SKS 215N B6C 145 V16 Electrical Characteristics Symbol Conditions min Electrical Data TAMBIENT = 45°C ; No overload ID Maximum DC current VAC Maximum AC voltage (+/-10%) VBUS DC Bus voltage Maximum stack power PTOTAL Stack power loss (TAMBIENT = 45°C) PLOSS Environnmental Data Symbol Thyristor Stud stack Conditions typ max 215 500 670 145 min Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution Degree EN 50178 Unit A VAC VDC kW W typ max 10051802.01.A ~13.59 1 000 IP00 2 Unit kg m - SEMISTACK® CLASSICS - B6C Three phase controlled rectifier Stack Protection Symbol Preliminary Data RC Circuit Ordering No. Description 08785016 SKS 215N B6C 145 V16 Type R C Conditions RC in parallel with each electrical switch Resistance (11W) min typ RC32 100 0.1 max Unit Ohm µF Features • Non-isolated power stacks • SKT 160/16 • Heatsink P1/150 M16 • Natural cooling • RC circuit included Typical Applications • Regulated power supplies • Alternator excitation • Motor control Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6C © by SEMIKRON Rev. 1 - 06.08.2015 1 SKS 215N B6C 145 V16 Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 1 - 06.08.2015 2