78B8
2-303
TMDSA_CTL_BITS
GpuF0MMReg\:0x78CC
2-305
TMDSA_CTL0_1_GEN_CNTL
GpuF0MMReg\:0x78E0
2-306
TMDSA_CTL2_3_GEN_CNTL
GpuF0MMReg\:0x78E4
2-307
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-22
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-5 Display Contoller Registers Sorted by Name
(Continued)
Register Name
Address
Page
TMDSA_DATA_SYNCHRONIZATION
GpuF0MMReg\:0x78DC
2-306
TMDSA_DCBALANCER_CONTROL
GpuF0MMReg\:0x78D0
2-305
TMDSA_DEBUG
GpuF0MMReg\:0x78C8
2-305
TMDSA_DITHER_RAND_SEED
GpuF0MMReg\:0x791C
2-311
TMDSA_FORCE_DATA
GpuF0MMReg\:0x7890
2-300
TMDSA_FORCE_OUTPUT_CNTL
GpuF0MMReg\:0x788C
2-300
TMDSA_LOAD_DETECT
GpuF0MMReg\:0x7908
2-309
TMDSA_PLL_ADJUST
GpuF0MMReg\:0x790C
2-309
TMDSA_RANDOM_PATTERN_SEED
GpuF0MMReg\:0x78C4
2-304
TMDSA_RED_BLUE_SWITCH
GpuF0MMReg\:0x78D4
2-305
TMDSA_REG_TEST_OUTPUTA
GpuF0MMReg\:0x7914
2-311
TMDSA_REG_TEST_OUTPUTB
GpuF0MMReg\:0x7924
2-312
TMDSA_SOURCE_SELECT
GpuF0MMReg\:0x7884
2-299
TMDSA_STEREOSYNC_CTL_SEL
GpuF0MMReg\:0x78A0
2-302
TMDSA_SYNC_CHAR_PATTERN_0_1
GpuF0MMReg\:0x78A8
2-302
TMDSA_SYNC_CHAR_PATTERN_2_3
GpuF0MMReg\:0x78AC
2-302
TMDSA_SYNC_CHAR_PATTERN_SEL
GpuF0MMReg\:0x78A4
2-302
TMDSA_TEST_PATTERN
GpuF0MMReg\:0x78C0
2-304
TMDSA_TRANSMITTER_ADJUST
GpuF0MMReg\:0x7920
2-312
TMDSA_TRANSMITTER_CONTROL
GpuF0MMReg\:0x7910
2-309
TMDSA_TRANSMITTER_DEBUG
GpuF0MMReg\:0x7918
2-311
TMDSA_TRANSMITTER_ENABLE
GpuF0MMReg\:0x7904
2-308
VGA_CACHE_CONTROL
GpuF0MMReg\:0x32C
2-162
VGA_DEBUG_READBACK_DATA
GpuF0MMReg\:0x35C
2-168
VGA_DEBUG_READBACK_INDEX
GpuF0MMReg\:0x358
2-167
VGA_DISPBUF1_SURFACE_ADDR
GpuF0MMReg\:0x318
2-161
VGA_DISPBUF2_SURFACE_ADDR
GpuF0MMReg\:0x320
2-161
VGA_HDP_CONTROL
GpuF0MMReg\:0x328
2-161
VGA_HW_DEBUG
GpuF0MMReg\:0x33C
2-164
VGA_INTERRUPT_CONTROL
GpuF0MMReg\:0x344
2-164
VGA_INTERRUPT_STATUS
GpuF0MMReg\:0x34C
2-165
VGA_MAIN_CONTROL
GpuF0MMReg\:0x350
2-165
VGA_MEM_READ_PAGE_ADDR
GpuF0MMReg\:0x4C
GpuIOReg\:0x4C
2-168
VGA_MEM_WRITE_PAGE_ADDR
GpuF0MMReg\:0x48
GpuIOReg\:0x48
2-168
VGA_MEMORY_BASE_ADDRESS
GpuF0MMReg\:0x310
2-161
VGA_MODE_CONTROL
GpuF0MMReg\:0x308
2-160
VGA_RENDER_CONTROL
GpuF0MMReg\:0x300
2-158
VGA_SEQUENCER_RESET_CONTROL
GpuF0MMReg\:0x304
2-159
VGA_STATUS
GpuF0MMReg\:0x340
2-164
VGA_STATUS_CLEAR
GpuF0MMReg\:0x348
2-164
VGA_SURFACE_PITCH_SELECT
GpuF0MMReg\:0x30C
2-160
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-23
Table A-5 Display Contoller Registers Sorted by Name
Register Name
VGA_TEST_CONTROL
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-24
(Continued)
Address
GpuF0MMReg\:0x354
Page
2-167
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.7
Display Controller Registers Stored by Address
Table A-6 Display Contoller Registers Sorted by Address
Register Name
Address
Page
VGA_RENDER_CONTROL
GpuF0MMReg\:0x300
2-158
VGA_SEQUENCER_RESET_CONTROL
GpuF0MMReg\:0x304
2-159
VGA_MODE_CONTROL
GpuF0MMReg\:0x308
2-160
VGA_SURFACE_PITCH_SELECT
GpuF0MMReg\:0x30C
2-160
VGA_MEMORY_BASE_ADDRESS
GpuF0MMReg\:0x310
2-161
VGA_DISPBUF1_SURFACE_ADDR
GpuF0MMReg\:0x318
2-161
VGA_DISPBUF2_SURFACE_ADDR
GpuF0MMReg\:0x320
2-161
VGA_HDP_CONTROL
GpuF0MMReg\:0x328
2-161
VGA_CACHE_CONTROL
GpuF0MMReg\:0x32C
2-162
D1VGA_CONTROL
GpuF0MMReg\:0x330
2-162
D2VGA_CONTROL
GpuF0MMReg\:0x338
2-163
VGA_HW_DEBUG
GpuF0MMReg\:0x33C
2-164
VGA_STATUS
GpuF0MMReg\:0x340
2-164
VGA_INTERRUPT_CONTROL
GpuF0MMReg\:0x344
2-164
VGA_STATUS_CLEAR
GpuF0MMReg\:0x348
2-164
VGA_INTERRUPT_STATUS
GpuF0MMReg\:0x34C
2-165
VGA_MAIN_CONTROL
GpuF0MMReg\:0x350
2-165
VGA_TEST_CONTROL
GpuF0MMReg\:0x354
2-167
VGA_DEBUG_READBACK_INDEX
GpuF0MMReg\:0x358
2-167
VGA_DEBUG_READBACK_DATA
GpuF0MMReg\:0x35C
2-168
CRTC8_IDX
GpuF0MMReg\:0x3B4
GpuF0MMReg\:0x3D4
VGA_IO\:0x3B4
VGA_IO\:0x3D4
2-143
CRTC8_DATA
GpuF0MMReg\:0x3B5
GpuF0MMReg\:0x3D5
VGA_IO\:0x3B5
VGA_IO\:0x3D5
2-143
GENFC_WT
GpuF0MMReg\:0x3BA
GpuF0MMReg\:0x3DA
VGA_IO\:0x3BA
VGA_IO\:0x3DA
2-139
GENS1
GpuF0MMReg\:0x3BA
GpuF0MMReg\:0x3DA
VGA_IO\:0x3BA
VGA_IO\:0x3DA
2-139
ATTRDW
GpuF0MMReg\:0x3C0
VGA_IO\:0x3C0
2-153
ATTRX
GpuF0MMReg\:0x3C0
VGA_IO\:0x3C0
2-152
ATTRDR
GpuF0MMReg\:0x3C1
VGA_IO\:0x3C1
2-153
GENS0
GpuF0MMReg\:0x3C2
VGA_IO\:0x3C2
2-139
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-25
Table A-6 Display Contoller Registers Sorted by Address
Register Name
(Continued)
Address
Page
SEQ8_IDX
GpuF0MMReg\:0x3C4
VGA_IO\:0x3C4
2-141
SEQ8_DATA
GpuF0MMReg\:0x3C5
VGA_IO\:0x3C5
2-141
DAC_MASK
GpuF0MMReg\:0x3C6
VGA_IO\:0x3C6
2-140
DAC_R_INDEX
GpuF0MMReg\:0x3C7
VGA_IO\:0x3C7
2-140
DAC_W_INDEX
GpuF0MMReg\:0x3C8
VGA_IO\:0x3C8
2-140
DAC_DATA
GpuF0MMReg\:0x3C9
VGA_IO\:0x3C9
2-140
GENFC_RD
GpuF0MMReg\:0x3CA
VGA_IO\:0x3CA
2-139
GRPH8_IDX
GpuF0MMReg\:0x3CE
VGA_IO\:0x3CE
2-150
GRPH8_DATA
GpuF0MMReg\:0x3CF
VGA_IO\:0x3CF
2-150
VGA_MEM_WRITE_PAGE_ADDR
GpuF0MMReg\:0x48
GpuIOReg\:0x48
2-168
VGA_MEM_READ_PAGE_ADDR
GpuF0MMReg\:0x4C
GpuIOReg\:0x4C
2-168
D1CRTC_H_TOTAL
GpuF0MMReg\:0x6000
2-254
D1CRTC_H_BLANK_START_END
GpuF0MMReg\:0x6004
2-254
D1CRTC_H_SYNC_A
GpuF0MMReg\:0x6008
2-255
D1CRTC_H_SYNC_A_CNTL
GpuF0MMReg\:0x600C
2-255
D1CRTC_H_SYNC_B
GpuF0MMReg\:0x6010
2-255
D1CRTC_H_SYNC_B_CNTL
GpuF0MMReg\:0x6014
2-256
D1CRTC_V_TOTAL
GpuF0MMReg\:0x6020
2-256
D1CRTC_V_BLANK_START_END
GpuF0MMReg\:0x6024
2-256
D1CRTC_V_SYNC_A
GpuF0MMReg\:0x6028
2-256
D1CRTC_V_SYNC_A_CNTL
GpuF0MMReg\:0x602C
2-257
D1CRTC_V_SYNC_B
GpuF0MMReg\:0x6030
2-257
D1CRTC_V_SYNC_B_CNTL
GpuF0MMReg\:0x6034
2-257
D1CRTC_MVP_CONTROL1
GpuF0MMReg\:0x6038
2-201
D1CRTC_MVP_CONTROL2
GpuF0MMReg\:0x603C
2-202
D1CRTC_MVP_FIFO_CONTROL
GpuF0MMReg\:0x6040
2-202
D1CRTC_MVP_FIFO_STATUS
GpuF0MMReg\:0x6044
2-202
D1CRTC_MVP_SLAVE_STATUS
GpuF0MMReg\:0x6048
2-203
D1CRTC_MVP_INBAND_CNTL_CAP
GpuF0MMReg\:0x604C
2-203
D1CRTC_MVP_INBAND_CNTL_INSERT
GpuF0MMReg\:0x6050
2-203
D1CRTC_MVP_INBAND_CNTL_INSERT_TIMER
GpuF0MMReg\:0x6054
2-203
D1CRTC_MVP_BLACK_KEYER
GpuF0MMReg\:0x6058
2-204
D1CRTC_MVP_STATUS
GpuF0MMReg\:0x605C
2-204
D1CRTC_TRIGA_CNTL
GpuF0MMReg\:0x6060
2-257
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-26
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-6 Display Contoller Registers Sorted by Address
Register Name
(Continued)
Address
Page
D1CRTC_TRIGA_MANUAL_TRIG
GpuF0MMReg\:0x6064
2-259
D1CRTC_TRIGB_CNTL
GpuF0MMReg\:0x6068
2-259
D1CRTC_TRIGB_MANUAL_TRIG
GpuF0MMReg\:0x606C
2-260
D1CRTC_FORCE_COUNT_NOW_CNTL
GpuF0MMReg\:0x6070
2-260
D1CRTC_FLOW_CONTROL
GpuF0MMReg\:0x6074
2-260
D1CRTC_PIXEL_DATA_READBACK
GpuF0MMReg\:0x6078
2-261
D1CRTC_STEREO_FORCE_NEXT_EYE
GpuF0MMReg\:0x607C
2-261
D1CRTC_CONTROL
GpuF0MMReg\:0x6080
2-262
D1CRTC_BLANK_CONTROL
GpuF0MMReg\:0x6084
2-262
D1CRTC_INTERLACE_CONTROL
GpuF0MMReg\:0x6088
2-263
D1CRTC_INTERLACE_STATUS
GpuF0MMReg\:0x608C
2-263
D1CRTC_BLANK_DATA_COLOR
GpuF0MMReg\:0x6090
2-263
D1CRTC_OVERSCAN_COLOR
GpuF0MMReg\:0x6094
2-264
D1CRTC_BLACK_COLOR
GpuF0MMReg\:0x6098
2-264
D1CRTC_STATUS
GpuF0MMReg\:0x609C
2-264
D1CRTC_STATUS_POSITION
GpuF0MMReg\:0x60A0
2-264
D1CRTC_STATUS_FRAME_COUNT
GpuF0MMReg\:0x60A4
2-265
D1CRTC_STATUS_VF_COUNT
GpuF0MMReg\:0x60A8
2-265
D1CRTC_STATUS_HV_COUNT
GpuF0MMReg\:0x60AC
2-265
D1CRTC_COUNT_RESET
GpuF0MMReg\:0x60B0
2-265
D1CRTC_COUNT_CONTROL
GpuF0MMReg\:0x60B4
2-265
D1CRTC_MANUAL_FORCE_VSYNC_NEXT_LINE
GpuF0MMReg\:0x60B8
2-266
D1CRTC_VERT_SYNC_CONTROL
GpuF0MMReg\:0x60BC
2-266
D1CRTC_STEREO_STATUS
GpuF0MMReg\:0x60C0
2-266
D1CRTC_STEREO_CONTROL
GpuF0MMReg\:0x60C4
2-266
D1CRTC_SNAPSHOT_STATUS
GpuF0MMReg\:0x60C8
2-267
D1CRTC_SNAPSHOT_CONTROL
GpuF0MMReg\:0x60CC
2-267
D1CRTC_SNAPSHOT_POSITION
GpuF0MMReg\:0x60D0
2-267
D1CRTC_SNAPSHOT_FRAME
GpuF0MMReg\:0x60D4
2-267
D1CRTC_START_LINE_CONTROL
GpuF0MMReg\:0x60D8
2-268
D1CRTC_INTERRUPT_CONTROL
GpuF0MMReg\:0x60DC
2-268
D1MODE_MASTER_UPDATE_LOCK
GpuF0MMReg\:0x60E0
2-268
D1MODE_MASTER_UPDATE_MODE
GpuF0MMReg\:0x60E4
2-269
D1CRTC_UPDATE_LOCK
GpuF0MMReg\:0x60E8
2-269
D1CRTC_DOUBLE_BUFFER_CONTROL
GpuF0MMReg\:0x60EC
2-269
D1CRTC_VGA_PARAMETER_CAPTURE_MODE
GpuF0MMReg\:0x60F0
2-270
DC_CRTC_MASTER_EN
GpuF0MMReg\:0x60F8
2-254
DC_CRTC_TV_CONTROL
GpuF0MMReg\:0x60FC
2-254
D1GRPH_ENABLE
GpuF0MMReg\:0x6100
2-169
D1GRPH_CONTROL
GpuF0MMReg\:0x6104
2-169
D1GRPH_LUT_SEL
GpuF0MMReg\:0x6108
2-170
D1GRPH_SWAP_CNTL
GpuF0MMReg\:0x610C
2-171
D1GRPH_PRIMARY_SURFACE_ADDRESS
GpuF0MMReg\:0x6110
2-171
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-27
Table A-6 Display Contoller Registers Sorted by Address
(Continued)
Register Name
Address
D1GRPH_SECONDARY_SURFACE_ADDRESS
GpuF0MMReg\:0x6118
Page
2-172
D1GRPH_PITCH
GpuF0MMReg\:0x6120
2-172
D1GRPH_SURFACE_OFFSET_X
GpuF0MMReg\:0x6124
2-172
D1GRPH_SURFACE_OFFSET_Y
GpuF0MMReg\:0x6128
2-172
D1GRPH_X_START
GpuF0MMReg\:0x612C
2-172
D1GRPH_Y_START
GpuF0MMReg\:0x6130
2-173
D1GRPH_X_END
GpuF0MMReg\:0x6134
2-173
D1GRPH_Y_END
GpuF0MMReg\:0x6138
2-173
D1COLOR_SPACE_CONVERT
GpuF0MMReg\:0x613C
2-194
D1OVL_COLOR_MATRIX_TRANSFORMATION_CNTL
GpuF0MMReg\:0x6140
2-180
D1GRPH_UPDATE
GpuF0MMReg\:0x6144
2-173
D1GRPH_FLIP_CONTROL
GpuF0MMReg\:0x6148
2-175
D1GRPH_SURFACE_ADDRESS_INUSE
GpuF0MMReg\:0x614C
2-175
D1OVL_ENABLE
GpuF0MMReg\:0x6180
2-175
D1OVL_CONTROL1
GpuF0MMReg\:0x6184
2-175
D1OVL_CONTROL2
GpuF0MMReg\:0x6188
2-176
D1OVL_SWAP_CNTL
GpuF0MMReg\:0x618C
2-177
D1OVL_SURFACE_ADDRESS
GpuF0MMReg\:0x6190
2-177
D1OVL_PITCH
GpuF0MMReg\:0x6198
2-177
D1OVL_SURFACE_OFFSET_X
GpuF0MMReg\:0x619C
2-178
D1OVL_SURFACE_OFFSET_Y
GpuF0MMReg\:0x61A0
2-178
D1OVL_START
GpuF0MMReg\:0x61A4
2-178
D1OVL_END
GpuF0MMReg\:0x61A8
2-178
D1OVL_UPDATE
GpuF0MMReg\:0x61AC
2-178
D1OVL_SURFACE_ADDRESS_INUSE
GpuF0MMReg\:0x61B0
2-179
D1OVL_DFQ_CONTROL
GpuF0MMReg\:0x61B4
2-179
D1OVL_DFQ_STATUS
GpuF0MMReg\:0x61B8
2-180
D1OVL_MATRIX_TRANSFORM_EN
GpuF0MMReg\:0x6200
2-180
D1OVL_MATRIX_COEF_1_1
GpuF0MMReg\:0x6204
2-180
D1OVL_MATRIX_COEF_1_2
GpuF0MMReg\:0x6208
2-181
D1OVL_MATRIX_COEF_1_3
GpuF0MMReg\:0x620C
2-181
D1OVL_MATRIX_COEF_1_4
GpuF0MMReg\:0x6210
2-181
D1OVL_MATRIX_COEF_2_1
GpuF0MMReg\:0x6214
2-181
D1OVL_MATRIX_COEF_2_2
GpuF0MMReg\:0x6218
2-182
D1OVL_MATRIX_COEF_2_3
GpuF0MMReg\:0x621C
2-182
D1OVL_MATRIX_COEF_2_4
GpuF0MMReg\:0x6220
2-182
D1OVL_MATRIX_COEF_3_1
GpuF0MMReg\:0x6224
2-182
D1OVL_MATRIX_COEF_3_2
GpuF0MMReg\:0x6228
2-183
D1OVL_MATRIX_COEF_3_3
GpuF0MMReg\:0x622C
2-183
D1OVL_MATRIX_COEF_3_4
GpuF0MMReg\:0x6230
2-183
D1OVL_PWL_TRANSFORM_EN
GpuF0MMReg\:0x6280
2-183
D1OVL_PWL_0TOF
GpuF0MMReg\:0x6284
2-183
D1OVL_PWL_10TO1F
GpuF0MMReg\:0x6288
2-184
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-28
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-6 Display Contoller Registers Sorted by Address
(Continued)
Register Name
Address
D1OVL_PWL_20TO3F
Page
GpuF0MMReg\:0x628C
2-184
D1OVL_PWL_40TO7F
GpuF0MMReg\:0x6290
2-184
D1OVL_PWL_80TOBF
GpuF0MMReg\:0x6294
2-184
D1OVL_PWL_C0TOFF
GpuF0MMReg\:0x6298
2-185
D1OVL_PWL_100TO13F
GpuF0MMReg\:0x629C
2-185
D1OVL_PWL_140TO17F
GpuF0MMReg\:0x62A0
2-185
D1OVL_PWL_180TO1BF
GpuF0MMReg\:0x62A4
2-185
D1OVL_PWL_1C0TO1FF
GpuF0MMReg\:0x62A8
2-185
D1OVL_PWL_200TO23F
GpuF0MMReg\:0x62AC
2-186
D1OVL_PWL_240TO27F
GpuF0MMReg\:0x62B0
2-186
D1OVL_PWL_280TO2BF
GpuF0MMReg\:0x62B4
2-186
D1OVL_PWL_2C0TO2FF
GpuF0MMReg\:0x62B8
2-186
D1OVL_PWL_300TO33F
GpuF0MMReg\:0x62BC
2-186
D1OVL_PWL_340TO37F
GpuF0MMReg\:0x62C0
2-187
D1OVL_PWL_380TO3BF
GpuF0MMReg\:0x62C4
2-187
D1OVL_PWL_3C0TO3FF
GpuF0MMReg\:0x62C8
2-187
D1OVL_KEY_CONTROL
GpuF0MMReg\:0x6300
2-187
D1GRPH_ALPHA
GpuF0MMReg\:0x6304
2-188
D1OVL_ALPHA
GpuF0MMReg\:0x6308
2-188
D1OVL_ALPHA_CONTROL
GpuF0MMReg\:0x630C
2-188
D1GRPH_KEY_RANGE_RED
GpuF0MMReg\:0x6310
2-189
D1GRPH_KEY_RANGE_GREEN
GpuF0MMReg\:0x6314
2-189
D1GRPH_KEY_RANGE_BLUE
GpuF0MMReg\:0x6318
2-189
D1GRPH_KEY_RANGE_ALPHA
GpuF0MMReg\:0x631C
2-190
D1OVL_KEY_RANGE_RED_CR
GpuF0MMReg\:0x6320
2-190
D1OVL_KEY_RANGE_GREEN_Y
GpuF0MMReg\:0x6324
2-190
D1OVL_KEY_RANGE_BLUE_CB
GpuF0MMReg\:0x6328
2-190
D1OVL_KEY_ALPHA
GpuF0MMReg\:0x632C
2-191
D1GRPH_COLOR_MATRIX_TRANSFORMATION_CNTL
GpuF0MMReg\:0x6380
2-191
D1COLOR_MATRIX_COEF_1_1
GpuF0MMReg\:0x6384
2-191
D1COLOR_MATRIX_COEF_1_2
GpuF0MMReg\:0x6388
2-192
D1COLOR_MATRIX_COEF_1_3
GpuF0MMReg\:0x638C
2-192
D1COLOR_MATRIX_COEF_1_4
GpuF0MMReg\:0x6390
2-192
D1COLOR_MATRIX_COEF_2_1
