RoHS SCM15 0.077±0.008 (2±0.2) Common Mode Choke 0.099±0.008 (2.5±0.2) .081 (2.05) 0.23 (0.58) 0.018 (0.58) Inches (mm) Impedance Z (Ω) Tolerance (±%) Test Freq. (MHz) 600 20 100 0.123 (3.1) 0.063 (1.6) 0.099±0.008 (2.5±0.2) Dimensions: 0.004 (0.9) Pad Layout Features • Minature SMD common mode filter • Excellent noise attenuation in a small package • Suitable for automated assembly • Excellent solderability Allied Part Number SCM15-601M-RC Insulation Rated Voltage Resistance Vdc (M Ω) (min) 50 10 DCR Max. (Ω) IDC (mA) 0.45 0.3 All specifications subject to change without notice. Electrical Impedance range: 600 Ω Tolerance: 20% Test Frequency: 100Mhz Operating Temp: -40ºC ~ 105ºC IDC: Inductance drop 10% Typ. from original value with no current DCR: Single Wire Test Value SCHEMATIC Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC peak for 10 sec. Test time: 6 minutes Test Equipment (Z): HP4286A / HP4287A / Agilent E4991A (DCR): Chen Hwa 502BC Insulation Resistance: HP4339B (IDC): HP4284A with HP42841A / HP4285A with HP42841A NO POLARITY EQUIVALENT CIRCUIT Physical Packaging: 2000 pieces per 7 inch reel Marking: None 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 07/20/2015 www.alliedcomponents.com