XXXX SNAP-IN MOUNTING INTRODUCTIONS V D E SPECIFICATIONS 1. Designed to meet globally accepted IEC publication 320 Class 1, that allows users to comply with industry standard in power entry requirement. 2. Connector for cold condition, with pin temperature 70oC max. 3. Nickel-plated brass pins and soldering terminals. 4. SK-1015-STD solder lug mount panel thickness: 1.0mm / 0.04 inch. SK-1015 (F1.0) fast-on lug mount panel thickness: 1.0mm / 0.04 inch. SK-1015 (F1.3) fast-on lug mount panel thickness: 1.3mm / 0.05 inch. SK-1015 (F1.5) fast-on lug mount panel thickness: 1.5mm / 0.06 inch. SK-1016 panel thickness: 1.0mm / 0.04 inch. 5. Adapts to 115V or 250V input voltage with voltage selector switch. SK-1015 is UL recognized, CSA certified, VDE approved, SEMKO & CCC approved. SK-1016: UL recognized, CSA certified, VDE approved, CCC approved. 1. Rated voltage: 250VAC 2. Minimum insulation resistance at 500VDC: 10M OHM 3. Dielectric strength (one minute): 2000VAC between pins 4. Flammability class: UL 94V-0 TYPE & RATED CURRENT DELTA PART NUMBER CONNECTOR TYPE UL/CSA VDE MALE FEMALE SK-1015 SK-1016 15A 10A 15A 10A REMARKS: 1. SK-1015 RATING SEMKO/NEMKO/DEMKO/SETI_10A/250VAC 2. VOLTAGE SELECTOR SWITCH RATING UL/CSA/VDE/SEMKO/NEMKO/DEMKO/SETI_ 10A/250VAC UL CSA VDE SEMKO CCC MECHANICAL CONSTRUCTION 1.10MAX. 28.0MAX. 1.22 31.0 0.12 3.0 0.945 24.0 0.276 7.0 R0.04(4X) R1.0(4X) SOLDER LUG +0.004 1.0830 +0.1 27.50 +0.004 0.787-0 +0.1 20.0-0 R0.118MAX.(4X) R3.0MAX.(4X) 0.250X0.032 6.35X0.8 0.12 3.0 1.16MAX. 29.5MAX. FAST-ON LUG MOUNTING CUTOUT (FRONT MOUNTING) SK-1015 1.358MAX. R0.04(4X) 1.374 34.9 0.12 3.0 34.5MAX. 27.7 R1.0(4X) 1.280 0.004 32.5 0.1 25.0 0.1 R0.236MAX.(4X) R6.0MAX.(4X) SK-1016 0.19X0.03t(3X) 4.8X0.8t(3X) 9-3 0.276(2X) 7.0(2X) MOUNTING CUTOUT (FRONT MOUNTING) 0.984 0.004 1.090 POWER ENTRY MODULES RATED CURRENT (AT 250VAC) UNIT: INCH mm