GpuF0MMReg\:0x6394
2-192
D1COLOR_MATRIX_COEF_2_2
GpuF0MMReg\:0x6398
2-193
D1COLOR_MATRIX_COEF_2_3
GpuF0MMReg\:0x639C
2-193
D1COLOR_MATRIX_COEF_2_4
GpuF0MMReg\:0x63A0
2-193
D1COLOR_MATRIX_COEF_3_1
GpuF0MMReg\:0x63A4
2-193
D1COLOR_MATRIX_COEF_3_2
GpuF0MMReg\:0x63A8
2-194
D1COLOR_MATRIX_COEF_3_3
GpuF0MMReg\:0x63AC
2-194
D1COLOR_MATRIX_COEF_3_4
GpuF0MMReg\:0x63B0
2-194
D1CUR_CONTROL
GpuF0MMReg\:0x6400
2-196
D1CUR_SURFACE_ADDRESS
GpuF0MMReg\:0x6408
2-197
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-29
Table A-6 Display Contoller Registers Sorted by Address
Register Name
(Continued)
Address
D1CUR_SIZE
GpuF0MMReg\:0x6410
Page
2-197
D1CUR_POSITION
GpuF0MMReg\:0x6414
2-197
D1CUR_HOT_SPOT
GpuF0MMReg\:0x6418
2-198
D1CUR_COLOR1
GpuF0MMReg\:0x641C
2-198
D1CUR_COLOR2
GpuF0MMReg\:0x6420
2-198
D1CUR_UPDATE
GpuF0MMReg\:0x6424
2-198
D1ICON_CONTROL
GpuF0MMReg\:0x6440
2-199
D1ICON_SURFACE_ADDRESS
GpuF0MMReg\:0x6448
2-199
D1ICON_SIZE
GpuF0MMReg\:0x6450
2-200
D1ICON_START_POSITION
GpuF0MMReg\:0x6454
2-200
D1ICON_COLOR1
GpuF0MMReg\:0x6458
2-200
D1ICON_COLOR2
GpuF0MMReg\:0x645C
2-200
D1ICON_UPDATE
GpuF0MMReg\:0x6460
2-201
DC_LUT_RW_SELECT
GpuF0MMReg\:0x6480
2-240
DC_LUT_RW_MODE
GpuF0MMReg\:0x6484
2-241
DC_LUT_RW_INDEX
GpuF0MMReg\:0x6488
2-241
DC_LUT_SEQ_COLOR
GpuF0MMReg\:0x648C
2-241
DC_LUT_PWL_DATA
GpuF0MMReg\:0x6490
2-241
DC_LUT_30_COLOR
GpuF0MMReg\:0x6494
2-242
DC_LUT_READ_PIPE_SELECT
GpuF0MMReg\:0x6498
2-242
DC_LUT_WRITE_EN_MASK
GpuF0MMReg\:0x649C
2-242
DC_LUT_AUTOFILL
GpuF0MMReg\:0x64A0
2-242
DC_LUTA_CONTROL
GpuF0MMReg\:0x64C0
2-243
DC_LUTA_BLACK_OFFSET_BLUE
GpuF0MMReg\:0x64C4
2-245
DC_LUTA_BLACK_OFFSET_GREEN
GpuF0MMReg\:0x64C8
2-245
DC_LUTA_BLACK_OFFSET_RED
GpuF0MMReg\:0x64CC
2-245
DC_LUTA_WHITE_OFFSET_BLUE
GpuF0MMReg\:0x64D0
2-245
DC_LUTA_WHITE_OFFSET_GREEN
GpuF0MMReg\:0x64D4
2-245
DC_LUTA_WHITE_OFFSET_RED
GpuF0MMReg\:0x64D8
2-245
D1OVL_RT_SKEWCOMMAND
GpuF0MMReg\:0x6500
2-195
D1OVL_RT_SKEWCONTROL
GpuF0MMReg\:0x6504
2-195
D1OVL_RT_BAND_POSITION
GpuF0MMReg\:0x6508
2-195
D1OVL_RT_PROCEED_COND
GpuF0MMReg\:0x650C
2-195
D1OVL_RT_STAT
GpuF0MMReg\:0x6510
2-196
D1_MVP_AFR_FLIP_MODE
GpuF0MMReg\:0x6514
2-206
D1_MVP_AFR_FLIP_FIFO_CNTL
GpuF0MMReg\:0x6518
2-206
D1_MVP_FLIP_LINE_NUM_INSERT
GpuF0MMReg\:0x651C
2-207
D2_MVP_AFR_FLIP_MODE
GpuF0MMReg\:0x65E8
2-240
D2_MVP_AFR_FLIP_FIFO_CNTL
GpuF0MMReg\:0x65EC
2-240
D2_MVP_FLIP_LINE_NUM_INSERT
GpuF0MMReg\:0x65F0
2-240
DC_MVP_LB_CONTROL
GpuF0MMReg\:0x65F4
2-253
D2CRTC_H_TOTAL
GpuF0MMReg\:0x6800
2-270
D2CRTC_H_BLANK_START_END
GpuF0MMReg\:0x6804
2-270
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-30
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-6 Display Contoller Registers Sorted by Address
Register Name
(Continued)
Address
Page
D2CRTC_H_SYNC_A
GpuF0MMReg\:0x6808
2-270
D2CRTC_H_SYNC_A_CNTL
GpuF0MMReg\:0x680C
2-271
D2CRTC_H_SYNC_B
GpuF0MMReg\:0x6810
2-271
D2CRTC_H_SYNC_B_CNTL
GpuF0MMReg\:0x6814
2-271
D2CRTC_VBI_END
GpuF0MMReg\:0x6818
2-272
D2CRTC_V_TOTAL
GpuF0MMReg\:0x6820
2-272
D2CRTC_V_BLANK_START_END
GpuF0MMReg\:0x6824
2-272
D2CRTC_V_SYNC_A
GpuF0MMReg\:0x6828
2-272
D2CRTC_V_SYNC_A_CNTL
GpuF0MMReg\:0x682C
2-273
D2CRTC_V_SYNC_B
GpuF0MMReg\:0x6830
2-273
D2CRTC_V_SYNC_B_CNTL
GpuF0MMReg\:0x6834
2-273
D2CRTC_MVP_INBAND_CNTL_INSERT
GpuF0MMReg\:0x6838
2-204
D2CRTC_MVP_INBAND_CNTL_INSERT_TIMER
GpuF0MMReg\:0x683C
2-204
D1CRTC_MVP_CRC_CNTL
GpuF0MMReg\:0x6840
2-204
D1CRTC_MVP_CRC_RESULT
GpuF0MMReg\:0x6844
2-205
D1CRTC_MVP_CRC2_CNTL
GpuF0MMReg\:0x6848
2-205
D1CRTC_MVP_CRC2_RESULT
GpuF0MMReg\:0x684C
2-205
D1CRTC_MVP_CONTROL3
GpuF0MMReg\:0x6850
2-205
D1CRTC_MVP_RECEIVE_CNT_CNTL1
GpuF0MMReg\:0x6854
2-206
D1CRTC_MVP_RECEIVE_CNT_CNTL2
GpuF0MMReg\:0x6858
2-206
D2CRTC_MVP_STATUS
GpuF0MMReg\:0x685C
2-239
D2CRTC_TRIGA_CNTL
GpuF0MMReg\:0x6860
2-273
D2CRTC_TRIGA_MANUAL_TRIG
GpuF0MMReg\:0x6864
2-275
D2CRTC_TRIGB_CNTL
GpuF0MMReg\:0x6868
2-275
D2CRTC_TRIGB_MANUAL_TRIG
GpuF0MMReg\:0x686C
2-276
D2CRTC_FORCE_COUNT_NOW_CNTL
GpuF0MMReg\:0x6870
2-276
D2CRTC_FLOW_CONTROL
GpuF0MMReg\:0x6874
2-276
D2CRTC_PIXEL_DATA_READBACK
GpuF0MMReg\:0x6878
2-277
D2CRTC_STEREO_FORCE_NEXT_EYE
GpuF0MMReg\:0x687C
2-277
D2CRTC_CONTROL
GpuF0MMReg\:0x6880
2-278
D2CRTC_BLANK_CONTROL
GpuF0MMReg\:0x6884
2-278
D2CRTC_INTERLACE_CONTROL
GpuF0MMReg\:0x6888
2-279
D2CRTC_INTERLACE_STATUS
GpuF0MMReg\:0x688C
2-279
D2CRTC_BLANK_DATA_COLOR
GpuF0MMReg\:0x6890
2-279
D2CRTC_OVERSCAN_COLOR
GpuF0MMReg\:0x6894
2-280
D2CRTC_BLACK_COLOR
GpuF0MMReg\:0x6898
2-280
D2CRTC_STATUS
GpuF0MMReg\:0x689C
2-280
D2CRTC_STATUS_POSITION
GpuF0MMReg\:0x68A0
2-280
D2CRTC_STATUS_FRAME_COUNT
GpuF0MMReg\:0x68A4
2-281
D2CRTC_STATUS_VF_COUNT
GpuF0MMReg\:0x68A8
2-281
D2CRTC_STATUS_HV_COUNT
GpuF0MMReg\:0x68AC
2-281
D2CRTC_COUNT_RESET
GpuF0MMReg\:0x68B0
2-281
D2CRTC_COUNT_CONTROL
GpuF0MMReg\:0x68B4
2-281
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-31
Table A-6 Display Contoller Registers Sorted by Address
(Continued)
Register Name
D2CRTC_MANUAL_FORCE_VSYNC_NEXT_LINE
Address
Page
GpuF0MMReg\:0x68B8
2-282
D2CRTC_VERT_SYNC_CONTROL
GpuF0MMReg\:0x68BC
2-282
D2CRTC_STEREO_STATUS
GpuF0MMReg\:0x68C0
2-282
D2CRTC_STEREO_CONTROL
GpuF0MMReg\:0x68C4
2-282
D2CRTC_SNAPSHOT_STATUS
GpuF0MMReg\:0x68C8
2-283
D2CRTC_SNAPSHOT_CONTROL
GpuF0MMReg\:0x68CC
2-283
D2CRTC_SNAPSHOT_POSITION
GpuF0MMReg\:0x68D0
2-283
D2CRTC_SNAPSHOT_FRAME
GpuF0MMReg\:0x68D4
2-283
D2CRTC_START_LINE_CONTROL
GpuF0MMReg\:0x68D8
2-283
D2CRTC_INTERRUPT_CONTROL
GpuF0MMReg\:0x68DC
2-284
D2MODE_MASTER_UPDATE_LOCK
GpuF0MMReg\:0x68E0
2-284
D2MODE_MASTER_UPDATE_MODE
GpuF0MMReg\:0x68E4
2-284
D2CRTC_UPDATE_LOCK
GpuF0MMReg\:0x68E8
2-285
D2CRTC_DOUBLE_BUFFER_CONTROL
GpuF0MMReg\:0x68EC
2-285
D2CRTC_VGA_PARAMETER_CAPTURE_MODE
GpuF0MMReg\:0x68F0
2-285
D2GRPH_ENABLE
GpuF0MMReg\:0x6900
2-207
D2GRPH_CONTROL
GpuF0MMReg\:0x6904
2-207
D2GRPH_LUT_SEL
GpuF0MMReg\:0x6908
2-209
D2GRPH_SWAP_CNTL
GpuF0MMReg\:0x690C
2-209
D2GRPH_PRIMARY_SURFACE_ADDRESS
GpuF0MMReg\:0x6910
2-210
D2GRPH_SECONDARY_SURFACE_ADDRESS
GpuF0MMReg\:0x6918
2-210
D2GRPH_PITCH
GpuF0MMReg\:0x6920
2-210
D2GRPH_SURFACE_OFFSET_X
GpuF0MMReg\:0x6924
2-211
D2GRPH_SURFACE_OFFSET_Y
GpuF0MMReg\:0x6928
2-211
D2GRPH_X_START
GpuF0MMReg\:0x692C
2-211
D2GRPH_Y_START
GpuF0MMReg\:0x6930
2-211
D2GRPH_X_END
GpuF0MMReg\:0x6934
2-212
D2GRPH_Y_END
GpuF0MMReg\:0x6938
2-212
D2COLOR_SPACE_CONVERT
GpuF0MMReg\:0x693C
2-233
D2OVL_COLOR_MATRIX_TRANSFORMATION_CNTL
GpuF0MMReg\:0x6940
2-221
D2GRPH_UPDATE
GpuF0MMReg\:0x6944
2-212
D2GRPH_FLIP_CONTROL
GpuF0MMReg\:0x6948
2-213
D2GRPH_SURFACE_ADDRESS_INUSE
GpuF0MMReg\:0x694C
2-213
D2OVL_ENABLE
GpuF0MMReg\:0x6980
2-214
D2OVL_CONTROL1
GpuF0MMReg\:0x6984
2-214
D2OVL_CONTROL2
GpuF0MMReg\:0x6988
2-215
D2OVL_SWAP_CNTL
GpuF0MMReg\:0x698C
2-215
D2OVL_SURFACE_ADDRESS
GpuF0MMReg\:0x6990
2-216
D2OVL_PITCH
GpuF0MMReg\:0x6998
2-216
D2OVL_SURFACE_OFFSET_X
GpuF0MMReg\:0x699C
2-216
D2OVL_SURFACE_OFFSET_Y
GpuF0MMReg\:0x69A0
2-216
D2OVL_START
GpuF0MMReg\:0x69A4
2-217
D2OVL_END
GpuF0MMReg\:0x69A8
2-217
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-32
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-6 Display Contoller Registers Sorted by Address
(Continued)
Register Name
Address
Page
D2OVL_UPDATE
GpuF0MMReg\:0x69AC
D2OVL_SURFACE_ADDRESS_INUSE
GpuF0MMReg\:0x69B0
2-218
D2OVL_DFQ_CONTROL
GpuF0MMReg\:0x69B4
2-218
D2OVL_DFQ_STATUS
GpuF0MMReg\:0x69B8
2-218
D2OVL_MATRIX_TRANSFORM_EN
GpuF0MMReg\:0x6A00
2-218
D2OVL_MATRIX_COEF_1_1
GpuF0MMReg\:0x6A04
2-219
D2OVL_MATRIX_COEF_1_2
GpuF0MMReg\:0x6A08
2-219
D2OVL_MATRIX_COEF_1_3
GpuF0MMReg\:0x6A0C
2-219
D2OVL_MATRIX_COEF_1_4
GpuF0MMReg\:0x6A10
2-219
D2OVL_MATRIX_COEF_2_1
GpuF0MMReg\:0x6A14
2-219
D2OVL_MATRIX_COEF_2_2
GpuF0MMReg\:0x6A18
2-220
D2OVL_MATRIX_COEF_2_3
GpuF0MMReg\:0x6A1C
2-220
D2OVL_MATRIX_COEF_2_4
GpuF0MMReg\:0x6A20
2-220
D2OVL_MATRIX_COEF_3_1
GpuF0MMReg\:0x6A24
2-220
D2OVL_MATRIX_COEF_3_2
GpuF0MMReg\:0x6A28
2-221
D2OVL_MATRIX_COEF_3_3
GpuF0MMReg\:0x6A2C
2-221
D2OVL_MATRIX_COEF_3_4
GpuF0MMReg\:0x6A30
2-221
D2OVL_PWL_TRANSFORM_EN
GpuF0MMReg\:0x6A80
2-222
2-217
D2OVL_PWL_0TOF
GpuF0MMReg\:0x6A84
2-222
D2OVL_PWL_10TO1F
GpuF0MMReg\:0x6A88
2-222
D2OVL_PWL_20TO3F
GpuF0MMReg\:0x6A8C
2-222
D2OVL_PWL_40TO7F
GpuF0MMReg\:0x6A90
2-222
D2OVL_PWL_80TOBF
GpuF0MMReg\:0x6A94
2-223
D2OVL_PWL_C0TOFF
GpuF0MMReg\:0x6A98
2-223
D2OVL_PWL_100TO13F
GpuF0MMReg\:0x6A9C
2-223
D2OVL_PWL_140TO17F
GpuF0MMReg\:0x6AA0
2-223
D2OVL_PWL_180TO1BF
GpuF0MMReg\:0x6AA4
2-224
D2OVL_PWL_1C0TO1FF
GpuF0MMReg\:0x6AA8
2-224
D2OVL_PWL_200TO23F
GpuF0MMReg\:0x6AAC
2-224
D2OVL_PWL_240TO27F
GpuF0MMReg\:0x6AB0
2-224
D2OVL_PWL_280TO2BF
GpuF0MMReg\:0x6AB4
2-224
D2OVL_PWL_2C0TO2FF
GpuF0MMReg\:0x6AB8
2-225
D2OVL_PWL_300TO33F
GpuF0MMReg\:0x6ABC
2-225
D2OVL_PWL_340TO37F
GpuF0MMReg\:0x6AC0
2-225
D2OVL_PWL_380TO3BF
GpuF0MMReg\:0x6AC4
2-225
D2OVL_PWL_3C0TO3FF
GpuF0MMReg\:0x6AC8
2-225
D2OVL_KEY_CONTROL
GpuF0MMReg\:0x6B00
2-226
D2GRPH_ALPHA
GpuF0MMReg\:0x6B04
2-226
D2OVL_ALPHA
GpuF0MMReg\:0x6B08
2-226
D2OVL_ALPHA_CONTROL
GpuF0MMReg\:0x6B0C
2-227
D2GRPH_KEY_RANGE_RED
GpuF0MMReg\:0x6B10
2-227
D2GRPH_KEY_RANGE_GREEN
GpuF0MMReg\:0x6B14
2-227
D2GRPH_KEY_RANGE_BLUE
GpuF0MMReg\:0x6B18
2-228
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-33
Table A-6 Display Contoller Registers Sorted by Address
(Continued)
Register Name
Address
D2GRPH_KEY_RANGE_ALPHA
GpuF0MMReg\:0x6B1C
Page
2-228
D2OVL_KEY_RANGE_RED_CR
GpuF0MMReg\:0x6B20
2-228
D2OVL_KEY_RANGE_GREEN_Y
GpuF0MMReg\:0x6B24
2-229
D2OVL_KEY_RANGE_BLUE_CB
GpuF0MMReg\:0x6B28
2-229
D2OVL_KEY_ALPHA
GpuF0MMReg\:0x6B2C
2-229
D2GRPH_COLOR_MATRIX_TRANSFORMATION_CNTL
GpuF0MMReg\:0x6B80
2-229
D2COLOR_MATRIX_COEF_1_1
GpuF0MMReg\:0x6B84
2-230
D2COLOR_MATRIX_COEF_1_2
GpuF0MMReg\:0x6B88
2-230
D2COLOR_MATRIX_COEF_1_3
GpuF0MMReg\:0x6B8C
2-230
D2COLOR_MATRIX_COEF_1_4
GpuF0MMReg\:0x6B90
2-230
D2COLOR_MATRIX_COEF_2_1
GpuF0MMReg\:0x6B94
2-231
D2COLOR_MATRIX_COEF_2_2
GpuF0MMReg\:0x6B98
2-231
D2COLOR_MATRIX_COEF_2_3
GpuF0MMReg\:0x6B9C
2-231
D2COLOR_MATRIX_COEF_2_4
GpuF0MMReg\:0x6BA0
2-231
D2COLOR_MATRIX_COEF_3_1
GpuF0MMReg\:0x6BA4
2-232
D2COLOR_MATRIX_COEF_3_2
GpuF0MMReg\:0x6BA8
2-232
D2COLOR_MATRIX_COEF_3_3
GpuF0MMReg\:0x6BAC
2-232
D2COLOR_MATRIX_COEF_3_4
GpuF0MMReg\:0x6BB0
2-232
D2CUR_CONTROL
GpuF0MMReg\:0x6C00
2-235
D2CUR_SURFACE_ADDRESS
GpuF0MMReg\:0x6C08
2-235
D2CUR_SIZE
GpuF0MMReg\:0x6C10
2-235
D2CUR_POSITION
GpuF0MMReg\:0x6C14
2-236
D2CUR_HOT_SPOT
GpuF0MMReg\:0x6C18
2-236
D2CUR_COLOR1
GpuF0MMReg\:0x6C1C
2-236
D2CUR_COLOR2
GpuF0MMReg\:0x6C20
2-236
D2CUR_UPDATE
GpuF0MMReg\:0x6C24
2-237
D2ICON_CONTROL
GpuF0MMReg\:0x6C40
2-237
D2ICON_SURFACE_ADDRESS
GpuF0MMReg\:0x6C48
2-238
D2ICON_SIZE
GpuF0MMReg\:0x6C50
2-238
D2ICON_START_POSITION
GpuF0MMReg\:0x6C54
2-238
D2ICON_COLOR1
GpuF0MMReg\:0x6C58
2-238
D2ICON_COLOR2
GpuF0MMReg\:0x6C5C
2-238
D2ICON_UPDATE
GpuF0MMReg\:0x6C60
2-239
DCP_CRC_CONTROL
GpuF0MMReg\:0x6C80
2-249
DCP_CRC_MASK
GpuF0MMReg\:0x6C84
2-249
DCP_CRC_P0_CURRENT
GpuF0MMReg\:0x6C88
2-249
DCP_CRC_P1_CURRENT
GpuF0MMReg\:0x6C8C
2-249
DCP_CRC_P0_LAST
GpuF0MMReg\:0x6C90
2-249
DCP_CRC_P1_LAST
GpuF0MMReg\:0x6C94
2-250
DCP_TILING_CONFIG
GpuF0MMReg\:0x6CA0
2-250
DCP_MULTI_CHIP_CNTL
GpuF0MMReg\:0x6CA4
2-251
DMIF_CONTROL
GpuF0MMReg\:0x6CB0
2-251
DMIF_STATUS
GpuF0MMReg\:0x6CB4
2-252
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-34
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-6 Display Contoller Registers Sorted by Address
(Continued)
Register Name
Address
MCIF_CONTROL
GpuF0MMReg\:0x6CB8
DCP_LB_DATA_GAP_BETWEEN_CHUNK
Page
2-252
GpuF0MMReg\:0x6CBC 2-253
DC_LUTB_CONTROL
GpuF0MMReg\:0x6CC0
2-246
DC_LUTB_BLACK_OFFSET_BLUE
GpuF0MMReg\:0x6CC4
2-248
DC_LUTB_BLACK_OFFSET_GREEN
GpuF0MMReg\:0x6CC8
2-248
DC_LUTB_BLACK_OFFSET_RED
GpuF0MMReg\:0x6CCC 2-248
DC_LUTB_WHITE_OFFSET_BLUE
GpuF0MMReg\:0x6CD0
2-248
DC_LUTB_WHITE_OFFSET_GREEN
GpuF0MMReg\:0x6CD4
2-248
DC_LUTB_WHITE_OFFSET_RED
GpuF0MMReg\:0x6CD8
2-248
D2OVL_RT_SKEWCOMMAND
GpuF0MMReg\:0x6D00
2-233
D2OVL_RT_SKEWCONTROL
GpuF0MMReg\:0x6D04
2-233
D2OVL_RT_BAND_POSITION
GpuF0MMReg\:0x6D08
2-234
D2OVL_RT_PROCEED_COND
GpuF0MMReg\:0x6D0C
2-234
D2OVL_RT_STAT
GpuF0MMReg\:0x6D10
