RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN 10/100 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265°C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0ºC to +70ºC (see footnote) Industrial operating temp: -40ºC to +85ºC (see footnote) Electrical Specifications @ 25°C Part Number AR1010-1326_ OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Insertion Loss (dB Max) 0.5-100MHz 1.0 Turns Ratio chip: cable (±3%) 1CT:1CT Return Loss (dB Min) 30.1-60MHz 16 0.5-40MHz 18 40.1-80MHz 12 Electrical Specifications @ 25°C Part Number EMI Fingers LED (L/R) AR1010-1326_ YES G/Y Cross Talk (dB Min) 0.5-100MHz 35 CMRR (dB Min) 0.5-100MHz HI-POT (VDC) 30 2250 *Complete part number by inserting “S” for Standard Temp. or “I” for Industrial Temp. All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: ±0.25 in mm AR1010-1326_ 21.60 Max LED-L GREEN LED-R YELLOW 3.5 13.50 15.90 4.90 3.38 2.54 3.05 P9 P10 P11 P12 8.89 ALLIED AR1010-1326_ YYWW P1 P8 Back View 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/06/11 www.alliedcomponents.com RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN SCHEMATICS AR1010-1326_ 1CT:1CT 1CT:1CT GREEN YELLOW P9 P11 P10 P12 Notes: 1. R1-R4=75OHMS,1/16W,5% Resistors. 2. C1=1000pF,2KV Decouping Capacitor. 3. LED Compliant With IEC60825-1 Saftety of Laser Products When operated Up to 20mA. 4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW, LED Peak Wavelength: Green=565nm, Yellow=585nm. PCB LAYOUT Unless otherwise specified all tolerances are: ±0.05 in mm AR1010-1326_ 1.27 8 3. 05 2 1 4. 90 8. 89 2. 54 8.89 3. 38 9 7 11 10 12 7. 57 2. 54 11. 43 15. 49 MATERIALS AR1010-1326_ Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.20mm thick, 50u"Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, Gold Flash plating. LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/06/11 www.alliedcomponents.com