RoHS T1/CEPT/ISDN - Primary LAN Filter Module AHTA-2009I Ethernet based LAN, WAN and other networking applications Cw/w: 35PF Max TX & RX @100KHz, 0.2V LL: 0.6µH Max TX & RX @ 100KHz, 0.2V Primary Pins: TX: 1-3, 6-8 RX: 4-5, 9-10 Polarity: 1-20, 4-17, 6-15, 9-12 In-Phase Operating Temp: -40ºC to +85ºC Electrical Speciļ¬cations @ 25°C Part Number AHTA-2009I OCL(µH Min TX & RX) @ 100KHz, 100mV With 8mA DC Bias 1200 Turns Ratio chip: cable (±2%) Isolation HI-POT (Vrms) 1:2(TX)/1:1(RX) 1500 All specifications subject to change without notice. MECHANICAL ALLIED AHTA-2009I 0.300(7.62) 0.395(10.03) DATECODE 1.000(25.40) 0.118(3.00) 0.268(6.80) max 0.020 (0.50) 0.100(2.54) 0.900(22.86) Dimensions:inch( mm) Unless otherwise specified, all tolerances are ±0.010(0.25) 714-665-1140 17 16 15 13 12 4 5 6 8 9 REVISED 15 02/15/13 11 18 3 ALLIED COMPONENTS INTERNATIONAL 10 20 1 SCHEMATICS www.alliedcomponents.com