2-234
DACA_SOURCE_SELECT
GpuF0MMReg\:0x7804
2-286
DACA_CRC_EN
GpuF0MMReg\:0x7808
2-286
DACA_CRC_CONTROL
GpuF0MMReg\:0x780C
2-286
DACA_CRC_SIG_RGB_MASK
GpuF0MMReg\:0x7810
2-287
DACA_CRC_SIG_CONTROL_MASK
GpuF0MMReg\:0x7814
2-287
DACA_CRC_SIG_RGB
GpuF0MMReg\:0x7818
2-287
DACA_CRC_SIG_CONTROL
GpuF0MMReg\:0x781C
2-287
DACA_SYNC_TRISTATE_CONTROL
GpuF0MMReg\:0x7820
2-287
DACA_SYNC_SELECT
GpuF0MMReg\:0x7824
2-287
DACA_AUTODETECT_CONTROL
GpuF0MMReg\:0x7828
2-288
DACA_AUTODETECT_CONTROL2
GpuF0MMReg\:0x782C
2-288
DACA_AUTODETECT_CONTROL3
GpuF0MMReg\:0x7830
2-288
DACA_AUTODETECT_STATUS
GpuF0MMReg\:0x7834
2-289
DACA_AUTODETECT_INT_CONTROL
GpuF0MMReg\:0x7838
2-289
DACA_FORCE_OUTPUT_CNTL
GpuF0MMReg\:0x783C
2-289
DACA_FORCE_DATA
GpuF0MMReg\:0x7840
2-290
DACA_POWERDOWN
GpuF0MMReg\:0x7850
2-290
DACA_CONTROL1
GpuF0MMReg\:0x7854
2-290
DACA_CONTROL2
GpuF0MMReg\:0x7858
2-290
DACA_COMPARATOR_ENABLE
GpuF0MMReg\:0x785C
2-291
DACA_COMPARATOR_OUTPUT
GpuF0MMReg\:0x7860
2-291
DACA_TEST_ENABLE
GpuF0MMReg\:0x7864
2-292
DACA_PWR_CNTL
GpuF0MMReg\:0x7868
2-292
DACA_DFT_CONFIG
GpuF0MMReg\:0x786C
2-292
TMDSA_CNTL
GpuF0MMReg\:0x7880
2-299
TMDSA_SOURCE_SELECT
GpuF0MMReg\:0x7884
2-299
TMDSA_COLOR_FORMAT
GpuF0MMReg\:0x7888
2-300
TMDSA_FORCE_OUTPUT_CNTL
GpuF0MMReg\:0x788C
2-300
TMDSA_FORCE_DATA
GpuF0MMReg\:0x7890
2-300
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-35
Table A-6 Display Contoller Registers Sorted by Address
Register Name
(Continued)
Address
Page
TMDSA_BIT_DEPTH_CONTROL
GpuF0MMReg\:0x7894
2-301
TMDSA_CONTROL_CHAR
GpuF0MMReg\:0x7898
2-301
TMDSA_CONTROL0_FEEDBACK
GpuF0MMReg\:0x789C
2-302
TMDSA_STEREOSYNC_CTL_SEL
GpuF0MMReg\:0x78A0
2-302
TMDSA_SYNC_CHAR_PATTERN_SEL
GpuF0MMReg\:0x78A4
2-302
TMDSA_SYNC_CHAR_PATTERN_0_1
GpuF0MMReg\:0x78A8
2-302
TMDSA_SYNC_CHAR_PATTERN_2_3
GpuF0MMReg\:0x78AC
2-302
TMDSA_CRC_CNTL
GpuF0MMReg\:0x78B0
2-302
TMDSA_CRC_SIG_MASK
GpuF0MMReg\:0x78B4
2-303
TMDSA_CRC_SIG_RGB
GpuF0MMReg\:0x78B8
2-303
TMDSA_2ND_CRC_RESULT
GpuF0MMReg\:0x78BC
2-304
TMDSA_TEST_PATTERN
GpuF0MMReg\:0x78C0
2-304
TMDSA_RANDOM_PATTERN_SEED
GpuF0MMReg\:0x78C4
2-304
TMDSA_DEBUG
GpuF0MMReg\:0x78C8
2-305
TMDSA_CTL_BITS
GpuF0MMReg\:0x78CC
2-305
TMDSA_DCBALANCER_CONTROL
GpuF0MMReg\:0x78D0
2-305
TMDSA_RED_BLUE_SWITCH
GpuF0MMReg\:0x78D4
2-305
TMDSA_DATA_SYNCHRONIZATION
GpuF0MMReg\:0x78DC
2-306
TMDSA_CTL0_1_GEN_CNTL
GpuF0MMReg\:0x78E0
2-306
TMDSA_CTL2_3_GEN_CNTL
GpuF0MMReg\:0x78E4
2-307
TMDSA_TRANSMITTER_ENABLE
GpuF0MMReg\:0x7904
2-308
TMDSA_LOAD_DETECT
GpuF0MMReg\:0x7908
2-309
TMDSA_PLL_ADJUST
GpuF0MMReg\:0x790C
2-309
TMDSA_TRANSMITTER_CONTROL
GpuF0MMReg\:0x7910
2-309
TMDSA_REG_TEST_OUTPUTA
GpuF0MMReg\:0x7914
2-311
TMDSA_TRANSMITTER_DEBUG
GpuF0MMReg\:0x7918
2-311
TMDSA_DITHER_RAND_SEED
GpuF0MMReg\:0x791C
2-311
TMDSA_TRANSMITTER_ADJUST
GpuF0MMReg\:0x7920
2-312
TMDSA_REG_TEST_OUTPUTB
GpuF0MMReg\:0x7924
2-312
DVOA_ENABLE
GpuF0MMReg\:0x7980
2-312
DVOA_SOURCE_SELECT
GpuF0MMReg\:0x7984
2-312
DVOA_BIT_DEPTH_CONTROL
GpuF0MMReg\:0x7988
2-313
DVOA_OUTPUT
GpuF0MMReg\:0x798C
2-314
DVOA_CONTROL
GpuF0MMReg\:0x7990
2-314
DVOA_CRC_EN
GpuF0MMReg\:0x7994
2-314
DVOA_CRC_CONTROL
GpuF0MMReg\:0x7998
2-315
DVOA_CRC_SIG_MASK1
GpuF0MMReg\:0x799C
2-315
DVOA_CRC_SIG_MASK2
GpuF0MMReg\:0x79A0
2-315
DVOA_CRC_SIG_RESULT1
GpuF0MMReg\:0x79A4
2-315
DVOA_CRC_SIG_RESULT2
GpuF0MMReg\:0x79A8
2-315
DVOA_CRC2_SIG_MASK
GpuF0MMReg\:0x79AC
2-316
DVOA_CRC2_SIG_RESULT
GpuF0MMReg\:0x79B0
2-316
DVOA_STRENGTH_CONTROL
GpuF0MMReg\:0x79B4
2-316
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-36
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-6 Display Contoller Registers Sorted by Address
Register Name
(Continued)
Address
Page
DVOA_FORCE_OUTPUT_CNTL
GpuF0MMReg\:0x79B8
2-317
DVOA_FORCE_DATA
GpuF0MMReg\:0x79BC
2-317
DACB_ENABLE
GpuF0MMReg\:0x7A00
2-292
DACB_SOURCE_SELECT
GpuF0MMReg\:0x7A04
2-292
DACB_CRC_EN
GpuF0MMReg\:0x7A08
2-293
DACB_CRC_CONTROL
GpuF0MMReg\:0x7A0C
2-293
DACB_CRC_SIG_RGB_MASK
GpuF0MMReg\:0x7A10
2-293
DACB_CRC_SIG_CONTROL_MASK
GpuF0MMReg\:0x7A14
2-293
DACB_CRC_SIG_RGB
GpuF0MMReg\:0x7A18
2-294
DACB_CRC_SIG_CONTROL
GpuF0MMReg\:0x7A1C
2-294
DACB_SYNC_TRISTATE_CONTROL
GpuF0MMReg\:0x7A20
2-294
DACB_SYNC_SELECT
GpuF0MMReg\:0x7A24
2-294
DACB_AUTODETECT_CONTROL
GpuF0MMReg\:0x7A28
2-294
DACB_AUTODETECT_CONTROL2
GpuF0MMReg\:0x7A2C
2-295
DACB_AUTODETECT_CONTROL3
GpuF0MMReg\:0x7A30
2-295
DACB_AUTODETECT_STATUS
GpuF0MMReg\:0x7A34
2-295
DACB_AUTODETECT_INT_CONTROL
GpuF0MMReg\:0x7A38
2-296
DACB_FORCE_OUTPUT_CNTL
GpuF0MMReg\:0x7A3C
2-296
DACB_FORCE_DATA
GpuF0MMReg\:0x7A40
2-296
DACB_POWERDOWN
GpuF0MMReg\:0x7A50
2-296
DACB_CONTROL1
GpuF0MMReg\:0x7A54
2-297
DACB_CONTROL2
GpuF0MMReg\:0x7A58
2-297
DACB_COMPARATOR_ENABLE
GpuF0MMReg\:0x7A5C
2-297
DACB_COMPARATOR_OUTPUT
GpuF0MMReg\:0x7A60
2-298
DACB_TEST_ENABLE
GpuF0MMReg\:0x7A64
2-298
DACB_PWR_CNTL
GpuF0MMReg\:0x7A68
2-298
DC_HOT_PLUG_DETECT1_CONTROL
GpuF0MMReg\:0x7D00
2-317
DC_HOT_PLUG_DETECT1_INT_STATUS
GpuF0MMReg\:0x7D04
2-317
DC_HOT_PLUG_DETECT1_INT_CONTROL
GpuF0MMReg\:0x7D08
2-318
DC_HOT_PLUG_DETECT2_CONTROL
GpuF0MMReg\:0x7D10
2-318
DC_HOT_PLUG_DETECT2_INT_STATUS
GpuF0MMReg\:0x7D14
2-318
DC_HOT_PLUG_DETECT2_INT_CONTROL
GpuF0MMReg\:0x7D18
2-318
DC_HOT_PLUG_DETECT_CLOCK_CONTROL
GpuF0MMReg\:0x7D20
2-319
DC_HOT_PLUG_DETECT3_CONTROL
GpuF0MMReg\:0x7D24
2-319
DC_HOT_PLUG_DETECT3_INT_STATUS
GpuF0MMReg\:0x7D28
2-319
DC_HOT_PLUG_DETECT3_INT_CONTROL
GpuF0MMReg\:0x7D2C
2-319
DC_GENERICA
GpuF0MMReg\:0x7DC0
2-320
DC_GENERICB
GpuF0MMReg\:0x7DC4
2-320
DC_PAD_EXTERN_SIG
GpuF0MMReg\:0x7DCC 2-320
DC_REF_CLK_CNTL
GpuF0MMReg\:0x7DD4 2-321
DC_GPIO_GENERIC_MASK
GpuF0MMReg\:0x7DE0
2-327
DC_GPIO_GENERIC_A
GpuF0MMReg\:0x7DE4
2-327
DC_GPIO_GENERIC_EN
GpuF0MMReg\:0x7DE8
2-327
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-37
Table A-6 Display Contoller Registers Sorted by Address
Register Name
DC_GPIO_GENERIC_Y
(Continued)
Address
Page
GpuF0MMReg\:0x7DEC 2-327
DC_GPIO_DDC4_MASK
GpuF0MMReg\:0x7E00
2-328
DC_GPIO_DDC4_A
GpuF0MMReg\:0x7E04
2-328
DC_GPIO_DDC4_EN
GpuF0MMReg\:0x7E08
2-328
DC_GPIO_DDC4_Y
GpuF0MMReg\:0x7E0C
2-328
DC_GPIO_DEBUG
GpuF0MMReg\:0x7E2C
2-328
DC_GPIO_DVODATA_MASK
GpuF0MMReg\:0x7E30
2-329
DC_GPIO_DVODATA_A
GpuF0MMReg\:0x7E34
2-329
DC_GPIO_DVODATA_EN
GpuF0MMReg\:0x7E38
2-329
DC_GPIO_DVODATA_Y
GpuF0MMReg\:0x7E3C
2-330
DC_GPIO_DDC1_MASK
GpuF0MMReg\:0x7E40
2-330
DC_GPIO_DDC1_A
GpuF0MMReg\:0x7E44
2-330
DC_GPIO_DDC1_EN
GpuF0MMReg\:0x7E48
2-331
DC_GPIO_DDC1_Y
GpuF0MMReg\:0x7E4C
2-331
DC_GPIO_DDC2_MASK
GpuF0MMReg\:0x7E50
2-331
DC_GPIO_DDC2_A
GpuF0MMReg\:0x7E54
2-331
DC_GPIO_DDC2_EN
GpuF0MMReg\:0x7E58
2-332
DC_GPIO_DDC2_Y
GpuF0MMReg\:0x7E5C
2-332
DC_GPIO_DDC3_MASK
GpuF0MMReg\:0x7E60
2-332
DC_GPIO_DDC3_A
GpuF0MMReg\:0x7E64
2-332
DC_GPIO_DDC3_EN
GpuF0MMReg\:0x7E68
2-333
DC_GPIO_DDC3_Y
GpuF0MMReg\:0x7E6C
2-333
DC_GPIO_SYNCA_MASK
GpuF0MMReg\:0x7E70
2-333
DC_GPIO_SYNCA_A
GpuF0MMReg\:0x7E74
2-333
DC_GPIO_SYNCA_EN
GpuF0MMReg\:0x7E78
2-334
DC_GPIO_SYNCA_Y
GpuF0MMReg\:0x7E7C
2-334
DC_GPIO_SYNCB_MASK
GpuF0MMReg\:0x7E80
2-334
DC_GPIO_SYNCB_A
GpuF0MMReg\:0x7E84
2-334
DC_GPIO_SYNCB_EN
GpuF0MMReg\:0x7E88
2-335
DC_GPIO_SYNCB_Y
GpuF0MMReg\:0x7E8C
2-335
DC_GPIO_HPD_MASK
GpuF0MMReg\:0x7E90
2-335
DC_GPIO_HPD_A
GpuF0MMReg\:0x7E94
2-335
DC_GPIO_HPD_EN
GpuF0MMReg\:0x7E98
2-336
DC_GPIO_HPD_Y
GpuF0MMReg\:0x7E9C
2-336
DC_GPIO_PWRSEQ_MASK
GpuF0MMReg\:0x7EA0
2-336
DC_GPIO_PWRSEQ_A
GpuF0MMReg\:0x7EA4
2-337
DC_GPIO_PWRSEQ_EN
GpuF0MMReg\:0x7EA8
2-337
DC_GPIO_PWRSEQ_Y
GpuF0MMReg\:0x7EAC
2-337
CAPTURE_START_STATUS
GpuF0MMReg\:0x7ED0
2-325
DC_GPIO_PAD_STRENGTH_1
GpuF0MMReg\:0x7ED4
2-337
DC_GPIO_PAD_STRENGTH_2
GpuF0MMReg\:0x7ED8
2-338
DISP_INTERRUPT_STATUS
DOUT_POWER_MANAGEMENT_CNTL
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-38
GpuF0MMReg\:0x7EDC 2-321
GpuF0MMReg\:0x7EE0
2-324
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-6 Display Contoller Registers Sorted by Address
Register Name
(Continued)
Address
Page
DISP_INTERRUPT_STATUS_CONTINUE
GpuF0MMReg\:0x7EE8
2-323
DISP_TIMER_CONTROL
GpuF0MMReg\:0x7EF0
2-325
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-39
A.8
Host Interface Decode Space Registers Sorted by Name
Table A-7 Host Interface Decode Space Registers Sorted by Name
Register Name
Address
Page
BUS_CNTL
GpuF0MMReg\:0x5420
2-51
CONFIG_APER_SIZE
GpuF0MMReg\:0x5430
2-53
CONFIG_CNTL
GpuF0MMReg\:0x5424
2-52
CONFIG_MEMSIZE
GpuF0MMReg\:0x5428
2-52
CONFIG_REG_APER_SIZE
GpuF0MMReg\:0x5434
2-53
GENENB
GpuF0MMReg\:0x3C3
VGA_IO\:0x3
C3
GENMO_WT
GpuF0MMReg\:0x3C2
VGA_IO\:0x3
C2
GENMO_RD
GpuF0MMReg\:0x3CC
VGA_IO\:0x3
CC
MM_INDEX
GpuF0MMReg\:0x0
GpuIOReg\:0x0
2-51
MM_DATA
GpuF0MMReg\:0x4
GpuIOReg\:0x4
2-51
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-40
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.9
Memory Controller Registers Sorted By Name
Table A-8 Memory Controller Registers Sorted by Name
Register Name
Address
Page
MC_IMP_CNTL
GpuF0MMReg\:0x26D4
2-10
MC_IMP_DEBUG
GpuF0MMReg\:0x2878
2-10
MC_IMP_STATUS
GpuF0MMReg\:0x2874
2-10
MC_IO_A_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2750
2-33
MC_IO_A_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2754
2-34
MC_IO_A_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27D8
2-45
MC_IO_A_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27DC
2-45
MC_IO_CK_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2730
2-31
MC_IO_CK_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2734
2-31
MC_IO_CK_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27B8
2-43
MC_IO_CK_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27BC
2-43
MC_IO_CMD_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2738
2-31
MC_IO_CMD_PAD_CNTL_D0_I1
GpuF0MMReg\:0x273C
2-32
MC_IO_CMD_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27C0
2-43
MC_IO_CMD_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27C4
2-43
MC_IO_DQ_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2740
2-32
MC_IO_DQ_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2744
2-32
MC_IO_DQ_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27C8
2-44
MC_IO_DQ_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27CC
2-44
MC_IO_PAD_CNTL
GpuF0MMReg\:0x2700
2-11
MC_IO_PAD_CNTL_D0
GpuF0MMReg\:0x27F0
2-25
MC_IO_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2704
2-28
MC_IO_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2708
2-28
MC_IO_PAD_CNTL_D1
GpuF0MMReg\:0x27F4
2-25
MC_IO_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2790
2-39
MC_IO_PAD_CNTL_D1_I1
GpuF0MMReg\:0x2794
2-40
MC_IO_QS_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2748
2-33
MC_IO_QS_PAD_CNTL_D0_I1
GpuF0MMReg\:0x274C
2-33
MC_IO_QS_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27D0
2-44
MC_IO_QS_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27D4
2-45
MC_IO_RD_DQ_CNTL_D0_I0
GpuF0MMReg\:0x2710
2-29
MC_IO_RD_DQ_CNTL_D0_I1
GpuF0MMReg\:0x2714
2-29
MC_IO_RD_DQ_CNTL_D1_I0
GpuF0MMReg\:0x2798
2-41
MC_IO_RD_DQ_CNTL_D1_I1
GpuF0MMReg\:0x279C
2-41
MC_IO_RD_QS_CNTL_D0_I0
GpuF0MMReg\:0x2718
2-30
MC_IO_RD_QS_CNTL_D0_I1
GpuF0MMReg\:0x271C
2-30
MC_IO_RD_QS_CNTL_D1_I0
GpuF0MMReg\:0x27A0
2-41
MC_IO_RD_QS_CNTL_D1_I1
GpuF0MMReg\:0x27A4
2-42
MC_IO_RD_QS2_CNTL_D0_I0
GpuF0MMReg\:0x2720
2-30
MC_IO_RD_QS2_CNTL_D0_I1
GpuF0MMReg\:0x2724
2-30
MC_IO_RD_QS2_CNTL_D1_I0
GpuF0MMReg\:0x27A8
2-42
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-41
Table A-8 Memory Controller Registers Sorted by Name
Register Name
(Continued)
Address
Page
MC_IO_RD_QS2_CNTL_D1_I1
GpuF0MMReg\:0x27AC
2-42
MC_IO_RD_STR_NCNTL_B0_D0
GpuF0MMReg\:0x26E8
2-35
MC_IO_RD_STR_NCNTL_B0_D1
GpuF0MMReg\:0x2820
2-46
MC_IO_RD_STR_NCNTL_B1_D0
GpuF0MMReg\:0x280C
2-35
MC_IO_RD_STR_NCNTL_B1_D1
GpuF0MMReg\:0x2828
2-46
MC_IO_RD_STR_NCNTL_B2_D0
GpuF0MMReg\:0x26F8
2-35
MC_IO_RD_STR_NCNTL_B2_D1
GpuF0MMReg\:0x2830
2-47
MC_IO_RD_STR_NCNTL_B3_D0
GpuF0MMReg\:0x27F8
2-35
MC_IO_RD_STR_NCNTL_B3_D1
GpuF0MMReg\:0x2838
2-47
MC_IO_RD_STR_NCNTL_B4_D0
GpuF0MMReg\:0x2800
2-36
MC_IO_RD_STR_NCNTL_B4_D1
GpuF0MMReg\:0x2840
2-47
MC_IO_RD_STR_NCNTL_B5_D0
GpuF0MMReg\:0x2808
2-36
MC_IO_RD_STR_NCNTL_B5_D1
