http://www.alliedcomponents.com/RJ45_pdf/ARB533-5412S.pdf

RoHS
Single Port RJ45 CONNECTOR
WITH INTEGRATED MAGNETICS, TAB UP
10/100/1000 Base-T Ethernet Application
Meets IEEE 802.3 & ANSI X 3.263 standards
Impedance: 100OHMS
Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias
Always EU RoHS/ELV Compliant, wave solder capable to 265°C
RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F
Standard operating temp: 0ºC to +70ºC
Electrical Specifications @ 25°C
Part
Number
ARB533-5412S
OCL(uH Min)
@ 100kHz, 0.1V
With 8mA DC Bias
350
Insertion Loss
(dB Max)
0.5-100MHz
1.1
Turns Ratio
chip: cable
(±3%)
1CT:1CT
Return Loss
(dB Min)
0.5-40MHz
18
40.1-100MHz
12-20*log(f/80)
Electrical Specifications @ 25°C
Part
Number
EMI
Fingers
ARB533-5412S
YES
Cross Talk
(dB Min)
0.5-40MHz
40.1-100MHz
35
33-20*log(f/50)
LED
(L/R)
G/Y
CMRR
(dB Min)
0.5-100MHz
HI-POT
(VDC)
30
2250
All specifications subject to change without notice.
MECHANICAL
Unless otherwise specified all tolerances are: ±0.25 in mm
ARB533-5412S
16.2 [0.638]
25.4 [1.000]
13.5 [0.531]
3.3 [0.130]
LED-R
YELLOW
LED-L
GREEN
RJ1
RJ8
10.8 [0.425]
2.54 [0.100]
3.05 [0.120]
ALLIED
ARB533-5412S
L1
YYWW
P10
P2
P1
P9
L3
L2
L4
5.85
714-665-1140
Back View
ALLIED COMPONENTS INTERNATIONAL
01/07/11
15
www.alliedcomponents.com
RoHS
Single Port RJ45 CONNECTOR
WITH INTEGRATED MAGNETICS, TAB UP
SCHEMATICS
ARB533-5412S
L1
Notes:
L3
GREEN
YELLOW
L2
L4
1.R1-R4=75OHMS,1/16W,5%Resistors.
2.C1=1000pF,2KV Decoupling Capacitor.
3.LED Compliant With IEC60825-1 Safety of Laser Products When operated up to 20mA.
4.LED Forward Voltage: 2.1V(TYP).LED Power Dissipation: 105mW.LED Peak Wavelength: Green=565nm, Yellow=585nm.
PCB LAYOUT
Unless otherwise specified all tolerances are: ±0.05 in mm
ARB533-5412S
10.93 [0.430]
8.89 [0.350]
1.27 [0.050]
5.85 [0.230]
4- 1.02
10- 0.89
13.72 [0.540]
15.8 [0.622]
6.35 [0.250]
11.43 [0.450]
8.89 [0.350]
2- 3.25
3.05 [0.120]
2- 1.63
MATERIALS
ARB533-5412S
Housing: PBT, Flammability Rating 94V-O.
Shell: C2680 Brass, 0.2mm thick, 50u”Min nickel plating.
Mold Jack Contacts: Phosphor Bronze, 6u” Glod Plated.
LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads.
714-665-1140
ALLIED COMPONENTS INTERNATIONAL
01/07/11
15
www.alliedcomponents.com