Data Sheet SML-Z1 Series 3528（1411） 3.5×2.8mm（t=1.9mm） Features ・High brightness Color Type ・20/50mA guaranteed specifications ・PLCC2 package V U D Y M F P E B WB Specifications Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Min.*2 Typ. Max.*2 Max. Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) Part No. ■ SML-Z14VT(A) Red ■ SML-Z14UT(A) ■ SML-Z14DT(A) Orange ■ SML-Z14YT(A) Yellow ■ SML-Z14MT(A) Yellowish Green ■ SML-Z14FT(A) ■ SML-Z14PT(A) ■ SML-Z14V4T 1.9 20 10 12 2.0 175 70 - 12 -40 to +100 -40 to +100 Red ■ SML-Z14U4T ■ SML-Z14D4T Orange ■ SML-Z14Y4T Yellow ■ SML-Z14M4T Yellowish Green ■ SML-Z14F4T 2.0 50 100 12 2.1 Green ■ SML-Z14P4T ■ SMLZ13EDT(A) Bluish Green ■ SMLZ13BDT(A) Blue ■ SMLZ14WBECW(A) ■ SMLZ13WBDAW 120 30 5 -40 to +100 -40 to +100 3.3 20 3.2 10 5 120 100*1 White ■ SMLZ13WBDCW(A) 115 635 56 112 620 625 112 224 602 605 608 586 589 592 140 280 568 571 574 20 30 5 -40 to +100 -40 to +100 3.2 20 5 ■ SMLZ13WBDDW(A) 90 45 22.4 560 563 11.2 625 630 635 140 280 615 620 625 280 560 602 605 608 587 590 593 355 710 569 572 575 112 224 562 565 568 71 120 558 561 564 22.4 56 519 527 536 355 710 464 470 476 140 280 50 20 20 (x, y) (0.44, 0.40) 10 (x, y) (0.30, 0.28) 100 (x, y) (0.34, 0.34) 20 50 20 1400 2000 (x, y) (0.36, 0.36) 100 45 22.4 557 (x, y) (0.30, 0.28) InGaN on SiC ■ SMLZ13WBDBW 630 615 561.5 564 566.5 Green AIGaInP on GaAs 625 360 700 900 1400 20 ＊1:Duty1/10, 1kHz / ＊2:Reference Dimensions Recommended Solder Pattern Viewing Angle SML-Z1(V.U.D.Y.M.F.P) SML-Z1(WBD□W.BDT.EDT) 1.9 2.8 2.6 SML-Z14□4T Series / SML-Z14(A) Series 3.5 φ2.4 3.2 3.5 3.2 1.9 2.8 φ2.4 X Y 30° 20° 10° 0° 10° 20° Y’ ※Anode mark 80° ※Different according to the types of LED die Tolerance : ±0.2 （unit : mm） www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 50 0 50 RELATIVEINTENSITY INTENSITY (%)(%) RELATIVE 10° 0° 10° 20° 30° 40° 50° 60° 60° 70° 80° 20° 50° 60° 60° 90° 100 30° 40° Y’ 50° 70° 1.5 Y 40° 50° 1.5 (deg) SCANNING ANGLE Directivity (deg) X’ X 30° 40° ※Cathodemark SMLZ13 Series / SMLZ14WBECW(A) (deg) SCANNING ANGLE Directivity (deg) X’ 1.5 90° 100 70° 70° 80° 80° 90° 100 50 0 50 RELATIVEINTENSITY INTENSITY (%)(%) RELATIVE 90° 100 SMLZ14WBECW(A) SMLZ13 series （unit : mm） 1/4 2010.05 - Rev.B SML-Z1 Series Electrical Characteristics Curves Forward Current-Forward Voltage ■ ■SML-Z14VT(A) ■SML-Z14UT(A) ■SML-Z14DT(A) ■SML-Z14YT(A) ■SML-Z14MT(A) ■SML-Z14FT(A) ■SML-Z14PT(A) Ta=25°C 100 ■ ■ 10 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 ■SML-Z14V4T ■SML-Z14U4T ■SML-Z14D4T ■SML-Z14Y4T ■SML-Z14M4T ■SML-Z14F4T ■SML-Z14P4T 10 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 FORWARD VOLTAGE：VF (V) Ta=25°C 100 FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) ■ FORWARD CURRENT：IF (mA) Ta=25°C 100 ■ ■ SMLZ14WBECW ■ SMLZ13WBDAW ■ SMLZ13WBDBW ■ SMLZ13WBDCW(A) ■ SMLZ13WBDDW(A) ■ ■ ■SMLZ13EDT(A) ■SMLZ13BDT(A) ■ ■ SMLZ14WBECW ■ SMLZ13WBDAW ■ SMLZ13WBDBW ■ SMLZ13WBDCW(A) ■ SMLZ13WBDDW(A) 10 1 2.5 