GpuF0MMReg\:0x2848
2-47
MC_IO_RD_STR_NCNTL_B6_D0
GpuF0MMReg\:0x2810
2-36
MC_IO_RD_STR_NCNTL_B6_D1
GpuF0MMReg\:0x2850
2-48
MC_IO_RD_STR_NCNTL_B7_D0
GpuF0MMReg\:0x2818
2-37
MC_IO_RD_STR_NCNTL_B7_D1
GpuF0MMReg\:0x2858
2-48
MC_IO_WR_CNTL_D0_I0
GpuF0MMReg\:0x2728
2-30
MC_IO_WR_CNTL_D0_I1
GpuF0MMReg\:0x272C
2-31
MC_IO_WR_CNTL_D1_I0
GpuF0MMReg\:0x27B0
2-42
MC_IO_WR_CNTL_D1_I1
GpuF0MMReg\:0x27B4
2-42
MC_IO_WR_DQ_CNTL_D0_I0
GpuF0MMReg\:0x2758
2-34
MC_IO_WR_DQ_CNTL_D0_I1
GpuF0MMReg\:0x275C
2-34
MC_IO_WR_DQ_CNTL_D1_I0
GpuF0MMReg\:0x27E0
2-46
MC_IO_WR_DQ_CNTL_D1_I1
GpuF0MMReg\:0x27E4
2-46
MC_IO_WR_QS_CNTL_D0_I0
GpuF0MMReg\:0x2760
2-34
MC_IO_WR_QS_CNTL_D0_I1
GpuF0MMReg\:0x2764
2-34
MC_IO_WR_QS_CNTL_D1_I0
GpuF0MMReg\:0x27E8
2-46
MC_IO_WR_QS_CNTL_D1_I1
GpuF0MMReg\:0x27EC
2-46
MC_NPL_STATUS
GpuF0MMReg\:0x2888
2-50
MC_PMG_CFG
GpuF0MMReg\:0x26D0
2-9
MC_PMG_CMD
GpuF0MMReg\:0x26CC
2-8
MC_SEQ_A_PAD_CNTL_D0_I0
GpuF0MMReg\:0x268C
2-27
MC_SEQ_A_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2690
2-27
MC_SEQ_A_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2788
2-39
MC_SEQ_A_PAD_CNTL_D1_I1
GpuF0MMReg\:0x278C
2-39
MC_SEQ_CAS_TIMING_B
GpuF0MMReg\:0x2620
2-5
MC_SEQ_CAS_TIMING_C
GpuF0MMReg\:0x2640
2-7
MC_SEQ_CAS_TIMING_P
GpuF0MMReg\:0x2610
2-4
MC_SEQ_CAS_TIMING_S
GpuF0MMReg\:0x2630
2-6
MC_SEQ_CK_PAD_CNTL_D0_I0
GpuF0MMReg\:0x266C
2-25
MC_SEQ_CK_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2670
2-25
MC_SEQ_CK_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2768
2-37
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-42
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-8 Memory Controller Registers Sorted by Name
Register Name
(Continued)
Address
MC_SEQ_CK_PAD_CNTL_D1_I1
GpuF0MMReg\:0x276C
Page
2-37
MC_SEQ_CMD
GpuF0MMReg\:0x26C4
2-8
MC_SEQ_CMD_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2674
2-26
MC_SEQ_CMD_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2678
2-26
MC_SEQ_CMD_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2770
2-37
MC_SEQ_CMD_PAD_CNTL_D1_I1
GpuF0MMReg\:0x2774
2-38
MC_SEQ_CNTL
GpuF0MMReg\:0x2600
2-2
MC_SEQ_DQ_PAD_CNTL_D0_I0
GpuF0MMReg\:0x267C
2-26
MC_SEQ_DQ_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2680
2-26
MC_SEQ_DQ_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2778
2-38
MC_SEQ_DQ_PAD_CNTL_D1_I1
GpuF0MMReg\:0x277C
2-38
MC_SEQ_DRAM
GpuF0MMReg\:0x2608
2-2
MC_SEQ_GENERAL_CONFIG
GpuF0MMReg\:0x26D8
2-48
MC_SEQ_IO_CTL_D0
GpuF0MMReg\:0x265C
2-23
MC_SEQ_IO_CTL_D1
GpuF0MMReg\:0x2660
2-23
MC_SEQ_IO_CTL_UNUSED
GpuF0MMReg\:0x2898
2-24
MC_SEQ_MISC_TIMING_B
GpuF0MMReg\:0x2624
2-5
MC_SEQ_MISC_TIMING_C
GpuF0MMReg\:0x2644
2-7
MC_SEQ_MISC_TIMING_P
GpuF0MMReg\:0x2614
2-4
MC_SEQ_MISC_TIMING_S
GpuF0MMReg\:0x2634
2-6
MC_SEQ_MISC_TIMING2_B
GpuF0MMReg\:0x2628
2-5
MC_SEQ_MISC_TIMING2_C
GpuF0MMReg\:0x2648
2-8
MC_SEQ_MISC_TIMING2_P
GpuF0MMReg\:0x2618
2-4
MC_SEQ_MISC_TIMING2_S
GpuF0MMReg\:0x2638
2-7
MC_SEQ_NPL_CTL_D0
GpuF0MMReg\:0x2664
2-24
MC_SEQ_NPL_CTL_D1
GpuF0MMReg\:0x2668
2-24
MC_SEQ_QS_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2684
2-27
MC_SEQ_QS_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2688
2-27
MC_SEQ_QS_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2780
2-38
MC_SEQ_QS_PAD_CNTL_D1_I1
GpuF0MMReg\:0x2784
2-39
MC_SEQ_RAS_TIMING_B
GpuF0MMReg\:0x261C
2-5
MC_SEQ_RAS_TIMING_C
GpuF0MMReg\:0x263C
2-7
MC_SEQ_RAS_TIMING_P
GpuF0MMReg\:0x260C
2-4
MC_SEQ_RAS_TIMING_S
GpuF0MMReg\:0x262C
2-6
MC_SEQ_RD_CTL_D0_B
GpuF0MMReg\:0x2694
2-14
MC_SEQ_RD_CTL_D0_C
GpuF0MMReg\:0x26B4
2-20
MC_SEQ_RD_CTL_D0_P
GpuF0MMReg\:0x264C
2-11
MC_SEQ_RD_CTL_D0_S
GpuF0MMReg\:0x26A4
2-17
MC_SEQ_RD_CTL_D1_B
GpuF0MMReg\:0x2698
2-15
MC_SEQ_RD_CTL_D1_C
GpuF0MMReg\:0x26B8
2-21
MC_SEQ_RD_CTL_D1_P
GpuF0MMReg\:0x2650
2-12
MC_SEQ_RD_CTL_D1_S
GpuF0MMReg\:0x26A8
2-18
MC_SEQ_RS_CNTL
GpuF0MMReg\:0x26DC
2-48
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-43
Table A-8 Memory Controller Registers Sorted by Name
Register Name
(Continued)
Address
Page
MC_SEQ_STATUS_M
GpuF0MMReg\:0x26C8
2-49
MC_SEQ_STATUS_S
GpuF0MMReg\:0x288C
2-49
MC_SEQ_WR_CTL_D0_B
GpuF0MMReg\:0x269C
2-17
MC_SEQ_WR_CTL_D0_C
GpuF0MMReg\:0x26BC
2-22
MC_SEQ_WR_CTL_D0_P
GpuF0MMReg\:0x2654
2-14
MC_SEQ_WR_CTL_D0_S
GpuF0MMReg\:0x26AC
2-19
MC_SEQ_WR_CTL_D1_B
GpuF0MMReg\:0x26A0
2-17
MC_SEQ_WR_CTL_D1_C
GpuF0MMReg\:0x26C0
2-23
MC_SEQ_WR_CTL_D1_P
GpuF0MMReg\:0x2658
2-14
MC_SEQ_WR_CTL_D1_S
GpuF0MMReg\:0x26B0
2-20
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-44
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.10
Memory Controller Registers Sorted By Address
Table A-9 Memory Controller Registers Sorted by Address
Register Name
MC_SEQ_CNTL
Address
GpuF0MMReg\:0x2600
Page
2-2
MC_SEQ_DRAM
GpuF0MMReg\:0x2608
2-2
MC_SEQ_RAS_TIMING_P
GpuF0MMReg\:0x260C
2-4
MC_SEQ_CAS_TIMING_P
GpuF0MMReg\:0x2610
2-4
MC_SEQ_MISC_TIMING_P
GpuF0MMReg\:0x2614
2-4
MC_SEQ_MISC_TIMING2_P
GpuF0MMReg\:0x2618
2-4
MC_SEQ_RAS_TIMING_B
GpuF0MMReg\:0x261C
2-5
MC_SEQ_CAS_TIMING_B
GpuF0MMReg\:0x2620
2-5
MC_SEQ_MISC_TIMING_B
GpuF0MMReg\:0x2624
2-5
MC_SEQ_MISC_TIMING2_B
GpuF0MMReg\:0x2628
2-5
MC_SEQ_RAS_TIMING_S
GpuF0MMReg\:0x262C
2-6
MC_SEQ_CAS_TIMING_S
GpuF0MMReg\:0x2630
2-6
MC_SEQ_MISC_TIMING_S
GpuF0MMReg\:0x2634
2-6
MC_SEQ_MISC_TIMING2_S
GpuF0MMReg\:0x2638
2-7
MC_SEQ_RAS_TIMING_C
GpuF0MMReg\:0x263C
2-7
MC_SEQ_CAS_TIMING_C
GpuF0MMReg\:0x2640
2-7
MC_SEQ_MISC_TIMING_C
GpuF0MMReg\:0x2644
2-7
MC_SEQ_MISC_TIMING2_C
GpuF0MMReg\:0x2648
2-8
MC_SEQ_RD_CTL_D0_P
GpuF0MMReg\:0x264C
2-11
MC_SEQ_RD_CTL_D1_P
GpuF0MMReg\:0x2650
2-12
MC_SEQ_WR_CTL_D0_P
GpuF0MMReg\:0x2654
2-14
MC_SEQ_WR_CTL_D1_P
GpuF0MMReg\:0x2658
2-14
MC_SEQ_IO_CTL_D0
GpuF0MMReg\:0x265C
2-23
MC_SEQ_IO_CTL_D1
GpuF0MMReg\:0x2660
2-23
MC_SEQ_NPL_CTL_D0
GpuF0MMReg\:0x2664
2-24
MC_SEQ_NPL_CTL_D1
GpuF0MMReg\:0x2668
2-24
MC_SEQ_CK_PAD_CNTL_D0_I0
GpuF0MMReg\:0x266C
2-25
MC_SEQ_CK_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2670
2-25
MC_SEQ_CMD_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2674
2-26
MC_SEQ_CMD_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2678
2-26
MC_SEQ_DQ_PAD_CNTL_D0_I0
GpuF0MMReg\:0x267C
2-26
MC_SEQ_DQ_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2680
2-26
MC_SEQ_QS_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2684
2-27
MC_SEQ_QS_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2688
2-27
MC_SEQ_A_PAD_CNTL_D0_I0
GpuF0MMReg\:0x268C
2-27
MC_SEQ_A_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2690
2-27
MC_SEQ_RD_CTL_D0_B
GpuF0MMReg\:0x2694
2-14
MC_SEQ_RD_CTL_D1_B
GpuF0MMReg\:0x2698
2-15
MC_SEQ_WR_CTL_D0_B
GpuF0MMReg\:0x269C
2-17
MC_SEQ_WR_CTL_D1_B
GpuF0MMReg\:0x26A0
2-17
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-45
Table A-9 Memory Controller Registers Sorted by Address
Register Name
(Continued)
Address
Page
MC_SEQ_RD_CTL_D0_S
GpuF0MMReg\:0x26A4
2-17
MC_SEQ_RD_CTL_D1_S
GpuF0MMReg\:0x26A8
2-18
MC_SEQ_WR_CTL_D0_S
GpuF0MMReg\:0x26AC
2-19
MC_SEQ_WR_CTL_D1_S
GpuF0MMReg\:0x26B0
2-20
MC_SEQ_RD_CTL_D0_C
GpuF0MMReg\:0x26B4
2-20
MC_SEQ_RD_CTL_D1_C
GpuF0MMReg\:0x26B8
2-21
MC_SEQ_WR_CTL_D0_C
GpuF0MMReg\:0x26BC
2-22
MC_SEQ_WR_CTL_D1_C
GpuF0MMReg\:0x26C0
2-23
MC_SEQ_CMD
GpuF0MMReg\:0x26C4
2-8
MC_SEQ_STATUS_M
GpuF0MMReg\:0x26C8
2-49
MC_PMG_CMD
GpuF0MMReg\:0x26CC
2-8
MC_PMG_CFG
GpuF0MMReg\:0x26D0
2-9
MC_IMP_CNTL
GpuF0MMReg\:0x26D4
2-10
MC_SEQ_GENERAL_CONFIG
GpuF0MMReg\:0x26D8
2-48
MC_SEQ_RS_CNTL
GpuF0MMReg\:0x26DC
2-48
MC_IO_RD_STR_NCNTL_B0_D0
GpuF0MMReg\:0x26E8
2-35
MC_IO_RD_STR_NCNTL_B2_D0
GpuF0MMReg\:0x26F8
2-35
MC_IO_PAD_CNTL
GpuF0MMReg\:0x2700
2-11
MC_IO_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2704
2-28
MC_IO_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2708
2-28
MC_IO_RD_DQ_CNTL_D0_I0
GpuF0MMReg\:0x2710
2-29
MC_IO_RD_DQ_CNTL_D0_I1
GpuF0MMReg\:0x2714
2-29
MC_IO_RD_QS_CNTL_D0_I0
GpuF0MMReg\:0x2718
2-30
MC_IO_RD_QS_CNTL_D0_I1
GpuF0MMReg\:0x271C
2-30
MC_IO_RD_QS2_CNTL_D0_I0
GpuF0MMReg\:0x2720
2-30
MC_IO_RD_QS2_CNTL_D0_I1
GpuF0MMReg\:0x2724
2-30
MC_IO_WR_CNTL_D0_I0
GpuF0MMReg\:0x2728
2-30
MC_IO_WR_CNTL_D0_I1
GpuF0MMReg\:0x272C
2-31
MC_IO_CK_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2730
2-31
MC_IO_CK_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2734
2-31
MC_IO_CMD_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2738
2-31
MC_IO_CMD_PAD_CNTL_D0_I1
GpuF0MMReg\:0x273C
2-32
MC_IO_DQ_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2740
2-32
MC_IO_DQ_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2744
2-32
MC_IO_QS_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2748
2-33
MC_IO_QS_PAD_CNTL_D0_I1
GpuF0MMReg\:0x274C
2-33
MC_IO_A_PAD_CNTL_D0_I0
GpuF0MMReg\:0x2750
2-33
MC_IO_A_PAD_CNTL_D0_I1
GpuF0MMReg\:0x2754
2-34
MC_IO_WR_DQ_CNTL_D0_I0
GpuF0MMReg\:0x2758
2-34
MC_IO_WR_DQ_CNTL_D0_I1
GpuF0MMReg\:0x275C
2-34
MC_IO_WR_QS_CNTL_D0_I0
GpuF0MMReg\:0x2760
2-34
MC_IO_WR_QS_CNTL_D0_I1
GpuF0MMReg\:0x2764
2-34
MC_SEQ_CK_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2768
2-37
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-46
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-9 Memory Controller Registers Sorted by Address
Register Name
(Continued)
Address
Page
MC_SEQ_CK_PAD_CNTL_D1_I1
GpuF0MMReg\:0x276C
2-37
MC_SEQ_CMD_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2770
2-37
MC_SEQ_CMD_PAD_CNTL_D1_I1
GpuF0MMReg\:0x2774
2-38
MC_SEQ_DQ_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2778
2-38
MC_SEQ_DQ_PAD_CNTL_D1_I1
GpuF0MMReg\:0x277C
2-38
MC_SEQ_QS_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2780
2-38
MC_SEQ_QS_PAD_CNTL_D1_I1
GpuF0MMReg\:0x2784
2-39
MC_SEQ_A_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2788
2-39
MC_SEQ_A_PAD_CNTL_D1_I1
GpuF0MMReg\:0x278C
2-39
MC_IO_PAD_CNTL_D1_I0
GpuF0MMReg\:0x2790
2-39
MC_IO_PAD_CNTL_D1_I1
GpuF0MMReg\:0x2794
2-40
MC_IO_RD_DQ_CNTL_D1_I0
GpuF0MMReg\:0x2798
2-41
MC_IO_RD_DQ_CNTL_D1_I1
GpuF0MMReg\:0x279C
2-41
MC_IO_RD_QS_CNTL_D1_I0
GpuF0MMReg\:0x27A0
2-41
MC_IO_RD_QS_CNTL_D1_I1
GpuF0MMReg\:0x27A4
2-42
MC_IO_RD_QS2_CNTL_D1_I0
GpuF0MMReg\:0x27A8
2-42
MC_IO_RD_QS2_CNTL_D1_I1
GpuF0MMReg\:0x27AC
2-42
MC_IO_WR_CNTL_D1_I0
GpuF0MMReg\:0x27B0
2-42
MC_IO_WR_CNTL_D1_I1
GpuF0MMReg\:0x27B4
2-42
MC_IO_CK_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27B8
2-43
MC_IO_CK_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27BC
2-43
MC_IO_CMD_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27C0
2-43
MC_IO_CMD_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27C4
2-43
MC_IO_DQ_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27C8
2-44
MC_IO_DQ_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27CC
2-44
MC_IO_QS_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27D0
2-44
MC_IO_QS_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27D4
2-45
MC_IO_A_PAD_CNTL_D1_I0
GpuF0MMReg\:0x27D8
2-45
MC_IO_A_PAD_CNTL_D1_I1
GpuF0MMReg\:0x27DC
2-45
MC_IO_WR_DQ_CNTL_D1_I0
GpuF0MMReg\:0x27E0
2-46
MC_IO_WR_DQ_CNTL_D1_I1
GpuF0MMReg\:0x27E4
2-46
MC_IO_WR_QS_CNTL_D1_I0
GpuF0MMReg\:0x27E8
2-46
MC_IO_WR_QS_CNTL_D1_I1
GpuF0MMReg\:0x27EC
2-46
MC_IO_PAD_CNTL_D0
GpuF0MMReg\:0x27F0
2-25
MC_IO_PAD_CNTL_D1
GpuF0MMReg\:0x27F4
2-25
MC_IO_RD_STR_NCNTL_B3_D0
GpuF0MMReg\:0x27F8
2-35
MC_IO_RD_STR_NCNTL_B4_D0
GpuF0MMReg\:0x2800
2-36
MC_IO_RD_STR_NCNTL_B5_D0
GpuF0MMReg\:0x2808
2-36
MC_IO_RD_STR_NCNTL_B1_D0
GpuF0MMReg\:0x280C
2-35
MC_IO_RD_STR_NCNTL_B6_D0
GpuF0MMReg\:0x2810
2-36
MC_IO_RD_STR_NCNTL_B7_D0
GpuF0MMReg\:0x2818
2-37
MC_IO_RD_STR_NCNTL_B0_D1
GpuF0MMReg\:0x2820
2-46
MC_IO_RD_STR_NCNTL_B1_D1
GpuF0MMReg\:0x2828
2-46
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-47
Table A-9 Memory Controller Registers Sorted by Address
Register Name
(Continued)
Address
Page
MC_IO_RD_STR_NCNTL_B2_D1
GpuF0MMReg\:0x2830
2-47
MC_IO_RD_STR_NCNTL_B3_D1
GpuF0MMReg\:0x2838
2-47
MC_IO_RD_STR_NCNTL_B4_D1
GpuF0MMReg\:0x2840
2-47
MC_IO_RD_STR_NCNTL_B5_D1
GpuF0MMReg\:0x2848
2-47
MC_IO_RD_STR_NCNTL_B6_D1
GpuF0MMReg\:0x2850
2-48
MC_IO_RD_STR_NCNTL_B7_D1
GpuF0MMReg\:0x2858
2-48
MC_IMP_STATUS
GpuF0MMReg\:0x2874
2-10
MC_IMP_DEBUG
GpuF0MMReg\:0x2878
2-10
MC_NPL_STATUS
