RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB UP 10/100 Base -T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards for 100Base-T Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265°C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0ºC to +70ºC Electrical Speciļ¬cations @ 25°C Part Number ARB029-C2B4S OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Insertion Loss (dB Max) 0.5-100MHz 1.1 Turns Ratio chip: cable (±3%) 1CT:1CT Return Loss (dB Min) 30.1-60MHz 18-20*log(f/30) 0.5-30MHz 18 60.1-80MHz 12 Electrical Speciļ¬cations @ 25°C Part Number EMI Fingers LED (L/R) ARB029-C2B4S YES G-O/Y 1-30MHz 40 Cross Talk (dB Min) 30-60MHz 35 CMRR (dB Min) 1-50MHz 50.1-150MHz 30 20 60.1-100MHz 30 HI-POT (VDC) 2250 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: ±0.25 in mm ARB029-C2B4S 3.30 YELLOW 13.45 GREEN / ORANGE ALLIED ARB029-C2B4S YYWW 25.73±0.4 16.80 7.75 714-665-1140 14.35 ALLIED COMPONENTS INTERNATIONAL 01/07/11 15 2.90 3.17 2.54 www.alliedcomponents.com RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB UP SCHEMATICS ARB029-C2B4S 1CT:1CT 1CT:1CT Notes: 1. R1-R4=75OHMS,1/16W,5%Resistors. 2. C1=1000pF,2KV Decouping Capacitor. 3. LED Compliant With IEC60825-1 Saftety of Laser Products When operated Up to 20mA. 4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW, LED Peak Wavelength: Green=565nm, Yellow=585nm, Orange=605nm. PCB LAYOUT Unless otherwise specified all tolerances are: ±0.05 in mm ARB029-C2B4S MATERIALS ARB029-C2B4S Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.2mm thick, 30 ~ 80u" Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, plated 30u" Au. LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 01/07/11 15 www.alliedcomponents.com