FORWARD VOLTAGE：VF (V) 2.7 2.9 3.1 3.3 3.5 FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature 1.4 1.2 1.0 ■SML-Z14VT(A) ■SML-Z14UT(A) ■SML-Z14DT(A) ■SML-Z14YT(A) ■SML-Z14MT(A) ■SML-Z14FT(A) ■SML-Z14PT(A) 0.8 0.6 0.4 0.2 -40 -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) IF=50mA 1.6 ■ 1.4 1.2 1.0 ■SML-Z14V4T ■SML-Z14U4T ■SML-Z14D4T ■SML-Z14Y4T ■SML-Z14M4T ■SML-Z14F4T ■SML-Z14P4T 0.8 0.6 0.4 0.2 -40 -20 0 20 40 60 80 IF=20mA 1.6 RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) ■ RELATIVE LUMINOUS INTENSITY (a.u) IF=20mA 1.6 100 1.4 ■SMLZ13EDT(A) ■SMLZ13BDT(A) 1.2 1.0 0.8 0.6 0.4 -40 ATMOSPHERE TEMPERATURE：Ta (°C) -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current 3.0 ■SML-Z14VT(A) ■SML-Z14UT(A) ■SML-Z14DT(A) ■SML-Z14YT(A) ■SML-Z14MT(A) ■SML-Z14FT(A) ■SML-Z14PT(A) 2.0 1.0 0 0 10 20 30 40 50 60 Ta=25°C 1.5 70 ■ ■ 1.0 ■SML-Z14V4T ■SML-Z14U4T ■SML-Z14D4T ■SML-Z14Y4T ■SML-Z14M4T ■SML-Z14F4T ■SML-Z14P4T 0.5 0 0 FORWARD CURRENT：IF (mA) 10 20 30 40 50 60 Ta=25°C 1.5 RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) ■ RELATIVE LUMINOUS INTENSITY (a.u.) Ta=25°C 4.0 70 ■ ■ SMLZ14WBECW ■ SMLZ13WBDAW ■ SMLZ13WBDBW ■ SMLZ13WBDCW(A) ■ SMLZ13WBDDW(A) ■SMLZ13EDT(A) ■SMLZ13BDT(A) 1.0 0.5 0.0 0 5 10 15 20 25 30 FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) Derating 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. ■ 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE：Ta (°C) 2/4 100 ■SML-Z14V4T ■SML-Z14U4T ■SML-Z14D4T ■SML-Z14Y4T ■SML-Z14M4T ■SML-Z14F4T ■SML-Z14P4T ■ MAXIMUM FORWARD CURRENT：IF (mA) 70 ■SML-Z14VT(A) ■SML-Z14UT(A) ■SML-Z14DT(A) ■SML-Z14YT(A) ■SML-Z14MT(A) ■SML-Z14FT(A) ■SML-Z14PT(A) MAXIMUM FORWARD CURRENT：IF (mA) MAXIMUM FORWARD CURRENT：IF (mA) ■ 80 40 30 ■ SMLZ14WBECW ■ SMLZ13WBDAW ■ SMLZ13WBDBW ■ SMLZ13WBDCW(A) ■ SMLZ13WBDDW(A) ■SMLZ13EDT(A) ■SMLZ13BDT(A) 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) 2010.05 - Rev.B SML-Z1 Series Rank Reference of Brightness SML-Z14＊T(A) Series Red (V, U) Luminous AH AJ AK AL AM AN AP Intensity Package size(mm) Height(mm) (mcd) 11.2 to 14 14 to 18 18 to 22.4 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 PLCC2 3528 AQ 56 to 71 （Ta=25˚C, IF＝20mA） AR AS AT AU AV AW AX AY 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 SML-Z14VT(A) SML-Z14UT(A) AQ 56 to 71 （Ta=25˚C, IF＝20mA） AR AS AT AU AV AW AX AY 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 SML-Z14DT(A) AQ 56 to 71 （Ta=25˚C, IF＝20mA） AR AS AT AU AV AW AX AY 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 SML-Z14YT(A) 1.9 Orange (D) PLCC2 Luminous AH AJ AK AL AM AN AP Intensity Package size(mm) Height(mm) (mcd) 11.2 to 14 14 to 18 18 to 22.4 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 3528 1.9 Yellow (Y) PLCC2 Luminous AH AJ AK AL AM AN AP Intensity Package size(mm) Height(mm) (mcd) 11.2 to 14 14 to 18 18 to 22.4 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 3528 1.9 Green (M, P, F) Luminous AH AJ AK AL AM AN AP