GpuF0MMReg\:0x2888
2-50
MC_SEQ_STATUS_S
GpuF0MMReg\:0x288C
2-49
MC_SEQ_IO_CTL_UNUSED
GpuF0MMReg\:0x2898
2-24
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-48
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.11
PCI-E Registers Sorted By Name
Table A-10 PCI-E Registers Sorted by Name
Register Name
PCIE_CI_CNTL
Address
Page
PCIEIND\:0x20
2-54
GpuF0MMReg\:0x34
GpuIOReg\:0x34
2-54
PCIEIND_P\:0x6A
2-66
GpuF0MMReg\:0x30
GpuIOReg\:0x30
2-54
PCIE_LC_CNTL
PCIEIND_P\:0xA0
2-69
PCIE_LC_CNTL2
PCIEIND_P\:0xB1
2-70
PCIE_LC_LINK_WIDTH_CNTL
PCIEIND_P\:0xA2
2-71
PCIE_LC_N_FTS_CNTL
PCIEIND_P\:0xA3
2-71
PCIE_LC_STATE0
PCIEIND_P\:0xA5
2-72
PCIE_LC_STATE1
PCIEIND_P\:0xA6
2-72
PCIE_LC_STATE10
PCIEIND\:0x26
2-56
PCIE_LC_STATE11
PCIEIND\:0x27
2-56
PCIE_LC_STATE2
PCIEIND_P\:0xA7
2-72
PCIE_LC_STATE3
PCIEIND_P\:0xA8
2-72
PCIE_LC_STATE4
PCIEIND_P\:0xA9
2-72
PCIE_LC_STATE5
PCIEIND_P\:0xAA
2-73
PCIE_LC_STATE6
PCIEIND\:0x22
2-55
PCIE_LC_STATE7
PCIEIND\:0x23
2-55
PCIE_LC_STATE8
PCIEIND\:0x24
2-55
PCIE_DATA
PCIE_ERR_CNTL
PCIE_INDEX
PCIE_LC_STATE9
PCIEIND\:0x25
2-55
PCIE_P_BUF_STATUS
PCIEIND\:0x41
2-57
PCIE_P_CNTL
PCIEIND\:0x40
2-56
PCIE_P_DECODE_ERR_CNT_0
PCIEIND\:0xF0
2-63
PCIE_P_DECODE_ERR_CNT_1
PCIEIND\:0xF1
2-63
PCIE_P_DECODE_ERR_CNT_10
PCIEIND\:0xFA
2-64
PCIE_P_DECODE_ERR_CNT_11
PCIEIND\:0xFB
2-64
PCIE_P_DECODE_ERR_CNT_12
PCIEIND\:0xFC
2-65
PCIE_P_DECODE_ERR_CNT_13
PCIEIND\:0xFD
2-65
PCIE_P_DECODE_ERR_CNT_14
PCIEIND\:0xFE
2-65
PCIE_P_DECODE_ERR_CNT_15
PCIEIND\:0xFF
2-65
PCIE_P_DECODE_ERR_CNT_2
PCIEIND\:0xF2
2-63
PCIE_P_DECODE_ERR_CNT_3
PCIEIND\:0xF3
2-63
PCIE_P_DECODE_ERR_CNT_4
PCIEIND\:0xF4
2-63
PCIE_P_DECODE_ERR_CNT_5
PCIEIND\:0xF5
2-63
PCIE_P_DECODE_ERR_CNT_6
PCIEIND\:0xF6
2-64
PCIE_P_DECODE_ERR_CNT_7
PCIEIND\:0xF7
2-64
PCIE_P_DECODE_ERR_CNT_8
PCIEIND\:0xF8
2-64
PCIE_P_DECODE_ERR_CNT_9
PCIEIND\:0xF9
2-64
PCIE_P_DECODE_ERR_CNTL
PCIEIND\:0xEF
2-62
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-49
Table A-10 PCI-E Registers Sorted by Name
(Continued)
Register Name
Address
Page
PCIE_P_DECODER_STATUS
PCIEIND\:0x42
2-58
PCIE_P_IMP_CNTL_STRENGTH
PCIEIND\:0x60
2-61
PCIE_P_IMP_CNTL_UPDATE
PCIEIND\:0x61
2-62
PCIE_P_MISC_DEBUG_STATUS
PCIEIND\:0x43
2-60
PCIE_P_PAD_MISC_CNTL
PCIEIND\:0x63
2-62
PCIE_P_STR_CNTL_UPDATE
PCIEIND\:0x62
2-62
PCIE_P_SYMSYNC_CTL
PCIEIND\:0x46
2-61
PCIE_RX_CNTL
PCIEIND_P\:0x70
2-67
PCIE_RX_CREDITS_ALLOCATED_CPL
PCIEIND_P\:0x82
2-68
PCIE_RX_CREDITS_ALLOCATED_NP
PCIEIND_P\:0x81
2-67
PCIE_RX_CREDITS_ALLOCATED_P
PCIEIND_P\:0x80
2-67
PCIE_RX_CREDITS_RECEIVED_CPL
PCIEIND_P\:0x85
2-68
PCIE_RX_CREDITS_RECEIVED_NP
PCIEIND_P\:0x84
2-68
PCIE_RX_CREDITS_RECEIVED_P
PCIEIND_P\:0x83
2-68
PCIE_RX_NUM_NACK
PCIEIND\:0xE
2-54
PCIE_RX_NUM_NACK_GENERATED
PCIEIND\:0xF
2-54
PCIE_TX_CNTL
PCIEIND_P\:0x20
2-65
PCIE_TX_REPLAY
PCIEIND_P\:0x25
2-66
PCIE_TX_SEQ
PCIEIND_P\:0x24
2-66
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-50
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.12
PCI-E Registers Sorted By Address
Table A-11 PCI-E Registers Sorted by Address
Register Name
Address
Page
PCIE_INDEX
GpuF0MMReg\:0x30
GpuIOReg\:0x30
2-54
PCIE_DATA
GpuF0MMReg\:0x34
GpuIOReg\:0x34
2-54
PCIE_CI_CNTL
PCIEIND\:0x20
2-54
PCIE_LC_STATE6
PCIEIND\:0x22
2-55
PCIE_LC_STATE7
PCIEIND\:0x23
2-55
PCIE_LC_STATE8
PCIEIND\:0x24
2-55
PCIE_LC_STATE9
PCIEIND\:0x25
2-55
PCIE_LC_STATE10
PCIEIND\:0x26
2-56
PCIE_LC_STATE11
PCIEIND\:0x27
2-56
PCIE_P_CNTL
PCIEIND\:0x40
2-56
PCIE_P_BUF_STATUS
PCIEIND\:0x41
2-57
PCIE_P_DECODER_STATUS
PCIEIND\:0x42
2-58
PCIE_P_MISC_DEBUG_STATUS
PCIEIND\:0x43
2-60
PCIE_P_SYMSYNC_CTL
PCIEIND\:0x46
2-61
PCIE_P_IMP_CNTL_STRENGTH
PCIEIND\:0x60
2-61
PCIE_P_IMP_CNTL_UPDATE
PCIEIND\:0x61
2-62
PCIE_P_STR_CNTL_UPDATE
PCIEIND\:0x62
2-62
PCIE_P_PAD_MISC_CNTL
PCIEIND\:0x63
2-62
PCIE_RX_NUM_NACK
PCIEIND\:0xE
2-54
PCIEIND\:0xEF
2-62
PCIE_RX_NUM_NACK_GENERATED
PCIEIND\:0xF
2-54
PCIE_P_DECODE_ERR_CNT_0
PCIEIND\:0xF0
2-63
PCIE_P_DECODE_ERR_CNT_1
PCIEIND\:0xF1
2-63
PCIE_P_DECODE_ERR_CNT_2
PCIEIND\:0xF2
2-63
PCIE_P_DECODE_ERR_CNT_3
PCIEIND\:0xF3
2-63
PCIE_P_DECODE_ERR_CNT_4
PCIEIND\:0xF4
2-63
PCIE_P_DECODE_ERR_CNT_5
PCIEIND\:0xF5
2-63
PCIE_P_DECODE_ERR_CNT_6
PCIEIND\:0xF6
2-64
PCIE_P_DECODE_ERR_CNT_7
PCIEIND\:0xF7
2-64
PCIE_P_DECODE_ERR_CNT_8
PCIEIND\:0xF8
2-64
PCIE_P_DECODE_ERR_CNT_9
PCIEIND\:0xF9
2-64
PCIE_P_DECODE_ERR_CNT_10
PCIEIND\:0xFA
2-64
PCIE_P_DECODE_ERR_CNT_11
PCIEIND\:0xFB
2-64
PCIE_P_DECODE_ERR_CNT_12
PCIEIND\:0xFC
2-65
PCIE_P_DECODE_ERR_CNT_13
PCIEIND\:0xFD
2-65
PCIE_P_DECODE_ERR_CNT_14
PCIEIND\:0xFE
2-65
PCIE_P_DECODE_ERR_CNT_15
PCIEIND\:0xFF
2-65
PCIE_TX_CNTL
PCIEIND_P\:0x20
2-65
PCIE_TX_SEQ
PCIEIND_P\:0x24
2-66
PCIE_P_DECODE_ERR_CNTL
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-51
Table A-11 PCI-E Registers Sorted by Address
(Continued)
Register Name
Address
Page
PCIE_TX_REPLAY
PCIEIND_P\:0x25
2-66
PCIE_ERR_CNTL
PCIEIND_P\:0x6A
2-66
PCIE_RX_CNTL
PCIEIND_P\:0x70
2-67
PCIE_RX_CREDITS_ALLOCATED_P
PCIEIND_P\:0x80
2-67
PCIE_RX_CREDITS_ALLOCATED_NP
PCIEIND_P\:0x81
2-67
PCIE_RX_CREDITS_ALLOCATED_CPL
PCIEIND_P\:0x82
2-68
PCIE_RX_CREDITS_RECEIVED_P
PCIEIND_P\:0x83
2-68
PCIE_RX_CREDITS_RECEIVED_NP
PCIEIND_P\:0x84
2-68
PCIE_RX_CREDITS_RECEIVED_CPL
PCIEIND_P\:0x85
2-68
PCIE_LC_CNTL
PCIEIND_P\:0xA0
2-69
PCIE_LC_LINK_WIDTH_CNTL
PCIEIND_P\:0xA2
2-71
PCIE_LC_N_FTS_CNTL
PCIEIND_P\:0xA3
2-71
PCIE_LC_STATE0
PCIEIND_P\:0xA5
2-72
PCIE_LC_STATE1
PCIEIND_P\:0xA6
2-72
PCIE_LC_STATE2
PCIEIND_P\:0xA7
2-72
PCIE_LC_STATE3
PCIEIND_P\:0xA8
2-72
PCIE_LC_STATE4
PCIEIND_P\:0xA9
2-72
PCIE_LC_STATE5
PCIEIND_P\:0xAA
2-73
PCIE_LC_CNTL2
PCIEIND_P\:0xB1
2-70
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-52
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.13
VIP Registers Sorted By Name
Table A-12 VIP Registers Sorted by Name
Register Name
Address
Page
CAP_INT_CNTL
GpuF0MMReg\:0xB08
2-115
CAP_INT_STATUS
GpuF0MMReg\:0xB0C
2-116
CAP0_ANC_BUF01_BLOCK_CNT
GpuF0MMReg\:0xB74
2-123
CAP0_ANC_BUF23_BLOCK_CNT
GpuF0MMReg\:0xB7C
2-124
CAP0_ANC_H_WINDOW
GpuF0MMReg\:0xB64
2-122
CAP0_ANC0_OFFSET
GpuF0MMReg\:0xB5C
2-122
CAP0_ANC1_OFFSET
GpuF0MMReg\:0xB60
2-122
CAP0_ANC2_OFFSET
GpuF0MMReg\:0xB88
2-124
CAP0_ANC3_OFFSET
GpuF0MMReg\:0xB8C
2-124
CAP0_BUF_PITCH
GpuF0MMReg\:0xB30
2-118
CAP0_BUF_STATUS
GpuF0MMReg\:0xB70
2-123
CAP0_BUF0_EVEN_OFFSET
GpuF0MMReg\:0xB28
2-118
CAP0_BUF0_OFFSET
GpuF0MMReg\:0xB20
2-118
CAP0_BUF1_EVEN_OFFSET
GpuF0MMReg\:0xB2C
2-118
CAP0_BUF1_OFFSET
GpuF0MMReg\:0xB24
2-118
CAP0_CONFIG
GpuF0MMReg\:0xB58
2-121
CAP0_DEBUG
GpuF0MMReg\:0xB54
2-120
CAP0_H_WINDOW
GpuF0MMReg\:0xB38
2-119
CAP0_ONESHOT_BUF_OFFSET
GpuF0MMReg\:0xB6C
2-123
CAP0_PORT_MODE_CNTL
GpuF0MMReg\:0xB4C
2-120
CAP0_TRIG_CNTL
GpuF0MMReg\:0xB50
2-120
CAP0_V_WINDOW
GpuF0MMReg\:0xB34
2-119
CAP0_VBI_H_WINDOW
GpuF0MMReg\:0xB48
2-119
CAP0_VBI_V_WINDOW
GpuF0MMReg\:0xB44
2-119
CAP0_VBI0_OFFSET
GpuF0MMReg\:0xB3C
2-119
CAP0_VBI1_OFFSET
GpuF0MMReg\:0xB40
2-119
CAP0_VBI2_OFFSET
GpuF0MMReg\:0xB80
2-124
CAP0_VBI3_OFFSET
GpuF0MMReg\:0xB84
2-124
CAP0_VIDEO_SYNC_TEST
GpuF0MMReg\:0xB68
2-122
DC_I2C_ARBITRATION
GpuF0MMReg\:0x7D34
2-98
DC_I2C_CONTROL
GpuF0MMReg\:0x7D30
2-97
DC_I2C_DATA
GpuF0MMReg\:0x7D74
2-105
DC_I2C_DDC1_HW_STATUS
GpuF0MMReg\:0x7D40
2-99
DC_I2C_DDC1_SETUP
GpuF0MMReg\:0x7D50
2-100
DC_I2C_DDC1_SPEED
GpuF0MMReg\:0x7D4C
2-100
DC_I2C_DDC2_HW_STATUS
GpuF0MMReg\:0x7D44
2-100
DC_I2C_DDC2_SETUP
GpuF0MMReg\:0x7D58
2-101
DC_I2C_DDC2_SPEED
GpuF0MMReg\:0x7D54
2-101
DC_I2C_DDC3_HW_STATUS
GpuF0MMReg\:0x7D48
2-100
DC_I2C_DDC3_SETUP
GpuF0MMReg\:0x7D60
2-102
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-53
Table A-12 VIP Registers Sorted by Name
(Continued)
Register Name
DC_I2C_DDC3_SPEED
Address
Page
GpuF0MMReg\:0x7D5C
2-102
DC_I2C_DDC4_HW_STATUS
GpuF0MMReg\:0x7DB0
2-108
DC_I2C_DDC4_SETUP
GpuF0MMReg\:0x7DBC
2-109
DC_I2C_DDC4_SPEED
GpuF0MMReg\:0x7DB4
2-109
DC_I2C_INTERRUPT_CONTROL
GpuF0MMReg\:0x7D38
2-98
DC_I2C_SW_STATUS
GpuF0MMReg\:0x7D3C
2-99
DC_I2C_TRANSACTION0
GpuF0MMReg\:0x7D64
2-103
DC_I2C_TRANSACTION1
GpuF0MMReg\:0x7D68
2-103
DC_I2C_TRANSACTION2
GpuF0MMReg\:0x7D6C
2-104
DC_I2C_TRANSACTION3
GpuF0MMReg\:0x7D70
2-104
DMA_VIP0_TABLE_ADDR
GpuF0MMReg\:0xA20
2-129
DMA_VIP1_TABLE_ADDR
GpuF0MMReg\:0xA30
2-129
DMA_VIP2_TABLE_ADDR
GpuF0MMReg\:0xA40
2-129
DMA_VIP3_TABLE_ADDR
GpuF0MMReg\:0xA50
2-129
DMA_VIPH_ABORT
GpuF0MMReg\:0xA88
2-130
DMA_VIPH_CHUNK_0
GpuF0MMReg\:0xA18
2-128
DMA_VIPH_CHUNK_1_VAL
GpuF0MMReg\:0xA1C
2-128
DMA_VIPH_MISC_CNTL
GpuF0MMReg\:0xA14
2-127
DMA_VIPH_STATUS
GpuF0MMReg\:0xA10
2-127
DMA_VIPH0_ACTIVE
GpuF0MMReg\:0xA24
2-129
DMA_VIPH0_COMMAND
GpuF0MMReg\:0xA00
2-125
DMA_VIPH1_ACTIVE
GpuF0MMReg\:0xA34
2-129
DMA_VIPH1_COMMAND
GpuF0MMReg\:0xA04
2-125
DMA_VIPH2_ACTIVE
GpuF0MMReg\:0xA44
2-129
DMA_VIPH2_COMMAND
GpuF0MMReg\:0xA08
2-126
DMA_VIPH3_ACTIVE
GpuF0MMReg\:0xA54
2-130
DMA_VIPH3_COMMAND
GpuF0MMReg\:0xA0C
2-126
EXTERN_TRIG_CNTL
GpuF0MMReg\:0xE54
2-136
GENERIC_I2C_CONTROL
GpuF0MMReg\:0x7D80
2-105
GENERIC_I2C_DATA
GpuF0MMReg\:0x7D98
2-107
GENERIC_I2C_INTERRUPT_CONTROL
GpuF0MMReg\:0x7D84
2-105
GENERIC_I2C_PIN_DEBUG
GpuF0MMReg\:0x7DA0
2-108
GENERIC_I2C_PIN_SELECTION
GpuF0MMReg\:0x7D9C
2-108
GENERIC_I2C_SETUP
GpuF0MMReg\:0x7D90
2-106
GENERIC_I2C_SPEED
GpuF0MMReg\:0x7D8C
2-106
GENERIC_I2C_STATUS
GpuF0MMReg\:0x7D88
2-106
GENERIC_I2C_TRANSACTION
GpuF0MMReg\:0x7D94
2-107
GPIOPAD_A
GpuF0MMReg\:0x179C
2-131
GPIOPAD_EN
GpuF0MMReg\:0x17A0
2-131
GPIOPAD_EXTERN_TRIG_CNTL
GpuF0MMReg\:0x17C4
2-132
GPIOPAD_MASK
GpuF0MMReg\:0x1798
2-131
GPIOPAD_STRENGTH
GpuF0MMReg\:0x1794
2-131
GPIOPAD_Y
GpuF0MMReg\:0x17A4
2-131
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-54
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-12 VIP Registers Sorted by Name
Register Name
(Continued)
Address
Page
I2C_CNTL_0
GpuF0MMReg\:0xBC0
2-96
I2C_CNTL_1
GpuF0MMReg\:0xBC4
2-96
I2C_DATA
GpuF0MMReg\:0xBC8
2-97
ROM_CNTL
GpuF0MMReg\:0x1600
2-136
ROM_DATA
GpuF0MMReg\:0xAC
GpuIOReg\:0xAC
2-137
ROM_INDEX
GpuF0MMReg\:0xA8
GpuIOReg\:0xA8
2-137
ROM_START
GpuF0MMReg\:0x1614
2-137
ROM_STATUS
GpuF0MMReg\:0x1608
2-136
VID_BUFFER_CONTROL
GpuF0MMReg\:0xB00
2-115
VIPH_CH0_ABCNT
GpuF0MMReg\:0xC30
2-112
VIPH_CH0_ADDR
GpuF0MMReg\:0xC10
2-110
VIPH_CH0_DATA
GpuF0MMReg\:0xC00
2-110
VIPH_CH0_SBCNT
GpuF0MMReg\:0xC20
2-111
VIPH_CH1_ABCNT
GpuF0MMReg\:0xC34
2-112
VIPH_CH1_ADDR
GpuF0MMReg\:0xC14
2-111
VIPH_CH1_DATA
GpuF0MMReg\:0xC04
2-110
VIPH_CH1_SBCNT
GpuF0MMReg\:0xC24
2-111
VIPH_CH2_ABCNT
GpuF0MMReg\:0xC38
2-112
VIPH_CH2_ADDR
GpuF0MMReg\:0xC18
2-111
VIPH_CH2_DATA
GpuF0MMReg\:0xC08
2-110
VIPH_CH2_SBCNT
GpuF0MMReg\:0xC28
2-112
VIPH_CH3_ABCNT
GpuF0MMReg\:0xC3C
2-112
VIPH_CH3_ADDR
GpuF0MMReg\:0xC1C
2-111
VIPH_CH3_DATA
GpuF0MMReg\:0xC0C
2-110
VIPH_CH3_SBCNT
GpuF0MMReg\:0xC2C
2-112
VIPH_CONTROL
GpuF0MMReg\:0xC40
2-113
VIPH_DMA_CHUNK
GpuF0MMReg\:0xC48
2-114
VIPH_DV_INT
GpuF0MMReg\:0xC4C
2-114
VIPH_DV_LAT
GpuF0MMReg\:0xC44
2-114
VIPH_REG_ADDR
GpuF0MMReg\:0xC80
2-109
VIPH_REG_DATA
GpuF0MMReg\:0xC84
2-110
VIPH_TIMEOUT_STAT
GpuF0MMReg\:0xC50
2-114
VIPPAD_A
GpuF0MMReg\:0xAC4
2-133
VIPPAD_EN
GpuF0MMReg\:0xAC8
2-134
VIPPAD_MASK
GpuF0MMReg\:0xAC0
2-132
VIPPAD_STRENGTH
GpuF0MMReg\:0xAD0
2-135
VIPPAD_Y
GpuF0MMReg\:0xACC
2-135
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-55
A.14
VIP Registers Sorted By Address
Table A-13 VIP Registers Sorted by Address
Register Name
Address
Page
ROM_CNTL
GpuF0MMReg\:0x1600
2-136
ROM_STATUS
GpuF0MMReg\:0x1608
2-136
ROM_START
GpuF0MMReg\:0x1614
2-137
GPIOPAD_STRENGTH
GpuF0MMReg\:0x1794
2-131
GPIOPAD_MASK
GpuF0MMReg\:0x1798
2-131
GPIOPAD_A
GpuF0MMReg\:0x179C
2-131
GPIOPAD_EN
GpuF0MMReg\:0x17A0
2-131
GPIOPAD_Y
GpuF0MMReg\:0x17A4
2-131
GPIOPAD_EXTERN_TRIG_CNTL
GpuF0MMReg\:0x17C4
2-132
DC_I2C_CONTROL
GpuF0MMReg\:0x7D30
2-97
DC_I2C_ARBITRATION
GpuF0MMReg\:0x7D34
2-98
DC_I2C_INTERRUPT_CONTROL
GpuF0MMReg\:0x7D38
2-98
DC_I2C_SW_STATUS
GpuF0MMReg\:0x7D3C
2-99
DC_I2C_DDC1_HW_STATUS
GpuF0MMReg\:0x7D40
2-99
DC_I2C_DDC2_HW_STATUS
GpuF0MMReg\:0x7D44
2-100
DC_I2C_DDC3_HW_STATUS
GpuF0MMReg\:0x7D48
2-100
DC_I2C_DDC1_SPEED
GpuF0MMReg\:0x7D4C
2-100
DC_I2C_DDC1_SETUP
GpuF0MMReg\:0x7D50
2-100
DC_I2C_DDC2_SPEED
