Tantalum Polymer Through-Hole Capacitors PRODUCTS Electronic Components T550 Axial Polymer Hermetic Seal (PHS) and DLA Series Why Choose KEMET Programs Supported KEMET Corporation is a leading global supplier of electronic components. We offer our customers the broadest selection of capacitor technologies in the industry, along with an expanding range of electromechanical devices, electromagnetic compatibility solutions and supercapacitors. Our vision is to be the preferred supplier of electronic component solutions for customers demanding the highest standards of quality, delivery and service. High voltage power management applications such as: Features & Benefits • Includes F-Tech anode which eliminates hidden defects in the dielectric • 100% Simulated Breakdown Screening • Voltage rating: 6 to 75 VDC • Polymer cathode technology • ≤ 0.0075 CV (µA) at rated voltage after 5 minutes • Extremely low ESR • High frequency capacitance retention • Low temperature capacitance retention • 100% accelerated steady state aging • 100% surge current tested • Volumetrically efficient • Use of up to 80% of rated voltage • Non-ignition failure mode • Approximately 25% lighter than equivalent wet tantalum • Case dimensions equivalent to MIL-PRF-39006/25 • Capacitance: 20 to 820 µF • Meets all requirements of DLA Drawing 13030 • • • • Buck boost converters Filtering Hold-up capacitors Other high ripple current applications Advantages Over Wet Tantalum • • • • • Up to 90% lower ESR Approximately 40% increased ripple current capabilities Approximately 25% lighter package Improved capacitance retention at high frequency and low temperature Improved shock and vibration handling Comparison of ESR in Polymer Hermetic Seal and Wet Tantalum capacitors Product Checklist • What is the actual required capacitance? • What is the operating temperature and frequency? • What is the actual operating voltage? • Are there any voltage spikes or reverse voltage expected? • Are there any mechanical robustness concerns, such as vibration or shock? • What are the ESR requirements? For more information, samples and engineering kits, please visit us at www.kemet.com or call 1.877.myKEMET. SA0914 Comparison of capacitance in Polymer Hermetic Seal and Wet Tantalum capacitors Comparison of reverse voltage in Polymer Hermetic Seal and Wet Tantalum capacitors Copyright © 2014 KEMET Tantalum Polymer Through-Hole Capacitors PRODUCTS Electronic Components T550 Axial Polymer Hermetic Seal (PHS) and DLA Series Ratings & Part Number Reference Rated Capacitance (µF) Case Sizes KEMET Part Number DC Leakage µA @ 25°C max/5 mins DF% @ 25°C 120 Hz Max Maximum ESR mΩ @25°C 100 kHz Ripple Current mArms @ 85°C/40 kHz 1/ DLA (DSCC) Drawing Number 6 140 B T550B147(1)006A(3) 6.3 5.0 120 1,510 N/A 6 820 B T550B827(1)006A(3) 36.9 5.0 90 1,750 N/A 8 220 B T550B227(1)008A(3) 13.2 5.0 120 1,510 N/A 8 680 B T550B687(1)008A(3) 40.8 5.0 90 1,750 N/A 10 100 B T550B107(1)010A(3) 7.5 5.0 140 1,400 N/A 10 180 B T550B187(1)010A(3) 13.5 5.0 110 1,580 N/A 10 560 B T550B567(1)010A(3) 42.0 5.0 90 1,750 N/A 15 70 B T550B706(1)015A(3) 7.9 5.0 140 1,400 N/A 15 120 B T550B127(1)015A(3) 13.5 5.0 110 1,580 N/A 15 390 B T550B397(1)015A(3) 43.9 5.0 90 1,750 N/A 25 50 B T550B506(1)025A(3) 9.4 5.0 170 1,275 N/A 25 100 B T550B107(1)025(2)(3) 18.8 5.0 190 1,200 13030-01(1)A(4)(5)(6) 30 40 B T550B406(1)030A(3) 9.0 5.0 170 1,275 N/A 30 68 B T550B686(1)030A(3) 15.3 5.0 140 1,400 N/A 40 100 B T550B107(1)040(2)(3) 30.0 5.0 150 1,350 13030-02(1)A(4)(5)(6) 40 120 B T550B127(1)040(2)(3) 36.0 5.0 120 1,510 13030-03(1)A(4)(5)(6) 50 25 B T550B256(1)050A(3) 9.4 5.0 170 1,275 N/A 50 47 B T550B476(1)050A(3) 17.6 5.0 150 1,350 N/A 50 100 B T550B107(1)050(2)(3) 37.5 5.0 130 1,450 13030-04(1)A(4)(5)(6) 50 120 B T550B127(1)050(2)(3) 45.0 5.0 90 1,750 13030-05(1)A(4)(5)(6) 60 20 B T550B206(1)060A(3) 9.0 5.0 200 1,175 N/A 60 39 B T550B396(1)060A(3) 17.6 5.0 160 1,310 N/A 60 100 B T550B107(1)060A(3) 45.0 5.0 100 1,660 N/A 75 75 B T550B756(1)075A(3) 42.2 5.0 110 1,580 N/A Rated Voltage (V) (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert A = N/A, B= standard reliability, or T = high reliability. (3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. (4) To complete the DLA PIN number , insert the insulation option. S= Sleeved, U= Unseleeved. (5)To complete the DLA PIN number, insert the lead length option. L=1.50 in (6)To complete the DLA PIN number, insert the product level option. B = standard reliability or T= high reliability. T 550 B 107 M 025 A T 4251 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material Surge Option 550 = Polymer Hermetic Seal B First two digits represent significant figures. Third digit specifies number of zeros. K = ±10% M = ±20% T = Tantalum 006 = 6.3 V 008 = 8 V 015 = 15 V 025 = 25 V 040 = 40 V 050 = 50 V 060 = 60 V 075 = 75 V A = N/A T = 100% tin (Sn) plated B = Standard reliability* H = Tin/lead (SnPb) solder coated (5% Pb minimum) T = High reliability* 4250 = Surge current, 10 cycles +25°C 4251 = Surge current, 10 cycles, -55°C and +85°C * Failure rate applies only to DLA part numbers 13030 -01 K A S L B Drawing Number Dash Number Capacitance Tolerance Surge Current Testing Insulation Lead Length Level K = ±10% M = ±20% A = +25°C ± 5°C, 10 cycles, after constant voltage conditioning S = Sleeved U = Unsleeved L = 1.50 inches (standard) B = Standard reliability T = 2.25 inches (optional) T = High reliability See Part Numbers list SA0914 Copyright © 2014 KEMET