Intensity Package size(mm) Height(mm) (mcd) 11.2 to 14 14 to 18 18 to 22.4 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 PLCC2 3528 （Ta=25˚C, IF＝20mA） AQ AR AS AT AU AV AW AX AY 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 SML-Z14MT(A) SML-Z14FT(A) 1.9 SML-Z14PT(A) SML-Z14＊4T Series Red (V, U) PLCC2 （Ta=25˚C, IF＝50mA） Luminous AL AM AN AP AQ AR AS AT AU AV AW AX AY AZ BA BB BC BD Intensity Package (mcd ) size(mm) Height(mm) 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 SML-Z14V4T 3528 1.9 SML-Z14U4T Orange (D) PLCC2 （Ta=25˚C, IF＝50mA） Luminous AL AM AN AP AQ AR AS AT AU AV AW AX AY AZ BA BB BC BD Intensity Package (mcd ) size(mm) Height(mm) 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 3528 1.9 SML-Z14D4T Yellow (Y) PLCC2 （Ta=25˚C, IF＝50mA） Luminous AL AM AN AP AQ AR AS AT AU AV AW AX AY AZ BA BB BC BD Intensity Package size(mm) Height(mm) (mcd) 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 3528 1.9 SML-Z14Y4T Green (M, P, F) PLCC2 （Ta=25˚C, IF＝50mA） Luminous AL AM AN AP AQ AR AS AT AU AV AW AX AY AZ BA BB BC BD Intensity Package (mcd ) size(mm) Height(mm) 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 SML-Z14M4T 3528 1.9 SML-Z14F4T SML-Z14P4T SMLZ13＊T(A) Series Green (E) PLCC2 （Ta=25˚C, IF＝20mA） Luminous AU AV AW AX AY AZ BA BB BC BD BE Intensity Package size(mm) Height(mm) (mcd) 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 SMLZ13EDT(A) 3528 1.9 Blue (B) PLCC2 （Ta=25˚C, IF＝20mA） Luminous AU AV AW AX AY AZ BA BB BC BD BE Intensity Package (mcd ) size(mm) Height(mm) 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 SMLZ13BDT(A) 3528 1.9 SMLZ1＊(White Series) White (WB) Luminous V Intensity Package size(mm) Height(mm) (mcd) 360 to 560 PLCC2 3528 www.rohm.com 1.9 （Ta=25˚C, IF＝20mA） W X1 X2 Y1 Y2 Z1 560 to 900 900 to 1120 1120 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 SMLZ14WBECW(A) SMLZ13WBDAW SMLZ13WBDBW SMLZ13WBDCW(A) SMLZ13WBDDW(A) © 2010 ROHM Co., Ltd. All rights reserved. 3/4 ＊Please note that the brightness of some products may fall between ranks (half rank). 2010.05 - Rev.B SML-Z1 Series Part No. Construction ∗ “−” will be taken out for emitting color W/B/E series. S M L Special Code will be applied for LED device. Z 1 4 Series name Package name 2 3 4 High Brightness Type Ultra High Brightness Type T M Chip Type Chromaticity rank(for white LED) Emitting Color T 8 6 Resin Color P Rank sign (Brightness Rank)∗ Taping Specifications V Red:630nm T Transparent Colorless T86 Cathode at sprocket hole side U Red:620nm W MilkyWhite D T87 Reverse of T86 Orange:605nm Y Yellow:587(590)nm M Yellowish-Green:572nm F Green:564nm P Green:560nm E Bluish-Green:527nm B Blue:470nm 1 For white LED, cathode at sprocket hole side WB White ∗ Concerning the Brightness rank • Please refer to the rank chart above for luminous intensity classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 4/4 2010.05 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A