GpuF0MMReg\:0x7D54
2-101
DC_I2C_DDC2_SETUP
GpuF0MMReg\:0x7D58
2-101
DC_I2C_DDC3_SPEED
GpuF0MMReg\:0x7D5C
2-102
DC_I2C_DDC3_SETUP
GpuF0MMReg\:0x7D60
2-102
DC_I2C_TRANSACTION0
GpuF0MMReg\:0x7D64
2-103
DC_I2C_TRANSACTION1
GpuF0MMReg\:0x7D68
2-103
DC_I2C_TRANSACTION2
GpuF0MMReg\:0x7D6C
2-104
DC_I2C_TRANSACTION3
GpuF0MMReg\:0x7D70
2-104
DC_I2C_DATA
GpuF0MMReg\:0x7D74
2-105
GENERIC_I2C_CONTROL
GpuF0MMReg\:0x7D80
2-105
GENERIC_I2C_INTERRUPT_CONTROL
GpuF0MMReg\:0x7D84
2-105
GENERIC_I2C_STATUS
GpuF0MMReg\:0x7D88
2-106
GENERIC_I2C_SPEED
GpuF0MMReg\:0x7D8C
2-106
GENERIC_I2C_SETUP
GpuF0MMReg\:0x7D90
2-106
GENERIC_I2C_TRANSACTION
GpuF0MMReg\:0x7D94
2-107
GENERIC_I2C_DATA
GpuF0MMReg\:0x7D98
2-107
GENERIC_I2C_PIN_SELECTION
GpuF0MMReg\:0x7D9C
2-108
GENERIC_I2C_PIN_DEBUG
GpuF0MMReg\:0x7DA0
2-108
DC_I2C_DDC4_HW_STATUS
GpuF0MMReg\:0x7DB0
2-108
DC_I2C_DDC4_SPEED
GpuF0MMReg\:0x7DB4
2-109
DC_I2C_DDC4_SETUP
GpuF0MMReg\:0x7DBC
2-109
DMA_VIPH0_COMMAND
GpuF0MMReg\:0xA00
2-125
DMA_VIPH1_COMMAND
GpuF0MMReg\:0xA04
2-125
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-56
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-13 VIP Registers Sorted by Address
Register Name
DMA_VIPH2_COMMAND
(Continued)
Address
GpuF0MMReg\:0xA08
Page
2-126
DMA_VIPH3_COMMAND
GpuF0MMReg\:0xA0C
2-126
DMA_VIPH_STATUS
GpuF0MMReg\:0xA10
2-127
DMA_VIPH_MISC_CNTL
GpuF0MMReg\:0xA14
2-127
DMA_VIPH_CHUNK_0
GpuF0MMReg\:0xA18
2-128
DMA_VIPH_CHUNK_1_VAL
GpuF0MMReg\:0xA1C
2-128
DMA_VIP0_TABLE_ADDR
GpuF0MMReg\:0xA20
2-129
DMA_VIPH0_ACTIVE
GpuF0MMReg\:0xA24
2-129
DMA_VIP1_TABLE_ADDR
GpuF0MMReg\:0xA30
2-129
DMA_VIPH1_ACTIVE
GpuF0MMReg\:0xA34
2-129
DMA_VIP2_TABLE_ADDR
GpuF0MMReg\:0xA40
2-129
DMA_VIPH2_ACTIVE
GpuF0MMReg\:0xA44
2-129
DMA_VIP3_TABLE_ADDR
GpuF0MMReg\:0xA50
2-129
DMA_VIPH3_ACTIVE
GpuF0MMReg\:0xA54
2-130
DMA_VIPH_ABORT
GpuF0MMReg\:0xA88
2-130
ROM_INDEX
GpuF0MMReg\:0xA8
GpuIOReg\:0xA8
2-137
VIPPAD_MASK
GpuF0MMReg\:0xAC0
2-132
VIPPAD_A
GpuF0MMReg\:0xAC4
2-133
VIPPAD_EN
GpuF0MMReg\:0xAC8
2-134
VIPPAD_Y
GpuF0MMReg\:0xACC
2-135
ROM_DATA
GpuF0MMReg\:0xAC
GpuIOReg\:0xAC
2-137
VIPPAD_STRENGTH
GpuF0MMReg\:0xAD0
2-135
VID_BUFFER_CONTROL
GpuF0MMReg\:0xB00
2-115
CAP_INT_CNTL
GpuF0MMReg\:0xB08
2-115
CAP_INT_STATUS
GpuF0MMReg\:0xB0C
2-116
CAP0_BUF0_OFFSET
GpuF0MMReg\:0xB20
2-118
CAP0_BUF1_OFFSET
GpuF0MMReg\:0xB24
2-118
CAP0_BUF0_EVEN_OFFSET
GpuF0MMReg\:0xB28
2-118
CAP0_BUF1_EVEN_OFFSET
GpuF0MMReg\:0xB2C
2-118
CAP0_BUF_PITCH
GpuF0MMReg\:0xB30
2-118
CAP0_V_WINDOW
GpuF0MMReg\:0xB34
2-119
CAP0_H_WINDOW
GpuF0MMReg\:0xB38
2-119
CAP0_VBI0_OFFSET
GpuF0MMReg\:0xB3C
2-119
CAP0_VBI1_OFFSET
GpuF0MMReg\:0xB40
2-119
CAP0_VBI_V_WINDOW
GpuF0MMReg\:0xB44
2-119
CAP0_VBI_H_WINDOW
GpuF0MMReg\:0xB48
2-119
CAP0_PORT_MODE_CNTL
GpuF0MMReg\:0xB4C
2-120
CAP0_TRIG_CNTL
GpuF0MMReg\:0xB50
2-120
CAP0_DEBUG
GpuF0MMReg\:0xB54
2-120
CAP0_CONFIG
GpuF0MMReg\:0xB58
2-121
CAP0_ANC0_OFFSET
GpuF0MMReg\:0xB5C
2-122
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-57
Table A-13 VIP Registers Sorted by Address
(Continued)
Register Name
CAP0_ANC1_OFFSET
Address
Page
GpuF0MMReg\:0xB60
2-122
CAP0_ANC_H_WINDOW
GpuF0MMReg\:0xB64
2-122
CAP0_VIDEO_SYNC_TEST
GpuF0MMReg\:0xB68
2-122
CAP0_ONESHOT_BUF_OFFSET
GpuF0MMReg\:0xB6C
2-123
CAP0_BUF_STATUS
GpuF0MMReg\:0xB70
2-123
CAP0_ANC_BUF01_BLOCK_CNT
GpuF0MMReg\:0xB74
2-123
CAP0_ANC_BUF23_BLOCK_CNT
GpuF0MMReg\:0xB7C
2-124
CAP0_VBI2_OFFSET
GpuF0MMReg\:0xB80
2-124
CAP0_VBI3_OFFSET
GpuF0MMReg\:0xB84
2-124
CAP0_ANC2_OFFSET
GpuF0MMReg\:0xB88
2-124
CAP0_ANC3_OFFSET
GpuF0MMReg\:0xB8C
2-124
I2C_CNTL_0
GpuF0MMReg\:0xBC0
2-96
I2C_CNTL_1
GpuF0MMReg\:0xBC4
2-96
I2C_DATA
GpuF0MMReg\:0xBC8
2-97
VIPH_CH0_DATA
GpuF0MMReg\:0xC00
2-110
VIPH_CH1_DATA
GpuF0MMReg\:0xC04
2-110
VIPH_CH2_DATA
GpuF0MMReg\:0xC08
2-110
VIPH_CH3_DATA
GpuF0MMReg\:0xC0C
2-110
VIPH_CH0_ADDR
GpuF0MMReg\:0xC10
2-110
VIPH_CH1_ADDR
GpuF0MMReg\:0xC14
2-111
VIPH_CH2_ADDR
GpuF0MMReg\:0xC18
2-111
VIPH_CH3_ADDR
GpuF0MMReg\:0xC1C
2-111
VIPH_CH0_SBCNT
GpuF0MMReg\:0xC20
2-111
VIPH_CH1_SBCNT
GpuF0MMReg\:0xC24
2-111
VIPH_CH2_SBCNT
GpuF0MMReg\:0xC28
2-112
VIPH_CH3_SBCNT
GpuF0MMReg\:0xC2C
2-112
VIPH_CH0_ABCNT
GpuF0MMReg\:0xC30
2-112
VIPH_CH1_ABCNT
GpuF0MMReg\:0xC34
2-112
VIPH_CH2_ABCNT
GpuF0MMReg\:0xC38
2-112
VIPH_CH3_ABCNT
GpuF0MMReg\:0xC3C
2-112
VIPH_CONTROL
GpuF0MMReg\:0xC40
2-113
VIPH_DV_LAT
GpuF0MMReg\:0xC44
2-114
VIPH_DMA_CHUNK
GpuF0MMReg\:0xC48
2-114
VIPH_DV_INT
GpuF0MMReg\:0xC4C
2-114
VIPH_TIMEOUT_STAT
GpuF0MMReg\:0xC50
2-114
VIPH_REG_ADDR
GpuF0MMReg\:0xC80
2-109
VIPH_REG_DATA
GpuF0MMReg\:0xC84
2-110
EXTERN_TRIG_CNTL
GpuF0MMReg\:0xE54
2-136
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-58
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.15
VGA ATTR Registers Sorted By Name
Table A-14 VGA ATTR Registers Sorted by Name
Register Name
Address
Page
ATTR00
VGAATTRIND\:0x0
2-153
ATTR01
VGAATTRIND\:0x1
2-153
ATTR02
VGAATTRIND\:0x2
2-154
ATTR03
VGAATTRIND\:0x3
2-154
ATTR04
VGAATTRIND\:0x4
2-154
ATTR05
VGAATTRIND\:0x5
2-154
ATTR06
VGAATTRIND\:0x6
2-154
ATTR07
VGAATTRIND\:0x7
2-155
ATTR08
VGAATTRIND\:0x8
2-155
ATTR09
VGAATTRIND\:0x9
2-155
ATTR0A
VGAATTRIND\:0xA
2-155
ATTR0B
VGAATTRIND\:0xB
2-155
ATTR0C
VGAATTRIND\:0xC
2-156
ATTR0D
VGAATTRIND\:0xD
2-156
ATTR0E
VGAATTRIND\:0xE
2-156
ATTR0F
VGAATTRIND\:0xF
2-156
ATTR10
VGAATTRIND\:0x10
2-156
ATTR11
VGAATTRIND\:0x11
2-157
ATTR12
VGAATTRIND\:0x12
2-157
ATTR13
VGAATTRIND\:0x13
2-158
ATTR14
VGAATTRIND\:0x14
2-158
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-59
A.16
VGA CRT Registers Sorted By Name
Table A-15 VGA CRT Registers Sorted by Name
Register Name
Address
Page
CRT00
VGACRTIND\:0x0
2-143
CRT01
VGACRTIND\:0x1
2-143
CRT02
VGACRTIND\:0x2
2-143
CRT03
VGACRTIND\:0x3
2-143
CRT04
VGACRTIND\:0x4
2-144
CRT05
VGACRTIND\:0x5
2-144
CRT06
VGACRTIND\:0x6
2-144
CRT07
VGACRTIND\:0x7
2-144
CRT08
VGACRTIND\:0x8
2-145
CRT09
VGACRTIND\:0x9
2-145
CRT0A
VGACRTIND\:0xA
2-146
CRT0B
VGACRTIND\:0xB
2-146
CRT0C
VGACRTIND\:0xC
2-146
CRT0D
VGACRTIND\:0xD
2-146
CRT0E
VGACRTIND\:0xE
2-147
CRT0F
VGACRTIND\:0xF
2-147
CRT10
VGACRTIND\:0x10
2-147
CRT11
VGACRTIND\:0x11
2-147
CRT12
VGACRTIND\:0x12
2-148
CRT13
VGACRTIND\:0x13
2-148
CRT14
VGACRTIND\:0x14
2-148
CRT15
VGACRTIND\:0x15
2-149
CRT16
VGACRTIND\:0x16
2-149
CRT17
VGACRTIND\:0x17
2-149
CRT18
VGACRTIND\:0x18
2-149
CRT1E
VGACRTIND\:0x1E
2-150
CRT1F
VGACRTIND\:0x1F
2-150
CRT22
VGACRTIND\:0x22
2-150
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-60
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.17
VGA GRPH Registers Sorted By Name
Table A-16 VGA GRPH Registers Sorted by Name
Register Name
Address
Page
GRA00
VGAGRPHIND\:0x0
2-150
GRA01
VGAGRPHIND\:0x1
2-151
GRA02
VGAGRPHIND\:0x2
2-151
GRA03
VGAGRPHIND\:0x3
2-151
GRA04
VGAGRPHIND\:0x4
2-151
GRA05
VGAGRPHIND\:0x5
2-151
GRA06
VGAGRPHIND\:0x6
2-152
GRA07
VGAGRPHIND\:0x7
2-152
GRA08
VGAGRPHIND\:0x8
2-152
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-61
A.18
VGA SEQ Registers Sorted By Name
Table A-17 VGA SEQ Registers Sorted by Name
Register Name
Address
Page
SEQ00
VGASEQIND\:0x0
2-141
SEQ01
VGASEQIND\:0x1
2-141
SEQ02
VGASEQIND\:0x2
2-142
SEQ03
VGASEQIND\:0x3
2-142
SEQ04
VGASEQIND\:0x4
2-142
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-62
© 2007 Advanced Micro Devices, Inc.
Proprietary
A.19
All Registers Sorted by Name
Table A-18 All Registers Sorted by Name
Register Name
Page
ADAPTER_ID
2-77
ADAPTER_ID_W
2-77
ATTR00
2-153
ATTR01
2-153
ATTR02
2-154
ATTR03
2-154
ATTR04
2-154
ATTR05
2-154
ATTR06
2-154
ATTR07
2-155
ATTR08
2-155
ATTR09
2-155
ATTR0A
2-155
ATTR0B
2-155
ATTR0C
2-156
ATTR0D
2-156
ATTR0E
2-156
ATTR0F
2-156
ATTR10
2-156
ATTR11
2-157
ATTR12
2-157
ATTR13
2-158
ATTR14
2-158
ATTRDR
2-153
ATTRDW
2-153
ATTRX
2-152
BASE_CLASS
2-75
BIST
2-76
BUS_CNTL
2-51
CACHE_LINE
2-76
CAP_INT_CNTL
2-115
CAP_INT_STATUS
2-116
CAP_PTR
2-76
CAP0_ANC_BUF01_BLOCK_CNT
2-123
CAP0_ANC_BUF23_BLOCK_CNT
2-124
CAP0_ANC_H_WINDOW
2-122
CAP0_ANC0_OFFSET
2-122
CAP0_ANC1_OFFSET
2-122
CAP0_ANC2_OFFSET
2-124
CAP0_ANC3_OFFSET
2-124
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-63
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
CAP0_BUF_PITCH
2-118
CAP0_BUF_STATUS
2-123
CAP0_BUF0_EVEN_OFFSET
2-118
CAP0_BUF0_OFFSET
2-118
CAP0_BUF1_EVEN_OFFSET
2-118
CAP0_BUF1_OFFSET
2-118
CAP0_CONFIG
2-121
CAP0_DEBUG
2-120
CAP0_H_WINDOW
2-119
CAP0_ONESHOT_BUF_OFFSET
2-123
CAP0_PORT_MODE_CNTL
2-120
CAP0_TRIG_CNTL
2-120
CAP0_V_WINDOW
2-119
CAP0_VBI_H_WINDOW
2-119
CAP0_VBI_V_WINDOW
2-119
CAP0_VBI0_OFFSET
2-119
CAP0_VBI1_OFFSET
2-119
CAP0_VBI2_OFFSET
2-124
CAP0_VBI3_OFFSET
2-124
CAP0_VIDEO_SYNC_TEST
2-122
CAPTURE_START_STATUS
2-325
CG_CLKPIN_CNTL
2-94
CG_MISC_REG
2-95
CG_TC_JTAG_0
2-94
CG_TC_JTAG_1
2-95
COMMAND
2-73
CONFIG_APER_SIZE
2-53
CONFIG_CNTL
2-52
CONFIG_MEMSIZE
2-52
CONFIG_REG_APER_SIZE
2-53
CRT00
2-143
CRT01
2-143
CRT02
2-143
CRT03
2-143
CRT04
2-144
CRT05
2-144
CRT06
2-144
CRT07
2-144
CRT08
2-145
CRT09
2-145
CRT0A
2-146
CRT0B
2-146
CRT0C
2-146
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-64
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
CRT0D
2-146
CRT0E
2-147
CRT0F
2-147
CRT10
2-147
CRT11
2-147
CRT12
2-148
CRT13
2-148
CRT14
2-148
CRT15
2-149
CRT16
2-149
CRT17
2-149
CRT18
2-149
CRT1E
2-150
CRT1F
2-150
CRT22
2-150
CRTC8_DATA
2-143
CRTC8_IDX
2-143
D1_MVP_AFR_FLIP_FIFO_CNTL
2-206
D1_MVP_AFR_FLIP_MODE
2-206
D1_MVP_FLIP_LINE_NUM_INSERT
2-207
D1COLOR_MATRIX_COEF_1_1
2-191
D1COLOR_MATRIX_COEF_1_2
2-192
D1COLOR_MATRIX_COEF_1_3
2-192
D1COLOR_MATRIX_COEF_1_4
2-192
D1COLOR_MATRIX_COEF_2_1
2-192
D1COLOR_MATRIX_COEF_2_2
2-193
D1COLOR_MATRIX_COEF_2_3
2-193
D1COLOR_MATRIX_COEF_2_4
2-193
D1COLOR_MATRIX_COEF_3_1
2-193
D1COLOR_MATRIX_COEF_3_2
2-194
D1COLOR_MATRIX_COEF_3_3
2-194
D1COLOR_MATRIX_COEF_3_4
2-194
D1COLOR_SPACE_CONVERT
2-194
D1CRTC_BLACK_COLOR
2-264
D1CRTC_BLANK_CONTROL
2-262
D1CRTC_BLANK_DATA_COLOR
2-263
D1CRTC_CONTROL
2-262
D1CRTC_COUNT_CONTROL
2-265
D1CRTC_COUNT_RESET
2-265
D1CRTC_DOUBLE_BUFFER_CONTROL
2-269
D1CRTC_FLOW_CONTROL
2-260
D1CRTC_FORCE_COUNT_NOW_CNTL
2-260
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-65
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
D1CRTC_H_BLANK_START_END
2-254
D1CRTC_H_SYNC_A
2-255
D1CRTC_H_SYNC_A_CNTL
2-255
D1CRTC_H_SYNC_B
2-255
D1CRTC_H_SYNC_B_CNTL
2-256
D1CRTC_H_TOTAL
2-254
D1CRTC_INTERLACE_CONTROL
2-263
D1CRTC_INTERLACE_STATUS
2-263
D1CRTC_INTERRUPT_CONTROL
2-268
D1CRTC_MANUAL_FORCE_VSYNC_NEXT_LINE
2-266
D1CRTC_MVP_BLACK_KEYER
2-204
D1CRTC_MVP_CONTROL1
2-201
D1CRTC_MVP_CONTROL2
2-202
D1CRTC_MVP_CONTROL3
2-205
D1CRTC_MVP_CRC_CNTL
2-204
D1CRTC_MVP_CRC_RESULT
2-205
D1CRTC_MVP_CRC2_CNTL
2-205
D1CRTC_MVP_CRC2_RESULT
2-205
D1CRTC_MVP_FIFO_CONTROL
2-202
D1CRTC_MVP_FIFO_STATUS
2-202
D1CRTC_MVP_INBAND_CNTL_CAP
2-203
D1CRTC_MVP_INBAND_CNTL_INSERT
2-203
D1CRTC_MVP_INBAND_CNTL_INSERT_TIMER
2-203
D1CRTC_MVP_RECEIVE_CNT_CNTL1
2-206
D1CRTC_MVP_RECEIVE_CNT_CNTL2
2-206
D1CRTC_MVP_SLAVE_STATUS
2-203
D1CRTC_MVP_STATUS
2-204
D1CRTC_OVERSCAN_COLOR
2-264
D1CRTC_PIXEL_DATA_READBACK
2-261
D1CRTC_SNAPSHOT_CONTROL
2-267
D1CRTC_SNAPSHOT_FRAME
2-267
D1CRTC_SNAPSHOT_POSITION
2-267
D1CRTC_SNAPSHOT_STATUS
2-267
D1CRTC_START_LINE_CONTROL
2-268
D1CRTC_STATUS
2-264
D1CRTC_STATUS_FRAME_COUNT
2-265
D1CRTC_STATUS_HV_COUNT
2-265
D1CRTC_STATUS_POSITION
2-264
D1CRTC_STATUS_VF_COUNT
2-265
D1CRTC_STEREO_CONTROL
2-266
D1CRTC_STEREO_FORCE_NEXT_EYE
2-261
D1CRTC_STEREO_STATUS
2-266
D1CRTC_TRIGA_CNTL
2-257
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-66
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
D1CRTC_TRIGA_MANUAL_TRIG
2-259
D1CRTC_TRIGB_CNTL
2-259
D1CRTC_TRIGB_MANUAL_TRIG
2-260
D1CRTC_UPDATE_LOCK
2-269
D1CRTC_V_BLANK_START_END
2-256
D1CRTC_V_SYNC_A
2-256
D1CRTC_V_SYNC_A_CNTL
2-257
D1CRTC_V_SYNC_B
2-257
D1CRTC_V_SYNC_B_CNTL
2-257
D1CRTC_V_TOTAL
2-256
D1CRTC_VERT_SYNC_CONTROL
2-266
D1CRTC_VGA_PARAMETER_CAPTURE_MODE
2-270
D1CUR_COLOR1
2-198
D1CUR_COLOR2
2-198
D1CUR_CONTROL
2-196
D1CUR_HOT_SPOT
2-198
D1CUR_POSITION
2-197
D1CUR_SIZE
2-197
D1CUR_SURFACE_ADDRESS
2-197
D1CUR_UPDATE
2-198
D1GRPH_ALPHA
2-188
D1GRPH_COLOR_MATRIX_TRANSFORMATION_CNTL
2-191
D1GRPH_CONTROL
