XXXX V D E SCREW MOUNTING INTRODUCTIONS SPECIFICATIONS 1. Designed to meet globally accepted IEC publication 320 Class 1, that allows users to comply with industry standard in power entry requirement. 2. Connector for cold condition, with pin temperature 70oC max. 3. Nickel-plated brass pins and soldering terminals. 4. Screw-on mount from front or rear (with screw type-M3). 5. Fuse holder designed for one fuse and one spare fuse (both 5x20mm fuses). Safety interlock prevents fuse removal with line plug inserted. 6. Adapts to 110V or 240V input voltage simply by reversing the voltage selector. 7. All part numbers are UL recognized, CSA certified except for SK-015A which is UL listed. SK-1000 are DEMKO, approved. SK-1017 is UL, CSA approved. SK-1008 UL, CSA, VDE, CCC approved. SK-1007A UL, CSA approved. SK-1007A is patented for new construction (R.O.C. patent no. 54606). SK-015A is UL, CSA, VDE, Somko, CCC. Approved 1. Rated voltage: 250VAC 2. Minimum insulation resistance at 500VDC: 10M OHM 3. Dielectric strength (one minute): 2000VAC between pins 4. Flammability class: UL 94V-0 ELECTRICAL SCHEMATIC F L L L I N E L O A D N N G G FIG. A CUSTOMER TRANSFORMER PRIMARIES L L L I N E F 120V L O A D N N 120V TYPE & RATED CURRENT SK-015A SK-1000 SK-1017 SK-1007A UL/CSA 15A 15A 15A 10A VDE 10A 10A 10A 10A DELTA PART NUMBER RATED CURRENT (AT 250VAC) CONNECTOR TYPE MALE REMARKS: 1. SK-015A RATING SEV/SEMKO/NEMKO/DEMKO_10A/250VAC SK-1017/SK-1000 SEMKO/NEMKO/SETI/DEMKO_10A/250VAC 2. SK-1017 FUSE HOLDER SINGLE FUSE HOLDER ON SK-1017 IS A RETAINED DESIGN FEMALE FUSE HOLDER - S *4 S *2 VOLTAGE SELECTOR - - - FRONT *3 ELECTRICAL SCHEMATIC - FIG. A FIG. A FIG. B S *4 3. VOLTAGE SELECTOR CARD RATING UL/CSA/VDE_10A/250VAC 4. "S" FOR SINGLE FUSE HOLDER UL CSA VDE SEMKO CCC MECHANICAL CONSTRUCTION 1.97MAX. 50.0MAX. 1.575 40.0 +0.008 1.080 +0.2 27.50 THD. M3 0.14 3.5 R0.157MAX.(4X) R4.0MAX.(4X) 0.88 22.3 +0.008 0.79-0 +0.2 20.0-0 1.19 30.3 1.575 0 .004 40.0 0 .1 MOUNTING CUTOUT (FRONT MOUNTING) +0 0.67-0.04 +0 17.0-1 +0.02 0.59-0 +0.5 15.0-0 0.12 3.0 +0.04 0.47-0.02 +1.0 12.0-0.5 0.12 3.0 R0.24(4X) R6.0(4X) 1.12MAX. 28.5MAX. POWER ENTRY MODULES FIG. B 0.13(2X) 3.3(2X) 1.08MAX. 27.5MAX. SK-015A 0.79MAX. 20.0MAX. UNIT: 9-1 INCH mm MECHANICAL CONSTRUCTION 1.417 36.0 +0.02 0.940 +0.5 24.00 R0.08(4X) 31.0 1.22 1.34MAX. 34.0MAX. R2.0(4X) R0.08(4X) R2.0(4X) 1.10 28.0 1.08 27.5 1.77MAX. 45.0MAX. 0.13(2X) 3.3(2X) 1.417 0.004 36.0 0.1 1.08MAX. 27.5MAX. +0.008 1.0830 +0.2 27.50 TDH.M3 1.24MAX. 31.5MAX. 0.138(2X) R0.1MAX.(4X) R2.5MAX.(4X) +0.008 1.24-0 +0.2 31.5-0 3.5(2X) SK-1000 1.122MAX. 1.77MAX. 45.0MAX. R0.08(4X) 28.5MAX. 1.417 36.0 0.1 2.5 0.1 2.5 1.38MAX. 35.0MAX. 1.18 30.0 0.206 7.0 R2.0(4X) POWER ENTRY MODULES MOUNTING CUTOUT (FRONT MOUNTING) 1.417 0.004 36.0 0.1 1.063 27.0 +0.008 1.0830 +0.2 27.50 TDH.M3 0.138(2X) R0.118MAX.(4X) R3.0MAX.(4X) +0.008 1.2-0 +0.2 30.5-0 3.5(2X) 0.13(2X) 3.3(2X) 0.276(2X) 7.0(2X) MOUNTING CUTOUT (FRONT MOUNTING) SK-1017 1.10MAX. 1.77MAX. R0.08(4X) 28.0MAX. 28.0 0.12 2.0 3.0 1.16MAX. 1.417 29.5MAX. 36.0 0.13(2X) 3.3(2X) SK-1007A 0.08 32.0 1.26 36.0MAX. 1.42MAX. R2.0(4X) 45.0MAX. 1.10 0.236(3X) 6.0(3X) UNIT: 9-2 INCH mm