2-169
D1GRPH_ENABLE
2-169
D1GRPH_FLIP_CONTROL
2-175
D1GRPH_KEY_RANGE_ALPHA
2-190
D1GRPH_KEY_RANGE_BLUE
2-189
D1GRPH_KEY_RANGE_GREEN
2-189
D1GRPH_KEY_RANGE_RED
2-189
D1GRPH_LUT_SEL
2-170
D1GRPH_PITCH
2-172
D1GRPH_PRIMARY_SURFACE_ADDRESS
2-171
D1GRPH_SECONDARY_SURFACE_ADDRESS
2-172
D1GRPH_SURFACE_ADDRESS_INUSE
2-175
D1GRPH_SURFACE_OFFSET_X
2-172
D1GRPH_SURFACE_OFFSET_Y
2-172
D1GRPH_SWAP_CNTL
2-171
D1GRPH_UPDATE
2-173
D1GRPH_X_END
2-173
D1GRPH_X_START
2-172
D1GRPH_Y_END
2-173
D1GRPH_Y_START
2-173
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-67
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
D1ICON_COLOR1
2-200
D1ICON_COLOR2
2-200
D1ICON_CONTROL
2-199
D1ICON_SIZE
2-200
D1ICON_START_POSITION
2-200
D1ICON_SURFACE_ADDRESS
2-199
D1ICON_UPDATE
2-201
D1MODE_MASTER_UPDATE_LOCK
2-268
D1MODE_MASTER_UPDATE_MODE
2-269
D1OVL_ALPHA
2-188
D1OVL_ALPHA_CONTROL
2-188
D1OVL_COLOR_MATRIX_TRANSFORMATION_CNTL
2-180
D1OVL_CONTROL1
2-175
D1OVL_CONTROL2
2-176
D1OVL_DFQ_CONTROL
2-179
D1OVL_DFQ_STATUS
2-180
D1OVL_ENABLE
2-175
D1OVL_END
2-178
D1OVL_KEY_ALPHA
2-191
D1OVL_KEY_CONTROL
2-187
D1OVL_KEY_RANGE_BLUE_CB
2-190
D1OVL_KEY_RANGE_GREEN_Y
2-190
D1OVL_KEY_RANGE_RED_CR
2-190
D1OVL_MATRIX_COEF_1_1
2-180
D1OVL_MATRIX_COEF_1_2
2-181
D1OVL_MATRIX_COEF_1_3
2-181
D1OVL_MATRIX_COEF_1_4
2-181
D1OVL_MATRIX_COEF_2_1
2-181
D1OVL_MATRIX_COEF_2_2
2-182
D1OVL_MATRIX_COEF_2_3
2-182
D1OVL_MATRIX_COEF_2_4
2-182
D1OVL_MATRIX_COEF_3_1
2-182
D1OVL_MATRIX_COEF_3_2
2-183
D1OVL_MATRIX_COEF_3_3
2-183
D1OVL_MATRIX_COEF_3_4
2-183
D1OVL_MATRIX_TRANSFORM_EN
2-180
D1OVL_PITCH
2-177
D1OVL_PWL_0TOF
2-183
D1OVL_PWL_100TO13F
2-185
D1OVL_PWL_10TO1F
2-184
D1OVL_PWL_140TO17F
2-185
D1OVL_PWL_180TO1BF
2-185
D1OVL_PWL_1C0TO1FF
2-185
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-68
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
D1OVL_PWL_200TO23F
2-186
D1OVL_PWL_20TO3F
2-184
D1OVL_PWL_240TO27F
2-186
D1OVL_PWL_280TO2BF
2-186
D1OVL_PWL_2C0TO2FF
2-186
D1OVL_PWL_300TO33F
2-186
D1OVL_PWL_340TO37F
2-187
D1OVL_PWL_380TO3BF
2-187
D1OVL_PWL_3C0TO3FF
2-187
D1OVL_PWL_40TO7F
2-184
D1OVL_PWL_80TOBF
2-184
D1OVL_PWL_C0TOFF
2-185
D1OVL_PWL_TRANSFORM_EN
2-183
D1OVL_RT_BAND_POSITION
2-195
D1OVL_RT_PROCEED_COND
2-195
D1OVL_RT_SKEWCOMMAND
2-195
D1OVL_RT_SKEWCONTROL
2-195
D1OVL_RT_STAT
2-196
D1OVL_START
2-178
D1OVL_SURFACE_ADDRESS
2-177
D1OVL_SURFACE_ADDRESS_INUSE
2-179
D1OVL_SURFACE_OFFSET_X
2-178
D1OVL_SURFACE_OFFSET_Y
2-178
D1OVL_SWAP_CNTL
2-177
D1OVL_UPDATE
2-178
D1VGA_CONTROL
2-162
D2_MVP_AFR_FLIP_FIFO_CNTL
2-240
D2_MVP_AFR_FLIP_MODE
2-240
D2_MVP_FLIP_LINE_NUM_INSERT
2-240
D2COLOR_MATRIX_COEF_1_1
2-230
D2COLOR_MATRIX_COEF_1_2
2-230
D2COLOR_MATRIX_COEF_1_3
2-230
D2COLOR_MATRIX_COEF_1_4
2-230
D2COLOR_MATRIX_COEF_2_1
2-231
D2COLOR_MATRIX_COEF_2_2
2-231
D2COLOR_MATRIX_COEF_2_3
2-231
D2COLOR_MATRIX_COEF_2_4
2-231
D2COLOR_MATRIX_COEF_3_1
2-232
D2COLOR_MATRIX_COEF_3_2
2-232
D2COLOR_MATRIX_COEF_3_3
2-232
D2COLOR_MATRIX_COEF_3_4
2-232
D2COLOR_SPACE_CONVERT
2-233
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-69
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
D2CRTC_BLACK_COLOR
2-280
D2CRTC_BLANK_CONTROL
2-278
D2CRTC_BLANK_DATA_COLOR
2-279
D2CRTC_CONTROL
2-278
D2CRTC_COUNT_CONTROL
2-281
D2CRTC_COUNT_RESET
2-281
D2CRTC_DOUBLE_BUFFER_CONTROL
2-285
D2CRTC_FLOW_CONTROL
2-276
D2CRTC_FORCE_COUNT_NOW_CNTL
2-276
D2CRTC_H_BLANK_START_END
2-270
D2CRTC_H_SYNC_A
2-270
D2CRTC_H_SYNC_A_CNTL
2-271
D2CRTC_H_SYNC_B
2-271
D2CRTC_H_SYNC_B_CNTL
2-271
D2CRTC_H_TOTAL
2-270
D2CRTC_INTERLACE_CONTROL
2-279
D2CRTC_INTERLACE_STATUS
2-279
D2CRTC_INTERRUPT_CONTROL
2-284
D2CRTC_MANUAL_FORCE_VSYNC_NEXT_LINE
2-282
D2CRTC_MVP_INBAND_CNTL_INSERT
2-204
D2CRTC_MVP_INBAND_CNTL_INSERT_TIMER
2-204
D2CRTC_MVP_STATUS
2-239
D2CRTC_OVERSCAN_COLOR
2-280
D2CRTC_PIXEL_DATA_READBACK
2-277
D2CRTC_SNAPSHOT_CONTROL
2-283
D2CRTC_SNAPSHOT_FRAME
2-283
D2CRTC_SNAPSHOT_POSITION
2-283
D2CRTC_SNAPSHOT_STATUS
2-283
D2CRTC_START_LINE_CONTROL
2-283
D2CRTC_STATUS
2-280
D2CRTC_STATUS_FRAME_COUNT
2-281
D2CRTC_STATUS_HV_COUNT
2-281
D2CRTC_STATUS_POSITION
2-280
D2CRTC_STATUS_VF_COUNT
2-281
D2CRTC_STEREO_CONTROL
2-282
D2CRTC_STEREO_FORCE_NEXT_EYE
2-277
D2CRTC_STEREO_STATUS
2-282
D2CRTC_TRIGA_CNTL
2-273
D2CRTC_TRIGA_MANUAL_TRIG
2-275
D2CRTC_TRIGB_CNTL
2-275
D2CRTC_TRIGB_MANUAL_TRIG
2-276
D2CRTC_UPDATE_LOCK
2-285
D2CRTC_V_BLANK_START_END
2-272
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-70
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
D2CRTC_V_SYNC_A
2-272
D2CRTC_V_SYNC_A_CNTL
2-273
D2CRTC_V_SYNC_B
2-273
D2CRTC_V_SYNC_B_CNTL
2-273
D2CRTC_V_TOTAL
2-272
D2CRTC_VBI_END
2-272
D2CRTC_VERT_SYNC_CONTROL
2-282
D2CRTC_VGA_PARAMETER_CAPTURE_MODE
2-285
D2CUR_COLOR1
2-236
D2CUR_COLOR2
2-236
D2CUR_CONTROL
2-235
D2CUR_HOT_SPOT
2-236
D2CUR_POSITION
2-236
D2CUR_SIZE
2-235
D2CUR_SURFACE_ADDRESS
2-235
D2CUR_UPDATE
2-237
D2GRPH_ALPHA
2-226
D2GRPH_COLOR_MATRIX_TRANSFORMATION_CNTL
2-229
D2GRPH_CONTROL
2-207
D2GRPH_ENABLE
2-207
D2GRPH_FLIP_CONTROL
2-213
D2GRPH_KEY_RANGE_ALPHA
2-228
D2GRPH_KEY_RANGE_BLUE
2-228
D2GRPH_KEY_RANGE_GREEN
2-227
D2GRPH_KEY_RANGE_RED
2-227
D2GRPH_LUT_SEL
2-209
D2GRPH_PITCH
2-210
D2GRPH_PRIMARY_SURFACE_ADDRESS
2-210
D2GRPH_SECONDARY_SURFACE_ADDRESS
2-210
D2GRPH_SURFACE_ADDRESS_INUSE
2-213
D2GRPH_SURFACE_OFFSET_X
2-211
D2GRPH_SURFACE_OFFSET_Y
2-211
D2GRPH_SWAP_CNTL
2-209
D2GRPH_UPDATE
2-212
D2GRPH_X_END
2-212
D2GRPH_X_START
2-211
D2GRPH_Y_END
2-212
D2GRPH_Y_START
2-211
D2ICON_COLOR1
2-238
D2ICON_COLOR2
2-238
D2ICON_CONTROL
2-237
D2ICON_SIZE
2-238
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-71
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
D2ICON_START_POSITION
2-238
D2ICON_SURFACE_ADDRESS
2-238
D2ICON_UPDATE
2-239
D2MODE_MASTER_UPDATE_LOCK
2-284
D2MODE_MASTER_UPDATE_MODE
2-284
D2OVL_ALPHA
2-226
D2OVL_ALPHA_CONTROL
2-227
D2OVL_COLOR_MATRIX_TRANSFORMATION_CNTL
2-221
D2OVL_CONTROL1
2-214
D2OVL_CONTROL2
2-215
D2OVL_DFQ_CONTROL
2-218
D2OVL_DFQ_STATUS
2-218
D2OVL_ENABLE
2-214
D2OVL_END
2-217
D2OVL_KEY_ALPHA
2-229
D2OVL_KEY_CONTROL
2-226
D2OVL_KEY_RANGE_BLUE_CB
2-229
D2OVL_KEY_RANGE_GREEN_Y
2-229
D2OVL_KEY_RANGE_RED_CR
2-228
D2OVL_MATRIX_COEF_1_1
2-219
D2OVL_MATRIX_COEF_1_2
2-219
D2OVL_MATRIX_COEF_1_3
2-219
D2OVL_MATRIX_COEF_1_4
2-219
D2OVL_MATRIX_COEF_2_1
2-219
D2OVL_MATRIX_COEF_2_2
2-220
D2OVL_MATRIX_COEF_2_3
2-220
D2OVL_MATRIX_COEF_2_4
2-220
D2OVL_MATRIX_COEF_3_1
2-220
D2OVL_MATRIX_COEF_3_2
2-221
D2OVL_MATRIX_COEF_3_3
2-221
D2OVL_MATRIX_COEF_3_4
2-221
D2OVL_MATRIX_TRANSFORM_EN
2-218
D2OVL_PITCH
2-216
D2OVL_PWL_0TOF
2-222
D2OVL_PWL_100TO13F
2-223
D2OVL_PWL_10TO1F
2-222
D2OVL_PWL_140TO17F
2-223
D2OVL_PWL_180TO1BF
2-224
D2OVL_PWL_1C0TO1FF
2-224
D2OVL_PWL_200TO23F
2-224
D2OVL_PWL_20TO3F
2-222
D2OVL_PWL_240TO27F
2-224
D2OVL_PWL_280TO2BF
2-224
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-72
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
D2OVL_PWL_2C0TO2FF
2-225
D2OVL_PWL_300TO33F
2-225
D2OVL_PWL_340TO37F
2-225
D2OVL_PWL_380TO3BF
2-225
D2OVL_PWL_3C0TO3FF
2-225
D2OVL_PWL_40TO7F
2-222
D2OVL_PWL_80TOBF
2-223
D2OVL_PWL_C0TOFF
2-223
D2OVL_PWL_TRANSFORM_EN
2-222
D2OVL_RT_BAND_POSITION
2-234
D2OVL_RT_PROCEED_COND
2-234
D2OVL_RT_SKEWCOMMAND
2-233
D2OVL_RT_SKEWCONTROL
2-233
D2OVL_RT_STAT
2-234
D2OVL_START
2-217
D2OVL_SURFACE_ADDRESS
2-216
D2OVL_SURFACE_ADDRESS_INUSE
2-218
D2OVL_SURFACE_OFFSET_X
2-216
D2OVL_SURFACE_OFFSET_Y
2-216
D2OVL_SWAP_CNTL
2-215
D2OVL_UPDATE
2-217
D2VGA_CONTROL
2-163
DAC_DATA
2-140
DAC_MASK
2-140
DAC_R_INDEX
2-140
DAC_W_INDEX
2-140
DACA_AUTODETECT_CONTROL
2-288
DACA_AUTODETECT_CONTROL2
2-288
DACA_AUTODETECT_CONTROL3
2-288
DACA_AUTODETECT_INT_CONTROL
2-289
DACA_AUTODETECT_STATUS
2-289
DACA_COMPARATOR_ENABLE
2-291
DACA_COMPARATOR_OUTPUT
2-291
DACA_CONTROL1
2-290
DACA_CONTROL2
2-290
DACA_CRC_CONTROL
2-286
DACA_CRC_EN
2-286
DACA_CRC_SIG_CONTROL
2-287
DACA_CRC_SIG_CONTROL_MASK
2-287
DACA_CRC_SIG_RGB
2-287
DACA_CRC_SIG_RGB_MASK
2-287
DACA_DFT_CONFIG
2-292
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-73
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
DACA_ENABLE
2-286
DACA_FORCE_DATA
2-290
DACA_FORCE_OUTPUT_CNTL
2-289
DACA_POWERDOWN
2-290
DACA_PWR_CNTL
2-292
DACA_SOURCE_SELECT
2-286
DACA_SYNC_SELECT
2-287
DACA_SYNC_TRISTATE_CONTROL
2-287
DACA_TEST_ENABLE
2-292
DACB_AUTODETECT_CONTROL
2-294
DACB_AUTODETECT_CONTROL2
2-295
DACB_AUTODETECT_CONTROL3
2-295
DACB_AUTODETECT_INT_CONTROL
2-296
DACB_AUTODETECT_STATUS
2-295
DACB_COMPARATOR_ENABLE
2-297
DACB_COMPARATOR_OUTPUT
2-298
DACB_CONTROL1
2-297
DACB_CONTROL2
2-297
DACB_CRC_CONTROL
2-293
DACB_CRC_EN
2-293
DACB_CRC_SIG_CONTROL
2-294
DACB_CRC_SIG_CONTROL_MASK
2-293
DACB_CRC_SIG_RGB
2-294
DACB_CRC_SIG_RGB_MASK
2-293
DACB_ENABLE
2-292
DACB_FORCE_DATA
2-296
DACB_FORCE_OUTPUT_CNTL
2-296
DACB_POWERDOWN
2-296
DACB_PWR_CNTL
2-298
DACB_SOURCE_SELECT
2-292
DACB_SYNC_SELECT
2-294
DACB_SYNC_TRISTATE_CONTROL
2-294
DACB_TEST_ENABLE
2-298
DC_CRTC_MASTER_EN
2-254
DC_CRTC_TV_CONTROL
2-254
DC_GENERICA
2-320
DC_GENERICB
2-320
DC_GPIO_DDC1_A
2-330
DC_GPIO_DDC1_EN
2-331
DC_GPIO_DDC1_MASK
2-330
DC_GPIO_DDC1_Y
2-331
DC_GPIO_DDC2_A
2-331
DC_GPIO_DDC2_EN
2-332
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-74
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
DC_GPIO_DDC2_MASK
2-331
DC_GPIO_DDC2_Y
2-332
DC_GPIO_DDC3_A
2-332
DC_GPIO_DDC3_EN
2-333
DC_GPIO_DDC3_MASK
2-332
DC_GPIO_DDC3_Y
2-333
DC_GPIO_DDC4_A
2-328
DC_GPIO_DDC4_EN
2-328
DC_GPIO_DDC4_MASK
2-328
DC_GPIO_DDC4_Y
2-328
DC_GPIO_DEBUG
2-328
DC_GPIO_DVODATA_A
2-329
DC_GPIO_DVODATA_EN
2-329
DC_GPIO_DVODATA_MASK
2-329
DC_GPIO_DVODATA_Y
2-330
DC_GPIO_GENERIC_A
2-327
DC_GPIO_GENERIC_EN
2-327
DC_GPIO_GENERIC_MASK
2-327
DC_GPIO_GENERIC_Y
2-327
DC_GPIO_HPD_A
2-335
DC_GPIO_HPD_EN
2-336
DC_GPIO_HPD_MASK
2-335
DC_GPIO_HPD_Y
2-336
DC_GPIO_PAD_STRENGTH_1
2-337
DC_GPIO_PAD_STRENGTH_2
2-338
DC_GPIO_PWRSEQ_A
2-337
DC_GPIO_PWRSEQ_EN
2-337
DC_GPIO_PWRSEQ_MASK
2-336
DC_GPIO_PWRSEQ_Y
2-337
DC_GPIO_SYNCA_A
2-333
DC_GPIO_SYNCA_EN
2-334
DC_GPIO_SYNCA_MASK
2-333
DC_GPIO_SYNCA_Y
2-334
DC_GPIO_SYNCB_A
2-334
DC_GPIO_SYNCB_EN
2-335
DC_GPIO_SYNCB_MASK
2-334
DC_GPIO_SYNCB_Y
2-335
DC_HOT_PLUG_DETECT_CLOCK_CONTROL
2-319
DC_HOT_PLUG_DETECT1_CONTROL
2-317
DC_HOT_PLUG_DETECT1_INT_CONTROL
2-318
DC_HOT_PLUG_DETECT1_INT_STATUS
2-317
DC_HOT_PLUG_DETECT2_CONTROL
2-318
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-75
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
DC_HOT_PLUG_DETECT2_INT_CONTROL
2-318
DC_HOT_PLUG_DETECT2_INT_STATUS
2-318
DC_HOT_PLUG_DETECT3_CONTROL
2-319
DC_HOT_PLUG_DETECT3_INT_CONTROL
2-319
DC_HOT_PLUG_DETECT3_INT_STATUS
2-319
DC_I2C_ARBITRATION
2-98
DC_I2C_CONTROL
2-97
DC_I2C_DATA
2-105
DC_I2C_DDC1_HW_STATUS
2-99
DC_I2C_DDC1_SETUP
2-100
DC_I2C_DDC1_SPEED
2-100
DC_I2C_DDC2_HW_STATUS
2-100
DC_I2C_DDC2_SETUP
2-101
DC_I2C_DDC2_SPEED
2-101
DC_I2C_DDC3_HW_STATUS
2-100
DC_I2C_DDC3_SETUP
2-102
DC_I2C_DDC3_SPEED
2-102
DC_I2C_DDC4_HW_STATUS
2-108
DC_I2C_DDC4_SETUP
2-109
DC_I2C_DDC4_SPEED
2-109
DC_I2C_INTERRUPT_CONTROL
2-98
DC_I2C_SW_STATUS
2-99
DC_I2C_TRANSACTION0
2-103
DC_I2C_TRANSACTION1
2-103
DC_I2C_TRANSACTION2
2-104
DC_I2C_TRANSACTION3
2-104
DC_LUT_30_COLOR
2-242
DC_LUT_AUTOFILL
2-242
DC_LUT_PWL_DATA
2-241
DC_LUT_READ_PIPE_SELECT
2-242
DC_LUT_RW_INDEX
2-241
DC_LUT_RW_MODE
2-241
DC_LUT_RW_SELECT
2-240
DC_LUT_SEQ_COLOR
2-241
DC_LUT_WRITE_EN_MASK
2-242
DC_LUTA_BLACK_OFFSET_BLUE
2-245
DC_LUTA_BLACK_OFFSET_GREEN
2-245
DC_LUTA_BLACK_OFFSET_RED
2-245
DC_LUTA_CONTROL
2-243
DC_LUTA_WHITE_OFFSET_BLUE
2-245
DC_LUTA_WHITE_OFFSET_GREEN
2-245
DC_LUTA_WHITE_OFFSET_RED
2-245
DC_LUTB_BLACK_OFFSET_BLUE
2-248
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-76
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
DC_LUTB_BLACK_OFFSET_GREEN
2-248
DC_LUTB_BLACK_OFFSET_RED
2-248
DC_LUTB_CONTROL
2-246
DC_LUTB_WHITE_OFFSET_BLUE
2-248
DC_LUTB_WHITE_OFFSET_GREEN
2-248
DC_LUTB_WHITE_OFFSET_RED
2-248
DC_MVP_LB_CONTROL
2-253
DC_PAD_EXTERN_SIG
2-320
DC_REF_CLK_CNTL
2-321
DCP_CRC_CONTROL
2-249
DCP_CRC_MASK
2-249
DCP_CRC_P0_CURRENT
2-249
DCP_CRC_P0_LAST
2-249
DCP_CRC_P1_CURRENT
2-249
DCP_CRC_P1_LAST
2-250
DCP_LB_DATA_GAP_BETWEEN_CHUNK
2-253
DCP_MULTI_CHIP_CNTL
2-251
DCP_TILING_CONFIG
2-250
DEVICE_CAP
2-79
DEVICE_CAP2
2-83
DEVICE_CNTL
2-80
DEVICE_CNTL2
2-83
DEVICE_ID
2-73
DEVICE_STATUS
2-81
DEVICE_STATUS2
2-83
DISP_INTERRUPT_STATUS
2-321
DISP_INTERRUPT_STATUS_CONTINUE
2-323
DISP_TIMER_CONTROL
2-325
DLL_CNTL
2-92
DMA_VIP0_TABLE_ADDR
2-129
DMA_VIP1_TABLE_ADDR
2-129
DMA_VIP2_TABLE_ADDR
2-129
DMA_VIP3_TABLE_ADDR
2-129
DMA_VIPH_ABORT
2-130
DMA_VIPH_CHUNK_0
2-128
DMA_VIPH_CHUNK_1_VAL
2-128
DMA_VIPH_MISC_CNTL
2-127
DMA_VIPH_STATUS
2-127
DMA_VIPH0_ACTIVE
2-129
DMA_VIPH0_COMMAND
2-125
DMA_VIPH1_ACTIVE
2-129
DMA_VIPH1_COMMAND
2-125
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-77
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
DMA_VIPH2_ACTIVE
2-129
DMA_VIPH2_COMMAND
2-126
DMA_VIPH3_ACTIVE
2-130
DMA_VIPH3_COMMAND
2-126
DMIF_CONTROL
2-251
DMIF_STATUS
2-252
DOUT_POWER_MANAGEMENT_CNTL
2-324
DVOA_BIT_DEPTH_CONTROL
2-313
DVOA_CONTROL
2-314
DVOA_CRC_CONTROL
2-315
DVOA_CRC_EN
2-314
DVOA_CRC_SIG_MASK1
2-315
DVOA_CRC_SIG_MASK2
2-315
DVOA_CRC_SIG_RESULT1
2-315
DVOA_CRC_SIG_RESULT2
2-315
DVOA_CRC2_SIG_MASK
2-316
DVOA_CRC2_SIG_RESULT
2-316
DVOA_ENABLE
2-312
DVOA_FORCE_DATA
2-317
DVOA_FORCE_OUTPUT_CNTL
2-317
DVOA_OUTPUT
2-314
DVOA_SOURCE_SELECT
2-312
DVOA_STRENGTH_CONTROL
2-316
ERROR_STATUS
2-93
EXTERN_TRIG_CNTL
2-136
GENENB
2-138
GENERAL_PWRMGT
2-90
GENERIC_I2C_CONTROL
2-105
GENERIC_I2C_DATA
2-107
GENERIC_I2C_INTERRUPT_CONTROL
2-105
GENERIC_I2C_PIN_DEBUG
2-108
GENERIC_I2C_PIN_SELECTION
2-108
GENERIC_I2C_SETUP
2-106
GENERIC_I2C_SPEED
2-106
GENERIC_I2C_STATUS
2-106
GENERIC_I2C_TRANSACTION
2-107
GENFC_RD
2-139
GENFC_WT
2-139
GENMO_RD
2-138
GENMO_WT
2-138
GENS0
2-139
GENS1
2-139
GPIOPAD_A
2-131
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-78
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
GPIOPAD_EN
2-131
GPIOPAD_EXTERN_TRIG_CNTL
2-132
GPIOPAD_MASK
2-131
GPIOPAD_STRENGTH
2-131
GPIOPAD_Y
2-131
GRA00
2-150
GRA01
2-151
GRA02
2-151
GRA03
2-151
GRA04
2-151
GRA05
2-151
GRA06
2-152
GRA07
2-152
GRA08
2-152
GRPH8_DATA
2-150
GRPH8_IDX
2-150
HEADER
2-76
I2C_CNTL_0
2-96
I2C_CNTL_1
2-96
I2C_DATA
2-97
INTERRUPT_LINE
2-77
INTERRUPT_PIN
2-77
LATENCY
2-76
LINK_CAP
2-81
LINK_CAP2
2-83
LINK_CNTL
2-82
LINK_CNTL2
2-84
LINK_STATUS
2-82
LINK_STATUS2
2-84
MAX_LATENCY
2-77
MC_IMP_CNTL
2-10
MC_IMP_DEBUG
2-10
MC_IMP_STATUS
2-10
MC_IO_A_PAD_CNTL_D0_I0
2-33
MC_IO_A_PAD_CNTL_D0_I1
2-34
MC_IO_A_PAD_CNTL_D1_I0
2-45
MC_IO_A_PAD_CNTL_D1_I1
2-45
MC_IO_CK_PAD_CNTL_D0_I0
2-31
MC_IO_CK_PAD_CNTL_D0_I1
2-31
MC_IO_CK_PAD_CNTL_D1_I0
2-43
MC_IO_CK_PAD_CNTL_D1_I1
2-43
MC_IO_CMD_PAD_CNTL_D0_I0
2-31
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-79
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
MC_IO_CMD_PAD_CNTL_D0_I1
2-32
MC_IO_CMD_PAD_CNTL_D1_I0
2-43
MC_IO_CMD_PAD_CNTL_D1_I1
2-43
MC_IO_DQ_PAD_CNTL_D0_I0
2-32
MC_IO_DQ_PAD_CNTL_D0_I1
2-32
MC_IO_DQ_PAD_CNTL_D1_I0
2-44
MC_IO_DQ_PAD_CNTL_D1_I1
2-44
MC_IO_PAD_CNTL
2-11
MC_IO_PAD_CNTL_D0
2-25
MC_IO_PAD_CNTL_D0_I0
2-28
MC_IO_PAD_CNTL_D0_I1
2-28
MC_IO_PAD_CNTL_D1
2-25
MC_IO_PAD_CNTL_D1_I0
2-39
MC_IO_PAD_CNTL_D1_I1
2-40
MC_IO_QS_PAD_CNTL_D0_I0
2-33
MC_IO_QS_PAD_CNTL_D0_I1
2-33
MC_IO_QS_PAD_CNTL_D1_I0
2-44
MC_IO_QS_PAD_CNTL_D1_I1
2-45
MC_IO_RD_DQ_CNTL_D0_I0
2-29
MC_IO_RD_DQ_CNTL_D0_I1
2-29
MC_IO_RD_DQ_CNTL_D1_I0
2-41
MC_IO_RD_DQ_CNTL_D1_I1
2-41
MC_IO_RD_QS_CNTL_D0_I0
2-30
MC_IO_RD_QS_CNTL_D0_I1
2-30
MC_IO_RD_QS_CNTL_D1_I0
2-41
MC_IO_RD_QS_CNTL_D1_I1
2-42
MC_IO_RD_QS2_CNTL_D0_I0
2-30
MC_IO_RD_QS2_CNTL_D0_I1
2-30
MC_IO_RD_QS2_CNTL_D1_I0
2-42
MC_IO_RD_QS2_CNTL_D1_I1
2-42
MC_IO_RD_STR_NCNTL_B0_D0
2-35
MC_IO_RD_STR_NCNTL_B0_D1
2-46
MC_IO_RD_STR_NCNTL_B1_D0
2-35
MC_IO_RD_STR_NCNTL_B1_D1
2-46
MC_IO_RD_STR_NCNTL_B2_D0
2-35
MC_IO_RD_STR_NCNTL_B2_D1
2-47
MC_IO_RD_STR_NCNTL_B3_D0
2-35
MC_IO_RD_STR_NCNTL_B3_D1
2-47
MC_IO_RD_STR_NCNTL_B4_D0
2-36
MC_IO_RD_STR_NCNTL_B4_D1
2-47
MC_IO_RD_STR_NCNTL_B5_D0
2-36
MC_IO_RD_STR_NCNTL_B5_D1
2-47
MC_IO_RD_STR_NCNTL_B6_D0
2-36
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-80
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
MC_IO_RD_STR_NCNTL_B6_D1
2-48
MC_IO_RD_STR_NCNTL_B7_D0
2-37
MC_IO_RD_STR_NCNTL_B7_D1
2-48
MC_IO_WR_CNTL_D0_I0
2-30
MC_IO_WR_CNTL_D0_I1
2-31
MC_IO_WR_CNTL_D1_I0
2-42
MC_IO_WR_CNTL_D1_I1
2-42
MC_IO_WR_DQ_CNTL_D0_I0
2-34
MC_IO_WR_DQ_CNTL_D0_I1
2-34
MC_IO_WR_DQ_CNTL_D1_I0
2-46
MC_IO_WR_DQ_CNTL_D1_I1
2-46
MC_IO_WR_QS_CNTL_D0_I0
2-34
MC_IO_WR_QS_CNTL_D0_I1
2-34
MC_IO_WR_QS_CNTL_D1_I0
2-46
MC_IO_WR_QS_CNTL_D1_I1
2-46
MC_NPL_STATUS
2-50
MC_PMG_CFG
2-9
MC_PMG_CMD
2-8
MC_SEQ_A_PAD_CNTL_D0_I0
2-27
MC_SEQ_A_PAD_CNTL_D0_I1
2-27
MC_SEQ_A_PAD_CNTL_D1_I0
2-39
MC_SEQ_A_PAD_CNTL_D1_I1
2-39
MC_SEQ_CAS_TIMING_B
2-5
MC_SEQ_CAS_TIMING_C
2-7
MC_SEQ_CAS_TIMING_P
2-4
MC_SEQ_CAS_TIMING_S
2-6
MC_SEQ_CK_PAD_CNTL_D0_I0
2-25
MC_SEQ_CK_PAD_CNTL_D0_I1
2-25
MC_SEQ_CK_PAD_CNTL_D1_I0
2-37
MC_SEQ_CK_PAD_CNTL_D1_I1
2-37
MC_SEQ_CMD
2-8
MC_SEQ_CMD_PAD_CNTL_D0_I0
2-26
MC_SEQ_CMD_PAD_CNTL_D0_I1
2-26
MC_SEQ_CMD_PAD_CNTL_D1_I0
2-37
MC_SEQ_CMD_PAD_CNTL_D1_I1
2-38
MC_SEQ_CNTL
2-2
MC_SEQ_DQ_PAD_CNTL_D0_I0
2-26
MC_SEQ_DQ_PAD_CNTL_D0_I1
2-26
MC_SEQ_DQ_PAD_CNTL_D1_I0
2-38
MC_SEQ_DQ_PAD_CNTL_D1_I1
2-38
MC_SEQ_DRAM
2-2
MC_SEQ_GENERAL_CONFIG
2-48
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-81
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
MC_SEQ_IO_CTL_D0
2-23
MC_SEQ_IO_CTL_D1
2-23
MC_SEQ_IO_CTL_UNUSED
2-24
MC_SEQ_MISC_TIMING_B
2-5
MC_SEQ_MISC_TIMING_C
2-7
MC_SEQ_MISC_TIMING_P
2-4
MC_SEQ_MISC_TIMING_S
2-6
MC_SEQ_MISC_TIMING2_B
2-5
MC_SEQ_MISC_TIMING2_C
2-8
MC_SEQ_MISC_TIMING2_P
2-4
MC_SEQ_MISC_TIMING2_S
2-7
MC_SEQ_NPL_CTL_D0
2-24
MC_SEQ_NPL_CTL_D1
2-24
MC_SEQ_QS_PAD_CNTL_D0_I0
2-27
MC_SEQ_QS_PAD_CNTL_D0_I1
2-27
MC_SEQ_QS_PAD_CNTL_D1_I0
2-38
MC_SEQ_QS_PAD_CNTL_D1_I1
2-39
MC_SEQ_RAS_TIMING_B
2-5
MC_SEQ_RAS_TIMING_C
2-7
MC_SEQ_RAS_TIMING_P
2-4
MC_SEQ_RAS_TIMING_S
2-6
MC_SEQ_RD_CTL_D0_B
2-14
MC_SEQ_RD_CTL_D0_C
2-20
MC_SEQ_RD_CTL_D0_P
2-11
MC_SEQ_RD_CTL_D0_S
2-17
MC_SEQ_RD_CTL_D1_B
2-15
MC_SEQ_RD_CTL_D1_C
2-21
MC_SEQ_RD_CTL_D1_P
2-12
MC_SEQ_RD_CTL_D1_S
2-18
MC_SEQ_RS_CNTL
2-48
MC_SEQ_STATUS_M
2-49
MC_SEQ_STATUS_S
2-49
MC_SEQ_WR_CTL_D0_B
2-17
MC_SEQ_WR_CTL_D0_C
2-22
MC_SEQ_WR_CTL_D0_P
2-14
MC_SEQ_WR_CTL_D0_S
2-19
MC_SEQ_WR_CTL_D1_B
2-17
MC_SEQ_WR_CTL_D1_C
2-23
MC_SEQ_WR_CTL_D1_P
2-14
MC_SEQ_WR_CTL_D1_S
2-20
MCIF_CONTROL
2-252
MCLK_PWRMGT_CNTL
2-91
MIN_GRANT
2-77
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-82
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
MM_DATA
2-51
MM_INDEX
2-51
MPLL_CNTL_MODE
2-90
MPLL_FUNC_CNTL
2-89
MPLL_TIME
2-93
MSI_CAP_LIST
2-84
MSI_MSG_ADDR_HI
2-85
MSI_MSG_ADDR_LO
2-85
MSI_MSG_CNTL
2-84
MSI_MSG_DATA
2-85
MSI_MSG_DATA_64
2-85
PCIE_ADV_ERR_CAP_CNTL
2-87
PCIE_ADV_ERR_RPT_ENH_CAP_LIST
2-85
PCIE_CAP
2-79
PCIE_CAP_LIST
2-78
PCIE_CI_CNTL
2-54
PCIE_CORR_ERR_MASK
2-87
PCIE_CORR_ERR_STATUS
2-87
PCIE_DATA
2-54
PCIE_ERR_CNTL
2-66
PCIE_HDR_LOG0
2-87
PCIE_HDR_LOG1
2-88
PCIE_HDR_LOG2
2-88
PCIE_HDR_LOG3
2-88
PCIE_INDEX
2-54
PCIE_LC_CNTL
2-69
PCIE_LC_CNTL2
2-70
PCIE_LC_LINK_WIDTH_CNTL
2-71
PCIE_LC_N_FTS_CNTL
2-71
PCIE_LC_STATE0
2-72
PCIE_LC_STATE1
2-72
PCIE_LC_STATE10
2-56
PCIE_LC_STATE11
2-56
PCIE_LC_STATE2
2-72
PCIE_LC_STATE3
2-72
PCIE_LC_STATE4
2-72
PCIE_LC_STATE5
2-73
PCIE_LC_STATE6
2-55
PCIE_LC_STATE7
2-55
PCIE_LC_STATE8
2-55
PCIE_LC_STATE9
2-55
PCIE_P_BUF_STATUS
2-57
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-83
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
PCIE_P_CNTL
2-56
PCIE_P_DECODE_ERR_CNT_0
2-63
PCIE_P_DECODE_ERR_CNT_1
2-63
PCIE_P_DECODE_ERR_CNT_10
2-64
PCIE_P_DECODE_ERR_CNT_11
2-64
PCIE_P_DECODE_ERR_CNT_12
2-65
PCIE_P_DECODE_ERR_CNT_13
2-65
PCIE_P_DECODE_ERR_CNT_14
2-65
PCIE_P_DECODE_ERR_CNT_15
2-65
PCIE_P_DECODE_ERR_CNT_2
2-63
PCIE_P_DECODE_ERR_CNT_3
2-63
PCIE_P_DECODE_ERR_CNT_4
2-63
PCIE_P_DECODE_ERR_CNT_5
2-63
PCIE_P_DECODE_ERR_CNT_6
2-64
PCIE_P_DECODE_ERR_CNT_7
2-64
PCIE_P_DECODE_ERR_CNT_8
2-64
PCIE_P_DECODE_ERR_CNT_9
2-64
PCIE_P_DECODE_ERR_CNTL
2-62
PCIE_P_DECODER_STATUS
2-58
PCIE_P_IMP_CNTL_STRENGTH
2-61
PCIE_P_IMP_CNTL_UPDATE
2-62
PCIE_P_MISC_DEBUG_STATUS
2-60
PCIE_P_PAD_MISC_CNTL
2-62
PCIE_P_STR_CNTL_UPDATE
2-62
PCIE_P_SYMSYNC_CTL
2-61
PCIE_RX_CNTL
2-67
PCIE_RX_CREDITS_ALLOCATED_CPL
2-68
PCIE_RX_CREDITS_ALLOCATED_NP
2-67
PCIE_RX_CREDITS_ALLOCATED_P
2-67
PCIE_RX_CREDITS_RECEIVED_CPL
2-68
PCIE_RX_CREDITS_RECEIVED_NP
2-68
PCIE_RX_CREDITS_RECEIVED_P
2-68
PCIE_RX_NUM_NACK
2-54
PCIE_RX_NUM_NACK_GENERATED
2-54
PCIE_TX_CNTL
2-65
PCIE_TX_REPLAY
2-66
PCIE_TX_SEQ
2-66
PCIE_UNCORR_ERR_MASK
2-86
PCIE_UNCORR_ERR_SEVERITY
2-86
PCIE_UNCORR_ERR_STATUS
2-86
PLL_BYPASSCLK_SEL
2-89
PLL_TEST_CNTL
2-94
PMI_CAP
2-78
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-84
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
PMI_CAP_LIST
2-78
PMI_STATUS_CNTL
2-78
PROG_INTERFACE
2-75
REVISION_ID
2-75
ROM_CNTL
2-136
ROM_DATA
2-137
ROM_INDEX
2-137
ROM_START
2-137
ROM_STATUS
2-136
SCLK_PWRMGT_CNTL
2-91
SEQ00
2-141
SEQ01
2-141
SEQ02
2-142
SEQ03
2-142
SEQ04
2-142
SEQ8_DATA
2-141
SEQ8_IDX
2-141
SPLL_CNTL_MODE
2-89
SPLL_TIME
2-93
STATUS
2-74
SUB_CLASS
2-75
TMDSA_2ND_CRC_RESULT
2-304
TMDSA_BIT_DEPTH_CONTROL
2-301
TMDSA_CNTL
2-299
TMDSA_COLOR_FORMAT
2-300
TMDSA_CONTROL_CHAR
2-301
TMDSA_CONTROL0_FEEDBACK
2-302
TMDSA_CRC_CNTL
2-302
TMDSA_CRC_SIG_MASK
2-303
TMDSA_CRC_SIG_RGB
2-303
TMDSA_CTL_BITS
2-305
TMDSA_CTL0_1_GEN_CNTL
2-306
TMDSA_CTL2_3_GEN_CNTL
2-307
TMDSA_DATA_SYNCHRONIZATION
2-306
TMDSA_DCBALANCER_CONTROL
2-305
TMDSA_DEBUG
2-305
TMDSA_DITHER_RAND_SEED
2-311
TMDSA_FORCE_DATA
2-300
TMDSA_FORCE_OUTPUT_CNTL
2-300
TMDSA_LOAD_DETECT
2-309
TMDSA_PLL_ADJUST
2-309
TMDSA_RANDOM_PATTERN_SEED
2-304
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-85
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
TMDSA_RED_BLUE_SWITCH
2-305
TMDSA_REG_TEST_OUTPUTA
2-311
TMDSA_REG_TEST_OUTPUTB
2-312
TMDSA_SOURCE_SELECT
2-299
TMDSA_STEREOSYNC_CTL_SEL
2-302
TMDSA_SYNC_CHAR_PATTERN_0_1
2-302
TMDSA_SYNC_CHAR_PATTERN_2_3
2-302
TMDSA_SYNC_CHAR_PATTERN_SEL
2-302
TMDSA_TEST_PATTERN
2-304
TMDSA_TRANSMITTER_ADJUST
2-312
TMDSA_TRANSMITTER_CONTROL
2-309
TMDSA_TRANSMITTER_DEBUG
2-311
TMDSA_TRANSMITTER_ENABLE
2-308
VENDOR_ID
2-73
VGA_CACHE_CONTROL
2-162
VGA_DEBUG_READBACK_DATA
2-168
VGA_DEBUG_READBACK_INDEX
2-167
VGA_DISPBUF1_SURFACE_ADDR
2-161
VGA_DISPBUF2_SURFACE_ADDR
2-161
VGA_HDP_CONTROL
2-161
VGA_HW_DEBUG
2-164
VGA_INTERRUPT_CONTROL
2-164
VGA_INTERRUPT_STATUS
2-165
VGA_MAIN_CONTROL
2-165
VGA_MEM_READ_PAGE_ADDR
2-168
VGA_MEM_WRITE_PAGE_ADDR
2-168
VGA_MEMORY_BASE_ADDRESS
2-161
VGA_MODE_CONTROL
2-160
VGA_RENDER_CONTROL
2-158
VGA_SEQUENCER_RESET_CONTROL
2-159
VGA_STATUS
2-164
VGA_STATUS_CLEAR
2-164
VGA_SURFACE_PITCH_SELECT
2-160
VGA_TEST_CONTROL
2-167
VID_BUFFER_CONTROL
2-115
VIPH_CH0_ABCNT
2-112
VIPH_CH0_ADDR
2-110
VIPH_CH0_DATA
2-110
VIPH_CH0_SBCNT
2-111
VIPH_CH1_ABCNT
2-112
VIPH_CH1_ADDR
2-111
VIPH_CH1_DATA
2-110
VIPH_CH1_SBCNT
2-111
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-86
© 2007 Advanced Micro Devices, Inc.
Proprietary
Table A-18 All Registers Sorted by Name
(Continued)
Register Name
Page
VIPH_CH2_ABCNT
2-112
VIPH_CH2_ADDR
2-111
VIPH_CH2_DATA
2-110
VIPH_CH2_SBCNT
2-112
VIPH_CH3_ABCNT
2-112
VIPH_CH3_ADDR
2-111
VIPH_CH3_DATA
2-110
VIPH_CH3_SBCNT
2-112
VIPH_CONTROL
2-113
VIPH_DMA_CHUNK
2-114
VIPH_DV_INT
2-114
VIPH_DV_LAT
2-114
VIPH_REG_ADDR
2-109
VIPH_REG_DATA
2-110
VIPH_TIMEOUT_STAT
2-114
VIPPAD_A
2-133
VIPPAD_EN
2-134
VIPPAD_MASK
2-132
VIPPAD_STRENGTH
2-135
VIPPAD_Y
2-135
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-87
42589 RV630 Register Reference Guide (OEM) Rev 1.01
A-88
© 2007 Advanced Micro Devices, Inc.
Proprietary
Appendix B
Revision History
Rev 1.01 (May 07)
•
Updated PCIE_RX_CNTL.RX_RCB_CPL_TIMEOUT[18:16].
Rev 1.00 (March 07)
•
Preliminary release.
© 2007 Advanced Micro Devices, Inc.
Proprietary
42589 RV630 Register Reference Guide (OEM) Rev 1.01
B-1
This page intentionally left blank.
42589 RV630 Register Reference Guide (OEM) Rev 1.01
B-2
© 2007 Advanced Micro Devices, Inc.
Proprietary